| /* | |
| * Copyright (C) 2007 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <unistd.h> | |
| #include <string.h> | |
| #include <ctype.h> | |
| #include <fcntl.h> | |
| #include <stdarg.h> | |
| #include <dirent.h> | |
| #include <limits.h> | |
| #include <errno.h> | |
| #include <sys/poll.h> | |
| #include <memory> | |
| #include <cutils/misc.h> | |
| #include <cutils/sockets.h> | |
| #include <cutils/multiuser.h> | |
| #define _REALLY_INCLUDE_SYS__SYSTEM_PROPERTIES_H_ | |
| #include <sys/_system_properties.h> | |
| #include <sys/socket.h> | |
| #include <sys/un.h> | |
| #include <sys/select.h> | |
| #include <sys/types.h> | |
| #include <netinet/in.h> | |
| #include <sys/mman.h> | |
| #include <private/android_filesystem_config.h> | |
| #include <selinux/selinux.h> | |
| #include <selinux/label.h> | |
| #include <fs_mgr.h> | |
| #include <android-base/file.h> | |
| #include "bootimg.h" | |
| #include "property_service.h" | |
| #include "init.h" | |
| #include "util.h" | |
| #include "log.h" | |
| #define PERSISTENT_PROPERTY_DIR "/data/property" | |
| #define FSTAB_PREFIX "/fstab." | |
| #define RECOVERY_MOUNT_POINT "/recovery" | |
| static int persistent_properties_loaded = 0; | |
| static int property_set_fd = -1; | |
| void property_init() { | |
| if (__system_property_area_init()) { | |
| ERROR("Failed to initialize property area\n"); | |
| exit(1); | |
| } | |
| } | |
| static int check_mac_perms(const char *name, char *sctx, struct ucred *cr) | |
| { | |
| char *tctx = NULL; | |
| int result = 0; | |
| property_audit_data audit_data; | |
| if (!sctx) | |
| goto err; | |
| if (!sehandle_prop) | |
| goto err; | |
| if (selabel_lookup(sehandle_prop, &tctx, name, 1) != 0) | |
| goto err; | |
| audit_data.name = name; | |
| audit_data.cr = cr; | |
| if (selinux_check_access(sctx, tctx, "property_service", "set", reinterpret_cast<void*>(&audit_data)) == 0) | |
| result = 1; | |
| freecon(tctx); | |
| err: | |
| return result; | |
| } | |
| static int check_control_mac_perms(const char *name, char *sctx, struct ucred *cr) | |
| { | |
| /* | |
| * Create a name prefix out of ctl.<service name> | |
| * The new prefix allows the use of the existing | |
| * property service backend labeling while avoiding | |
| * mislabels based on true property prefixes. | |
| */ | |
| char ctl_name[PROP_VALUE_MAX+4]; | |
| int ret = snprintf(ctl_name, sizeof(ctl_name), "ctl.%s", name); | |
| if (ret < 0 || (size_t) ret >= sizeof(ctl_name)) | |
| return 0; | |
| return check_mac_perms(ctl_name, sctx, cr); | |
| } | |
| /* | |
| * Checks permissions for setting system properties. | |
| * Returns 1 if uid allowed, 0 otherwise. | |
| */ | |
| static int check_perms(const char *name, char *sctx, struct ucred *cr) | |
| { | |
| if(!strncmp(name, "ro.", 3)) | |
| name +=3; | |
| return check_mac_perms(name, sctx, cr); | |
| } | |
| std::string property_get(const char* name) { | |
| char value[PROP_VALUE_MAX] = {0}; | |
| __system_property_get(name, value); | |
| return value; | |
| } | |
| static void write_persistent_property(const char *name, const char *value) | |
| { | |
| char tempPath[PATH_MAX]; | |
| char path[PATH_MAX]; | |
| int fd; | |
