weston: Add set up SIGUSR1 blocking early using pthread_sigmask()

Xwayland block SIGUSR1 signal for handling this signal. However, if some
weston plugins creates additional threads before xwayland is loaded,
this signal get delivered these threads and causes weston quit.
Therefore, we should set up SIGUSR1 blocking early so that these threads
can inherit the setting when created.

BUG: 144038327

Cherry picked from upstream commit
https://github.com/wayland-project/weston/commit/f59dc1112be50467b7c0f8aeba68f3aa10d36725

Change-Id: I2e2c3a3b3be0d3a84cb092e6991be1f978b6fc02
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
diff --git a/Makefile.am b/Makefile.am
index f01282a..095a2c2 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -183,11 +183,13 @@
 weston_CPPFLAGS = $(AM_CPPFLAGS) -DIN_WESTON 		\
 				 -DMODULEDIR='"$(moduledir)"' \
 				 -DXSERVER_PATH='"@XSERVER_PATH@"'
-weston_CFLAGS = $(AM_CFLAGS) $(COMPOSITOR_CFLAGS) $(LIBINPUT_BACKEND_CFLAGS)
+weston_CFLAGS = $(AM_CFLAGS) $(COMPOSITOR_CFLAGS) $(LIBINPUT_BACKEND_CFLAGS) \
+	$(PTHREAD_CFLAGS)
 weston_LDADD = libshared.la libweston-@LIBWESTON_MAJOR@.la \
 	$(COMPOSITOR_LIBS) \
 	$(DL_LIBS) $(LIBINPUT_BACKEND_LIBS) \
 	$(CLOCK_GETRES_LIBS) \
+	$(PTHREAD_LIBS) \
 	-lm
 
 weston_SOURCES = 					\
diff --git a/compositor/main.c b/compositor/main.c
index 92f6124..c4d9fb9 100644
--- a/compositor/main.c
+++ b/compositor/main.c
@@ -2451,6 +2451,8 @@
 	struct weston_seat *seat;
 	struct wet_compositor wet = { 0 };
 	int require_input;
+	sigset_t mask;
+
 	int32_t wait_for_debugger = 0;
 
 	const struct weston_option core_options[] = {
@@ -2522,6 +2524,14 @@
 	if (!signals[0] || !signals[1] || !signals[2] || !signals[3])
 		goto out_signals;
 
+	/* Xwayland uses SIGUSR1 for communicating with weston. Since some
+	   weston plugins may create additional threads, set up any necessary
+	   signal blocking early so that these threads can inherit the settings
+	   when created. */
+	sigemptyset(&mask);
+	sigaddset(&mask, SIGUSR1);
+	pthread_sigmask(SIG_BLOCK, &mask, NULL);
+
 	if (load_configuration(&config, noconfig, config_file) < 0)
 		goto out_signals;
 	wet.config = config;
diff --git a/configure.ac b/configure.ac
index 9d98e84..44dd6f1 100644
--- a/configure.ac
+++ b/configure.ac
@@ -91,6 +91,9 @@
 
 PKG_PROG_PKG_CONFIG()
 
+# Check pthread
+AX_PTHREAD
+
 # Check for dlsym instead of dlopen because ASAN hijacks the latter
 WESTON_SEARCH_LIBS([DL], [dl], [dlsym])
 
