| /* |
| * Copyright (C) 2017 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // This file contains the functions that initialize SELinux during boot as well as helper functions |
| // for SELinux operation for init. |
| |
| // When the system boots, there is no SEPolicy present and init is running in the kernel domain. |
| // Init loads the SEPolicy from the file system, restores the context of /system/bin/init based on |
| // this SEPolicy, and finally exec()'s itself to run in the proper domain. |
| |
| // The SEPolicy on Android comes in two variants: monolithic and split. |
| |
| // The monolithic policy variant is for legacy non-treble devices that contain a single SEPolicy |
| // file located at /sepolicy and is directly loaded into the kernel SELinux subsystem. |
| |
| // The split policy is for supporting treble devices. It splits the SEPolicy across files on |
| // /system/etc/selinux (the 'plat' portion of the policy) and /vendor/etc/selinux (the 'nonplat' |
| // portion of the policy). This is necessary to allow the system image to be updated independently |
| // of the vendor image, while maintaining contributions from both partitions in the SEPolicy. This |
| // is especially important for VTS testing, where the SEPolicy on the Google System Image may not be |
| // identical to the system image shipped on a vendor's device. |
| |
| // The split SEPolicy is loaded as described below: |
| // 1) There is a precompiled SEPolicy located at either /vendor/etc/selinux/precompiled_sepolicy or |
| // /odm/etc/selinux/precompiled_sepolicy if odm parition is present. Stored along with this file |
| // are the sha256 hashes of the parts of the SEPolicy on /system and /product that were used to |
| // compile this precompiled policy. The system partition contains a similar sha256 of the parts |
| // of the SEPolicy that it currently contains. Symmetrically, product paritition contains a |
| // sha256 of its SEPolicy. System loads this precompiled_sepolicy directly if and only if hashes |
| // for system policy match and hashes for product policy match. |
| // 2) If these hashes do not match, then either /system or /product (or both) have been updated out |
| // of sync with /vendor and the init needs to compile the SEPolicy. /system contains the |
| // SEPolicy compiler, secilc, and it is used by the LoadSplitPolicy() function below to compile |
| // the SEPolicy to a temp directory and load it. That function contains even more documentation |
| // with the specific implementation details of how the SEPolicy is compiled if needed. |
| |
| #include "selinux.h" |
| |
| #include <android/api-level.h> |
| #include <fcntl.h> |
| #include <stdlib.h> |
| #include <sys/wait.h> |
| #include <unistd.h> |
| |
| #include <android-base/chrono_utils.h> |
| #include <android-base/file.h> |
| #include <android-base/logging.h> |
| #include <android-base/parseint.h> |
| #include <android-base/unique_fd.h> |
| #include <cutils/android_reboot.h> |
| #include <fs_avb/fs_avb.h> |
| #include <selinux/android.h> |
| |
| #include "reboot_utils.h" |
| #include "util.h" |
| |
| using namespace std::string_literals; |
| |
| using android::base::ParseInt; |
| using android::base::Timer; |
| using android::base::unique_fd; |
| using android::fs_mgr::AvbHandle; |
| |
| namespace android { |
| namespace init { |
| |
| namespace { |
| |
| selabel_handle* sehandle = nullptr; |
| |
| enum EnforcingStatus { SELINUX_PERMISSIVE, SELINUX_ENFORCING }; |
| |
| EnforcingStatus StatusFromCmdline() { |
| EnforcingStatus status = SELINUX_ENFORCING; |
| |
| import_kernel_cmdline(false, |
| [&](const std::string& key, const std::string& value, bool in_qemu) { |
| if (key == "androidboot.selinux" && value == "permissive") { |
| status = SELINUX_PERMISSIVE; |
| } |