| snprintf(tempPath, sizeof(tempPath), "%s/.temp.XXXXXX", PERSISTENT_PROPERTY_DIR); | |
| fd = mkstemp(tempPath); | |
| if (fd < 0) { | |
| ERROR("Unable to write persistent property to temp file %s: %s\n", tempPath, strerror(errno)); | |
| return; | |
| } | |
| write(fd, value, strlen(value)); | |
| fsync(fd); | |
| close(fd); | |
| snprintf(path, sizeof(path), "%s/%s", PERSISTENT_PROPERTY_DIR, name); | |
| if (rename(tempPath, path)) { | |
| unlink(tempPath); | |
| ERROR("Unable to rename persistent property file %s to %s\n", tempPath, path); | |
| } | |
| } | |
| static bool is_legal_property_name(const char* name, size_t namelen) | |
| { | |
| size_t i; | |
| if (namelen >= PROP_NAME_MAX) return false; | |
| if (namelen < 1) return false; | |
| if (name[0] == '.') return false; | |
| if (name[namelen - 1] == '.') return false; | |
| /* Only allow alphanumeric, plus '.', '-', or '_' */ | |
| /* Don't allow ".." to appear in a property name */ | |
| for (i = 0; i < namelen; i++) { | |
| if (name[i] == '.') { | |
| // i=0 is guaranteed to never have a dot. See above. | |
| if (name[i-1] == '.') return false; | |
| continue; | |
| } | |
| if (name[i] == '_' || name[i] == '-') continue; | |
| if (name[i] >= 'a' && name[i] <= 'z') continue; | |
| if (name[i] >= 'A' && name[i] <= 'Z') continue; | |
| if (name[i] >= '0' && name[i] <= '9') continue; | |
| return false; | |
| } | |
| return true; | |
| } | |
| static int property_set_impl(const char* name, const char* value) { | |
| size_t namelen = strlen(name); | |
| size_t valuelen = strlen(value); | |
| if (!is_legal_property_name(name, namelen)) return -1; | |
| if (valuelen >= PROP_VALUE_MAX) return -1; | |
| if (strcmp("selinux.reload_policy", name) == 0 && strcmp("1", value) == 0) { | |
| if (selinux_reload_policy() != 0) { | |
| ERROR("Failed to reload policy\n"); | |
| } | |
| } else if (strcmp("selinux.restorecon_recursive", name) == 0 && valuelen > 0) { | |
| if (restorecon_recursive(value) != 0) { | |
| ERROR("Failed to restorecon_recursive %s\n", value); | |
| } | |
| } | |
| prop_info* pi = (prop_info*) __system_property_find(name); | |
| if(pi != 0) { | |
| /* ro.* properties may NEVER be modified once set */ | |
| if(!strncmp(name, "ro.", 3)) return -1; | |
| __system_property_update(pi, value, valuelen); | |
| } else { | |
| int rc = __system_property_add(name, namelen, value, valuelen); | |
| if (rc < 0) { | |
| return rc; | |
| } | |
| } | |
| /* If name starts with "net." treat as a DNS property. */ | |
| if (strncmp("net.", name, strlen("net.")) == 0) { | |
| if (strcmp("net.change", name) == 0) { | |
| return 0; | |
| } | |
| /* | |
| * The 'net.change' property is a special property used track when any | |
| * 'net.*' property name is updated. It is _ONLY_ updated here. Its value | |
| * contains the last updated 'net.*' property. | |
| */ | |
| property_set("net.change", name); | |
| } else if (persistent_properties_loaded && | |
| strncmp("persist.", name, strlen("persist.")) == 0) { | |
| /* | |
| * Don't write properties to disk until after we have read all default properties | |
| * to prevent them from being overwritten by default values. | |
| */ | |
| write_persistent_property(name, value); | |