diff --git a/m4/ax_pthread.m4 b/m4/ax_pthread.m4
new file mode 100644
index 0000000..5fbf9fe
--- /dev/null
+++ b/m4/ax_pthread.m4
@@ -0,0 +1,485 @@
+# ===========================================================================
+#        https://www.gnu.org/software/autoconf-archive/ax_pthread.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
+#
+# DESCRIPTION
+#
+#   This macro figures out how to build C programs using POSIX threads. It
+#   sets the PTHREAD_LIBS output variable to the threads library and linker
+#   flags, and the PTHREAD_CFLAGS output variable to any special C compiler
+#   flags that are needed. (The user can also force certain compiler
+#   flags/libs to be tested by setting these environment variables.)
+#
+#   Also sets PTHREAD_CC to any special C compiler that is needed for
+#   multi-threaded programs (defaults to the value of CC otherwise). (This
+#   is necessary on AIX to use the special cc_r compiler alias.)
+#
+#   NOTE: You are assumed to not only compile your program with these flags,
+#   but also to link with them as well. For example, you might link with
+#   $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS
+#
+#   If you are only building threaded programs, you may wish to use these
+#   variables in your default LIBS, CFLAGS, and CC:
+#
+#     LIBS="$PTHREAD_LIBS $LIBS"
+#     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+#     CC="$PTHREAD_CC"
+#
+#   In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant
+#   has a nonstandard name, this macro defines PTHREAD_CREATE_JOINABLE to
+#   that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+#
+#   Also HAVE_PTHREAD_PRIO_INHERIT is defined if pthread is found and the
+#   PTHREAD_PRIO_INHERIT symbol is defined when compiling with
+#   PTHREAD_CFLAGS.
+#
+#   ACTION-IF-FOUND is a list of shell commands to run if a threads library
+#   is found, and ACTION-IF-NOT-FOUND is a list of commands to run it if it
+#   is not found. If ACTION-IF-FOUND is not specified, the default action
+#   will define HAVE_PTHREAD.
+#
+#   Please let the authors know if this macro fails on any platform, or if
+#   you have any other suggestions or comments. This macro was based on work
+#   by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) (with help
+#   from M. Frigo), as well as ac_pthread and hb_pthread macros posted by
+#   Alejandro Forero Cuervo to the autoconf macro repository. We are also
+#   grateful for the helpful feedback of numerous users.
+#
+#   Updated for Autoconf 2.68 by Daniel Richard G.
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+#   Copyright (c) 2011 Daniel Richard G. <skunk@iSKUNK.ORG>
+#
+#   This program is free software: you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation, either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <https://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 24
+
+AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD])
+AC_DEFUN([AX_PTHREAD], [
+AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_PROG_SED])
+AC_LANG_PUSH([C])
+ax_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on Tru64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then
+        ax_pthread_save_CC="$CC"
+        ax_pthread_save_CFLAGS="$CFLAGS"
+        ax_pthread_save_LIBS="$LIBS"
+        AS_IF([test "x$PTHREAD_CC" != "x"], [CC="$PTHREAD_CC"])
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        AC_MSG_CHECKING([for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS])
+        AC_LINK_IFELSE([AC_LANG_CALL([], [pthread_join])], [ax_pthread_ok=yes])
+        AC_MSG_RESULT([$ax_pthread_ok])
+        if test "x$ax_pthread_ok" = "xno"; then
+                PTHREAD_LIBS=""
+                PTHREAD_CFLAGS=""
+        fi
+        CC="$ax_pthread_save_CC"
+        CFLAGS="$ax_pthread_save_CFLAGS"
+        LIBS="$ax_pthread_save_LIBS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try.  Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important.  Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+#       other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64
+#           (Note: HP C rejects this with "bad form for `-t' option")
+# -pthreads: Solaris/gcc (Note: HP C also rejects)
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+#      doesn't hurt to check since this sometimes defines pthreads and
+#      -D_REENTRANT too), HP C (must be checked before -lpthread, which
+#      is present but should not be used directly; and before -mthreads,
+#      because the compiler interprets this as "-mt" + "-hreads")
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case $host_os in
