| /* |
| * Copyright 2009-2011 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <netdev.h> |
| #include <asm/mmu.h> |
| #include <asm/processor.h> |
| #include <asm/cache.h> |
| #include <asm/immap_85xx.h> |
| #include <asm/fsl_law.h> |
| #include <fsl_ddr_sdram.h> |
| #include <asm/fsl_serdes.h> |
| #include <asm/fsl_portals.h> |
| #include <asm/fsl_liodn.h> |
| #include <malloc.h> |
| #include <fm_eth.h> |
| #include <fsl_mdio.h> |
| #include <miiphy.h> |
| #include <phy.h> |
| |
| #include "../common/ngpixis.h" |
| #include "../common/fman.h" |
| #include <fsl_dtsec.h> |
| |
| #define EMI_NONE 0xffffffff |
| #define EMI_MASK 0xf0000000 |
| #define EMI1_RGMII 0x0 |
| #define EMI1_SLOT3 0x80000000 /* bank1 EFGH */ |
| #define EMI1_SLOT4 0x40000000 /* bank2 ABCD */ |
| #define EMI1_SLOT5 0xc0000000 /* bank3 ABCD */ |
| #define EMI2_SLOT4 0x10000000 /* bank2 ABCD */ |
| #define EMI2_SLOT5 0x30000000 /* bank3 ABCD */ |
| #define EMI1_MASK 0xc0000000 |
| #define EMI2_MASK 0x30000000 |
| |
| #define PHY_BASE_ADDR 0x00 |
| #define PHY_BASE_ADDR_SLOT5 0x10 |
| |
| static int mdio_mux[NUM_FM_PORTS]; |
| |
| static char *mdio_names[16] = { |
| "P4080DS_MDIO0", |
| "P4080DS_MDIO1", |
| NULL, |
| "P4080DS_MDIO3", |
| "P4080DS_MDIO4", |
| NULL, NULL, NULL, |
| "P4080DS_MDIO8", |
| NULL, NULL, NULL, |
| "P4080DS_MDIO12", |
| NULL, NULL, NULL, |
| }; |
| |
| /* |
| * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means |
| * that the mapping must be determined dynamically, or that the lane maps to |
| * something other than a board slot. |
| */ |
| static u8 lane_to_slot[] = { |
| 1, 1, 2, 2, 3, 3, 3, 3, 6, 6, 4, 4, 4, 4, 5, 5, 5, 5 |
| }; |
| |
| static char *p4080ds_mdio_name_for_muxval(u32 muxval) |
| { |
| return mdio_names[(muxval & EMI_MASK) >> 28]; |
| } |
| |
| struct mii_dev *mii_dev_for_muxval(u32 muxval) |
| { |
| struct mii_dev *bus; |
| char *name = p4080ds_mdio_name_for_muxval(muxval); |
| |
| if (!name) { |
| printf("No bus for muxval %x\n", muxval); |
| return NULL; |
| } |
| |
| bus = miiphy_get_dev_by_name(name); |
| |
| if (!bus) { |
| printf("No bus by name %s\n", name); |
| return NULL; |
| } |
| |
| return bus; |
| } |
| |
| #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES9) && defined(CONFIG_PHY_TERANETICS) |
| int board_phy_config(struct phy_device *phydev) |
| { |
| if (phydev->drv->config) |
| phydev->drv->config(phydev); |
| if (phydev->drv->uid == PHY_UID_TN2020) { |
| unsigned long timeout = 1 * 1000; /* 1 seconds */ |
| enum srds_prtcl device; |
| |
| /* |
| * Wait for the XAUI to come out of reset. This is when it |
| * starts transmitting alignment signals. |
| */ |
| while (--timeout) { |
| int reg = phy_read(phydev, MDIO_MMD_PHYXS, MDIO_CTRL1); |
| if (reg < 0) { |
| printf("TN2020: Error reading from PHY at " |
| "address %u\n", phydev->addr); |
| break; |
| } |
| /* |
| * Note that we've never actually seen |
| * MDIO_CTRL1_RESET set to 1. |
| */ |
| if ((reg & MDIO_CTRL1_RESET) == 0) |
| break; |
| udelay(1000); |
| } |
| |
| if (!timeout) { |
| printf("TN2020: Timeout waiting for PHY at address %u " |
| " to reset.\n", phydev->addr); |
| } |
| |
| switch (phydev->addr) { |
| case CONFIG_SYS_FM1_10GEC1_PHY_ADDR: |
| device = XAUI_FM1; |
| break; |
| case CONFIG_SYS_FM2_10GEC1_PHY_ADDR: |
| device = XAUI_FM2; |
| break; |
| default: |
| device = NONE; |
| } |
| |
| serdes_reset_rx(device); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| struct p4080ds_mdio { |
| u32 muxval; |
| struct mii_dev *realbus; |
| }; |
| |
| static void p4080ds_mux_mdio(u32 muxval) |
| { |
| ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); |
| uint gpioval = in_be32(&pgpio->gpdat) & ~(EMI_MASK); |
| gpioval |= muxval; |
| |
| out_be32(&pgpio->gpdat, gpioval); |
| } |
| |
| static int p4080ds_mdio_read(struct mii_dev *bus, int addr, int devad, |
| int regnum) |
| { |
| struct p4080ds_mdio *priv = bus->priv; |
| |
| p4080ds_mux_mdio(priv->muxval); |
| |
| return priv->realbus->read(priv->realbus, addr, devad, regnum); |
| } |
| |
| static int p4080ds_mdio_write(struct mii_dev *bus, int addr, int devad, |
| int regnum, u16 value) |
| { |
| struct p4080ds_mdio *priv = bus->priv; |
| |
| p4080ds_mux_mdio(priv->muxval); |