| }); |
| |
| return status; |
| } |
| |
| bool IsEnforcing() { |
| if (ALLOW_PERMISSIVE_SELINUX) { |
| return StatusFromCmdline() == SELINUX_ENFORCING; |
| } |
| return true; |
| } |
| |
| // Forks, executes the provided program in the child, and waits for the completion in the parent. |
| // Child's stderr is captured and logged using LOG(ERROR). |
| bool ForkExecveAndWaitForCompletion(const char* filename, char* const argv[]) { |
| // Create a pipe used for redirecting child process's output. |
| // * pipe_fds[0] is the FD the parent will use for reading. |
| // * pipe_fds[1] is the FD the child will use for writing. |
| int pipe_fds[2]; |
| if (pipe(pipe_fds) == -1) { |
| PLOG(ERROR) << "Failed to create pipe"; |
| return false; |
| } |
| |
| pid_t child_pid = fork(); |
| if (child_pid == -1) { |
| PLOG(ERROR) << "Failed to fork for " << filename; |
| return false; |
| } |
| |
| if (child_pid == 0) { |
| // fork succeeded -- this is executing in the child process |
| |
| // Close the pipe FD not used by this process |
| close(pipe_fds[0]); |
| |
| // Redirect stderr to the pipe FD provided by the parent |
| if (TEMP_FAILURE_RETRY(dup2(pipe_fds[1], STDERR_FILENO)) == -1) { |
| PLOG(ERROR) << "Failed to redirect stderr of " << filename; |
| _exit(127); |
| return false; |
| } |
| close(pipe_fds[1]); |
| |
| if (execv(filename, argv) == -1) { |
| PLOG(ERROR) << "Failed to execve " << filename; |
| return false; |
| } |
| // Unreachable because execve will have succeeded and replaced this code |
| // with child process's code. |
| _exit(127); |
| return false; |
| } else { |
| // fork succeeded -- this is executing in the original/parent process |
| |
| // Close the pipe FD not used by this process |
| close(pipe_fds[1]); |
| |
| // Log the redirected output of the child process. |
| // It's unfortunate that there's no standard way to obtain an istream for a file descriptor. |
| // As a result, we're buffering all output and logging it in one go at the end of the |
| // invocation, instead of logging it as it comes in. |
| const int child_out_fd = pipe_fds[0]; |
| std::string child_output; |
| if (!android::base::ReadFdToString(child_out_fd, &child_output)) { |
| PLOG(ERROR) << "Failed to capture full output of " << filename; |
| } |
| close(child_out_fd); |
| if (!child_output.empty()) { |
| // Log captured output, line by line, because LOG expects to be invoked for each line |
| std::istringstream in(child_output); |
| std::string line; |
| while (std::getline(in, line)) { |
| LOG(ERROR) << filename << ": " << line; |
| } |
| } |
| |
| // Wait for child to terminate |
| int status; |
| if (TEMP_FAILURE_RETRY(waitpid(child_pid, &status, 0)) != child_pid) { |
| PLOG(ERROR) << "Failed to wait for " << filename; |
| return false; |
| } |
| |
| if (WIFEXITED(status)) { |
| int status_code = WEXITSTATUS(status); |
| if (status_code == 0) { |
| return true; |
| } else { |
| LOG(ERROR) << filename << " exited with status " << status_code; |
| } |
| } else if (WIFSIGNALED(status)) { |
| LOG(ERROR) << filename << " killed by signal " << WTERMSIG(status); |
| } else if (WIFSTOPPED(status)) { |
| LOG(ERROR) << filename << " stopped by signal " << WSTOPSIG(status); |
| } else { |
| LOG(ERROR) << "waitpid for " << filename << " returned unexpected status: " << status; |
| } |
| |
| return false; |
| } |
| } |
| |
| bool ReadFirstLine(const char* file, std::string* line) { |
| line->clear(); |
| |
| std::string contents; |
| if (!android::base::ReadFileToString(file, &contents, true /* follow symlinks */)) { |
| return false; |
| } |
| std::istringstream in(contents); |
| std::getline(in, *line); |
| return true; |
| } |
| |
| bool FindPrecompiledSplitPolicy(std::string* file) { |
| file->clear(); |
| // If there is an odm partition, precompiled_sepolicy will be in |
