| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define TRACE_TAG USB |
| |
| #include "sysdeps.h" |
| |
| #include <cutils/properties.h> |
| #include <dirent.h> |
| #include <errno.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/functionfs.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/ioctl.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| |
| #include <algorithm> |
| #include <atomic> |
| |
| #include <android-base/logging.h> |
| |
| #include "adb.h" |
| #include "transport.h" |
| |
| #define MAX_PACKET_SIZE_FS 64 |
| #define MAX_PACKET_SIZE_HS 512 |
| #define MAX_PACKET_SIZE_SS 1024 |
| |
| // Writes larger than 16k fail on some devices (seed with 3.10.49-g209ea2f in particular). |
| #define USB_FFS_MAX_WRITE 16384 |
| |
| // The kernel allocates a contiguous buffer for reads, which can fail for large ones due to |
| // fragmentation. 16k chosen arbitrarily to match the write limit. |
| #define USB_FFS_MAX_READ 16384 |
| |
| #define cpu_to_le16(x) htole16(x) |
| #define cpu_to_le32(x) htole32(x) |
| |
| static int dummy_fd = -1; |
| |
| struct usb_handle |
| { |
| adb_cond_t notify; |
| adb_mutex_t lock; |
| bool open_new_connection; |
| std::atomic<bool> kicked; |
| |
| int (*write)(usb_handle *h, const void *data, int len); |
| int (*read)(usb_handle *h, void *data, int len); |
| void (*kick)(usb_handle *h); |
| void (*close)(usb_handle *h); |
| |
| // Legacy f_adb |
| int fd; |
| |
| // FunctionFS |
| int control; |
| int bulk_out; /* "out" from the host's perspective => source for adbd */ |
| int bulk_in; /* "in" from the host's perspective => sink for adbd */ |
| }; |
| |
| struct func_desc { |
| struct usb_interface_descriptor intf; |
| struct usb_endpoint_descriptor_no_audio source; |
| struct usb_endpoint_descriptor_no_audio sink; |
| } __attribute__((packed)); |
| |
| struct ss_func_desc { |
| struct usb_interface_descriptor intf; |
| struct usb_endpoint_descriptor_no_audio source; |
| struct usb_ss_ep_comp_descriptor source_comp; |
| struct usb_endpoint_descriptor_no_audio sink; |
| struct usb_ss_ep_comp_descriptor sink_comp; |
| } __attribute__((packed)); |
| |
| struct desc_v1 { |
| struct usb_functionfs_descs_head_v1 { |
| __le32 magic; |
| __le32 length; |
| __le32 fs_count; |
| __le32 hs_count; |
| } __attribute__((packed)) header; |
| struct func_desc fs_descs, hs_descs; |
| } __attribute__((packed)); |
| |
| struct desc_v2 { |
| struct usb_functionfs_descs_head_v2 header; |
| // The rest of the structure depends on the flags in the header. |
| __le32 fs_count; |
| __le32 hs_count; |
| __le32 ss_count; |
| __le32 os_count; |
| struct func_desc fs_descs, hs_descs; |
| struct ss_func_desc ss_descs; |
| struct usb_os_desc_header os_header; |
| struct usb_ext_compat_desc os_desc; |
| } __attribute__((packed)); |
| |
| static struct func_desc fs_descriptors = { |
| .intf = { |
| .bLength = sizeof(fs_descriptors.intf), |
| .bDescriptorType = USB_DT_INTERFACE, |
| .bInterfaceNumber = 0, |
| .bNumEndpoints = 2, |
| .bInterfaceClass = ADB_CLASS, |
| .bInterfaceSubClass = ADB_SUBCLASS, |
| .bInterfaceProtocol = ADB_PROTOCOL, |
| .iInterface = 1, /* first string from the provided table */ |
| }, |
| .source = { |
| .bLength = sizeof(fs_descriptors.source), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = 1 | USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = MAX_PACKET_SIZE_FS, |
| }, |
| .sink = { |