| } | |
| property_changed(name, value); | |
| return 0; | |
| } | |
| int property_set(const char* name, const char* value) { | |
| int rc = property_set_impl(name, value); | |
| if (rc == -1) { | |
| ERROR("property_set(\"%s\", \"%s\") failed\n", name, value); | |
| } | |
| return rc; | |
| } | |
| static void handle_property_set_fd() | |
| { | |
| prop_msg msg; | |
| int s; | |
| int r; | |
| struct ucred cr; | |
| struct sockaddr_un addr; | |
| socklen_t addr_size = sizeof(addr); | |
| socklen_t cr_size = sizeof(cr); | |
| char * source_ctx = NULL; | |
| struct pollfd ufds[1]; | |
| const int timeout_ms = 2 * 1000; /* Default 2 sec timeout for caller to send property. */ | |
| int nr; | |
| if ((s = accept(property_set_fd, (struct sockaddr *) &addr, &addr_size)) < 0) { | |
| return; | |
| } | |
| /* Check socket options here */ | |
| if (getsockopt(s, SOL_SOCKET, SO_PEERCRED, &cr, &cr_size) < 0) { | |
| close(s); | |
| ERROR("Unable to receive socket options\n"); | |
| return; | |
| } | |
| ufds[0].fd = s; | |
| ufds[0].events = POLLIN; | |
| ufds[0].revents = 0; | |
| nr = TEMP_FAILURE_RETRY(poll(ufds, 1, timeout_ms)); | |
| if (nr == 0) { | |
| ERROR("sys_prop: timeout waiting for uid=%d to send property message.\n", cr.uid); | |
| close(s); | |
| return; | |
| } else if (nr < 0) { | |
| ERROR("sys_prop: error waiting for uid=%d to send property message: %s\n", cr.uid, strerror(errno)); | |
| close(s); | |
| return; | |
| } | |
| r = TEMP_FAILURE_RETRY(recv(s, &msg, sizeof(msg), MSG_DONTWAIT)); | |
| if(r != sizeof(prop_msg)) { | |
| ERROR("sys_prop: mis-match msg size received: %d expected: %zu: %s\n", | |
| r, sizeof(prop_msg), strerror(errno)); | |
| close(s); | |
| return; | |
| } | |
| switch(msg.cmd) { | |
| case PROP_MSG_SETPROP: | |
| msg.name[PROP_NAME_MAX-1] = 0; | |
| msg.value[PROP_VALUE_MAX-1] = 0; | |
| if (!is_legal_property_name(msg.name, strlen(msg.name))) { | |
| ERROR("sys_prop: illegal property name. Got: \"%s\"\n", msg.name); | |
| close(s); | |
| return; | |
| } | |
| getpeercon(s, &source_ctx); | |
| if(memcmp(msg.name,"ctl.",4) == 0) { | |
| // Keep the old close-socket-early behavior when handling | |
| // ctl.* properties. | |
| close(s); | |
| if (check_control_mac_perms(msg.value, source_ctx, &cr)) { | |
| handle_control_message((char*) msg.name + 4, (char*) msg.value); | |
| } else { | |
| ERROR("sys_prop: Unable to %s service ctl [%s] uid:%d gid:%d pid:%d\n", | |
| msg.name + 4, msg.value, cr.uid, cr.gid, cr.pid); | |
| } | |
| } else { | |
| if (check_perms(msg.name, source_ctx, &cr)) { | |
| property_set((char*) msg.name, (char*) msg.value); | |
| } else { | |
| ERROR("sys_prop: permission denied uid:%d name:%s\n", | |
| cr.uid, msg.name); | |
| } | |
| // Note: bionic's property client code assumes that the | |
| // property server will not close the socket until *AFTER* | |
| // the property is written to memory. | |
| close(s); | |
| } | |
| freecon(source_ctx); | |
| break; | |
| default: | |
| close(s); | |
| break; | |
| } | |
| } | |
| static void load_properties_from_file(const char *, const char *); | |
| /* | |
| * Filter is used to decide which properties to load: NULL loads all keys, | |
