| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* |
| * Read-only access to Zip archives, with minimal heap allocation. |
| */ |
| |
| #include <assert.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <inttypes.h> |
| #include <limits.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <unistd.h> |
| |
| #include <memory> |
| #include <vector> |
| |
| #include "android-base/file.h" |
| #include "android-base/macros.h" // TEMP_FAILURE_RETRY may or may not be in unistd |
| #include "android-base/memory.h" |
| #include "log/log.h" |
| #include "utils/Compat.h" |
| #include "utils/FileMap.h" |
| #include "ziparchive/zip_archive.h" |
| #include "zlib.h" |
| |
| #include "entry_name_utils-inl.h" |
| #include "zip_archive_common.h" |
| #include "zip_archive_private.h" |
| |
| using android::base::get_unaligned; |
| |
| // This is for windows. If we don't open a file in binary mode, weird |
| // things will happen. |
| #ifndef O_BINARY |
| #define O_BINARY 0 |
| #endif |
| |
| // The maximum number of bytes to scan backwards for the EOCD start. |
| static const uint32_t kMaxEOCDSearch = kMaxCommentLen + sizeof(EocdRecord); |
| |
| static const char* kErrorMessages[] = { |
| "Unknown return code.", |
| "Iteration ended", |
| "Zlib error", |
| "Invalid file", |
| "Invalid handle", |
| "Duplicate entries in archive", |
| "Empty archive", |
| "Entry not found", |
| "Invalid offset", |
| "Inconsistent information", |
| "Invalid entry name", |
| "I/O Error", |
| "File mapping failed" |
| }; |
| |
| static const int32_t kErrorMessageUpperBound = 0; |
| |
| static const int32_t kIterationEnd = -1; |
| |
| // We encountered a Zlib error when inflating a stream from this file. |
| // Usually indicates file corruption. |
| static const int32_t kZlibError = -2; |
| |
| // The input file cannot be processed as a zip archive. Usually because |
| // it's too small, too large or does not have a valid signature. |
| static const int32_t kInvalidFile = -3; |
| |
| // An invalid iteration / ziparchive handle was passed in as an input |
| // argument. |
| static const int32_t kInvalidHandle = -4; |
| |
| // The zip archive contained two (or possibly more) entries with the same |
| // name. |
| static const int32_t kDuplicateEntry = -5; |
| |
| // The zip archive contains no entries. |
| static const int32_t kEmptyArchive = -6; |
| |
| // The specified entry was not found in the archive. |
| static const int32_t kEntryNotFound = -7; |
| |
| // The zip archive contained an invalid local file header pointer. |
| static const int32_t kInvalidOffset = -8; |
| |
| // The zip archive contained inconsistent entry information. This could |
| // be because the central directory & local file header did not agree, or |
| // if the actual uncompressed length or crc32 do not match their declared |
| // values. |
| static const int32_t kInconsistentInformation = -9; |
| |
| // An invalid entry name was encountered. |
| static const int32_t kInvalidEntryName = -10; |
| |
| // An I/O related system call (read, lseek, ftruncate, map) failed. |
| static const int32_t kIoError = -11; |
| |
| // We were not able to mmap the central directory or entry contents. |
| static const int32_t kMmapFailed = -12; |
| |
| static const int32_t kErrorMessageLowerBound = -13; |
| |
| /* |
| * A Read-only Zip archive. |
| * |
| * We want "open" and "find entry by name" to be fast operations, and |
| * we want to use as little memory as possible. We memory-map the zip |
| * central directory, and load a hash table with pointers to the filenames |
| * (which aren't null-terminated). The other fields are at a fixed offset |
| * from the filename, so we don't need to extract those (but we do need |
| * to byte-read and endian-swap them every time we want them). |
| * |
| * It's possible that somebody has handed us a massive (~1GB) zip archive, |
| * so we can't expect to mmap the entire file. |
| * |
| * To speed comparisons when doing a lookup by name, we could make the mapping |
| * "private" (copy-on-write) and null-terminate the filenames after verifying |
| * the record structure. However, this requires a private mapping of |
| * every page that the Central Directory touches. Easier to tuck a copy |
| * of the string length into the hash table entry. |
| */ |
| |
| /* |
| * Round up to the next highest power of 2. |
| * |
| * Found on http://graphics.stanford.edu/~seander/bithacks.html. |
| */ |
| static uint32_t RoundUpPower2(uint32_t val) { |
| val--; |
| val |= val >> 1; |
| val |= val >> 2; |
| val |= val >> 4; |
| val |= val >> 8; |