| .bLength = sizeof(fs_descriptors.sink), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = 2 | USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = MAX_PACKET_SIZE_FS, |
| }, |
| }; |
| |
| static struct func_desc hs_descriptors = { |
| .intf = { |
| .bLength = sizeof(hs_descriptors.intf), |
| .bDescriptorType = USB_DT_INTERFACE, |
| .bInterfaceNumber = 0, |
| .bNumEndpoints = 2, |
| .bInterfaceClass = ADB_CLASS, |
| .bInterfaceSubClass = ADB_SUBCLASS, |
| .bInterfaceProtocol = ADB_PROTOCOL, |
| .iInterface = 1, /* first string from the provided table */ |
| }, |
| .source = { |
| .bLength = sizeof(hs_descriptors.source), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = 1 | USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = MAX_PACKET_SIZE_HS, |
| }, |
| .sink = { |
| .bLength = sizeof(hs_descriptors.sink), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = 2 | USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = MAX_PACKET_SIZE_HS, |
| }, |
| }; |
| |
| static struct ss_func_desc ss_descriptors = { |
| .intf = { |
| .bLength = sizeof(ss_descriptors.intf), |
| .bDescriptorType = USB_DT_INTERFACE, |
| .bInterfaceNumber = 0, |
| .bNumEndpoints = 2, |
| .bInterfaceClass = ADB_CLASS, |
| .bInterfaceSubClass = ADB_SUBCLASS, |
| .bInterfaceProtocol = ADB_PROTOCOL, |
| .iInterface = 1, /* first string from the provided table */ |
| }, |
| .source = { |
| .bLength = sizeof(ss_descriptors.source), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = 1 | USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = MAX_PACKET_SIZE_SS, |
| }, |
| .source_comp = { |
| .bLength = sizeof(ss_descriptors.source_comp), |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| }, |
| .sink = { |
| .bLength = sizeof(ss_descriptors.sink), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = 2 | USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = MAX_PACKET_SIZE_SS, |
| }, |
| .sink_comp = { |
| .bLength = sizeof(ss_descriptors.sink_comp), |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| }, |
| }; |
| |
| struct usb_ext_compat_desc os_desc_compat = { |
| .bFirstInterfaceNumber = 0, |
| .Reserved1 = cpu_to_le32(1), |
| .CompatibleID = {0}, |
| .SubCompatibleID = {0}, |
| .Reserved2 = {0}, |
| }; |
| |
| static struct usb_os_desc_header os_desc_header = { |
| .interface = cpu_to_le32(1), |
| .dwLength = cpu_to_le32(sizeof(os_desc_header) + sizeof(os_desc_compat)), |
| .bcdVersion = cpu_to_le32(1), |
| .wIndex = cpu_to_le32(4), |
| .bCount = cpu_to_le32(1), |
| .Reserved = cpu_to_le32(0), |
| }; |
| |
| |
| #define STR_INTERFACE_ "ADB Interface" |
| |
| static const struct { |
| struct usb_functionfs_strings_head header; |
| struct { |
| __le16 code; |
| const char str1[sizeof(STR_INTERFACE_)]; |
| } __attribute__((packed)) lang0; |
| } __attribute__((packed)) strings = { |
| .header = { |
| .magic = cpu_to_le32(FUNCTIONFS_STRINGS_MAGIC), |
| .length = cpu_to_le32(sizeof(strings)), |
| .str_count = cpu_to_le32(1), |
| .lang_count = cpu_to_le32(1), |
| }, |
| .lang0 = { |
| cpu_to_le16(0x0409), /* en-us */ |
| STR_INTERFACE_, |
| }, |
| }; |
| |
| static void usb_adb_open_thread(void* x) { |
| struct usb_handle *usb = (struct usb_handle *)x; |
| int fd; |
| |
| adb_thread_setname("usb open"); |
| |
| while (true) { |
| // wait until the USB device needs opening |
| adb_mutex_lock(&usb->lock); |
| while (!usb->open_new_connection) { |
| adb_cond_wait(&usb->notify, &usb->lock); |
| } |
| usb->open_new_connection = false; |
| adb_mutex_unlock(&usb->lock); |
