/** | |
* \file a71ch_mbedtls_x86_config.h | |
* | |
* \brief Configuration options (set of defines) | |
* | |
* This set of compile-time options may be used to enable | |
* or disable features selectively, and reduce the global | |
* memory footprint. | |
* | |
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved | |
* SPDX-License-Identifier: Apache-2.0 | |
* | |
* Licensed under the Apache License, Version 2.0 (the "License"); you may | |
* not use this file except in compliance with the License. | |
* You may obtain a copy of the License at | |
* | |
* http://www.apache.org/licenses/LICENSE-2.0 | |
* | |
* Unless required by applicable law or agreed to in writing, software | |
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT | |
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
* See the License for the specific language governing permissions and | |
* limitations under the License. | |
* | |
* This file is part of mbed TLS (https://tls.mbed.org) | |
*/ | |
#ifndef MBEDTLS_CONFIG_X86_H | |
#define MBEDTLS_CONFIG_X86_H | |
#if defined(SSS_USE_FTR_FILE) | |
#include "fsl_sss_ftr.h" | |
#else | |
#include "fsl_sss_ftr_default.h" | |
#endif | |
#ifdef CHECK_MEMORY | |
#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) | |
#define _CRT_SECURE_NO_DEPRECATE 1 | |
#endif | |
#define MBEDTLS_PLATFORM_MEMORY | |
void tstDoTraceAndFree( | |
const char * szWhat, | |
const char * szFunction, const unsigned int line, | |
void * pWhat ); | |
void * tstDoTraceAndCalloc( | |
const char * szNUM, const char * szSize, | |
const char * szFunction, const unsigned int line, | |
const unsigned int num, const unsigned int size ); | |
#define MBEDTLS_PLATFORM_FREE_MACRO(WHAT) \ | |
tstDoTraceAndFree(#WHAT, __FUNCTION__, __LINE__, WHAT ) | |
#define MBEDTLS_PLATFORM_CALLOC_MACRO(NUM, SIZE) \ | |
tstDoTraceAndCalloc(#NUM, #SIZE, __FUNCTION__, __LINE__, NUM, SIZE ) | |
#define MBEDTLS_MEMORY_DEBUG | |
#define MBEDTLS_MEMORY_BUFFER_ALLOC_C | |
#endif /* CHECK_MEMORY */ | |
/** | |
* \name SECTION: System support | |
* | |
* This section sets system specific settings. | |
* \{ | |
*/ | |
/** | |
* \def MBEDTLS_HAVE_ASM | |
* | |
* The compiler has support for asm(). | |
* | |
* Requires support for asm() in compiler. | |
* | |
* Used in: | |
* library/aria.c | |
* library/timing.c | |
* include/mbedtls/bn_mul.h | |
* | |
* Required by: | |
* MBEDTLS_AESNI_C | |
* MBEDTLS_PADLOCK_C | |
* | |
* Comment to disable the use of assembly code. | |
*/ | |
#define MBEDTLS_HAVE_ASM | |
/** | |
* \def MBEDTLS_NO_UDBL_DIVISION | |
* | |
* The platform lacks support for double-width integer division (64-bit | |
* division on a 32-bit platform, 128-bit division on a 64-bit platform). | |
* | |
* Used in: | |
* include/mbedtls/bignum.h | |
* library/bignum.c | |
* | |
* The bignum code uses double-width division to speed up some operations. | |
* Double-width division is often implemented in software that needs to | |
* be linked with the program. The presence of a double-width integer | |
* type is usually detected automatically through preprocessor macros, | |
* but the automatic detection cannot know whether the code needs to | |
* and can be linked with an implementation of division for that type. | |
* By default division is assumed to be usable if the type is present. | |
* Uncomment this option to prevent the use of double-width division. | |
* | |
* Note that division for the native integer type is always required. | |
* Furthermore, a 64-bit type is always required even on a 32-bit | |
* platform, but it need not support multiplication or division. In some | |
* cases it is also desirable to disable some double-width operations. For | |
* example, if double-width division is implemented in software, disabling | |
* it can reduce code size in some embedded targets. | |
*/ | |
//#define MBEDTLS_NO_UDBL_DIVISION | |
/** | |
* \def MBEDTLS_NO_64BIT_MULTIPLICATION | |
* | |
* The platform lacks support for 32x32 -> 64-bit multiplication. | |
* | |
* Used in: | |
* library/poly1305.c | |
* | |
* Some parts of the library may use multiplication of two unsigned 32-bit | |
* operands with a 64-bit result in order to speed up computations. On some | |
* platforms, this is not available in hardware and has to be implemented in | |
* software, usually in a library provided by the toolchain. | |
* | |
* Sometimes it is not desirable to have to link to that library. This option | |
* removes the dependency of that library on platforms that lack a hardware | |
* 64-bit multiplier by embedding a software implementation in Mbed TLS. | |
* | |
* Note that depending on the compiler, this may decrease performance compared | |
* to using the library function provided by the toolchain. | |
*/ | |
//#define MBEDTLS_NO_64BIT_MULTIPLICATION | |
/** | |
* \def MBEDTLS_HAVE_SSE2 | |
* | |
* CPU supports SSE2 instruction set. | |
* | |
* Uncomment if the CPU supports SSE2 (IA-32 specific). | |
*/ | |
//#define MBEDTLS_HAVE_SSE2 | |
/** | |
* \def MBEDTLS_HAVE_TIME | |
* | |
* System has time.h and time(). | |
* The time does not need to be correct, only time differences are used, | |
* by contrast with MBEDTLS_HAVE_TIME_DATE | |
* | |
* Defining MBEDTLS_HAVE_TIME allows you to specify MBEDTLS_PLATFORM_TIME_ALT, | |
* MBEDTLS_PLATFORM_TIME_MACRO, MBEDTLS_PLATFORM_TIME_TYPE_MACRO and | |
* MBEDTLS_PLATFORM_STD_TIME. | |
* | |
* Comment if your system does not support time functions | |
*/ | |
#define MBEDTLS_HAVE_TIME | |
/** | |
* \def MBEDTLS_HAVE_TIME_DATE | |
* | |
* System has time.h and time(), gmtime() and the clock is correct. | |
* The time needs to be correct (not necesarily very accurate, but at least | |
* the date should be correct). This is used to verify the validity period of | |
* X.509 certificates. | |
* | |
* Comment if your system does not have a correct clock. | |
*/ | |
#define MBEDTLS_HAVE_TIME_DATE | |
/** | |
* \def MBEDTLS_PLATFORM_MEMORY | |
* | |
* Enable the memory allocation layer. | |
* | |
* By default mbed TLS uses the system-provided calloc() and free(). | |
* This allows different allocators (self-implemented or provided) to be | |
* provided to the platform abstraction layer. | |
* | |
* Enabling MBEDTLS_PLATFORM_MEMORY without the | |
* MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide | |
* "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and | |
* free() function pointer at runtime. | |
* | |
* Enabling MBEDTLS_PLATFORM_MEMORY and specifying | |
* MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the | |
* alternate function at compile time. | |
* | |
* Requires: MBEDTLS_PLATFORM_C | |
* | |
* Enable this layer to allow use of alternative memory allocators. | |
*/ | |
//#define MBEDTLS_PLATFORM_MEMORY | |
/** | |
* \def MBEDTLS_PLATFORM_NO_STD_FUNCTIONS | |
* | |
* Do not assign standard functions in the platform layer (e.g. calloc() to | |
* MBEDTLS_PLATFORM_STD_CALLOC and printf() to MBEDTLS_PLATFORM_STD_PRINTF) | |
* | |
* This makes sure there are no linking errors on platforms that do not support | |
* these functions. You will HAVE to provide alternatives, either at runtime | |
* via the platform_set_xxx() functions or at compile time by setting | |
* the MBEDTLS_PLATFORM_STD_XXX defines, or enabling a | |
* MBEDTLS_PLATFORM_XXX_MACRO. | |
* | |
* Requires: MBEDTLS_PLATFORM_C | |
* | |
* Uncomment to prevent default assignment of standard functions in the | |
* platform layer. | |
*/ | |
//#define MBEDTLS_PLATFORM_NO_STD_FUNCTIONS | |
/** | |
* \def MBEDTLS_PLATFORM_EXIT_ALT | |
* | |
* MBEDTLS_PLATFORM_XXX_ALT: Uncomment a macro to let mbed TLS support the | |
* function in the platform abstraction layer. | |
* | |
* Example: In case you uncomment MBEDTLS_PLATFORM_PRINTF_ALT, mbed TLS will | |
* provide a function "mbedtls_platform_set_printf()" that allows you to set an | |
* alternative printf function pointer. | |
* | |
* All these define require MBEDTLS_PLATFORM_C to be defined! | |
* | |
* \note MBEDTLS_PLATFORM_SNPRINTF_ALT is required on Windows; | |
* it will be enabled automatically by check_config.h | |
* | |
* \warning MBEDTLS_PLATFORM_XXX_ALT cannot be defined at the same time as | |
* MBEDTLS_PLATFORM_XXX_MACRO! | |
* | |
* Requires: MBEDTLS_PLATFORM_TIME_ALT requires MBEDTLS_HAVE_TIME | |
* | |
* Uncomment a macro to enable alternate implementation of specific base | |
* platform function | |
*/ | |
//#define MBEDTLS_PLATFORM_EXIT_ALT | |
//#define MBEDTLS_PLATFORM_TIME_ALT | |
//#define MBEDTLS_PLATFORM_FPRINTF_ALT | |
//#define MBEDTLS_PLATFORM_PRINTF_ALT | |
//#define MBEDTLS_PLATFORM_SNPRINTF_ALT | |
//#define MBEDTLS_PLATFORM_NV_SEED_ALT | |
//#define MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT | |
/** | |
* \def MBEDTLS_DEPRECATED_WARNING | |
* | |
* Mark deprecated functions so that they generate a warning if used. | |
* Functions deprecated in one version will usually be removed in the next | |
* version. You can enable this to help you prepare the transition to a new | |
* major version by making sure your code is not using these functions. | |
* | |
* This only works with GCC and Clang. With other compilers, you may want to | |
* use MBEDTLS_DEPRECATED_REMOVED | |
* | |
* Uncomment to get warnings on using deprecated functions. | |
*/ | |
//#define MBEDTLS_DEPRECATED_WARNING | |
/** | |
* \def MBEDTLS_DEPRECATED_REMOVED | |
* | |
* Remove deprecated functions so that they generate an error if used. | |
* Functions deprecated in one version will usually be removed in the next | |
* version. You can enable this to help you prepare the transition to a new | |
* major version by making sure your code is not using these functions. | |
* | |
* Uncomment to get errors on using deprecated functions. | |
*/ | |
//#define MBEDTLS_DEPRECATED_REMOVED | |
/* \} name SECTION: System support */ | |
/** | |
* \name SECTION: mbed TLS feature support | |
* | |
* This section sets support for features that are or are not needed | |
* within the modules that are enabled. | |
* \{ | |
*/ | |
/** | |
* \def MBEDTLS_TIMING_ALT | |
* | |
* Uncomment to provide your own alternate implementation for mbedtls_timing_hardclock(), | |
* mbedtls_timing_get_timer(), mbedtls_set_alarm(), mbedtls_set/get_delay() | |
* | |
* Only works if you have MBEDTLS_TIMING_C enabled. | |
* | |
* You will need to provide a header "timing_alt.h" and an implementation at | |
* compile time. | |
*/ | |
//#define MBEDTLS_TIMING_ALT | |
/** | |
* \def MBEDTLS_AES_ALT | |
* | |
* MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let mbed TLS use your | |
* alternate core implementation of a symmetric crypto, an arithmetic or hash | |
* module (e.g. platform specific assembly optimized implementations). Keep | |
* in mind that the function prototypes should remain the same. | |
* | |
* This replaces the whole module. If you only want to replace one of the | |
* functions, use one of the MBEDTLS__FUNCTION_NAME__ALT flags. | |
* | |
* Example: In case you uncomment MBEDTLS_AES_ALT, mbed TLS will no longer | |
* provide the "struct mbedtls_aes_context" definition and omit the base | |
* function declarations and implementations. "aes_alt.h" will be included from | |
* "aes.h" to include the new function definitions. | |
* | |
* Uncomment a macro to enable alternate implementation of the corresponding | |
* module. | |
* | |
* \warning MD2, MD4, MD5, ARC4, DES and SHA-1 are considered weak and their | |
* use constitutes a security risk. If possible, we recommend | |
* avoiding dependencies on them, and considering stronger message | |
* digests and ciphers instead. | |
* | |
*/ | |
//#define MBEDTLS_AES_ALT | |
//#define MBEDTLS_ARC4_ALT | |
//#define MBEDTLS_ARIA_ALT | |
//#define MBEDTLS_BLOWFISH_ALT | |