| val |= val >> 16; |
| val++; |
| |
| return val; |
| } |
| |
| static uint32_t ComputeHash(const ZipString& name) { |
| uint32_t hash = 0; |
| uint16_t len = name.name_length; |
| const uint8_t* str = name.name; |
| |
| while (len--) { |
| hash = hash * 31 + *str++; |
| } |
| |
| return hash; |
| } |
| |
| /* |
| * Convert a ZipEntry to a hash table index, verifying that it's in a |
| * valid range. |
| */ |
| static int64_t EntryToIndex(const ZipString* hash_table, |
| const uint32_t hash_table_size, |
| const ZipString& name) { |
| const uint32_t hash = ComputeHash(name); |
| |
| // NOTE: (hash_table_size - 1) is guaranteed to be non-negative. |
| uint32_t ent = hash & (hash_table_size - 1); |
| while (hash_table[ent].name != NULL) { |
| if (hash_table[ent] == name) { |
| return ent; |
| } |
| |
| ent = (ent + 1) & (hash_table_size - 1); |
| } |
| |
| ALOGV("Zip: Unable to find entry %.*s", name.name_length, name.name); |
| return kEntryNotFound; |
| } |
| |
| /* |
| * Add a new entry to the hash table. |
| */ |
| static int32_t AddToHash(ZipString *hash_table, const uint64_t hash_table_size, |
| const ZipString& name) { |
| const uint64_t hash = ComputeHash(name); |
| uint32_t ent = hash & (hash_table_size - 1); |
| |
| /* |
| * We over-allocated the table, so we're guaranteed to find an empty slot. |
| * Further, we guarantee that the hashtable size is not 0. |
| */ |
| while (hash_table[ent].name != NULL) { |
| if (hash_table[ent] == name) { |
| // We've found a duplicate entry. We don't accept it |
| ALOGW("Zip: Found duplicate entry %.*s", name.name_length, name.name); |
| return kDuplicateEntry; |
| } |
| ent = (ent + 1) & (hash_table_size - 1); |
| } |
| |
| hash_table[ent].name = name.name; |
| hash_table[ent].name_length = name.name_length; |
| return 0; |
| } |
| |
| static int32_t MapCentralDirectory0(int fd, const char* debug_file_name, |
| ZipArchive* archive, off64_t file_length, |
| off64_t read_amount, uint8_t* scan_buffer) { |
| const off64_t search_start = file_length - read_amount; |
| |
| if (lseek64(fd, search_start, SEEK_SET) != search_start) { |
| ALOGW("Zip: seek %" PRId64 " failed: %s", static_cast<int64_t>(search_start), |
| strerror(errno)); |
| return kIoError; |
| } |
| if (!android::base::ReadFully(fd, scan_buffer, static_cast<size_t>(read_amount))) { |
| ALOGW("Zip: read %" PRId64 " failed: %s", static_cast<int64_t>(read_amount), |
| strerror(errno)); |
| return kIoError; |
| } |
| |
| /* |
| * Scan backward for the EOCD magic. In an archive without a trailing |
| * comment, we'll find it on the first try. (We may want to consider |
| * doing an initial minimal read; if we don't find it, retry with a |
| * second read as above.) |
| */ |
| int i = read_amount - sizeof(EocdRecord); |
| for (; i >= 0; i--) { |
| if (scan_buffer[i] == 0x50) { |
| uint32_t* sig_addr = reinterpret_cast<uint32_t*>(&scan_buffer[i]); |
| if (get_unaligned<uint32_t>(sig_addr) == EocdRecord::kSignature) { |
| ALOGV("+++ Found EOCD at buf+%d", i); |
| break; |
| } |
| } |
| } |
| if (i < 0) { |
| ALOGD("Zip: EOCD not found, %s is not zip", debug_file_name); |
| return kInvalidFile; |
| } |
| |
| const off64_t eocd_offset = search_start + i; |
| const EocdRecord* eocd = reinterpret_cast<const EocdRecord*>(scan_buffer + i); |
| /* |
| * Verify that there's no trailing space at the end of the central directory |
| * and its comment. |
| */ |
| const off64_t calculated_length = eocd_offset + sizeof(EocdRecord) |
| + eocd->comment_length; |
| if (calculated_length != file_length) { |
| ALOGW("Zip: %" PRId64 " extraneous bytes at the end of the central directory", |
| static_cast<int64_t>(file_length - calculated_length)); |
| return kInvalidFile; |
| } |
| |
| /* |
| * Grab the CD offset and size, and the number of entries in the |
| * archive and verify that they look reasonable. |
| */ |
| if (static_cast<off64_t>(eocd->cd_start_offset) + eocd->cd_size > eocd_offset) { |
| ALOGW("Zip: bad offsets (dir %" PRIu32 ", size %" PRIu32 ", eocd %" PRId64 ")", |
| eocd->cd_start_offset, eocd->cd_size, static_cast<int64_t>(eocd_offset)); |
| #if defined(__ANDROID__) |
| if (eocd->cd_start_offset + eocd->cd_size <= eocd_offset) { |
| android_errorWriteLog(0x534e4554, "31251826"); |
| } |
| #endif |
| return kInvalidOffset; |
| } |
| if (eocd->num_records == 0) { |
| ALOGW("Zip: empty archive?"); |
| return kEmptyArchive; |
| } |
| |
| ALOGV("+++ num_entries=%" PRIu32 " dir_size=%" PRIu32 " dir_offset=%" PRIu32, |
| eocd->num_records, eocd->cd_size, eocd->cd_start_offset); |
| |
| /* |
