| /* libs/pixelflinger/codeflinger/MIPSAssembler.h |
| ** |
| ** Copyright 2012, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| |
| #ifndef ANDROID_MIPSASSEMBLER_H |
| #define ANDROID_MIPSASSEMBLER_H |
| |
| #include <stdint.h> |
| #include <sys/types.h> |
| |
| #include "tinyutils/KeyedVector.h" |
| #include "tinyutils/Vector.h" |
| #include "tinyutils/smartpointer.h" |
| |
| #include "ARMAssemblerInterface.h" |
| #include "CodeCache.h" |
| |
| namespace android { |
| |
| class MIPSAssembler; // forward reference |
| |
| // this class mimics ARMAssembler interface |
| // intent is to translate each ARM instruction to 1 or more MIPS instr |
| // implementation calls MIPSAssembler class to generate mips code |
| class ArmToMipsAssembler : public ARMAssemblerInterface |
| { |
| public: |
| ArmToMipsAssembler(const sp<Assembly>& assembly, |
| char *abuf = 0, int linesz = 0, int instr_count = 0); |
| virtual ~ArmToMipsAssembler(); |
| |
| uint32_t* base() const; |
| uint32_t* pc() const; |
| void disassemble(const char* name); |
| |
| virtual void reset(); |
| |
| virtual int generate(const char* name); |
| virtual int getCodegenArch(); |
| |
| virtual void prolog(); |
| virtual void epilog(uint32_t touched); |
| virtual void comment(const char* string); |
| |
| |
| // ----------------------------------------------------------------------- |
| // shifters and addressing modes |
| // ----------------------------------------------------------------------- |
| |
| // shifters... |
| virtual bool isValidImmediate(uint32_t immed); |
| virtual int buildImmediate(uint32_t i, uint32_t& rot, uint32_t& imm); |
| |
| virtual uint32_t imm(uint32_t immediate); |
| virtual uint32_t reg_imm(int Rm, int type, uint32_t shift); |
| virtual uint32_t reg_rrx(int Rm); |
| virtual uint32_t reg_reg(int Rm, int type, int Rs); |
| |
| // addressing modes... |
| // LDR(B)/STR(B)/PLD |
| // (immediate and Rm can be negative, which indicates U=0) |
| virtual uint32_t immed12_pre(int32_t immed12, int W=0); |
| virtual uint32_t immed12_post(int32_t immed12); |
| virtual uint32_t reg_scale_pre(int Rm, int type=0, uint32_t shift=0, int W=0); |
| virtual uint32_t reg_scale_post(int Rm, int type=0, uint32_t shift=0); |
| |
| // LDRH/LDRSB/LDRSH/STRH |
| // (immediate and Rm can be negative, which indicates U=0) |
| virtual uint32_t immed8_pre(int32_t immed8, int W=0); |
| virtual uint32_t immed8_post(int32_t immed8); |
| virtual uint32_t reg_pre(int Rm, int W=0); |
| virtual uint32_t reg_post(int Rm); |
| |
| |
| |
| |
| virtual void dataProcessing(int opcode, int cc, int s, |
| int Rd, int Rn, |
| uint32_t Op2); |
| virtual void MLA(int cc, int s, |
| int Rd, int Rm, int Rs, int Rn); |
| virtual void MUL(int cc, int s, |
| int Rd, int Rm, int Rs); |
| virtual void UMULL(int cc, int s, |
| int RdLo, int RdHi, int Rm, int Rs); |
| virtual void UMUAL(int cc, int s, |
| int RdLo, int RdHi, int Rm, int Rs); |
| virtual void SMULL(int cc, int s, |
| int RdLo, int RdHi, int Rm, int Rs); |
| virtual void SMUAL(int cc, int s, |
| int RdLo, int RdHi, int Rm, int Rs); |
| |
| virtual void B(int cc, uint32_t* pc); |
| virtual void BL(int cc, uint32_t* pc); |
| virtual void BX(int cc, int Rn); |
| virtual void label(const char* theLabel); |
