board/sandisk/sansa_fuze_plus/sfp.c - uboot-imx - Git at Google

 /*
  * SanDisk Sansa Fuze Plus board
  *
  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
  *
  * Hardware investigation done by:
  *
  * Amaury Pouly <amaury.pouly@gmail.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <errno.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
 #include <asm/arch/iomux-mx23.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>

 DECLARE_GLOBAL_DATA_PTR;

 /*
  * Functions
  */
 int board_early_init_f(void)
 {
 	/* IO0 clock at 480MHz */
 	mxs_set_ioclk(MXC_IOCLK0, 480000);

 	/* SSP0 clock at 96MHz */
 	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);

 	return 0;
 }

 int dram_init(void)
 {
 	return mxs_dram_init();
 }

 #ifdef	CONFIG_CMD_MMC
 static int xfi3_mmc_cd(int id)
 {
 	switch (id) {
 	case 0:
 		/* The SSP_DETECT is inverted on this board. */
 		return gpio_get_value(MX23_PAD_SSP1_DETECT__GPIO_2_1);
 	case 1:
 		/* Internal eMMC always present */
 		return 1;
 	default:
 		return 0;
 	}
 }

 int board_mmc_init(bd_t *bis)
 {
 	int ret;

 	/* MicroSD slot */
 	gpio_direction_input(MX23_PAD_SSP1_DETECT__GPIO_2_1);
 	gpio_direction_output(MX23_PAD_GPMI_D08__GPIO_0_8, 0);
 	ret = mxsmmc_initialize(bis, 0, NULL, xfi3_mmc_cd);
 	if (ret)
 		return ret;

 	/* Internal eMMC */
 	gpio_direction_output(MX23_PAD_PWM3__GPIO_1_29, 0);
 	ret = mxsmmc_initialize(bis, 1, NULL, xfi3_mmc_cd);

 	return ret;
 }
 #endif

 #ifdef CONFIG_VIDEO_MXS
 #define	MUX_CONFIG_LCD	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
 const iomux_cfg_t iomux_lcd_gpio[] = {
 	MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D06__GPIO_1_6 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D07__GPIO_1_7 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D08__GPIO_1_8 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D09__GPIO_1_9 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D10__GPIO_1_10 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D11__GPIO_1_11 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D12__GPIO_1_12 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D13__GPIO_1_13 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D14__GPIO_1_14 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D15__GPIO_1_15 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D16__GPIO_1_16 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D17__GPIO_1_17 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_RESET__GPIO_1_18 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_RS__GPIO_1_19 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_WR__GPIO_1_20 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_CS__GPIO_1_21 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_ENABLE__GPIO_1_23 | MUX_CONFIG_LCD,
 };

 const iomux_cfg_t iomux_lcd_lcd[] = {
 	MX23_PAD_LCD_D00__LCD_D00 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D01__LCD_D01 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D02__LCD_D02 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D03__LCD_D03 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D04__LCD_D04 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D05__LCD_D05 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D06__LCD_D06 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D07__LCD_D07 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D08__LCD_D08 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D09__LCD_D09 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_RESET__LCD_RESET | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_RS__LCD_RS | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_WR__LCD_WR | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_CS__LCD_CS | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
 	MX23_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
 };

 static int mxsfb_read_register(uint32_t reg, uint32_t *value)
 {
 	iomux_cfg_t mux;
 	uint32_t val = 0;
 	int i;

 	/* Mangle the register offset. */
 	reg = ((reg & 0xff) << 1) | (((reg >> 8) & 0xff) << 10);

