| /* | |
| * Copyright (C) 2017 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #include "reboot.h" | |
| #include <dirent.h> | |
| #include <fcntl.h> | |
| #include <linux/fs.h> | |
| #include <mntent.h> | |
| #include <linux/loop.h> | |
| #include <sys/cdefs.h> | |
| #include <sys/ioctl.h> | |
| #include <sys/mount.h> | |
| #include <sys/swap.h> | |
| #include <sys/stat.h> | |
| #include <sys/syscall.h> | |
| #include <sys/types.h> | |
| #include <sys/wait.h> | |
| #include <memory> | |
| #include <set> | |
| #include <thread> | |
| #include <vector> | |
| #include <android-base/chrono_utils.h> | |
| #include <android-base/file.h> | |
| #include <android-base/logging.h> | |
| #include <android-base/macros.h> | |
| #include <android-base/properties.h> | |
| #include <android-base/stringprintf.h> | |
| #include <android-base/strings.h> | |
| #include <android-base/unique_fd.h> | |
| #include <bootloader_message/bootloader_message.h> | |
| #include <cutils/android_reboot.h> | |
| #include <fs_mgr.h> | |
| #include <logwrap/logwrap.h> | |
| #include <private/android_filesystem_config.h> | |
| #include <selinux/selinux.h> | |
| #include "action_manager.h" | |
| #include "init.h" | |
| #include "property_service.h" | |
| #include "reboot_utils.h" | |
| #include "service.h" | |
| #include "sigchld_handler.h" | |
| using android::base::GetBoolProperty; | |
| using android::base::Split; | |
| using android::base::StringPrintf; | |
| using android::base::Timer; | |
| using android::base::unique_fd; | |
| namespace android { | |
| namespace init { | |
| // represents umount status during reboot / shutdown. | |
| enum UmountStat { | |
| /* umount succeeded. */ | |
| UMOUNT_STAT_SUCCESS = 0, | |
| /* umount was not run. */ | |
| UMOUNT_STAT_SKIPPED = 1, | |
| /* umount failed with timeout. */ | |
| UMOUNT_STAT_TIMEOUT = 2, | |
| /* could not run due to error */ | |
| UMOUNT_STAT_ERROR = 3, | |
| /* not used by init but reserved for other part to use this to represent the | |
| the state where umount status before reboot is not found / available. */ | |
| UMOUNT_STAT_NOT_AVAILABLE = 4, | |
| }; | |
| // Utility for struct mntent | |
| class MountEntry { | |
| public: | |
| explicit MountEntry(const mntent& entry) | |
| : mnt_fsname_(entry.mnt_fsname), | |
| mnt_dir_(entry.mnt_dir), | |
| mnt_type_(entry.mnt_type), | |
| mnt_opts_(entry.mnt_opts) {} | |
| bool Umount(bool force) { | |
| LOG(INFO) << "Unmounting " << mnt_fsname_ << ":" << mnt_dir_ << " opts " << mnt_opts_; | |
| int r = umount2(mnt_dir_.c_str(), force ? MNT_FORCE : 0); | |
| if (r == 0) { | |
| LOG(INFO) << "Umounted " << mnt_fsname_ << ":" << mnt_dir_ << " opts " << mnt_opts_; | |
| return true; | |
| } else { | |
| PLOG(WARNING) << "Cannot umount " << mnt_fsname_ << ":" << mnt_dir_ << " opts " | |
| << mnt_opts_; | |
| return false; | |
| } | |
| } | |
| void DoFsck() { | |
| int st; | |
| if (IsF2Fs()) { | |
| const char* f2fs_argv[] = { | |
| "/system/bin/fsck.f2fs", | |
| "-a", | |
| mnt_fsname_.c_str(), | |
| }; | |
| android_fork_execvp_ext(arraysize(f2fs_argv), (char**)f2fs_argv, &st, true, LOG_KLOG, | |
| true, nullptr, nullptr, 0); | |
| } else if (IsExt4()) { | |
| const char* ext4_argv[] = { | |
| "/system/bin/e2fsck", | |
| "-y", | |
| mnt_fsname_.c_str(), | |
| }; | |
| android_fork_execvp_ext(arraysize(ext4_argv), (char**)ext4_argv, &st, true, LOG_KLOG, | |
| true, nullptr, nullptr, 0); | |
| } | |
| } | |
| static bool IsBlockDevice(const struct mntent& mntent) { | |
| return android::base::StartsWith(mntent.mnt_fsname, "/dev/block"); | |
| } | |
| static bool IsEmulatedDevice(const struct mntent& mntent) { | |