| virtual void B(int cc, const char* label); |
| virtual void BL(int cc, const char* label); |
| |
| virtual uint32_t* pcForLabel(const char* label); |
| |
| virtual void LDR (int cc, int Rd, |
| int Rn, uint32_t offset = 0); |
| virtual void LDRB(int cc, int Rd, |
| int Rn, uint32_t offset = 0); |
| virtual void STR (int cc, int Rd, |
| int Rn, uint32_t offset = 0); |
| virtual void STRB(int cc, int Rd, |
| int Rn, uint32_t offset = 0); |
| virtual void LDRH (int cc, int Rd, |
| int Rn, uint32_t offset = 0); |
| virtual void LDRSB(int cc, int Rd, |
| int Rn, uint32_t offset = 0); |
| virtual void LDRSH(int cc, int Rd, |
| int Rn, uint32_t offset = 0); |
| virtual void STRH (int cc, int Rd, |
| int Rn, uint32_t offset = 0); |
| |
| virtual void LDM(int cc, int dir, |
| int Rn, int W, uint32_t reg_list); |
| virtual void STM(int cc, int dir, |
| int Rn, int W, uint32_t reg_list); |
| |
| virtual void SWP(int cc, int Rn, int Rd, int Rm); |
| virtual void SWPB(int cc, int Rn, int Rd, int Rm); |
| virtual void SWI(int cc, uint32_t comment); |
| |
| virtual void PLD(int Rn, uint32_t offset); |
| virtual void CLZ(int cc, int Rd, int Rm); |
| virtual void QADD(int cc, int Rd, int Rm, int Rn); |
| virtual void QDADD(int cc, int Rd, int Rm, int Rn); |
| virtual void QSUB(int cc, int Rd, int Rm, int Rn); |
| virtual void QDSUB(int cc, int Rd, int Rm, int Rn); |
| virtual void SMUL(int cc, int xy, |
| int Rd, int Rm, int Rs); |
| virtual void SMULW(int cc, int y, |
| int Rd, int Rm, int Rs); |
| virtual void SMLA(int cc, int xy, |
| int Rd, int Rm, int Rs, int Rn); |
| virtual void SMLAL(int cc, int xy, |
| int RdHi, int RdLo, int Rs, int Rm); |
| virtual void SMLAW(int cc, int y, |
| int Rd, int Rm, int Rs, int Rn); |
| |
| // byte/half word extract... |
| virtual void UXTB16(int cc, int Rd, int Rm, int rotate); |
| |
| // bit manipulation... |
| virtual void UBFX(int cc, int Rd, int Rn, int lsb, int width); |
| |
| // this is some crap to share is MIPSAssembler class for debug |
| char * mArmDisassemblyBuffer; |
| int mArmLineLength; |
| int mArmInstrCount; |
| |
| int mInum; // current arm instuction number (0..n) |
| uint32_t** mArmPC; // array: PC for 1st mips instr of |
| // each translated ARM instr |
| |
| |
| private: |
| ArmToMipsAssembler(const ArmToMipsAssembler& rhs); |
| ArmToMipsAssembler& operator = (const ArmToMipsAssembler& rhs); |
| |
| void init_conditional_labels(void); |
| |
| void protectConditionalOperands(int Rd); |
| |
| // reg__tmp set to MIPS AT, reg 1 |
| int dataProcAdrModes(int op, int& source, bool sign = false, int reg_tmp = 1); |
| |
| sp<Assembly> mAssembly; |
| MIPSAssembler* mMips; |
| |
| |
| enum misc_constants_t { |
| ARM_MAX_INSTUCTIONS = 512 // based on ASSEMBLY_SCRATCH_SIZE |
| }; |
| |
| enum { |
| SRC_REG = 0, |
| SRC_IMM, |
| SRC_ERROR = -1 |
| }; |
| |
| enum addr_modes { |
| // start above the range of legal mips reg #'s (0-31) |
| AMODE_REG = 0x20, |
| AMODE_IMM, AMODE_REG_IMM, // for data processing |
| AMODE_IMM_12_PRE, AMODE_IMM_12_POST, // for load/store |
| AMODE_REG_SCALE_PRE, AMODE_IMM_8_PRE, |
| AMODE_IMM_8_POST, AMODE_REG_PRE, |
| AMODE_UNSUPPORTED |
| }; |
| |
| struct addr_mode_t { // address modes for current ARM instruction |
| int reg; |