| |
| return priv->realbus->write(priv->realbus, addr, devad, regnum, value); |
| } |
| |
| static int p4080ds_mdio_reset(struct mii_dev *bus) |
| { |
| struct p4080ds_mdio *priv = bus->priv; |
| |
| return priv->realbus->reset(priv->realbus); |
| } |
| |
| static int p4080ds_mdio_init(char *realbusname, u32 muxval) |
| { |
| struct p4080ds_mdio *pmdio; |
| struct mii_dev *bus = mdio_alloc(); |
| |
| if (!bus) { |
| printf("Failed to allocate P4080DS MDIO bus\n"); |
| return -1; |
| } |
| |
| pmdio = malloc(sizeof(*pmdio)); |
| if (!pmdio) { |
| printf("Failed to allocate P4080DS private data\n"); |
| free(bus); |
| return -1; |
| } |
| |
| bus->read = p4080ds_mdio_read; |
| bus->write = p4080ds_mdio_write; |
| bus->reset = p4080ds_mdio_reset; |
| sprintf(bus->name, p4080ds_mdio_name_for_muxval(muxval)); |
| |
| pmdio->realbus = miiphy_get_dev_by_name(realbusname); |
| |
| if (!pmdio->realbus) { |
| printf("No bus with name %s\n", realbusname); |
| free(bus); |
| free(pmdio); |
| return -1; |
| } |
| |
| pmdio->muxval = muxval; |
| bus->priv = pmdio; |
| |
| return mdio_register(bus); |
| } |
| |
| void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, |
| enum fm_port port, int offset) |
| { |
| if (mdio_mux[port] == EMI1_RGMII) |
| fdt_set_phy_handle(blob, prop, pa, "phy_rgmii"); |
| |
| if (mdio_mux[port] == EMI1_SLOT3) { |
| int idx = port - FM2_DTSEC1 + 5; |
| char phy[16]; |
| |
| sprintf(phy, "phy%d_slot3", idx); |
| |
| fdt_set_phy_handle(blob, prop, pa, phy); |
| } |
| } |
| |
| void fdt_fixup_board_enet(void *fdt) |
| { |
| int i; |
| |
| /* |
| * P4080DS can be configured in many different ways, supporting a number |
| * of combinations of ethernet devices and phy types. In order to |
| * have just one device tree for all of those configurations, we fix up |
| * the tree here. By default, the device tree configures FM1 and FM2 |
| * for SGMII, and configures XAUI on both 10G interfaces. So we have |
| * a number of different variables to track: |
| * |
| * 1) Whether the device is configured at all. Whichever devices are |
| * not enabled should be disabled by setting the "status" property |
| * to "disabled". |
| * 2) What the PHY interface is. If this is an RGMII connection, |
| * we should change the "phy-connection-type" property to |
| * "rgmii" |
| * 3) Which PHY is being used. Because the MDIO buses are muxed, |
| * we need to redirect the "phy-handle" property to point at the |
| * PHY on the right slot/bus. |
| */ |
| |
| /* We've got six MDIO nodes that may or may not need to exist */ |
| fdt_status_disabled_by_alias(fdt, "emi1_slot3"); |
| fdt_status_disabled_by_alias(fdt, "emi1_slot4"); |
| fdt_status_disabled_by_alias(fdt, "emi1_slot5"); |
| fdt_status_disabled_by_alias(fdt, "emi2_slot4"); |
| fdt_status_disabled_by_alias(fdt, "emi2_slot5"); |
| |
| for (i = 0; i < NUM_FM_PORTS; i++) { |
| switch (mdio_mux[i]) { |
| case EMI1_SLOT3: |
| fdt_status_okay_by_alias(fdt, "emi1_slot3"); |
| break; |
| case EMI1_SLOT4: |
| fdt_status_okay_by_alias(fdt, "emi1_slot4"); |
| break; |
| case EMI1_SLOT5: |
| fdt_status_okay_by_alias(fdt, "emi1_slot5"); |
| break; |
| case EMI2_SLOT4: |
| fdt_status_okay_by_alias(fdt, "emi2_slot4"); |
| break; |
| case EMI2_SLOT5: |
| fdt_status_okay_by_alias(fdt, "emi2_slot5"); |
| break; |
| } |
| } |
| } |
| |
| int board_eth_init(bd_t *bis) |
| { |
| #ifdef CONFIG_FMAN_ENET |
| ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); |
| int i; |
| struct fsl_pq_mdio_info dtsec_mdio_info; |
| struct tgec_mdio_info tgec_mdio_info; |
| struct mii_dev *bus; |
| |
| /* Initialize the mdio_mux array so we can recognize empty elements */ |
| for (i = 0; i < NUM_FM_PORTS; i++) |
| mdio_mux[i] = EMI_NONE; |
| |
| /* The first 4 GPIOs are outputs to control MDIO bus muxing */ |
| out_be32(&pgpio->gpdir, EMI_MASK); |
| |
| dtsec_mdio_info.regs = |
| (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; |
| dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; |
| |
| /* Register the 1G MDIO bus */ |
| fsl_pq_mdio_init(bis, &dtsec_mdio_info); |
| |
| tgec_mdio_info.regs = |
| (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; |
| tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; |
| |
