blob: bfd5fbd8d7387e9b454089061f9fc004832513e7 [file] [log] [blame]
/*
* Copyright 2015-2016 Toradex, Inc.
*
* Configuration settings for the Toradex VF50/VF61 modules.
*
* Based on vf610twr.h:
* Copyright 2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch/imx-regs.h>
#define CONFIG_VF610
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SYS_FSL_CLK
#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_BAUDRATE 115200
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define MTDIDS_DEFAULT "nand0=vf610_nfc"
#define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
"128k(vf-bcb)ro," \
"1408k(u-boot)ro," \
"512k(u-boot-env)," \
"-(ubi)"
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 1
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE ENET1_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_IPADDR 192.168.10.2
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
#define CONFIG_LOADADDR 0x80008000
#define CONFIG_FDTADDR 0x84000000
/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE 0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT 524288
#define SD_BOOTCMD \
"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
"nfsboot=run setup; " \
"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
"${setupargs} ${vidargs}; echo Booting from NFS...;" \
"dhcp ${kernel_addr_r} && " \
"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define UBI_BOOTCMD \
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
"ubiboot=run setup; " \
"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
"${setupargs} ${vidargs}; echo Booting from NAND...; " \
"ubi part ubi && " \
"ubi read ${kernel_addr_r} kernel && " \
"ubi read ${fdt_addr_r} dtb && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x82000000\0" \
"fdt_addr_r=0x84000000\0" \
"kernel_file=zImage\0" \
"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
"fdt_board=eval-v3\0" \
"fdt_fixup=;\0" \
"defargs=\0" \
"console=ttyLP0\0" \
"setup=setenv setupargs " \
"console=tty1 console=${console}" \
",${baudrate}n8 ${memargs}\0" \
"setsdupdate=mmc rescan && set interface mmc && " \
"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
"setusbupdate=usb start && set interface usb && " \
"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
"setupdate=run setsdupdate || run setusbupdate\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
SD_BOOTCMD \
NFS_BOOTCMD \
UBI_BOOTCMD
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#undef CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MEMTEST_START 0x80010000
#define CONFIG_SYS_MEMTEST_END 0x87C00000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)
#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Environment organization */
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
#define CONFIG_ENV_SIZE (8 * 1024)
#endif
#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE (64 * 2048)
#define CONFIG_ENV_RANGE (4 * 64 * 2048)
#define CONFIG_ENV_OFFSET (12 * 64 * 2048)
#endif
/* USB Host Support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_VF
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
/* USB DFU */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
/* USB Storage */
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#endif /* __CONFIG_H */