//#define MBEDTLS_CAMELLIA_ALT | |
//#define MBEDTLS_CCM_ALT | |
//#define MBEDTLS_CHACHA20_ALT | |
//#define MBEDTLS_CHACHAPOLY_ALT | |
//#define MBEDTLS_CMAC_ALT | |
//#define MBEDTLS_DES_ALT | |
//#define MBEDTLS_DHM_ALT | |
//#define MBEDTLS_ECJPAKE_ALT | |
//#define MBEDTLS_GCM_ALT | |
//#define MBEDTLS_NIST_KW_ALT | |
//#define MBEDTLS_MD2_ALT | |
//#define MBEDTLS_MD4_ALT | |
//#define MBEDTLS_MD5_ALT | |
//#define MBEDTLS_POLY1305_ALT | |
//#define MBEDTLS_RIPEMD160_ALT | |
//#define MBEDTLS_RSA_ALT | |
//#define MBEDTLS_SHA1_ALT | |
//#define MBEDTLS_SHA256_ALT | |
//#define MBEDTLS_SHA512_ALT | |
//#define MBEDTLS_XTEA_ALT | |
/* | |
* When replacing the elliptic curve module, pleace consider, that it is | |
* implemented with two .c files: | |
* - ecp.c | |
* - ecp_curves.c | |
* You can replace them very much like all the other MBEDTLS__MODULE_NAME__ALT | |
* macros as described above. The only difference is that you have to make sure | |
* that you provide functionality for both .c files. | |
*/ | |
#ifdef TGT_A71CH | |
# define MBEDTLS_ECP_ALT | |
#endif /* TGT_A71CH */ | |
//#define MBEDTLS_ECP_ALT | |
#ifdef TGT_A71CH | |
# define MBEDTLS_ECDH_ALT | |
# define MBEDTLS_ECDH_GEN_PUBLIC_ALT | |
# define MBEDTLS_ECDH_COMPUTE_SHARED_ALT | |
#endif /* TGT_A71CH */ | |
//#define MBEDTLS_ECDH_ALT | |
/** | |
* \def MBEDTLS_MD2_PROCESS_ALT | |
* | |
* MBEDTLS__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use you | |
* alternate core implementation of symmetric crypto or hash function. Keep in | |
* mind that function prototypes should remain the same. | |
* | |
* This replaces only one function. The header file from mbed TLS is still | |
* used, in contrast to the MBEDTLS__MODULE_NAME__ALT flags. | |
* | |
* Example: In case you uncomment MBEDTLS_SHA256_PROCESS_ALT, mbed TLS will | |
* no longer provide the mbedtls_sha1_process() function, but it will still provide | |
* the other function (using your mbedtls_sha1_process() function) and the definition | |
* of mbedtls_sha1_context, so your implementation of mbedtls_sha1_process must be compatible | |
* with this definition. | |
* | |
* \note Because of a signature change, the core AES encryption and decryption routines are | |
* currently named mbedtls_aes_internal_encrypt and mbedtls_aes_internal_decrypt, | |
* respectively. When setting up alternative implementations, these functions should | |
* be overriden, but the wrapper functions mbedtls_aes_decrypt and mbedtls_aes_encrypt | |
* must stay untouched. | |
* | |
* \note If you use the AES_xxx_ALT macros, then is is recommended to also set | |
* MBEDTLS_AES_ROM_TABLES in order to help the linker garbage-collect the AES | |
* tables. | |
* | |
* Uncomment a macro to enable alternate implementation of the corresponding | |
* function. | |
* | |
* \warning MD2, MD4, MD5, DES and SHA-1 are considered weak and their use | |
* constitutes a security risk. If possible, we recommend avoiding | |
* dependencies on them, and considering stronger message digests | |
* and ciphers instead. | |
* | |
*/ | |
//#define MBEDTLS_MD2_PROCESS_ALT | |
//#define MBEDTLS_MD4_PROCESS_ALT | |
//#define MBEDTLS_MD5_PROCESS_ALT | |
//#define MBEDTLS_RIPEMD160_PROCESS_ALT | |
//#define MBEDTLS_SHA1_PROCESS_ALT | |
//#define MBEDTLS_SHA256_PROCESS_ALT | |
//#define MBEDTLS_SHA512_PROCESS_ALT | |
//#define MBEDTLS_DES_SETKEY_ALT | |
//#define MBEDTLS_DES_CRYPT_ECB_ALT | |
//#define MBEDTLS_DES3_CRYPT_ECB_ALT | |
//#define MBEDTLS_AES_SETKEY_ENC_ALT | |
//#define MBEDTLS_AES_SETKEY_DEC_ALT | |
//#define MBEDTLS_AES_ENCRYPT_ALT | |
//#define MBEDTLS_AES_DECRYPT_ALT | |
//#define MBEDTLS_ECDH_GEN_PUBLIC_ALT | |
//#define MBEDTLS_ECDH_COMPUTE_SHARED_ALT | |
//#define MBEDTLS_ECDSA_VERIFY_ALT | |
//#define MBEDTLS_ECDSA_SIGN_ALT | |
//#define MBEDTLS_ECDSA_GENKEY_ALT | |
/** | |
* \def MBEDTLS_ECP_INTERNAL_ALT | |
* | |
* Expose a part of the internal interface of the Elliptic Curve Point module. | |
* | |
* MBEDTLS_ECP__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use your | |
* alternative core implementation of elliptic curve arithmetic. Keep in mind | |
* that function prototypes should remain the same. | |
* | |
* This partially replaces one function. The header file from mbed TLS is still | |
* used, in contrast to the MBEDTLS_ECP_ALT flag. The original implementation | |
* is still present and it is used for group structures not supported by the | |
* alternative. | |
* | |
* Any of these options become available by defining MBEDTLS_ECP_INTERNAL_ALT | |
* and implementing the following functions: | |
* unsigned char mbedtls_internal_ecp_grp_capable( | |
* const mbedtls_ecp_group *grp ) | |
* int mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp ) | |
* void mbedtls_internal_ecp_deinit( const mbedtls_ecp_group *grp ) | |
* The mbedtls_internal_ecp_grp_capable function should return 1 if the | |
* replacement functions implement arithmetic for the given group and 0 | |
* otherwise. | |
* The functions mbedtls_internal_ecp_init and mbedtls_internal_ecp_deinit are | |
* called before and after each point operation and provide an opportunity to | |
* implement optimized set up and tear down instructions. | |
* | |
* Example: In case you uncomment MBEDTLS_ECP_INTERNAL_ALT and | |
* MBEDTLS_ECP_DOUBLE_JAC_ALT, mbed TLS will still provide the ecp_double_jac | |
* function, but will use your mbedtls_internal_ecp_double_jac if the group is | |
* supported (your mbedtls_internal_ecp_grp_capable function returns 1 when | |
* receives it as an argument). If the group is not supported then the original | |
* implementation is used. The other functions and the definition of | |
* mbedtls_ecp_group and mbedtls_ecp_point will not change, so your | |
* implementation of mbedtls_internal_ecp_double_jac and | |
* mbedtls_internal_ecp_grp_capable must be compatible with this definition. | |
* | |
* Uncomment a macro to enable alternate implementation of the corresponding | |
* function. | |
*/ | |
/* Required for all the functions in this section */ | |
//#define MBEDTLS_ECP_INTERNAL_ALT | |
/* Support for Weierstrass curves with Jacobi representation */ | |
//#define MBEDTLS_ECP_RANDOMIZE_JAC_ALT | |
//#define MBEDTLS_ECP_ADD_MIXED_ALT | |
//#define MBEDTLS_ECP_DOUBLE_JAC_ALT | |
//#define MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT | |
//#define MBEDTLS_ECP_NORMALIZE_JAC_ALT | |
/* Support for curves with Montgomery arithmetic */ | |
//#define MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT | |
//#define MBEDTLS_ECP_RANDOMIZE_MXZ_ALT | |
//#define MBEDTLS_ECP_NORMALIZE_MXZ_ALT | |
/** | |
* \def MBEDTLS_TEST_NULL_ENTROPY | |
* | |
* Enables testing and use of mbed TLS without any configured entropy sources. | |
* This permits use of the library on platforms before an entropy source has | |
* been integrated (see for example the MBEDTLS_ENTROPY_HARDWARE_ALT or the | |
* MBEDTLS_ENTROPY_NV_SEED switches). | |
* | |
* WARNING! This switch MUST be disabled in production builds, and is suitable | |
* only for development. | |
* Enabling the switch negates any security provided by the library. | |
* | |
* Requires MBEDTLS_ENTROPY_C, MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES | |
* | |
*/ | |
//#define MBEDTLS_TEST_NULL_ENTROPY | |
/** | |
* \def MBEDTLS_ENTROPY_HARDWARE_ALT | |
* | |
* Uncomment this macro to let mbed TLS use your own implementation of a | |
* hardware entropy collector. | |
* | |
* Your function must be called \c mbedtls_hardware_poll(), have the same | |
* prototype as declared in entropy_poll.h, and accept NULL as first argument. | |
* | |
* Uncomment to use your own hardware entropy collector. | |
*/ | |
//#define MBEDTLS_ENTROPY_HARDWARE_ALT | |
/** | |
* \def MBEDTLS_AES_ROM_TABLES | |
* | |
* Use precomputed AES tables stored in ROM. | |
* | |
* Uncomment this macro to use precomputed AES tables stored in ROM. | |
* Comment this macro to generate AES tables in RAM at runtime. | |
* | |
* Tradeoff: Using precomputed ROM tables reduces RAM usage by ~8kb | |
* (or ~2kb if \c MBEDTLS_AES_FEWER_TABLES is used) and reduces the | |
* initialization time before the first AES operation can be performed. | |
* It comes at the cost of additional ~8kb ROM use (resp. ~2kb if \c | |
* MBEDTLS_AES_FEWER_TABLES below is used), and potentially degraded | |
* performance if ROM access is slower than RAM access. | |
* | |
* This option is independent of \c MBEDTLS_AES_FEWER_TABLES. | |
* | |
*/ | |
//#define MBEDTLS_AES_ROM_TABLES | |
/** | |
* \def MBEDTLS_AES_FEWER_TABLES | |
* | |
* Use less ROM/RAM for AES tables. | |
* | |
* Uncommenting this macro omits 75% of the AES tables from | |
* ROM / RAM (depending on the value of \c MBEDTLS_AES_ROM_TABLES) | |
* by computing their values on the fly during operations | |
* (the tables are entry-wise rotations of one another). | |
* | |
* Tradeoff: Uncommenting this reduces the RAM / ROM footprint | |
* by ~6kb but at the cost of more arithmetic operations during | |
* runtime. Specifically, one has to compare 4 accesses within | |
* different tables to 4 accesses with additional arithmetic | |
* operations within the same table. The performance gain/loss | |
* depends on the system and memory details. | |
* | |
* This option is independent of \c MBEDTLS_AES_ROM_TABLES. | |
* | |
*/ | |
//#define MBEDTLS_AES_FEWER_TABLES | |
/** | |
* \def MBEDTLS_CAMELLIA_SMALL_MEMORY | |
* | |
* Use less ROM for the Camellia implementation (saves about 768 bytes). | |
* | |
* Uncomment this macro to use less memory for Camellia. | |
*/ | |
//#define MBEDTLS_CAMELLIA_SMALL_MEMORY | |
/** | |
* \def MBEDTLS_CIPHER_MODE_CBC | |
* | |
* Enable Cipher Block Chaining mode (CBC) for symmetric ciphers. | |
*/ | |
#define MBEDTLS_CIPHER_MODE_CBC | |
/** | |
* \def MBEDTLS_CIPHER_MODE_CFB | |
* | |
* Enable Cipher Feedback mode (CFB) for symmetric ciphers. | |
*/ | |
#define MBEDTLS_CIPHER_MODE_CFB | |
/** | |
* \def MBEDTLS_CIPHER_MODE_CTR | |
* | |
* Enable Counter Block Cipher mode (CTR) for symmetric ciphers. | |
*/ | |
#define MBEDTLS_CIPHER_MODE_CTR | |
/** | |
* \def MBEDTLS_CIPHER_MODE_OFB | |
* | |
* Enable Output Feedback mode (OFB) for symmetric ciphers. | |
*/ | |
#define MBEDTLS_CIPHER_MODE_OFB | |
/** | |
* \def MBEDTLS_CIPHER_MODE_XTS | |
* | |
* Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES. | |
*/ | |
#define MBEDTLS_CIPHER_MODE_XTS | |
/** | |
* \def MBEDTLS_CIPHER_NULL_CIPHER | |
* | |
* Enable NULL cipher. | |
* Warning: Only do so when you know what you are doing. This allows for | |
* encryption or channels without any security! | |
* | |
* Requires MBEDTLS_ENABLE_WEAK_CIPHERSUITES as well to enable | |
* the following ciphersuites: | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA | |
* MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA | |
* MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384 | |
* MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256 | |
* MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA | |
* MBEDTLS_TLS_RSA_WITH_NULL_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_NULL_SHA | |
* MBEDTLS_TLS_RSA_WITH_NULL_MD5 | |
* MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384 | |
* MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256 | |
* MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA | |
* MBEDTLS_TLS_PSK_WITH_NULL_SHA384 | |
* MBEDTLS_TLS_PSK_WITH_NULL_SHA256 | |
* MBEDTLS_TLS_PSK_WITH_NULL_SHA | |
* | |
* Uncomment this macro to enable the NULL cipher and ciphersuites | |
*/ | |
//#define MBEDTLS_CIPHER_NULL_CIPHER | |
/** | |
* \def MBEDTLS_CIPHER_PADDING_PKCS7 | |
* | |
* MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for | |