 	/*
 	 * The SmartLCD interface on MX233 can only do WRITE operation
 	 * via the LCDIF controller. Implement the READ operation by
 	 * fiddling with bits.
 	 */
 	mxs_iomux_setup_multiple_pads(iomux_lcd_gpio,
 		ARRAY_SIZE(iomux_lcd_gpio));

 	gpio_direction_output(MX23_PAD_LCD_RS__GPIO_1_19, 1);
 	gpio_direction_output(MX23_PAD_LCD_CS__GPIO_1_21, 1);
 	gpio_direction_output(MX23_PAD_LCD_WR__GPIO_1_20, 1);
 	gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 1);

 	for (i = 0; i < 18; i++) {
 		mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
 		gpio_direction_output(mux, 0);
 	}

 	udelay(2);
 	gpio_direction_output(MX23_PAD_LCD_RS__GPIO_1_19, 0);
 	udelay(1);
 	gpio_direction_output(MX23_PAD_LCD_CS__GPIO_1_21, 0);
 	udelay(1);
 	gpio_direction_output(MX23_PAD_LCD_WR__GPIO_1_20, 0);
 	udelay(1);

 	for (i = 0; i < 18; i++) {
 		mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
 		gpio_direction_output(mux, (reg >> i) & 1);
 	}
 	udelay(1);

 	gpio_direction_output(MX23_PAD_LCD_WR__GPIO_1_20, 1);
 	udelay(3);

 	for (i = 0; i < 18; i++) {
 		mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
 		gpio_direction_input(mux);
 	}
 	udelay(2);

 	gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 0);
 	udelay(1);
 	gpio_direction_output(MX23_PAD_LCD_RS__GPIO_1_19, 1);
 	udelay(1);
 	gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 1);
 	udelay(3);
 	gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 0);
 	udelay(2);

 	for (i = 0; i < 18; i++) {
 		mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
 		val |= !!gpio_get_value(mux) << i;
 	}
 	udelay(1);

 	gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 1);
 	udelay(1);
 	gpio_direction_output(MX23_PAD_LCD_CS__GPIO_1_21, 1);
 	udelay(1);

 	mxs_iomux_setup_multiple_pads(iomux_lcd_lcd,
 		ARRAY_SIZE(iomux_lcd_lcd));

 	/* Demangle the register value. */
 	*value = ((val >> 1) & 0xff) | ((val >> 2) & 0xff00);

 	writel(val, 0x2000);
 	return 0;
 }

 static int mxsfb_write_byte(uint32_t payload, const unsigned int data)
 {
 	struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
 	const unsigned int timeout = 0x10000;

 	/* What is going on here I do not know. FIXME */
 	payload = ((payload & 0xff) << 1) | (((payload >> 8) & 0xff) << 10);

 	if (mxs_wait_mask_clr(&regs->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
 			      timeout))
 		return -ETIMEDOUT;

 	writel((1 << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) |
 		(1 << LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET),
 		&regs->hw_lcdif_transfer_count);

 	writel(LCDIF_CTRL_DATA_SELECT | LCDIF_CTRL_RUN,
 		&regs->hw_lcdif_ctrl_clr);

 	if (data)
 		writel(LCDIF_CTRL_DATA_SELECT, &regs->hw_lcdif_ctrl_set);

 	writel(LCDIF_CTRL_RUN, &regs->hw_lcdif_ctrl_set);

 	if (mxs_wait_mask_clr(&regs->hw_lcdif_lcdif_stat_reg, 1 << 29,
 			      timeout))
 		return -ETIMEDOUT;

 	writel(payload, &regs->hw_lcdif_data);
 	return mxs_wait_mask_clr(&regs->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
 				 timeout);
 }

 static void mxsfb_write_register(uint32_t reg, uint32_t data)
 {
 	mxsfb_write_byte(reg, 0);
 	mxsfb_write_byte(data, 1);
 }