| * "ro.foo.*" is a prefix match, and "ro.foo.bar" is an exact match. | |
| */ | |
| static void load_properties(char *data, const char *filter) | |
| { | |
| char *key, *value, *eol, *sol, *tmp, *fn; | |
| size_t flen = 0; | |
| if (filter) { | |
| flen = strlen(filter); | |
| } | |
| sol = data; | |
| while ((eol = strchr(sol, '\n'))) { | |
| key = sol; | |
| *eol++ = 0; | |
| sol = eol; | |
| while (isspace(*key)) key++; | |
| if (*key == '#') continue; | |
| tmp = eol - 2; | |
| while ((tmp > key) && isspace(*tmp)) *tmp-- = 0; | |
| if (!strncmp(key, "import ", 7) && flen == 0) { | |
| fn = key + 7; | |
| while (isspace(*fn)) fn++; | |
| key = strchr(fn, ' '); | |
| if (key) { | |
| *key++ = 0; | |
| while (isspace(*key)) key++; | |
| } | |
| load_properties_from_file(fn, key); | |
| } else { | |
| value = strchr(key, '='); | |
| if (!value) continue; | |
| *value++ = 0; | |
| tmp = value - 2; | |
| while ((tmp > key) && isspace(*tmp)) *tmp-- = 0; | |
| while (isspace(*value)) value++; | |
| if (flen > 0) { | |
| if (filter[flen - 1] == '*') { | |
| if (strncmp(key, filter, flen - 1)) continue; | |
| } else { | |
| if (strcmp(key, filter)) continue; | |
| } | |
| } | |
| property_set(key, value); | |
| } | |
| } | |
| } | |
| /* | |
| * Filter is used to decide which properties to load: NULL loads all keys, | |
| * "ro.foo.*" is a prefix match, and "ro.foo.bar" is an exact match. | |
| */ | |
| static void load_properties_from_file(const char* filename, const char* filter) { | |
| Timer t; | |
| std::string data; | |
| if (read_file(filename, &data)) { | |
| data.push_back('\n'); | |
| load_properties(&data[0], filter); | |
| } | |
| NOTICE("(Loading properties from %s took %.2fs.)\n", filename, t.duration()); | |
| } | |
| static void load_persistent_properties() { | |
| persistent_properties_loaded = 1; | |
| std::unique_ptr<DIR, int(*)(DIR*)> dir(opendir(PERSISTENT_PROPERTY_DIR), closedir); | |
| if (!dir) { | |
| ERROR("Unable to open persistent property directory \"%s\": %s\n", | |
| PERSISTENT_PROPERTY_DIR, strerror(errno)); | |
| return; | |
| } | |
| struct dirent* entry; | |
| while ((entry = readdir(dir.get())) != NULL) { | |
| if (strncmp("persist.", entry->d_name, strlen("persist."))) { | |
| continue; | |
| } | |
| if (entry->d_type != DT_REG) { | |
| continue; | |
| } | |
| // Open the file and read the property value. | |
| int fd = openat(dirfd(dir.get()), entry->d_name, O_RDONLY | O_NOFOLLOW); | |
| if (fd == -1) { | |
| ERROR("Unable to open persistent property file \"%s\": %s\n", | |
| entry->d_name, strerror(errno)); | |
| continue; | |
| } | |
| struct stat sb; | |
| if (fstat(fd, &sb) == -1) { | |
| ERROR("fstat on property file \"%s\" failed: %s\n", entry->d_name, strerror(errno)); | |
| close(fd); | |
| continue; | |
| } | |
| // File must not be accessible to others, be owned by root/root, and | |
| // not be a hard link to any other file. | |
| if (((sb.st_mode & (S_IRWXG | S_IRWXO)) != 0) || (sb.st_uid != 0) || (sb.st_gid != 0) || | |
| (sb.st_nlink != 1)) { | |
| ERROR("skipping insecure property file %s (uid=%u gid=%u nlink=%u mode=%o)\n", | |
| entry->d_name, (unsigned int)sb.st_uid, (unsigned int)sb.st_gid, | |