* specific padding modes in the cipher layer with cipher modes that support | |
* padding (e.g. CBC) | |
* | |
* If you disable all padding modes, only full blocks can be used with CBC. | |
* | |
* Enable padding modes in the cipher layer. | |
*/ | |
#define MBEDTLS_CIPHER_PADDING_PKCS7 | |
#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS | |
#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN | |
#define MBEDTLS_CIPHER_PADDING_ZEROS | |
/** | |
* \def MBEDTLS_ENABLE_WEAK_CIPHERSUITES | |
* | |
* Enable weak ciphersuites in SSL / TLS. | |
* Warning: Only do so when you know what you are doing. This allows for | |
* channels with virtually no security at all! | |
* | |
* This enables the following ciphersuites: | |
* MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA | |
* MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA | |
* | |
* Uncomment this macro to enable weak ciphersuites | |
* | |
* \warning DES is considered a weak cipher and its use constitutes a | |
* security risk. We recommend considering stronger ciphers instead. | |
*/ | |
//#define MBEDTLS_ENABLE_WEAK_CIPHERSUITES | |
/** | |
* \def MBEDTLS_REMOVE_ARC4_CIPHERSUITES | |
* | |
* Remove RC4 ciphersuites by default in SSL / TLS. | |
* This flag removes the ciphersuites based on RC4 from the default list as | |
* returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible to | |
* enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including them | |
* explicitly. | |
* | |
* Uncomment this macro to remove RC4 ciphersuites by default. | |
*/ | |
#define MBEDTLS_REMOVE_ARC4_CIPHERSUITES | |
/** | |
* \def MBEDTLS_ECP_DP_SECP192R1_ENABLED | |
* | |
* MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve | |
* module. By default all supported curves are enabled. | |
* | |
* Comment macros to disable the curve and functions for it | |
*/ | |
#define MBEDTLS_ECP_DP_SECP192R1_ENABLED | |
#define MBEDTLS_ECP_DP_SECP224R1_ENABLED | |
#define MBEDTLS_ECP_DP_SECP256R1_ENABLED | |
#define MBEDTLS_ECP_DP_SECP384R1_ENABLED | |
#define MBEDTLS_ECP_DP_SECP521R1_ENABLED | |
#define MBEDTLS_ECP_DP_SECP192K1_ENABLED | |
#define MBEDTLS_ECP_DP_SECP224K1_ENABLED | |
#define MBEDTLS_ECP_DP_SECP256K1_ENABLED | |
#define MBEDTLS_ECP_DP_BP256R1_ENABLED | |
#define MBEDTLS_ECP_DP_BP384R1_ENABLED | |
#define MBEDTLS_ECP_DP_BP512R1_ENABLED | |
#define MBEDTLS_ECP_DP_CURVE25519_ENABLED | |
#define MBEDTLS_ECP_DP_CURVE448_ENABLED | |
#ifdef TGT_A71CH | |
# undef MBEDTLS_ECP_DP_SECP192R1_ENABLED | |
# undef MBEDTLS_ECP_DP_SECP224R1_ENABLED | |
# undef MBEDTLS_ECP_DP_SECP384R1_ENABLED | |
# undef MBEDTLS_ECP_DP_SECP521R1_ENABLED | |
# undef MBEDTLS_ECP_DP_SECP192K1_ENABLED | |
# undef MBEDTLS_ECP_DP_SECP224K1_ENABLED | |
# undef MBEDTLS_ECP_DP_SECP256K1_ENABLED | |
# undef MBEDTLS_ECP_DP_BP256R1_ENABLED | |
# undef MBEDTLS_ECP_DP_BP384R1_ENABLED | |
# undef MBEDTLS_ECP_DP_BP512R1_ENABLED | |
# undef MBEDTLS_ECP_DP_CURVE25519_ENABLED | |
# undef MBEDTLS_ECP_DP_CURVE448_ENABLED | |
#endif | |
/** | |
* \def MBEDTLS_ECP_NIST_OPTIM | |
* | |
* Enable specific 'modulo p' routines for each NIST prime. | |
* Depending on the prime and architecture, makes operations 4 to 8 times | |
* faster on the corresponding curve. | |
* | |
* Comment this macro to disable NIST curves optimisation. | |
*/ | |
#define MBEDTLS_ECP_NIST_OPTIM | |
/** | |
* \def MBEDTLS_ECDSA_DETERMINISTIC | |
* | |
* Enable deterministic ECDSA (RFC 6979). | |
* Standard ECDSA is "fragile" in the sense that lack of entropy when signing | |
* may result in a compromise of the long-term signing key. This is avoided by | |
* the deterministic variant. | |
* | |
* Requires: MBEDTLS_HMAC_DRBG_C | |
* | |
* Comment this macro to disable deterministic ECDSA. | |
*/ | |
#define MBEDTLS_ECDSA_DETERMINISTIC | |
/** | |
* \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED | |
* | |
* Enable the PSK based ciphersuite modes in SSL / TLS. | |
* | |
* This enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_PSK_WITH_RC4_128_SHA | |
*/ | |
#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED | |
/** | |
* \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED | |
* | |
* Enable the DHE-PSK based ciphersuite modes in SSL / TLS. | |
* | |
* Requires: MBEDTLS_DHM_C | |
* | |
* This enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA | |
* | |
* \warning Using DHE constitutes a security risk as it | |
* is not possible to validate custom DH parameters. | |
* If possible, it is recommended users should consider | |
* preferring other methods of key exchange. | |
* See dhm.h for more details. | |
* | |
*/ | |
#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED | |
/** | |
* \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED | |
* | |
* Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS. | |
* | |
* Requires: MBEDTLS_ECDH_C | |
* | |
* This enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA | |
*/ | |
#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED | |
/** | |
* \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED | |
* | |
* Enable the RSA-PSK based ciphersuite modes in SSL / TLS. | |
* | |
* Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, | |
* MBEDTLS_X509_CRT_PARSE_C | |
* | |
* This enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA | |
*/ | |
#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED | |
/** | |
* \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED | |
* | |
* Enable the RSA-only based ciphersuite modes in SSL / TLS. | |
* | |
* Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, | |
* MBEDTLS_X509_CRT_PARSE_C | |
* | |
* This enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA | |
* MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA | |
* MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_RSA_WITH_RC4_128_SHA | |
* MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 | |
*/ | |
#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED | |
/** | |
* \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED | |
* | |
* Enable the DHE-RSA based ciphersuite modes in SSL / TLS. | |
* | |
* Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, | |
* MBEDTLS_X509_CRT_PARSE_C | |
* | |
* This enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA | |
* MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA | |
* | |
* \warning Using DHE constitutes a security risk as it | |
* is not possible to validate custom DH parameters. | |
* If possible, it is recommended users should consider | |
* preferring other methods of key exchange. | |
* See dhm.h for more details. | |
* | |
*/ | |
#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED | |
/** | |
* \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED | |
* | |
* Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS. | |
* | |
* Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, | |
* MBEDTLS_X509_CRT_PARSE_C | |
* | |
* This enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA | |
*/ | |
#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED | |
/** | |
* \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED | |
* | |
* Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS. | |
* | |
* Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C, | |
* | |
* This enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA | |
*/ | |
#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED | |
/** | |
* \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED | |
* | |
* Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS. | |
* | |
* Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C | |
* | |
* This enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 | |
*/ | |
#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED | |
/** | |
* \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED | |
* | |
* Enable the ECDH-RSA based ciphersuite modes in SSL / TLS. | |
* | |
* Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C | |
* | |
* This enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA | |
* MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 | |
*/ | |
#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED | |
/** | |
* \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED | |
* | |
* Enable the ECJPAKE based ciphersuite modes in SSL / TLS. | |
* | |
* \warning This is currently experimental. EC J-PAKE support is based on the | |
* Thread v1.0.0 specification; incompatible changes to the specification | |
* might still happen. For this reason, this is disabled by default. | |
* | |
* Requires: MBEDTLS_ECJPAKE_C | |
* MBEDTLS_SHA256_C | |
* MBEDTLS_ECP_DP_SECP256R1_ENABLED | |
* | |
* This enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8 | |
*/ | |
//#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED | |
/** | |
* \def MBEDTLS_PK_PARSE_EC_EXTENDED | |
* | |
* Enhance support for reading EC keys using variants of SEC1 not allowed by | |
* RFC 5915 and RFC 5480. | |
* | |
* Currently this means parsing the SpecifiedECDomain choice of EC | |
* parameters (only known groups are supported, not arbitrary domains, to | |
* avoid validation issues). | |
* | |
* Disable if you only need to support RFC 5915 + 5480 key formats. | |
*/ | |
#define MBEDTLS_PK_PARSE_EC_EXTENDED | |
/** | |
* \def MBEDTLS_ERROR_STRERROR_DUMMY | |
* | |
* Enable a dummy error function to make use of mbedtls_strerror() in | |
* third party libraries easier when MBEDTLS_ERROR_C is disabled | |
* (no effect when MBEDTLS_ERROR_C is enabled). | |
* | |
* You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're | |
* not using mbedtls_strerror() or error_strerror() in your application. | |
* | |
* Disable if you run into name conflicts and want to really remove the | |
* mbedtls_strerror() | |
*/ | |
#define MBEDTLS_ERROR_STRERROR_DUMMY | |
/** | |
* \def MBEDTLS_GENPRIME | |
* | |
* Enable the prime-number generation code. | |
* | |
* Requires: MBEDTLS_BIGNUM_C | |
*/ | |
#define MBEDTLS_GENPRIME | |
/** | |
* \def MBEDTLS_FS_IO | |
* | |
* Enable functions that use the filesystem. | |
*/ | |
#define MBEDTLS_FS_IO | |
/** | |
* \def MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES | |
* | |
* Do not add default entropy sources. These are the platform specific, | |
* mbedtls_timing_hardclock and HAVEGE based poll functions. | |
* | |
* This is useful to have more control over the added entropy sources in an | |
* application. | |
* | |
* Uncomment this macro to prevent loading of default entropy functions. | |
*/ | |
//#define MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES | |
/** | |
* \def MBEDTLS_NO_PLATFORM_ENTROPY | |
* | |
* Do not use built-in platform entropy functions. | |
* This is useful if your platform does not support | |
* standards like the /dev/urandom or Windows CryptoAPI. | |
* | |
* Uncomment this macro to disable the built-in platform entropy functions. | |
*/ | |
//#define MBEDTLS_NO_PLATFORM_ENTROPY | |
/** | |
* \def MBEDTLS_ENTROPY_FORCE_SHA256 | |
* | |
* Force the entropy accumulator to use a SHA-256 accumulator instead of the | |
* default SHA-512 based one (if both are available). | |
* | |
* Requires: MBEDTLS_SHA256_C | |
* | |
* On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option | |
* if you have performance concerns. | |
* | |
* This option is only useful if both MBEDTLS_SHA256_C and | |
* MBEDTLS_SHA512_C are defined. Otherwise the available hash module is used. | |
*/ | |
//#define MBEDTLS_ENTROPY_FORCE_SHA256 | |
/** | |
* \def MBEDTLS_ENTROPY_NV_SEED | |
* | |
* Enable the non-volatile (NV) seed file-based entropy source. | |
* (Also enables the NV seed read/write functions in the platform layer) | |
* | |
* This is crucial (if not required) on systems that do not have a | |
* cryptographic entropy source (in hardware or kernel) available. | |