| * It all looks good. Create a mapping for the CD, and set the fields |
| * in archive. |
| */ |
| if (!archive->directory_map.create(debug_file_name, fd, |
| static_cast<off64_t>(eocd->cd_start_offset), |
| static_cast<size_t>(eocd->cd_size), true /* read only */) ) { |
| return kMmapFailed; |
| } |
| |
| archive->num_entries = eocd->num_records; |
| archive->directory_offset = eocd->cd_start_offset; |
| |
| return 0; |
| } |
| |
| /* |
| * Find the zip Central Directory and memory-map it. |
| * |
| * On success, returns 0 after populating fields from the EOCD area: |
| * directory_offset |
| * directory_map |
| * num_entries |
| */ |
| static int32_t MapCentralDirectory(int fd, const char* debug_file_name, |
| ZipArchive* archive) { |
| |
| // Test file length. We use lseek64 to make sure the file |
| // is small enough to be a zip file (Its size must be less than |
| // 0xffffffff bytes). |
| off64_t file_length = lseek64(fd, 0, SEEK_END); |
| if (file_length == -1) { |
| ALOGV("Zip: lseek on fd %d failed", fd); |
| return kInvalidFile; |
| } |
| |
| if (file_length > static_cast<off64_t>(0xffffffff)) { |
| ALOGV("Zip: zip file too long %" PRId64, static_cast<int64_t>(file_length)); |
| return kInvalidFile; |
| } |
| |
| if (file_length < static_cast<off64_t>(sizeof(EocdRecord))) { |
| ALOGV("Zip: length %" PRId64 " is too small to be zip", static_cast<int64_t>(file_length)); |
| return kInvalidFile; |
| } |
| |
| /* |
| * Perform the traditional EOCD snipe hunt. |
| * |
| * We're searching for the End of Central Directory magic number, |
| * which appears at the start of the EOCD block. It's followed by |
| * 18 bytes of EOCD stuff and up to 64KB of archive comment. We |
| * need to read the last part of the file into a buffer, dig through |
| * it to find the magic number, parse some values out, and use those |
| * to determine the extent of the CD. |
| * |
| * We start by pulling in the last part of the file. |
| */ |
| off64_t read_amount = kMaxEOCDSearch; |
| if (file_length < read_amount) { |
| read_amount = file_length; |
| } |
| |
| uint8_t* scan_buffer = reinterpret_cast<uint8_t*>(malloc(read_amount)); |
| int32_t result = MapCentralDirectory0(fd, debug_file_name, archive, |
| file_length, read_amount, scan_buffer); |
| |
| free(scan_buffer); |
| return result; |
| } |
| |
| /* |
| * Parses the Zip archive's Central Directory. Allocates and populates the |
| * hash table. |
| * |
| * Returns 0 on success. |
| */ |
| static int32_t ParseZipArchive(ZipArchive* archive) { |
| const uint8_t* const cd_ptr = |
| reinterpret_cast<const uint8_t*>(archive->directory_map.getDataPtr()); |
| const size_t cd_length = archive->directory_map.getDataLength(); |
| const uint16_t num_entries = archive->num_entries; |
| |
| /* |
| * Create hash table. We have a minimum 75% load factor, possibly as |
| * low as 50% after we round off to a power of 2. There must be at |
| * least one unused entry to avoid an infinite loop during creation. |
| */ |
| archive->hash_table_size = RoundUpPower2(1 + (num_entries * 4) / 3); |
| archive->hash_table = reinterpret_cast<ZipString*>(calloc(archive->hash_table_size, |
| sizeof(ZipString))); |
| |
| /* |
| * Walk through the central directory, adding entries to the hash |
| * table and verifying values. |
| */ |
| const uint8_t* const cd_end = cd_ptr + cd_length; |
| const uint8_t* ptr = cd_ptr; |
| for (uint16_t i = 0; i < num_entries; i++) { |
| if (ptr > cd_end - sizeof(CentralDirectoryRecord)) { |
| ALOGW("Zip: ran off the end (at %" PRIu16 ")", i); |
| #if defined(__ANDROID__) |
| android_errorWriteLog(0x534e4554, "36392138"); |
| #endif |
| return -1; |
| } |
| |
| const CentralDirectoryRecord* cdr = |
| reinterpret_cast<const CentralDirectoryRecord*>(ptr); |
| if (cdr->record_signature != CentralDirectoryRecord::kSignature) { |
| ALOGW("Zip: missed a central dir sig (at %" PRIu16 ")", i); |
| return -1; |
| } |
| |
| const off64_t local_header_offset = cdr->local_file_header_offset; |
| if (local_header_offset >= archive->directory_offset) { |
| ALOGW("Zip: bad LFH offset %" PRId64 " at entry %" PRIu16, |
| static_cast<int64_t>(local_header_offset), i); |
| return -1; |
| } |
| |
| const uint16_t file_name_length = cdr->file_name_length; |
| const uint16_t extra_length = cdr->extra_field_length; |
| const uint16_t comment_length = cdr->comment_length; |
| const uint8_t* file_name = ptr + sizeof(CentralDirectoryRecord); |
| |
| /* check that file name is valid UTF-8 and doesn't contain NUL (U+0000) characters */ |
| if (!IsValidEntryName(file_name, file_name_length)) { |