| return android::base::StartsWith(mntent.mnt_fsname, "/data/"); | |
| } | |
| private: | |
| bool IsF2Fs() const { return mnt_type_ == "f2fs"; } | |
| bool IsExt4() const { return mnt_type_ == "ext4"; } | |
| std::string mnt_fsname_; | |
| std::string mnt_dir_; | |
| std::string mnt_type_; | |
| std::string mnt_opts_; | |
| }; | |
| // Turn off backlight while we are performing power down cleanup activities. | |
| static void TurnOffBacklight() { | |
| Service* service = ServiceList::GetInstance().FindService("blank_screen"); | |
| if (service == nullptr) { | |
| LOG(WARNING) << "cannot find blank_screen in TurnOffBacklight"; | |
| return; | |
| } | |
| if (auto result = service->Start(); !result) { | |
| LOG(WARNING) << "Could not start blank_screen service: " << result.error(); | |
| } | |
| } | |
| static void ShutdownVold() { | |
| const char* vdc_argv[] = {"/system/bin/vdc", "volume", "shutdown"}; | |
| int status; | |
| android_fork_execvp_ext(arraysize(vdc_argv), (char**)vdc_argv, &status, true, LOG_KLOG, true, | |
| nullptr, nullptr, 0); | |
| } | |
| static void LogShutdownTime(UmountStat stat, Timer* t) { | |
| LOG(WARNING) << "powerctl_shutdown_time_ms:" << std::to_string(t->duration().count()) << ":" | |
| << stat; | |
| } | |
| /* Find all read+write block devices and emulated devices in /proc/mounts | |
| * and add them to correpsponding list. | |
| */ | |
| static bool FindPartitionsToUmount(std::vector<MountEntry>* blockDevPartitions, | |
| std::vector<MountEntry>* emulatedPartitions, bool dump) { | |
| std::unique_ptr<std::FILE, int (*)(std::FILE*)> fp(setmntent("/proc/mounts", "re"), endmntent); | |
| if (fp == nullptr) { | |
| PLOG(ERROR) << "Failed to open /proc/mounts"; | |
| return false; | |
| } | |
| mntent* mentry; | |
| while ((mentry = getmntent(fp.get())) != nullptr) { | |
| if (dump) { | |
| LOG(INFO) << "mount entry " << mentry->mnt_fsname << ":" << mentry->mnt_dir << " opts " | |
| << mentry->mnt_opts << " type " << mentry->mnt_type; | |
| } else if (MountEntry::IsBlockDevice(*mentry) && hasmntopt(mentry, "rw")) { | |
| std::string mount_dir(mentry->mnt_dir); | |
| // These are R/O partitions changed to R/W after adb remount. | |
| // Do not umount them as shutdown critical services may rely on them. | |
| if (mount_dir != "/" && mount_dir != "/system" && mount_dir != "/vendor" && | |
| mount_dir != "/oem") { | |
| blockDevPartitions->emplace(blockDevPartitions->begin(), *mentry); | |
| } | |
| } else if (MountEntry::IsEmulatedDevice(*mentry)) { | |
| emulatedPartitions->emplace(emulatedPartitions->begin(), *mentry); | |
| } | |
| } | |
| return true; | |
| } | |
| static void DumpUmountDebuggingInfo() { | |
| int status; | |
| if (!security_getenforce()) { | |
| LOG(INFO) << "Run lsof"; | |
| const char* lsof_argv[] = {"/system/bin/lsof"}; | |
| android_fork_execvp_ext(arraysize(lsof_argv), (char**)lsof_argv, &status, true, LOG_KLOG, | |
| true, nullptr, nullptr, 0); | |
| } | |
| FindPartitionsToUmount(nullptr, nullptr, true); | |
| // dump current CPU stack traces and uninterruptible tasks | |
| android::base::WriteStringToFile("l", "/proc/sysrq-trigger"); | |
| android::base::WriteStringToFile("w", "/proc/sysrq-trigger"); | |
| } | |
| static UmountStat UmountPartitions(std::chrono::milliseconds timeout) { | |
| Timer t; | |
| /* data partition needs all pending writes to be completed and all emulated partitions | |
| * umounted.If the current waiting is not good enough, give | |
| * up and leave it to e2fsck after reboot to fix it. | |
| */ | |
| while (true) { | |
| std::vector<MountEntry> block_devices; | |
| std::vector<MountEntry> emulated_devices; | |
| if (!FindPartitionsToUmount(&block_devices, &emulated_devices, false)) { | |