* | |
* Requires: MBEDTLS_ENTROPY_C, MBEDTLS_PLATFORM_C | |
* | |
* \note The read/write functions that are used by the entropy source are | |
* determined in the platform layer, and can be modified at runtime and/or | |
* compile-time depending on the flags (MBEDTLS_PLATFORM_NV_SEED_*) used. | |
* | |
* \note If you use the default implementation functions that read a seedfile | |
* with regular fopen(), please make sure you make a seedfile with the | |
* proper name (defined in MBEDTLS_PLATFORM_STD_NV_SEED_FILE) and at | |
* least MBEDTLS_ENTROPY_BLOCK_SIZE bytes in size that can be read from | |
* and written to or you will get an entropy source error! The default | |
* implementation will only use the first MBEDTLS_ENTROPY_BLOCK_SIZE | |
* bytes from the file. | |
* | |
* \note The entropy collector will write to the seed file before entropy is | |
* given to an external source, to update it. | |
*/ | |
//#define MBEDTLS_ENTROPY_NV_SEED | |
/** | |
* \def MBEDTLS_MEMORY_DEBUG | |
* | |
* Enable debugging of buffer allocator memory issues. Automatically prints | |
* (to stderr) all (fatal) messages on memory allocation issues. Enables | |
* function for 'debug output' of allocated memory. | |
* | |
* Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C | |
* | |
* Uncomment this macro to let the buffer allocator print out error messages. | |
*/ | |
//#define MBEDTLS_MEMORY_DEBUG | |
/** | |
* \def MBEDTLS_MEMORY_BACKTRACE | |
* | |
* Include backtrace information with each allocated block. | |
* | |
* Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C | |
* GLIBC-compatible backtrace() an backtrace_symbols() support | |
* | |
* Uncomment this macro to include backtrace information | |
*/ | |
//#define MBEDTLS_MEMORY_BACKTRACE | |
/** | |
* \def MBEDTLS_PK_RSA_ALT_SUPPORT | |
* | |
* Support external private RSA keys (eg from a HSM) in the PK layer. | |
* | |
* Comment this macro to disable support for external private RSA keys. | |
*/ | |
#define MBEDTLS_PK_RSA_ALT_SUPPORT | |
/** | |
* \def MBEDTLS_PKCS1_V15 | |
* | |
* Enable support for PKCS#1 v1.5 encoding. | |
* | |
* Requires: MBEDTLS_RSA_C | |
* | |
* This enables support for PKCS#1 v1.5 operations. | |
*/ | |
#define MBEDTLS_PKCS1_V15 | |
/** | |
* \def MBEDTLS_PKCS1_V21 | |
* | |
* Enable support for PKCS#1 v2.1 encoding. | |
* | |
* Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C | |
* | |
* This enables support for RSAES-OAEP and RSASSA-PSS operations. | |
*/ | |
#define MBEDTLS_PKCS1_V21 | |
/** | |
* \def MBEDTLS_RSA_NO_CRT | |
* | |
* Do not use the Chinese Remainder Theorem | |
* for the RSA private operation. | |
* | |
* Uncomment this macro to disable the use of CRT in RSA. | |
* | |
*/ | |
//#define MBEDTLS_RSA_NO_CRT | |
/** | |
* \def MBEDTLS_SELF_TEST | |
* | |
* Enable the checkup functions (*_self_test). | |
*/ | |
#define MBEDTLS_SELF_TEST | |
/** | |
* \def MBEDTLS_SHA256_SMALLER | |
* | |
* Enable an implementation of SHA-256 that has lower ROM footprint but also | |
* lower performance. | |
* | |
* The default implementation is meant to be a reasonnable compromise between | |
* performance and size. This version optimizes more aggressively for size at | |
* the expense of performance. Eg on Cortex-M4 it reduces the size of | |
* mbedtls_sha256_process() from ~2KB to ~0.5KB for a performance hit of about | |
* 30%. | |
* | |
* Uncomment to enable the smaller implementation of SHA256. | |
*/ | |
//#define MBEDTLS_SHA256_SMALLER | |
/** | |
* \def MBEDTLS_SSL_ALL_ALERT_MESSAGES | |
* | |
* Enable sending of alert messages in case of encountered errors as per RFC. | |
* If you choose not to send the alert messages, mbed TLS can still communicate | |
* with other servers, only debugging of failures is harder. | |
* | |
* The advantage of not sending alert messages, is that no information is given | |
* about reasons for failures thus preventing adversaries of gaining intel. | |
* | |
* Enable sending of all alert messages | |
*/ | |
#define MBEDTLS_SSL_ALL_ALERT_MESSAGES | |
/** | |
* \def MBEDTLS_SSL_ASYNC_PRIVATE | |
* | |
* Enable asynchronous external private key operations in SSL. This allows | |
* you to configure an SSL connection to call an external cryptographic | |
* module to perform private key operations instead of performing the | |
* operation inside the library. | |
* | |
*/ | |
//#define MBEDTLS_SSL_ASYNC_PRIVATE | |
/** | |
* \def MBEDTLS_SSL_DEBUG_ALL | |
* | |
* Enable the debug messages in SSL module for all issues. | |
* Debug messages have been disabled in some places to prevent timing | |
* attacks due to (unbalanced) debugging function calls. | |
* | |
* If you need all error reporting you should enable this during debugging, | |
* but remove this for production servers that should log as well. | |
* | |
* Uncomment this macro to report all debug messages on errors introducing | |
* a timing side-channel. | |
* | |
*/ | |
//#define MBEDTLS_SSL_DEBUG_ALL | |
/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC | |
* | |
* Enable support for Encrypt-then-MAC, RFC 7366. | |
* | |
* This allows peers that both support it to use a more robust protection for | |
* ciphersuites using CBC, providing deep resistance against timing attacks | |
* on the padding or underlying cipher. | |
* | |
* This only affects CBC ciphersuites, and is useless if none is defined. | |
* | |
* Requires: MBEDTLS_SSL_PROTO_TLS1 or | |
* MBEDTLS_SSL_PROTO_TLS1_1 or | |
* MBEDTLS_SSL_PROTO_TLS1_2 | |
* | |
* Comment this macro to disable support for Encrypt-then-MAC | |
*/ | |
#define MBEDTLS_SSL_ENCRYPT_THEN_MAC | |
/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET | |
* | |
* Enable support for Extended Master Secret, aka Session Hash | |
* (draft-ietf-tls-session-hash-02). | |
* | |
* This was introduced as "the proper fix" to the Triple Handshake familiy of | |
* attacks, but it is recommended to always use it (even if you disable | |
* renegotiation), since it actually fixes a more fundamental issue in the | |
* original SSL/TLS design, and has implications beyond Triple Handshake. | |
* | |
* Requires: MBEDTLS_SSL_PROTO_TLS1 or | |
* MBEDTLS_SSL_PROTO_TLS1_1 or | |
* MBEDTLS_SSL_PROTO_TLS1_2 | |
* | |
* Comment this macro to disable support for Extended Master Secret. | |
*/ | |
#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET | |
/** | |
* \def MBEDTLS_SSL_FALLBACK_SCSV | |
* | |
* Enable support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv-00). | |
* | |
* For servers, it is recommended to always enable this, unless you support | |
* only one version of TLS, or know for sure that none of your clients | |
* implements a fallback strategy. | |
* | |
* For clients, you only need this if you're using a fallback strategy, which | |
* is not recommended in the first place, unless you absolutely need it to | |
* interoperate with buggy (version-intolerant) servers. | |
* | |
* Comment this macro to disable support for FALLBACK_SCSV | |
*/ | |
#define MBEDTLS_SSL_FALLBACK_SCSV | |
/** | |
* \def MBEDTLS_SSL_HW_RECORD_ACCEL | |
* | |
* Enable hooking functions in SSL module for hardware acceleration of | |
* individual records. | |
* | |
* Uncomment this macro to enable hooking functions. | |
*/ | |
//#define MBEDTLS_SSL_HW_RECORD_ACCEL | |
/** | |
* \def MBEDTLS_SSL_CBC_RECORD_SPLITTING | |
* | |
* Enable 1/n-1 record splitting for CBC mode in SSLv3 and TLS 1.0. | |
* | |
* This is a countermeasure to the BEAST attack, which also minimizes the risk | |
* of interoperability issues compared to sending 0-length records. | |
* | |
* Comment this macro to disable 1/n-1 record splitting. | |
*/ | |
#define MBEDTLS_SSL_CBC_RECORD_SPLITTING | |
/** | |
* \def MBEDTLS_SSL_RENEGOTIATION | |
* | |
* Disable support for TLS renegotiation. | |
* | |
* The two main uses of renegotiation are (1) refresh keys on long-lived | |
* connections and (2) client authentication after the initial handshake. | |
* If you don't need renegotiation, it's probably better to disable it, since | |
* it has been associated with security issues in the past and is easy to | |
* misuse/misunderstand. | |
* | |
* Comment this to disable support for renegotiation. | |
* | |
* \note Even if this option is disabled, both client and server are aware | |
* of the Renegotiation Indication Extension (RFC 5746) used to | |
* prevent the SSL renegotiation attack (see RFC 5746 Sect. 1). | |
* (See \c mbedtls_ssl_conf_legacy_renegotiation for the | |
* configuration of this extension). | |
* | |
*/ | |
#define MBEDTLS_SSL_RENEGOTIATION | |
/** | |
* \def MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO | |
* | |
* Enable support for receiving and parsing SSLv2 Client Hello messages for the | |
* SSL Server module (MBEDTLS_SSL_SRV_C). | |
* | |
* Uncomment this macro to enable support for SSLv2 Client Hello messages. | |
*/ | |
//#define MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO | |
/** | |
* \def MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE | |
* | |
* Pick the ciphersuite according to the client's preferences rather than ours | |
* in the SSL Server module (MBEDTLS_SSL_SRV_C). | |
* | |
* Uncomment this macro to respect client's ciphersuite order | |
*/ | |
//#define MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE | |
/** | |
* \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH | |
* | |
* Enable support for RFC 6066 max_fragment_length extension in SSL. | |
* | |
* Comment this macro to disable support for the max_fragment_length extension | |
*/ | |
#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH | |
/** | |
* \def MBEDTLS_SSL_PROTO_SSL3 | |
* | |
* Enable support for SSL 3.0. | |
* | |
* Requires: MBEDTLS_MD5_C | |
* MBEDTLS_SHA1_C | |
* | |
* Comment this macro to disable support for SSL 3.0 | |
*/ | |
//#define MBEDTLS_SSL_PROTO_SSL3 | |
/** | |
* \def MBEDTLS_SSL_PROTO_TLS1 | |
* | |
* Enable support for TLS 1.0. | |
* | |
* Requires: MBEDTLS_MD5_C | |
* MBEDTLS_SHA1_C | |
* | |
* Comment this macro to disable support for TLS 1.0 | |
*/ | |
#define MBEDTLS_SSL_PROTO_TLS1 | |
/** | |
* \def MBEDTLS_SSL_PROTO_TLS1_1 | |
* | |
* Enable support for TLS 1.1 (and DTLS 1.0 if DTLS is enabled). | |
* | |
* Requires: MBEDTLS_MD5_C | |
* MBEDTLS_SHA1_C | |
* | |
* Comment this macro to disable support for TLS 1.1 / DTLS 1.0 | |
*/ | |
#define MBEDTLS_SSL_PROTO_TLS1_1 | |
/** | |
* \def MBEDTLS_SSL_PROTO_TLS1_2 | |
* | |
* Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled). | |
* | |
* Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C | |
* (Depends on ciphersuites) | |
* | |
* Comment this macro to disable support for TLS 1.2 / DTLS 1.2 | |
*/ | |
#define MBEDTLS_SSL_PROTO_TLS1_2 | |
/** | |
* \def MBEDTLS_SSL_PROTO_DTLS | |
* | |
* Enable support for DTLS (all available versions). | |
* | |
* Enable this and MBEDTLS_SSL_PROTO_TLS1_1 to enable DTLS 1.0, | |
* and/or this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2. | |
* | |
* Requires: MBEDTLS_SSL_PROTO_TLS1_1 | |
* or MBEDTLS_SSL_PROTO_TLS1_2 | |
* | |
* Comment this macro to disable support for DTLS | |
*/ | |
#define MBEDTLS_SSL_PROTO_DTLS | |
/** | |
* \def MBEDTLS_SSL_ALPN | |
* | |
* Enable support for RFC 7301 Application Layer Protocol Negotiation. | |
* | |
* Comment this macro to disable support for ALPN. | |
*/ | |
#define MBEDTLS_SSL_ALPN | |
/** | |
* \def MBEDTLS_SSL_DTLS_ANTI_REPLAY | |
* | |
* Enable support for the anti-replay mechanism in DTLS. | |
* | |
* Requires: MBEDTLS_SSL_TLS_C | |
* MBEDTLS_SSL_PROTO_DTLS | |
* | |
* \warning Disabling this is often a security risk! | |
* See mbedtls_ssl_conf_dtls_anti_replay() for details. | |
* | |
* Comment this to disable anti-replay in DTLS. | |
