| /* libs/pixelflinger/codeflinger/load_store.cpp |
| ** |
| ** Copyright 2006, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| |
| #include <assert.h> |
| #include <stdio.h> |
| #include <cutils/log.h> |
| #include "GGLAssembler.h" |
| |
| namespace android { |
| |
| // ---------------------------------------------------------------------------- |
| |
| void GGLAssembler::store(const pointer_t& addr, const pixel_t& s, uint32_t flags) |
| { |
| const int bits = addr.size; |
| const int inc = (flags & WRITE_BACK)?1:0; |
| switch (bits) { |
| case 32: |
| if (inc) STR(AL, s.reg, addr.reg, immed12_post(4)); |
| else STR(AL, s.reg, addr.reg); |
| break; |
| case 24: |
| // 24 bits formats are a little special and used only for RGB |
| // 0x00BBGGRR is unpacked as R,G,B |
| STRB(AL, s.reg, addr.reg, immed12_pre(0)); |
| MOV(AL, 0, s.reg, reg_imm(s.reg, ROR, 8)); |
| STRB(AL, s.reg, addr.reg, immed12_pre(1)); |
| MOV(AL, 0, s.reg, reg_imm(s.reg, ROR, 8)); |
| STRB(AL, s.reg, addr.reg, immed12_pre(2)); |
| if (!(s.flags & CORRUPTIBLE)) { |
| MOV(AL, 0, s.reg, reg_imm(s.reg, ROR, 16)); |
| } |
| if (inc) |
| ADD(AL, 0, addr.reg, addr.reg, imm(3)); |
| break; |
| case 16: |
| if (inc) STRH(AL, s.reg, addr.reg, immed8_post(2)); |
| else STRH(AL, s.reg, addr.reg); |
| break; |
| case 8: |
| if (inc) STRB(AL, s.reg, addr.reg, immed12_post(1)); |
| else STRB(AL, s.reg, addr.reg); |
| break; |
| } |
| } |
| |
| void GGLAssembler::load(const pointer_t& addr, const pixel_t& s, uint32_t flags) |
| { |
| Scratch scratches(registerFile()); |
| int s0; |
| |
| const int bits = addr.size; |
| const int inc = (flags & WRITE_BACK)?1:0; |
| switch (bits) { |
| case 32: |
| if (inc) LDR(AL, s.reg, addr.reg, immed12_post(4)); |
| else LDR(AL, s.reg, addr.reg); |
| break; |
| case 24: |
| // 24 bits formats are a little special and used only for RGB |
| // R,G,B is packed as 0x00BBGGRR |
| s0 = scratches.obtain(); |
| if (s.reg != addr.reg) { |
| LDRB(AL, s.reg, addr.reg, immed12_pre(0)); // R |
| LDRB(AL, s0, addr.reg, immed12_pre(1)); // G |
| ORR(AL, 0, s.reg, s.reg, reg_imm(s0, LSL, 8)); |
| LDRB(AL, s0, addr.reg, immed12_pre(2)); // B |
| ORR(AL, 0, s.reg, s.reg, reg_imm(s0, LSL, 16)); |
| } else { |
| int s1 = scratches.obtain(); |
| LDRB(AL, s1, addr.reg, immed12_pre(0)); // R |
| LDRB(AL, s0, addr.reg, immed12_pre(1)); // G |
| ORR(AL, 0, s1, s1, reg_imm(s0, LSL, 8)); |
| LDRB(AL, s0, addr.reg, immed12_pre(2)); // B |
| ORR(AL, 0, s.reg, s1, reg_imm(s0, LSL, 16)); |
| } |
| if (inc) |
| ADD(AL, 0, addr.reg, addr.reg, imm(3)); |
| break; |
| case 16: |
| if (inc) LDRH(AL, s.reg, addr.reg, immed8_post(2)); |
| else LDRH(AL, s.reg, addr.reg); |
| break; |
| case 8: |
| if (inc) LDRB(AL, s.reg, addr.reg, immed12_post(1)); |
| else LDRB(AL, s.reg, addr.reg); |
| break; |
| } |
| } |
| |
| void GGLAssembler::extract(integer_t& d, int s, int h, int l, int bits) |
| { |
| const int maskLen = h-l; |
| |
| #ifdef __mips__ |
| assert(maskLen<=11); |
| #else |
| assert(maskLen<=8); |
| #endif |
| assert(h); |
| |
| if (h != bits) { |
| const int mask = ((1<<maskLen)-1) << l; |
| if (isValidImmediate(mask)) { |
| AND(AL, 0, d.reg, s, imm(mask)); // component = packed & mask; |
| } else if (isValidImmediate(~mask)) { |
| BIC(AL, 0, d.reg, s, imm(~mask)); // component = packed & mask; |
| } else { |