| return UMOUNT_STAT_ERROR; | |
| } | |
| if (block_devices.size() == 0) { | |
| return UMOUNT_STAT_SUCCESS; | |
| } | |
| bool unmount_done = true; | |
| if (emulated_devices.size() > 0) { | |
| for (auto& entry : emulated_devices) { | |
| if (!entry.Umount(false)) unmount_done = false; | |
| } | |
| if (unmount_done) { | |
| sync(); | |
| } | |
| } | |
| for (auto& entry : block_devices) { | |
| if (!entry.Umount(timeout == 0ms)) unmount_done = false; | |
| } | |
| if (unmount_done) { | |
| return UMOUNT_STAT_SUCCESS; | |
| } | |
| if ((timeout < t.duration())) { // try umount at least once | |
| return UMOUNT_STAT_TIMEOUT; | |
| } | |
| std::this_thread::sleep_for(100ms); | |
| } | |
| } | |
| static void KillAllProcesses() { android::base::WriteStringToFile("i", "/proc/sysrq-trigger"); } | |
| /* Try umounting all emulated file systems R/W block device cfile systems. | |
| * This will just try umount and give it up if it fails. | |
| * For fs like ext4, this is ok as file system will be marked as unclean shutdown | |
| * and necessary check can be done at the next reboot. | |
| * For safer shutdown, caller needs to make sure that | |
| * all processes / emulated partition for the target fs are all cleaned-up. | |
| * | |
| * return true when umount was successful. false when timed out. | |
| */ | |
| static UmountStat TryUmountAndFsck(bool runFsck, std::chrono::milliseconds timeout) { | |
| Timer t; | |
| std::vector<MountEntry> block_devices; | |
| std::vector<MountEntry> emulated_devices; | |
| if (runFsck && !FindPartitionsToUmount(&block_devices, &emulated_devices, false)) { | |
| return UMOUNT_STAT_ERROR; | |
| } | |
| UmountStat stat = UmountPartitions(timeout - t.duration()); | |
| if (stat != UMOUNT_STAT_SUCCESS) { | |
| LOG(INFO) << "umount timeout, last resort, kill all and try"; | |
| if (DUMP_ON_UMOUNT_FAILURE) DumpUmountDebuggingInfo(); | |
| KillAllProcesses(); | |
| // even if it succeeds, still it is timeout and do not run fsck with all processes killed | |
| UmountStat st = UmountPartitions(0ms); | |
| if ((st != UMOUNT_STAT_SUCCESS) && DUMP_ON_UMOUNT_FAILURE) DumpUmountDebuggingInfo(); | |
| } | |
| if (stat == UMOUNT_STAT_SUCCESS && runFsck) { | |
| // fsck part is excluded from timeout check. It only runs for user initiated shutdown | |
| // and should not affect reboot time. | |
| for (auto& entry : block_devices) { | |
| entry.DoFsck(); | |
| } | |
| } | |
| return stat; | |
| } | |
| // zram is able to use backing device on top of a loopback device. | |
| // In order to unmount /data successfully, we have to kill the loopback device first | |
| #define ZRAM_DEVICE "/dev/block/zram0" | |
| #define ZRAM_RESET "/sys/block/zram0/reset" | |
| #define ZRAM_BACK_DEV "/sys/block/zram0/backing_dev" | |
| static void KillZramBackingDevice() { | |
| std::string backing_dev; | |
| if (!android::base::ReadFileToString(ZRAM_BACK_DEV, &backing_dev)) return; | |
| if (!android::base::StartsWith(backing_dev, "/dev/block/loop")) return; | |
| // cut the last "\n" | |
| backing_dev.erase(backing_dev.length() - 1); | |
| // shutdown zram handle | |
| Timer swap_timer; | |
| LOG(INFO) << "swapoff() start..."; | |
| if (swapoff(ZRAM_DEVICE) == -1) { | |
| LOG(ERROR) << "zram_backing_dev: swapoff (" << backing_dev << ")" << " failed"; | |
| return; | |
| } | |
| LOG(INFO) << "swapoff() took " << swap_timer;; | |
| if (!android::base::WriteStringToFile("1", ZRAM_RESET)) { | |
| LOG(ERROR) << "zram_backing_dev: reset (" << backing_dev << ")" << " failed"; | |
| return; | |
| } | |
| // clear loopback device | |
| unique_fd loop(TEMP_FAILURE_RETRY(open(backing_dev.c_str(), O_RDWR | O_CLOEXEC))); | |