 static const struct {
 	uint8_t		reg;
 	uint8_t		delay;
 	uint16_t	val;
 } lcd_regs[] = {
 	{ 0xe5, 0  , 0x78f0 },
 	{ 0xe3, 0  , 0x3008 },
 	{ 0xe7, 0  , 0x0012 },
 	{ 0xef, 0  , 0x1231 },
 	{ 0x00, 0  , 0x0001 },
 	{ 0x01, 0  , 0x0100 },
 	{ 0x02, 0  , 0x0700 },
 	{ 0x03, 0  , 0x1030 },
 	{ 0x04, 0  , 0x0000 },
 	{ 0x08, 0  , 0x0207 },
 	{ 0x09, 0  , 0x0000 },
 	{ 0x0a, 0  , 0x0000 },
 	{ 0x0c, 0  , 0x0000 },
 	{ 0x0d, 0  , 0x0000 },
 	{ 0x0f, 0  , 0x0000 },
 	{ 0x10, 0  , 0x0000 },
 	{ 0x11, 0  , 0x0007 },
 	{ 0x12, 0  , 0x0000 },
 	{ 0x13, 20 , 0x0000 },
 	/* Wait 20 mS here. */
 	{ 0x10, 0  , 0x1290 },
 	{ 0x11, 50 , 0x0007 },
 	/* Wait 50 mS here. */
 	{ 0x12, 50 , 0x0019 },
 	/* Wait 50 mS here. */
 	{ 0x13, 0  , 0x1700 },
 	{ 0x29, 50 , 0x0014 },
 	/* Wait 50 mS here. */
 	{ 0x20, 0  , 0x0000 },
 	{ 0x21, 0  , 0x0000 },
 	{ 0x30, 0  , 0x0504 },
 	{ 0x31, 0  , 0x0007 },
 	{ 0x32, 0  , 0x0006 },
 	{ 0x35, 0  , 0x0106 },
 	{ 0x36, 0  , 0x0202 },
 	{ 0x37, 0  , 0x0504 },
 	{ 0x38, 0  , 0x0500 },
 	{ 0x39, 0  , 0x0706 },
 	{ 0x3c, 0  , 0x0204 },
 	{ 0x3d, 0  , 0x0202 },
 	{ 0x50, 0  , 0x0000 },
 	{ 0x51, 0  , 0x00ef },
 	{ 0x52, 0  , 0x0000 },
 	{ 0x53, 0  , 0x013f },
 	{ 0x60, 0  , 0xa700 },
 	{ 0x61, 0  , 0x0001 },
 	{ 0x6a, 0  , 0x0000 },
 	{ 0x2b, 50 , 0x000d },
 	/* Wait 50 mS here. */
 	{ 0x90, 0  , 0x0011 },
 	{ 0x92, 0  , 0x0600 },
 	{ 0x93, 0  , 0x0003 },
 	{ 0x95, 0  , 0x0110 },
 	{ 0x97, 0  , 0x0000 },
 	{ 0x98, 0  , 0x0000 },
 	{ 0x07, 0  , 0x0173 },
 };

 void board_mxsfb_system_setup(void)
 {
 	struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
 	uint32_t id;
 	int i;

 	/* Switch the LCDIF into System-Mode */
 	writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DOTCLK_MODE |
 		LCDIF_CTRL_BYPASS_COUNT, &regs->hw_lcdif_ctrl_clr);

 	/* To program the LCD, switch to 18bit bus + 18bit data. */
 	clrsetbits_le32(&regs->hw_lcdif_ctrl,
 		LCDIF_CTRL_WORD_LENGTH_MASK | LCDIF_CTRL_LCD_DATABUS_WIDTH_MASK,
 		LCDIF_CTRL_WORD_LENGTH_18BIT |
 		LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT);

 	mxsfb_read_register(0, &id);
 	writel(id, 0x2004);

 	/* Restart the SmartLCD controller */
 	mdelay(50);
 	writel(1, &regs->hw_lcdif_ctrl1_set);
 	mdelay(50);
 	writel(1, &regs->hw_lcdif_ctrl1_clr);
 	mdelay(50);
 	writel(1, &regs->hw_lcdif_ctrl1_set);
 	mdelay(50);