| // odm/etc/selinux. Otherwise it will be in vendor/etc/selinux. |
| static constexpr const char vendor_precompiled_sepolicy[] = |
| "/vendor/etc/selinux/precompiled_sepolicy"; |
| static constexpr const char odm_precompiled_sepolicy[] = |
| "/odm/etc/selinux/precompiled_sepolicy"; |
| if (access(odm_precompiled_sepolicy, R_OK) == 0) { |
| *file = odm_precompiled_sepolicy; |
| } else if (access(vendor_precompiled_sepolicy, R_OK) == 0) { |
| *file = vendor_precompiled_sepolicy; |
| } else { |
| PLOG(INFO) << "No precompiled sepolicy"; |
| return false; |
| } |
| std::string actual_plat_id; |
| if (!ReadFirstLine("/system/etc/selinux/plat_sepolicy_and_mapping.sha256", &actual_plat_id)) { |
| PLOG(INFO) << "Failed to read " |
| "/system/etc/selinux/plat_sepolicy_and_mapping.sha256"; |
| return false; |
| } |
| std::string actual_product_id; |
| if (!ReadFirstLine("/product/etc/selinux/product_sepolicy_and_mapping.sha256", |
| &actual_product_id)) { |
| PLOG(INFO) << "Failed to read " |
| "/product/etc/selinux/product_sepolicy_and_mapping.sha256"; |
| return false; |
| } |
| |
| std::string precompiled_plat_id; |
| std::string precompiled_plat_sha256 = *file + ".plat_sepolicy_and_mapping.sha256"; |
| if (!ReadFirstLine(precompiled_plat_sha256.c_str(), &precompiled_plat_id)) { |
| PLOG(INFO) << "Failed to read " << precompiled_plat_sha256; |
| file->clear(); |
| return false; |
| } |
| std::string precompiled_product_id; |
| std::string precompiled_product_sha256 = *file + ".product_sepolicy_and_mapping.sha256"; |
| if (!ReadFirstLine(precompiled_product_sha256.c_str(), &precompiled_product_id)) { |
| PLOG(INFO) << "Failed to read " << precompiled_product_sha256; |
| file->clear(); |
| return false; |
| } |
| if (actual_plat_id.empty() || actual_plat_id != precompiled_plat_id || |
| actual_product_id.empty() || actual_product_id != precompiled_product_id) { |
| file->clear(); |
| return false; |
| } |
| return true; |
| } |
| |
| bool GetVendorMappingVersion(std::string* plat_vers) { |
| if (!ReadFirstLine("/vendor/etc/selinux/plat_sepolicy_vers.txt", plat_vers)) { |
| PLOG(ERROR) << "Failed to read /vendor/etc/selinux/plat_sepolicy_vers.txt"; |
| return false; |
| } |
| if (plat_vers->empty()) { |
| LOG(ERROR) << "No version present in plat_sepolicy_vers.txt"; |
| return false; |
| } |
| return true; |
| } |
| |
| constexpr const char plat_policy_cil_file[] = "/system/etc/selinux/plat_sepolicy.cil"; |
| constexpr const char userdebug_plat_policy_cil_file[] = |
| "/system/etc/selinux/userdebug_plat_sepolicy.cil"; |
| |
| bool IsSplitPolicyDevice() { |
| return access(plat_policy_cil_file, R_OK) != -1; |
| } |
| |
| bool LoadSplitPolicy() { |
| // IMPLEMENTATION NOTE: Split policy consists of three CIL files: |
| // * platform -- policy needed due to logic contained in the system image, |
| // * non-platform -- policy needed due to logic contained in the vendor image, |
| // * mapping -- mapping policy which helps preserve forward-compatibility of non-platform policy |
| // with newer versions of platform policy. |
| // |
| // secilc is invoked to compile the above three policy files into a single monolithic policy |
| // file. This file is then loaded into the kernel. |
| |
| // See if we need to load userdebug_plat_sepolicy.cil instead of plat_sepolicy.cil. |
| const char* force_debuggable_env = getenv("INIT_FORCE_DEBUGGABLE"); |
| bool use_userdebug_policy = |
| ((force_debuggable_env && "true"s == force_debuggable_env) && |
| AvbHandle::IsDeviceUnlocked() && access(userdebug_plat_policy_cil_file, F_OK) == 0); |
| if (use_userdebug_policy) { |
| LOG(WARNING) << "Using userdebug system sepolicy"; |
| } |
| |
| // Load precompiled policy from vendor image, if a matching policy is found there. The policy |
