blob: 1d737ccd3e59d328b3629eaeaf04b4328e7ea878 [file] [log] [blame]
/*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
* Copyright Jasbir Matharu
* Copyright 2015 UDOO Team
*
* Configuration settings for the UDOO NEO board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <config_distro_defaults.h>
#include "mx6_common.h"
#include "imx6_spl.h"
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
#define CONFIG_MXC_UART
/* MMC Configuration */
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
/* Command definition */
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_SYS_MMC_ENV_DEV 0 /*USDHC2*/
/* Linux only */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdtfile=undefined\0" \
"fdt_addr=0x83000000\0" \
"fdt_addr_r=0x83000000\0" \
"ip_dyn=yes\0" \
"mmcdev=0\0" \
"mmcrootfstype=ext4\0" \
"findfdt="\
"if test $board_name = BASIC; then " \
"setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
"if test $board_name = BASICKS; then " \
"setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
"if test $board_name = FULL; then " \
"setenv fdtfile imx6sx-udoo-neo-full.dtb; fi; " \
"if test $board_name = EXTENDED; then " \
"setenv fdtfile imx6sx-udoo-neo-extended.dtb; fi; " \
"if test $fdtfile = UNDEFINED; then " \
"echo WARNING: Could not determine dtb to use; fi\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"ramdisk_addr_r=0x84000000\0" \
"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
BOOTENV
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(DHCP, dhcp, na)
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
"run distro_bootcmd"
#include <config_distro_bootcmd.h>
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Environment organization */
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
#define CONFIG_ENV_SIZE SZ_8K
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_IMX_THERMAL
/* I2C configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_SPEED 100000
/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE3000
#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
#define PFUZE3000_I2C_BUS 0
/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define CONFIG_FEC_ENET_DEV 0
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR 0x0
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_ETHPRIME "FEC0"
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#endif /* __CONFIG_H */