diff --git a/CHANGELOG b/CHANGELOG
index db9899a..a1b5250 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* GCC-4.x fixes: clean up global data pointer initialization for all
+  boards
+
 * Update for Delta board:
   - redundant NAND environment
   - misc Monahans cleanups (remove dead code etc.)
diff --git a/README b/README
index 59f4cd2..ae9e10f 100644
--- a/README
+++ b/README
@@ -3309,6 +3309,8 @@
 
     ==> U-Boot will use R8 to hold a pointer to the global data
 
+NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope,
+or current versions of GCC may "optimize" the code too much.
 
 Memory Management:
 ------------------
diff --git a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
index 0934e1b..40f41c7 100644
--- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
+++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
@@ -1,6 +1,7 @@
 /*
  * (C) Copyright 2002
  * Hyperion Entertainment, ThomasF@hyperion-entertainment.com
+ * (C) Copyright 2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -88,8 +89,6 @@
 
 void after_reloc (ulong dest_addr, gd_t *gd)
 {
-/* HJF:	DECLARE_GLOBAL_DATA_PTR; */
-
 	board_init_r (gd, dest_addr);
 }
 
diff --git a/board/MAI/AmigaOneG3SE/articiaS.c b/board/MAI/AmigaOneG3SE/articiaS.c
index a4dad64..3901b80 100644
--- a/board/MAI/AmigaOneG3SE/articiaS.c
+++ b/board/MAI/AmigaOneG3SE/articiaS.c
@@ -29,6 +29,8 @@
 #include "smbus.h"
 #include "via686.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef DEBUG
 
 struct dimm_bank {
@@ -82,7 +84,6 @@
 
 long detect_sdram (uint8 * rom, int dimmNum, struct dimm_bank *banks)
 {
-    DECLARE_GLOBAL_DATA_PTR;
 	int dimm_address = (dimmNum == 0) ? SM_DIMM0_ADDR : SM_DIMM1_ADDR;
 	uint32 busclock = gd->bus_clk;
 	uint32 memclock = busclock;
@@ -394,8 +395,6 @@
 
 long articiaS_ram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	register uint32 i;
 	register uint32 value1;
 	register uint32 value2;
diff --git a/board/MAI/AmigaOneG3SE/articiaS_pci.c b/board/MAI/AmigaOneG3SE/articiaS_pci.c
index d2e9f29..480dae5 100644
--- a/board/MAI/AmigaOneG3SE/articiaS_pci.c
+++ b/board/MAI/AmigaOneG3SE/articiaS_pci.c
@@ -26,6 +26,8 @@
 #include "memio.h"
 #include "articiaS.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef ARTICIA_PCI_DEBUG
 
 #ifdef  ARTICIA_PCI_DEBUG
@@ -493,8 +495,6 @@
 
 int articiaS_init_vga (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
     extern void shutdown_bios(void);
     pci_dev_t dev = ~0;
     int busnr = 0;
diff --git a/board/MAI/AmigaOneG3SE/cmd_boota.c b/board/MAI/AmigaOneG3SE/cmd_boota.c
index 3e2835a..143bba2 100644
--- a/board/MAI/AmigaOneG3SE/cmd_boota.c
+++ b/board/MAI/AmigaOneG3SE/cmd_boota.c
@@ -3,6 +3,7 @@
 #include "../disk/part_amiga.h"
 #include <asm/cache.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 #undef BOOTA_DEBUG
 
@@ -108,8 +109,6 @@
 
 	s = getenv ("autostart");
 	if (s && strcmp (s, "yes") == 0) {
-		DECLARE_GLOBAL_DATA_PTR;
-
 		void (*boot) (bd_t *, char *, block_dev_desc_t *);
 		char *args;
 
diff --git a/board/MAI/AmigaOneG3SE/serial.c b/board/MAI/AmigaOneG3SE/serial.c
index e83fb46..b6f57c7 100644
--- a/board/MAI/AmigaOneG3SE/serial.c
+++ b/board/MAI/AmigaOneG3SE/serial.c
@@ -4,6 +4,8 @@
 #include "memio.h"
 #include "articiaS.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifndef CFG_NS16550
 static uint32 ComPort1;
 
@@ -150,8 +152,6 @@
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint32 clock_divisor = 115200 / gd->baudrate;
 
 	NS16550_init (Com0, clock_divisor);
@@ -239,8 +239,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint32 clock_divisor = 115200 / gd->baudrate;
 
 	NS16550_init (Com0, clock_divisor);
diff --git a/board/MAI/AmigaOneG3SE/via686.c b/board/MAI/AmigaOneG3SE/via686.c
index c797e47..3606db8 100644
--- a/board/MAI/AmigaOneG3SE/via686.c
+++ b/board/MAI/AmigaOneG3SE/via686.c
@@ -28,6 +28,8 @@
 #include "via686.h"
 #include "i8259.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef VIA_DEBUG
 
 #ifdef  VIA_DEBUG
@@ -226,33 +228,31 @@
 
 extern unsigned long via_calibrate_time_base(void);
 
-void via_calibrate_bus_freq(void)
+void via_calibrate_bus_freq (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
+	unsigned long tb;
 
-    unsigned long tb;
+	/* This is 20 microseconds */
+#define CALIBRATE_TIME 28636
 
-    /* This is 20 microseconds */
-    #define CALIBRATE_TIME 28636
+	/* Enable the timer (and disable speaker) */
+	unsigned char c;
 
+	c = in_byte (0x61);
+	out_byte (0x61, ((c & ~0x02) | 0x01));
 
-    /* Enable the timer (and disable speaker) */
-    unsigned char c;
-    c = in_byte(0x61);
-    out_byte(0x61, ((c & ~0x02) | 0x01));
+	/* Set timer 2 to low/high writing */
+	out_byte (0x43, 0xb0);
+	out_byte (0x42, CALIBRATE_TIME & 0xff);
+	out_byte (0x42, CALIBRATE_TIME >> 8);
 
-    /* Set timer 2 to low/high writing */
-    out_byte(0x43, 0xb0);
-    out_byte(0x42, CALIBRATE_TIME & 0xff);
-    out_byte(0x42, CALIBRATE_TIME >>8);
+	/* Read the time base */
+	tb = via_calibrate_time_base ();
 
-    /* Read the time base */
-    tb = via_calibrate_time_base();
-
-    if (tb >= 700000)
-	gd->bus_clk = 133333333;
-    else
-	gd->bus_clk = 100000000;
+	if (tb >= 700000)
+		gd->bus_clk = 133333333;
+	else
+		gd->bus_clk = 100000000;
 
 }
 
diff --git a/board/MAI/AmigaOneG3SE/video.c b/board/MAI/AmigaOneG3SE/video.c
index 36e3c62..f6327f7 100644
--- a/board/MAI/AmigaOneG3SE/video.c
+++ b/board/MAI/AmigaOneG3SE/video.c
@@ -26,6 +26,8 @@
 #include "memio.h"
 #include <part.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 unsigned char *cursor_position;
 unsigned int cursor_row;
 unsigned int cursor_col;
@@ -480,7 +482,6 @@
 void video_banner(void)
 {
     block_dev_desc_t *ide;
-    DECLARE_GLOBAL_DATA_PTR;
     int i;
     char *s;
     int maxdev;
diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c
index 9d0d213..6a1d4d7 100644
--- a/board/Marvell/common/serial.c
+++ b/board/Marvell/common/serial.c
@@ -45,13 +45,13 @@
 
 #include "ns16550.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_MPSC
 
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
 	int clock_divisor = 230400 / gd->baudrate;
 #endif
@@ -88,8 +88,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
 }
 
@@ -97,8 +95,6 @@
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int clock_divisor = 230400 / gd->baudrate;
 
 #ifdef CFG_INIT_CHAN1
@@ -130,8 +126,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int clock_divisor = 230400 / gd->baudrate;
 
 #ifdef CFG_INIT_CHAN1
diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c
index ccb3adc..d8acd31 100644
--- a/board/Marvell/db64360/mpsc.c
+++ b/board/Marvell/db64360/mpsc.c
@@ -42,6 +42,8 @@
 
 #include "../include/memory.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* Define this if you wish to use the MPSC as a register based UART.
  * This will force the serial port to not use the SDMA engine at all.
  */
@@ -114,9 +116,7 @@
 
 	/* Clear the CFR  (CHR4) */
 	/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&".  Assuming "= &"
-
-REG_GAP));
+	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
 	temp &= 0xffffff00;
 	temp |= BIT29;
 	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
@@ -158,7 +158,6 @@
  * global variables [josh] */
 int mpsc_putchar_early (char ch)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int mpsc = CHANNEL;
 	int temp =
 		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
@@ -511,7 +510,6 @@
 
 int galbrg_set_baudrate (int channel, int rate)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int clock;
 
 	galbrg_disable (channel);	/*ok */
diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c
index 3c5dee7..e5a87ad 100644
--- a/board/Marvell/db64360/mv_eth.c
+++ b/board/Marvell/db64360/mv_eth.c
@@ -732,6 +732,7 @@
 	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
 	pkt_info.byte_cnt = dataSize;
 	pkt_info.buf_ptr = (unsigned int) dataPtr;
+	pkt_info.return_info = 0;
 
 	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
 	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c
index d2635f8..f04aaf9 100644
--- a/board/Marvell/db64360/sdram_init.c
+++ b/board/Marvell/db64360/sdram_init.c
@@ -42,6 +42,8 @@
 #include "64360.h"
 #include "mv_regs.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef	DEBUG
 #define MAP_PCI
 
@@ -246,8 +248,6 @@
 /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
 static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long spd_checksum;
 
 #ifdef ZUMA_NTL
diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c
index 33fbc49..b783aff 100644
--- a/board/Marvell/db64460/mpsc.c
+++ b/board/Marvell/db64460/mpsc.c
@@ -42,6 +42,8 @@
 
 #include "../include/memory.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* Define this if you wish to use the MPSC as a register based UART.
  * This will force the serial port to not use the SDMA engine at all.
  */
@@ -114,9 +116,7 @@
 
 	/* Clear the CFR  (CHR4) */
 	/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&".  Assuming "= &"
-
-REG_GAP));
+	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
 	temp &= 0xffffff00;
 	temp |= BIT29;
 	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
@@ -158,7 +158,6 @@
  * global variables [josh] */
 int mpsc_putchar_early (char ch)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int mpsc = CHANNEL;
 	int temp =
 		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
@@ -511,7 +510,6 @@
 
 int galbrg_set_baudrate (int channel, int rate)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int clock;
 
 	galbrg_disable (channel);	/*ok */
diff --git a/board/Marvell/db64460/mv_eth.c b/board/Marvell/db64460/mv_eth.c
index ec5d581..b2c7835 100644
--- a/board/Marvell/db64460/mv_eth.c
+++ b/board/Marvell/db64460/mv_eth.c
@@ -731,6 +731,7 @@
 	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
 	pkt_info.byte_cnt = dataSize;
 	pkt_info.buf_ptr = (unsigned int) dataPtr;
+	pkt_info.return_info = 0;
 
 	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
 	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c
index 8cfe84c..1762202 100644
--- a/board/Marvell/db64460/sdram_init.c
+++ b/board/Marvell/db64460/sdram_init.c
@@ -42,6 +42,8 @@
 #include "64460.h"
 #include "mv_regs.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef	DEBUG
 #define	MAP_PCI
 
@@ -246,8 +248,6 @@
 /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
 static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long spd_checksum;
 