| /* Register the 10G MDIO bus */ |
| fm_tgec_mdio_init(bis, &tgec_mdio_info); |
| |
| /* Register the 6 muxing front-ends to the MDIO buses */ |
| p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII); |
| p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); |
| p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); |
| p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); |
| p4080ds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2_SLOT4); |
| p4080ds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2_SLOT5); |
| |
| fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); |
| fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR); |
| |
| #if (CONFIG_SYS_NUM_FMAN == 2) |
| fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR); |
| fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR); |
| fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC3_PHY_ADDR); |
| fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC4_PHY_ADDR); |
| fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR); |
| #endif |
| |
| for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { |
| int idx = i - FM1_DTSEC1, lane, slot; |
| switch (fm_info_get_enet_if(i)) { |
| case PHY_INTERFACE_MODE_SGMII: |
| lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); |
| if (lane < 0) |
| break; |
| slot = lane_to_slot[lane]; |
| switch (slot) { |
| case 3: |
| mdio_mux[i] = EMI1_SLOT3; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| case 4: |
| mdio_mux[i] = EMI1_SLOT4; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| case 5: |
| mdio_mux[i] = EMI1_SLOT5; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| }; |
| break; |
| case PHY_INTERFACE_MODE_RGMII: |
| fm_info_set_phy_address(i, 0); |
| mdio_mux[i] = EMI1_RGMII; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| default: |
| break; |
| } |
| } |
| bus = mii_dev_for_muxval(EMI1_SLOT5); |
| set_sgmii_phy(bus, FM1_DTSEC1, |
| CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR_SLOT5); |
| |
| for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { |
| int idx = i - FM1_10GEC1, lane, slot; |
| switch (fm_info_get_enet_if(i)) { |
| case PHY_INTERFACE_MODE_XGMII: |
| lane = serdes_get_first_lane(XAUI_FM1 + idx); |
| if (lane < 0) |
| break; |
| slot = lane_to_slot[lane]; |
| switch (slot) { |
| case 4: |
| mdio_mux[i] = EMI2_SLOT4; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| case 5: |
| mdio_mux[i] = EMI2_SLOT5; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| }; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| #if (CONFIG_SYS_NUM_FMAN == 2) |
| for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { |
| int idx = i - FM2_DTSEC1, lane, slot; |
| switch (fm_info_get_enet_if(i)) { |
| case PHY_INTERFACE_MODE_SGMII: |
| lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx); |
| if (lane < 0) |
| break; |
| slot = lane_to_slot[lane]; |
| switch (slot) { |
| case 3: |
| mdio_mux[i] = EMI1_SLOT3; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| case 4: |
| mdio_mux[i] = EMI1_SLOT4; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| case 5: |
| mdio_mux[i] = EMI1_SLOT5; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| }; |
| break; |
| case PHY_INTERFACE_MODE_RGMII: |
| fm_info_set_phy_address(i, 0); |
| mdio_mux[i] = EMI1_RGMII; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| bus = mii_dev_for_muxval(EMI1_SLOT3); |
| set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR); |
| bus = mii_dev_for_muxval(EMI1_SLOT4); |
| set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR); |
| |
| for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) { |
| int idx = i - FM2_10GEC1, lane, slot; |
| switch (fm_info_get_enet_if(i)) { |
| case PHY_INTERFACE_MODE_XGMII: |
| lane = serdes_get_first_lane(XAUI_FM2 + idx); |
| if (lane < 0) |
| break; |
| slot = lane_to_slot[lane]; |
| switch (slot) { |
| case 4: |
| mdio_mux[i] = EMI2_SLOT4; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| case 5: |
| mdio_mux[i] = EMI2_SLOT5; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| }; |
| break; |
| default: |
| break; |
| } |
| } |
| #endif |
| |
| cpu_eth_init(bis); |
| #endif /* CONFIG_FMAN_ENET */ |
| |
| return pci_eth_init(bis); |
| } |