+
+        freebsd*)
+
+        # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+        # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+
+        ax_pthread_flags="-kthread lthread $ax_pthread_flags"
+        ;;
+
+        hpux*)
+
+        # From the cc(1) man page: "[-mt] Sets various -D flags to enable
+        # multi-threading and also sets -lpthread."
+
+        ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags"
+        ;;
+
+        openedition*)
+
+        # IBM z/OS requires a feature-test macro to be defined in order to
+        # enable POSIX threads at all, so give the user a hint if this is
+        # not set. (We don't define these ourselves, as they can affect
+        # other portions of the system API in unpredictable ways.)
+
+        AC_EGREP_CPP([AX_PTHREAD_ZOS_MISSING],
+            [
+#            if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS)
+             AX_PTHREAD_ZOS_MISSING
+#            endif
+            ],
+            [AC_MSG_WARN([IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support.])])
+        ;;
+
+        solaris*)
+
+        # On Solaris (at least, for some versions), libc contains stubbed
+        # (non-functional) versions of the pthreads routines, so link-based
+        # tests will erroneously succeed. (N.B.: The stubs are missing
+        # pthread_cleanup_push, or rather a function called by this macro,
+        # so we could check for that, but who knows whether they'll stub
+        # that too in a future libc.)  So we'll check first for the
+        # standard Solaris way of linking pthreads (-mt -lpthread).
+
+        ax_pthread_flags="-mt,pthread pthread $ax_pthread_flags"
+        ;;
+esac
+
+# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC)
+
+AS_IF([test "x$GCC" = "xyes"],
+      [ax_pthread_flags="-pthread -pthreads $ax_pthread_flags"])
+
+# The presence of a feature test macro requesting re-entrant function
+# definitions is, on some systems, a strong hint that pthreads support is
+# correctly enabled
+
+case $host_os in
+        darwin* | hpux* | linux* | osf* | solaris*)
+        ax_pthread_check_macro="_REENTRANT"
+        ;;
+
+        aix*)
+        ax_pthread_check_macro="_THREAD_SAFE"
+        ;;
+
+        *)
+        ax_pthread_check_macro="--"
+        ;;
+esac
+AS_IF([test "x$ax_pthread_check_macro" = "x--"],
+      [ax_pthread_check_cond=0],
+      [ax_pthread_check_cond="!defined($ax_pthread_check_macro)"])
+
+# Are we compiling with Clang?
+
+AC_CACHE_CHECK([whether $CC is Clang],
+    [ax_cv_PTHREAD_CLANG],
+    [ax_cv_PTHREAD_CLANG=no
+     # Note that Autoconf sets GCC=yes for Clang as well as GCC
+     if test "x$GCC" = "xyes"; then
+        AC_EGREP_CPP([AX_PTHREAD_CC_IS_CLANG],
+            [/* Note: Clang 2.7 lacks __clang_[a-z]+__ */
+#            if defined(__clang__) && defined(__llvm__)
+             AX_PTHREAD_CC_IS_CLANG
+#            endif
+            ],
+            [ax_cv_PTHREAD_CLANG=yes])
+     fi
+    ])
+ax_pthread_clang="$ax_cv_PTHREAD_CLANG"
+
+ax_pthread_clang_warning=no
+
+# Clang needs special handling, because older versions handle the -pthread
+# option in a rather... idiosyncratic way
+
+if test "x$ax_pthread_clang" = "xyes"; then
+
+        # Clang takes -pthread; it has never supported any other flag
+
+        # (Note 1: This will need to be revisited if a system that Clang
+        # supports has POSIX threads in a separate library.  This tends not
+        # to be the way of modern systems, but it's conceivable.)
+
+        # (Note 2: On some systems, notably Darwin, -pthread is not needed
+        # to get POSIX threads support; the API is always present and
+        # active.  We could reasonably leave PTHREAD_CFLAGS empty.  But
+        # -pthread does define _REENTRANT, and while the Darwin headers
+        # ignore this macro, third-party headers might not.)
+
+        PTHREAD_CFLAGS="-pthread"
+        PTHREAD_LIBS=
+
+        ax_pthread_ok=yes
+
+        # However, older versions of Clang make a point of warning the user
+        # that, in an invocation where only linking and no compilation is
+        # taking place, the -pthread option has no effect ("argument unused
+        # during compilation").  They expect -pthread to be passed in only
+        # when source code is being compiled.
+        #
+        # Problem is, this is at odds with the way Automake and most other
+        # C build frameworks function, which is that the same flags used in
+        # compilation (CFLAGS) are also used in linking.  Many systems
+        # supported by AX_PTHREAD require exactly this for POSIX threads