| int stype; |
| uint32_t value; |
| bool writeback; // writeback the adr reg after modification |
| } amode; |
| |
| enum cond_types { |
| CMP_COND = 1, |
| SBIT_COND |
| }; |
| |
| struct cond_mode_t { // conditional-execution info for current ARM instruction |
| cond_types type; |
| int r1; |
| int r2; |
| int labelnum; |
| char label[100][10]; |
| } cond; |
| |
| }; |
| |
| |
| |
| |
| // ---------------------------------------------------------------------------- |
| // ---------------------------------------------------------------------------- |
| // ---------------------------------------------------------------------------- |
| |
| // This is the basic MIPS assembler, which just creates the opcodes in memory. |
| // All the more complicated work is done in ArmToMipsAssember above. |
| |
| class MIPSAssembler |
| { |
| public: |
| MIPSAssembler(const sp<Assembly>& assembly, ArmToMipsAssembler *parent); |
| virtual ~MIPSAssembler(); |
| |
| uint32_t* base() const; |
| uint32_t* pc() const; |
| void reset(); |
| |
| void disassemble(const char* name); |
| |
| void prolog(); |
| void epilog(uint32_t touched); |
| int generate(const char* name); |
| void comment(const char* string); |
| void label(const char* string); |
| |
| // valid only after generate() has been called |
| uint32_t* pcForLabel(const char* label); |
| |
| |
| // ------------------------------------------------------------------------ |
| // MIPSAssemblerInterface... |
| // ------------------------------------------------------------------------ |
| |
| #if 0 |
| #pragma mark - |
| #pragma mark Arithmetic... |
| #endif |
| |
| void ADDU(int Rd, int Rs, int Rt); |
| void ADDIU(int Rt, int Rs, int16_t imm); |
| void SUBU(int Rd, int Rs, int Rt); |
| void SUBIU(int Rt, int Rs, int16_t imm); |
| void NEGU(int Rd, int Rs); |
| void MUL(int Rd, int Rs, int Rt); |
| void MULT(int Rs, int Rt); // dest is hi,lo |
| void MULTU(int Rs, int Rt); // dest is hi,lo |
| void MADD(int Rs, int Rt); // hi,lo = hi,lo + Rs * Rt |
| void MADDU(int Rs, int Rt); // hi,lo = hi,lo + Rs * Rt |
| void MSUB(int Rs, int Rt); // hi,lo = hi,lo - Rs * Rt |
| void MSUBU(int Rs, int Rt); // hi,lo = hi,lo - Rs * Rt |
| void SEB(int Rd, int Rt); // sign-extend byte (mips32r2) |
| void SEH(int Rd, int Rt); // sign-extend half-word (mips32r2) |
| |
| |
| #if 0 |
| #pragma mark - |
| #pragma mark Comparisons... |
| #endif |
| |
| void SLT(int Rd, int Rs, int Rt); |
| void SLTI(int Rt, int Rs, int16_t imm); |
| void SLTU(int Rd, int Rs, int Rt); |
| void SLTIU(int Rt, int Rs, int16_t imm); |
| |
| |
| #if 0 |
| #pragma mark - |
| #pragma mark Logical... |
| #endif |
| |
| void AND(int Rd, int Rs, int Rt); |
| void ANDI(int Rd, int Rs, uint16_t imm); |
| void OR(int Rd, int Rs, int Rt); |
| void ORI(int Rt, int Rs, uint16_t imm); |
| void NOR(int Rd, int Rs, int Rt); |
| void NOT(int Rd, int Rs); |
| void XOR(int Rd, int Rs, int Rt); |
| void XORI(int Rt, int Rs, uint16_t imm); |
| |
| void SLL(int Rd, int Rt, int shft); |
| void SLLV(int Rd, int Rt, int Rs); |
| void SRL(int Rd, int Rt, int shft); |
| void SRLV(int Rd, int Rt, int Rs); |
| void SRA(int Rd, int Rt, int shft); |
| void SRAV(int Rd, int Rt, int Rs); |
| void ROTR(int Rd, int Rt, int shft); // mips32r2 |
