drivers/video/imx/hdp/API_General.h - uboot-imx - Git at Google

 /******************************************************************************
  *
  * Copyright (C) 2016-2017 Cadence Design Systems, Inc.
  * All rights reserved worldwide.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * 1. Redistributions of source code must retain the above copyright notice,
  * this list of conditions and the following disclaimer.
  *
  * 2. Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * 3. Neither the name of the copyright holder nor the names of its contributors
  * may be used to endorse or promote products derived from this software without
  * specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THE SOFTWARE IS PROVIDED "AS IS",
  * WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
  * TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
  * FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
  * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
  * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  *
  * Copyright 2017-2018 NXP
  *
  ******************************************************************************
  *
  * API_General.h
  *
  ******************************************************************************
  */

 #ifndef API_GENERAL_H_
 #define API_GENERAL_H_

 #ifndef __UBOOT__
 #include <stdint.h>
 #else
 #include <common.h>
 #endif

 #define GENERAL_TEST_ECHO_MAX_PAYLOAD 100
 #define GENERAL_TEST_ECHO_MIN_PAYLOAD 1

 /**
  * \addtogroup GENERAL_API
  * \{
  */
 /** status code returned by API calls */
 typedef enum {
     /** operation succedded */
 	CDN_OK = 0,
     /** CEC operation succedded */
 	CDN_CEC_ERR_NONE = 0,
     /** mailbox is currently sending or receiving data */
 	CDN_BSY,
     /** message set up and ready to be sent, no data sent yet */
 	CDN_STARTED,
     /** error encountered while reading/writing APB */
 	CDN_ERR,
     /** reply returned with bad opcode */
 	CDN_BAD_OPCODE,
     /** reply returned with bad module */
 	CDN_BAD_MODULE,
     /** reply not supported mode */
 	CDN_ERROR_NOT_SUPPORTED,
     /** Invalid argument passed to CEC API function */
 	CDN_CEC_ERR_INVALID_ARG,
     /**
      * TX Buffer for CEC Messages is full. This is applicable only
      * when TX Buffers for CEC Messages are implemented in the HW.
      */
 	CDN_CEC_ERR_TX_BUFF_FULL,
     /** No Messages in the RX Buffers are present. */
 	CDN_CEC_ERR_RX_BUFF_EMPTY,
     /** Timeout during TX operation */
 	CDN_CEC_ERR_TX_TIMEOUT,
     /** Timeout during RX operation */
 	CDN_CEC_ERR_RX_TIMEOUT,
     /** Data transmision fail. */
 	CDN_CEC_ERR_TX_FAILED,
     /** Data reception fail. */
 	CDN_CEC_ERR_RX_FAILED,
     /** Operation aborted. */
 	CDN_CEC_ERR_ABORT,
     /** All Logical Addresses are in use. */
 	CDN_CEC_ERR_ALL_LA_IN_USE,
 } CDN_API_STATUS;

 typedef enum {
 	CDN_BUS_TYPE_APB = 0,
 	CDN_BUS_TYPE_SAPB = 1
 } CDN_BUS_TYPE;

 /**
  * GENERAL_Read_Register response struct
  */
 typedef struct {
 	unsigned int addr;
 	unsigned int val;
 } GENERAL_READ_REGISTER_RESPONSE;

 /**
  * \brief set up API, must be called before any other API call
  */
 void cdn_api_init(void);

 /**
  * \brief Loads firmware
  *
  * \param iMem - pointer to instruction memory
  * \param imemSize - size of instruction memory buffer
  * \param dMem - pointer to data memory
  * \param dmemSize - size of data memory buffer
  * \return 0 if success, 1 if apb error encountered, 2 if CPU
  *         isn't alive after loading firmware
  *
  * This function does not require initialisation by #CDN_API_Init
  */

 CDN_API_STATUS cdn_api_loadfirmware(unsigned char *imem,
 				    int imemsize,
 				    unsigned char *dmem, int dmemsize);
 /**
  * \brief debug echo command for APB
  * \param val - value to echo
  * \return status
  *
  * will return #CDN_ERROR if reply message doesn't match request
  */
 CDN_API_STATUS cdn_api_general_test_echo(unsigned int val,
 					 CDN_BUS_TYPE bus_type);