| // must match the platform policy on the system image. |
| std::string precompiled_sepolicy_file; |
| // use_userdebug_policy requires compiling sepolicy with userdebug_plat_sepolicy.cil. |
| // Thus it cannot use the precompiled policy from vendor image. |
| if (!use_userdebug_policy && FindPrecompiledSplitPolicy(&precompiled_sepolicy_file)) { |
| unique_fd fd(open(precompiled_sepolicy_file.c_str(), O_RDONLY | O_CLOEXEC | O_BINARY)); |
| if (fd != -1) { |
| if (selinux_android_load_policy_from_fd(fd, precompiled_sepolicy_file.c_str()) < 0) { |
| LOG(ERROR) << "Failed to load SELinux policy from " << precompiled_sepolicy_file; |
| return false; |
| } |
| return true; |
| } |
| } |
| // No suitable precompiled policy could be loaded |
| |
| LOG(INFO) << "Compiling SELinux policy"; |
| |
| // We store the output of the compilation on /dev because this is the most convenient tmpfs |
| // storage mount available this early in the boot sequence. |
| char compiled_sepolicy[] = "/dev/sepolicy.XXXXXX"; |
| unique_fd compiled_sepolicy_fd(mkostemp(compiled_sepolicy, O_CLOEXEC)); |
| if (compiled_sepolicy_fd < 0) { |
| PLOG(ERROR) << "Failed to create temporary file " << compiled_sepolicy; |
| return false; |
| } |
| |
| // Determine which mapping file to include |
| std::string vend_plat_vers; |
| if (!GetVendorMappingVersion(&vend_plat_vers)) { |
| return false; |
| } |
| std::string plat_mapping_file("/system/etc/selinux/mapping/" + vend_plat_vers + ".cil"); |
| |
| std::string product_policy_cil_file("/product/etc/selinux/product_sepolicy.cil"); |
| if (access(product_policy_cil_file.c_str(), F_OK) == -1) { |
| product_policy_cil_file.clear(); |
| } |
| |
| std::string product_mapping_file("/product/etc/selinux/mapping/" + vend_plat_vers + ".cil"); |
| if (access(product_mapping_file.c_str(), F_OK) == -1) { |
| product_mapping_file.clear(); |
| } |
| |
| // vendor_sepolicy.cil and plat_pub_versioned.cil are the new design to replace |
| // nonplat_sepolicy.cil. |
| std::string plat_pub_versioned_cil_file("/vendor/etc/selinux/plat_pub_versioned.cil"); |
| std::string vendor_policy_cil_file("/vendor/etc/selinux/vendor_sepolicy.cil"); |
| |
| if (access(vendor_policy_cil_file.c_str(), F_OK) == -1) { |
| // For backward compatibility. |
| // TODO: remove this after no device is using nonplat_sepolicy.cil. |
| vendor_policy_cil_file = "/vendor/etc/selinux/nonplat_sepolicy.cil"; |
| plat_pub_versioned_cil_file.clear(); |
| } else if (access(plat_pub_versioned_cil_file.c_str(), F_OK) == -1) { |
| LOG(ERROR) << "Missing " << plat_pub_versioned_cil_file; |
| return false; |
| } |
| |
| // odm_sepolicy.cil is default but optional. |
| std::string odm_policy_cil_file("/odm/etc/selinux/odm_sepolicy.cil"); |
| if (access(odm_policy_cil_file.c_str(), F_OK) == -1) { |
| odm_policy_cil_file.clear(); |
| } |
| const std::string version_as_string = std::to_string(SEPOLICY_VERSION); |
| |
| // clang-format off |
| std::vector<const char*> compile_args { |
| "/system/bin/secilc", |
| use_userdebug_policy ? userdebug_plat_policy_cil_file : plat_policy_cil_file, |
| "-m", "-M", "true", "-G", "-N", |
| "-c", version_as_string.c_str(), |
| plat_mapping_file.c_str(), |
| "-o", compiled_sepolicy, |
| // We don't care about file_contexts output by the compiler |
| "-f", "/sys/fs/selinux/null", // /dev/null is not yet available |
| }; |
| // clang-format on |
| |
| if (!product_policy_cil_file.empty()) { |
| compile_args.push_back(product_policy_cil_file.c_str()); |
| } |
| if (!product_mapping_file.empty()) { |
| compile_args.push_back(product_mapping_file.c_str()); |
| } |
| if (!plat_pub_versioned_cil_file.empty()) { |
| compile_args.push_back(plat_pub_versioned_cil_file.c_str()); |
| } |
| if (!vendor_policy_cil_file.empty()) { |