*/ | |
#define MBEDTLS_SSL_DTLS_ANTI_REPLAY | |
/** | |
* \def MBEDTLS_SSL_DTLS_HELLO_VERIFY | |
* | |
* Enable support for HelloVerifyRequest on DTLS servers. | |
* | |
* This feature is highly recommended to prevent DTLS servers being used as | |
* amplifiers in DoS attacks against other hosts. It should always be enabled | |
* unless you know for sure amplification cannot be a problem in the | |
* environment in which your server operates. | |
* | |
* \warning Disabling this can ba a security risk! (see above) | |
* | |
* Requires: MBEDTLS_SSL_PROTO_DTLS | |
* | |
* Comment this to disable support for HelloVerifyRequest. | |
*/ | |
#define MBEDTLS_SSL_DTLS_HELLO_VERIFY | |
/** | |
* \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE | |
* | |
* Enable server-side support for clients that reconnect from the same port. | |
* | |
* Some clients unexpectedly close the connection and try to reconnect using the | |
* same source port. This needs special support from the server to handle the | |
* new connection securely, as described in section 4.2.8 of RFC 6347. This | |
* flag enables that support. | |
* | |
* Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY | |
* | |
* Comment this to disable support for clients reusing the source port. | |
*/ | |
#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE | |
/** | |
* \def MBEDTLS_SSL_DTLS_BADMAC_LIMIT | |
* | |
* Enable support for a limit of records with bad MAC. | |
* | |
* See mbedtls_ssl_conf_dtls_badmac_limit(). | |
* | |
* Requires: MBEDTLS_SSL_PROTO_DTLS | |
*/ | |
#define MBEDTLS_SSL_DTLS_BADMAC_LIMIT | |
/** | |
* \def MBEDTLS_SSL_SESSION_TICKETS | |
* | |
* Enable support for RFC 5077 session tickets in SSL. | |
* Client-side, provides full support for session tickets (maintainance of a | |
* session store remains the responsibility of the application, though). | |
* Server-side, you also need to provide callbacks for writing and parsing | |
* tickets, including authenticated encryption and key management. Example | |
* callbacks are provided by MBEDTLS_SSL_TICKET_C. | |
* | |
* Comment this macro to disable support for SSL session tickets | |
*/ | |
#define MBEDTLS_SSL_SESSION_TICKETS | |
/** | |
* \def MBEDTLS_SSL_EXPORT_KEYS | |
* | |
* Enable support for exporting key block and master secret. | |
* This is required for certain users of TLS, e.g. EAP-TLS. | |
* | |
* Comment this macro to disable support for key export | |
*/ | |
#define MBEDTLS_SSL_EXPORT_KEYS | |
/** | |
* \def MBEDTLS_SSL_SERVER_NAME_INDICATION | |
* | |
* Enable support for RFC 6066 server name indication (SNI) in SSL. | |
* | |
* Requires: MBEDTLS_X509_CRT_PARSE_C | |
* | |
* Comment this macro to disable support for server name indication in SSL | |
*/ | |
#define MBEDTLS_SSL_SERVER_NAME_INDICATION | |
/** | |
* \def MBEDTLS_SSL_TRUNCATED_HMAC | |
* | |
* Enable support for RFC 6066 truncated HMAC in SSL. | |
* | |
* Comment this macro to disable support for truncated HMAC in SSL | |
*/ | |
#define MBEDTLS_SSL_TRUNCATED_HMAC | |
/** | |
* \def MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT | |
* | |
* Fallback to old (pre-2.7), non-conforming implementation of the truncated | |
* HMAC extension which also truncates the HMAC key. Note that this option is | |
* only meant for a transitory upgrade period and is likely to be removed in | |
* a future version of the library. | |
* | |
* \warning The old implementation is non-compliant and has a security weakness | |
* (2^80 brute force attack on the HMAC key used for a single, | |
* uninterrupted connection). This should only be enabled temporarily | |
* when (1) the use of truncated HMAC is essential in order to save | |
* bandwidth, and (2) the peer is an Mbed TLS stack that doesn't use | |
* the fixed implementation yet (pre-2.7). | |
* | |
* \deprecated This option is deprecated and will likely be removed in a | |
* future version of Mbed TLS. | |
* | |
* Uncomment to fallback to old, non-compliant truncated HMAC implementation. | |
* | |
* Requires: MBEDTLS_SSL_TRUNCATED_HMAC | |
*/ | |
//#define MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT | |
/** | |
* \def MBEDTLS_THREADING_ALT | |
* | |
* Provide your own alternate threading implementation. | |
* | |
* Requires: MBEDTLS_THREADING_C | |
* | |
* Uncomment this to allow your own alternate threading implementation. | |
*/ | |
//#define MBEDTLS_THREADING_ALT | |
/** | |
* \def MBEDTLS_THREADING_PTHREAD | |
* | |
* Enable the pthread wrapper layer for the threading layer. | |
* | |
* Requires: MBEDTLS_THREADING_C | |
* | |
* Uncomment this to enable pthread mutexes. | |
*/ | |
//#define MBEDTLS_THREADING_PTHREAD | |
/** | |
* \def MBEDTLS_VERSION_FEATURES | |
* | |
* Allow run-time checking of compile-time enabled features. Thus allowing users | |
* to check at run-time if the library is for instance compiled with threading | |
* support via mbedtls_version_check_feature(). | |
* | |
* Requires: MBEDTLS_VERSION_C | |
* | |
* Comment this to disable run-time checking and save ROM space | |
*/ | |
#define MBEDTLS_VERSION_FEATURES | |
/** | |
* \def MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 | |
* | |
* If set, the X509 parser will not break-off when parsing an X509 certificate | |
* and encountering an extension in a v1 or v2 certificate. | |
* | |
* Uncomment to prevent an error. | |
*/ | |
//#define MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 | |
/** | |
* \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION | |
* | |
* If set, the X509 parser will not break-off when parsing an X509 certificate | |
* and encountering an unknown critical extension. | |
* | |
* \warning Depending on your PKI use, enabling this can be a security risk! | |
* | |
* Uncomment to prevent an error. | |
*/ | |
//#define MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION | |
/** | |
* \def MBEDTLS_X509_CHECK_KEY_USAGE | |
* | |
* Enable verification of the keyUsage extension (CA and leaf certificates). | |
* | |
* Disabling this avoids problems with mis-issued and/or misused | |
* (intermediate) CA and leaf certificates. | |
* | |
* \warning Depending on your PKI use, disabling this can be a security risk! | |
* | |
* Comment to skip keyUsage checking for both CA and leaf certificates. | |
*/ | |
#define MBEDTLS_X509_CHECK_KEY_USAGE | |
/** | |
* \def MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE | |
* | |
* Enable verification of the extendedKeyUsage extension (leaf certificates). | |
* | |
* Disabling this avoids problems with mis-issued and/or misused certificates. | |
* | |
* \warning Depending on your PKI use, disabling this can be a security risk! | |
* | |
* Comment to skip extendedKeyUsage checking for certificates. | |
*/ | |
#define MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE | |
/** | |
* \def MBEDTLS_X509_RSASSA_PSS_SUPPORT | |
* | |
* Enable parsing and verification of X.509 certificates, CRLs and CSRS | |
* signed with RSASSA-PSS (aka PKCS#1 v2.1). | |
* | |
* Comment this macro to disallow using RSASSA-PSS in certificates. | |
*/ | |
#define MBEDTLS_X509_RSASSA_PSS_SUPPORT | |
/** | |
* \def MBEDTLS_ZLIB_SUPPORT | |
* | |
* If set, the SSL/TLS module uses ZLIB to support compression and | |
* decompression of packet data. | |
* | |
* \warning TLS-level compression MAY REDUCE SECURITY! See for example the | |
* CRIME attack. Before enabling this option, you should examine with care if | |
* CRIME or similar exploits may be a applicable to your use case. | |
* | |
* \note Currently compression can't be used with DTLS. | |
* | |
* \deprecated This feature is deprecated and will be removed | |
* in the next major revision of the library. | |
* | |
* Used in: library/ssl_tls.c | |
* library/ssl_cli.c | |
* library/ssl_srv.c | |
* | |
* This feature requires zlib library and headers to be present. | |
* | |
* Uncomment to enable use of ZLIB | |
*/ | |
//#define MBEDTLS_ZLIB_SUPPORT | |
/* \} name SECTION: mbed TLS feature support */ | |
/** | |
* \name SECTION: mbed TLS modules | |
* | |
* This section enables or disables entire modules in mbed TLS | |
* \{ | |
*/ | |
/** | |
* \def MBEDTLS_AESNI_C | |
* | |
* Enable AES-NI support on x86-64. | |
* | |
* Module: library/aesni.c | |
* Caller: library/aes.c | |
* | |
* Requires: MBEDTLS_HAVE_ASM | |
* | |
* This modules adds support for the AES-NI instructions on x86-64 | |
*/ | |
#define MBEDTLS_AESNI_C | |
/** | |
* \def MBEDTLS_AES_C | |
* | |
* Enable the AES block cipher. | |
* | |
* Module: library/aes.c | |
* Caller: library/cipher.c | |
* library/pem.c | |
* library/ctr_drbg.c | |
* | |
* This module enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA | |
* MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 | |
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 | |
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA | |
* MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 | |
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 | |
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA | |
* | |
* PEM_PARSE uses AES for decrypting encrypted keys. | |
*/ | |
#define MBEDTLS_AES_C | |
/** | |
* \def MBEDTLS_ARC4_C | |
* | |
* Enable the ARCFOUR stream cipher. | |
* | |
* Module: library/arc4.c | |
* Caller: library/cipher.c | |
* | |
* This module enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA | |
* MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA | |
* MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA | |
* MBEDTLS_TLS_RSA_WITH_RC4_128_SHA | |
* MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 | |
* MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA | |
* MBEDTLS_TLS_PSK_WITH_RC4_128_SHA | |
* | |
* \warning ARC4 is considered a weak cipher and its use constitutes a | |
* security risk. If possible, we recommend avoidng dependencies on | |
* it, and considering stronger ciphers instead. | |
* | |
*/ | |
#define MBEDTLS_ARC4_C | |
/** | |
* \def MBEDTLS_ASN1_PARSE_C | |
* | |
* Enable the generic ASN1 parser. | |
* | |
* Module: library/asn1.c | |
* Caller: library/x509.c | |
* library/dhm.c | |
* library/pkcs12.c | |
* library/pkcs5.c | |
* library/pkparse.c | |
*/ | |
#define MBEDTLS_ASN1_PARSE_C | |
/** | |
* \def MBEDTLS_ASN1_WRITE_C | |
* | |
* Enable the generic ASN1 writer. | |
* | |
* Module: library/asn1write.c | |
* Caller: library/ecdsa.c | |
* library/pkwrite.c | |
* library/x509_create.c | |
* library/x509write_crt.c | |
* library/x509write_csr.c | |
*/ | |
#define MBEDTLS_ASN1_WRITE_C | |
/** | |
* \def MBEDTLS_BASE64_C | |
* | |
* Enable the Base64 module. | |
* | |
* Module: library/base64.c | |
* Caller: library/pem.c | |
* | |
* This module is required for PEM support (required by X.509). | |
*/ | |
#define MBEDTLS_BASE64_C | |
/** | |
* \def MBEDTLS_BIGNUM_C | |
* | |
* Enable the multi-precision integer library. | |
* | |
* Module: library/bignum.c | |
* Caller: library/dhm.c | |
* library/ecp.c | |
* library/ecdsa.c | |
* library/rsa.c | |
* library/rsa_internal.c | |
* library/ssl_tls.c | |
* | |
* This module is required for RSA, DHM and ECC (ECDH, ECDSA) support. | |
*/ | |
#define MBEDTLS_BIGNUM_C | |
/** | |
* \def MBEDTLS_BLOWFISH_C | |
* | |
* Enable the Blowfish block cipher. | |
* | |
* Module: library/blowfish.c | |
*/ | |
#define MBEDTLS_BLOWFISH_C | |
/** | |
* \def MBEDTLS_CAMELLIA_C | |
* | |
* Enable the Camellia block cipher. | |
* | |
* Module: library/camellia.c | |
* Caller: library/cipher.c | |
* | |
* This module enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA | |
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA | |
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 | |
*/ | |
#define MBEDTLS_CAMELLIA_C | |
/** | |
* \def MBEDTLS_ARIA_C | |