 /**
  * \brief blocking version of #CDN_API_General_Test_Echo
  */
 CDN_API_STATUS cdn_api_general_test_echo_blocking(unsigned int val,
 						  CDN_BUS_TYPE bus_type);

 /**
  * \brief Extended Echo test for mailbox.
  *
  * This test will send msg buffer to firmware's mailbox and
  * receive it back to the resp buffer. Received data will be
  * check against data sent and status will be returned as well
  * as received data.
  *
  * \param msg - Pointer to a buffer to send.
  * \param resp - Pointer to buffer for receiving msg payload back.
  * \param num_bytes - Number of bytes to send and receive.
  * \param bus_type Bus type.
  * \return status
  *
  * will return #CDN_ERROR if reply message doesn't match request or if
  *  arguments are invalid.
  */
 CDN_API_STATUS cdn_api_general_test_echo_ext(uint8_t const *msg, uint8_t *resp,
 					     uint16_t num_bytes,
 					     CDN_BUS_TYPE bus_type);

 /**
  * \brief blocking version of #CDN_API_General_Test_Echo_Ext
  */
 CDN_API_STATUS cdn_api_general_test_echo_ext_blocking(uint8_t const *msg,
 						      uint8_t *resp,
 						      uint16_t num_bytes,
 						      CDN_BUS_TYPE bus_type);

 /**
  * \brief get current version
  * \param [out] ver - fw version
  * \param [out] libver - lib version
  * \return status
  *
  * this fucntion does not require #CDN_API_Init
  */
 CDN_API_STATUS cdn_api_general_getcurversion(unsigned short *ver,
 					     unsigned short *verlib);

 /**
  * \brief read event value
  * \param [out] event - pointer to store 32-bit events value
  * \return status
  *
  * this function does not require #CDN_API_Init
  */
 CDN_API_STATUS cdn_api_get_event(uint32_t *events);

 /**
  * \brief read debug register value
  * \param [out] val - pointer to store 16-bit debug reg value
  * \return status
  *
  * this function does not require #CDN_API_Init
  */
 CDN_API_STATUS cdn_api_get_debug_reg_val(uint16_t *val);

 /**
  * \brief check if KEEP_ALIVE register changed
  * \return #CDN_BSY if KEEP_ALIVE not changed, #CDN_OK if changed and #CDN_ERR
  * if error occured while reading
  */
 CDN_API_STATUS cdn_api_checkalive(void);

 /**
  * \breif blocking version of #CDN_API_CheckAlive
  * blocks untill KEEP_ALIVE register changes or error occurs while reading
  */
 CDN_API_STATUS cdn_api_checkalive_blocking(void);

 /**
  * \brief set cpu to standby or active
  * \param [in] state - 1 for active, 0 for standby
  * \return status
  */
 CDN_API_STATUS cdn_api_maincontrol(unsigned char mode, unsigned char *resp);

 /**
  * \breif blocking version of #CDN_API_MainControl
  */
 CDN_API_STATUS cdn_api_maincontrol_blocking(unsigned char mode,
 					    unsigned char *resp);

 /**
  * \brief settings for APB
  *
  * Sends GENERAL_APB_CONF Command via regular Mailbox.
  * @param dpcd_bus_sel Set DPCD to use selected bus (0 for APB or 1 for SAPB)
  * @param dpcd_bus_lock Lock bus type. Aftern that bus type cannot be changed
  * by using this function.
  * @param hdcp_bus_sel Same meaning as for DPCD but for HDCP.
  * @param hdcp_bus_lock Same meaning as for DPCD but for HDCP.
  * @param capb_bus_sel Same meaning as for DPCD but for Cipher APB.
  * @param capb_bus_lock Same meaning as for DPCD but for Cipher APB.
  * @param dpcd_resp [out] Status of the operation.
  * If set to zero then DPCD bus type was successfuly changed.
  * If not then error occurred, most likely due to locked DPCD bus.
  * @param hdcp_resp [out] Same as for DPCD but for HDCP.
  * @param capb_resp [out] Same as for DPCD but for Cipher APB.
  *
  * \return status
  */
 CDN_API_STATUS cdn_api_apbconf(uint8_t dpcd_bus_sel, uint8_t dpcd_bus_lock,
 			       uint8_t hdcp_bus_sel, uint8_t hdcp_bus_lock,
 			       uint8_t capb_bus_sel, uint8_t capb_bus_lock,
 			       uint8_t *dpcd_resp, uint8_t *hdcp_resp,
 			       uint8_t *capb_resp);