| compile_args.push_back(vendor_policy_cil_file.c_str()); |
| } |
| if (!odm_policy_cil_file.empty()) { |
| compile_args.push_back(odm_policy_cil_file.c_str()); |
| } |
| compile_args.push_back(nullptr); |
| |
| if (!ForkExecveAndWaitForCompletion(compile_args[0], (char**)compile_args.data())) { |
| unlink(compiled_sepolicy); |
| return false; |
| } |
| unlink(compiled_sepolicy); |
| |
| LOG(INFO) << "Loading compiled SELinux policy"; |
| if (selinux_android_load_policy_from_fd(compiled_sepolicy_fd, compiled_sepolicy) < 0) { |
| LOG(ERROR) << "Failed to load SELinux policy from " << compiled_sepolicy; |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool LoadMonolithicPolicy() { |
| LOG(VERBOSE) << "Loading SELinux policy from monolithic file"; |
| if (selinux_android_load_policy() < 0) { |
| PLOG(ERROR) << "Failed to load monolithic SELinux policy"; |
| return false; |
| } |
| return true; |
| } |
| |
| bool LoadPolicy() { |
| return IsSplitPolicyDevice() ? LoadSplitPolicy() : LoadMonolithicPolicy(); |
| } |
| |
| void SelinuxInitialize() { |
| Timer t; |
| |
| LOG(INFO) << "Loading SELinux policy"; |
| if (!LoadPolicy()) { |
| LOG(FATAL) << "Unable to load SELinux policy"; |
| } |
| |
| bool kernel_enforcing = (security_getenforce() == 1); |
| bool is_enforcing = IsEnforcing(); |
| if (kernel_enforcing != is_enforcing) { |
| if (security_setenforce(is_enforcing)) { |
| PLOG(FATAL) << "security_setenforce(%s) failed" << (is_enforcing ? "true" : "false"); |
| } |
| } |
| |
| if (auto result = WriteFile("/sys/fs/selinux/checkreqprot", "0"); !result) { |
| LOG(FATAL) << "Unable to write to /sys/fs/selinux/checkreqprot: " << result.error(); |
| } |
| |
| // init's first stage can't set properties, so pass the time to the second stage. |
| setenv("INIT_SELINUX_TOOK", std::to_string(t.duration().count()).c_str(), 1); |
| } |
| |
| } // namespace |
| |
| // The files and directories that were created before initial sepolicy load or |
| // files on ramdisk need to have their security context restored to the proper |
| // value. This must happen before /dev is populated by ueventd. |
| void SelinuxRestoreContext() { |
| LOG(INFO) << "Running restorecon..."; |
| selinux_android_restorecon("/dev", 0); |
| selinux_android_restorecon("/dev/kmsg", 0); |
| if constexpr (WORLD_WRITABLE_KMSG) { |
| selinux_android_restorecon("/dev/kmsg_debug", 0); |
| } |
| selinux_android_restorecon("/dev/null", 0); |
| selinux_android_restorecon("/dev/ptmx", 0); |
| selinux_android_restorecon("/dev/socket", 0); |
| selinux_android_restorecon("/dev/random", 0); |
| selinux_android_restorecon("/dev/urandom", 0); |
| selinux_android_restorecon("/dev/__properties__", 0); |
| |
| selinux_android_restorecon("/dev/block", SELINUX_ANDROID_RESTORECON_RECURSE); |
| selinux_android_restorecon("/dev/device-mapper", 0); |
| |
| selinux_android_restorecon("/apex", 0); |
| } |
| |
| int SelinuxKlogCallback(int type, const char* fmt, ...) { |
| android::base::LogSeverity severity = android::base::ERROR; |
| if (type == SELINUX_WARNING) { |
| severity = android::base::WARNING; |
| } else if (type == SELINUX_INFO) { |
| severity = android::base::INFO; |
| } |
| char buf[1024]; |
| va_list ap; |
| va_start(ap, fmt); |
| vsnprintf(buf, sizeof(buf), fmt, ap); |
| va_end(ap); |
| android::base::KernelLogger(android::base::MAIN, severity, "selinux", nullptr, 0, buf); |
| return 0; |
| } |
| |
| // This function sets up SELinux logging to be written to kmsg, to match init's logging. |
| void SelinuxSetupKernelLogging() { |
| selinux_callback cb; |
| cb.func_log = SelinuxKlogCallback; |
| selinux_set_callback(SELINUX_CB_LOG, cb); |
| } |
| |
| // This function returns the Android version with which the vendor SEPolicy was compiled. |
| // It is used for version checks such as whether or not vendor_init should be used |