 #ifdef ZUMA_NTL
diff --git a/board/adsvix/adsvix.c b/board/adsvix/adsvix.c
index 5e770e9..c430d63 100644
--- a/board/adsvix/adsvix.c
+++ b/board/adsvix/adsvix.c
@@ -30,6 +30,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 /*
@@ -38,8 +40,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -62,8 +62,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c
index a2595ee..dcafac9 100644
--- a/board/amcc/ebony/ebony.c
+++ b/board/amcc/ebony/ebony.c
@@ -28,6 +28,8 @@
 #define FLASH_ONBD_N		2	/* 00000010 */
 #define FLASH_SRAM_SEL		1	/* 00000001 */
 
+DECLARE_GLOBAL_DATA_PTR;
+
 long int fixed_sdram(void);
 
 int board_early_init_f(void)
@@ -107,7 +109,7 @@
 	long dram_size = 0;
 
 #if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram(0);
+	dram_size = spd_sdram();
 #else
 	dram_size = fixed_sdram();
 #endif
@@ -235,8 +237,6 @@
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index c6b79a9..06a57f6c 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -28,6 +28,7 @@
 #include <spd_sdram.h>
 #include "epld.h"
 
+DECLARE_GLOBAL_DATA_PTR;
 
 extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
@@ -291,8 +292,6 @@
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index d1a29c5..3f6d204 100644
--- a/board/amcc/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -30,6 +30,8 @@
 #include <spd_sdram.h>
 #include <ppc4xx_enet.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define BOOT_SMALL_FLASH	32	/* 00100000 */
 #define FLASH_ONBD_N		2	/* 00000010 */
 #define FLASH_SRAM_SEL		1	/* 00000001 */
@@ -204,7 +206,7 @@
 	long dram_size = 0;
 
 #if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram (0);
+	dram_size = spd_sdram ();
 #else
 	dram_size = fixed_sdram ();
 #endif
@@ -334,8 +336,6 @@
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c
index f1a96a6..292e026 100644
--- a/board/amcc/walnut/walnut.c
+++ b/board/amcc/walnut/walnut.c
@@ -99,7 +99,7 @@
  */
 long int initdram(int board_type)
 {
-	return spd_sdram(0);
+	return spd_sdram();
 }
 
 int testdram(void)
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
index 8ddf910..20965c8 100644
--- a/board/amcc/yellowstone/yellowstone.c
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -24,6 +24,8 @@
 #include <asm/processor.h>
 #include <spd_sdram.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 int board_early_init_f(void)
@@ -136,7 +138,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	uint pbcr;
 	int size_val = 0;
 
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 509d8e4..392d0dc 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -24,6 +24,8 @@
 #include <asm/processor.h>
 #include <spd_sdram.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 int board_early_init_f(void)
@@ -132,7 +134,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	uint pbcr;
 	int size_val = 0;
 
diff --git a/board/amirix/ap1000/serial.c b/board/amirix/ap1000/serial.c
index 39c4157..c6ee772 100644
--- a/board/amirix/ap1000/serial.c
+++ b/board/amirix/ap1000/serial.c
@@ -27,9 +27,7 @@
 
 #include <ns16550.h>
 
-#if 0
-#include "serial.h"
-#endif
+DECLARE_GLOBAL_DATA_PTR;
 
 const NS16550_t COM_PORTS[] =
 	{ (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 };
@@ -40,8 +38,6 @@
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
 
 	(void) NS16550_init (COM_PORTS[0], clock_divisor);
@@ -71,8 +67,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
 
 #ifdef CFG_INIT_CHAN1
diff --git a/board/armadillo/armadillo.c b/board/armadillo/armadillo.c
index de04c66..ca5bd1d 100644
--- a/board/armadillo/armadillo.c
+++ b/board/armadillo/armadillo.c
@@ -28,6 +28,8 @@
 #include <common.h>
 #include <clps7111.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 
@@ -37,8 +39,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Activate LED flasher */
 	IO_LEDFLSH = 0x40;
 
@@ -53,8 +53,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/assabet/assabet.c b/board/assabet/assabet.c
index d3ccbb5..4f84a58 100644
--- a/board/assabet/assabet.c
+++ b/board/assabet/assabet.c
@@ -27,6 +27,8 @@
 #include <common.h>
 #include <SA-1100.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 /*
@@ -99,8 +101,6 @@
 int
 board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_arch_number = MACH_TYPE_ASSABET;
 	gd->bd->bi_boot_params = 0xc0000100;
 
@@ -112,8 +112,6 @@
 int
 dram_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/at91rm9200dk/at91rm9200dk.c b/board/at91rm9200dk/at91rm9200dk.c
index 9016776..002981a 100644
--- a/board/at91rm9200dk/at91rm9200dk.c
+++ b/board/at91rm9200dk/at91rm9200dk.c
@@ -27,6 +27,8 @@
 #include <at91rm9200_net.h>
 #include <dm9161.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 /*
  * Miscelaneous platform dependent initialisations
@@ -34,8 +36,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Enable Ctrlc */
 	console_init_f ();
 
@@ -56,8 +56,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
 	return 0;
diff --git a/board/bmw/serial.c b/board/bmw/serial.c
index f36a41b..712a95b 100644
--- a/board/bmw/serial.c
+++ b/board/bmw/serial.c
@@ -24,6 +24,8 @@
 #include <common.h>
 #include "ns16550.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if CONFIG_CONS_INDEX == 1
 static struct NS16550 *console =
 		(struct NS16550 *) (CFG_EUMB_ADDR + 0x4500);
@@ -38,8 +40,6 @@
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int clock_divisor = gd->bus_clk / 16 / gd->baudrate;
 
 	NS16550_init (CONFIG_CONS_INDEX - 1, clock_divisor);
@@ -75,8 +75,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int clock_divisor = get_bus_freq (0) / 16 / gd->baudrate;
 
 	NS16550_reinit (console, clock_divisor);
diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c
index cc1bc16..307894f 100644
--- a/board/cerf250/cerf250.c
+++ b/board/cerf250/cerf250.c
@@ -27,6 +27,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 
@@ -36,8 +38,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -60,8 +60,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/cm4008/cm4008.c b/board/cm4008/cm4008.c
index 4d2013b..d34737c 100644
--- a/board/cm4008/cm4008.c
+++ b/board/cm4008/cm4008.c
@@ -31,6 +31,8 @@
 #include <common.h>
 #include <asm/arch/platform.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 #define	ks8695_read(a)	  *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
@@ -75,8 +77,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of CM4008 */
 	gd->bd->bi_arch_number = 624;
 
@@ -92,8 +92,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/cm41xx/cm41xx.c b/board/cm41xx/cm41xx.c
index 65eaa94..02d05af 100644
--- a/board/cm41xx/cm41xx.c
+++ b/board/cm41xx/cm41xx.c
@@ -31,6 +31,8 @@
 #include <common.h>
 #include <asm/arch/platform.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 #define	ks8695_read(a)	  *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
@@ -75,8 +77,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of CM41xx */
 	gd->bd->bi_arch_number = 672;
 
@@ -92,8 +92,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/cmc_pu2/cmc_pu2.c b/board/cmc_pu2/cmc_pu2.c
index 14168e6..9ae3c42 100644
--- a/board/cmc_pu2/cmc_pu2.c
+++ b/board/cmc_pu2/cmc_pu2.c
@@ -33,6 +33,8 @@
 #include <at91rm9200_net.h>
 #include <dm9161.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 /*
  * Miscelaneous platform dependent initialisations
@@ -45,7 +47,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	AT91PS_PIO piob = AT91C_BASE_PIOB;
 	AT91PS_PIO pioc = AT91C_BASE_PIOC;
 
@@ -109,8 +110,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
 	return 0;
diff --git a/board/cogent/serial.c b/board/cogent/serial.c
index 4c20017..2b595a8 100644
--- a/board/cogent/serial.c
+++ b/board/cogent/serial.c
@@ -6,6 +6,8 @@
 #include <common.h>
 #include <board/cogent/serial.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR)
 
 #if (defined(CONFIG_8xx) && defined(CONFIG_8xx_CONS_NONE)) || \
@@ -25,76 +27,65 @@
 
 int serial_init (void)
 {
-/*  DECLARE_GLOBAL_DATA_PTR; */
+	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
 
-    cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
+	cma_mb_reg_write (&mbsp->ser_ier, 0x00);	/* turn off interrupts */
+	serial_setbrg ();
+	cma_mb_reg_write (&mbsp->ser_lcr, 0x03);	/* 8 data, 1 stop, no parity */
+	cma_mb_reg_write (&mbsp->ser_mcr, 0x03);	/* RTS/DTR */
+	cma_mb_reg_write (&mbsp->ser_fcr, 0x07);	/* Clear & enable FIFOs */
 
-    cma_mb_reg_write(&mbsp->ser_ier, 0x00);	/* turn off interrupts */
-    serial_setbrg ();
-    cma_mb_reg_write(&mbsp->ser_lcr, 0x03);	/* 8 data, 1 stop, no parity */
-    cma_mb_reg_write(&mbsp->ser_mcr, 0x03);	/* RTS/DTR */
-    cma_mb_reg_write(&mbsp->ser_fcr, 0x07);	/* Clear & enable FIFOs */
-
-    return (0);
+	return (0);
 }
 
-void
-serial_setbrg (void)
+void serial_setbrg (void)
 {
-    DECLARE_GLOBAL_DATA_PTR;
+	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
+	unsigned int divisor;
+	unsigned char lcr;
 
-    cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
-    unsigned int divisor;
-    unsigned char lcr;
+	if ((divisor = br_to_div (gd->baudrate)) == 0)
+		divisor = DEFDIV;
 
-    if ((divisor = br_to_div(gd->baudrate)) == 0)
-	divisor = DEFDIV;
-
-    lcr = cma_mb_reg_read(&mbsp->ser_lcr);
-    cma_mb_reg_write(&mbsp->ser_lcr, lcr|0x80);/* Access baud rate(set DLAB)*/
-    cma_mb_reg_write(&mbsp->ser_brl, divisor & 0xff);
-    cma_mb_reg_write(&mbsp->ser_brh, (divisor >> 8) & 0xff);
-    cma_mb_reg_write(&mbsp->ser_lcr, lcr);	/* unset DLAB */
+	lcr = cma_mb_reg_read (&mbsp->ser_lcr);
+	cma_mb_reg_write (&mbsp->ser_lcr, lcr | 0x80);	/* Access baud rate(set DLAB) */
+	cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff);
+	cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff);
+	cma_mb_reg_write (&mbsp->ser_lcr, lcr);	/* unset DLAB */
 }
 
-void
-serial_putc(const char c)
+void serial_putc (const char c)
 {
-    cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
+	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
 
-    if (c == '\n')
-	serial_putc('\r');
+	if (c == '\n')
+		serial_putc ('\r');
 
-    while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_THRE) == 0)
-	;
+	while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0);
 
-    cma_mb_reg_write(&mbsp->ser_thr, c);
+	cma_mb_reg_write (&mbsp->ser_thr, c);
 }
 
-void
-serial_puts(const char *s)
+void serial_puts (const char *s)
 {
-    while (*s != '\0')
-	serial_putc(*s++);
+	while (*s != '\0')
+		serial_putc (*s++);
 }
 
-int
-serial_getc(void)
+int serial_getc (void)
 {
-    cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
+	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
 
-    while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) == 0)
-	;
+	while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0);
 