 /**
  * blocking version of #CDN_API_MainControl
  */
 CDN_API_STATUS cdn_api_apbconf_blocking(uint8_t dpcd_bus_sel,
 					uint8_t dpcd_bus_lock,
 					uint8_t hdcp_bus_sel,
 					uint8_t hdcp_bus_lock,
 					uint8_t capb_bus_sel,
 					uint8_t capb_bus_lock,
 					uint8_t *dpcd_resp,
 					uint8_t *hdcp_resp,
 					uint8_t *capb_resp);

 /**
  * \brief set the  xtensa clk, write this api before turn on the cpu
  */
 CDN_API_STATUS cdn_api_setclock(unsigned char mhz);

 CDN_API_STATUS cdn_api_general_read_register(unsigned int addr,
 					     GENERAL_READ_REGISTER_RESPONSE
 					     *resp);
 CDN_API_STATUS
 cdn_api_general_read_register_blocking(unsigned int addr,
 				       GENERAL_READ_REGISTER_RESPONSE *resp);
 CDN_API_STATUS cdn_api_general_write_register(unsigned int addr,
 					      unsigned int val);
 CDN_API_STATUS cdn_api_general_write_register_blocking(unsigned int addr,
 						       unsigned int val);
 CDN_API_STATUS cdn_api_general_write_field(unsigned int addr,
 					   unsigned char startbit,
 					   unsigned char bitsno,
 					   unsigned int val);
 CDN_API_STATUS cdn_api_general_write_field_blocking(unsigned int addr,
 						    unsigned char startbit,
 						    unsigned char bitsno,
 						    unsigned int val);
 CDN_API_STATUS cdn_api_general_phy_test_access(uint8_t *resp);
 CDN_API_STATUS cdn_api_general_phy_test_access_blocking(uint8_t *resp);
 CDN_API_STATUS hdp_rx_loadfirmware(unsigned char *imem,
 				    int imemsize,
 				    unsigned char *dmem, int dmemsize);

 #endif
	/******************************************************************************
	*
	* Copyright (C) 2016-2017 Cadence Design Systems, Inc.
	* All rights reserved worldwide.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* 1. Redistributions of source code must retain the above copyright notice,
	* this list of conditions and the following disclaimer.
	*
	* 2. Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* 3. Neither the name of the copyright holder nor the names of its contributors
	* may be used to endorse or promote products derived from this software without
	* specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
	* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
	* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
	* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
	* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
	* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
	* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
	* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
	* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
	* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THE SOFTWARE IS PROVIDED "AS IS",
	* WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
	* TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
	* FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
	* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
	* OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
	*
	* Copyright 2017-2018 NXP
	*
	******************************************************************************
	*
	* API_General.h
	*
	******************************************************************************
	*/

	#ifndef API_GENERAL_H_
	#define API_GENERAL_H_

	#ifndef __UBOOT__
	#include <stdint.h>
	#else
	#include <common.h>
	#endif

	#define GENERAL_TEST_ECHO_MAX_PAYLOAD 100
	#define GENERAL_TEST_ECHO_MIN_PAYLOAD 1

	/**
	* \addtogroup GENERAL_API
	* \{
	*/
	/** status code returned by API calls */
	typedef enum {
	/** operation succedded */
	CDN_OK = 0,
	/** CEC operation succedded */
	CDN_CEC_ERR_NONE = 0,
	/** mailbox is currently sending or receiving data */
	CDN_BSY,
	/** message set up and ready to be sent, no data sent yet */
	CDN_STARTED,
	/** error encountered while reading/writing APB */
	CDN_ERR,
	/** reply returned with bad opcode */
	CDN_BAD_OPCODE,
	/** reply returned with bad module */
	CDN_BAD_MODULE,
	/** reply not supported mode */
	CDN_ERROR_NOT_SUPPORTED,
	/** Invalid argument passed to CEC API function */
	CDN_CEC_ERR_INVALID_ARG,
	/**
	* TX Buffer for CEC Messages is full. This is applicable only
	* when TX Buffers for CEC Messages are implemented in the HW.
	*/
	CDN_CEC_ERR_TX_BUFF_FULL,
	/** No Messages in the RX Buffers are present. */
	CDN_CEC_ERR_RX_BUFF_EMPTY,
	/** Timeout during TX operation */
	CDN_CEC_ERR_TX_TIMEOUT,
	/** Timeout during RX operation */
	CDN_CEC_ERR_RX_TIMEOUT,
	/** Data transmision fail. */
	CDN_CEC_ERR_TX_FAILED,
	/** Data reception fail. */
	CDN_CEC_ERR_RX_FAILED,
	/** Operation aborted. */
	CDN_CEC_ERR_ABORT,
	/** All Logical Addresses are in use. */
	CDN_CEC_ERR_ALL_LA_IN_USE,
	} CDN_API_STATUS;