| return -1; |
| } |
| |
| /* add the CDE filename to the hash table */ |
| ZipString entry_name; |
| entry_name.name = file_name; |
| entry_name.name_length = file_name_length; |
| const int add_result = AddToHash(archive->hash_table, |
| archive->hash_table_size, entry_name); |
| if (add_result != 0) { |
| ALOGW("Zip: Error adding entry to hash table %d", add_result); |
| return add_result; |
| } |
| |
| ptr += sizeof(CentralDirectoryRecord) + file_name_length + extra_length + comment_length; |
| if ((ptr - cd_ptr) > static_cast<int64_t>(cd_length)) { |
| ALOGW("Zip: bad CD advance (%tu vs %zu) at entry %" PRIu16, |
| ptr - cd_ptr, cd_length, i); |
| return -1; |
| } |
| } |
| ALOGV("+++ zip good scan %" PRIu16 " entries", num_entries); |
| |
| return 0; |
| } |
| |
| static int32_t OpenArchiveInternal(ZipArchive* archive, |
| const char* debug_file_name) { |
| int32_t result = -1; |
| if ((result = MapCentralDirectory(archive->fd, debug_file_name, archive))) { |
| return result; |
| } |
| |
| if ((result = ParseZipArchive(archive))) { |
| return result; |
| } |
| |
| return 0; |
| } |
| |
| int32_t OpenArchiveFd(int fd, const char* debug_file_name, |
| ZipArchiveHandle* handle, bool assume_ownership) { |
| ZipArchive* archive = new ZipArchive(fd, assume_ownership); |
| *handle = archive; |
| return OpenArchiveInternal(archive, debug_file_name); |
| } |
| |
| int32_t OpenArchive(const char* fileName, ZipArchiveHandle* handle) { |
| const int fd = open(fileName, O_RDONLY | O_BINARY, 0); |
| ZipArchive* archive = new ZipArchive(fd, true); |
| *handle = archive; |
| |
| if (fd < 0) { |
| ALOGW("Unable to open '%s': %s", fileName, strerror(errno)); |
| return kIoError; |
| } |
| |
| return OpenArchiveInternal(archive, fileName); |
| } |
| |
| /* |
| * Close a ZipArchive, closing the file and freeing the contents. |
| */ |
| void CloseArchive(ZipArchiveHandle handle) { |
| ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); |
| ALOGV("Closing archive %p", archive); |
| delete archive; |
| } |
| |
| static int32_t UpdateEntryFromDataDescriptor(int fd, |
| ZipEntry *entry) { |
| uint8_t ddBuf[sizeof(DataDescriptor) + sizeof(DataDescriptor::kOptSignature)]; |
| if (!android::base::ReadFully(fd, ddBuf, sizeof(ddBuf))) { |
| return kIoError; |
| } |
| |
| const uint32_t ddSignature = *(reinterpret_cast<const uint32_t*>(ddBuf)); |
| const uint16_t offset = (ddSignature == DataDescriptor::kOptSignature) ? 4 : 0; |
| const DataDescriptor* descriptor = reinterpret_cast<const DataDescriptor*>(ddBuf + offset); |
| |
| entry->crc32 = descriptor->crc32; |
| entry->compressed_length = descriptor->compressed_size; |
| entry->uncompressed_length = descriptor->uncompressed_size; |
| |
| return 0; |
| } |
| |
| // Attempts to read |len| bytes into |buf| at offset |off|. |
| // On non-Windows platforms, callers are guaranteed that the |fd| |
| // offset is unchanged and there is no side effect to this call. |
| // |
| // On Windows platforms this is not thread-safe. |
| static inline bool ReadAtOffset(int fd, uint8_t* buf, size_t len, off64_t off) { |
| #if !defined(_WIN32) |
| return TEMP_FAILURE_RETRY(pread64(fd, buf, len, off)); |
| #else |
| if (lseek64(fd, off, SEEK_SET) != off) { |
| ALOGW("Zip: failed seek to offset %" PRId64, off); |
| return false; |
| } |
| return android::base::ReadFully(fd, buf, len); |
| #endif |
| } |
| |
| static int32_t FindEntry(const ZipArchive* archive, const int ent, |
| ZipEntry* data) { |
| const uint16_t nameLen = archive->hash_table[ent].name_length; |
| |
| // Recover the start of the central directory entry from the filename |
| // pointer. The filename is the first entry past the fixed-size data, |
| // so we can just subtract back from that. |
| const uint8_t* ptr = archive->hash_table[ent].name; |
| ptr -= sizeof(CentralDirectoryRecord); |
| |
| // This is the base of our mmapped region, we have to sanity check that |
| // the name that's in the hash table is a pointer to a location within |
| // this mapped region. |
| const uint8_t* base_ptr = reinterpret_cast<const uint8_t*>( |
| archive->directory_map.getDataPtr()); |
| if (ptr < base_ptr || ptr > base_ptr + archive->directory_map.getDataLength()) { |
| ALOGW("Zip: Invalid entry pointer"); |
| return kInvalidOffset; |
| } |
| |
| const CentralDirectoryRecord *cdr = |
| reinterpret_cast<const CentralDirectoryRecord*>(ptr); |
| |
| // The offset of the start of the central directory in the zipfile. |
| // We keep this lying around so that we can sanity check all our lengths |
| // and our per-file structures. |