| void ROTRV(int Rd, int Rt, int Rs); // mips32r2 |
| void RORsyn(int Rd, int Rs, int Rt); // synthetic: d = s rotated by t |
| void RORIsyn(int Rd, int Rt, int rot); // synthetic: d = s rotated by immed |
| |
| void CLO(int Rd, int Rs); |
| void CLZ(int Rd, int Rs); |
| void WSBH(int Rd, int Rt); |
| |
| |
| #if 0 |
| #pragma mark - |
| #pragma mark Load/store... |
| #endif |
| |
| void LW(int Rt, int Rbase, int16_t offset); |
| void SW(int Rt, int Rbase, int16_t offset); |
| void LB(int Rt, int Rbase, int16_t offset); |
| void LBU(int Rt, int Rbase, int16_t offset); |
| void SB(int Rt, int Rbase, int16_t offset); |
| void LH(int Rt, int Rbase, int16_t offset); |
| void LHU(int Rt, int Rbase, int16_t offset); |
| void SH(int Rt, int Rbase, int16_t offset); |
| void LUI(int Rt, int16_t offset); |
| |
| #if 0 |
| #pragma mark - |
| #pragma mark Register moves... |
| #endif |
| |
| void MOVE(int Rd, int Rs); |
| void MOVN(int Rd, int Rs, int Rt); |
| void MOVZ(int Rd, int Rs, int Rt); |
| void MFHI(int Rd); |
| void MFLO(int Rd); |
| void MTHI(int Rs); |
| void MTLO(int Rs); |
| |
| #if 0 |
| #pragma mark - |
| #pragma mark Branch... |
| #endif |
| |
| void B(const char* label); |
| void BEQ(int Rs, int Rt, const char* label); |
| void BNE(int Rs, int Rt, const char* label); |
| void BGEZ(int Rs, const char* label); |
| void BGTZ(int Rs, const char* label); |
| void BLEZ(int Rs, const char* label); |
| void BLTZ(int Rs, const char* label); |
| void JR(int Rs); |
| |
| |
| #if 0 |
| #pragma mark - |
| #pragma mark Synthesized Branch... |
| #endif |
| |
| // synthetic variants of above (using slt & friends) |
| void BEQZ(int Rs, const char* label); |
| void BNEZ(int Rs, const char* label); |
| void BGE(int Rs, int Rt, const char* label); |
| void BGEU(int Rs, int Rt, const char* label); |
| void BGT(int Rs, int Rt, const char* label); |
| void BGTU(int Rs, int Rt, const char* label); |
| void BLE(int Rs, int Rt, const char* label); |
| void BLEU(int Rs, int Rt, const char* label); |
| void BLT(int Rs, int Rt, const char* label); |
| void BLTU(int Rs, int Rt, const char* label); |
| |
| #if 0 |
| #pragma mark - |
| #pragma mark Misc... |
| #endif |
| |
| void NOP(void); |
| void NOP2(void); |
| void UNIMPL(void); |
| |
| |
| |
| |
| |
| private: |
| void string_detab(char *s); |
| void string_pad(char *s, int padded_len); |
| |
| ArmToMipsAssembler *mParent; |
| sp<Assembly> mAssembly; |
| uint32_t* mBase; |
| uint32_t* mPC; |
| uint32_t* mPrologPC; |
| int64_t mDuration; |
| #if defined(WITH_LIB_HARDWARE) |
| bool mQemuTracing; |
| #endif |
| |
| struct branch_target_t { |
| inline branch_target_t() : label(0), pc(0) { } |
| inline branch_target_t(const char* l, uint32_t* p) |
| : label(l), pc(p) { } |
| const char* label; |
| uint32_t* pc; |
| }; |
| |
| Vector<branch_target_t> mBranchTargets; |
| KeyedVector< const char*, uint32_t* > mLabels; |
| KeyedVector< uint32_t*, const char* > mLabelsInverseMapping; |
| KeyedVector< uint32_t*, const char* > mComments; |
| |
| |
| |
| |
| // opcode field of all instructions |
| enum opcode_field { |
| spec_op, regimm_op, j_op, jal_op, // 00 |
| beq_op, bne_op, blez_op, bgtz_op, |
| addi_op, addiu_op, slti_op, sltiu_op, // 08 |
| andi_op, ori_op, xori_op, lui_op, |