| |
| D("[ usb_thread - opening device ]"); |
| do { |
| /* XXX use inotify? */ |
| fd = unix_open("/dev/android_adb", O_RDWR); |
| if (fd < 0) { |
| // to support older kernels |
| fd = unix_open("/dev/android", O_RDWR); |
| } |
| if (fd < 0) { |
| adb_sleep_ms(1000); |
| } |
| } while (fd < 0); |
| D("[ opening device succeeded ]"); |
| |
| close_on_exec(fd); |
| usb->fd = fd; |
| |
| D("[ usb_thread - registering device ]"); |
| register_usb_transport(usb, 0, 0, 1); |
| } |
| |
| // never gets here |
| abort(); |
| } |
| |
| static int usb_adb_write(usb_handle *h, const void *data, int len) |
| { |
| int n; |
| |
| D("about to write (fd=%d, len=%d)", h->fd, len); |
| n = unix_write(h->fd, data, len); |
| if(n != len) { |
| D("ERROR: fd = %d, n = %d, errno = %d (%s)", |
| h->fd, n, errno, strerror(errno)); |
| return -1; |
| } |
| if (h->kicked) { |
| D("usb_adb_write finished due to kicked"); |
| return -1; |
| } |
| D("[ done fd=%d ]", h->fd); |
| return 0; |
| } |
| |
| static int usb_adb_read(usb_handle *h, void *data, int len) |
| { |
| D("about to read (fd=%d, len=%d)", h->fd, len); |
| while (len > 0) { |
| // The kernel implementation of adb_read in f_adb.c doesn't support |
| // reads larger then 4096 bytes. Read the data in 4096 byte chunks to |
| // avoid the issue. (The ffs implementation doesn't have this limit.) |
| int bytes_to_read = len < 4096 ? len : 4096; |
| int n = unix_read(h->fd, data, bytes_to_read); |
| if (n != bytes_to_read) { |
| D("ERROR: fd = %d, n = %d, errno = %d (%s)", |
| h->fd, n, errno, strerror(errno)); |
| return -1; |
| } |
| if (h->kicked) { |
| D("usb_adb_read finished due to kicked"); |
| return -1; |
| } |
| len -= n; |
| data = ((char*)data) + n; |
| } |
| D("[ done fd=%d ]", h->fd); |
| return 0; |
| } |
| |
| static void usb_adb_kick(usb_handle *h) { |
| D("usb_kick"); |
| // Other threads may be calling usb_adb_read/usb_adb_write at the same time. |
| // If we close h->fd, the file descriptor will be reused to open other files, |
| // and the read/write thread may operate on the wrong file. So instead |
| // we set the kicked flag and reopen h->fd to a dummy file here. After read/write |
| // threads finish, we close h->fd in usb_adb_close(). |
| h->kicked = true; |
| TEMP_FAILURE_RETRY(dup2(dummy_fd, h->fd)); |
| } |
| |
| static void usb_adb_close(usb_handle *h) { |
| h->kicked = false; |
| adb_close(h->fd); |
| // Notify usb_adb_open_thread to open a new connection. |
| adb_mutex_lock(&h->lock); |
| h->open_new_connection = true; |
| adb_cond_signal(&h->notify); |
| adb_mutex_unlock(&h->lock); |
| } |
| |
| static void usb_adb_init() |
| { |
| usb_handle* h = reinterpret_cast<usb_handle*>(calloc(1, sizeof(usb_handle))); |
| if (h == nullptr) fatal("couldn't allocate usb_handle"); |
| |
| h->write = usb_adb_write; |
| h->read = usb_adb_read; |
| h->kick = usb_adb_kick; |
| h->close = usb_adb_close; |
| h->kicked = false; |
| h->fd = -1; |
| |
| h->open_new_connection = true; |
| adb_cond_init(&h->notify, 0); |
| adb_mutex_init(&h->lock, 0); |
| |
| // Open the file /dev/android_adb_enable to trigger |
| // the enabling of the adb USB function in the kernel. |
| // We never touch this file again - just leave it open |
| // indefinitely so the kernel will know when we are running |
| // and when we are not. |
| int fd = unix_open("/dev/android_adb_enable", O_RDWR); |
| if (fd < 0) { |
| D("failed to open /dev/android_adb_enable"); |