| const off64_t cd_offset = archive->directory_offset; |
| |
| // Fill out the compression method, modification time, crc32 |
| // and other interesting attributes from the central directory. These |
| // will later be compared against values from the local file header. |
| data->method = cdr->compression_method; |
| data->mod_time = cdr->last_mod_date << 16 | cdr->last_mod_time; |
| data->crc32 = cdr->crc32; |
| data->compressed_length = cdr->compressed_size; |
| data->uncompressed_length = cdr->uncompressed_size; |
| |
| // Figure out the local header offset from the central directory. The |
| // actual file data will begin after the local header and the name / |
| // extra comments. |
| const off64_t local_header_offset = cdr->local_file_header_offset; |
| if (local_header_offset + static_cast<off64_t>(sizeof(LocalFileHeader)) >= cd_offset) { |
| ALOGW("Zip: bad local hdr offset in zip"); |
| return kInvalidOffset; |
| } |
| |
| uint8_t lfh_buf[sizeof(LocalFileHeader)]; |
| if (!ReadAtOffset(archive->fd, lfh_buf, sizeof(lfh_buf), local_header_offset)) { |
| ALOGW("Zip: failed reading lfh name from offset %" PRId64, |
| static_cast<int64_t>(local_header_offset)); |
| return kIoError; |
| } |
| |
| const LocalFileHeader *lfh = reinterpret_cast<const LocalFileHeader*>(lfh_buf); |
| |
| if (lfh->lfh_signature != LocalFileHeader::kSignature) { |
| ALOGW("Zip: didn't find signature at start of lfh, offset=%" PRId64, |
| static_cast<int64_t>(local_header_offset)); |
| return kInvalidOffset; |
| } |
| |
| // Paranoia: Match the values specified in the local file header |
| // to those specified in the central directory. |
| if ((lfh->gpb_flags & kGPBDDFlagMask) == 0) { |
| data->has_data_descriptor = 0; |
| if (data->compressed_length != lfh->compressed_size |
| || data->uncompressed_length != lfh->uncompressed_size |
| || data->crc32 != lfh->crc32) { |
| ALOGW("Zip: size/crc32 mismatch. expected {%" PRIu32 ", %" PRIu32 |
| ", %" PRIx32 "}, was {%" PRIu32 ", %" PRIu32 ", %" PRIx32 "}", |
| data->compressed_length, data->uncompressed_length, data->crc32, |
| lfh->compressed_size, lfh->uncompressed_size, lfh->crc32); |
| return kInconsistentInformation; |
| } |
| } else { |
| data->has_data_descriptor = 1; |
| } |
| |
| // Check that the local file header name matches the declared |
| // name in the central directory. |
| if (lfh->file_name_length == nameLen) { |
| const off64_t name_offset = local_header_offset + sizeof(LocalFileHeader); |
| if (name_offset + lfh->file_name_length > cd_offset) { |
| ALOGW("Zip: Invalid declared length"); |
| return kInvalidOffset; |
| } |
| |
| uint8_t* name_buf = reinterpret_cast<uint8_t*>(malloc(nameLen)); |
| if (!ReadAtOffset(archive->fd, name_buf, nameLen, name_offset)) { |
| ALOGW("Zip: failed reading lfh name from offset %" PRId64, static_cast<int64_t>(name_offset)); |
| free(name_buf); |
| return kIoError; |
| } |
| |
| if (memcmp(archive->hash_table[ent].name, name_buf, nameLen)) { |
| free(name_buf); |
| return kInconsistentInformation; |
| } |
| |
| free(name_buf); |
| } else { |
| ALOGW("Zip: lfh name did not match central directory."); |
| return kInconsistentInformation; |
| } |
| |
| const off64_t data_offset = local_header_offset + sizeof(LocalFileHeader) |
| + lfh->file_name_length + lfh->extra_field_length; |
| if (data_offset > cd_offset) { |
| ALOGW("Zip: bad data offset %" PRId64 " in zip", static_cast<int64_t>(data_offset)); |
| return kInvalidOffset; |
| } |
| |
| if (static_cast<off64_t>(data_offset + data->compressed_length) > cd_offset) { |
| ALOGW("Zip: bad compressed length in zip (%" PRId64 " + %" PRIu32 " > %" PRId64 ")", |
| static_cast<int64_t>(data_offset), data->compressed_length, static_cast<int64_t>(cd_offset)); |
| return kInvalidOffset; |
| } |
| |
| if (data->method == kCompressStored && |
| static_cast<off64_t>(data_offset + data->uncompressed_length) > cd_offset) { |
| ALOGW("Zip: bad uncompressed length in zip (%" PRId64 " + %" PRIu32 " > %" PRId64 ")", |
| static_cast<int64_t>(data_offset), data->uncompressed_length, |
| static_cast<int64_t>(cd_offset)); |
| return kInvalidOffset; |
| } |
| |
| data->offset = data_offset; |
| return 0; |
| } |
| |
| struct IterationHandle { |
| uint32_t position; |
| // We're not using vector here because this code is used in the Windows SDK |
| // where the STL is not available. |
| ZipString prefix; |
| ZipString suffix; |
| ZipArchive* archive; |
| |
| IterationHandle(const ZipString* in_prefix, |
| const ZipString* in_suffix) { |
| if (in_prefix) { |
| uint8_t* name_copy = new uint8_t[in_prefix->name_length]; |