-    return ((int)cma_mb_reg_read(&mbsp->ser_rhr) & 0x7f);
+	return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f);
 }
 
-int
-serial_tstc(void)
+int serial_tstc (void)
 {
-    cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
+	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
 
-    return ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) != 0);
+	return ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) != 0);
 }
 
 #endif /* CONS_NONE */
@@ -118,71 +109,63 @@
 #error CONFIG_KGDB_INDEX must be configured for Cogent motherboard serial
 #endif
 
-void
-kgdb_serial_init(void)
+void kgdb_serial_init (void)
 {
-    cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
-    unsigned int divisor;
+	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
+	unsigned int divisor;
 
-    if ((divisor = br_to_div(CONFIG_KGDB_BAUDRATE)) == 0)
-	divisor = DEFDIV;
+	if ((divisor = br_to_div (CONFIG_KGDB_BAUDRATE)) == 0)
+		divisor = DEFDIV;
 
-    cma_mb_reg_write(&mbsp->ser_ier, 0x00);	/* turn off interrupts */
-    cma_mb_reg_write(&mbsp->ser_lcr, 0x80);	/* Access baud rate(set DLAB)*/
-    cma_mb_reg_write(&mbsp->ser_brl, divisor & 0xff);
-    cma_mb_reg_write(&mbsp->ser_brh, (divisor >> 8) & 0xff);
-    cma_mb_reg_write(&mbsp->ser_lcr, 0x03);	/* 8 data, 1 stop, no parity */
-    cma_mb_reg_write(&mbsp->ser_mcr, 0x03);	/* RTS/DTR */
-    cma_mb_reg_write(&mbsp->ser_fcr, 0x07);	/* Clear & enable FIFOs */
+	cma_mb_reg_write (&mbsp->ser_ier, 0x00);	/* turn off interrupts */
+	cma_mb_reg_write (&mbsp->ser_lcr, 0x80);	/* Access baud rate(set DLAB) */
+	cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff);
+	cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff);
+	cma_mb_reg_write (&mbsp->ser_lcr, 0x03);	/* 8 data, 1 stop, no parity */
+	cma_mb_reg_write (&mbsp->ser_mcr, 0x03);	/* RTS/DTR */
+	cma_mb_reg_write (&mbsp->ser_fcr, 0x07);	/* Clear & enable FIFOs */
 
-    printf("[on cma10x serial port B] ");
+	printf ("[on cma10x serial port B] ");
 }
 
-void
-putDebugChar(int c)
+void putDebugChar (int c)
 {
-    cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
+	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
 
-    while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_THRE) == 0)
-	;
+	while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0);
 
-    cma_mb_reg_write(&mbsp->ser_thr, c & 0xff);
+	cma_mb_reg_write (&mbsp->ser_thr, c & 0xff);
 }
 
-void
-putDebugStr(const char *str)
+void putDebugStr (const char *str)
 {
-    while (*str != '\0') {
-	if (*str == '\n')
-	    putDebugChar('\r');
-	putDebugChar(*str++);
-    }
+	while (*str != '\0') {
+		if (*str == '\n')
+			putDebugChar ('\r');
+		putDebugChar (*str++);
+	}
 }
 
-int
-getDebugChar(void)
+int getDebugChar (void)
 {
-    cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
+	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
 
-    while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) == 0)
-	;
+	while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0);
 
-    return ((int)cma_mb_reg_read(&mbsp->ser_rhr) & 0x7f);
+	return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f);
 }
 
-void
-kgdb_interruptible(int yes)
+void kgdb_interruptible (int yes)
 {
-    cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
+	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
 
-    if (yes == 1) {
-	printf("kgdb: turning serial ints on\n");
-	cma_mb_reg_write(&mbsp->ser_ier, 0xf);
-    }
-    else {
-	printf("kgdb: turning serial ints off\n");
-	cma_mb_reg_write(&mbsp->ser_ier, 0x0);
-    }
+	if (yes == 1) {
+		printf ("kgdb: turning serial ints on\n");
+		cma_mb_reg_write (&mbsp->ser_ier, 0xf);
+	} else {
+		printf ("kgdb: turning serial ints off\n");
+		cma_mb_reg_write (&mbsp->ser_ier, 0x0);
+	}
 }
 
 #endif /* KGDB && KGDB_NONE */
diff --git a/board/cradle/cradle.c b/board/cradle/cradle.c
index 6f65f32..6d8d555 100644
--- a/board/cradle/cradle.c
+++ b/board/cradle/cradle.c
@@ -28,6 +28,8 @@
 #include <asm/arch/pxa-regs.h>
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 
@@ -181,8 +183,6 @@
 board_init (void)
 /**********************************************************/
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	led_code (0xf, YELLOW);
 
 	/* arch number of HHP Cradle */
@@ -209,8 +209,6 @@
 dram_init (void)
 /**********************************************************/
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c
index c99a715..80caf8b 100644
--- a/board/csb226/csb226.c
+++ b/board/csb226/csb226.c
@@ -26,6 +26,8 @@
 #include <common.h>
 #include <asm/arch/pxa-regs.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_SHOW_BOOT_PROGRESS
 # define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
 #else
@@ -65,8 +67,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -88,8 +88,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/csb637/csb637.c b/board/csb637/csb637.c
index 6100a53..aeb1a13 100644
--- a/board/csb637/csb637.c
+++ b/board/csb637/csb637.c
@@ -26,6 +26,8 @@
 #include <at91rm9200_net.h>
 #include <bcm5221.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 /*
  * Miscelaneous platform dependent initialisations
@@ -33,8 +35,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Enable Ctrlc */
 	console_init_f ();
 
@@ -51,8 +51,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
 	return 0;
diff --git a/board/cu824/cu824.c b/board/cu824/cu824.c
index 5844a5c..3edd27a 100644
--- a/board/cu824/cu824.c
+++ b/board/cu824/cu824.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2001
  * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
  *
- * (C) Copyright 2001, 2002
+ * (C) Copyright 2001-2006
  * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
 
  * See file CREDITS for list of people who contributed to this
@@ -29,12 +29,12 @@
 #include <asm/processor.h>
 #include <pci.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define BOARD_REV_REG 0xFE80002B
 
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char  revision = *(volatile char *)(BOARD_REV_REG);
 	char  buf[32];
 
diff --git a/board/dave/B2/B2.c b/board/dave/B2/B2.c
index 29676b8..64fe948 100644
--- a/board/dave/B2/B2.c
+++ b/board/dave/B2/B2.c
@@ -27,13 +27,14 @@
 #include <common.h>
 #include <asm/hardware.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Miscelaneous platform dependent initialization
  */
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	u32 temp;
 
 	/* Configuration Port Control Register*/
@@ -119,8 +120,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index 52055b8..e8302d9 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -29,6 +29,8 @@
 #include <command.h>
 #include <malloc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 /* Prototypes */
@@ -81,8 +83,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* adjust flash start and size as well as the offset */
 	gd->bd->bi_flashstart = 0 - flash_info[0].size;
 	gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN;
diff --git a/board/delta/delta.c b/board/delta/delta.c
index 6ef7e2f..2b72386 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -30,6 +30,8 @@
 #include <da9030.h>
 #include <asm/arch/pxa-regs.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 static void init_DA9030(void);
@@ -40,8 +42,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -65,8 +65,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/dnp1110/dnp1110.c b/board/dnp1110/dnp1110.c
index 24c3e00..ab8e7be 100644
--- a/board/dnp1110/dnp1110.c
+++ b/board/dnp1110/dnp1110.c
@@ -24,8 +24,8 @@
 
 #include <common.h>
 #include <SA-1100.h>
-/* ------------------------------------------------------------------------- */
 
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -33,25 +33,21 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
 	/* arch number of DNP1110-Board */
 	gd->bd->bi_arch_number = MACH_TYPE_DNP1110;
 
-    /* flash vpp on */
-    PPDR |= 0x80;	/* assumes LCD controller is off */
-    PPSR |= 0x80;
+	/* flash vpp on */
+	PPDR |= 0x80;	/* assumes LCD controller is off */
+	PPSR |= 0x80;
 
 	return 0;
 }
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c
index fc48ed5..555475e 100644
--- a/board/eltec/bab7xx/bab7xx.c
+++ b/board/eltec/bab7xx/bab7xx.c
@@ -31,6 +31,8 @@
 #include <ns87308.h>
 #include <video_fb.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*---------------------------------------------------------------------------*/
 /*
  * Get Bus clock frequency
@@ -169,8 +171,6 @@
 
 void after_reloc (ulong dest_addr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*
 	 * Jump to the main U-Boot board init code
 	 */
diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c
index a9dbeb2..108adb1 100644
--- a/board/eltec/elppc/elppc.c
+++ b/board/eltec/elppc/elppc.c
@@ -26,6 +26,8 @@
 #include <mpc106.h>
 #include <video_fb.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 int checkboard (void)
@@ -137,8 +139,6 @@
 
 void after_reloc (ulong dest_addr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*
 	 * Jump to the main U-Boot board init code
 	 */
diff --git a/board/ep7312/ep7312.c b/board/ep7312/ep7312.c
index 11eab23..6968a5d 100644
--- a/board/ep7312/ep7312.c
+++ b/board/ep7312/ep7312.c
@@ -25,8 +25,7 @@
 #include <common.h>
 #include <clps7111.h>
 
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -34,8 +33,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Activate LED flasher */
 	IO_LEDFLSH = 0x40;
 
@@ -50,8 +47,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c
index 4b2b07a..078df00 100644
--- a/board/esd/apc405/apc405.c
+++ b/board/esd/apc405/apc405.c
@@ -26,7 +26,7 @@
 #include <command.h>
 #include <malloc.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
 
 #if 0
 #define FPGA_DEBUG
@@ -166,8 +166,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile unsigned short *fpga_mode =
 		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
 	volatile unsigned short *fpga_ctrl2 =
@@ -301,8 +299,6 @@
 
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned char str[64];
 	int i = getenv_r ("serial#", str, sizeof(str));
 
diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c
index 3aac3c6..dfead33 100644
--- a/board/esd/ar405/ar405.c
+++ b/board/esd/ar405/ar405.c
@@ -26,6 +26,8 @@
 #include <asm/processor.h>
 #include <command.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*cmd_boot.c*/
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 extern void lxt971_no_sleep(void);
@@ -53,8 +55,6 @@
 
 int board_early_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int index, len, i;
 	int status;
 
@@ -151,8 +151,6 @@
 
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int index;
 	int len;
 	char str[64];
diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c
index 2ced6cb..055a397 100644
--- a/board/esd/canbt/canbt.c
+++ b/board/esd/canbt/canbt.c
@@ -26,6 +26,7 @@
 #include <asm/processor.h>
 #include <command.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 /*cmd_boot.c*/
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -50,8 +51,6 @@
 
 int board_early_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long cntrl0Reg;
 	int index, len, i;
 	int status;
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index e283a92..cb04710 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -26,10 +26,10 @@
 #include <command.h>
 #include <malloc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 extern void lxt971_no_sleep(void);
 
-
 /* fpga configuration data - not compressed, generated by bin2c */
 const unsigned char fpgadata[] =
 {
@@ -87,8 +87,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index 1a27ca0..36bf329 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -26,6 +26,8 @@
 #include <command.h>
 #include <malloc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int board_early_init_f (void)
 {
 	unsigned long cntrl0Reg;
@@ -74,7 +76,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned long cntrl0Reg;
 