| } else { |
| close_on_exec(fd); |
| } |
| |
| D("[ usb_init - starting thread ]"); |
| if (!adb_thread_create(usb_adb_open_thread, h)) { |
| fatal_errno("cannot create usb thread"); |
| } |
| } |
| |
| |
| static bool init_functionfs(struct usb_handle *h) |
| { |
| ssize_t ret; |
| struct desc_v1 v1_descriptor; |
| struct desc_v2 v2_descriptor; |
| |
| v2_descriptor.header.magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2); |
| v2_descriptor.header.length = cpu_to_le32(sizeof(v2_descriptor)); |
| v2_descriptor.header.flags = FUNCTIONFS_HAS_FS_DESC | FUNCTIONFS_HAS_HS_DESC | |
| FUNCTIONFS_HAS_SS_DESC | FUNCTIONFS_HAS_MS_OS_DESC; |
| v2_descriptor.fs_count = 3; |
| v2_descriptor.hs_count = 3; |
| v2_descriptor.ss_count = 5; |
| v2_descriptor.os_count = 1; |
| v2_descriptor.fs_descs = fs_descriptors; |
| v2_descriptor.hs_descs = hs_descriptors; |
| v2_descriptor.ss_descs = ss_descriptors; |
| v2_descriptor.os_header = os_desc_header; |
| v2_descriptor.os_desc = os_desc_compat; |
| |
| if (h->control < 0) { // might have already done this before |
| D("OPENING %s", USB_FFS_ADB_EP0); |
| h->control = adb_open(USB_FFS_ADB_EP0, O_RDWR); |
| if (h->control < 0) { |
| D("[ %s: cannot open control endpoint: errno=%d]", USB_FFS_ADB_EP0, errno); |
| goto err; |
| } |
| |
| ret = adb_write(h->control, &v2_descriptor, sizeof(v2_descriptor)); |
| if (ret < 0) { |
| v1_descriptor.header.magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC); |
| v1_descriptor.header.length = cpu_to_le32(sizeof(v1_descriptor)); |
| v1_descriptor.header.fs_count = 3; |
| v1_descriptor.header.hs_count = 3; |
| v1_descriptor.fs_descs = fs_descriptors; |
| v1_descriptor.hs_descs = hs_descriptors; |
| D("[ %s: Switching to V1_descriptor format errno=%d ]", USB_FFS_ADB_EP0, errno); |
| ret = adb_write(h->control, &v1_descriptor, sizeof(v1_descriptor)); |
| if (ret < 0) { |
| D("[ %s: write descriptors failed: errno=%d ]", USB_FFS_ADB_EP0, errno); |
| goto err; |
| } |
| } |
| |
| ret = adb_write(h->control, &strings, sizeof(strings)); |
| if (ret < 0) { |
| D("[ %s: writing strings failed: errno=%d]", USB_FFS_ADB_EP0, errno); |
| goto err; |
| } |
| } |
| |
| h->bulk_out = adb_open(USB_FFS_ADB_OUT, O_RDWR); |
| if (h->bulk_out < 0) { |
| D("[ %s: cannot open bulk-out ep: errno=%d ]", USB_FFS_ADB_OUT, errno); |
| goto err; |
| } |
| |
| h->bulk_in = adb_open(USB_FFS_ADB_IN, O_RDWR); |
| if (h->bulk_in < 0) { |
| D("[ %s: cannot open bulk-in ep: errno=%d ]", USB_FFS_ADB_IN, errno); |
| goto err; |
| } |
| |
| return true; |
| |
| err: |
| if (h->bulk_in > 0) { |
| adb_close(h->bulk_in); |
| h->bulk_in = -1; |
| } |
| if (h->bulk_out > 0) { |
| adb_close(h->bulk_out); |
| h->bulk_out = -1; |
| } |
| if (h->control > 0) { |
| adb_close(h->control); |
| h->control = -1; |
| } |
| return false; |
| } |
| |
| static void usb_ffs_open_thread(void* x) { |
| struct usb_handle *usb = (struct usb_handle *)x; |
| |
| adb_thread_setname("usb ffs open"); |
| |
| while (true) { |
| // wait until the USB device needs opening |
| adb_mutex_lock(&usb->lock); |
| while (!usb->open_new_connection) { |
| adb_cond_wait(&usb->notify, &usb->lock); |
| } |
| usb->open_new_connection = false; |
| adb_mutex_unlock(&usb->lock); |
| |
| while (true) { |
| if (init_functionfs(usb)) { |
| break; |
| } |
| adb_sleep_ms(1000); |
| } |
| property_set("sys.usb.ffs.ready", "1"); |
| |
| D("[ usb_thread - registering device ]"); |
| register_usb_transport(usb, 0, 0, 1); |
