| .. |
| Copyright 2019,2020 NXP |
| |
| |
| |
| .. highlight:: bat |
| |
| .. _ex-se05x-mandate-scp: |
| |
| ======================================================================= |
| SE05X Mandate SCP example |
| ======================================================================= |
| |
| This project demonstrates how to configure SE05X to mandate platform SCP. This |
| can be used if you always want the communication with SE05X to be encrypted. |
| |
| .. note:: After this example runs successfully, further communication would require |
| Platform SCP03 encryption. |
| |
| |
| |
| Building the Demo |
| ======================================================================= |
| |
| - Build Plug & Trust middleware stack. (Refer :ref:`building`) |
| - Project: ``se05x_MandatePlatformSCP`` |
| |
| - CMake configuration |
| |
| ``SE05X_Auth``:``None`` |
| |
| |
| Running the Example |
| ======================================================================= |
| |
| If you have built a binary, flash the binary on to the board and reset |
| the board. |
| |
| If you have built an *exe* to be run from Windows using VCOM, run as:: |
| |
| se05x_MandatePlatformSCP.exe <PORT NAME> |
| |
| Where **<PORT NAME>** is the VCOM COM port. |
| |
| On Raspberry-Pi or iMX board, run as:: |
| |
| ./se05x_MandatePlatformSCP |