 	/* adjust flash start and offset */
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index 2ab9673..f803610 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -27,7 +27,8 @@
 #include <malloc.h>
 #include <net.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
+
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);       /*cmd_boot.c*/
 #if 0
 #define FPGA_DEBUG
@@ -100,8 +101,6 @@
 #endif
 
 #ifdef FPGA_DEBUG
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* set up serial port with default baudrate */
 	(void) get_clocks ();
 	gd->baudrate = CONFIG_BAUDRATE;
@@ -126,8 +125,6 @@
 		if (status != 0) {
 			/* booting FPGA failed */
 #ifndef FPGA_DEBUG
-			DECLARE_GLOBAL_DATA_PTR;
-
 			/* set up serial port with default baudrate */
 			(void) get_clocks ();
 			gd->baudrate = CONFIG_BAUDRATE;
@@ -268,7 +265,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned long cntrl0Reg;
 
 	/* adjust flash start and offset */
@@ -707,8 +703,6 @@
  */
 int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	bd_t *bd = gd->bd;
 	char *buf;
 	ulong crc;
diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c
index 52398b2..25c10e0 100644
--- a/board/esd/cpci750/mpsc.c
+++ b/board/esd/cpci750/mpsc.c
@@ -42,6 +42,8 @@
 
 #include "../../Marvell/include/memory.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* Define this if you wish to use the MPSC as a register based UART.
  * This will force the serial port to not use the SDMA engine at all.
  */
@@ -157,7 +159,6 @@
  * global variables [josh] */
 int mpsc_putchar_early (char ch)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int mpsc = CHANNEL;
 	int temp =
 		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
@@ -510,7 +511,6 @@
 
 int galbrg_set_baudrate (int channel, int rate)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int clock;
 
 	galbrg_disable (channel);	/*ok */
diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c
index be176dc..bc84ef0 100644
--- a/board/esd/cpci750/mv_eth.c
+++ b/board/esd/cpci750/mv_eth.c
@@ -733,6 +733,7 @@
 	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
 	pkt_info.byte_cnt = dataSize;
 	pkt_info.buf_ptr = (unsigned int) dataPtr;
+	pkt_info.return_info = 0;
 
 	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
 	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index db545ef..6bdfc1d 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -45,6 +45,7 @@
 #include "64360.h"
 #include "mv_regs.h"
 
+DECLARE_GLOBAL_DATA_PTR;
 
 #undef	DEBUG
 /* #define DEBUG */
@@ -250,8 +251,6 @@
 /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
 static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long spd_checksum;
 
 	uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c
index 44de052..ba32ac1 100644
--- a/board/esd/cpci750/serial.c
+++ b/board/esd/cpci750/serial.c
@@ -38,13 +38,12 @@
 #include "../../Marvell/include/memory.h"
 #include "serial.h"
 
-
 #include "mpsc.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	mpsc_init (gd->baudrate);
 
 	return (0);
@@ -70,8 +69,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
 }
 
diff --git a/board/esd/cpciiser4/cpciiser4.c b/board/esd/cpciiser4/cpciiser4.c
index 7bf7bb5..fcb8cbb 100644
--- a/board/esd/cpciiser4/cpciiser4.c
+++ b/board/esd/cpciiser4/cpciiser4.c
@@ -26,6 +26,8 @@
 #include <asm/processor.h>
 #include <command.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*cmd_boot.c*/
 
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -55,8 +57,6 @@
 
 int board_early_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int index, len, i;
 	volatile unsigned char dummy;
 	int status;
diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c
index fd51f7f..240ab78 100644
--- a/board/esd/dp405/dp405.c
+++ b/board/esd/dp405/dp405.c
@@ -26,6 +26,7 @@
 #include <command.h>
 #include <malloc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 /* fpga configuration data - not compressed, generated by bin2c */
 const unsigned char fpgadata[] =
@@ -84,8 +85,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c
index 26e8341..a019ce4 100644
--- a/board/esd/du405/du405.c
+++ b/board/esd/du405/du405.c
@@ -28,6 +28,8 @@
 #include <405gp_i2c.h>
 #include <command.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*cmd_boot.c*/
 
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -55,8 +57,6 @@
 
 int board_early_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int index, len, i;
 	int status;
 
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index 99fd556..ea344c0 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -34,6 +34,8 @@
 #include <pci.h>
 #include <sm501.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_VIDEO_SM501
 
 #define SWAP32(x)	 ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\
@@ -358,8 +360,6 @@
 
 int cf_enable(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int i;
 
 	volatile unsigned short *fpga_ctrl =
@@ -391,8 +391,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile unsigned short *fpga_ctrl =
 		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
 	volatile unsigned short *lcd_contrast =
@@ -628,8 +626,6 @@
 
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char str[64];
 	int i = getenv_r ("serial#", str, sizeof(str));
 
@@ -673,8 +669,6 @@
 #ifdef CONFIG_IDE_RESET
 void ide_set_reset(int on)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile unsigned short *fpga_mode =
 		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
 	volatile unsigned short *fpga_status =
@@ -788,8 +782,6 @@
  */
 void video_get_info_str (int line_number, char *info)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char str[64];
 	char str2[64];
 	int i = getenv_r("serial#", str2, sizeof(str));
diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c
index 0c6771f..1e0accb 100644
--- a/board/esd/hub405/hub405.c
+++ b/board/esd/hub405/hub405.c
@@ -26,10 +26,10 @@
 #include <command.h>
 #include <malloc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 extern void lxt971_no_sleep(void);
 
-
 int board_revision(void)
 {
 	unsigned long osrl_reg;
@@ -110,8 +110,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
 	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
 	volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4);
@@ -208,8 +206,6 @@
  */
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char str[64];
 	int i = getenv_r ("serial#", str, sizeof(str));
 
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 4be4d7e..e5d2273 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -30,6 +30,7 @@
 
 #include "pci405.h"
 
+DECLARE_GLOBAL_DATA_PTR;
 
 /* Prototypes */
 int gunzip(void *, int, unsigned char *, unsigned long *);
@@ -111,8 +112,6 @@
 
 unsigned long fpga_done_state(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (gd->board_type < 2) {
 		return FPGA_DONE_STATE_V11;
 	} else {
@@ -123,8 +122,6 @@
 
 unsigned long fpga_init_state(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (gd->board_type < 2) {
 		return FPGA_INIT_STATE_V11;
 	} else {
@@ -320,8 +317,6 @@
 
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char str[64];
 	int i = getenv_r ("serial#", str, sizeof(str));
 
diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
index f9e4d43..7499671 100644
--- a/board/esd/pmc405/pmc405.c
+++ b/board/esd/pmc405/pmc405.c
@@ -29,10 +29,10 @@
 #include <command.h>
 #include <malloc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 extern void lxt971_no_sleep(void);
 
-
 /* fpga configuration data - not compressed, generated by bin2c */
 const unsigned char fpgadata[] =
 {
@@ -100,8 +100,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
diff --git a/board/esd/vom405/vom405.c b/board/esd/vom405/vom405.c
index bc5fa7c..8be552e 100644
--- a/board/esd/vom405/vom405.c
+++ b/board/esd/vom405/vom405.c
@@ -26,10 +26,10 @@
 #include <command.h>
 #include <malloc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 extern void lxt971_no_sleep(void);
 
-
 /* fpga configuration data - not compressed, generated by bin2c */
 const unsigned char fpgadata[] =
 {
@@ -81,8 +81,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
diff --git a/board/etin/debris/debris.c b/board/etin/debris/debris.c
index 93c502c..08ed635 100644
--- a/board/etin/debris/debris.c
+++ b/board/etin/debris/debris.c
@@ -26,6 +26,8 @@
 #include <pci.h>
 #include <i2c.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int checkboard (void)
 {
 	/*TODO: Check processor type */
@@ -170,8 +172,6 @@
 
 int misc_init_r(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Write ethernet addr in NVRAM for VxWorks */
 	nvram_write(CFG_ENV_ADDR + CFG_NVRAM_VXWORKS_OFFS,
 			(char*)&gd->bd->bi_enetaddr[0], 6);
diff --git a/board/etx094/etx094.c b/board/etx094/etx094.c
index dba3c11..eb58b5d 100644
--- a/board/etx094/etx094.c
+++ b/board/etx094/etx094.c
@@ -24,6 +24,8 @@
 #include <common.h>
 #include <mpc8xx.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 static long int dram_size (long int, long int *, long int);
@@ -90,8 +92,6 @@
 
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char *s = getenv ("serial#");
 	char *e;
 
diff --git a/board/evb4510/evb4510.c b/board/evb4510/evb4510.c
index 0008e5a..13abbb7 100644
--- a/board/evb4510/evb4510.c
+++ b/board/evb4510/evb4510.c
@@ -25,6 +25,8 @@
 #include <asm/hardware.h>
 #include <command.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_EVB4510
 
 /* ------------------------------------------------------------------------- */
@@ -35,8 +37,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	icache_enable();
 
 	/* address for the kernel command line */
@@ -52,7 +52,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
 #if CONFIG_NR_DRAM_BANKS == 2
diff --git a/board/evb64260/evb64260.c b/board/evb64260/evb64260.c
index 6a9d164..ab59941 100644
--- a/board/evb64260/evb64260.c
+++ b/board/evb64260/evb64260.c
@@ -37,6 +37,9 @@
 #include "mpsc.h"
 #include "i2c.h"
 #include "64260.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_ZUMA_V2
 extern void zuma_mbox_init(void);
 #endif
@@ -323,8 +326,6 @@
 void
 after_reloc(ulong dest_addr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* check to see if we booted from the sram.  If so, move things
 	 * back to the way they should be. (we're running from main
 	 * memory at this point now */
diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c
index ee623ca..98ac7f6 100644
--- a/board/evb64260/mpsc.c
+++ b/board/evb64260/mpsc.c
@@ -32,6 +32,8 @@
 #include <malloc.h>
 #include "mpsc.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int (*mpsc_putchar)(char ch) = mpsc_putchar_early;
 
 static volatile unsigned int *rx_desc_base=NULL;
@@ -115,7 +117,6 @@
 int
 mpsc_putchar_early(char ch)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int mpsc=CHANNEL;
 	int temp=GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
 	galmpsc_set_tcschar(mpsc,ch);
@@ -177,79 +178,82 @@
 	return 0;
 }
 
-char
-mpsc_getchar(void)
+char mpsc_getchar (void)
 {
-    DECLARE_GLOBAL_DATA_PTR;
-    static unsigned int done = 0;
-    volatile char ch;
-    unsigned int len=0, idx=0, temp;
+	static unsigned int done = 0;
+	volatile char ch;
+	unsigned int len = 0, idx = 0, temp;
 
-    volatile unsigned int *p;
+	volatile unsigned int *p;
 
 
-    do {
-	p=&rx_desc_base[rx_desc_index*8];
+	do {
+		p = &rx_desc_base[rx_desc_index * 8];
 
-	INVALIDATE_DCACHE(&p[0], &p[1]);
-	/* Wait for character */
-	while (p[1] & DESC_OWNER){
-	    udelay(100);
-	    INVALIDATE_DCACHE(&p[0], &p[1]);
-	}
+		INVALIDATE_DCACHE (&p[0], &p[1]);
+		/* Wait for character */
+		while (p[1] & DESC_OWNER) {
+			udelay (100);
+			INVALIDATE_DCACHE (&p[0], &p[1]);
+		}
 