| memcpy(name_copy, in_prefix->name, in_prefix->name_length); |
| prefix.name = name_copy; |
| prefix.name_length = in_prefix->name_length; |
| } else { |
| prefix.name = NULL; |
| prefix.name_length = 0; |
| } |
| if (in_suffix) { |
| uint8_t* name_copy = new uint8_t[in_suffix->name_length]; |
| memcpy(name_copy, in_suffix->name, in_suffix->name_length); |
| suffix.name = name_copy; |
| suffix.name_length = in_suffix->name_length; |
| } else { |
| suffix.name = NULL; |
| suffix.name_length = 0; |
| } |
| } |
| |
| ~IterationHandle() { |
| delete[] prefix.name; |
| delete[] suffix.name; |
| } |
| }; |
| |
| int32_t StartIteration(ZipArchiveHandle handle, void** cookie_ptr, |
| const ZipString* optional_prefix, |
| const ZipString* optional_suffix) { |
| ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); |
| |
| if (archive == NULL || archive->hash_table == NULL) { |
| ALOGW("Zip: Invalid ZipArchiveHandle"); |
| return kInvalidHandle; |
| } |
| |
| IterationHandle* cookie = new IterationHandle(optional_prefix, optional_suffix); |
| cookie->position = 0; |
| cookie->archive = archive; |
| |
| *cookie_ptr = cookie ; |
| return 0; |
| } |
| |
| void EndIteration(void* cookie) { |
| delete reinterpret_cast<IterationHandle*>(cookie); |
| } |
| |
| int32_t FindEntry(const ZipArchiveHandle handle, const ZipString& entryName, |
| ZipEntry* data) { |
| const ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); |
| if (entryName.name_length == 0) { |
| ALOGW("Zip: Invalid filename %.*s", entryName.name_length, entryName.name); |
| return kInvalidEntryName; |
| } |
| |
| const int64_t ent = EntryToIndex(archive->hash_table, |
| archive->hash_table_size, entryName); |
| |
| if (ent < 0) { |
| ALOGV("Zip: Could not find entry %.*s", entryName.name_length, entryName.name); |
| return ent; |
| } |
| |
| return FindEntry(archive, ent, data); |
| } |
| |
| int32_t Next(void* cookie, ZipEntry* data, ZipString* name) { |
| IterationHandle* handle = reinterpret_cast<IterationHandle*>(cookie); |
| if (handle == NULL) { |
| return kInvalidHandle; |
| } |
| |
| ZipArchive* archive = handle->archive; |
| if (archive == NULL || archive->hash_table == NULL) { |
| ALOGW("Zip: Invalid ZipArchiveHandle"); |
| return kInvalidHandle; |
| } |
| |
| const uint32_t currentOffset = handle->position; |
| const uint32_t hash_table_length = archive->hash_table_size; |
| const ZipString* hash_table = archive->hash_table; |
| |
| for (uint32_t i = currentOffset; i < hash_table_length; ++i) { |
| if (hash_table[i].name != NULL && |
| (handle->prefix.name_length == 0 || |
| hash_table[i].StartsWith(handle->prefix)) && |
| (handle->suffix.name_length == 0 || |
| hash_table[i].EndsWith(handle->suffix))) { |
| handle->position = (i + 1); |
| const int error = FindEntry(archive, i, data); |
| if (!error) { |
| name->name = hash_table[i].name; |
| name->name_length = hash_table[i].name_length; |
| } |
| |
| return error; |
| } |
| } |
| |
| handle->position = 0; |
| return kIterationEnd; |
| } |
| |
| class Writer { |
| public: |
| virtual bool Append(uint8_t* buf, size_t buf_size) = 0; |
| virtual ~Writer() {} |
| protected: |
| Writer() = default; |
| private: |
| DISALLOW_COPY_AND_ASSIGN(Writer); |
| }; |
| |
| // A Writer that writes data to a fixed size memory region. |
| // The size of the memory region must be equal to the total size of |
| // the data appended to it. |
| class MemoryWriter : public Writer { |
| public: |
| MemoryWriter(uint8_t* buf, size_t size) : Writer(), |
| buf_(buf), size_(size), bytes_written_(0) { |
| } |
| |
| virtual bool Append(uint8_t* buf, size_t buf_size) override { |
| if (bytes_written_ + buf_size > size_) { |
| ALOGW("Zip: Unexpected size " ZD " (declared) vs " ZD " (actual)", |
| size_, bytes_written_ + buf_size); |
| return false; |
| } |
| |
| memcpy(buf_ + bytes_written_, buf, buf_size); |
| bytes_written_ += buf_size; |
| return true; |
| } |
| |
| private: |
| uint8_t* const buf_; |
| const size_t size_; |
| size_t bytes_written_; |
| }; |
| |
| // A Writer that appends data to a file |fd| at its current position. |
| // The file will be truncated to the end of the written data. |
| class FileWriter : public Writer { |
| public: |
| |
| // Creates a FileWriter for |fd| and prepare to write |entry| to it, |
| // guaranteeing that the file descriptor is valid and that there's enough |
| // space on the volume to write out the entry completely and that the file |
| // is truncated to the correct length. |
| // |
| // Returns a valid FileWriter on success, |nullptr| if an error occurred. |
