| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define TRACE_TAG SERVICES |
| |
| #include "sysdeps.h" |
| |
| #include <errno.h> |
| #include <stddef.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #include <thread> |
| |
| #include <android-base/stringprintf.h> |
| #include <android-base/strings.h> |
| #include <cutils/sockets.h> |
| |
| #include "adb.h" |
| #include "adb_io.h" |
| #include "adb_unique_fd.h" |
| #include "adb_utils.h" |
| #include "services.h" |
| #include "socket_spec.h" |
| #include "sysdeps.h" |
| #include "transport.h" |
| |
| namespace { |
| |
| void service_bootstrap_func(std::string service_name, std::function<void(unique_fd)> func, |
| unique_fd fd) { |
| adb_thread_setname(android::base::StringPrintf("%s svc %d", service_name.c_str(), fd.get())); |
| func(std::move(fd)); |
| } |
| |
| } // namespace |
| |
| unique_fd create_service_thread(const char* service_name, std::function<void(unique_fd)> func) { |
| int s[2]; |
| if (adb_socketpair(s)) { |
| printf("cannot create service socket pair\n"); |
| return unique_fd(); |
| } |
| D("socketpair: (%d,%d)", s[0], s[1]); |
| |
| #if !ADB_HOST |
| if (strcmp(service_name, "sync") == 0) { |
| // Set file sync service socket to maximum size |
| int max_buf = LINUX_MAX_SOCKET_SIZE; |
| adb_setsockopt(s[0], SOL_SOCKET, SO_SNDBUF, &max_buf, sizeof(max_buf)); |
| adb_setsockopt(s[1], SOL_SOCKET, SO_SNDBUF, &max_buf, sizeof(max_buf)); |
| } |
| #endif // !ADB_HOST |
| |
| std::thread(service_bootstrap_func, service_name, func, unique_fd(s[1])).detach(); |
| |
| D("service thread started, %d:%d", s[0], s[1]); |
| return unique_fd(s[0]); |
| } |
| |
| unique_fd service_to_fd(std::string_view name, atransport* transport) { |
| unique_fd ret; |
| |
| if (is_socket_spec(name)) { |
| std::string error; |
| if (!socket_spec_connect(&ret, name, nullptr, nullptr, &error)) { |
| LOG(ERROR) << "failed to connect to socket '" << name << "': " << error; |
| } |
| } else { |
| #if !ADB_HOST |
| ret = daemon_service_to_fd(name, transport); |
| #endif |
| } |
| |
| if (ret >= 0) { |
| close_on_exec(ret.get()); |
| } |
| return ret; |
| } |
| |
| #if ADB_HOST |
| struct state_info { |
| TransportType transport_type; |
| std::string serial; |
| TransportId transport_id; |
| ConnectionState state; |
| }; |
| |
| static void wait_for_state(int fd, state_info* sinfo) { |
| D("wait_for_state %d", sinfo->state); |
| |
| while (true) { |
| bool is_ambiguous = false; |
| std::string error = "unknown error"; |
| const char* serial = sinfo->serial.length() ? sinfo->serial.c_str() : nullptr; |
| atransport* t = acquire_one_transport(sinfo->transport_type, serial, sinfo->transport_id, |
| &is_ambiguous, &error); |
| if (sinfo->state == kCsOffline) { |
| // wait-for-disconnect uses kCsOffline, we don't actually want to wait for 'offline'. |
| if (t == nullptr) { |
| SendOkay(fd); |
| break; |
| } |
| } else if (t != nullptr && |
| (sinfo->state == kCsAny || sinfo->state == t->GetConnectionState())) { |
| SendOkay(fd); |
| break; |
| } |
| |
| if (!is_ambiguous) { |
| adb_pollfd pfd = {.fd = fd, .events = POLLIN}; |
| int rc = adb_poll(&pfd, 1, 100); |
| if (rc < 0) { |
| SendFail(fd, error); |
| break; |
| } else if (rc > 0 && (pfd.revents & POLLHUP) != 0) { |
| // The other end of the socket is closed, probably because the other side was |
| // terminated, bail out. |
| break; |
| } |
| |
| // Try again... |
| } else { |
| SendFail(fd, error); |
| break; |
| } |
| } |
| |
| adb_close(fd); |
| D("wait_for_state is done"); |
| } |
| |
| void connect_emulator(const std::string& port_spec, std::string* response) { |
| std::vector<std::string> pieces = android::base::Split(port_spec, ","); |
| if (pieces.size() != 2) { |
