blob: 587ef601585ced8c63e1cc29680cb5021c59c813 [file] [log] [blame]
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/* #define DEBUG */
#include <common.h>
#include <flash.h>
#include <mtd/cfi_flash.h>
extern flash_info_t flash_info[]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
*/
/*-----------------------------------------------------------------------
* Set protection status for monitor sectors
*
* The monitor is always located in the _first_ Flash bank.
* If necessary you have to map the second bank at lower addresses.
*/
void
flash_protect (int flag, ulong from, ulong to, flash_info_t *info)
{
ulong b_end;
short s_end;
int i;
/* Do nothing if input data is bad. */
if (!info || info->sector_count == 0 || info->size == 0 || to < from) {
return;
}
s_end = info->sector_count - 1; /* index of last sector */
b_end = info->start[0] + info->size - 1; /* bank end address */
debug ("flash_protect %s: from 0x%08lX to 0x%08lX\n",
(flag & FLAG_PROTECT_SET) ? "ON" :
(flag & FLAG_PROTECT_CLEAR) ? "OFF" : "???",
from, to);
/* There is nothing to do if we have no data about the flash
* or the protect range and flash range don't overlap.
*/
if (info->flash_id == FLASH_UNKNOWN ||
to < info->start[0] || from > b_end) {
return;
}
for (i=0; i<info->sector_count; ++i) {
ulong end; /* last address in current sect */
end = (i == s_end) ? b_end : info->start[i + 1] - 1;
/* Update protection if any part of the sector
* is in the specified range.
*/
if (from <= end && to >= info->start[i]) {
if (flag & FLAG_PROTECT_CLEAR) {
#if defined(CONFIG_SYS_FLASH_PROTECTION)
flash_real_protect(info, i, 0);
#else
info->protect[i] = 0;
#endif /* CONFIG_SYS_FLASH_PROTECTION */
debug ("protect off %d\n", i);
}
else if (flag & FLAG_PROTECT_SET) {
#if defined(CONFIG_SYS_FLASH_PROTECTION)
flash_real_protect(info, i, 1);
#else
info->protect[i] = 1;
#endif /* CONFIG_SYS_FLASH_PROTECTION */
debug ("protect on %d\n", i);
}
}
}
}
/*-----------------------------------------------------------------------
*/
flash_info_t *
addr2info (ulong addr)
{
flash_info_t *info;
int i;
for (i=0, info = &flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
if (info->flash_id != FLASH_UNKNOWN &&
addr >= info->start[0] &&
/* WARNING - The '- 1' is needed if the flash
* is at the end of the address space, since
* info->start[0] + info->size wraps back to 0.
* Please don't change this unless you understand this.
*/
addr <= info->start[0] + info->size - 1) {
return (info);
}
}
return (NULL);
}
/*-----------------------------------------------------------------------
* Copy memory to flash.
* Make sure all target addresses are within Flash bounds,
* and no protected sectors are hit.
* Returns:
* ERR_OK 0 - OK
* ERR_TIMOUT 1 - write timeout
* ERR_NOT_ERASED 2 - Flash not erased
* ERR_PROTECTED 4 - target range includes protected sectors
* ERR_INVAL 8 - target address not in Flash memory
* ERR_ALIGN 16 - target address not aligned on boundary
* (only some targets require alignment)
*/
int
flash_write (char *src, ulong addr, ulong cnt)
{
int i;
ulong end = addr + cnt - 1;
flash_info_t *info_first = addr2info (addr);
flash_info_t *info_last = addr2info (end );
flash_info_t *info;
__maybe_unused char *src_orig = src;
__maybe_unused char *addr_orig = (char *)addr;
__maybe_unused ulong cnt_orig = cnt;
if (cnt == 0) {
return (ERR_OK);
}
if (!info_first || !info_last) {
return (ERR_INVAL);
}
for (info = info_first; info <= info_last; ++info) {
ulong b_end = info->start[0] + info->size; /* bank end addr */
short s_end = info->sector_count - 1;
for (i=0; i<info->sector_count; ++i) {
ulong e_addr = (i == s_end) ? b_end : info->start[i + 1];
if ((end >= info->start[i]) && (addr < e_addr) &&
(info->protect[i] != 0) ) {
return (ERR_PROTECTED);
}
}
}
/* finally write data to flash */
for (info = info_first; info <= info_last && cnt>0; ++info) {
ulong len;
len = info->start[0] + info->size - addr;
if (len > cnt)
len = cnt;
if ((i = write_buff(info, (uchar *)src, addr, len)) != 0) {
return (i);
}
cnt -= len;
addr += len;
src += len;
}
#if defined(CONFIG_FLASH_VERIFY)
if (memcmp(src_orig, addr_orig, cnt_orig)) {
printf("\nVerify failed!\n");
return ERR_PROG_ERROR;
}
#endif /* CONFIG_SYS_FLASH_VERIFY_AFTER_WRITE */
return (ERR_OK);
}
/*-----------------------------------------------------------------------
*/
void flash_perror (int err)
{
switch (err) {
case ERR_OK:
break;
case ERR_TIMOUT:
puts ("Timeout writing to Flash\n");
break;
case ERR_NOT_ERASED:
puts ("Flash not Erased\n");
break;
case ERR_PROTECTED:
puts ("Can't write to protected Flash sectors\n");
break;
case ERR_INVAL:
puts ("Outside available Flash\n");
break;
case ERR_ALIGN:
puts ("Start and/or end address not on sector boundary\n");
break;
case ERR_UNKNOWN_FLASH_VENDOR:
puts ("Unknown Vendor of Flash\n");
break;
case ERR_UNKNOWN_FLASH_TYPE:
puts ("Unknown Type of Flash\n");
break;
case ERR_PROG_ERROR:
puts ("General Flash Programming Error\n");
break;
case ERR_ABORTED:
puts("Flash Programming Aborted\n");
break;
default:
printf ("%s[%d] FIXME: rc=%d\n", __FILE__, __LINE__, err);
break;
}
}