| if (loop.get() < 0) { | |
| LOG(ERROR) << "zram_backing_dev: open(" << backing_dev << ")" << " failed"; | |
| return; | |
| } | |
| if (ioctl(loop.get(), LOOP_CLR_FD, 0) < 0) { | |
| LOG(ERROR) << "zram_backing_dev: loop_clear (" << backing_dev << ")" << " failed"; | |
| return; | |
| } | |
| LOG(INFO) << "zram_backing_dev: `" << backing_dev << "` is cleared successfully."; | |
| } | |
| //* Reboot / shutdown the system. | |
| // cmd ANDROID_RB_* as defined in android_reboot.h | |
| // reason Reason string like "reboot", "shutdown,userrequested" | |
| // rebootTarget Reboot target string like "bootloader". Otherwise, it should be an | |
| // empty string. | |
| // runFsck Whether to run fsck after umount is done. | |
| // | |
| static void DoReboot(unsigned int cmd, const std::string& reason, const std::string& rebootTarget, | |
| bool runFsck) { | |
| Timer t; | |
| LOG(INFO) << "Reboot start, reason: " << reason << ", rebootTarget: " << rebootTarget; | |
| // Ensure last reboot reason is reduced to canonical | |
| // alias reported in bootloader or system boot reason. | |
| size_t skip = 0; | |
| std::vector<std::string> reasons = Split(reason, ","); | |
| if (reasons.size() >= 2 && reasons[0] == "reboot" && | |
| (reasons[1] == "recovery" || reasons[1] == "bootloader" || reasons[1] == "cold" || | |
| reasons[1] == "hard" || reasons[1] == "warm")) { | |
| skip = strlen("reboot,"); | |
| } | |
| property_set(LAST_REBOOT_REASON_PROPERTY, reason.c_str() + skip); | |
| sync(); | |
| bool is_thermal_shutdown = cmd == ANDROID_RB_THERMOFF; | |
| auto shutdown_timeout = 0ms; | |
| if (!SHUTDOWN_ZERO_TIMEOUT) { | |
| constexpr unsigned int shutdown_timeout_default = 6; | |
| constexpr unsigned int max_thermal_shutdown_timeout = 3; | |
| auto shutdown_timeout_final = android::base::GetUintProperty("ro.build.shutdown_timeout", | |
| shutdown_timeout_default); | |
| if (is_thermal_shutdown && shutdown_timeout_final > max_thermal_shutdown_timeout) { | |
| shutdown_timeout_final = max_thermal_shutdown_timeout; | |
| } | |
| shutdown_timeout = std::chrono::seconds(shutdown_timeout_final); | |
| } | |
| LOG(INFO) << "Shutdown timeout: " << shutdown_timeout.count() << " ms"; | |
| // keep debugging tools until non critical ones are all gone. | |
| const std::set<std::string> kill_after_apps{"tombstoned", "logd", "adbd"}; | |
| // watchdogd is a vendor specific component but should be alive to complete shutdown safely. | |
| const std::set<std::string> to_starts{"watchdogd"}; | |
| for (const auto& s : ServiceList::GetInstance()) { | |
| if (kill_after_apps.count(s->name())) { | |
| s->SetShutdownCritical(); | |
| } else if (to_starts.count(s->name())) { | |
| if (auto result = s->Start(); !result) { | |
| LOG(ERROR) << "Could not start shutdown 'to_start' service '" << s->name() | |
| << "': " << result.error(); | |
| } | |
| s->SetShutdownCritical(); | |
| } else if (s->IsShutdownCritical()) { | |
| // Start shutdown critical service if not started. | |
| if (auto result = s->Start(); !result) { | |
| LOG(ERROR) << "Could not start shutdown critical service '" << s->name() | |
| << "': " << result.error(); | |
| } | |
| } | |
| } | |
| // remaining operations (specifically fsck) may take a substantial duration | |
| if (cmd == ANDROID_RB_POWEROFF || is_thermal_shutdown) { | |
| TurnOffBacklight(); | |
| } | |
| Service* bootAnim = ServiceList::GetInstance().FindService("bootanim"); | |
| Service* surfaceFlinger = ServiceList::GetInstance().FindService("surfaceflinger"); | |
| if (bootAnim != nullptr && surfaceFlinger != nullptr && surfaceFlinger->IsRunning()) { | |
| bool do_shutdown_animation = GetBoolProperty("ro.init.shutdown_animation", false); | |