* | |
* Enable the ARIA block cipher. | |
* | |
* Module: library/aria.c | |
* Caller: library/cipher.c | |
* | |
* This module enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* | |
* MBEDTLS_TLS_RSA_WITH_ARIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_ARIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_RSA_WITH_ARIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_RSA_WITH_ARIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_PSK_WITH_ARIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_PSK_WITH_ARIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_CBC_SHA384 | |
* MBEDTLS_TLS_PSK_WITH_ARIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_PSK_WITH_ARIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_GCM_SHA256 | |
* MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_GCM_SHA384 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_128_CBC_SHA256 | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_256_CBC_SHA384 | |
*/ | |
//#define MBEDTLS_ARIA_C | |
/** | |
* \def MBEDTLS_CCM_C | |
* | |
* Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher. | |
* | |
* Module: library/ccm.c | |
* | |
* Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C | |
* | |
* This module enables the AES-CCM ciphersuites, if other requisites are | |
* enabled as well. | |
*/ | |
#define MBEDTLS_CCM_C | |
/** | |
* \def MBEDTLS_CERTS_C | |
* | |
* Enable the test certificates. | |
* | |
* Module: library/certs.c | |
* Caller: | |
* | |
* This module is used for testing (ssl_client/server). | |
*/ | |
#define MBEDTLS_CERTS_C | |
/** | |
* \def MBEDTLS_CHACHA20_C | |
* | |
* Enable the ChaCha20 stream cipher. | |
* | |
* Module: library/chacha20.c | |
*/ | |
#define MBEDTLS_CHACHA20_C | |
/** | |
* \def MBEDTLS_CHACHAPOLY_C | |
* | |
* Enable the ChaCha20-Poly1305 AEAD algorithm. | |
* | |
* Module: library/chachapoly.c | |
* | |
* This module requires: MBEDTLS_CHACHA20_C, MBEDTLS_POLY1305_C | |
*/ | |
#define MBEDTLS_CHACHAPOLY_C | |
/** | |
* \def MBEDTLS_CIPHER_C | |
* | |
* Enable the generic cipher layer. | |
* | |
* Module: library/cipher.c | |
* Caller: library/ssl_tls.c | |
* | |
* Uncomment to enable generic cipher wrappers. | |
*/ | |
#define MBEDTLS_CIPHER_C | |
/** | |
* \def MBEDTLS_CMAC_C | |
* | |
* Enable the CMAC (Cipher-based Message Authentication Code) mode for block | |
* ciphers. | |
* | |
* Module: library/cmac.c | |
* | |
* Requires: MBEDTLS_AES_C or MBEDTLS_DES_C | |
* | |
*/ | |
#define MBEDTLS_CMAC_C | |
/** | |
* \def MBEDTLS_CTR_DRBG_C | |
* | |
* Enable the CTR_DRBG AES-256-based random generator. | |
* | |
* Module: library/ctr_drbg.c | |
* Caller: | |
* | |
* Requires: MBEDTLS_AES_C | |
* | |
* This module provides the CTR_DRBG AES-256 random number generator. | |
*/ | |
#define MBEDTLS_CTR_DRBG_C | |
/** | |
* \def MBEDTLS_DEBUG_C | |
* | |
* Enable the debug functions. | |
* | |
* Module: library/debug.c | |
* Caller: library/ssl_cli.c | |
* library/ssl_srv.c | |
* library/ssl_tls.c | |
* | |
* This module provides debugging functions. | |
*/ | |
#define MBEDTLS_DEBUG_C | |
/** | |
* \def MBEDTLS_DES_C | |
* | |
* Enable the DES block cipher. | |
* | |
* Module: library/des.c | |
* Caller: library/pem.c | |
* library/cipher.c | |
* | |
* This module enables the following ciphersuites (if other requisites are | |
* enabled as well): | |
* MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA | |
* MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA | |
* | |
* PEM_PARSE uses DES/3DES for decrypting encrypted keys. | |
* | |
* \warning DES is considered a weak cipher and its use constitutes a | |
* security risk. We recommend considering stronger ciphers instead. | |
*/ | |
#define MBEDTLS_DES_C | |
/** | |
* \def MBEDTLS_DHM_C | |
* | |
* Enable the Diffie-Hellman-Merkle module. | |
* | |
* Module: library/dhm.c | |
* Caller: library/ssl_cli.c | |
* library/ssl_srv.c | |
* | |
* This module is used by the following key exchanges: | |
* DHE-RSA, DHE-PSK | |
* | |
* \warning Using DHE constitutes a security risk as it | |
* is not possible to validate custom DH parameters. | |
* If possible, it is recommended users should consider | |
* preferring other methods of key exchange. | |
* See dhm.h for more details. | |
* | |
*/ | |
#define MBEDTLS_DHM_C | |
/** | |
* \def MBEDTLS_ECDH_C | |
* | |
* Enable the elliptic curve Diffie-Hellman library. | |
* | |
* Module: library/ecdh.c | |
* Caller: library/ssl_cli.c | |
* library/ssl_srv.c | |
* | |
* This module is used by the following key exchanges: | |
* ECDHE-ECDSA, ECDHE-RSA, DHE-PSK | |
* | |
* Requires: MBEDTLS_ECP_C | |
*/ | |
#define MBEDTLS_ECDH_C | |
/** | |
* \def MBEDTLS_ECDSA_C | |
* | |
* Enable the elliptic curve DSA library. | |
* | |
* Module: library/ecdsa.c | |
* Caller: | |
* | |
* This module is used by the following key exchanges: | |
* ECDHE-ECDSA | |
* | |
* Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C | |
*/ | |
#define MBEDTLS_ECDSA_C | |
/** | |
* \def MBEDTLS_ECJPAKE_C | |
* | |
* Enable the elliptic curve J-PAKE library. | |
* | |
* \warning This is currently experimental. EC J-PAKE support is based on the | |
* Thread v1.0.0 specification; incompatible changes to the specification | |
* might still happen. For this reason, this is disabled by default. | |
* | |
* Module: library/ecjpake.c | |
* Caller: | |
* | |
* This module is used by the following key exchanges: | |
* ECJPAKE | |
* | |
* Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C | |
*/ | |
//#define MBEDTLS_ECJPAKE_C | |
/** | |
* \def MBEDTLS_ECP_C | |
* | |
* Enable the elliptic curve over GF(p) library. | |
* | |
* Module: library/ecp.c | |
* Caller: library/ecdh.c | |
* library/ecdsa.c | |
* library/ecjpake.c | |
* | |
* Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED | |
*/ | |
#define MBEDTLS_ECP_C | |
/** | |
* \def MBEDTLS_ENTROPY_C | |
* | |
* Enable the platform-specific entropy code. | |
* | |
* Module: library/entropy.c | |
* Caller: | |
* | |
* Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C | |
* | |
* This module provides a generic entropy pool | |
*/ | |
#define MBEDTLS_ENTROPY_C | |
/** | |
* \def MBEDTLS_ERROR_C | |
* | |
* Enable error code to error string conversion. | |
* | |
* Module: library/error.c | |
* Caller: | |
* | |
* This module enables mbedtls_strerror(). | |
*/ | |
#define MBEDTLS_ERROR_C | |
/** | |
* \def MBEDTLS_GCM_C | |
* | |
* Enable the Galois/Counter Mode (GCM) for AES. | |
* | |
* Module: library/gcm.c | |
* | |
* Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C | |
* | |
* This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other | |
* requisites are enabled as well. | |
*/ | |
#define MBEDTLS_GCM_C | |
/** | |
* \def MBEDTLS_HAVEGE_C | |
* | |
* Enable the HAVEGE random generator. | |
* | |
* Warning: the HAVEGE random generator is not suitable for virtualized | |
* environments | |
* | |
* Warning: the HAVEGE random generator is dependent on timing and specific | |
* processor traits. It is therefore not advised to use HAVEGE as | |
* your applications primary random generator or primary entropy pool | |
* input. As a secondary input to your entropy pool, it IS able add | |
* the (limited) extra entropy it provides. | |
* | |
* Module: library/havege.c | |
* Caller: | |
* | |
* Requires: MBEDTLS_TIMING_C | |
* | |
* Uncomment to enable the HAVEGE random generator. | |
*/ | |
//#define MBEDTLS_HAVEGE_C | |
/** | |
* \def MBEDTLS_HKDF_C | |
* | |
* Enable the HKDF algorithm (RFC 5869). | |
* | |
* Module: library/hkdf.c | |
* Caller: | |
* | |
* Requires: MBEDTLS_MD_C | |
* | |
* This module adds support for the Hashed Message Authentication Code | |
* (HMAC)-based key derivation function (HKDF). | |
*/ | |
#define MBEDTLS_HKDF_C | |
/** | |
* \def MBEDTLS_HMAC_DRBG_C | |
* | |
* Enable the HMAC_DRBG random generator. | |
* | |
* Module: library/hmac_drbg.c | |
* Caller: | |
* | |
* Requires: MBEDTLS_MD_C | |
* | |
* Uncomment to enable the HMAC_DRBG random number geerator. | |
*/ | |
#define MBEDTLS_HMAC_DRBG_C | |
/** | |
* \def MBEDTLS_NIST_KW_C | |
* | |
* Enable the Key Wrapping mode for 128-bit block ciphers, | |
* as defined in NIST SP 800-38F. Only KW and KWP modes | |
* are supported. At the moment, only AES is approved by NIST. | |
* | |
* Module: library/nist_kw.c | |
* | |
* Requires: MBEDTLS_AES_C and MBEDTLS_CIPHER_C | |
*/ | |
//#define MBEDTLS_NIST_KW_C | |
/** | |
* \def MBEDTLS_MD_C | |
* | |
* Enable the generic message digest layer. | |
* | |
* Module: library/md.c | |
* Caller: | |
* | |
* Uncomment to enable generic message digest wrappers. | |
*/ | |
#define MBEDTLS_MD_C | |
/** | |
* \def MBEDTLS_MD2_C | |
* | |
* Enable the MD2 hash algorithm. | |
* | |
* Module: library/md2.c | |
* Caller: | |
* | |
* Uncomment to enable support for (rare) MD2-signed X.509 certs. | |
* | |
* \warning MD2 is considered a weak message digest and its use constitutes a | |
* security risk. If possible, we recommend avoiding dependencies on | |
* it, and considering stronger message digests instead. | |
* | |
*/ | |
//#define MBEDTLS_MD2_C | |
/** | |
* \def MBEDTLS_MD4_C | |
* | |
* Enable the MD4 hash algorithm. | |
* | |
* Module: library/md4.c | |
* Caller: | |
* | |
* Uncomment to enable support for (rare) MD4-signed X.509 certs. | |
* | |
* \warning MD4 is considered a weak message digest and its use constitutes a | |
* security risk. If possible, we recommend avoiding dependencies on | |
* it, and considering stronger message digests instead. | |
* | |
*/ | |
//#define MBEDTLS_MD4_C | |
/** | |
* \def MBEDTLS_MD5_C | |
* | |
* Enable the MD5 hash algorithm. | |
* | |
* Module: library/md5.c | |
* Caller: library/md.c | |
* library/pem.c | |
* library/ssl_tls.c | |
* | |
* This module is required for SSL/TLS up to version 1.1, and for TLS 1.2 | |
* depending on the handshake parameters. Further, it is used for checking | |
* MD5-signed certificates, and for PBKDF1 when decrypting PEM-encoded | |
* encrypted keys. | |
* | |
* \warning MD5 is considered a weak message digest and its use constitutes a | |
* security risk. If possible, we recommend avoiding dependencies on | |
* it, and considering stronger message digests instead. | |
* | |
*/ | |
#define MBEDTLS_MD5_C | |
/** | |
* \def MBEDTLS_MEMORY_BUFFER_ALLOC_C | |
* | |
* Enable the buffer allocator implementation that makes use of a (stack) | |
* based buffer to 'allocate' dynamic memory. (replaces calloc() and free() | |
* calls) | |
* | |
* Module: library/memory_buffer_alloc.c | |
* | |
* Requires: MBEDTLS_PLATFORM_C | |
* MBEDTLS_PLATFORM_MEMORY (to use it within mbed TLS) | |
* | |
* Enable this module to enable the buffer memory allocator. | |
*/ | |
//#define MBEDTLS_MEMORY_BUFFER_ALLOC_C | |
/** | |
* \def MBEDTLS_NET_C | |
* | |
* Enable the TCP and UDP over IPv6/IPv4 networking routines. | |
* | |
* \note This module only works on POSIX/Unix (including Linux, BSD and OS X) | |
* and Windows. For other platforms, you'll want to disable it, and write your | |
* own networking callbacks to be passed to \c mbedtls_ssl_set_bio(). | |
* | |
* \note See also our Knowledge Base article about porting to a new | |
* environment: | |
* https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS | |
* | |
* Module: library/net_sockets.c | |
* | |
* This module provides networking routines. | |
*/ | |
#define MBEDTLS_NET_C | |
/** | |
* \def MBEDTLS_OID_C | |
* | |
* Enable the OID database. | |
* | |
* Module: library/oid.c | |
* Caller: library/asn1write.c | |
* library/pkcs5.c | |
* library/pkparse.c | |
* library/pkwrite.c | |
* library/rsa.c | |
* library/x509.c | |
* library/x509_create.c | |
* library/x509_crl.c | |
* library/x509_crt.c | |
* library/x509_csr.c | |