| *response = android::base::StringPrintf("unable to parse '%s' as <console port>,<adb port>", |
| port_spec.c_str()); |
| return; |
| } |
| |
| int console_port = strtol(pieces[0].c_str(), nullptr, 0); |
| int adb_port = strtol(pieces[1].c_str(), nullptr, 0); |
| if (console_port <= 0 || adb_port <= 0) { |
| *response = android::base::StringPrintf("Invalid port numbers: %s", port_spec.c_str()); |
| return; |
| } |
| |
| // Check if the emulator is already known. |
| // Note: There's a small but harmless race condition here: An emulator not |
| // present just yet could be registered by another invocation right |
| // after doing this check here. However, local_connect protects |
| // against double-registration too. From here, a better error message |
| // can be produced. In the case of the race condition, the very specific |
| // error message won't be shown, but the data doesn't get corrupted. |
| atransport* known_emulator = find_emulator_transport_by_adb_port(adb_port); |
| if (known_emulator != nullptr) { |
| *response = android::base::StringPrintf("Emulator already registered on port %d", adb_port); |
| return; |
| } |
| |
| // Preconditions met, try to connect to the emulator. |
| std::string error; |
| if (!local_connect_arbitrary_ports(console_port, adb_port, &error)) { |
| *response = android::base::StringPrintf("Connected to emulator on ports %d,%d", |
| console_port, adb_port); |
| } else { |
| *response = android::base::StringPrintf("Could not connect to emulator on ports %d,%d: %s", |
| console_port, adb_port, error.c_str()); |
| } |
| } |
| |
| static void connect_service(unique_fd fd, std::string host) { |
| std::string response; |
| if (!strncmp(host.c_str(), "emu:", 4)) { |
| connect_emulator(host.c_str() + 4, &response); |
| } else { |
| connect_device(host, &response); |
| } |
| |
| // Send response for emulator and device |
| SendProtocolString(fd.get(), response); |
| } |
| #endif |
| |
| #if ADB_HOST |
| asocket* host_service_to_socket(std::string_view name, std::string_view serial, |
| TransportId transport_id) { |
| if (name == "track-devices") { |
| return create_device_tracker(false); |
| } else if (name == "track-devices-l") { |
| return create_device_tracker(true); |
| } else if (ConsumePrefix(&name, "wait-for-")) { |
| std::shared_ptr<state_info> sinfo = std::make_shared<state_info>(); |
| if (sinfo == nullptr) { |
| fprintf(stderr, "couldn't allocate state_info: %s", strerror(errno)); |
| return nullptr; |
| } |
| |
| sinfo->serial = serial; |
| sinfo->transport_id = transport_id; |
| |
| if (ConsumePrefix(&name, "local")) { |
| sinfo->transport_type = kTransportLocal; |
| } else if (ConsumePrefix(&name, "usb")) { |
| sinfo->transport_type = kTransportUsb; |
| } else if (ConsumePrefix(&name, "any")) { |
| sinfo->transport_type = kTransportAny; |
| } else { |
| return nullptr; |
| } |
| |
| if (name == "-device") { |
| sinfo->state = kCsDevice; |
| } else if (name == "-recovery") { |
| sinfo->state = kCsRecovery; |
| } else if (name == "-sideload") { |
| sinfo->state = kCsSideload; |
| } else if (name == "-bootloader") { |
| sinfo->state = kCsBootloader; |
| } else if (name == "-any") { |
| sinfo->state = kCsAny; |
| } else if (name == "-disconnect") { |
| sinfo->state = kCsOffline; |
| } else { |
| return nullptr; |
| } |
| |
| unique_fd fd = create_service_thread("wait", [sinfo](int fd) { |
| wait_for_state(fd, sinfo.get()); |
| }); |
| return create_local_socket(std::move(fd)); |
| } else if (ConsumePrefix(&name, "connect:")) { |
| std::string host(name); |
| unique_fd fd = create_service_thread( |
| "connect", std::bind(connect_service, std::placeholders::_1, host)); |
| return create_local_socket(std::move(fd)); |
| } |
| return nullptr; |
| } |
| #endif /* ADB_HOST */ |