blob: 43c68a55d16aee75a0614770b1330951a926cfbe [file] [log] [blame]
#
# Video configuration
#
menu "Graphics support"
config DM_VIDEO
bool "Enable driver model support for LCD/video"
depends on DM
help
This enables driver model for LCD and video devices. These support
a bitmap display of various sizes and depths which can be drawn on
to display a command-line console or splash screen. Enabling this
option compiles in the video uclass and routes all LCD/video access
through this.
config VIDEO_BPP8
bool "Support 8-bit-per-pixel displays"
depends on DM_VIDEO
default y if DM_VIDEO
help
Support drawing text and bitmaps onto a 8-bit-per-pixel display.
Enabling this will include code to support this display. Without
this option, such displays will not be supported and console output
will be empty.
config VIDEO_BPP16
bool "Support 16-bit-per-pixel displays"
depends on DM_VIDEO
default y if DM_VIDEO
help
Support drawing text and bitmaps onto a 16-bit-per-pixel display.
Enabling this will include code to support this display. Without
this option, such displays will not be supported and console output
will be empty.
config VIDEO_BPP32
bool "Support 32-bit-per-pixel displays"
depends on DM_VIDEO
default y if DM_VIDEO
help
Support drawing text and bitmaps onto a 32-bit-per-pixel display.
Enabling this will include code to support this display. Without
this option, such displays will not be supported and console output
will be empty.
config CONSOLE_NORMAL
bool "Support a simple text console"
depends on DM_VIDEO
default y if DM_VIDEO
help
Support drawing text on the frame buffer console so that it can be
used as a console. Rotation is not supported by this driver (see
CONFIG_CONSOLE_ROTATION for that). A built-in 8x16 font is used
for the display.
config CONSOLE_ROTATION
bool "Support rotated displays"
depends on DM_VIDEO
help
Sometimes, for example if the display is mounted in portrait
mode or even if it's mounted landscape but rotated by 180degree,
we need to rotate our content of the display relative to the
framebuffer, so that user can read the messages which are
printed out. Enable this option to include a text driver which can
support this. The rotation is set by the 'rot' parameter in
struct video_priv: 0=unrotated, 1=90 degrees clockwise, 2=180
degrees, 3=270 degrees.
config CONSOLE_TRUETYPE
bool "Support a console that uses TrueType fonts"
depends on DM_VIDEO
help
TrueTrype fonts can provide outline-drawing capability rather than
needing to provide a bitmap for each font and size that is needed.
With this option you can adjust the text size and use a variety of
fonts. Note that this is noticeably slower than with normal console.
config CONSOLE_TRUETYPE_SIZE
int "TrueType font size"
depends on CONSOLE_TRUETYPE
default 18
help
This sets the font size for the console. The size is measured in
pixels and is the nominal height of a character. Note that fonts
are commonly measured in 'points', being 1/72 inch (about 3.52mm).
However that measurement depends on the size of your display and
there is no standard display density. At present there is not a
method to select the display's physical size, which would allow
U-Boot to calculate the correct font size.
source "drivers/video/fonts/Kconfig"
config VIDCONSOLE_AS_LCD
bool "Use 'vidconsole' when 'lcd' is seen in stdout"
depends on DM_VIDEO
help
This is a work-around for boards which have 'lcd' in their stdout
environment variable, but have moved to use driver model for video.
In this case the console will no-longer work. While it is possible
to update the environment, the breakage may be confusing for users.
This option will be removed around the end of 2016.
config VIDEO_COREBOOT
bool "Enable coreboot framebuffer driver support"
depends on X86 && SYS_COREBOOT
help
Turn on this option to enable a framebuffer driver when U-Boot is
loaded by coreboot where the graphics device is configured by
coreboot already. This can in principle be used with any platform
that coreboot supports.
config VIDEO_VESA
bool "Enable VESA video driver support"
default n
help
Turn on this option to enable a very simple driver which uses vesa
to discover the video mode and then provides a frame buffer for use
by U-Boot. This can in principle be used with any platform that
supports PCI and video cards that support VESA BIOS Extension (VBE).
