| /* | |
| * Copyright (C) 2008 The Android Open Source Project | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in | |
| * the documentation and/or other materials provided with the | |
| * distribution. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS | |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE | |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, | |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, | |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS | |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED | |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT | |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | |
| * SUCH DAMAGE. | |
| */ | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <unistd.h> | |
| #include <string.h> | |
| #include <sys/ioctl.h> | |
| #include <sys/stat.h> | |
| #include <sys/types.h> | |
| #include <dirent.h> | |
| #include <fcntl.h> | |
| #include <errno.h> | |
| #include <pthread.h> | |
| #include <ctype.h> | |
| #include <linux/usbdevice_fs.h> | |
| #include <linux/usbdevice_fs.h> | |
| #include <linux/version.h> | |
| #if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 20) | |
| #include <linux/usb/ch9.h> | |
| #else | |
| #include <linux/usb_ch9.h> | |
| #endif | |
| #include <asm/byteorder.h> | |
| #include "fastboot.h" | |
| #include "usb.h" | |
| #define MAX_RETRIES 5 | |
| /* Timeout in seconds for usb_wait_for_disconnect. | |
| * It doesn't usually take long for a device to disconnect (almost always | |
| * under 2 seconds) but we'll time out after 3 seconds just in case. | |
| */ | |
| #define WAIT_FOR_DISCONNECT_TIMEOUT 3 | |
| #ifdef TRACE_USB | |
| #define DBG1(x...) fprintf(stderr, x) | |
| #define DBG(x...) fprintf(stderr, x) | |
| #else | |
| #define DBG(x...) | |
| #define DBG1(x...) | |
| #endif | |
| /* The max bulk size for linux is 16384 which is defined | |
| * in drivers/usb/core/devio.c. | |
| */ | |
| #define MAX_USBFS_BULK_SIZE (16 * 1024) | |
| struct usb_handle | |
| { | |
| char fname[64]; | |
| int desc; | |
| unsigned char ep_in; | |
| unsigned char ep_out; | |
| }; | |
| /* True if name isn't a valid name for a USB device in /sys/bus/usb/devices. | |
| * Device names are made up of numbers, dots, and dashes, e.g., '7-1.5'. | |
| * We reject interfaces (e.g., '7-1.5:1.0') and host controllers (e.g. 'usb1'). | |
| * The name must also start with a digit, to disallow '.' and '..' | |
| */ | |
| static inline int badname(const char *name) | |
| { | |
| if (!isdigit(*name)) | |
| return 1; | |
| while(*++name) { | |
| if(!isdigit(*name) && *name != '.' && *name != '-') | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int check(void *_desc, int len, unsigned type, int size) | |
| { | |
| struct usb_descriptor_header *hdr = (struct usb_descriptor_header *)_desc; | |
| if(len < size) return -1; | |
| if(hdr->bLength < size) return -1; | |
| if(hdr->bLength > len) return -1; | |
| if(hdr->bDescriptorType != type) return -1; | |
| return 0; | |
| } | |
| static int filter_usb_device(char* sysfs_name, | |
| char *ptr, int len, int writable, | |