| MOV(AL, 0, d.reg, reg_imm(s, LSL, 32-h)); |
| l += 32-h; |
| h = 32; |
| } |
| s = d.reg; |
| } |
| |
| if (l) { |
| MOV(AL, 0, d.reg, reg_imm(s, LSR, l)); // component = packed >> l; |
| s = d.reg; |
| } |
| |
| if (s != d.reg) { |
| MOV(AL, 0, d.reg, s); |
| } |
| |
| d.s = maskLen; |
| } |
| |
| void GGLAssembler::extract(integer_t& d, const pixel_t& s, int component) |
| { |
| extract(d, s.reg, |
| s.format.c[component].h, |
| s.format.c[component].l, |
| s.size()); |
| } |
| |
| void GGLAssembler::extract(component_t& d, const pixel_t& s, int component) |
| { |
| integer_t r(d.reg, 32, d.flags); |
| extract(r, s.reg, |
| s.format.c[component].h, |
| s.format.c[component].l, |
| s.size()); |
| d = component_t(r); |
| } |
| |
| |
| void GGLAssembler::expand(integer_t& d, const component_t& s, int dbits) |
| { |
| if (s.l || (s.flags & CLEAR_HI)) { |
| extract(d, s.reg, s.h, s.l, 32); |
| expand(d, d, dbits); |
| } else { |
| expand(d, integer_t(s.reg, s.size(), s.flags), dbits); |
| } |
| } |
| |
| void GGLAssembler::expand(component_t& d, const component_t& s, int dbits) |
| { |
| integer_t r(d.reg, 32, d.flags); |
| expand(r, s, dbits); |
| d = component_t(r); |
| } |
| |
| void GGLAssembler::expand(integer_t& dst, const integer_t& src, int dbits) |
| { |
| assert(src.size()); |
| |
| int sbits = src.size(); |
| int s = src.reg; |
| int d = dst.reg; |
| |
| // be sure to set 'dst' after we read 'src' as they may be identical |
| dst.s = dbits; |
| dst.flags = 0; |
| |
| if (dbits<=sbits) { |
| if (s != d) { |
| MOV(AL, 0, d, s); |
| } |
| return; |
| } |
| |
| if (sbits == 1) { |
| RSB(AL, 0, d, s, reg_imm(s, LSL, dbits)); |
| // d = (s<<dbits) - s; |
| return; |
| } |
| |
| if (dbits % sbits) { |
| MOV(AL, 0, d, reg_imm(s, LSL, dbits-sbits)); |
| // d = s << (dbits-sbits); |
| dbits -= sbits; |
| do { |
| ORR(AL, 0, d, d, reg_imm(d, LSR, sbits)); |
| // d |= d >> sbits; |
| dbits -= sbits; |
| sbits *= 2; |
| } while(dbits>0); |
| return; |
| } |
| |
| dbits -= sbits; |
| do { |
| ORR(AL, 0, d, s, reg_imm(s, LSL, sbits)); |
| // d |= d<<sbits; |
| s = d; |
| dbits -= sbits; |
| if (sbits*2 < dbits) { |
| sbits *= 2; |
| } |
| } while(dbits>0); |
| } |
| |
| void GGLAssembler::downshift( |
| pixel_t& d, int component, component_t s, const reg_t& dither) |
| { |
| const needs_t& needs = mBuilderContext.needs; |
| Scratch scratches(registerFile()); |
| |
| int sh = s.h; |
| int sl = s.l; |
| int maskHiBits = (sh!=32) ? ((s.flags & CLEAR_HI)?1:0) : 0; |
| int maskLoBits = (sl!=0) ? ((s.flags & CLEAR_LO)?1:0) : 0; |
| int sbits = sh - sl; |
| |
| int dh = d.format.c[component].h; |
| int dl = d.format.c[component].l; |
| int dbits = dh - dl; |
| int dithering = 0; |
| |
| ALOGE_IF(sbits<dbits, "sbits (%d) < dbits (%d) in downshift", sbits, dbits); |
| |
| if (sbits>dbits) { |
| // see if we need to dither |
| dithering = mDithering; |
| } |
| |
| int ireg = d.reg; |
| if (!(d.flags & FIRST)) { |
| if (s.flags & CORRUPTIBLE) { |
| ireg = s.reg; |
| } else { |
| ireg = scratches.obtain(); |
| } |
| } |
| d.flags &= ~FIRST; |
| |
| if (maskHiBits) { |
| // we need to mask the high bits (and possibly the lowbits too) |
| // and we might be able to use immediate mask. |
| if (!dithering) { |
| // we don't do this if we only have maskLoBits because we can |
| // do it more efficiently below (in the case where dl=0) |