-	/* Handle error case */
-	if (p[1] & (1<<15)) {
-		printf("oops, error: %08x\n", p[1]);
+		/* Handle error case */
+		if (p[1] & (1 << 15)) {
+			printf ("oops, error: %08x\n", p[1]);
 
-		temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,CHANNEL,GALMPSC_REG_GAP);
-		temp |= (1 << 23);
-		GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2, CHANNEL,GALMPSC_REG_GAP, temp);
+			temp = GTREGREAD_MIRROR (GALMPSC_CHANNELREG_2,
+						 CHANNEL, GALMPSC_REG_GAP);
+			temp |= (1 << 23);
+			GT_REG_WRITE_MIRROR (GALMPSC_CHANNELREG_2, CHANNEL,
+					     GALMPSC_REG_GAP, temp);
 
-		/* Can't poll on abort bit, so we just wait. */
-		udelay(100);
+			/* Can't poll on abort bit, so we just wait. */
+			udelay (100);
 
-		galsdma_enable_rx();
-	}
+			galsdma_enable_rx ();
+		}
 
-	/* Number of bytes left in this descriptor */
-	len = p[0] & 0xffff;
+		/* Number of bytes left in this descriptor */
+		len = p[0] & 0xffff;
 
-	if (len) {
-	    /* Where to look */
-	    idx = 5;
-	    if (done > 3) idx = 4;
-	    if (done > 7) idx = 7;
-	    if (done > 11) idx = 6;
+		if (len) {
+			/* Where to look */
+			idx = 5;
+			if (done > 3)
+				idx = 4;
+			if (done > 7)
+				idx = 7;
+			if (done > 11)
+				idx = 6;
 
-	    INVALIDATE_DCACHE(&p[idx], &p[idx+1]);
-	    ch = p[idx] & 0xff;
-	    done++;
-	}
+			INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
+			ch = p[idx] & 0xff;
+			done++;
+		}
 
-	if (done < len) {
-		/* this descriptor has more bytes still
-		 * shift down the char we just read, and leave the
-		 * buffer in place for the next time around
-		 */
-		p[idx] =  p[idx] >> 8;
-		FLUSH_DCACHE(&p[idx], &p[idx+1]);
-	}
+		if (done < len) {
+			/* this descriptor has more bytes still
+			 * shift down the char we just read, and leave the
+			 * buffer in place for the next time around
+			 */
+			p[idx] = p[idx] >> 8;
+			FLUSH_DCACHE (&p[idx], &p[idx + 1]);
+		}
 
-	if (done == len) {
-		/* nothing left in this descriptor.
-		 * go to next one
-		 */
-		p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST;
-		p[0] = 0x00100000;
-		FLUSH_DCACHE(&p[0], &p[1]);
-		/* Next descriptor */
-		rx_desc_index = (rx_desc_index + 1) % RX_DESC;
-		done = 0;
-	}
-    } while (len==0);	/* galileo bug.. len might be zero */
+		if (done == len) {
+			/* nothing left in this descriptor.
+			 * go to next one
+			 */
+			p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST;
+			p[0] = 0x00100000;
+			FLUSH_DCACHE (&p[0], &p[1]);
+			/* Next descriptor */
+			rx_desc_index = (rx_desc_index + 1) % RX_DESC;
+			done = 0;
+		}
+	} while (len == 0);	/* galileo bug.. len might be zero */
 
-    return ch;
+	return ch;
 }
 
 int
@@ -266,8 +270,6 @@
 int
 mpsc_init(int baud)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	memset(MIRROR_HACK, 0, sizeof(struct _tag_mirror_hack));
 	MIRROR_HACK->GALMPSC_ROUTING_REGISTER_M=0x3fffffff;
 
@@ -382,7 +384,6 @@
 int
 galbrg_set_baudrate(int channel, int rate)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int clock;
 
 	galbrg_disable(channel);
@@ -410,7 +411,6 @@
 static int
 galbrg_set_CDV(int channel, int value)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
@@ -424,7 +424,6 @@
 static int
 galbrg_enable(int channel)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
@@ -437,7 +436,6 @@
 static int
 galbrg_disable(int channel)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
@@ -450,7 +448,6 @@
 static int
 galbrg_set_clksrc(int channel, int value)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG,channel, GALBRG_REG_GAP);
@@ -583,7 +580,6 @@
 static int
 galmpsc_connect(int channel, int connect)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR_G(GALMPSC_ROUTING_REGISTER);
@@ -629,7 +625,6 @@
 static int
 galmpsc_route_rx_clock(int channel, int brg)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR_G(GALMPSC_RxC_ROUTE);
@@ -647,7 +642,6 @@
 static int
 galmpsc_route_tx_clock(int channel, int brg)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR_G(GALMPSC_TxC_ROUTE);
@@ -688,7 +682,6 @@
 static int
 galmpsc_config_channel_regs(int mpsc)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, 0);
 	GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, 0);
 	GT_REG_WRITE(GALMPSC_CHANNELREG_3+(mpsc*GALMPSC_REG_GAP), 1);
@@ -709,7 +702,6 @@
 static int
 galmpsc_set_brkcnt(int mpsc, int value)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP);
@@ -723,7 +715,6 @@
 static int
 galmpsc_set_tcschar(int mpsc, int value)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP);
@@ -737,7 +728,6 @@
 static int
 galmpsc_set_char_length(int mpsc, int value)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP);
@@ -751,7 +741,6 @@
 static int
 galmpsc_set_stop_bit_length(int mpsc, int value)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP);
@@ -764,7 +753,6 @@
 static int
 galmpsc_set_parity(int mpsc, int value)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int temp;
 
 	temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
@@ -784,7 +772,6 @@
 static int
 galmpsc_enter_hunt(int mpsc)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int temp;
 
 	temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
@@ -802,7 +789,6 @@
 static int
 galmpsc_shutdown(int mpsc)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #if 0
 	unsigned int temp;
 
diff --git a/board/evb64260/sdram_init.c b/board/evb64260/sdram_init.c
index 8d63c6f..fae6d10 100644
--- a/board/evb64260/sdram_init.c
+++ b/board/evb64260/sdram_init.c
@@ -35,6 +35,8 @@
 #include "i2c.h"
 #include "64260.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* #define	DEBUG */
 #define	MAP_PCI
 
@@ -199,7 +201,6 @@
  * the array which is passed in with the relevant information */
 static int check_dimm (uchar slot, sdram_info_t * info)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
 	int ret;
 	uchar rows, cols, sdram_banks, supp_cal, width, cal_val;
diff --git a/board/evb64260/serial.c b/board/evb64260/serial.c
index d9c7a15..191445c 100644
--- a/board/evb64260/serial.c
+++ b/board/evb64260/serial.c
@@ -39,6 +39,8 @@
 
 #include "mpsc.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
 const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1,
 				(NS16550_t) CFG_NS16550_COM2 };
@@ -48,8 +50,6 @@
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
 	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
 #endif
@@ -90,8 +90,6 @@
 void
 serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	galbrg_set_baudrate(CONFIG_MPSC_PORT, gd->baudrate);
 }
 
@@ -99,8 +97,6 @@
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
 
 #ifdef CFG_INIT_CHAN1
@@ -137,8 +133,6 @@
 void
 serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
 
 #ifdef CFG_INIT_CHAN1
diff --git a/board/ezkit533/ezkit533.c b/board/ezkit533/ezkit533.c
index f8ee900..8d6c8de 100644
--- a/board/ezkit533/ezkit533.c
+++ b/board/ezkit533/ezkit533.c
@@ -30,6 +30,8 @@
 #include "psd4256.h"
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int checkboard(void)
 {
 	printf("CPU:   ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
@@ -41,7 +43,6 @@
 
 long int initdram(int board_type)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
 	int brate;
 	char *tmp = getenv("baudrate");
diff --git a/board/gcplus/gcplus.c b/board/gcplus/gcplus.c
index 261e894..829b597 100644
--- a/board/gcplus/gcplus.c
+++ b/board/gcplus/gcplus.c
@@ -26,7 +26,8 @@
 
 #include <common.h>
 #include <SA-1100.h>
-/* ------------------------------------------------------------------------- */
+
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -35,8 +36,6 @@
 int
 board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_arch_number = MACH_TYPE_GRAPHICSCLIENT;
 
 	gd->bd->bi_boot_params = 0xc000003c; /* Weird address? */
@@ -62,8 +61,6 @@
 int
 dram_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c
index 37788d5..2ba7e0e 100644
--- a/board/gen860t/fpga.c
+++ b/board/gen860t/fpga.c
@@ -32,6 +32,8 @@
 #include <command.h>
 #include "fpga.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if (CONFIG_FPGA)
 
 #if 0
@@ -189,8 +191,6 @@
  */
 int gen860t_init_fpga (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int i;
 
 	PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off);
diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c
index b7a1b56..eb73221 100644
--- a/board/gen860t/gen860t.c
+++ b/board/gen860t/gen860t.c
@@ -30,6 +30,8 @@
 #include "fpga.h"
 #include "ioport.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_STATUS_LED
 #include <status_led.h>
 #endif
@@ -126,8 +128,6 @@
  */
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char *s;
 	char buf[64];
 	int i;
@@ -305,5 +305,3 @@
 	return 0;		/* No hotkeys supported */
 }
 #endif
-
-/* vim: set ts=4 sw=4 tw=78 : */
diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c
index e95d9ee..a523db1 100644
--- a/board/hermes/hermes.c
+++ b/board/hermes/hermes.c
@@ -32,6 +32,8 @@
 # define SHOW_BOOT_PROGRESS(arg)
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 static long int dram_size (long int, long int *, long int);
@@ -105,8 +107,6 @@
 
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char *s = getenv ("serial#");
 	char *e;
 
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
index 0596fa4..6868f26 100644
--- a/board/hymod/bsp.c
+++ b/board/hymod/bsp.c
@@ -28,6 +28,8 @@
 #include <net.h>
 #include <asm/iopin_8260.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*-----------------------------------------------------------------------
  * Board Special Commands: FPGA load/store, EEPROM erase
  */
@@ -75,8 +77,6 @@
 int
 fpga_load (int mezz, uchar *addr, ulong size)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
 	xlx_info_t *fp;
 	xlx_iopins_t *fpgaio;
diff --git a/board/hymod/env.c b/board/hymod/env.c
index f9e1421..062553b 100644
--- a/board/hymod/env.c
+++ b/board/hymod/env.c
@@ -23,6 +23,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* imports from fetch.c */
 extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *));
 
@@ -32,8 +34,6 @@
 static int
 env_callback (uchar *name, uchar *value)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
 	char ov[CFG_CBSIZE], nv[CFG_CBSIZE], *p, *q, *nn, c, *curver, *newver;
 	int override = 1, append = 0, remove = 0, nnl, ovl, nvl;
diff --git a/board/hymod/hymod.c b/board/hymod/hymod.c
index dea0a70..5e98e9e 100644
--- a/board/hymod/hymod.c
+++ b/board/hymod/hymod.c
@@ -30,6 +30,8 @@
 #include <i2c.h>
 #include <asm/iopin_8260.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 /* imports from eeprom.c */
@@ -424,8 +426,6 @@
 int
 last_stage_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
 	int rc;
 
diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c
index 081ef65..7b9a83d 100644
--- a/board/ids8247/ids8247.c
+++ b/board/ids8247/ids8247.c
@@ -25,6 +25,8 @@
 #include <ioports.h>
 #include <mpc8260.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * I/O Port configuration table
  *
@@ -295,8 +297,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_flashstart = 0xff800000;
 }
 
diff --git a/board/impa7/impa7.c b/board/impa7/impa7.c
index e496923..3230dd4 100644
--- a/board/impa7/impa7.c
+++ b/board/impa7/impa7.c
@@ -25,6 +25,8 @@
 #include <common.h>
 #include <clps7111.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 
@@ -34,8 +36,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Activate LED flasher */
 	IO_LEDFLSH = 0x40;
 