| ifc_match_func callback, | |
| int *ept_in_id, int *ept_out_id, int *ifc_id) | |
| { | |
| struct usb_device_descriptor *dev; | |
| struct usb_config_descriptor *cfg; | |
| struct usb_interface_descriptor *ifc; | |
| struct usb_endpoint_descriptor *ept; | |
| struct usb_ifc_info info; | |
| int in, out; | |
| unsigned i; | |
| unsigned e; | |
| if (check(ptr, len, USB_DT_DEVICE, USB_DT_DEVICE_SIZE)) | |
| return -1; | |
| dev = (struct usb_device_descriptor *)ptr; | |
| len -= dev->bLength; | |
| ptr += dev->bLength; | |
| if (check(ptr, len, USB_DT_CONFIG, USB_DT_CONFIG_SIZE)) | |
| return -1; | |
| cfg = (struct usb_config_descriptor *)ptr; | |
| len -= cfg->bLength; | |
| ptr += cfg->bLength; | |
| info.dev_vendor = dev->idVendor; | |
| info.dev_product = dev->idProduct; | |
| info.dev_class = dev->bDeviceClass; | |
| info.dev_subclass = dev->bDeviceSubClass; | |
| info.dev_protocol = dev->bDeviceProtocol; | |
| info.writable = writable; | |
| snprintf(info.device_path, sizeof(info.device_path), "usb:%s", sysfs_name); | |
| /* Read device serial number (if there is one). | |
| * We read the serial number from sysfs, since it's faster and more | |
| * reliable than issuing a control pipe read, and also won't | |
| * cause problems for devices which don't like getting descriptor | |
| * requests while they're in the middle of flashing. | |
| */ | |
| info.serial_number[0] = '\0'; | |
| if (dev->iSerialNumber) { | |
| char path[80]; | |
| int fd; | |
| snprintf(path, sizeof(path), | |
| "/sys/bus/usb/devices/%s/serial", sysfs_name); | |
| path[sizeof(path) - 1] = '\0'; | |
| fd = open(path, O_RDONLY); | |
| if (fd >= 0) { | |
| int chars_read = read(fd, info.serial_number, | |
| sizeof(info.serial_number) - 1); | |
| close(fd); | |
| if (chars_read <= 0) | |
| info.serial_number[0] = '\0'; | |
| else if (info.serial_number[chars_read - 1] == '\n') { | |
| // strip trailing newline | |
| info.serial_number[chars_read - 1] = '\0'; | |
| } | |
| } | |
| } | |
| for(i = 0; i < cfg->bNumInterfaces; i++) { | |
| while (len > 0) { | |
| struct usb_descriptor_header *hdr = (struct usb_descriptor_header *)ptr; | |
| if (check(hdr, len, USB_DT_INTERFACE, USB_DT_INTERFACE_SIZE) == 0) | |
| break; | |
| len -= hdr->bLength; | |
| ptr += hdr->bLength; | |
| } | |
| if (len <= 0) | |
| return -1; | |
| ifc = (struct usb_interface_descriptor *)ptr; | |
| len -= ifc->bLength; | |
| ptr += ifc->bLength; | |
| in = -1; | |
| out = -1; | |
| info.ifc_class = ifc->bInterfaceClass; | |
| info.ifc_subclass = ifc->bInterfaceSubClass; | |
| info.ifc_protocol = ifc->bInterfaceProtocol; | |
| for(e = 0; e < ifc->bNumEndpoints; e++) { | |
| while (len > 0) { | |
| struct usb_descriptor_header *hdr = (struct usb_descriptor_header *)ptr; | |
| if (check(hdr, len, USB_DT_ENDPOINT, USB_DT_ENDPOINT_SIZE) == 0) | |
| break; | |
| len -= hdr->bLength; | |
| ptr += hdr->bLength; | |
| } | |
| if (len < 0) { | |
| break; | |
| } | |
| ept = (struct usb_endpoint_descriptor *)ptr; | |
| len -= ept->bLength; | |
| ptr += ept->bLength; | |
| if((ept->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) | |