| if (do_shutdown_animation) { | |
| property_set("service.bootanim.exit", "0"); | |
| // Could be in the middle of animation. Stop and start so that it can pick | |
| // up the right mode. | |
| bootAnim->Stop(); | |
| } | |
| for (const auto& service : ServiceList::GetInstance()) { | |
| if (service->classnames().count("animation") == 0) { | |
| continue; | |
| } | |
| // start all animation classes if stopped. | |
| if (do_shutdown_animation) { | |
| service->Start().IgnoreError(); | |
| } | |
| service->SetShutdownCritical(); // will not check animation class separately | |
| } | |
| if (do_shutdown_animation) { | |
| bootAnim->Start().IgnoreError(); | |
| surfaceFlinger->SetShutdownCritical(); | |
| bootAnim->SetShutdownCritical(); | |
| } | |
| } | |
| // optional shutdown step | |
| // 1. terminate all services except shutdown critical ones. wait for delay to finish | |
| if (shutdown_timeout > 0ms) { | |
| LOG(INFO) << "terminating init services"; | |
| // Ask all services to terminate except shutdown critical ones. | |
| for (const auto& s : ServiceList::GetInstance().services_in_shutdown_order()) { | |
| if (!s->IsShutdownCritical()) s->Terminate(); | |
| } | |
| int service_count = 0; | |
| // Only wait up to half of timeout here | |
| auto termination_wait_timeout = shutdown_timeout / 2; | |
| while (t.duration() < termination_wait_timeout) { | |
| ReapAnyOutstandingChildren(); | |
| service_count = 0; | |
| for (const auto& s : ServiceList::GetInstance()) { | |
| // Count the number of services running except shutdown critical. | |
| // Exclude the console as it will ignore the SIGTERM signal | |
| // and not exit. | |
| // Note: SVC_CONSOLE actually means "requires console" but | |
| // it is only used by the shell. | |
| if (!s->IsShutdownCritical() && s->pid() != 0 && (s->flags() & SVC_CONSOLE) == 0) { | |
| service_count++; | |
| } | |
| } | |
| if (service_count == 0) { | |
| // All terminable services terminated. We can exit early. | |
| break; | |
| } | |
| // Wait a bit before recounting the number or running services. | |
| std::this_thread::sleep_for(50ms); | |
| } | |
| LOG(INFO) << "Terminating running services took " << t | |
| << " with remaining services:" << service_count; | |
| } | |
| // minimum safety steps before restarting | |
| // 2. kill all services except ones that are necessary for the shutdown sequence. | |
| for (const auto& s : ServiceList::GetInstance().services_in_shutdown_order()) { | |
| if (!s->IsShutdownCritical()) s->Stop(); | |
| } | |
| SubcontextTerminate(); | |
| ReapAnyOutstandingChildren(); | |
| // 3. send volume shutdown to vold | |
| Service* voldService = ServiceList::GetInstance().FindService("vold"); | |
| if (voldService != nullptr && voldService->IsRunning()) { | |
| ShutdownVold(); | |
| voldService->Stop(); | |
| } else { | |
| LOG(INFO) << "vold not running, skipping vold shutdown"; | |
| } | |
| // logcat stopped here | |
| for (const auto& s : ServiceList::GetInstance().services_in_shutdown_order()) { | |
| if (kill_after_apps.count(s->name())) s->Stop(); | |
| } | |
| // 4. sync, try umount, and optionally run fsck for user shutdown | |
| { | |
| Timer sync_timer; | |
| LOG(INFO) << "sync() before umount..."; | |
| sync(); | |
| LOG(INFO) << "sync() before umount took" << sync_timer; | |
| } | |
| // 5. drop caches and disable zram backing device, if exist | |
| KillZramBackingDevice(); | |
| UmountStat stat = TryUmountAndFsck(runFsck, shutdown_timeout - t.duration()); | |
| // Follow what linux shutdown is doing: one more sync with little bit delay | |
| { | |
| Timer sync_timer; | |