+        # support, and in fact it is often not straightforward to specify a
+        # flag that is used only in the compilation phase and not in
+        # linking.  Such a scenario is extremely rare in practice.
+        #
+        # Even though use of the -pthread flag in linking would only print
+        # a warning, this can be a nuisance for well-run software projects
+        # that build with -Werror.  So if the active version of Clang has
+        # this misfeature, we search for an option to squash it.
+
+        AC_CACHE_CHECK([whether Clang needs flag to prevent "argument unused" warning when linking with -pthread],
+            [ax_cv_PTHREAD_CLANG_NO_WARN_FLAG],
+            [ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown
+             # Create an alternate version of $ac_link that compiles and
+             # links in two steps (.c -> .o, .o -> exe) instead of one
+             # (.c -> exe), because the warning occurs only in the second
+             # step
+             ax_pthread_save_ac_link="$ac_link"
+             ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g'
+             ax_pthread_link_step=`$as_echo "$ac_link" | sed "$ax_pthread_sed"`
+             ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)"
+             ax_pthread_save_CFLAGS="$CFLAGS"
+             for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do
+                AS_IF([test "x$ax_pthread_try" = "xunknown"], [break])
+                CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS"
+                ac_link="$ax_pthread_save_ac_link"
+                AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return 0;}]])],
+                    [ac_link="$ax_pthread_2step_ac_link"
+                     AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return 0;}]])],
+                         [break])
+                    ])
+             done
+             ac_link="$ax_pthread_save_ac_link"
+             CFLAGS="$ax_pthread_save_CFLAGS"
+             AS_IF([test "x$ax_pthread_try" = "x"], [ax_pthread_try=no])
+             ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try"
+            ])
+
+        case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in
+                no | unknown) ;;
+                *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;;
+        esac
+
+fi # $ax_pthread_clang = yes
+
+if test "x$ax_pthread_ok" = "xno"; then
+for ax_pthread_try_flag in $ax_pthread_flags; do
+
+        case $ax_pthread_try_flag in
+                none)
+                AC_MSG_CHECKING([whether pthreads work without any flags])
+                ;;
+
+                -mt,pthread)
+                AC_MSG_CHECKING([whether pthreads work with -mt -lpthread])
+                PTHREAD_CFLAGS="-mt"
+                PTHREAD_LIBS="-lpthread"
+                ;;
+
+                -*)
+                AC_MSG_CHECKING([whether pthreads work with $ax_pthread_try_flag])
+                PTHREAD_CFLAGS="$ax_pthread_try_flag"
+                ;;
+
+                pthread-config)
+                AC_CHECK_PROG([ax_pthread_config], [pthread-config], [yes], [no])
+                AS_IF([test "x$ax_pthread_config" = "xno"], [continue])
+                PTHREAD_CFLAGS="`pthread-config --cflags`"
+                PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+                ;;
+
+                *)
+                AC_MSG_CHECKING([for the pthreads library -l$ax_pthread_try_flag])
+                PTHREAD_LIBS="-l$ax_pthread_try_flag"
+                ;;
+        esac
+
+        ax_pthread_save_CFLAGS="$CFLAGS"
+        ax_pthread_save_LIBS="$LIBS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+
+        # Check for various functions.  We must include pthread.h,
+        # since some functions may be macros.  (On the Sequent, we
+        # need a special flag -Kthread to make this header compile.)
+        # We check for pthread_join because it is in -lpthread on IRIX
+        # while pthread_create is in libc.  We check for pthread_attr_init
+        # due to DEC craziness with -lpthreads.  We check for
+        # pthread_cleanup_push because it is one of the few pthread
+        # functions on Solaris that doesn't have a non-functional libc stub.
+        # We try pthread_create on general principles.
+
+        AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>
+#                       if $ax_pthread_check_cond
+#                        error "$ax_pthread_check_macro must be defined"
+#                       endif
+                        static void routine(void *a) { a = 0; }