| static std::unique_ptr<FileWriter> Create(int fd, const ZipEntry* entry) { |
| const uint32_t declared_length = entry->uncompressed_length; |
| const off64_t current_offset = lseek64(fd, 0, SEEK_CUR); |
| if (current_offset == -1) { |
| ALOGW("Zip: unable to seek to current location on fd %d: %s", fd, strerror(errno)); |
| return nullptr; |
| } |
| |
| int result = 0; |
| #if defined(__linux__) |
| if (declared_length > 0) { |
| // Make sure we have enough space on the volume to extract the compressed |
| // entry. Note that the call to ftruncate below will change the file size but |
| // will not allocate space on disk and this call to fallocate will not |
| // change the file size. |
| // Note: fallocate is only supported by the following filesystems - |
| // btrfs, ext4, ocfs2, and xfs. Therefore fallocate might fail with |
| // EOPNOTSUPP error when issued in other filesystems. |
| // Hence, check for the return error code before concluding that the |
| // disk does not have enough space. |
| result = TEMP_FAILURE_RETRY(fallocate(fd, 0, current_offset, declared_length)); |
| if (result == -1 && errno == ENOSPC) { |
| ALOGW("Zip: unable to allocate space for file to %" PRId64 ": %s", |
| static_cast<int64_t>(declared_length + current_offset), strerror(errno)); |
| return std::unique_ptr<FileWriter>(nullptr); |
| } |
| } |
| #endif // __linux__ |
| |
| result = TEMP_FAILURE_RETRY(ftruncate(fd, declared_length + current_offset)); |
| if (result == -1) { |
| ALOGW("Zip: unable to truncate file to %" PRId64 ": %s", |
| static_cast<int64_t>(declared_length + current_offset), strerror(errno)); |
| return std::unique_ptr<FileWriter>(nullptr); |
| } |
| |
| return std::unique_ptr<FileWriter>(new FileWriter(fd, declared_length)); |
| } |
| |
| virtual bool Append(uint8_t* buf, size_t buf_size) override { |
| if (total_bytes_written_ + buf_size > declared_length_) { |
| ALOGW("Zip: Unexpected size " ZD " (declared) vs " ZD " (actual)", |
| declared_length_, total_bytes_written_ + buf_size); |
| return false; |
| } |
| |
| const bool result = android::base::WriteFully(fd_, buf, buf_size); |
| if (result) { |
| total_bytes_written_ += buf_size; |
| } else { |
| ALOGW("Zip: unable to write " ZD " bytes to file; %s", buf_size, strerror(errno)); |
| } |
| |
| return result; |
| } |
| private: |
| FileWriter(const int fd, const size_t declared_length) : |
| Writer(), |
| fd_(fd), |
| declared_length_(declared_length), |
| total_bytes_written_(0) { |
| } |
| |
| const int fd_; |
| const size_t declared_length_; |
| size_t total_bytes_written_; |
| }; |
| |
| // This method is using libz macros with old-style-casts |
| #pragma GCC diagnostic push |
| #pragma GCC diagnostic ignored "-Wold-style-cast" |
| static inline int zlib_inflateInit2(z_stream* stream, int window_bits) { |
| return inflateInit2(stream, window_bits); |
| } |
| #pragma GCC diagnostic pop |
| |
| static int32_t InflateEntryToWriter(int fd, const ZipEntry* entry, |
| Writer* writer, uint64_t* crc_out) { |
| const size_t kBufSize = 32768; |
| std::vector<uint8_t> read_buf(kBufSize); |
| std::vector<uint8_t> write_buf(kBufSize); |
| z_stream zstream; |
| int zerr; |
| |
| /* |
| * Initialize the zlib stream struct. |
| */ |
| memset(&zstream, 0, sizeof(zstream)); |
| zstream.zalloc = Z_NULL; |
| zstream.zfree = Z_NULL; |
| zstream.opaque = Z_NULL; |
| zstream.next_in = NULL; |
| zstream.avail_in = 0; |
| zstream.next_out = &write_buf[0]; |
| zstream.avail_out = kBufSize; |
| zstream.data_type = Z_UNKNOWN; |
| |
| /* |
| * Use the undocumented "negative window bits" feature to tell zlib |
| * that there's no zlib header waiting for it. |
| */ |
| zerr = zlib_inflateInit2(&zstream, -MAX_WBITS); |
| if (zerr != Z_OK) { |
| if (zerr == Z_VERSION_ERROR) { |
| ALOGE("Installed zlib is not compatible with linked version (%s)", |
| ZLIB_VERSION); |
| } else { |
| ALOGW("Call to inflateInit2 failed (zerr=%d)", zerr); |
| } |
| |
| return kZlibError; |
| } |
| |
| auto zstream_deleter = [](z_stream* stream) { |
| inflateEnd(stream); /* free up any allocated structures */ |
| }; |
| |
| std::unique_ptr<z_stream, decltype(zstream_deleter)> zstream_guard(&zstream, zstream_deleter); |
| |
| const uint32_t uncompressed_length = entry->uncompressed_length; |
| |
| uint32_t compressed_length = entry->compressed_length; |
| do { |
| /* read as much as we can */ |
| if (zstream.avail_in == 0) { |
| const size_t getSize = (compressed_length > kBufSize) ? kBufSize : compressed_length; |
| if (!android::base::ReadFully(fd, read_buf.data(), getSize)) { |