	typedef enum {
	CDN_BUS_TYPE_APB = 0,
	CDN_BUS_TYPE_SAPB = 1
	} CDN_BUS_TYPE;

	/**
	* GENERAL_Read_Register response struct
	*/
	typedef struct {
	unsigned int addr;
	unsigned int val;
	} GENERAL_READ_REGISTER_RESPONSE;

	/**
	* \brief set up API, must be called before any other API call
	*/
	void cdn_api_init(void);

	/**
	* \brief Loads firmware
	*
	* \param iMem - pointer to instruction memory
	* \param imemSize - size of instruction memory buffer
	* \param dMem - pointer to data memory
	* \param dmemSize - size of data memory buffer
	* \return 0 if success, 1 if apb error encountered, 2 if CPU
	* isn't alive after loading firmware
	*
	* This function does not require initialisation by #CDN_API_Init
	*/

	CDN_API_STATUS cdn_api_loadfirmware(unsigned char *imem,
	int imemsize,
	unsigned char *dmem, int dmemsize);
	/**
	* \brief debug echo command for APB
	* \param val - value to echo
	* \return status
	*
	* will return #CDN_ERROR if reply message doesn't match request
	*/
	CDN_API_STATUS cdn_api_general_test_echo(unsigned int val,
	CDN_BUS_TYPE bus_type);

	/**
	* \brief blocking version of #CDN_API_General_Test_Echo
	*/
	CDN_API_STATUS cdn_api_general_test_echo_blocking(unsigned int val,
	CDN_BUS_TYPE bus_type);

	/**
	* \brief Extended Echo test for mailbox.
	*
	* This test will send msg buffer to firmware's mailbox and
	* receive it back to the resp buffer. Received data will be
	* check against data sent and status will be returned as well
	* as received data.
	*
	* \param msg - Pointer to a buffer to send.
	* \param resp - Pointer to buffer for receiving msg payload back.
	* \param num_bytes - Number of bytes to send and receive.
	* \param bus_type Bus type.
	* \return status
	*
	* will return #CDN_ERROR if reply message doesn't match request or if
	* arguments are invalid.
	*/
	CDN_API_STATUS cdn_api_general_test_echo_ext(uint8_t const msg, uint8_t resp,
	uint16_t num_bytes,
	CDN_BUS_TYPE bus_type);

	/**
	* \brief blocking version of #CDN_API_General_Test_Echo_Ext
	*/
	CDN_API_STATUS cdn_api_general_test_echo_ext_blocking(uint8_t const *msg,
	uint8_t *resp,
	uint16_t num_bytes,
	CDN_BUS_TYPE bus_type);

	/**
	* \brief get current version
	* \param [out] ver - fw version
	* \param [out] libver - lib version
	* \return status
	*
	* this fucntion does not require #CDN_API_Init
	*/
	CDN_API_STATUS cdn_api_general_getcurversion(unsigned short *ver,
	unsigned short *verlib);

	/**
	* \brief read event value
	* \param [out] event - pointer to store 32-bit events value
	* \return status
	*
	* this function does not require #CDN_API_Init
	*/
	CDN_API_STATUS cdn_api_get_event(uint32_t *events);

	/**
	* \brief read debug register value
	* \param [out] val - pointer to store 16-bit debug reg value
	* \return status
	*
	* this function does not require #CDN_API_Init
	*/
	CDN_API_STATUS cdn_api_get_debug_reg_val(uint16_t *val);