+                        static void *start_routine(void *a) { return a; }],
+                       [pthread_t th; pthread_attr_t attr;
+                        pthread_create(&th, 0, start_routine, 0);
+                        pthread_join(th, 0);
+                        pthread_attr_init(&attr);
+                        pthread_cleanup_push(routine, 0);
+                        pthread_cleanup_pop(0) /* ; */])],
+            [ax_pthread_ok=yes],
+            [])
+
+        CFLAGS="$ax_pthread_save_CFLAGS"
+        LIBS="$ax_pthread_save_LIBS"
+
+        AC_MSG_RESULT([$ax_pthread_ok])
+        AS_IF([test "x$ax_pthread_ok" = "xyes"], [break])
+
+        PTHREAD_LIBS=""
+        PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$ax_pthread_ok" = "xyes"; then
+        ax_pthread_save_CFLAGS="$CFLAGS"
+        ax_pthread_save_LIBS="$LIBS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+
+        # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+        AC_CACHE_CHECK([for joinable pthread attribute],
+            [ax_cv_PTHREAD_JOINABLE_ATTR],
+            [ax_cv_PTHREAD_JOINABLE_ATTR=unknown
+             for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+                 AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>],
+                                                 [int attr = $ax_pthread_attr; return attr /* ; */])],
+                                [ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break],
+                                [])
+             done
+            ])
+        AS_IF([test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \
+               test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \
+               test "x$ax_pthread_joinable_attr_defined" != "xyes"],
+              [AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE],
+                                  [$ax_cv_PTHREAD_JOINABLE_ATTR],
+                                  [Define to necessary symbol if this constant
+                                   uses a non-standard name on your system.])
+               ax_pthread_joinable_attr_defined=yes
+              ])
+
+        AC_CACHE_CHECK([whether more special flags are required for pthreads],
+            [ax_cv_PTHREAD_SPECIAL_FLAGS],
+            [ax_cv_PTHREAD_SPECIAL_FLAGS=no
+             case $host_os in
+             solaris*)
+             ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS"
+             ;;
+             esac
+            ])
+        AS_IF([test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \
+               test "x$ax_pthread_special_flags_added" != "xyes"],
+              [PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS"
+               ax_pthread_special_flags_added=yes])
+
+        AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT],
+            [ax_cv_PTHREAD_PRIO_INHERIT],
+            [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <pthread.h>]],
+                                             [[int i = PTHREAD_PRIO_INHERIT;]])],
+                            [ax_cv_PTHREAD_PRIO_INHERIT=yes],
+                            [ax_cv_PTHREAD_PRIO_INHERIT=no])
+            ])
+        AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \
+               test "x$ax_pthread_prio_inherit_defined" != "xyes"],
+              [AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have PTHREAD_PRIO_INHERIT.])
+               ax_pthread_prio_inherit_defined=yes
+              ])
+
+        CFLAGS="$ax_pthread_save_CFLAGS"
+        LIBS="$ax_pthread_save_LIBS"
+
+        # More AIX lossage: compile with *_r variant
+        if test "x$GCC" != "xyes"; then
+            case $host_os in
+                aix*)
+                AS_CASE(["x/$CC"],
+                    [x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6],
+                    [#handle absolute path differently from PATH based program lookup
+                     AS_CASE(["x$CC"],
+                         [x/*],
+                         [AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])],
+                         [AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])])])
+                ;;
+            esac
+        fi
+fi
+
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+
+AC_SUBST([PTHREAD_LIBS])
+AC_SUBST([PTHREAD_CFLAGS])
+AC_SUBST([PTHREAD_CC])
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test "x$ax_pthread_ok" = "xyes"; then
+        ifelse([$1],,[AC_DEFINE([HAVE_PTHREAD],[1],[Define if you have POSIX threads libraries and header files.])],[$1])
+        :
+else
+        ax_pthread_ok=no
+        $2
+fi
+AC_LANG_POP
+])dnl AX_PTHREAD