| cop0_op, cop1_op, cop2_op, cop1x_op, // 10 |
| beql_op, bnel_op, blezl_op, bgtzl_op, |
| daddi_op, daddiu_op, ldl_op, ldr_op, // 18 |
| spec2_op, jalx_op, mdmx_op, spec3_op, |
| lb_op, lh_op, lwl_op, lw_op, // 20 |
| lbu_op, lhu_op, lwr_op, lwu_op, |
| sb_op, sh_op, swl_op, sw_op, // 28 |
| sdl_op, sdr_op, swr_op, cache_op, |
| ll_op, lwc1_op, lwc2_op, pref_op, // 30 |
| lld_op, ldc1_op, ldc2_op, ld_op, |
| sc_op, swc1_op, swc2_op, rsrv_3b_op, // 38 |
| scd_op, sdc1_op, sdc2_op, sd_op |
| }; |
| |
| |
| // func field for special opcode |
| enum func_spec_op { |
| sll_fn, movc_fn, srl_fn, sra_fn, // 00 |
| sllv_fn, pmon_fn, srlv_fn, srav_fn, |
| jr_fn, jalr_fn, movz_fn, movn_fn, // 08 |
| syscall_fn, break_fn, spim_fn, sync_fn, |
| mfhi_fn, mthi_fn, mflo_fn, mtlo_fn, // 10 |
| dsllv_fn, rsrv_spec_2, dsrlv_fn, dsrav_fn, |
| mult_fn, multu_fn, div_fn, divu_fn, // 18 |
| dmult_fn, dmultu_fn, ddiv_fn, ddivu_fn, |
| add_fn, addu_fn, sub_fn, subu_fn, // 20 |
| and_fn, or_fn, xor_fn, nor_fn, |
| rsrv_spec_3, rsrv_spec_4, slt_fn, sltu_fn, // 28 |
| dadd_fn, daddu_fn, dsub_fn, dsubu_fn, |
| tge_fn, tgeu_fn, tlt_fn, tltu_fn, // 30 |
| teq_fn, rsrv_spec_5, tne_fn, rsrv_spec_6, |
| dsll_fn, rsrv_spec_7, dsrl_fn, dsra_fn, // 38 |
| dsll32_fn, rsrv_spec_8, dsrl32_fn, dsra32_fn |
| }; |
| |
| // func field for spec2 opcode |
| enum func_spec2_op { |
| madd_fn, maddu_fn, mul_fn, rsrv_spec2_3, |
| msub_fn, msubu_fn, |
| clz_fn = 0x20, clo_fn, |
| dclz_fn = 0x24, dclo_fn, |
| sdbbp_fn = 0x3f |
| }; |
| |
| // func field for spec3 opcode |
| enum func_spec3_op { |
| ext_fn, dextm_fn, dextu_fn, dext_fn, |
| ins_fn, dinsm_fn, dinsu_fn, dins_fn, |
| bshfl_fn = 0x20, |
| dbshfl_fn = 0x24, |
| rdhwr_fn = 0x3b |
| }; |
| |
| // sa field for spec3 opcodes, with BSHFL function |
| enum func_spec3_bshfl { |
| wsbh_fn = 0x02, |
| seb_fn = 0x10, |
| seh_fn = 0x18 |
| }; |
| |
| // rt field of regimm opcodes. |
| enum regimm_fn { |
| bltz_fn, bgez_fn, bltzl_fn, bgezl_fn, |
| rsrv_ri_fn4, rsrv_ri_fn5, rsrv_ri_fn6, rsrv_ri_fn7, |
| tgei_fn, tgeiu_fn, tlti_fn, tltiu_fn, |
| teqi_fn, rsrv_ri_fn_0d, tnei_fn, rsrv_ri_fn0f, |
| bltzal_fn, bgezal_fn, bltzall_fn, bgezall_fn, |
| bposge32_fn= 0x1c, |
| synci_fn = 0x1f |
| }; |
| |
| |
| // func field for mad opcodes (MIPS IV). |
| enum mad_func { |
| madd_fp_op = 0x08, msub_fp_op = 0x0a, |
| nmadd_fp_op = 0x0c, nmsub_fp_op = 0x0e |
| }; |
| |
| |
| enum mips_inst_shifts { |
| OP_SHF = 26, |
| JTARGET_SHF = 0, |
| RS_SHF = 21, |
| RT_SHF = 16, |
| RD_SHF = 11, |
| RE_SHF = 6, |
| SA_SHF = RE_SHF, // synonym |
| IMM_SHF = 0, |
| FUNC_SHF = 0, |
| |
| // mask values |
| MSK_16 = 0xffff, |
| |
| |
| CACHEOP_SHF = 18, |
| CACHESEL_SHF = 16, |
| }; |
| }; |
| |
| enum mips_regnames { |
| R_zero = 0, |
| R_at, R_v0, R_v1, R_a0, R_a1, R_a2, R_a3, |
| R_t0, R_t1, R_t2, R_t3, R_t4, R_t5, R_t6, R_t7, |
| R_s0, R_s1, R_s2, R_s3, R_s4, R_s5, R_s6, R_s7, |
| R_t8, R_t9, R_k0, R_k1, R_gp, R_sp, R_s8, R_ra, |
| R_lr = R_s8, |
| |
| // arm regs 0-15 are mips regs 2-17 (meaning s0 & s1 are used) |
| R_at2 = R_s2, // R_at2 = 18 = s2 |
| R_cmp = R_s3, // R_cmp = 19 = s3 |
| R_cmp2 = R_s4 // R_cmp2 = 20 = s4 |
| }; |
| |
| |
| |
| }; // namespace android |
| |
| #endif //ANDROID_MIPSASSEMBLER_H |