* library/x509write_crt.c | |
* library/x509write_csr.c | |
* | |
* This modules translates between OIDs and internal values. | |
*/ | |
#define MBEDTLS_OID_C | |
/** | |
* \def MBEDTLS_PADLOCK_C | |
* | |
* Enable VIA Padlock support on x86. | |
* | |
* Module: library/padlock.c | |
* Caller: library/aes.c | |
* | |
* Requires: MBEDTLS_HAVE_ASM | |
* | |
* This modules adds support for the VIA PadLock on x86. | |
*/ | |
#define MBEDTLS_PADLOCK_C | |
/** | |
* \def MBEDTLS_PEM_PARSE_C | |
* | |
* Enable PEM decoding / parsing. | |
* | |
* Module: library/pem.c | |
* Caller: library/dhm.c | |
* library/pkparse.c | |
* library/x509_crl.c | |
* library/x509_crt.c | |
* library/x509_csr.c | |
* | |
* Requires: MBEDTLS_BASE64_C | |
* | |
* This modules adds support for decoding / parsing PEM files. | |
*/ | |
#define MBEDTLS_PEM_PARSE_C | |
/** | |
* \def MBEDTLS_PEM_WRITE_C | |
* | |
* Enable PEM encoding / writing. | |
* | |
* Module: library/pem.c | |
* Caller: library/pkwrite.c | |
* library/x509write_crt.c | |
* library/x509write_csr.c | |
* | |
* Requires: MBEDTLS_BASE64_C | |
* | |
* This modules adds support for encoding / writing PEM files. | |
*/ | |
#define MBEDTLS_PEM_WRITE_C | |
/** | |
* \def MBEDTLS_PK_C | |
* | |
* Enable the generic public (asymetric) key layer. | |
* | |
* Module: library/pk.c | |
* Caller: library/ssl_tls.c | |
* library/ssl_cli.c | |
* library/ssl_srv.c | |
* | |
* Requires: MBEDTLS_RSA_C or MBEDTLS_ECP_C | |
* | |
* Uncomment to enable generic public key wrappers. | |
*/ | |
#define MBEDTLS_PK_C | |
/** | |
* \def MBEDTLS_PK_PARSE_C | |
* | |
* Enable the generic public (asymetric) key parser. | |
* | |
* Module: library/pkparse.c | |
* Caller: library/x509_crt.c | |
* library/x509_csr.c | |
* | |
* Requires: MBEDTLS_PK_C | |
* | |
* Uncomment to enable generic public key parse functions. | |
*/ | |
#define MBEDTLS_PK_PARSE_C | |
/** | |
* \def MBEDTLS_PK_WRITE_C | |
* | |
* Enable the generic public (asymetric) key writer. | |
* | |
* Module: library/pkwrite.c | |
* Caller: library/x509write.c | |
* | |
* Requires: MBEDTLS_PK_C | |
* | |
* Uncomment to enable generic public key write functions. | |
*/ | |
#define MBEDTLS_PK_WRITE_C | |
/** | |
* \def MBEDTLS_PKCS5_C | |
* | |
* Enable PKCS#5 functions. | |
* | |
* Module: library/pkcs5.c | |
* | |
* Requires: MBEDTLS_MD_C | |
* | |
* This module adds support for the PKCS#5 functions. | |
*/ | |
#define MBEDTLS_PKCS5_C | |
/** | |
* \def MBEDTLS_PKCS11_C | |
* | |
* Enable wrapper for PKCS#11 smartcard support. | |
* | |
* Module: library/pkcs11.c | |
* Caller: library/pk.c | |
* | |
* Requires: MBEDTLS_PK_C | |
* | |
* This module enables SSL/TLS PKCS #11 smartcard support. | |
* Requires the presence of the PKCS#11 helper library (libpkcs11-helper) | |
*/ | |
//#define MBEDTLS_PKCS11_C | |
/** | |
* \def MBEDTLS_PKCS12_C | |
* | |
* Enable PKCS#12 PBE functions. | |
* Adds algorithms for parsing PKCS#8 encrypted private keys | |
* | |
* Module: library/pkcs12.c | |
* Caller: library/pkparse.c | |
* | |
* Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C, MBEDTLS_MD_C | |
* Can use: MBEDTLS_ARC4_C | |
* | |
* This module enables PKCS#12 functions. | |
*/ | |
#define MBEDTLS_PKCS12_C | |
/** | |
* \def MBEDTLS_PLATFORM_C | |
* | |
* Enable the platform abstraction layer that allows you to re-assign | |
* functions like calloc(), free(), snprintf(), printf(), fprintf(), exit(). | |
* | |
* Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT | |
* or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned | |
* above to be specified at runtime or compile time respectively. | |
* | |
* \note This abstraction layer must be enabled on Windows (including MSYS2) | |
* as other module rely on it for a fixed snprintf implementation. | |
* | |
* Module: library/platform.c | |
* Caller: Most other .c files | |
* | |
* This module enables abstraction of common (libc) functions. | |
*/ | |
#define MBEDTLS_PLATFORM_C | |
/** | |
* \def MBEDTLS_POLY1305_C | |
* | |
* Enable the Poly1305 MAC algorithm. | |
* | |
* Module: library/poly1305.c | |
* Caller: library/chachapoly.c | |
*/ | |
#define MBEDTLS_POLY1305_C | |
/** | |
* \def MBEDTLS_RIPEMD160_C | |
* | |
* Enable the RIPEMD-160 hash algorithm. | |
* | |
* Module: library/ripemd160.c | |
* Caller: library/md.c | |
* | |
*/ | |
#define MBEDTLS_RIPEMD160_C | |
/** | |
* \def MBEDTLS_RSA_C | |
* | |
* Enable the RSA public-key cryptosystem. | |
* | |
* Module: library/rsa.c | |
* library/rsa_internal.c | |
* Caller: library/ssl_cli.c | |
* library/ssl_srv.c | |
* library/ssl_tls.c | |
* library/x509.c | |
* | |
* This module is used by the following key exchanges: | |
* RSA, DHE-RSA, ECDHE-RSA, RSA-PSK | |
* | |
* Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C | |
*/ | |
#define MBEDTLS_RSA_C | |
/** | |
* \def MBEDTLS_SHA1_C | |
* | |
* Enable the SHA1 cryptographic hash algorithm. | |
* | |
* Module: library/sha1.c | |
* Caller: library/md.c | |
* library/ssl_cli.c | |
* library/ssl_srv.c | |
* library/ssl_tls.c | |
* library/x509write_crt.c | |
* | |
* This module is required for SSL/TLS up to version 1.1, for TLS 1.2 | |
* depending on the handshake parameters, and for SHA1-signed certificates. | |
* | |
* \warning SHA-1 is considered a weak message digest and its use constitutes | |
* a security risk. If possible, we recommend avoiding dependencies | |
* on it, and considering stronger message digests instead. | |
* | |
*/ | |
#define MBEDTLS_SHA1_C | |
/** | |
* \def MBEDTLS_SHA256_C | |
* | |
* Enable the SHA-224 and SHA-256 cryptographic hash algorithms. | |
* | |
* Module: library/sha256.c | |
* Caller: library/entropy.c | |
* library/md.c | |
* library/ssl_cli.c | |
* library/ssl_srv.c | |
* library/ssl_tls.c | |
* | |
* This module adds support for SHA-224 and SHA-256. | |
* This module is required for the SSL/TLS 1.2 PRF function. | |
*/ | |
#define MBEDTLS_SHA256_C | |
/** | |
* \def MBEDTLS_SHA512_C | |
* | |
* Enable the SHA-384 and SHA-512 cryptographic hash algorithms. | |
* | |
* Module: library/sha512.c | |
* Caller: library/entropy.c | |
* library/md.c | |
* library/ssl_cli.c | |
* library/ssl_srv.c | |
* | |
* This module adds support for SHA-384 and SHA-512. | |
*/ | |
#define MBEDTLS_SHA512_C | |
/** | |
* \def MBEDTLS_SSL_CACHE_C | |
* | |
* Enable simple SSL cache implementation. | |
* | |
* Module: library/ssl_cache.c | |
* Caller: | |
* | |
* Requires: MBEDTLS_SSL_CACHE_C | |
*/ | |
#define MBEDTLS_SSL_CACHE_C | |
/** | |
* \def MBEDTLS_SSL_COOKIE_C | |
* | |
* Enable basic implementation of DTLS cookies for hello verification. | |
* | |
* Module: library/ssl_cookie.c | |
* Caller: | |
*/ | |
#define MBEDTLS_SSL_COOKIE_C | |
/** | |
* \def MBEDTLS_SSL_TICKET_C | |
* | |
* Enable an implementation of TLS server-side callbacks for session tickets. | |
* | |
* Module: library/ssl_ticket.c | |
* Caller: | |
* | |
* Requires: MBEDTLS_CIPHER_C | |
*/ | |
#define MBEDTLS_SSL_TICKET_C | |
/** | |
* \def MBEDTLS_SSL_CLI_C | |
* | |
* Enable the SSL/TLS client code. | |
* | |
* Module: library/ssl_cli.c | |
* Caller: | |
* | |
* Requires: MBEDTLS_SSL_TLS_C | |
* | |
* This module is required for SSL/TLS client support. | |
*/ | |
#define MBEDTLS_SSL_CLI_C | |
/** | |
* \def MBEDTLS_SSL_SRV_C | |
* | |
* Enable the SSL/TLS server code. | |
* | |
* Module: library/ssl_srv.c | |
* Caller: | |
* | |
* Requires: MBEDTLS_SSL_TLS_C | |
* | |
* This module is required for SSL/TLS server support. | |
*/ | |
#define MBEDTLS_SSL_SRV_C | |
/** | |
* \def MBEDTLS_SSL_TLS_C | |
* | |
* Enable the generic SSL/TLS code. | |
* | |
* Module: library/ssl_tls.c | |
* Caller: library/ssl_cli.c | |
* library/ssl_srv.c | |
* | |
* Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C | |
* and at least one of the MBEDTLS_SSL_PROTO_XXX defines | |
* | |
* This module is required for SSL/TLS. | |
*/ | |
#define MBEDTLS_SSL_TLS_C | |
/** | |
* \def MBEDTLS_THREADING_C | |
* | |
* Enable the threading abstraction layer. | |
* By default mbed TLS assumes it is used in a non-threaded environment or that | |
* contexts are not shared between threads. If you do intend to use contexts | |
* between threads, you will need to enable this layer to prevent race | |
* conditions. See also our Knowledge Base article about threading: | |
* https://tls.mbed.org/kb/development/thread-safety-and-multi-threading | |
* | |
* Module: library/threading.c | |
* | |
* This allows different threading implementations (self-implemented or | |
* provided). | |
* | |
* You will have to enable either MBEDTLS_THREADING_ALT or | |
* MBEDTLS_THREADING_PTHREAD. | |
* | |
* Enable this layer to allow use of mutexes within mbed TLS | |
*/ | |
//#define MBEDTLS_THREADING_C | |
/** | |
* \def MBEDTLS_TIMING_C | |
* | |
* Enable the semi-portable timing interface. | |
* | |
* \note The provided implementation only works on POSIX/Unix (including Linux, | |
* BSD and OS X) and Windows. On other platforms, you can either disable that | |
* module and provide your own implementations of the callbacks needed by | |
* \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide | |
* your own implementation of the whole module by setting | |
* \c MBEDTLS_TIMING_ALT in the current file. | |
* | |
* \note See also our Knowledge Base article about porting to a new | |
* environment: | |
* https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS | |
* | |
* Module: library/timing.c | |
* Caller: library/havege.c | |
* | |
* This module is used by the HAVEGE random number generator. | |
*/ | |
#define MBEDTLS_TIMING_C | |
/** | |
* \def MBEDTLS_VERSION_C | |
* | |
* Enable run-time version information. | |
* | |
* Module: library/version.c | |
* | |
* This module provides run-time version information. | |
*/ | |
#define MBEDTLS_VERSION_C | |
/** | |
* \def MBEDTLS_X509_USE_C | |
* | |
* Enable X.509 core for using certificates. | |
* | |
* Module: library/x509.c | |
* Caller: library/x509_crl.c | |
* library/x509_crt.c | |
* library/x509_csr.c | |
* | |
* Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, | |
* MBEDTLS_PK_PARSE_C | |
* | |
* This module is required for the X.509 parsing modules. | |
*/ | |
#define MBEDTLS_X509_USE_C | |
/** | |
* \def MBEDTLS_X509_CRT_PARSE_C | |
* | |
* Enable X.509 certificate parsing. | |
* | |
* Module: library/x509_crt.c | |
* Caller: library/ssl_cli.c | |
* library/ssl_srv.c | |
* library/ssl_tls.c | |
* | |
* Requires: MBEDTLS_X509_USE_C | |
* | |
* This module is required for X.509 certificate parsing. | |
*/ | |
#define MBEDTLS_X509_CRT_PARSE_C | |
/** | |
* \def MBEDTLS_X509_CRL_PARSE_C | |
* | |
* Enable X.509 CRL parsing. | |
* | |
* Module: library/x509_crl.c | |
* Caller: library/x509_crt.c | |
* | |
* Requires: MBEDTLS_X509_USE_C | |
* | |
* This module is required for X.509 CRL parsing. | |
*/ | |
#define MBEDTLS_X509_CRL_PARSE_C | |
/** | |
* \def MBEDTLS_X509_CSR_PARSE_C | |
* | |
* Enable X.509 Certificate Signing Request (CSR) parsing. | |
* | |
* Module: library/x509_csr.c | |
* Caller: library/x509_crt_write.c | |
* | |
* Requires: MBEDTLS_X509_USE_C | |
* | |
* This module is used for reading X.509 certificate request. | |
*/ | |
#define MBEDTLS_X509_CSR_PARSE_C | |
/** | |
* \def MBEDTLS_X509_CREATE_C | |
* | |
* Enable X.509 core for creating certificates. | |
* | |
* Module: library/x509_create.c | |
* | |
* Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C | |
* | |
* This module is the basis for creating X.509 certificates and CSRs. | |
*/ | |
#define MBEDTLS_X509_CREATE_C | |
/** | |
* \def MBEDTLS_X509_CRT_WRITE_C | |
* | |
* Enable creating X.509 certificates. | |
* | |
* Module: library/x509_crt_write.c | |
* | |
* Requires: MBEDTLS_X509_CREATE_C | |