@@ -50,8 +50,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
index ae5402e..7f8f47c 100644
--- a/board/innokom/innokom.c
+++ b/board/innokom/innokom.c
@@ -27,6 +27,8 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/mach-types.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_SHOW_BOOT_PROGRESS
 # define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
 #else
@@ -95,8 +97,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -116,8 +116,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/integratorap/integratorap.c b/board/integratorap/integratorap.c
index d4f61d6..e659907 100644
--- a/board/integratorap/integratorap.c
+++ b/board/integratorap/integratorap.c
@@ -39,6 +39,8 @@
 #include <pci.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void flash__init (void);
 void ether__init (void);
 void peripheral_power_enable (void);
@@ -65,8 +67,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of Integrator Board */
 	gd->bd->bi_arch_number = MACH_TYPE_INTEGRATOR;
 
@@ -480,8 +480,6 @@
 ******************************/
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size	 = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/integratorcp/integratorcp.c b/board/integratorcp/integratorcp.c
index 216876b..d6d6e13 100644
--- a/board/integratorcp/integratorcp.c
+++ b/board/integratorcp/integratorcp.c
@@ -35,6 +35,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void flash__init (void);
 void ether__init (void);
 void peripheral_power_enable (void);
@@ -54,8 +56,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of Integrator Board */
 	gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR;
 
@@ -105,8 +105,6 @@
 ******************************/
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size	 = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c
index c04626a..aa96591 100644
--- a/board/ixdp425/ixdp425.c
+++ b/board/ixdp425/ixdp425.c
@@ -28,11 +28,7 @@
 #include <asm/arch/ixp425.h>
 #include <common.h>
 
-/* ------------------------------------------------------------------------- */
-
-
-/* local prototypes */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -49,8 +45,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of IXDP */
 	gd->bd->bi_arch_number = MACH_TYPE_IXDP425;
 
@@ -64,8 +58,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c
index 4a7cf77..ec51dca 100644
--- a/board/kb9202/kb9202.c
+++ b/board/kb9202/kb9202.c
@@ -31,7 +31,8 @@
 #include <at91rm9200_net.h>
 #include <lxt971a.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Miscelaneous platform dependent initialisations
  */
@@ -42,8 +43,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Enable Ctrlc */
 	console_init_f ();
 
@@ -60,8 +59,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
 	return 0;
diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c
index e621c43..4e377a1 100644
--- a/board/kup/kup4k/kup4k.c
+++ b/board/kup/kup4k/kup4k.c
@@ -29,6 +29,8 @@
    #include "s1d13706.h"
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef DEBUG
 #ifdef  DEBUG
 # define debugk(fmt,args...)    printf(fmt ,##args)
@@ -44,10 +46,6 @@
 
 /* ------------------------------------------------------------------------- */
 
-#if 0
-static long int dram_size (long int, long int *, long int);
-#endif
-
 #ifdef CONFIG_KUP4K_LOGO
 void lcd_logo(bd_t *bd);
 #endif
@@ -235,62 +233,8 @@
 
 /* ------------------------------------------------------------------------- */
 
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-#if 0
-static long int dram_size (long int mamr_value, long int *base,
-						   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	volatile long int *addr;
-	ulong cnt, val;
-	ulong save[32];				/* to make test non-destructive */
-	unsigned char i = 0;
-
-	memctl->memc_mamr = mamr_value;
-
-	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
-		addr = base + cnt;		/* pointer arith! */
-
-		save[i++] = *addr;
-		*addr = ~cnt;
-	}
-
-	/* write 0 to base address */
-	addr = base;
-	save[i] = *addr;
-	*addr = 0;
-
-	/* check at base address */
-	if ((val = *addr) != 0) {
-		*addr = save[i];
-		return (0);
-	}
-
-	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
-		addr = base + cnt;		/* pointer arith! */
-
-		val = *addr;
-		*addr = save[--i];
-
-		if (val != (~cnt)) {
-			return (cnt * sizeof (long));
-		}
-	}
-	return (maxsize);
-}
-#endif
-
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 #ifdef CONFIG_STATUS_LED
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 #endif
diff --git a/board/lart/lart.c b/board/lart/lart.c
index 66b730d..8d534c8 100644
--- a/board/lart/lart.c
+++ b/board/lart/lart.c
@@ -24,6 +24,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 
@@ -33,8 +35,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -49,7 +49,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	bd_t *bd = gd->bd;
 
 	bd->bi_dram[0].start = PHYS_SDRAM_1;
diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c
index 95634ac..14fd28f 100644
--- a/board/logodl/logodl.c
+++ b/board/logodl/logodl.c
@@ -25,6 +25,8 @@
 #include <common.h>
 #include <asm/arch/pxa-regs.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /**
  * board_init: - setup some data structures
  *
@@ -33,8 +35,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -57,8 +57,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c
index 4c373ee..e12bbf0 100644
--- a/board/lpd7a40x/lpd7a40x.c
+++ b/board/lpd7a40x/lpd7a40x.c
@@ -37,14 +37,14 @@
 
 #include <lpd7a400_cpld.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Miscellaneous platform dependent initialisations
  */
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* set up the I/O ports */
 
 	/* enable flash programming */
@@ -74,8 +74,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c
index e618ab9..5829170 100644
--- a/board/lubbock/lubbock.c
+++ b/board/lubbock/lubbock.c
@@ -27,8 +27,7 @@
 
 #include <common.h>
 
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -36,8 +35,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -60,8 +57,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index a174b57..9e8ea2d 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -45,6 +45,8 @@
 #include <linux/types.h>
 #include <linux/string.h>	/* for strdup */
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*------------------------ Local prototypes ---------------------------*/
 static long int dram_size (long int, long int *, long int);
 static void kbd_init (void);
@@ -455,8 +457,6 @@
  ***********************************************************************/
 int board_postclk_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	kbd_init();
 
 #ifdef CONFIG_MODEM_SUPPORT
@@ -471,15 +471,11 @@
 
 struct serial_device * default_serial_console (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	return gd->do_mdm_init ? &serial_scc_device : &serial_smc_device;
 }
 
 static void kbd_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uchar kbd_data[KEYBD_DATALEN];
 	uchar tmp_data[KEYBD_DATALEN];
 	uchar val, errcd;
@@ -571,8 +567,6 @@
  ***********************************************************************/
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uchar kbd_data[KEYBD_DATALEN];
 	char keybd_env[2 * KEYBD_DATALEN + 1];
 	uchar kbd_init_status = gd->kbd_status >> 8;
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index d1c99fd..456411d 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -30,6 +30,8 @@
 
 #include "mt48lc8m32b2-6-7.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern flash_info_t flash_info[];	/* FLASH chips info */
 
 ulong flash_get_size (ulong base, int banknum);
@@ -190,8 +192,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*
 	 * Adjust flash start and offset to detected values
 	 */
diff --git a/board/ml2/serial.c b/board/ml2/serial.c
index 92baba9..74687f1 100644
--- a/board/ml2/serial.c
+++ b/board/ml2/serial.c
@@ -29,70 +29,59 @@
 #include <ns16550.h>
 #endif
 
-#if 0
-#include "serial.h"
-#endif
+DECLARE_GLOBAL_DATA_PTR;
 
 #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
 const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1,
-				(NS16550_t) CFG_NS16550_COM2 };
+	(NS16550_t) CFG_NS16550_COM2
+};
 #endif
 
-int
-serial_init (void)
+int serial_init (void)
 {
-		DECLARE_GLOBAL_DATA_PTR;
-
-	    int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
 
 #ifdef CFG_INIT_CHAN1
-	    (void)NS16550_init(COM_PORTS[0], clock_divisor);
+	(void) NS16550_init (COM_PORTS[0], clock_divisor);
 #endif
 #ifdef CFG_INIT_CHAN2
-	    (void)NS16550_init(COM_PORTS[1], clock_divisor);
+	(void) NS16550_init (COM_PORTS[1], clock_divisor);
 #endif
-		return 0;
+	return 0;
 
 }
 
-void
-serial_putc(const char c)
+void serial_putc (const char c)
 {
-    if (c == '\n')
-	NS16550_putc(COM_PORTS[CFG_DUART_CHAN], '\r');
+	if (c == '\n')
+		NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
 
-    NS16550_putc(COM_PORTS[CFG_DUART_CHAN], c);
+	NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
 }
 
-int
-serial_getc(void)
+int serial_getc (void)
 {
-    return NS16550_getc(COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
 }
 
-int
-serial_tstc(void)
+int serial_tstc (void)
 {
-    return NS16550_tstc(COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
 }
 
-void
-serial_setbrg (void)
+void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
-    int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
 
 #ifdef CFG_INIT_CHAN1
-    NS16550_reinit(COM_PORTS[0], clock_divisor);
+	NS16550_reinit (COM_PORTS[0], clock_divisor);
 #endif
 #ifdef CFG_INIT_CHAN2
-    NS16550_reinit(COM_PORTS[1], clock_divisor);
+	NS16550_reinit (COM_PORTS[1], clock_divisor);
 #endif
 }
 
-void
-serial_puts (const char *s)
+void serial_puts (const char *s)
 {
 	while (*s) {
 		serial_putc (*s++);
@@ -100,32 +89,27 @@
 }
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-void
-kgdb_serial_init(void)
+void kgdb_serial_init (void)
 {
 }
 
-void
-putDebugChar (int c)
+void putDebugChar (int c)
 {
 	serial_putc (c);
 }
 
-void
-putDebugStr (const char *str)
+void putDebugStr (const char *str)
 {
 	serial_puts (str);
 }
 
-int
-getDebugChar (void)
+int getDebugChar (void)
 {
-	return serial_getc();
+	return serial_getc ();
 }
 
-void
-kgdb_interruptible (int yes)
+void kgdb_interruptible (int yes)
 {
 	return;
 }
-#endif	/* CFG_CMD_KGDB	*/
+#endif /* CFG_CMD_KGDB */
diff --git a/board/modnet50/modnet50.c b/board/modnet50/modnet50.c
index 448c623..4544069 100644
--- a/board/modnet50/modnet50.c
+++ b/board/modnet50/modnet50.c
@@ -24,8 +24,7 @@
 
 #include <common.h>
 
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -33,7 +32,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	/* address for the kernel command line */
 	gd->bd->bi_boot_params = 0x800;
 	return 0;
@@ -41,7 +39,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	if (CONFIG_NR_DRAM_BANKS == 2) {
diff --git a/board/mp2usb/mp2usb.c b/board/mp2usb/mp2usb.c
index e75be1e..486d44c 100644
--- a/board/mp2usb/mp2usb.c
+++ b/board/mp2usb/mp2usb.c
@@ -31,15 +31,14 @@
 #include <dm9161.h>
 #include <asm/mach-types.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Miscelaneous platform dependent initialisations
  */
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Enable Ctrlc */
 	console_init_f ();
 