config FRAMEBUFFER_SET_VESA_MODE
bool "Set framebuffer graphics resolution"
depends on VIDEO_VESA || VIDEO_BROADWELL_IGD
help
Set VESA/native framebuffer mode (needed for bootsplash and graphical
framebuffer console)
choice
prompt "framebuffer graphics resolution"
default FRAMEBUFFER_VESA_MODE_117
depends on FRAMEBUFFER_SET_VESA_MODE
help
This option sets the resolution used for the U-Boot framebuffer (and
bootsplash screen).
config FRAMEBUFFER_VESA_MODE_100
bool "640x400 256-color"
config FRAMEBUFFER_VESA_MODE_101
bool "640x480 256-color"
config FRAMEBUFFER_VESA_MODE_102
bool "800x600 16-color"
config FRAMEBUFFER_VESA_MODE_103
bool "800x600 256-color"
config FRAMEBUFFER_VESA_MODE_104
bool "1024x768 16-color"
config FRAMEBUFFER_VESA_MODE_105
bool "1024x768 256-color"
config FRAMEBUFFER_VESA_MODE_106
bool "1280x1024 16-color"
config FRAMEBUFFER_VESA_MODE_107
bool "1280x1024 256-color"
config FRAMEBUFFER_VESA_MODE_108
bool "80x60 text"
config FRAMEBUFFER_VESA_MODE_109
bool "132x25 text"
config FRAMEBUFFER_VESA_MODE_10A
bool "132x43 text"
config FRAMEBUFFER_VESA_MODE_10B
bool "132x50 text"
config FRAMEBUFFER_VESA_MODE_10C
bool "132x60 text"
config FRAMEBUFFER_VESA_MODE_10D
bool "320x200 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_10E
bool "320x200 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_10F
bool "320x200 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_110
bool "640x480 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_111
bool "640x480 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_112
bool "640x480 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_113
bool "800x600 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_114
bool "800x600 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_115
bool "800x600 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_116
bool "1024x768 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_117
bool "1024x768 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_118
bool "1024x768 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_119
bool "1280x1024 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_11A
bool "1280x1024 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_11B
bool "1280x1024 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_USER
bool "Manually select VESA mode"
endchoice
# Map the config names to an integer (KB).
config FRAMEBUFFER_VESA_MODE
prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER
hex
default 0x100 if FRAMEBUFFER_VESA_MODE_100
default 0x101 if FRAMEBUFFER_VESA_MODE_101
default 0x102 if FRAMEBUFFER_VESA_MODE_102
default 0x103 if FRAMEBUFFER_VESA_MODE_103
default 0x104 if FRAMEBUFFER_VESA_MODE_104
default 0x105 if FRAMEBUFFER_VESA_MODE_105
default 0x106 if FRAMEBUFFER_VESA_MODE_106
default 0x107 if FRAMEBUFFER_VESA_MODE_107
default 0x108 if FRAMEBUFFER_VESA_MODE_108
default 0x109 if FRAMEBUFFER_VESA_MODE_109
default 0x10A if FRAMEBUFFER_VESA_MODE_10A
default 0x10B if FRAMEBUFFER_VESA_MODE_10B
default 0x10C if FRAMEBUFFER_VESA_MODE_10C
default 0x10D if FRAMEBUFFER_VESA_MODE_10D
default 0x10E if FRAMEBUFFER_VESA_MODE_10E
default 0x10F if FRAMEBUFFER_VESA_MODE_10F
default 0x110 if FRAMEBUFFER_VESA_MODE_110
default 0x111 if FRAMEBUFFER_VESA_MODE_111
default 0x112 if FRAMEBUFFER_VESA_MODE_112
default 0x113 if FRAMEBUFFER_VESA_MODE_113
default 0x114 if FRAMEBUFFER_VESA_MODE_114
default 0x115 if FRAMEBUFFER_VESA_MODE_115
default 0x116 if FRAMEBUFFER_VESA_MODE_116
default 0x117 if FRAMEBUFFER_VESA_MODE_117
default 0x118 if FRAMEBUFFER_VESA_MODE_118
default 0x119 if FRAMEBUFFER_VESA_MODE_119
default 0x11A if FRAMEBUFFER_VESA_MODE_11A
default 0x11B if FRAMEBUFFER_VESA_MODE_11B
default 0x117 if FRAMEBUFFER_VESA_MODE_USER
config VIDEO_LCD_ANX9804
bool "ANX9804 bridge chip"
default n
---help---
Support for the ANX9804 bridge chip, which can take pixel data coming
from a parallel LCD interface and translate it on the fy into a DP
interface for driving eDP TFT displays. It uses I2C for configuration.
