blob: b565538dc37e73e6c221d7b572b8940e61c3bfa7 [file] [log] [blame]
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch-mx6/clock.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/mxc_i2c.h>
#include <asm/io.h>
#include <common.h>
#include <fsl_esdhc.h>
#include <i2c.h>
#include <linux/sizes.h>
#include <linux/fb.h>
#include <miiphy.h>
#include <mmc.h>
#include <mxsfb.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include "../common/pfuze.h"
#include <usb.h>
#include <usb/ehci-ci.h>
#if defined(CONFIG_MXC_EPDC)
#include <lcd.h>
#include <mxc_epdc_fb.h>
#endif
#include <asm/imx-common/video.h>
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define USDHC_PAD_CTRL_WP (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE)
#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
#define EPDC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
#ifdef CONFIG_SYS_I2C
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/* I2C1 for PMIC and EPD */
struct i2c_pads_info i2c_pad_info1 = {
.scl = {
/* conflict with usb_otg2_pwr */
.i2c_mode = MX6_PAD_I2C1_SCL__I2C1_SCL | PC,
.gpio_mode = MX6_PAD_I2C1_SCL__GPIO3_IO12 | PC,
.gp = IMX_GPIO_NR(3, 12),
},
.sda = {
/* conflict with usb_otg2_oc */
.i2c_mode = MX6_PAD_I2C1_SDA__I2C1_SDA | PC,
.gpio_mode = MX6_PAD_I2C1_SDA__GPIO3_IO13 | PC,
.gp = IMX_GPIO_NR(3, 13),
},
};
/* I2C2 for LCD and ADV */
struct i2c_pads_info i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6_PAD_I2C2_SCL__I2C2_SCL | PC,
.gpio_mode = MX6_PAD_I2C2_SCL__GPIO3_IO14 | PC,
.gp = IMX_GPIO_NR(3, 14),
},
.sda = {
.i2c_mode = MX6_PAD_I2C2_SDA__I2C2_SDA | PC,
.gpio_mode = MX6_PAD_I2C2_SDA__GPIO3_IO15 | PC,
.gp = IMX_GPIO_NR(3, 15),
},
};
#endif
int dram_init(void)
{
gd->ram_size = PHYS_SDRAM_SIZE;
return 0;
}
static iomux_v3_cfg_t const wdog_pads[] = {
MX6_PAD_WDOG_B__WDOG1_B | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static iomux_v3_cfg_t const led_pads[] = {
MX6_PAD_EPDC_VCOM1__GPIO2_IO04 | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static iomux_v3_cfg_t const uart1_pads[] = {
MX6_PAD_UART1_TXD__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_UART1_RXD__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
/* 8bit SD1 */
static iomux_v3_cfg_t const usdhc1_pads[] = {
MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA4__SD1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA5__SD1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA6__SD1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_DATA7__SD1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
/* CD */
MX6_PAD_KEY_ROW7__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* WP */
MX6_PAD_GPIO4_IO22__SD1_WP | MUX_PAD_CTRL(NO_PAD_CTRL),
};
/* EMMC */
static iomux_v3_cfg_t const usdhc2_pads[] = {
MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DATA0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DATA1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DATA2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DATA3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DATA4__SD2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DATA5__SD2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DATA6__SD2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DATA7__SD2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
/* DQS */
MX6_PAD_GPIO4_IO21__SD2_STROBE | MUX_PAD_CTRL(NO_PAD_CTRL),
/* RST_B */
MX6_PAD_SD2_RESET__GPIO4_IO27 | MUX_PAD_CTRL(USDHC_PAD_CTRL | PAD_CTL_LVE),
};
/* Wifi SD */
static iomux_v3_cfg_t const usdhc3_pads[] = {
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
/* CD */
MX6_PAD_REF_CLK_32K__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
imx_iomux_v3_setup_multiple_pads(led_pads, ARRAY_SIZE(led_pads));
}
#ifdef CONFIG_FSL_ESDHC
static struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = {
{USDHC1_BASE_ADDR, 0, 8, 1},
{USDHC2_BASE_ADDR, 0, 8, 0, 1}, /* fixed 1.8v IO voltage for eMMC chip */
{USDHC3_BASE_ADDR, 0, 4},
};
#define USDHC1_CD_GPIO IMX_GPIO_NR(4, 7)
#define USDHC2_PWR_GPIO IMX_GPIO_NR(4, 27)
#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 22)
int board_mmc_get_env_dev(int devno)
{
return devno;
}
int mmc_map_to_kernel_blk(int devno)
{
return devno;
}
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret = 0;
switch (cfg->esdhc_base) {
case USDHC1_BASE_ADDR:
ret = !gpio_get_value(USDHC1_CD_GPIO);
break;
case USDHC2_BASE_ADDR:
ret = 1;
break;
case USDHC3_BASE_ADDR:
ret = !gpio_get_value(USDHC3_CD_GPIO);
break;
}
return ret;
}
int board_mmc_init(bd_t *bis)
{
int i;
/*
* According to the board_mmc_init() the following map is done:
* (U-boot device node) (Physical Port)
* mmc0 USDHC1
* mmc1 USDHC2
* mmc2 USDHC3
*/
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
switch (i) {
case 0:
imx_iomux_v3_setup_multiple_pads(
usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
gpio_request(USDHC1_CD_GPIO, "usdhc1 cd");
gpio_direction_input(USDHC1_CD_GPIO);
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
break;
case 1:
imx_iomux_v3_setup_multiple_pads(
usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
gpio_request(USDHC2_PWR_GPIO, "usdhc2 pwr");
gpio_direction_output(USDHC2_PWR_GPIO, 1);
break;
case 2:
imx_iomux_v3_setup_multiple_pads(
usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
gpio_request(USDHC3_CD_GPIO, "usdhc3 cd");
gpio_direction_input(USDHC3_CD_GPIO);
usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
break;
default:
printf("Warning: you configured more USDHC controllers (%d) than supported by the board\n", i + 1);
return 0;
}
if (fsl_esdhc_initialize(bis, &usdhc_cfg[i]))
printf("Warning: failed to initialize mmc dev %d\n", i);
}
return 0;
}
#endif
#ifdef CONFIG_POWER
#define I2C_PMIC 0
static struct pmic *pfuze;
int power_init_board(void)
{
int ret;
u32 rev_id, value;
ret = power_pfuze100_init(I2C_PMIC);
if (ret)
return ret;
pfuze = pmic_get("PFUZE100");
if (!pfuze)
return -ENODEV;
ret = pmic_probe(pfuze);
if (ret)
return ret;
ret = pfuze_mode_init(pfuze, APS_PFM);
if (ret < 0)
return ret;
pmic_reg_read(pfuze, PFUZE100_DEVICEID, &value);
pmic_reg_read(pfuze, PFUZE100_REVID, &rev_id);
printf("PMIC: PFUZE100! DEV_ID=0x%x REV_ID=0x%x\n", value, rev_id);
/* set SW1AB standby volatage 0.975V */
pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &value);
value &= ~0x3f;
value |= PFUZE100_SW1ABC_SETP(9750);
pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, value);
/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &value);
value &= ~0xc0;
value |= 0x40;
pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, value);
/* set SW1C staby volatage 0.975V */
pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &value);
value &= ~0x3f;
value |= 0x1b;
pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, value);
/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &value);
value &= ~0xc0;
value |= 0x40;
pmic_reg_write(pfuze, PFUZE100_SW1CCONF, value);
return 0;
}
#elif defined(CONFIG_DM_PMIC_PFUZE100)
int power_init_board(void)
{
struct udevice *dev;
int ret;
dev = pfuze_common_init();
if (!dev)
return -ENODEV;
ret = pfuze_mode_init(dev, APS_PFM);
if (ret < 0)
return ret;
return 0;
}
#endif
#ifdef CONFIG_MXC_SPI
iomux_v3_cfg_t const ecspi1_pads[] = {
MX6_PAD_ECSPI1_SCLK__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_ECSPI1_MOSI__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_ECSPI1_MISO__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
/* CS0 */
MX6_PAD_ECSPI1_SS0__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
void setup_spinor(void)
{
imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