| continue; | |
| if(ept->bEndpointAddress & USB_ENDPOINT_DIR_MASK) { | |
| in = ept->bEndpointAddress; | |
| } else { | |
| out = ept->bEndpointAddress; | |
| } | |
| // For USB 3.0 devices skip the SS Endpoint Companion descriptor | |
| if (check((struct usb_descriptor_hdr *)ptr, len, | |
| USB_DT_SS_ENDPOINT_COMP, USB_DT_SS_EP_COMP_SIZE) == 0) { | |
| len -= USB_DT_SS_EP_COMP_SIZE; | |
| ptr += USB_DT_SS_EP_COMP_SIZE; | |
| } | |
| } | |
| info.has_bulk_in = (in != -1); | |
| info.has_bulk_out = (out != -1); | |
| if(callback(&info) == 0) { | |
| *ept_in_id = in; | |
| *ept_out_id = out; | |
| *ifc_id = ifc->bInterfaceNumber; | |
| return 0; | |
| } | |
| } | |
| return -1; | |
| } | |
| static int read_sysfs_string(const char *sysfs_name, const char *sysfs_node, | |
| char* buf, int bufsize) | |
| { | |
| char path[80]; | |
| int fd, n; | |
| snprintf(path, sizeof(path), | |
| "/sys/bus/usb/devices/%s/%s", sysfs_name, sysfs_node); | |
| path[sizeof(path) - 1] = '\0'; | |
| fd = open(path, O_RDONLY); | |
| if (fd < 0) | |
| return -1; | |
| n = read(fd, buf, bufsize - 1); | |
| close(fd); | |
| if (n < 0) | |
| return -1; | |
| buf[n] = '\0'; | |
| return n; | |
| } | |
| static int read_sysfs_number(const char *sysfs_name, const char *sysfs_node) | |
| { | |
| char buf[16]; | |
| int value; | |
| if (read_sysfs_string(sysfs_name, sysfs_node, buf, sizeof(buf)) < 0) | |
| return -1; | |
| if (sscanf(buf, "%d", &value) != 1) | |
| return -1; | |
| return value; | |
| } | |
| /* Given the name of a USB device in sysfs, get the name for the same | |
| * device in devfs. Returns 0 for success, -1 for failure. | |
| */ | |
| static int convert_to_devfs_name(const char* sysfs_name, | |
| char* devname, int devname_size) | |
| { | |
| int busnum, devnum; | |
| busnum = read_sysfs_number(sysfs_name, "busnum"); | |
| if (busnum < 0) | |
| return -1; | |
| devnum = read_sysfs_number(sysfs_name, "devnum"); | |
| if (devnum < 0) | |
| return -1; | |
| snprintf(devname, devname_size, "/dev/bus/usb/%03d/%03d", busnum, devnum); | |
| return 0; | |
| } | |
| static usb_handle *find_usb_device(const char *base, ifc_match_func callback) | |
| { | |
| usb_handle *usb = 0; | |
| char devname[64]; | |
| char desc[1024]; | |
| int n, in, out, ifc; | |
| DIR *busdir; | |
| struct dirent *de; | |
| int fd; | |
| int writable; | |
| busdir = opendir(base); | |
| if(busdir == 0) return 0; | |
| while((de = readdir(busdir)) && (usb == 0)) { | |
| if(badname(de->d_name)) continue; | |
| if(!convert_to_devfs_name(de->d_name, devname, sizeof(devname))) { | |
| // DBG("[ scanning %s ]\n", devname); | |
| writable = 1; | |
| if((fd = open(devname, O_RDWR)) < 0) { | |
| // Check if we have read-only access, so we can give a helpful | |
| // diagnostic like "adb devices" does. | |
| writable = 0; | |
| if((fd = open(devname, O_RDONLY)) < 0) { | |
| continue; | |
| } | |
| } | |
| n = read(fd, desc, sizeof(desc)); | |
| if(filter_usb_device(de->d_name, desc, n, writable, callback, | |
| &in, &out, &ifc) == 0) { | |
| usb = calloc(1, sizeof(usb_handle)); | |