| LOG(INFO) << "sync() after umount..."; | |
| sync(); | |
| LOG(INFO) << "sync() after umount took" << sync_timer; | |
| } | |
| if (!is_thermal_shutdown) std::this_thread::sleep_for(100ms); | |
| LogShutdownTime(stat, &t); | |
| // Reboot regardless of umount status. If umount fails, fsck after reboot will fix it. | |
| RebootSystem(cmd, rebootTarget); | |
| abort(); | |
| } | |
| bool HandlePowerctlMessage(const std::string& command) { | |
| unsigned int cmd = 0; | |
| std::vector<std::string> cmd_params = Split(command, ","); | |
| std::string reboot_target = ""; | |
| bool run_fsck = false; | |
| bool command_invalid = false; | |
| if (cmd_params.size() > 3) { | |
| command_invalid = true; | |
| } else if (cmd_params[0] == "shutdown") { | |
| cmd = ANDROID_RB_POWEROFF; | |
| if (cmd_params.size() == 2) { | |
| if (cmd_params[1] == "userrequested") { | |
| // The shutdown reason is PowerManager.SHUTDOWN_USER_REQUESTED. | |
| // Run fsck once the file system is remounted in read-only mode. | |
| run_fsck = true; | |
| } else if (cmd_params[1] == "thermal") { | |
| // Turn off sources of heat immediately. | |
| TurnOffBacklight(); | |
| // run_fsck is false to avoid delay | |
| cmd = ANDROID_RB_THERMOFF; | |
| } | |
| } | |
| } else if (cmd_params[0] == "reboot") { | |
| cmd = ANDROID_RB_RESTART2; | |
| if (cmd_params.size() >= 2) { | |
| reboot_target = cmd_params[1]; | |
| // adb reboot fastboot should boot into bootloader for devices not | |
| // supporting logical partitions. | |
| if (reboot_target == "fastboot" && | |
| !android::base::GetBoolProperty("ro.boot.dynamic_partitions", false)) { | |
| reboot_target = "bootloader"; | |
| } | |
| // When rebooting to the bootloader notify the bootloader writing | |
| // also the BCB. | |
| if (reboot_target == "bootloader") { | |
| std::string err; | |
| if (!write_reboot_bootloader(&err)) { | |
| LOG(ERROR) << "reboot-bootloader: Error writing " | |
| "bootloader_message: " | |
| << err; | |
| } | |
| } else if (reboot_target == "sideload" || reboot_target == "sideload-auto-reboot" || | |
| reboot_target == "fastboot") { | |
| std::string arg = reboot_target == "sideload-auto-reboot" ? "sideload_auto_reboot" | |
| : reboot_target; | |
| const std::vector<std::string> options = { | |
| "--" + arg, | |
| }; | |
| std::string err; | |
| if (!write_bootloader_message(options, &err)) { | |
| LOG(ERROR) << "Failed to set bootloader message: " << err; | |
| return false; | |
| } | |
| reboot_target = "recovery"; | |
| } | |
| // If there is an additional parameter, pass it along | |
| if ((cmd_params.size() == 3) && cmd_params[2].size()) { | |
| reboot_target += "," + cmd_params[2]; | |
| } | |
| } | |
| } else { | |
| command_invalid = true; | |
| } | |
| if (command_invalid) { | |
| LOG(ERROR) << "powerctl: unrecognized command '" << command << "'"; | |
| return false; | |
| } | |
| LOG(INFO) << "Clear action queue and start shutdown trigger"; | |
| ActionManager::GetInstance().ClearQueue(); | |
| // Queue shutdown trigger first | |
| ActionManager::GetInstance().QueueEventTrigger("shutdown"); | |
| // Queue built-in shutdown_done | |
| auto shutdown_handler = [cmd, command, reboot_target, run_fsck](const BuiltinArguments&) { | |
| DoReboot(cmd, command, reboot_target, run_fsck); | |
| return Success(); | |
| }; | |
| ActionManager::GetInstance().QueueBuiltinAction(shutdown_handler, "shutdown_done"); | |
| // Skip wait for prop if it is in progress | |
| ResetWaitForProp(); | |
| // Clear EXEC flag if there is one pending | |
| for (const auto& s : ServiceList::GetInstance()) { | |
| s->UnSetExec(); | |
| } | |
| return true; | |
| } | |
| } // namespace init | |
| } // namespace android |