ARRAY_SIZE(ecspi1_pads));
gpio_request(IMX_GPIO_NR(4, 11), "escpi cs");
gpio_direction_output(IMX_GPIO_NR(4, 11), 0);
}
int board_spi_cs_gpio(unsigned bus, unsigned cs)
{
return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 11)) : -1;
}
#endif
#ifdef CONFIG_VIDEO_MXS
static iomux_v3_cfg_t const lcd_pads[] = {
MX6_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA00__LCD_DATA00 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA01__LCD_DATA01 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA02__LCD_DATA02 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA03__LCD_DATA03 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA04__LCD_DATA04 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA05__LCD_DATA05 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA06__LCD_DATA06 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA07__LCD_DATA07 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA08__LCD_DATA08 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA09__LCD_DATA09 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA18__LCD_DATA18 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA19__LCD_DATA19 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA20__LCD_DATA20 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA21__LCD_DATA21 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA22__LCD_DATA22 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_LCD_DATA23__LCD_DATA23 | MUX_PAD_CTRL(LCD_PAD_CTRL),
MX6_PAD_ECSPI1_SCLK__GPIO4_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_LCD_RESET__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* Use GPIO for Brightness adjustment, duty cycle = period */
MX6_PAD_PWM1__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
void do_enable_parallel_lcd(struct display_info_t const *dev)
{
int ret;
ret = enable_lcdif_clock(dev->bus, 1);
if (ret) {
printf("Enable LCDIF clock failed, %d\n", ret);
return;
}
imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
/* Reset the LCD */
gpio_request(IMX_GPIO_NR(2, 19), "lcd reset");
gpio_direction_output(IMX_GPIO_NR(2, 19) , 0);
udelay(500);
gpio_direction_output(IMX_GPIO_NR(2, 19) , 1);
gpio_request(IMX_GPIO_NR(4, 8), "lcd pwr en");
gpio_direction_output(IMX_GPIO_NR(4, 8) , 1);
/* Set Brightness to high */
gpio_request(IMX_GPIO_NR(3, 23), "backlight");
gpio_direction_output(IMX_GPIO_NR(3, 23) , 1);
}
struct display_info_t const displays[] = {{
.bus = MX6SLL_LCDIF_BASE_ADDR,
.addr = 0,
.pixfmt = 24,
.detect = NULL,
.enable = do_enable_parallel_lcd,
.mode = {
.name = "MCIMX28LCD",
.xres = 800,
.yres = 480,
.pixclock = 29850,
.left_margin = 89,
.right_margin = 164,
.upper_margin = 23,
.lower_margin = 10,
.hsync_len = 10,
.vsync_len = 10,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED
} } };
size_t display_count = ARRAY_SIZE(displays);
#endif
#ifdef CONFIG_MXC_EPDC
static iomux_v3_cfg_t const epdc_enable_pads[] = {
MX6_PAD_EPDC_DATA00__EPDC_DATA00 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA01__EPDC_DATA01 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA02__EPDC_DATA02 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA03__EPDC_DATA03 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA04__EPDC_DATA04 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA05__EPDC_DATA05 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA06__EPDC_DATA06 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA07__EPDC_DATA07 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA08__EPDC_DATA08 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA09__EPDC_DATA09 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA10__EPDC_DATA10 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA11__EPDC_DATA11 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA12__EPDC_DATA12 