| } |
| |
| // never gets here |
| abort(); |
| } |
| |
| static int usb_ffs_write(usb_handle* h, const void* data, int len) { |
| D("about to write (fd=%d, len=%d)", h->bulk_in, len); |
| |
| const char* buf = static_cast<const char*>(data); |
| while (len > 0) { |
| int write_len = std::min(USB_FFS_MAX_WRITE, len); |
| int n = adb_write(h->bulk_in, buf, write_len); |
| if (n < 0) { |
| D("ERROR: fd = %d, n = %d: %s", h->bulk_in, n, strerror(errno)); |
| return -1; |
| } |
| buf += n; |
| len -= n; |
| } |
| |
| D("[ done fd=%d ]", h->bulk_in); |
| return 0; |
| } |
| |
| static int usb_ffs_read(usb_handle* h, void* data, int len) { |
| D("about to read (fd=%d, len=%d)", h->bulk_out, len); |
| |
| char* buf = static_cast<char*>(data); |
| while (len > 0) { |
| int read_len = std::min(USB_FFS_MAX_READ, len); |
| int n = adb_read(h->bulk_out, buf, read_len); |
| if (n < 0) { |
| D("ERROR: fd = %d, n = %d: %s", h->bulk_out, n, strerror(errno)); |
| return -1; |
| } |
| buf += n; |
| len -= n; |
| } |
| |
| D("[ done fd=%d ]", h->bulk_out); |
| return 0; |
| } |
| |
| static void usb_ffs_kick(usb_handle *h) |
| { |
| int err; |
| |
| err = ioctl(h->bulk_in, FUNCTIONFS_CLEAR_HALT); |
| if (err < 0) { |
| D("[ kick: source (fd=%d) clear halt failed (%d) ]", h->bulk_in, errno); |
| } |
| |
| err = ioctl(h->bulk_out, FUNCTIONFS_CLEAR_HALT); |
| if (err < 0) { |
| D("[ kick: sink (fd=%d) clear halt failed (%d) ]", h->bulk_out, errno); |
| } |
| |
| // don't close ep0 here, since we may not need to reinitialize it with |
| // the same descriptors again. if however ep1/ep2 fail to re-open in |
| // init_functionfs, only then would we close and open ep0 again. |
| // Ditto the comment in usb_adb_kick. |
| h->kicked = true; |
| TEMP_FAILURE_RETRY(dup2(dummy_fd, h->bulk_out)); |
| TEMP_FAILURE_RETRY(dup2(dummy_fd, h->bulk_in)); |
| } |
| |
| static void usb_ffs_close(usb_handle *h) { |
| h->kicked = false; |
| adb_close(h->bulk_out); |
| adb_close(h->bulk_in); |
| // Notify usb_adb_open_thread to open a new connection. |
| adb_mutex_lock(&h->lock); |
| h->open_new_connection = true; |
| adb_cond_signal(&h->notify); |
| adb_mutex_unlock(&h->lock); |
| } |
| |
| static void usb_ffs_init() |
| { |
| D("[ usb_init - using FunctionFS ]"); |
| |
| usb_handle* h = reinterpret_cast<usb_handle*>(calloc(1, sizeof(usb_handle))); |
| if (h == nullptr) fatal("couldn't allocate usb_handle"); |
| |
| h->write = usb_ffs_write; |
| h->read = usb_ffs_read; |
| h->kick = usb_ffs_kick; |
| h->close = usb_ffs_close; |
| h->kicked = false; |
| h->control = -1; |
| h->bulk_out = -1; |
| h->bulk_out = -1; |
| |
| h->open_new_connection = true; |
| adb_cond_init(&h->notify, 0); |
| adb_mutex_init(&h->lock, 0); |
| |
| D("[ usb_init - starting thread ]"); |
| if (!adb_thread_create(usb_ffs_open_thread, h)) { |
| fatal_errno("[ cannot create usb thread ]\n"); |
| } |
| } |
| |
| void usb_init() |
| { |
| dummy_fd = adb_open("/dev/null", O_WRONLY); |
| CHECK_NE(dummy_fd, -1); |
| if (access(USB_FFS_ADB_EP0, F_OK) == 0) |
| usb_ffs_init(); |
| else |
| usb_adb_init(); |
| } |
| |
| int usb_write(usb_handle *h, const void *data, int len) |
| { |
| return h->write(h, data, len); |
| } |
| |
| int usb_read(usb_handle *h, void *data, int len) |
| { |
| return h->read(h, data, len); |
| } |
| int usb_close(usb_handle *h) |
| { |
| h->close(h); |
| return 0; |
| } |
| |
| void usb_kick(usb_handle *h) |
| { |
| h->kick(h); |
| } |