 	/* Program the SmartLCD controller */
 	writel(LCDIF_CTRL1_RECOVER_ON_UNDERFLOW, &regs->hw_lcdif_ctrl1_set);

 	writel((0x02 << LCDIF_TIMING_CMD_HOLD_OFFSET) |
 	       (0x02 << LCDIF_TIMING_CMD_SETUP_OFFSET) |
 	       (0x02 << LCDIF_TIMING_DATA_HOLD_OFFSET) |
 	       (0x01 << LCDIF_TIMING_DATA_SETUP_OFFSET),
 	       &regs->hw_lcdif_timing);

 	/*
 	 * ILI9325 init and configuration sequence.
 	 */
 	for (i = 0; i < ARRAY_SIZE(lcd_regs); i++) {
 		mxsfb_write_register(lcd_regs[i].reg, lcd_regs[i].val);
 		if (lcd_regs[i].delay)
 			mdelay(lcd_regs[i].delay);
 	}
 	/* Turn on Framebuffer Upload Mode */
 	mxsfb_write_byte(0x22, 0);

 	writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DATA_SELECT,
 		&regs->hw_lcdif_ctrl_set);

 	/* Operate the framebuffer in 16bit mode. */
 	clrsetbits_le32(&regs->hw_lcdif_ctrl,
 		LCDIF_CTRL_WORD_LENGTH_MASK | LCDIF_CTRL_LCD_DATABUS_WIDTH_MASK,
 		LCDIF_CTRL_WORD_LENGTH_16BIT |
 		LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT);
 }
 #endif

 int board_init(void)
 {
 	/* Adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

 	/* Turn on PWM backlight */
 	gpio_direction_output(MX23_PAD_PWM2__GPIO_1_28, 1);

 	return 0;
 }

 int board_eth_init(bd_t *bis)
 {
 	usb_eth_initialize(bis);
 	return 0;
 }
	/*
	* SanDisk Sansa Fuze Plus board
	*
	* Copyright (C) 2013 Marek Vasut <marex@denx.de>
	*
	* Hardware investigation done by:
	*
	* Amaury Pouly <amaury.pouly@gmail.com>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <errno.h>
	#include <asm/gpio.h>
	#include <asm/io.h>
	#include <asm/arch/iomux-mx23.h>
	#include <asm/arch/imx-regs.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/sys_proto.h>

	DECLARE_GLOBAL_DATA_PTR;

	/*
	* Functions
	*/
	int board_early_init_f(void)
	{
	/* IO0 clock at 480MHz */
	mxs_set_ioclk(MXC_IOCLK0, 480000);

	/* SSP0 clock at 96MHz */
	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);

	return 0;
	}

	int dram_init(void)
	{
	return mxs_dram_init();
	}

	#ifdef CONFIG_CMD_MMC
	static int xfi3_mmc_cd(int id)
	{
	switch (id) {
	case 0:
	/* The SSP_DETECT is inverted on this board. */
	return gpio_get_value(MX23_PAD_SSP1_DETECT__GPIO_2_1);
	case 1:
	/* Internal eMMC always present */
	return 1;
	default:
	return 0;
	}
	}

	int board_mmc_init(bd_t *bis)
	{
	int ret;

	/* MicroSD slot */
	gpio_direction_input(MX23_PAD_SSP1_DETECT__GPIO_2_1);
	gpio_direction_output(MX23_PAD_GPMI_D08__GPIO_0_8, 0);
	ret = mxsmmc_initialize(bis, 0, NULL, xfi3_mmc_cd);
	if (ret)
	return ret;

	/* Internal eMMC */
	gpio_direction_output(MX23_PAD_PWM3__GPIO_1_29, 0);
	ret = mxsmmc_initialize(bis, 1, NULL, xfi3_mmc_cd);