config VIDEO_LCD_SSD2828
bool "SSD2828 bridge chip"
default n
---help---
Support for the SSD2828 bridge chip, which can take pixel data coming
from a parallel LCD interface and translate it on the fly into MIPI DSI
interface for driving a MIPI compatible LCD panel. It uses SPI for
configuration.
config VIDEO_LCD_SSD2828_TX_CLK
int "SSD2828 TX_CLK frequency (in MHz)"
depends on VIDEO_LCD_SSD2828
default 0
---help---
The frequency of the crystal, which is clocking SSD2828. It may be
anything in the 8MHz-30MHz range and the exact value should be
retrieved from the board schematics. Or in the case of Allwinner
hardware, it can be usually found as 'lcd_xtal_freq' variable in
FEX files. It can be also set to 0 for selecting PCLK from the
parallel LCD interface instead of TX_CLK as the PLL clock source.
config VIDEO_LCD_SSD2828_RESET
string "RESET pin of SSD2828"
depends on VIDEO_LCD_SSD2828
default ""
---help---
The reset pin of SSD2828 chip. This takes a string in the format
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
config VIDEO_LCD_HITACHI_TX18D42VM
bool "Hitachi tx18d42vm LVDS LCD panel support"
depends on VIDEO
default n
---help---
Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a
lcd controller which needs to be initialized over SPI, once that is
done they work like a regular LVDS panel.
config VIDEO_LCD_SPI_CS
string "SPI CS pin for LCD related config job"
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
default ""
---help---
This is one of the SPI communication pins, involved in setting up a
working LCD configuration. The exact role of SPI may differ for
different hardware setups. The option takes a string in the format
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
config VIDEO_LCD_SPI_SCLK
string "SPI SCLK pin for LCD related config job"
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
default ""
---help---
This is one of the SPI communication pins, involved in setting up a
working LCD configuration. The exact role of SPI may differ for
different hardware setups. The option takes a string in the format
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
config VIDEO_LCD_SPI_MOSI
string "SPI MOSI pin for LCD related config job"
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
default ""
---help---
This is one of the SPI communication pins, involved in setting up a
working LCD configuration. The exact role of SPI may differ for
different hardware setups. The option takes a string in the format
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
config VIDEO_LCD_SPI_MISO
string "SPI MISO pin for LCD related config job (optional)"
depends on VIDEO_LCD_SSD2828
default ""
---help---
This is one of the SPI communication pins, involved in setting up a
working LCD configuration. The exact role of SPI may differ for
different hardware setups. If wired up, this pin may provide additional
useful functionality. Such as bi-directional communication with the
hardware and LCD panel id retrieval (if the panel can report it). The
option takes a string in the format understood by 'name_to_gpio'
function, e.g. PH1 for pin 1 of port H.
config VIDEO_MVEBU
bool "Armada XP LCD controller"
default n
---help---
Support for the LCD controller integrated in the Marvell
Armada XP SoC.
config I2C_EDID
bool "Enable EDID library"
depends on DM_I2C
default n
help
This enables library for accessing EDID data from an LCD panel.
config DISPLAY
bool "Enable Display support"
depends on DM
default n
select I2C_EDID
help
This supports drivers that provide a display, such as eDP (Embedded
DisplayPort) and HDMI (High Definition Multimedia Interface).
The devices provide a simple interface to start up the display,
read display information and enable it.
config VIDEO_BROADWELL_IGD
bool "Enable Intel Broadwell integrated graphics device"
depends on X86
help
This enables support for integrated graphics on Intel broadwell
devices. Initialisation is mostly performed by a VGA boot ROM, with
some setup handled by U-Boot itself. The graphics adaptor works as
a VESA device and supports LCD panels, eDP and LVDS outputs.
Configuration of most aspects of device operation is performed using
a special tool which configures the VGA ROM, but the graphics
resolution can be selected in U-Boot.
config VIDEO_IVYBRIDGE_IGD
bool "Enable Intel Ivybridge integration graphics support"
depends on X86
help
This enables support for integrated graphics on Intel ivybridge
devices. Initialisation is mostly performed by a VGA boot ROM, with
some setup handled by U-Boot itself. The graphics adaptor works as
a VESA device and supports LCD panels, eDP and LVDS outputs.