	/**
	* \brief check if KEEP_ALIVE register changed
	* \return #CDN_BSY if KEEP_ALIVE not changed, #CDN_OK if changed and #CDN_ERR
	* if error occured while reading
	*/
	CDN_API_STATUS cdn_api_checkalive(void);

	/**
	* \breif blocking version of #CDN_API_CheckAlive
	* blocks untill KEEP_ALIVE register changes or error occurs while reading
	*/
	CDN_API_STATUS cdn_api_checkalive_blocking(void);

	/**
	* \brief set cpu to standby or active
	* \param [in] state - 1 for active, 0 for standby
	* \return status
	*/
	CDN_API_STATUS cdn_api_maincontrol(unsigned char mode, unsigned char *resp);

	/**
	* \breif blocking version of #CDN_API_MainControl
	*/
	CDN_API_STATUS cdn_api_maincontrol_blocking(unsigned char mode,
	unsigned char *resp);

	/**
	* \brief settings for APB
	*
	* Sends GENERAL_APB_CONF Command via regular Mailbox.
	* @param dpcd_bus_sel Set DPCD to use selected bus (0 for APB or 1 for SAPB)
	* @param dpcd_bus_lock Lock bus type. Aftern that bus type cannot be changed
	* by using this function.
	* @param hdcp_bus_sel Same meaning as for DPCD but for HDCP.
	* @param hdcp_bus_lock Same meaning as for DPCD but for HDCP.
	* @param capb_bus_sel Same meaning as for DPCD but for Cipher APB.
	* @param capb_bus_lock Same meaning as for DPCD but for Cipher APB.
	* @param dpcd_resp [out] Status of the operation.
	* If set to zero then DPCD bus type was successfuly changed.
	* If not then error occurred, most likely due to locked DPCD bus.
	* @param hdcp_resp [out] Same as for DPCD but for HDCP.
	* @param capb_resp [out] Same as for DPCD but for Cipher APB.
	*
	* \return status
	*/
	CDN_API_STATUS cdn_api_apbconf(uint8_t dpcd_bus_sel, uint8_t dpcd_bus_lock,
	uint8_t hdcp_bus_sel, uint8_t hdcp_bus_lock,
	uint8_t capb_bus_sel, uint8_t capb_bus_lock,
	uint8_t dpcd_resp, uint8_t hdcp_resp,
	uint8_t *capb_resp);

	/**
	* blocking version of #CDN_API_MainControl
	*/
	CDN_API_STATUS cdn_api_apbconf_blocking(uint8_t dpcd_bus_sel,
	uint8_t dpcd_bus_lock,
	uint8_t hdcp_bus_sel,
	uint8_t hdcp_bus_lock,
	uint8_t capb_bus_sel,
	uint8_t capb_bus_lock,
	uint8_t *dpcd_resp,
	uint8_t *hdcp_resp,
	uint8_t *capb_resp);

	/**
	* \brief set the xtensa clk, write this api before turn on the cpu
	*/
	CDN_API_STATUS cdn_api_setclock(unsigned char mhz);

	CDN_API_STATUS cdn_api_general_read_register(unsigned int addr,
	GENERAL_READ_REGISTER_RESPONSE
	*resp);
	CDN_API_STATUS
	cdn_api_general_read_register_blocking(unsigned int addr,
	GENERAL_READ_REGISTER_RESPONSE *resp);
	CDN_API_STATUS cdn_api_general_write_register(unsigned int addr,
	unsigned int val);
	CDN_API_STATUS cdn_api_general_write_register_blocking(unsigned int addr,
	unsigned int val);
	CDN_API_STATUS cdn_api_general_write_field(unsigned int addr,
	unsigned char startbit,
	unsigned char bitsno,
	unsigned int val);
	CDN_API_STATUS cdn_api_general_write_field_blocking(unsigned int addr,
	unsigned char startbit,
	unsigned char bitsno,
	unsigned int val);
	CDN_API_STATUS cdn_api_general_phy_test_access(uint8_t *resp);
	CDN_API_STATUS cdn_api_general_phy_test_access_blocking(uint8_t *resp);
	CDN_API_STATUS hdp_rx_loadfirmware(unsigned char *imem,
	int imemsize,
	unsigned char *dmem, int dmemsize);

	#endif