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA13__EPDC_DATA13 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA14__EPDC_DATA14 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_DATA15__EPDC_DATA15 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_SDCLK__EPDC_SDCLK_P | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_SDLE__EPDC_SDLE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_SDOE__EPDC_SDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_SDSHR__EPDC_SDSHR | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_SDCE0__EPDC_SDCE0 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_GDCLK__EPDC_GDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_GDOE__EPDC_GDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_GDRL__EPDC_GDRL | MUX_PAD_CTRL(EPDC_PAD_CTRL),
MX6_PAD_EPDC_GDSP__EPDC_GDSP | MUX_PAD_CTRL(EPDC_PAD_CTRL),
};
static iomux_v3_cfg_t const epdc_disable_pads[] = {
MX6_PAD_EPDC_DATA01__GPIO1_IO08,
MX6_PAD_EPDC_DATA02__GPIO1_IO09,
MX6_PAD_EPDC_DATA03__GPIO1_IO10,
MX6_PAD_EPDC_DATA04__GPIO1_IO11,
MX6_PAD_EPDC_DATA05__GPIO1_IO12,
MX6_PAD_EPDC_DATA06__GPIO1_IO13,
MX6_PAD_EPDC_DATA07__GPIO1_IO14,
MX6_PAD_EPDC_DATA08__GPIO1_IO15,
MX6_PAD_EPDC_DATA09__GPIO1_IO16,
MX6_PAD_EPDC_DATA10__GPIO1_IO17,
MX6_PAD_EPDC_DATA11__GPIO1_IO18,
MX6_PAD_EPDC_DATA12__GPIO1_IO19,
MX6_PAD_EPDC_DATA13__GPIO1_IO20,
MX6_PAD_EPDC_DATA14__GPIO1_IO21,
MX6_PAD_EPDC_DATA15__GPIO1_IO22,
MX6_PAD_EPDC_SDCLK__GPIO1_IO23,
MX6_PAD_EPDC_SDLE__GPIO1_IO24,
MX6_PAD_EPDC_SDOE__GPIO1_IO25,
MX6_PAD_EPDC_SDSHR__GPIO1_IO26,
MX6_PAD_EPDC_SDCE0__GPIO1_IO27,
MX6_PAD_EPDC_GDCLK__GPIO1_IO31,
MX6_PAD_EPDC_GDOE__GPIO2_IO00,
MX6_PAD_EPDC_GDRL__GPIO2_IO01,
MX6_PAD_EPDC_GDSP__GPIO2_IO02,
};
vidinfo_t panel_info = {
.vl_refresh = 85,
.vl_col = 1024,
.vl_row = 758,
.vl_pixclock = 40000000,
.vl_left_margin = 12,
.vl_right_margin = 76,
.vl_upper_margin = 4,
.vl_lower_margin = 5,
.vl_hsync = 12,
.vl_vsync = 2,
.vl_sync = 0,
.vl_mode = 0,
.vl_flag = 0,
.vl_bpix = 3,
.cmap = 0,
};
struct epdc_timing_params panel_timings = {
.vscan_holdoff = 4,
.sdoed_width = 10,
.sdoed_delay = 20,
.sdoez_width = 10,
.sdoez_delay = 20,
.gdclk_hp_offs = 524,
.gdsp_offs = 327,
.gdoe_offs = 0,
.gdclk_offs = 19,
.num_ce = 1,
};
static void setup_epdc_power(void)
{
/* Setup epdc voltage */
/* EPDC_PWRSTAT - GPIO2[13] for PWR_GOOD status */
imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWR_STAT__GPIO2_IO13 |
MUX_PAD_CTRL(EPDC_PAD_CTRL));
gpio_request(IMX_GPIO_NR(2, 13), "EPDC_PWRSTAT");
gpio_direction_input(IMX_GPIO_NR(2, 13));
/* EPDC_VCOM0 - GPIO2[03] for VCOM control */
imx_iomux_v3_setup_pad(MX6_PAD_EPDC_VCOM0__GPIO2_IO03 |
MUX_PAD_CTRL(EPDC_PAD_CTRL));
/* Set as output */
gpio_request(IMX_GPIO_NR(2, 3), "EPDC_VCOM0");
gpio_direction_output(IMX_GPIO_NR(2, 3), 1);
/* EPDC_PWRWAKEUP - GPIO2[14] for EPD PMIC WAKEUP */
imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWR_WAKE__GPIO2_IO14 |
MUX_PAD_CTRL(EPDC_PAD_CTRL));
/* Set as output */
gpio_request(IMX_GPIO_NR(2, 14), "EPDC_PWRWAKEUP");
gpio_direction_output(IMX_GPIO_NR(2, 14), 1);
/* EPDC_PWRCTRL0 - GPIO2[07] for EPD PWR CTL0 */
imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 |
MUX_PAD_CTRL(EPDC_PAD_CTRL));
/* Set as output */
gpio_request(IMX_GPIO_NR(2, 7), "EPDC_PWRCTRL0");
gpio_direction_output(IMX_GPIO_NR(2, 7), 1);
}
static void epdc_enable_pins(void)
{
/* epdc iomux settings */
imx_iomux_v3_setup_multiple_pads(epdc_enable_pads,
ARRAY_SIZE(epdc_enable_pads));
}
static void epdc_disable_pins(void)
{
/* Configure MUX settings for EPDC pins to GPIO and drive to 0 */
imx_iomux_v3_setup_multiple_pads(epdc_disable_pads,
ARRAY_SIZE(epdc_disable_pads));
}
static void setup_epdc(void)
{
/*** epdc Maxim PMIC settings ***/
/* EPDC_PWRSTAT - GPIO2[13] for PWR_GOOD status */
imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWR_STAT__GPIO2_IO13 |
MUX_PAD_CTRL(EPDC_PAD_CTRL));
/* EPDC_VCOM0 - GPIO2[03] for VCOM control */
imx_iomux_v3_setup_pad(MX6_PAD_EPDC_VCOM0__GPIO2_IO03 |
MUX_PAD_CTRL(EPDC_PAD_CTRL));
/* EPDC_PWRWAKEUP - GPIO2[14] for EPD PMIC WAKEUP */
imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWR_WAKE__GPIO2_IO14 |
MUX_PAD_CTRL(EPDC_PAD_CTRL));
/* EPDC_PWRCTRL0 - GPIO2[07] for EPD PWR CTL0 */
imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 |
MUX_PAD_CTRL(EPDC_PAD_CTRL));
/* Set pixel clock rates for EPDC in clock.c */
panel_info.epdc_data.wv_modes.mode_init = 0;
panel_info.epdc_data.wv_modes.mode_du = 1;
panel_info.epdc_data.wv_modes.mode_gc4 = 3;
panel_info.epdc_data.wv_modes.mode_gc8 = 2;
panel_info.epdc_data.wv_modes.mode_gc16 = 2;
panel_info.epdc_data.wv_modes.mode_gc32 = 2;
panel_info.epdc_data.epdc_timings = panel_timings;
setup_epdc_power();
}
void epdc_power_on(void)
{
unsigned int reg;
struct gpio_regs *gpio_regs = (struct gpio_regs *)GPIO2_BASE_ADDR;
/* Set EPD_PWR_CTL0 to high - enable EINK_VDD (3.15) */
gpio_set_value(IMX_GPIO_NR(2, 7), 1);
udelay(1000);
/* Enable epdc signal pin */
epdc_enable_pins();
/* Set PMIC Wakeup to high - enable Display power */
gpio_set_value(IMX_GPIO_NR(2, 14), 1);
/* Wait for PWRGOOD == 1 */
while (1) {
reg = readl(&gpio_regs->gpio_psr);
if (!(reg & (1 << 13)))
break;
udelay(100);
}
/* Enable VCOM */
gpio_set_value(IMX_GPIO_NR(2, 3), 1);
udelay(500);
}
void epdc_power_off(void)
{
/* Set PMIC Wakeup to low - disable Display power */
gpio_set_value(IMX_GPIO_NR(2, 14), 0);
/* Disable VCOM */
gpio_set_value(IMX_GPIO_NR(2, 3), 0);
epdc_disable_pins();
/* Set EPD_PWR_CTL0 to low - disable EINK_VDD (3.15) */
gpio_set_value(IMX_GPIO_NR(2, 7), 0);
}
#endif
#ifdef CONFIG_USB_EHCI_MX6
#ifndef CONFIG_DM_USB
#define USB_OTHERREGS_OFFSET 0x800
#define UCTRL_PWR_POL (1 << 9)
iomux_v3_cfg_t const usb_otg1_pads[] = {
MX6_PAD_KEY_COL4__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_KEY_ROW4__USB_OTG1_OC | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_EPDC_PWR_COM__USB_OTG1_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
};
iomux_v3_cfg_t const usb_otg2_pads[] = {
MX6_PAD_KEY_COL5__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_ECSPI2_SCLK__USB_OTG2_OC | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_EPDC_PWR_IRQ__USB_OTG2_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
};
int board_usb_phy_mode(int port)
{
return usb_phy_mode(port);
}
int board_ehci_hcd_init(int port)
{
u32 *usbnc_usb_ctrl;
if (port > 1)
return -EINVAL;
switch (port) {
case 0:
imx_iomux_v3_setup_multiple_pads(usb_otg1_pads,
ARRAY_SIZE(usb_otg1_pads));
break;
case 1:
imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
ARRAY_SIZE(usb_otg2_pads));
break;
default:
printf("MXC USB port %d not yet supported\n", port);
return 1;
}
usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
port * 4);
/* Set Power polarity */
setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
return 0;
}
#endif
#endif
int board_early_init_f(void)
{
setup_iomux_uart();
enable_uart_clk(true);
return 0;
}
int board_init(void)
{
/* Address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
#ifdef CONFIG_SYS_I2C
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
#endif
#ifdef CONFIG_MXC_SPI
setup_spinor();
#endif
#ifdef CONFIG_MXC_EPDC
enable_epdc_clock();
setup_epdc();
#endif
return 0;
}
int board_late_init(void)
{
#ifdef CONFIG_ENV_IS_IN_MMC
board_late_mmc_env_init();
#endif
imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
set_wdog_reset((struct wdog_regs *)WDOG1_BASE_ADDR);
return 0;
}
u32 get_board_rev(void)
{
return get_cpu_rev();
}
int checkboard(void)
{
#ifdef CONFIG_LPDDR2
puts("Board: MX6SLL LPDDR2 ARM2\n");
#else
puts("Board: MX6SLL LPDDR3 ARM2\n");
#endif
return 0;
}