@@ -56,8 +55,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
 	return 0;
diff --git a/board/mpc8349ads/mpc8349ads.c b/board/mpc8349ads/mpc8349ads.c
index 505acbc..9841298 100644
--- a/board/mpc8349ads/mpc8349ads.c
+++ b/board/mpc8349ads/mpc8349ads.c
@@ -64,7 +64,7 @@
 	/* DDR SDRAM - Main SODIMM */
 	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
 #if defined(CONFIG_SPD_EEPROM)
-	msize = spd_sdram(NULL);
+	msize = spd_sdram();
 #else
 	msize = fixed_sdram();
 #endif
diff --git a/board/mpc8349ads/pci.c b/board/mpc8349ads/pci.c
index c559424..319e35c 100644
--- a/board/mpc8349ads/pci.c
+++ b/board/mpc8349ads/pci.c
@@ -26,6 +26,8 @@
 #include <asm/mpc8349_pci.h>
 #include <i2c.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_PCI
 
 /* System RAM mapped to PCI space */
@@ -127,7 +129,6 @@
 void
 pci_init_board(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t *	immr;
 	volatile clk8349_t *	clk;
 	volatile law8349_t *	pci_law;
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index b331d6e..06d021a 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -42,6 +42,9 @@
 #include "../mip405/mip405.h"
 #include <405gp_pci.h>
 #endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_PATI)
 #define FIRM_START 0xFFF00000
 #endif
@@ -584,7 +587,6 @@
 void video_get_info_str (int line_number, char *info)
 {
 	/* init video info strings for graphic console */
-	DECLARE_GLOBAL_DATA_PTR;
 	PPC405_SYS_INFO sys_info;
 	char rev;
 	int i,boot;
diff --git a/board/mpl/common/memtst.c b/board/mpl/common/memtst.c
index 2c77d37..ff1190a 100644
--- a/board/mpl/common/memtst.c
+++ b/board/mpl/common/memtst.c
@@ -50,13 +50,15 @@
 #include <asm/processor.h>
 #include <405gp_i2c.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define FALSE           0
 #define TRUE            1
 
-#define TEST_QUIET 			8
+#define TEST_QUIET 	8
 #define TEST_SHOW_PROG 	4
 #define TEST_SHOW_ERR 	2
-#define TEST_SHOW_ALL		1
+#define TEST_SHOW_ALL	1
 
 #define TESTPAT1 0xAA55AA55
 #define TESTPAT2 0x55AA55AA
@@ -468,7 +470,6 @@
 
 void mem_test_reloc(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned long addr;
 	int i;
 	for (i=0; i< TEST_STAGES; i++) {
diff --git a/board/mpl/common/pci.c b/board/mpl/common/pci.c
index 692930b..bde14be 100644
--- a/board/mpl/common/pci.c
+++ b/board/mpl/common/pci.c
@@ -32,7 +32,7 @@
 #ifdef CONFIG_405GP
 #ifdef CONFIG_PCI
 
-#undef DEBUG
+DECLARE_GLOBAL_DATA_PTR;
 
 #include "piix4_pci.h"
 #include "pci_parts.h"
@@ -94,7 +94,6 @@
 
 static void reloc_pci_cfg_table(struct pci_config_table *table)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned long addr;
 
 	for (; table && table->vendor; table++) {
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 9c469b0..34f3289 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -70,6 +70,9 @@
 #include "../common/common_util.h"
 #include <i2c.h>
 #include <rtc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
 extern block_dev_desc_t * scsi_get_dev(int dev);
 extern block_dev_desc_t * ide_get_dev(int dev);
 
@@ -189,8 +192,6 @@
 void SDRAM_err (const char *s)
 {
 #ifndef SDRAM_DEBUG
-	DECLARE_GLOBAL_DATA_PTR;
-
 	(void) get_clocks ();
 	gd->baudrate = 9600;
 	serial_init ();
@@ -241,8 +242,6 @@
 
 int init_sdram (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long	tmp, baseaddr;
 	unsigned short	i;
 	unsigned char	trp_clocks,
@@ -681,7 +680,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	/* adjust flash start and size as well as the offset */
 	gd->bd->bi_flashstart=0-flash_info[0].size;
 	gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index a398362..3828608 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -31,6 +31,8 @@
 #include "../common/isa.h"
 #include "../common/common_util.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef SDRAM_DEBUG
 
 #define FALSE           0
@@ -134,8 +136,6 @@
 void SDRAM_err (const char *s)
 {
 #ifndef SDRAM_DEBUG
-	DECLARE_GLOBAL_DATA_PTR;
-
 	(void) get_clocks ();
 	gd->baudrate = 9600;
 	serial_init ();
@@ -191,9 +191,6 @@
 			trc_clocks, tctp_clocks;
 	unsigned char cal_index, cal_val, spd_version, spd_chksum;
 	unsigned char buf[8];
-#ifdef SDRAM_DEBUG
-	DECLARE_GLOBAL_DATA_PTR;
-#endif
 	/* set up the config port */
 	mtdcr (ebccfga, pb7ap);
 	mtdcr (ebccfgd, CONFIG_PORT_AP);
@@ -613,8 +610,6 @@
 
 long int initdram (int board_type)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long bank_reg[4], tmp, bank_size;
 	int i, ds;
 	unsigned long TotalSize;
@@ -666,7 +661,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	/* adjust flash start and size as well as the offset */
 	gd->bd->bi_flashstart=0-flash_info[0].size;
 	gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index ffdba5d..0d2003d 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -32,7 +32,7 @@
 #include "vcma9.h"
 #include "../common/common_util.h"
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
 
 #define FCLK_SPEED 1
 
@@ -71,7 +71,6 @@
 
 int board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
@@ -275,8 +274,6 @@
 
 int dram_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = Get_SDRAM_ChipSize() * Get_SDRAM_ChipNr();
 
diff --git a/board/mvblue/mvblue.c b/board/mvblue/mvblue.c
index 20a551d..ee8f3e3 100644
--- a/board/mvblue/mvblue.c
+++ b/board/mvblue/mvblue.c
@@ -14,6 +14,8 @@
 #include <pci.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 u32 get_BoardType (void);
 
 #define PCI_CONFIG(b,d,f,r)    cpu_to_le32(0x80000000 | ((b&0xff)<<16) \
@@ -50,7 +52,6 @@
 }
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong busfreq = get_bus_freq (0);
 	char buf[32];
 	u32 BoardType = get_BoardType ();
diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
index 5c33ba3..913f95c 100644
--- a/board/mx1ads/mx1ads.c
+++ b/board/mx1ads/mx1ads.c
@@ -27,7 +27,7 @@
 /*#include <mc9328.h>*/
 #include <asm/arch/imx-regs.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
 
 #define FCLK_SPEED 1
 
@@ -55,10 +55,11 @@
 
 #if 0
 
-static inline void delay (unsigned long loops) {
+static inline void delay (unsigned long loops)
+{
 	__asm__ volatile ("1:\n"
-	  "subs %0, %1, #1\n"
-	  "bne 1b":"=r" (loops):"0" (loops));
+			  "subs %0, %1, #1\n"
+			  "bne 1b":"=r" (loops):"0" (loops));
 }
 
 #endif
@@ -67,62 +68,58 @@
  * Miscellaneous platform dependent initialisations
  */
 
-void SetAsynchMode(void) {
-	__asm__ (
-		"mrc p15,0,r0,c1,c0,0 \n"
-		"mov r2, #0xC0000000 \n"
-		"orr r0,r2,r0 \n"
-		"mcr p15,0,r0,c1,c0,0 \n"
-	);
+void SetAsynchMode (void)
+{
+	__asm__ ("mrc p15,0,r0,c1,c0,0 \n"
+		 "mov r2, #0xC0000000 \n"
+		 "orr r0,r2,r0 \n" "mcr p15,0,r0,c1,c0,0 \n");
 }
 
 static u32 mc9328sid;
 
-int board_init (void) {
+int board_init (void)
+{
+	volatile unsigned int tmp;
 
-	DECLARE_GLOBAL_DATA_PTR;
+	mc9328sid = SIDR;
 
-	volatile unsigned int  tmp;
+	GPCR = 0x000003AB;	/* I/O pad driving strength     */
 
-	mc9328sid	= SIDR;
-
-	GPCR 		= 0x000003AB;		/* I/O pad driving strength 	*/
-
-/*	MX1_CS1U 	= 0x00000A00;	*/	/* SRAM initialization 		*/
+	/*	MX1_CS1U 	= 0x00000A00;	*//* SRAM initialization          */
 /*	MX1_CS1L 	= 0x11110601; 	*/
 
-	MPCTL0 		= 0x04632410;	/* setting for 150 MHz MCU PLL CLK	*/
+	MPCTL0 = 0x04632410;	/* setting for 150 MHz MCU PLL CLK      */
 
 /* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
  * BCLK divider to 2 (i.e. BCLK to 48 MHz)
  */
-	CSCR 	= 0xAF000403;
+	CSCR = 0xAF000403;
 
-	CSCR 	|= 0x00200000;   	/* Trigger the restart bit(bit 21)	*/
-	CSCR 	&= 0xFFFF7FFF;		/* Program PRESC bit(bit 15) to 0 to divide-by-1 */
+	CSCR |= 0x00200000;	/* Trigger the restart bit(bit 21)      */
+	CSCR &= 0xFFFF7FFF;	/* Program PRESC bit(bit 15) to 0 to divide-by-1 */
 
 /* setup cs4 for cs8900 ethernet */
 
-	CS4U	= 0x00000F00;	/* Initialize CS4 for CS8900 ethernet 	*/
-	CS4L	= 0x00001501;
+	CS4U = 0x00000F00;	/* Initialize CS4 for CS8900 ethernet   */
+	CS4L = 0x00001501;
 
-	GIUS(0)	&= 0xFF3FFFFF;
-	GPR(0)	&= 0xFF3FFFFF;
+	GIUS (0) &= 0xFF3FFFFF;
+	GPR (0) &= 0xFF3FFFFF;
 
-	tmp = *(unsigned int *)(0x1500000C);
-	tmp = *(unsigned int *)(0x1500000C);
+	tmp = *(unsigned int *) (0x1500000C);
+	tmp = *(unsigned int *) (0x1500000C);
 
-	SetAsynchMode();
+	SetAsynchMode ();
 
 	gd->bd->bi_arch_number = MACH_TYPE_MX1ADS;
 
-	gd->bd->bi_boot_params = 0x08000100;	/* adress of boot parameters	*/
+	gd->bd->bi_boot_params = 0x08000100;	/* adress of boot parameters    */
 
-	icache_enable();
-	dcache_enable();
+	icache_enable ();
+	dcache_enable ();
 
 /* set PERCLKs				*/
-	PCDR = 0x00000055;     	/* set PERCLKS				*/
+	PCDR = 0x00000055;	/* set PERCLKS                          */
 
 /* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes
  * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place
@@ -135,34 +132,38 @@
 	return 0;
 }
 
-int board_late_init(void) {
+int board_late_init (void)
+{
 
-	setenv("stdout", "serial");
-	setenv("stderr", "serial");
+	setenv ("stdout", "serial");
+	setenv ("stderr", "serial");
 
-	switch	(mc9328sid) {
-		case 0x0005901d :
-			printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",mc9328sid);
-			break;
-		case 0x04d4c01d :
-			printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",mc9328sid);
-			break;
-		case 0x00d4c01d :
-			printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",mc9328sid);
-			break;
+	switch (mc9328sid) {
+	case 0x0005901d:
+		printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",
+			mc9328sid);
+		break;
+	case 0x04d4c01d:
+		printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",
+			mc9328sid);
+		break;
+	case 0x00d4c01d:
+		printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",
+			mc9328sid);
+		break;
 