Configuration of most aspects of device operation is performed using
a special tool which configures the VGA ROM, but the graphics
resolution can be selected in U-Boot.
config VIDEO_ROCKCHIP
bool "Enable Rockchip video support"
depends on DM_VIDEO
help
Rockchip SoCs provide video output capabilities for High-Definition
Multimedia Interface (HDMI), Low-voltage Differential Signalling
(LVDS), embedded DisplayPort (eDP) and Display Serial Interface
(DSI). This driver supports the on-chip video output device, and
targets the Rockchip RK3288.
config VIDEO_SANDBOX_SDL
bool "Enable sandbox video console using SDL"
depends on SANDBOX
help
When using sandbox you can enable an emulated LCD display which
appears as an SDL (Simple DirectMedia Layer) window. This is a
console device and can display stdout output. Within U-Boot is is
a normal bitmap display and can display images as well as text.
config VIDEO_TEGRA20
bool "Enable LCD support on Tegra20"
depends on OF_CONTROL
help
Tegra20 supports video output to an attached LCD panel as well as
other options such as HDMI. Only the LCD is supported in U-Boot.
This option enables this support which can be used on devices which
have an LCD display connected.
config VIDEO_TEGRA124
bool "Enable video support on Tegra124"
depends on DM_VIDEO
help
Tegra124 supports many video output options including eDP and
HDMI. At present only eDP is supported by U-Boot. This option
enables this support which can be used on devices which
have an eDP display connected.
source "drivers/video/bridge/Kconfig"
config VIDEO
bool "Enable legacy video support"
depends on !DM_VIDEO
help
Define this for video support, without using driver model. Some
drivers use this because they are not yet converted to driver
model. Video drivers typically provide a colour text console and
cursor.
config VIDEO_IPUV3
bool "i.MX IPUv3 Core video support"
depends on VIDEO && MX6
help
This enables framebuffer driver for i.MX processors working
on the IPUv3(Image Processing Unit) internal graphic processor.
config VIDEO_IMXDPUV1
bool "i.MX DPU V1 display support"
default n
depends on VIDEO && IMX8
help
Support for IMXDPU V1 display controller for i.MX8 processors.
config VIDEO_IMXDCSS
bool "i.MX8 DCSS display support"
default n
depends on VIDEO && IMX8M
help
Support for DCSS display controller for i.MX8 processors.
config VIDEO_IMX_HDP_LOAD
bool "i.MX8 HDMI/DP firmware loading"
default n
depends on VIDEO && IMX8QM
help
Support for HDMI/DP firmware loading for i.MX8QM processors. The
firmware is copied from system memory to the HDMI/DP IRAM and
DRAM memory.
config VIDEO_IMX8_HDMI
bool "i.MX8 HDMI Splash screen"
default n
depends on VIDEO && IMX8M
help
Support for HDMI i.MX8 processors.
config MXC_EPDC
bool "i.MX EPDC support"
depends on LCD && (MX7 || MX6)
help
This enable the E-ink EPD panel controller support for i.MX processors
config WAVEFORM_BUF_SIZE
bool "The buffer size allocated for i.MX EPDC waveform file"
depends on MXC_EPDC
help
Set the buffer size for loading waveform file.
config CFB_CONSOLE
bool "Enable colour frame buffer console"
depends on VIDEO
default y if VIDEO
help
Enables the colour frame buffer driver. This supports colour
output on a bitmap display from an in-memory frame buffer.
Several colour devices are supported along with various options to
adjust the supported features. The driver is implemented in
cfb_console.c
The following defines are needed (cf. smiLynxEM, i8042)
VIDEO_FB_LITTLE_ENDIAN graphic memory organisation
(default big endian)
VIDEO_HW_RECTFILL graphic chip supports
rectangle fill (cf. smiLynxEM)
VIDEO_HW_BITBLT graphic chip supports
bit-blit (cf. smiLynxEM)
VIDEO_VISIBLE_COLS visible pixel columns (cols=pitch)
VIDEO_VISIBLE_ROWS visible pixel rows
VIDEO_PIXEL_SIZE bytes per pixel
VIDEO_DATA_FORMAT graphic data format
(0-5, cf. cfb_console.c)
VIDEO_FB_ADRS framebuffer address
VIDEO_KBD_INIT_FCT keyboard int fct (i.e. rx51_kp_init())
VIDEO_TSTC_FCT test char fct (i.e. rx51_kp_tstc)
VIDEO_GETC_FCT get char fct (i.e. rx51_kp_getc)
CONFIG_VIDEO_LOGO display Linux logo in upper left corner
CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of linux_logo.h
for logo. Requires CONFIG_VIDEO_LOGO
CONFIG_CONSOLE_EXTRA_INFO
additional board info beside
the logo
CONFIG_HIDE_LOGO_VERSION
do not display bootloader
version string
When CONFIG_CFB_CONSOLE is defined, the video console is the
default console. The serial console can be forced by setting the
environment 'console=serial'.