* | |
* This module is required for X.509 certificate creation. | |
*/ | |
#define MBEDTLS_X509_CRT_WRITE_C | |
/** | |
* \def MBEDTLS_X509_CSR_WRITE_C | |
* | |
* Enable creating X.509 Certificate Signing Requests (CSR). | |
* | |
* Module: library/x509_csr_write.c | |
* | |
* Requires: MBEDTLS_X509_CREATE_C | |
* | |
* This module is required for X.509 certificate request writing. | |
*/ | |
#define MBEDTLS_X509_CSR_WRITE_C | |
/** | |
* \def MBEDTLS_XTEA_C | |
* | |
* Enable the XTEA block cipher. | |
* | |
* Module: library/xtea.c | |
* Caller: | |
*/ | |
#define MBEDTLS_XTEA_C | |
/* \} name SECTION: mbed TLS modules */ | |
/** | |
* \name SECTION: Module configuration options | |
* | |
* This section allows for the setting of module specific sizes and | |
* configuration options. The default values are already present in the | |
* relevant header files and should suffice for the regular use cases. | |
* | |
* Our advice is to enable options and change their values here | |
* only if you have a good reason and know the consequences. | |
* | |
* Please check the respective header file for documentation on these | |
* parameters (to prevent duplicate documentation). | |
* \{ | |
*/ | |
/* MPI / BIGNUM options */ | |
//#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ | |
//#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ | |
/* CTR_DRBG options */ | |
//#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */ | |
//#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ | |
//#define MBEDTLS_CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ | |
//#define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ | |
//#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ | |
/* HMAC_DRBG options */ | |
//#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ | |
//#define MBEDTLS_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ | |
//#define MBEDTLS_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ | |
//#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ | |
/* ECP options */ | |
//#define MBEDTLS_ECP_MAX_BITS 521 /**< Maximum bit size of groups */ | |
//#define MBEDTLS_ECP_WINDOW_SIZE 6 /**< Maximum window size used */ | |
//#define MBEDTLS_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */ | |
/* Entropy options */ | |
//#define MBEDTLS_ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ | |
//#define MBEDTLS_ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */ | |
//#define MBEDTLS_ENTROPY_MIN_HARDWARE 32 /**< Default minimum number of bytes required for the hardware entropy source mbedtls_hardware_poll() before entropy is released */ | |
/* Memory buffer allocator options */ | |
//#define MBEDTLS_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ | |
/* Platform options */ | |
//#define MBEDTLS_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if MBEDTLS_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */ | |
//#define MBEDTLS_PLATFORM_STD_CALLOC calloc /**< Default allocator to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_STD_EXIT exit /**< Default exit to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_STD_TIME time /**< Default time to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ | |
//#define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */ | |
/* Note: your snprintf must correclty zero-terminate the buffer! */ | |
//#define MBEDTLS_PLATFORM_STD_SNPRINTF snprintf /**< Default snprintf to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS 0 /**< Default exit value to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE 1 /**< Default exit value to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_STD_NV_SEED_READ mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_STD_NV_SEED_WRITE mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_STD_NV_SEED_FILE "seedfile" /**< Seed file to read/write with default implementation */ | |
/* To Use Function Macros MBEDTLS_PLATFORM_C must be enabled */ | |
/* MBEDTLS_PLATFORM_XXX_MACRO and MBEDTLS_PLATFORM_XXX_ALT cannot both be defined */ | |
//#define MBEDTLS_PLATFORM_CALLOC_MACRO calloc /**< Default allocator macro to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_FREE_MACRO free /**< Default free macro to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_EXIT_MACRO exit /**< Default exit macro to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_TIME_MACRO time /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ | |
//#define MBEDTLS_PLATFORM_TIME_TYPE_MACRO time_t /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ | |
//#define MBEDTLS_PLATFORM_FPRINTF_MACRO fprintf /**< Default fprintf macro to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_PRINTF_MACRO printf /**< Default printf macro to use, can be undefined */ | |
/* Note: your snprintf must correclty zero-terminate the buffer! */ | |
//#define MBEDTLS_PLATFORM_SNPRINTF_MACRO snprintf /**< Default snprintf macro to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */ | |
//#define MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */ | |
/* SSL Cache options */ | |
//#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */ | |
//#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */ | |
/* SSL options */ | |
/** \def MBEDTLS_SSL_MAX_CONTENT_LEN | |
* | |
* Maximum fragment length in bytes. | |
* | |
* Determines the size of both the incoming and outgoing TLS I/O buffers. | |
* | |
* Uncommenting MBEDTLS_SSL_IN_CONTENT_LEN and/or MBEDTLS_SSL_OUT_CONTENT_LEN | |
* will override this length by setting maximum incoming and/or outgoing | |
* fragment length, respectively. | |
*/ | |
//#define MBEDTLS_SSL_MAX_CONTENT_LEN 16384 | |
/** \def MBEDTLS_SSL_IN_CONTENT_LEN | |
* | |
* Maximum incoming fragment length in bytes. | |
* | |
* Uncomment to set the size of the inward TLS buffer independently of the | |
* outward buffer. | |
*/ | |
//#define MBEDTLS_SSL_IN_CONTENT_LEN 16384 | |
/** \def MBEDTLS_SSL_OUT_CONTENT_LEN | |
* | |
* Maximum outgoing fragment length in bytes. | |
* | |
* Uncomment to set the size of the outward TLS buffer independently of the | |
* inward buffer. | |
* | |
* It is possible to save RAM by setting a smaller outward buffer, while keeping | |
* the default inward 16384 byte buffer to conform to the TLS specification. | |
* | |
* The minimum required outward buffer size is determined by the handshake | |
* protocol's usage. Handshaking will fail if the outward buffer is too small. | |
* The specific size requirement depends on the configured ciphers and any | |
* certificate data which is sent during the handshake. | |
* | |
* For absolute minimum RAM usage, it's best to enable | |
* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH and reduce MBEDTLS_SSL_MAX_CONTENT_LEN. This | |
* reduces both incoming and outgoing buffer sizes. However this is only | |
* guaranteed if the other end of the connection also supports the TLS | |
* max_fragment_len extension. Otherwise the connection may fail. | |
*/ | |
//#define MBEDTLS_SSL_OUT_CONTENT_LEN 16384 | |
//#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ | |
//#define MBEDTLS_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */ | |
//#define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */ | |
/** | |
* Complete list of ciphersuites to use, in order of preference. | |
* | |
* \warning No dependency checking is done on that field! This option can only | |
* be used to restrict the set of available ciphersuites. It is your | |
* responsibility to make sure the needed modules are active. | |
* | |
* Use this to save a few hundred bytes of ROM (default ordering of all | |
* available ciphersuites) and a few to a few hundred bytes of RAM. | |
* | |
* The value below is only an example, not the default. | |
*/ | |
//#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 | |
/* X509 options */ | |
//#define MBEDTLS_X509_MAX_INTERMEDIATE_CA 8 /**< Maximum number of intermediate CAs in a verification chain. */ | |
//#define MBEDTLS_X509_MAX_FILE_PATH_LEN 512 /**< Maximum length of a path/filename string in bytes including the null terminator character ('\0'). */ | |
/** | |
* Allow SHA-1 in the default TLS configuration for certificate signing. | |
* Without this build-time option, SHA-1 support must be activated explicitly | |
* through mbedtls_ssl_conf_cert_profile. Turning on this option is not | |
* recommended because of it is possible to generate SHA-1 collisions, however | |
* this may be safe for legacy infrastructure where additional controls apply. | |
* | |
* \warning SHA-1 is considered a weak message digest and its use constitutes | |
* a security risk. If possible, we recommend avoiding dependencies | |
* on it, and considering stronger message digests instead. | |
* | |
*/ | |
// #define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES | |
/** | |
* Allow SHA-1 in the default TLS configuration for TLS 1.2 handshake | |
* signature and ciphersuite selection. Without this build-time option, SHA-1 | |
* support must be activated explicitly through mbedtls_ssl_conf_sig_hashes. | |
* The use of SHA-1 in TLS <= 1.1 and in HMAC-SHA-1 is always allowed by | |
* default. At the time of writing, there is no practical attack on the use | |
* of SHA-1 in handshake signatures, hence this option is turned on by default | |
* to preserve compatibility with existing peers, but the general | |
* warning applies nonetheless: | |
* | |
* \warning SHA-1 is considered a weak message digest and its use constitutes | |
* a security risk. If possible, we recommend avoiding dependencies | |
* on it, and considering stronger message digests instead. | |
* | |
*/ | |
#define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE | |
/** | |
* Uncomment the macro to let mbed TLS use your alternate implementation of | |
* mbedtls_platform_zeroize(). This replaces the default implementation in | |
* platform_util.c. | |
* | |
* mbedtls_platform_zeroize() is a widely used function across the library to | |
* zero a block of memory. The implementation is expected to be secure in the | |
* sense that it has been written to prevent the compiler from removing calls | |
* to mbedtls_platform_zeroize() as part of redundant code elimination | |
* optimizations. However, it is difficult to guarantee that calls to | |
* mbedtls_platform_zeroize() will not be optimized by the compiler as older | |
* versions of the C language standards do not provide a secure implementation | |
* of memset(). Therefore, MBEDTLS_PLATFORM_ZEROIZE_ALT enables users to | |
* configure their own implementation of mbedtls_platform_zeroize(), for | |
* example by using directives specific to their compiler, features from newer | |
* C standards (e.g using memset_s() in C11) or calling a secure memset() from | |
* their system (e.g explicit_bzero() in BSD). | |
*/ | |
//#define MBEDTLS_PLATFORM_ZEROIZE_ALT | |
/* \} name SECTION: Customisation configuration options */ | |
/* Target and application specific configurations */ | |
//#define YOTTA_CFG_MBEDTLS_TARGET_CONFIG_FILE "mbedtls/target_config.h" | |
#if defined(TARGET_LIKE_MBED) && defined(YOTTA_CFG_MBEDTLS_TARGET_CONFIG_FILE) | |
#include YOTTA_CFG_MBEDTLS_TARGET_CONFIG_FILE | |
#endif | |
/* | |
* Allow user to override any previous default. | |
* | |
* Use two macro names for that, as: | |
* - with yotta the prefix YOTTA_CFG_ is forced | |
* - without yotta is looks weird to have a YOTTA prefix. | |
*/ | |
#if defined(YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE) | |
#include YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE | |
#elif defined(MBEDTLS_USER_CONFIG_FILE) | |
#include MBEDTLS_USER_CONFIG_FILE | |
#endif | |
#include "mbedtls/check_config.h" | |
#endif /* MBEDTLS_CONFIG_H */ |