mpc85xx: Add support for the MPC8536
The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
also have SERDES init code for the 8536.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Dejan Minic <minic@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index 80b80ff..627e61b 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -49,6 +49,7 @@
COBJS-$(CONFIG_MPC8572) += ddr-gen3.o
COBJS-$(CONFIG_MPC8536) += ddr-gen3.o
+COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o tlb.o \
pci.o serial_scc.o commproc.o ether_fcc.o qe_io.o \
$(COBJS-y)
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 5c2231d..2fe3cea 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -36,6 +36,8 @@
struct cpu_type cpu_type_list [] = {
CPU_TYPE_ENTRY(8533, 8533),
CPU_TYPE_ENTRY(8533, 8533_E),
+ CPU_TYPE_ENTRY(8536, 8536),
+ CPU_TYPE_ENTRY(8536, 8536_E),
CPU_TYPE_ENTRY(8540, 8540),
CPU_TYPE_ENTRY(8541, 8541),
CPU_TYPE_ENTRY(8541, 8541_E),
@@ -89,6 +91,9 @@
svr = get_svr();
ver = SVR_SOC_VER(svr);
major = SVR_MAJ(svr);
+#ifdef CONFIG_MPC8536
+ major &= 0x7; /* the msb of this nibble is a mfg code */
+#endif
minor = SVR_MIN(svr);
puts("CPU: ");
@@ -154,7 +159,8 @@
#endif
clkdiv = lcrr & 0x0f;
if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || defined(CONFIG_MPC8572)
+#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \
+ defined(CONFIG_MPC8572) || defined(CONFIG_MPC8536)
/*
* Yes, the entire PQ38 family use the same
* bit-representation for twice the clock divider values.
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index 4feb751..783c5ba 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -37,6 +37,10 @@
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_MPC8536
+extern void fsl_serdes_init(void);
+#endif
+
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
@@ -240,6 +244,9 @@
/* Config QE ioports */
config_qe_ioports();
#endif
+#if defined(CONFIG_MPC8536)
+ fsl_serdes_init();
+#endif
}
diff --git a/cpu/mpc85xx/mpc8536_serdes.c b/cpu/mpc85xx/mpc8536_serdes.c
new file mode 100644
index 0000000..ae091e6
--- /dev/null
+++ b/cpu/mpc85xx/mpc8536_serdes.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2008 Freescale Semicondutor, Inc. All rights reserved.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+
+/* PORDEVSR register */
+#define GUTS_PORDEVSR_OFFS 0xc
+#define GUTS_PORDEVSR_SERDES2_IO_SEL 0x38000000
+#define GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT 27
+
+/* SerDes CR0 register */
+#define FSL_SRDSCR0_OFFS 0x0
+#define FSL_SRDSCR0_TXEQA_MASK 0x00007000
+#define FSL_SRDSCR0_TXEQA_SGMII 0x00004000
+#define FSL_SRDSCR0_TXEQA_SATA 0x00001000
+#define FSL_SRDSCR0_TXEQE_MASK 0x00000700
+#define FSL_SRDSCR0_TXEQE_SGMII 0x00000400
+#define FSL_SRDSCR0_TXEQE_SATA 0x00000100
+
+/* SerDes CR1 register */
+#define FSL_SRDSCR1_OFFS 0x4
+#define FSL_SRDSCR1_LANEA_MASK 0x80200000
+#define FSL_SRDSCR1_LANEA_OFF 0x80200000
+#define FSL_SRDSCR1_LANEE_MASK 0x08020000
+#define FSL_SRDSCR1_LANEE_OFF 0x08020000
+
+/* SerDes CR2 register */
+#define FSL_SRDSCR2_OFFS 0x8
+#define FSL_SRDSCR2_EICA_MASK 0x00001f00
+#define FSL_SRDSCR2_EICA_SGMII 0x00000400
+#define FSL_SRDSCR2_EICA_SATA 0x00001400
+#define FSL_SRDSCR2_EICE_MASK 0x0000001f
+#define FSL_SRDSCR2_EICE_SGMII 0x00000004
+#define FSL_SRDSCR2_EICE_SATA 0x00000014
+
+/* SerDes CR3 register */
+#define FSL_SRDSCR3_OFFS 0xc
+#define FSL_SRDSCR3_LANEA_MASK 0x3f000700
+#define FSL_SRDSCR3_LANEA_SGMII 0x00000000
+#define FSL_SRDSCR3_LANEA_SATA 0x15000500
+#define FSL_SRDSCR3_LANEE_MASK 0x003f0007
+#define FSL_SRDSCR3_LANEE_SGMII 0x00000000
+#define FSL_SRDSCR3_LANEE_SATA 0x00150005
+
+void fsl_serdes_init(void)
+{
+ void *guts = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ void *sd = (void *)CFG_MPC85xx_SERDES2_ADDR;
+ u32 pordevsr = in_be32(guts + GUTS_PORDEVSR_OFFS);
+ u32 srds2_io_sel;
+ u32 tmp;
+
+ /* parse the SRDS2_IO_SEL of PORDEVSR */
+ srds2_io_sel = (pordevsr & GUTS_PORDEVSR_SERDES2_IO_SEL)
+ >> GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT;
+
+ switch (srds2_io_sel) {
+ case 1: /* Lane A - SATA1, Lane E - SATA2 */
+ /* CR 0 */
+ tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
+ tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