| int SelinuxGetVendorAndroidVersion() { |
| if (!IsSplitPolicyDevice()) { |
| // If this device does not split sepolicy files, it's not a Treble device and therefore, |
| // we assume it's always on the latest platform. |
| return __ANDROID_API_FUTURE__; |
| } |
| |
| std::string version; |
| if (!GetVendorMappingVersion(&version)) { |
| LOG(FATAL) << "Could not read vendor SELinux version"; |
| } |
| |
| int major_version; |
| std::string major_version_str(version, 0, version.find('.')); |
| if (!ParseInt(major_version_str, &major_version)) { |
| PLOG(FATAL) << "Failed to parse the vendor sepolicy major version " << major_version_str; |
| } |
| |
| return major_version; |
| } |
| |
| // This function initializes SELinux then execs init to run in the init SELinux context. |
| int SetupSelinux(char** argv) { |
| android::base::InitLogging(argv, &android::base::KernelLogger, [](const char*) { |
| RebootSystem(ANDROID_RB_RESTART2, "bootloader"); |
| }); |
| |
| if (REBOOT_BOOTLOADER_ON_PANIC) { |
| InstallRebootSignalHandlers(); |
| } |
| |
| // Set up SELinux, loading the SELinux policy. |
| SelinuxSetupKernelLogging(); |
| SelinuxInitialize(); |
| |
| // We're in the kernel domain and want to transition to the init domain. File systems that |
| // store SELabels in their xattrs, such as ext4 do not need an explicit restorecon here, |
| // but other file systems do. In particular, this is needed for ramdisks such as the |
| // recovery image for A/B devices. |
| if (selinux_android_restorecon("/system/bin/init", 0) == -1) { |
| PLOG(FATAL) << "restorecon failed of /system/bin/init failed"; |
| } |
| |
| const char* path = "/system/bin/init"; |
| const char* args[] = {path, "second_stage", nullptr}; |
| execv(path, const_cast<char**>(args)); |
| |
| // execv() only returns if an error happened, in which case we |
| // panic and never return from this function. |
| PLOG(FATAL) << "execv(\"" << path << "\") failed"; |
| |
| return 1; |
| } |
| |
| // selinux_android_file_context_handle() takes on the order of 10+ms to run, so we want to cache |
| // its value. selinux_android_restorecon() also needs an sehandle for file context look up. It |
| // will create and store its own copy, but selinux_android_set_sehandle() can be used to provide |
| // one, thus eliminating an extra call to selinux_android_file_context_handle(). |
| void SelabelInitialize() { |
| sehandle = selinux_android_file_context_handle(); |
| selinux_android_set_sehandle(sehandle); |
| } |
| |
| // A C++ wrapper around selabel_lookup() using the cached sehandle. |
| // If sehandle is null, this returns success with an empty context. |
| bool SelabelLookupFileContext(const std::string& key, int type, std::string* result) { |
| result->clear(); |
| |
| if (!sehandle) return true; |
| |
| char* context; |
| if (selabel_lookup(sehandle, &context, key.c_str(), type) != 0) { |
| return false; |
| } |
| *result = context; |
| free(context); |
| return true; |
| } |
| |
| // A C++ wrapper around selabel_lookup_best_match() using the cached sehandle. |
| // If sehandle is null, this returns success with an empty context. |
| bool SelabelLookupFileContextBestMatch(const std::string& key, |
| const std::vector<std::string>& aliases, int type, |
| std::string* result) { |
| result->clear(); |
| |
| if (!sehandle) return true; |
| |
| std::vector<const char*> c_aliases; |
| for (const auto& alias : aliases) { |
| c_aliases.emplace_back(alias.c_str()); |
| } |
| c_aliases.emplace_back(nullptr); |
| |
| char* context; |
| if (selabel_lookup_best_match(sehandle, &context, key.c_str(), &c_aliases[0], type) != 0) { |
| return false; |
| } |
| *result = context; |
| free(context); |
| return true; |
| } |
| |
| } // namespace init |
| } // namespace android |