	return ret;
	}
	#endif

	#ifdef CONFIG_VIDEO_MXS
	#define MUX_CONFIG_LCD (MXS_PAD_3V3 \| MXS_PAD_4MA \| MXS_PAD_NOPULL)
	const iomux_cfg_t iomux_lcd_gpio[] = {
	MX23_PAD_LCD_D00__GPIO_1_0 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D01__GPIO_1_1 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D02__GPIO_1_2 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D03__GPIO_1_3 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D04__GPIO_1_4 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D05__GPIO_1_5 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D06__GPIO_1_6 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D07__GPIO_1_7 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D08__GPIO_1_8 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D09__GPIO_1_9 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D10__GPIO_1_10 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D11__GPIO_1_11 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D12__GPIO_1_12 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D13__GPIO_1_13 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D14__GPIO_1_14 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D15__GPIO_1_15 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D16__GPIO_1_16 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D17__GPIO_1_17 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_RESET__GPIO_1_18 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_RS__GPIO_1_19 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_WR__GPIO_1_20 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_CS__GPIO_1_21 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_ENABLE__GPIO_1_23 \| MUX_CONFIG_LCD,
	};

	const iomux_cfg_t iomux_lcd_lcd[] = {
	MX23_PAD_LCD_D00__LCD_D00 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D01__LCD_D01 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D02__LCD_D02 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D03__LCD_D03 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D04__LCD_D04 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D05__LCD_D05 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D06__LCD_D06 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D07__LCD_D07 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D08__LCD_D08 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D09__LCD_D09 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D10__LCD_D10 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D11__LCD_D11 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D12__LCD_D12 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D13__LCD_D13 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D14__LCD_D14 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D15__LCD_D15 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D16__LCD_D16 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_D17__LCD_D17 \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_RESET__LCD_RESET \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_RS__LCD_RS \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_WR__LCD_WR \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_CS__LCD_CS \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_ENABLE__LCD_ENABLE \| MUX_CONFIG_LCD,
	MX23_PAD_LCD_VSYNC__LCD_VSYNC \| MUX_CONFIG_LCD,
	};

	static int mxsfb_read_register(uint32_t reg, uint32_t *value)
	{
	iomux_cfg_t mux;
	uint32_t val = 0;
	int i;

	/* Mangle the register offset. */
	reg = ((reg & 0xff) << 1) \| (((reg >> 8) & 0xff) << 10);

	/*
	* The SmartLCD interface on MX233 can only do WRITE operation
	* via the LCDIF controller. Implement the READ operation by
	* fiddling with bits.
	*/
	mxs_iomux_setup_multiple_pads(iomux_lcd_gpio,
	ARRAY_SIZE(iomux_lcd_gpio));

	gpio_direction_output(MX23_PAD_LCD_RS__GPIO_1_19, 1);
	gpio_direction_output(MX23_PAD_LCD_CS__GPIO_1_21, 1);
	gpio_direction_output(MX23_PAD_LCD_WR__GPIO_1_20, 1);
	gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 1);

	for (i = 0; i < 18; i++) {
	mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
	gpio_direction_output(mux, 0);
	}

	udelay(2);
	gpio_direction_output(MX23_PAD_LCD_RS__GPIO_1_19, 0);
	udelay(1);
	gpio_direction_output(MX23_PAD_LCD_CS__GPIO_1_21, 0);
	udelay(1);
	gpio_direction_output(MX23_PAD_LCD_WR__GPIO_1_20, 0);
	udelay(1);

	for (i = 0; i < 18; i++) {
	mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
	gpio_direction_output(mux, (reg >> i) & 1);
	}
	udelay(1);

	gpio_direction_output(MX23_PAD_LCD_WR__GPIO_1_20, 1);
	udelay(3);

	for (i = 0; i < 18; i++) {
	mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
	gpio_direction_input(mux);
	}
	udelay(2);

	gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 0);
	udelay(1);
	gpio_direction_output(MX23_PAD_LCD_RS__GPIO_1_19, 1);
	udelay(1);
	gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 1);
	udelay(3);
	gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 0);
	udelay(2);

	for (i = 0; i < 18; i++) {
	mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
	val \|= !!gpio_get_value(mux) << i;
	}
	udelay(1);

	gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 1);
	udelay(1);
	gpio_direction_output(MX23_PAD_LCD_CS__GPIO_1_21, 1);
	udelay(1);

	mxs_iomux_setup_multiple_pads(iomux_lcd_lcd,
	ARRAY_SIZE(iomux_lcd_lcd));