| (unsigned int)sb.st_nlink, sb.st_mode); | |
| close(fd); | |
| continue; | |
| } | |
| char value[PROP_VALUE_MAX]; | |
| int length = read(fd, value, sizeof(value) - 1); | |
| if (length >= 0) { | |
| value[length] = 0; | |
| property_set(entry->d_name, value); | |
| } else { | |
| ERROR("Unable to read persistent property file %s: %s\n", | |
| entry->d_name, strerror(errno)); | |
| } | |
| close(fd); | |
| } | |
| } | |
| void property_load_boot_defaults() { | |
| load_properties_from_file(PROP_PATH_RAMDISK_DEFAULT, NULL); | |
| } | |
| static void load_override_properties() { | |
| if (ALLOW_LOCAL_PROP_OVERRIDE) { | |
| std::string debuggable = property_get("ro.debuggable"); | |
| if (debuggable == "1") { | |
| load_properties_from_file(PROP_PATH_LOCAL_OVERRIDE, NULL); | |
| } | |
| } | |
| } | |
| /* When booting an encrypted system, /data is not mounted when the | |
| * property service is started, so any properties stored there are | |
| * not loaded. Vold triggers init to load these properties once it | |
| * has mounted /data. | |
| */ | |
| void load_persist_props(void) { | |
| load_override_properties(); | |
| /* Read persistent properties after all default values have been loaded. */ | |
| load_persistent_properties(); | |
| } | |
| void load_recovery_id_prop() { | |
| std::string ro_hardware = property_get("ro.hardware"); | |
| if (ro_hardware.empty()) { | |
| ERROR("ro.hardware not set - unable to load recovery id\n"); | |
| return; | |
| } | |
| std::string fstab_filename = FSTAB_PREFIX + ro_hardware; | |
| std::unique_ptr<fstab, void(*)(fstab*)> tab(fs_mgr_read_fstab(fstab_filename.c_str()), | |
| fs_mgr_free_fstab); | |
| if (!tab) { | |
| ERROR("unable to read fstab %s: %s\n", fstab_filename.c_str(), strerror(errno)); | |
| return; | |
| } | |
| fstab_rec* rec = fs_mgr_get_entry_for_mount_point(tab.get(), RECOVERY_MOUNT_POINT); | |
| if (rec == NULL) { | |
| ERROR("/recovery not specified in fstab\n"); | |
| return; | |
| } | |
| int fd = open(rec->blk_device, O_RDONLY); | |
| if (fd == -1) { | |
| ERROR("error opening block device %s: %s\n", rec->blk_device, strerror(errno)); | |
| return; | |
| } | |
| boot_img_hdr hdr; | |
| if (android::base::ReadFully(fd, &hdr, sizeof(hdr))) { | |
| std::string hex = bytes_to_hex(reinterpret_cast<uint8_t*>(hdr.id), sizeof(hdr.id)); | |
| property_set("ro.recovery_id", hex.c_str()); | |
| } else { | |
| ERROR("error reading /recovery: %s\n", strerror(errno)); | |
| } | |
| close(fd); | |
| } | |
| void load_system_props() { | |
| load_properties_from_file(PROP_PATH_SYSTEM_BUILD, NULL); | |
| load_properties_from_file(PROP_PATH_VENDOR_BUILD, NULL); | |
| load_properties_from_file(PROP_PATH_FACTORY, "ro.*"); | |
| load_recovery_id_prop(); | |
| } | |
| void start_property_service() { | |
| property_set_fd = create_socket(PROP_SERVICE_NAME, SOCK_STREAM | SOCK_CLOEXEC | SOCK_NONBLOCK, | |
| 0666, 0, 0, NULL); | |
| if (property_set_fd == -1) { | |
| ERROR("start_property_service socket creation failed: %s\n", strerror(errno)); | |
| exit(1); | |
| } | |
| listen(property_set_fd, 8); | |
| register_epoll_handler(property_set_fd, handle_property_set_fd); | |
| } |