+ tmp |= FSL_SRDSCR0_TXEQA_SATA;
+ tmp &= ~FSL_SRDSCR0_TXEQE_MASK;
+ tmp |= FSL_SRDSCR0_TXEQE_SATA;
+ out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
+ /* CR 1 */
+ tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_LANEA_MASK;
+ tmp &= ~FSL_SRDSCR1_LANEE_MASK;
+ out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
+ /* CR 2 */
+ tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_EICA_MASK;
+ tmp |= FSL_SRDSCR2_EICA_SATA;
+ tmp &= ~FSL_SRDSCR2_EICE_MASK;
+ tmp |= FSL_SRDSCR2_EICE_SATA;
+ out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
+ /* CR 3 */
+ tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
+ tmp &= ~FSL_SRDSCR3_LANEA_MASK;
+ tmp |= FSL_SRDSCR3_LANEA_SATA;
+ tmp &= ~FSL_SRDSCR3_LANEE_MASK;
+ tmp |= FSL_SRDSCR3_LANEE_SATA;
+ out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
+ break;
+ case 3: /* Lane A - SATA1, Lane E - disabled */
+ /* CR 0 */
+ tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
+ tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
+ tmp |= FSL_SRDSCR0_TXEQA_SATA;
+ out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
+ /* CR 1 */
+ tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_LANEE_MASK;
+ tmp |= FSL_SRDSCR1_LANEE_OFF;
+ out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
+ /* CR 2 */
+ tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_EICA_MASK;
+ tmp |= FSL_SRDSCR2_EICA_SATA;
+ out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
+ /* CR 3 */
+ tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
+ tmp &= ~FSL_SRDSCR3_LANEA_MASK;
+ tmp |= FSL_SRDSCR3_LANEA_SATA;
+ out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
+ break;
+ case 4: /* Lane A - eTSEC1 SGMII, Lane E - eTSEC3 SGMII */
+ /* CR 0 */
+ tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
+ tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
+ tmp |= FSL_SRDSCR0_TXEQA_SGMII;
+ tmp &= ~FSL_SRDSCR0_TXEQE_MASK;
+ tmp |= FSL_SRDSCR0_TXEQE_SGMII;
+ out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
+ /* CR 1 */
+ tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_LANEA_MASK;
+ tmp &= ~FSL_SRDSCR1_LANEE_MASK;
+ out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
+ /* CR 2 */
+ tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_EICA_MASK;
+ tmp |= FSL_SRDSCR2_EICA_SGMII;
+ tmp &= ~FSL_SRDSCR2_EICE_MASK;
+ tmp |= FSL_SRDSCR2_EICE_SGMII;
+ out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
+ /* CR 3 */
+ tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
+ tmp &= ~FSL_SRDSCR3_LANEA_MASK;
+ tmp |= FSL_SRDSCR3_LANEA_SGMII;
+ tmp &= ~FSL_SRDSCR3_LANEE_MASK;
+ tmp |= FSL_SRDSCR3_LANEE_SGMII;
+ out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
+ break;
+ case 6: /* Lane A - eTSEC1 SGMII, Lane E - disabled */
+ /* CR 0 */
+ tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
+ tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
+ tmp |= FSL_SRDSCR0_TXEQA_SGMII;
+ out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
+ /* CR 1 */
+ tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_LANEE_MASK;
+ tmp |= FSL_SRDSCR1_LANEE_OFF;
+ out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
+ /* CR 2 */
+ tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_EICA_MASK;
+ tmp |= FSL_SRDSCR2_EICA_SGMII;
+ out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
+ /* CR 3 */
+ tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
+ tmp &= ~FSL_SRDSCR3_LANEA_MASK;
+ tmp |= FSL_SRDSCR3_LANEA_SGMII;
+ out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
+ break;
+ case 7: /* Lane A - disabled, Lane E - disabled */
+ /* CR 1 */
+ tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_LANEA_MASK;
+ tmp |= FSL_SRDSCR1_LANEA_OFF;
+ tmp &= ~FSL_SRDSCR1_LANEE_MASK;
+ tmp |= FSL_SRDSCR1_LANEE_OFF;
+ out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
+ break;
+ default:
+ break;
+ }
+}
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 699441b4..1cda1e3 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -110,6 +110,10 @@
#endif
gd->i2c2_clk = gd->i2c1_clk;
+#if defined(CONFIG_MPC8536)
+ gd->sdhc_clk = gd->bus_clk / 2;
+#endif
+
#if defined(CONFIG_CPM2)
gd->vco_out = 2*sys_info.freqSystemBus;
gd->cpm_clk = gd->vco_out / 2;