	/* Demangle the register value. */
	*value = ((val >> 1) & 0xff) \| ((val >> 2) & 0xff00);

	writel(val, 0x2000);
	return 0;
	}

	static int mxsfb_write_byte(uint32_t payload, const unsigned int data)
	{
	struct mxs_lcdif_regs regs = (struct mxs_lcdif_regs )MXS_LCDIF_BASE;
	const unsigned int timeout = 0x10000;

	/* What is going on here I do not know. FIXME */
	payload = ((payload & 0xff) << 1) \| (((payload >> 8) & 0xff) << 10);

	if (mxs_wait_mask_clr(&regs->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
	timeout))
	return -ETIMEDOUT;

	writel((1 << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) \|
	(1 << LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET),
	&regs->hw_lcdif_transfer_count);

	writel(LCDIF_CTRL_DATA_SELECT \| LCDIF_CTRL_RUN,
	&regs->hw_lcdif_ctrl_clr);

	if (data)
	writel(LCDIF_CTRL_DATA_SELECT, &regs->hw_lcdif_ctrl_set);

	writel(LCDIF_CTRL_RUN, &regs->hw_lcdif_ctrl_set);

	if (mxs_wait_mask_clr(&regs->hw_lcdif_lcdif_stat_reg, 1 << 29,
	timeout))
	return -ETIMEDOUT;

	writel(payload, &regs->hw_lcdif_data);
	return mxs_wait_mask_clr(&regs->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
	timeout);
	}

	static void mxsfb_write_register(uint32_t reg, uint32_t data)
	{
	mxsfb_write_byte(reg, 0);
	mxsfb_write_byte(data, 1);
	}

	static const struct {
	uint8_t reg;
	uint8_t delay;
	uint16_t val;
	} lcd_regs[] = {
	{ 0xe5, 0 , 0x78f0 },
	{ 0xe3, 0 , 0x3008 },
	{ 0xe7, 0 , 0x0012 },
	{ 0xef, 0 , 0x1231 },
	{ 0x00, 0 , 0x0001 },
	{ 0x01, 0 , 0x0100 },
	{ 0x02, 0 , 0x0700 },
	{ 0x03, 0 , 0x1030 },
	{ 0x04, 0 , 0x0000 },
	{ 0x08, 0 , 0x0207 },
	{ 0x09, 0 , 0x0000 },
	{ 0x0a, 0 , 0x0000 },
	{ 0x0c, 0 , 0x0000 },
	{ 0x0d, 0 , 0x0000 },
	{ 0x0f, 0 , 0x0000 },
	{ 0x10, 0 , 0x0000 },
	{ 0x11, 0 , 0x0007 },
	{ 0x12, 0 , 0x0000 },
	{ 0x13, 20 , 0x0000 },
	/* Wait 20 mS here. */
	{ 0x10, 0 , 0x1290 },
	{ 0x11, 50 , 0x0007 },
	/* Wait 50 mS here. */
	{ 0x12, 50 , 0x0019 },
	/* Wait 50 mS here. */
	{ 0x13, 0 , 0x1700 },
	{ 0x29, 50 , 0x0014 },
	/* Wait 50 mS here. */
	{ 0x20, 0 , 0x0000 },
	{ 0x21, 0 , 0x0000 },
	{ 0x30, 0 , 0x0504 },
	{ 0x31, 0 , 0x0007 },
	{ 0x32, 0 , 0x0006 },
	{ 0x35, 0 , 0x0106 },
	{ 0x36, 0 , 0x0202 },
	{ 0x37, 0 , 0x0504 },
	{ 0x38, 0 , 0x0500 },
	{ 0x39, 0 , 0x0706 },
	{ 0x3c, 0 , 0x0204 },
	{ 0x3d, 0 , 0x0202 },
	{ 0x50, 0 , 0x0000 },
	{ 0x51, 0 , 0x00ef },
	{ 0x52, 0 , 0x0000 },
	{ 0x53, 0 , 0x013f },
	{ 0x60, 0 , 0xa700 },
	{ 0x61, 0 , 0x0001 },
	{ 0x6a, 0 , 0x0000 },
	{ 0x2b, 50 , 0x000d },
	/* Wait 50 mS here. */
	{ 0x90, 0 , 0x0011 },
	{ 0x92, 0 , 0x0600 },
	{ 0x93, 0 , 0x0003 },
	{ 0x95, 0 , 0x0110 },
	{ 0x97, 0 , 0x0000 },
	{ 0x98, 0 , 0x0000 },
	{ 0x07, 0 , 0x0173 },
	};