| ALOGW("Zip: inflate read failed, getSize = %zu: %s", getSize, strerror(errno)); |
| return kIoError; |
| } |
| |
| compressed_length -= getSize; |
| |
| zstream.next_in = &read_buf[0]; |
| zstream.avail_in = getSize; |
| } |
| |
| /* uncompress the data */ |
| zerr = inflate(&zstream, Z_NO_FLUSH); |
| if (zerr != Z_OK && zerr != Z_STREAM_END) { |
| ALOGW("Zip: inflate zerr=%d (nIn=%p aIn=%u nOut=%p aOut=%u)", |
| zerr, zstream.next_in, zstream.avail_in, |
| zstream.next_out, zstream.avail_out); |
| return kZlibError; |
| } |
| |
| /* write when we're full or when we're done */ |
| if (zstream.avail_out == 0 || |
| (zerr == Z_STREAM_END && zstream.avail_out != kBufSize)) { |
| const size_t write_size = zstream.next_out - &write_buf[0]; |
| if (!writer->Append(&write_buf[0], write_size)) { |
| // The file might have declared a bogus length. |
| return kInconsistentInformation; |
| } |
| |
| zstream.next_out = &write_buf[0]; |
| zstream.avail_out = kBufSize; |
| } |
| } while (zerr == Z_OK); |
| |
| assert(zerr == Z_STREAM_END); /* other errors should've been caught */ |
| |
| // stream.adler holds the crc32 value for such streams. |
| *crc_out = zstream.adler; |
| |
| if (zstream.total_out != uncompressed_length || compressed_length != 0) { |
| ALOGW("Zip: size mismatch on inflated file (%lu vs %" PRIu32 ")", |
| zstream.total_out, uncompressed_length); |
| return kInconsistentInformation; |
| } |
| |
| return 0; |
| } |
| |
| static int32_t CopyEntryToWriter(int fd, const ZipEntry* entry, Writer* writer, |
| uint64_t *crc_out) { |
| static const uint32_t kBufSize = 32768; |
| std::vector<uint8_t> buf(kBufSize); |
| |
| const uint32_t length = entry->uncompressed_length; |
| uint32_t count = 0; |
| uint64_t crc = 0; |
| while (count < length) { |
| uint32_t remaining = length - count; |
| |
| // Safe conversion because kBufSize is narrow enough for a 32 bit signed |
| // value. |
| const size_t block_size = (remaining > kBufSize) ? kBufSize : remaining; |
| if (!android::base::ReadFully(fd, buf.data(), block_size)) { |
| ALOGW("CopyFileToFile: copy read failed, block_size = %zu: %s", block_size, strerror(errno)); |
| return kIoError; |
| } |
| |
| if (!writer->Append(&buf[0], block_size)) { |
| return kIoError; |
| } |
| crc = crc32(crc, &buf[0], block_size); |
| count += block_size; |
| } |
| |
| *crc_out = crc; |
| |
| return 0; |
| } |
| |
| int32_t ExtractToWriter(ZipArchiveHandle handle, |
| ZipEntry* entry, Writer* writer) { |
| ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); |
| const uint16_t method = entry->method; |
| off64_t data_offset = entry->offset; |
| |
| if (lseek64(archive->fd, data_offset, SEEK_SET) != data_offset) { |
| ALOGW("Zip: lseek to data at %" PRId64 " failed", static_cast<int64_t>(data_offset)); |
| return kIoError; |
| } |
| |
| // this should default to kUnknownCompressionMethod. |
| int32_t return_value = -1; |
| uint64_t crc = 0; |
| if (method == kCompressStored) { |
| return_value = CopyEntryToWriter(archive->fd, entry, writer, &crc); |
| } else if (method == kCompressDeflated) { |
| return_value = InflateEntryToWriter(archive->fd, entry, writer, &crc); |
| } |
| |
| if (!return_value && entry->has_data_descriptor) { |
| return_value = UpdateEntryFromDataDescriptor(archive->fd, entry); |
| if (return_value) { |
| return return_value; |
| } |
| } |
| |
| // TODO: Fix this check by passing the right flags to inflate2 so that |
| // it calculates the CRC for us. |
| if (entry->crc32 != crc && false) { |
| ALOGW("Zip: crc mismatch: expected %" PRIu32 ", was %" PRIu64, entry->crc32, crc); |
| return kInconsistentInformation; |
| } |
| |
| return return_value; |
| } |
| |
| int32_t ExtractToMemory(ZipArchiveHandle handle, ZipEntry* entry, |
| uint8_t* begin, uint32_t size) { |
| std::unique_ptr<Writer> writer(new MemoryWriter(begin, size)); |
| return ExtractToWriter(handle, entry, writer.get()); |
| } |
| |
| int32_t ExtractEntryToFile(ZipArchiveHandle handle, |
| ZipEntry* entry, int fd) { |
| std::unique_ptr<Writer> writer(FileWriter::Create(fd, entry)); |
| if (writer.get() == nullptr) { |
| return kIoError; |
| } |
| |
| return ExtractToWriter(handle, entry, writer.get()); |
| } |
| |
| const char* ErrorCodeString(int32_t error_code) { |
| if (error_code > kErrorMessageLowerBound && error_code < kErrorMessageUpperBound) { |
| return kErrorMessages[error_code * -1]; |
| } |
| |
| return kErrorMessages[0]; |
| } |
| |
| int GetFileDescriptor(const ZipArchiveHandle handle) { |
| return reinterpret_cast<ZipArchive*>(handle)->fd; |
| } |