config CFB_CONSOLE_ANSI
bool "Support ANSI escape sequences"
depends on CFB_CONSOLE
help
This allows the colour buffer frame buffer driver to support
a limited number of ANSI escape sequences (cursor control,
erase functions and limited graphics rendition control). Normal
output from U-Boot will pass through this filter.
config VGA_AS_SINGLE_DEVICE
bool "Set the video as an output-only device"
depends on CFB_CONSOLE
default y
help
If enable the framebuffer device will be initialized as an
output-only device. The Keyboard driver will not be set up. This
may be used if you have no keyboard device, or more than one
(USB Keyboard, AT Keyboard).
config VIDEO_SW_CURSOR
bool "Enable a software cursor"
depends on CFB_CONSOLE
default y if CFB_CONSOLE
help
This draws a cursor after the last character. No blinking is
provided. This makes it possible to see the current cursor
position when entering text on the console. It is recommended to
enable this.
config CONSOLE_EXTRA_INFO
bool "Display additional board information"
depends on CFB_CONSOLE
help
Display additional board information strings that normally go to
the serial port. When this option is enabled, a board-specific
function video_get_info_str() is called to get the string for
each line of the display. The function should return the string,
which can be empty if there is nothing to display for that line.
config CONSOLE_SCROLL_LINES
int "Number of lines to scroll the console by"
depends on CFB_CONSOLE || DM_VIDEO || LCD
default 1
help
When the console need to be scrolled, this is the number of
lines to scroll by. It defaults to 1. Increasing this makes the
console jump but can help speed up operation when scrolling
is slow.
config VIDEO_CT69000
bool "Enable Chips & Technologies 69000 video driver"
depends on VIDEO
help
This enables a frame buffer driver for the Chips & Technologies
ct69000, a fairly old graphics device (circa 2000) which is used
on some hardware. It operates over the ISA bus, and supports
some acceleration features.
For the CT69000 and SMI_LYNXEM drivers, videomode is
selected via environment 'videomode'. Two different ways
are possible:
- "videomode=num" 'num' is a standard LiLo mode numbers.
Following standard modes are supported (* is default):
Colors 640x480 800x600 1024x768 1152x864 1280x1024
-------------+---------------------------------------------
8 bits | 0x301* 0x303 0x305 0x161 0x307
15 bits | 0x310 0x313 0x316 0x162 0x319
16 bits | 0x311 0x314 0x317 0x163 0x31A
24 bits | 0x312 0x315 0x318 ? 0x31B
-------------+---------------------------------------------
(i.e. setenv videomode 317; saveenv; reset;)
- "videomode=bootargs" all the video parameters are parsed
from the bootargs. (See drivers/video/videomodes.c)
config SYS_CONSOLE_BG_COL
hex "Background colour"
depends on CFB_CONSOLE || VIDEO_CT69000
default 0x00
help
Defines the background colour for the console. The value is from
0x00 to 0xff and the meaning depends on the graphics card.
Typically, 0x00 means black and 0xff means white. Do not set
the background and foreground to the same colour or you will see
nothing.
config SYS_CONSOLE_FG_COL
hex "Foreground colour"
depends on CFB_CONSOLE || VIDEO_CT69000
default 0xa0
help
Defines the foreground colour for the console. The value is from
0x00 to 0xff and the meaning depends on the graphics card.
Typically, 0x00 means black and 0xff means white. Do not set
the background and foreground to the same colour or you will see
nothing.
config LCD
bool "Enable legacy LCD support"
help
Define this to enable LCD support (for output to LCD display).
You will also need to select an LCD driver using an additional
CONFIG option. See the README for details. Drives which have been
converted to driver model will instead used CONFIG_DM_VIDEO.
endmenu