| strcpy(usb->fname, devname); | |
| usb->ep_in = in; | |
| usb->ep_out = out; | |
| usb->desc = fd; | |
| n = ioctl(fd, USBDEVFS_CLAIMINTERFACE, &ifc); | |
| if(n != 0) { | |
| close(fd); | |
| free(usb); | |
| usb = 0; | |
| continue; | |
| } | |
| } else { | |
| close(fd); | |
| } | |
| } | |
| } | |
| closedir(busdir); | |
| return usb; | |
| } | |
| int usb_write(usb_handle *h, const void *_data, int len) | |
| { | |
| unsigned char *data = (unsigned char*) _data; | |
| unsigned count = 0; | |
| struct usbdevfs_bulktransfer bulk; | |
| int n; | |
| if(h->ep_out == 0 || h->desc == -1) { | |
| return -1; | |
| } | |
| do { | |
| int xfer; | |
| xfer = (len > MAX_USBFS_BULK_SIZE) ? MAX_USBFS_BULK_SIZE : len; | |
| bulk.ep = h->ep_out; | |
| bulk.len = xfer; | |
| bulk.data = data; | |
| bulk.timeout = 0; | |
| n = ioctl(h->desc, USBDEVFS_BULK, &bulk); | |
| if(n != xfer) { | |
| DBG("ERROR: n = %d, errno = %d (%s)\n", | |
| n, errno, strerror(errno)); | |
| return -1; | |
| } | |
| count += xfer; | |
| len -= xfer; | |
| data += xfer; | |
| } while(len > 0); | |
| return count; | |
| } | |
| int usb_read(usb_handle *h, void *_data, int len) | |
| { | |
| unsigned char *data = (unsigned char*) _data; | |
| unsigned count = 0; | |
| struct usbdevfs_bulktransfer bulk; | |
| int n, retry; | |
| if(h->ep_in == 0 || h->desc == -1) { | |
| return -1; | |
| } | |
| while(len > 0) { | |
| int xfer = (len > MAX_USBFS_BULK_SIZE) ? MAX_USBFS_BULK_SIZE : len; | |
| bulk.ep = h->ep_in; | |
| bulk.len = xfer; | |
| bulk.data = data; | |
| bulk.timeout = 0; | |
| retry = 0; | |
| do{ | |
| DBG("[ usb read %d fd = %d], fname=%s\n", xfer, h->desc, h->fname); | |
| n = ioctl(h->desc, USBDEVFS_BULK, &bulk); | |
| DBG("[ usb read %d ] = %d, fname=%s, Retry %d \n", xfer, n, h->fname, retry); | |
| if( n < 0 ) { | |
| DBG1("ERROR: n = %d, errno = %d (%s)\n",n, errno, strerror(errno)); | |
| if ( ++retry > MAX_RETRIES ) return -1; | |
| sleep( 1 ); | |
| } | |
| } | |
| while( n < 0 ); | |
| count += n; | |
| len -= n; | |
| data += n; | |
| if(n < xfer) { | |
| break; | |
| } | |
| } | |
| return count; | |
| } | |
| void usb_kick(usb_handle *h) | |
| { | |
| int fd; | |
| fd = h->desc; | |
| h->desc = -1; | |
| if(fd >= 0) { | |
| close(fd); | |
| DBG("[ usb closed %d ]\n", fd); | |
| } | |
| } | |
| int usb_close(usb_handle *h) | |
| { | |
| int fd; | |
| fd = h->desc; | |
| h->desc = -1; | |
| if(fd >= 0) { | |
| close(fd); | |
| DBG("[ usb closed %d ]\n", fd); | |
| } | |
| return 0; | |
| } | |
| usb_handle *usb_open(ifc_match_func callback) | |
| { | |
| return find_usb_device("/sys/bus/usb/devices", callback); | |
| } | |
| /* Wait for the system to notice the device is gone, so that a subsequent | |
| * fastboot command won't try to access the device before it's rebooted. | |
| * Returns 0 for success, -1 for timeout. | |
| */ | |
| int usb_wait_for_disconnect(usb_handle *usb) | |
| { | |
| double deadline = now() + WAIT_FOR_DISCONNECT_TIMEOUT; | |
| while (now() < deadline) { | |
| if (access(usb->fname, F_OK)) | |
| return 0; | |
| usleep(50000); | |
| } | |
| return -1; | |
| } |