| const int offset = sh - dbits; |
| if (dbits<=8 && offset >= 0) { |
| const uint32_t mask = ((1<<dbits)-1) << offset; |
| if (isValidImmediate(mask) || isValidImmediate(~mask)) { |
| build_and_immediate(ireg, s.reg, mask, 32); |
| sl = offset; |
| s.reg = ireg; |
| sbits = dbits; |
| maskLoBits = maskHiBits = 0; |
| } |
| } |
| } else { |
| // in the dithering case though, we need to preserve the lower bits |
| const uint32_t mask = ((1<<sbits)-1) << sl; |
| if (isValidImmediate(mask) || isValidImmediate(~mask)) { |
| build_and_immediate(ireg, s.reg, mask, 32); |
| s.reg = ireg; |
| maskLoBits = maskHiBits = 0; |
| } |
| } |
| } |
| |
| // XXX: we could special case (maskHiBits & !maskLoBits) |
| // like we do for maskLoBits below, but it happens very rarely |
| // that we have maskHiBits only and the conditions necessary to lead |
| // to better code (like doing d |= s << 24) |
| |
| if (maskHiBits) { |
| MOV(AL, 0, ireg, reg_imm(s.reg, LSL, 32-sh)); |
| sl += 32-sh; |
| sh = 32; |
| s.reg = ireg; |
| maskHiBits = 0; |
| } |
| |
| // Downsampling should be performed as follows: |
| // V * ((1<<dbits)-1) / ((1<<sbits)-1) |
| // V * [(1<<dbits)/((1<<sbits)-1) - 1/((1<<sbits)-1)] |
| // V * [1/((1<<sbits)-1)>>dbits - 1/((1<<sbits)-1)] |
| // V/((1<<(sbits-dbits))-(1>>dbits)) - (V>>sbits)/((1<<sbits)-1)>>sbits |
| // V/((1<<(sbits-dbits))-(1>>dbits)) - (V>>sbits)/(1-(1>>sbits)) |
| // |
| // By approximating (1>>dbits) and (1>>sbits) to 0: |
| // |
| // V>>(sbits-dbits) - V>>sbits |
| // |
| // A good approximation is V>>(sbits-dbits), |
| // but better one (needed for dithering) is: |
| // |
| // (V>>(sbits-dbits)<<sbits - V)>>sbits |
| // (V<<dbits - V)>>sbits |
| // (V - V>>dbits)>>(sbits-dbits) |
| |
| // Dithering is done here |
| if (dithering) { |
| comment("dithering"); |
| if (sl) { |
| MOV(AL, 0, ireg, reg_imm(s.reg, LSR, sl)); |
| sh -= sl; |
| sl = 0; |
| s.reg = ireg; |
| } |
| // scaling (V-V>>dbits) |
| SUB(AL, 0, ireg, s.reg, reg_imm(s.reg, LSR, dbits)); |
| const int shift = (GGL_DITHER_BITS - (sbits-dbits)); |
| if (shift>0) ADD(AL, 0, ireg, ireg, reg_imm(dither.reg, LSR, shift)); |
| else if (shift<0) ADD(AL, 0, ireg, ireg, reg_imm(dither.reg, LSL,-shift)); |
| else ADD(AL, 0, ireg, ireg, dither.reg); |
| s.reg = ireg; |
| } |
| |
| if ((maskLoBits|dithering) && (sh > dbits)) { |
| int shift = sh-dbits; |
| if (dl) { |
| MOV(AL, 0, ireg, reg_imm(s.reg, LSR, shift)); |
| if (ireg == d.reg) { |
| MOV(AL, 0, d.reg, reg_imm(ireg, LSL, dl)); |
| } else { |
| ORR(AL, 0, d.reg, d.reg, reg_imm(ireg, LSL, dl)); |
| } |
| } else { |
| if (ireg == d.reg) { |
| MOV(AL, 0, d.reg, reg_imm(s.reg, LSR, shift)); |
| } else { |
| ORR(AL, 0, d.reg, d.reg, reg_imm(s.reg, LSR, shift)); |
| } |
| } |
| } else { |
| int shift = sh-dh; |
| if (shift>0) { |
| if (ireg == d.reg) { |
| MOV(AL, 0, d.reg, reg_imm(s.reg, LSR, shift)); |
| } else { |
| ORR(AL, 0, d.reg, d.reg, reg_imm(s.reg, LSR, shift)); |
| } |
| } else if (shift<0) { |
| if (ireg == d.reg) { |
| MOV(AL, 0, d.reg, reg_imm(s.reg, LSL, -shift)); |
| } else { |
| ORR(AL, 0, d.reg, d.reg, reg_imm(s.reg, LSL, -shift)); |
| } |
| } else { |
| if (ireg == d.reg) { |
| if (s.reg != d.reg) { |
| MOV(AL, 0, d.reg, s.reg); |
| } |
| } else { |
| ORR(AL, 0, d.reg, d.reg, s.reg); |
| } |
| } |
| } |
| } |
| |
| }; // namespace android |