	void board_mxsfb_system_setup(void)
	{
	struct mxs_lcdif_regs regs = (struct mxs_lcdif_regs )MXS_LCDIF_BASE;
	uint32_t id;
	int i;

	/* Switch the LCDIF into System-Mode */
	writel(LCDIF_CTRL_LCDIF_MASTER \| LCDIF_CTRL_DOTCLK_MODE \|
	LCDIF_CTRL_BYPASS_COUNT, &regs->hw_lcdif_ctrl_clr);

	/* To program the LCD, switch to 18bit bus + 18bit data. */
	clrsetbits_le32(&regs->hw_lcdif_ctrl,
	LCDIF_CTRL_WORD_LENGTH_MASK \| LCDIF_CTRL_LCD_DATABUS_WIDTH_MASK,
	LCDIF_CTRL_WORD_LENGTH_18BIT \|
	LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT);

	mxsfb_read_register(0, &id);
	writel(id, 0x2004);

	/* Restart the SmartLCD controller */
	mdelay(50);
	writel(1, &regs->hw_lcdif_ctrl1_set);
	mdelay(50);
	writel(1, &regs->hw_lcdif_ctrl1_clr);
	mdelay(50);
	writel(1, &regs->hw_lcdif_ctrl1_set);
	mdelay(50);

	/* Program the SmartLCD controller */
	writel(LCDIF_CTRL1_RECOVER_ON_UNDERFLOW, &regs->hw_lcdif_ctrl1_set);

	writel((0x02 << LCDIF_TIMING_CMD_HOLD_OFFSET) \|
	(0x02 << LCDIF_TIMING_CMD_SETUP_OFFSET) \|
	(0x02 << LCDIF_TIMING_DATA_HOLD_OFFSET) \|
	(0x01 << LCDIF_TIMING_DATA_SETUP_OFFSET),
	&regs->hw_lcdif_timing);

	/*
	* ILI9325 init and configuration sequence.
	*/
	for (i = 0; i < ARRAY_SIZE(lcd_regs); i++) {
	mxsfb_write_register(lcd_regs[i].reg, lcd_regs[i].val);
	if (lcd_regs[i].delay)
	mdelay(lcd_regs[i].delay);
	}
	/* Turn on Framebuffer Upload Mode */
	mxsfb_write_byte(0x22, 0);

	writel(LCDIF_CTRL_LCDIF_MASTER \| LCDIF_CTRL_DATA_SELECT,
	&regs->hw_lcdif_ctrl_set);

	/* Operate the framebuffer in 16bit mode. */
	clrsetbits_le32(&regs->hw_lcdif_ctrl,
	LCDIF_CTRL_WORD_LENGTH_MASK \| LCDIF_CTRL_LCD_DATABUS_WIDTH_MASK,
	LCDIF_CTRL_WORD_LENGTH_16BIT \|
	LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT);
	}
	#endif

	int board_init(void)
	{
	/* Adress of boot parameters */
	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

	/* Turn on PWM backlight */
	gpio_direction_output(MX23_PAD_PWM2__GPIO_1_28, 1);

	return 0;
	}

	int board_eth_init(bd_t *bis)
	{
	usb_eth_initialize(bis);
	return 0;
	}