blob: bf3e08a8cf9dcad6bddcfb072183223c6c7ec682 [file] [log] [blame]
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*
* This file handles the board muxing between the RGMII/SGMII PHYs on
* Freescale LS1021AQDS board. The RGMII PHYs are the three on-board 1Gb
* ports. The SGMII PHYs are provided by the standard Freescale four-port
* SGMII riser card.
*
* Muxing is handled via the PIXIS BRDCFG4 register. The EMI1 bits control
* muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII depends
* on which port is used. The value for SGMII depends on which slot the riser
* is inserted in.
*/
#include <common.h>
#include <netdev.h>
#include <asm/arch/fsl_serdes.h>
#include <fsl_mdio.h>
#include <tsec.h>
#include <malloc.h>
#include "../common/sgmii_riser.h"
#include "../common/qixis.h"
#define EMI1_MASK 0x1f
#define EMI1_RGMII0 1
#define EMI1_RGMII1 2
#define EMI1_RGMII2 3
#define EMI1_SGMII1 0x1c
#define EMI1_SGMII2 0x1d
struct ls1021a_mdio {
struct mii_dev *realbus;
};
static void ls1021a_mux_mdio(int addr)
{
u8 brdcfg4;
brdcfg4 = QIXIS_READ(brdcfg[4]);
brdcfg4 &= EMI1_MASK;
switch (addr) {
case EMI1_RGMII0:
brdcfg4 |= 0;
break;
case EMI1_RGMII1:
brdcfg4 |= 0x20;
break;
case EMI1_RGMII2:
brdcfg4 |= 0x40;
break;
case EMI1_SGMII1:
brdcfg4 |= 0x60;
break;
case EMI1_SGMII2:
brdcfg4 |= 0x80;
break;
default:
brdcfg4 |= 0xa0;
break;
}
QIXIS_WRITE(brdcfg[4], brdcfg4);
}
static int ls1021a_mdio_read(struct mii_dev *bus, int addr, int devad,
int regnum)
{
struct ls1021a_mdio *priv = bus->priv;
ls1021a_mux_mdio(addr);
return priv->realbus->read(priv->realbus, addr, devad, regnum);
}
static int ls1021a_mdio_write(struct mii_dev *bus, int addr, int devad,
int regnum, u16 value)
{
struct ls1021a_mdio *priv = bus->priv;
ls1021a_mux_mdio(addr);
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
}
static int ls1021a_mdio_reset(struct mii_dev *bus)
{
struct ls1021a_mdio *priv = bus->priv;
return priv->realbus->reset(priv->realbus);
}
static int ls1021a_mdio_init(char *realbusname, char *fakebusname)
{
struct ls1021a_mdio *lsmdio;
struct mii_dev *bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate LS102xA MDIO bus\n");
return -1;
}
lsmdio = malloc(sizeof(*lsmdio));
if (!lsmdio) {
printf("Failed to allocate LS102xA private data\n");
free(bus);
return -1;
}
bus->read = ls1021a_mdio_read;
bus->write = ls1021a_mdio_write;
bus->reset = ls1021a_mdio_reset;
strcpy(bus->name, fakebusname);
lsmdio->realbus = miiphy_get_dev_by_name(realbusname);
if (!lsmdio->realbus) {
printf("No bus with name %s\n", realbusname);
free(bus);
free(lsmdio);
return -1;
}
bus->priv = lsmdio;
return mdio_register(bus);
}
int board_eth_init(bd_t *bis)
{
struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[3];
int num = 0;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
if (is_serdes_configured(SGMII_TSEC1)) {
puts("eTSEC1 is in sgmii mode\n");
tsec_info[num].flags |= TSEC_SGMII;
tsec_info[num].mii_devname = "LS1021A_SGMII_MDIO";
} else {
tsec_info[num].mii_devname = "LS1021A_RGMII_MDIO";
}
num++;
#endif
#ifdef CONFIG_TSEC2
SET_STD_TSEC_INFO(tsec_info[num], 2);
if (is_serdes_configured(SGMII_TSEC2)) {
puts("eTSEC2 is in sgmii mode\n");
tsec_info[num].flags |= TSEC_SGMII;
tsec_info[num].mii_devname = "LS1021A_SGMII_MDIO";
} else {
tsec_info[num].mii_devname = "LS1021A_RGMII_MDIO";
}
num++;
#endif
#ifdef CONFIG_TSEC3
SET_STD_TSEC_INFO(tsec_info[num], 3);
tsec_info[num].mii_devname = "LS1021A_RGMII_MDIO";
num++;
#endif
if (!num) {
printf("No TSECs initialized\n");
return 0;
}
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_init(tsec_info, num);
#endif
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
mdio_info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &mdio_info);
/* Register the virtual MDIO front-ends */
ls1021a_mdio_init(DEFAULT_MII_NAME, "LS1021A_RGMII_MDIO");
ls1021a_mdio_init(DEFAULT_MII_NAME, "LS1021A_SGMII_MDIO");
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
}