-		default :
-			printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid);
-			break;
+	default:
+		printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",
+			mc9328sid);
+		break;
 	}
 	return 0;
 }
 
-int dram_init (void) {
-	DECLARE_GLOBAL_DATA_PTR;
-
+int dram_init (void)
+{
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
 	return 0;
 }
diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c
index 9e7a06c..1c026f0 100644
--- a/board/mx1fs2/mx1fs2.c
+++ b/board/mx1fs2/mx1fs2.c
@@ -19,9 +19,10 @@
  */
 
 #include <common.h>
-
 #include <asm/arch/imx-regs.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
 
 extern void imx_gpio_mode(int gpio_mode);
@@ -79,8 +80,6 @@
 int
 board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_arch_number = MACH_TYPE_MX1FS2;
 	gd->bd->bi_boot_params = 0x08000100;
 serial_init();
@@ -91,8 +90,6 @@
 int
 dram_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 #if ( CONFIG_NR_DRAM_BANKS > 0 )
 	gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1;
 	gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE;
diff --git a/board/nc650/flash.c b/board/nc650/flash.c
index ce2f83b..8d7c172 100644
--- a/board/nc650/flash.c
+++ b/board/nc650/flash.c
@@ -32,6 +32,8 @@
 #include <common.h>
 #include <mpc8xx.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
 #define CFG_OR_TIMING_FLASH_AT_50MHZ (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				      OR_SCY_2_CLK | OR_EHTR | OR_BI)
@@ -95,8 +97,6 @@
 #ifdef CFG_OR_TIMING_FLASH_AT_50MHZ
 	int scy, trlx, flash_or_timing, clk_diff;
 
-	DECLARE_GLOBAL_DATA_PTR;
-
 	scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
 	if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
 		trlx = OR_TRLX;
diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c
index 62615e5..4b7eba1 100644
--- a/board/netstar/netstar.c
+++ b/board/netstar/netstar.c
@@ -22,10 +22,10 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of NetStar board */
 	/* TODO: use define from asm/mach-types.h */
 	gd->bd->bi_arch_number = 692;
@@ -38,8 +38,6 @@
 
 int dram_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/ns9750dev/ns9750dev.c b/board/ns9750dev/ns9750dev.c
index ea00d5a..1dd348a 100644
--- a/board/ns9750dev/ns9750dev.c
+++ b/board/ns9750dev/ns9750dev.c
@@ -41,6 +41,8 @@
 # include <./ns9750_bbus.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void flash__init( void );
 void ether__init( void );
 
@@ -60,8 +62,6 @@
 
 int board_init( void )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Active BBUS modules */
 	*get_bbus_reg_addr( NS9750_BBUS_MASTER_RESET ) = 0;
 
@@ -114,8 +114,6 @@
 ******************************/
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/nx823/nx823.c b/board/nx823/nx823.c
index 65d45c1..4a426ec 100644
--- a/board/nx823/nx823.c
+++ b/board/nx823/nx823.c
@@ -28,12 +28,10 @@
 #include <malloc.h>
 #include <mpc8xx.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
 
 static long int dram_size (long int, long int *, long int);
 
-/* ------------------------------------------------------------------------- */
-
 #define	_NOT_USED_	0xFFFFFFFF
 
 const uint sdram_table[] = {
@@ -366,8 +364,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char tmp[50];
 	u_char *e = gd->bd->bi_enetaddr;
 
@@ -387,8 +383,6 @@
 
 void load_sernum_ethaddr (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int i;
 	bd_t *bd = gd->bd;
 
diff --git a/board/omap1510inn/omap1510innovator.c b/board/omap1510inn/omap1510innovator.c
index f037f42..8941209 100644
--- a/board/omap1510inn/omap1510innovator.c
+++ b/board/omap1510inn/omap1510innovator.c
@@ -31,6 +31,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static void flash__init (void);
 static void ether__init (void);
 
@@ -47,8 +49,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of OMAP 1510-Board */
 	gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR;
 
@@ -122,8 +122,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/omap1610inn/omap1610innovator.c b/board/omap1610inn/omap1610innovator.c
index 7842518..8dbe686 100644
--- a/board/omap1610inn/omap1610innovator.c
+++ b/board/omap1610inn/omap1610innovator.c
@@ -36,6 +36,8 @@
 #include <./configs/omap1510.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_CS_AUTOBOOT
 unsigned long omap_flash_base;
 #endif
@@ -60,8 +62,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (machine_is_omap_h2())
 		gd->bd->bi_arch_number = MACH_TYPE_OMAP_H2;
 	else if (machine_is_omap_innovator())
@@ -153,8 +153,6 @@
 ******************************/
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c
index 2387176..f7f75e0 100644
--- a/board/omap2420h4/omap2420h4.c
+++ b/board/omap2420h4/omap2420h4.c
@@ -36,7 +36,9 @@
 extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
 #endif
 
- void wait_for_command_complete(unsigned int wd_base);
+DECLARE_GLOBAL_DATA_PTR;
+
+void wait_for_command_complete(unsigned int wd_base);
 
 /*******************************************************
  * Routine: delay
@@ -54,8 +56,6 @@
  *****************************************/
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gpmc_init(); /* in SRAM or SDRM, finish GPMC */
 
 	gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4;		/* board id for linux */
@@ -195,7 +195,6 @@
  **********************************************/
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int size0=0,size1=0;
 	u32 mtype, btype, rev, cpu;
 	u8 chg_on = 0x5; /* enable charge of back up battery */
diff --git a/board/omap5912osk/omap5912osk.c b/board/omap5912osk/omap5912osk.c
index 1faa084..e9e6b0e 100644
--- a/board/omap5912osk/omap5912osk.c
+++ b/board/omap5912osk/omap5912osk.c
@@ -38,6 +38,8 @@
 #include <./configs/omap1510.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void flash__init (void);
 void ether__init (void);
 void set_muxconf_regs (void);
@@ -58,8 +60,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_arch_number = MACH_TYPE_OMAP_OSK;
 
 	/* adress of boot parameters */
@@ -136,8 +136,6 @@
 ******************************/
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/omap730p2/omap730p2.c b/board/omap730p2/omap730p2.c
index 256c6a6..309d667 100644
--- a/board/omap730p2/omap730p2.c
+++ b/board/omap730p2/omap730p2.c
@@ -34,6 +34,8 @@
 #include <./configs/omap730.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int test_boot_mode(void);
 void spin_up_leds(void);
 void flash__init (void);
@@ -84,8 +86,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of OMAP 730 P2 Board - Same as the Innovator! */
 	gd->bd->bi_arch_number = MACH_TYPE_OMAP_PERSEUS2;
 
@@ -180,8 +180,6 @@
 ******************************/
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/oxc/oxc.c b/board/oxc/oxc.c
index fa7ff02..6cc3cc5 100644
--- a/board/oxc/oxc.c
+++ b/board/oxc/oxc.c
@@ -26,6 +26,8 @@
 #include <pci.h>
 #include <i2c.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int checkboard (void)
 {
 	puts (	"Board: OXC8240\n" );
@@ -184,8 +186,6 @@
 
 #ifdef CFG_OXC_GENERATE_IP
 	{
-		DECLARE_GLOBAL_DATA_PTR;
-
 		char str[32];
 		unsigned long ip = CFG_OXC_IPMASK;
 		bd_t *bd = gd->bd;
diff --git a/board/pcippc2/fpga_serial.c b/board/pcippc2/fpga_serial.c
index 579bfc7..5f89d9b 100644
--- a/board/pcippc2/fpga_serial.c
+++ b/board/pcippc2/fpga_serial.c
@@ -29,6 +29,8 @@
 #include "hardware.h"
 #include "pcippc2.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
   /* 8 data, 1 stop, no parity
    */
 #define LCRVAL		0x03
@@ -92,8 +94,6 @@
 
 void fpga_serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int clock_divisor = 115200 / gd->baudrate;
 
 	fpga_serial_wait ();
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c
index 231b505..a216c55 100644
--- a/board/pcippc2/pcippc2.c
+++ b/board/pcippc2/pcippc2.c
@@ -34,6 +34,8 @@
 #include "sconsole.h"
 #include "fpga_serial.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_WATCHDOG)
 
 static int pcippc2_wdt_init_done = 0;
@@ -108,8 +110,6 @@
 
 void after_reloc (ulong dest_addr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Jump to the main U-Boot board init code
 	 */
 	board_init_r ((gd_t *)gd, dest_addr);
diff --git a/board/pcippc2/sconsole.c b/board/pcippc2/sconsole.c
index a9f2b29..3b19069 100644
--- a/board/pcippc2/sconsole.c
+++ b/board/pcippc2/sconsole.c
@@ -26,6 +26,8 @@
 
 #include "sconsole.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void	(*sconsole_putc) (char) = 0;
 void	(*sconsole_puts) (const char *) = 0;
 int	(*sconsole_getc) (void) = 0;
@@ -34,8 +36,6 @@
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	sconsole_buffer_t *sb = SCONSOLE_BUFFER;
 
 	sb->pos  = 0;
@@ -104,8 +104,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (sconsole_setbrg) {
 		(*sconsole_setbrg) ();
 	} else {
diff --git a/board/pleb2/pleb2.c b/board/pleb2/pleb2.c
index ce9245c..dc6fac4 100644
--- a/board/pleb2/pleb2.c
+++ b/board/pleb2/pleb2.c
@@ -28,8 +28,7 @@
 #include <common.h>
 #include <asm-arm/mach-types.h>
 
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -37,8 +36,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -61,8 +58,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c
index d4cc5cb..65c5291 100644
--- a/board/pm520/pm520.c
+++ b/board/pm520/pm520.c
@@ -34,6 +34,8 @@
 #include "mt48lc16m16a2-75.h"
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifndef CFG_RAMBOOT
 static void sdram_start (int hi_addr)
 {
@@ -281,7 +283,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	/* adjust flash start */
 	gd->bd->bi_flashstart = flash_info[0].start[0];
 	return (0);
diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c
index 377aaa8..b2f348d 100644
--- a/board/pn62/pn62.c
+++ b/board/pn62/pn62.c
@@ -26,6 +26,7 @@
 
 #include "pn62.h"
 
+DECLARE_GLOBAL_DATA_PTR;
 
 static int get_serial_number (char *string, int size);
 static int get_mac_address (int id, u8 * mac, char *string, int size);
@@ -122,8 +123,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char str[20];
 	u8 mac[6];
 
diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c
index d42a643..2f28e9d 100644
--- a/board/prodrive/p3p440/p3p440.c
+++ b/board/prodrive/p3p440/p3p440.c
@@ -29,6 +29,8 @@
 
 #include "p3p440.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void set_led(int color)
 {
 	switch (color) {
@@ -141,8 +143,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*
 	 * Adjust flash start and offset to detected values
 	 */
@@ -206,8 +206,6 @@
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
index d5b993a..5765c55 100644
--- a/board/pxa255_idp/pxa_idp.c
+++ b/board/pxa255_idp/pxa_idp.c
@@ -33,8 +33,7 @@
 #include <common.h>
 #include <command.h>
 
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -42,8 +41,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -86,8 +83,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/quantum/quantum.c b/board/quantum/quantum.c
index 2861bc3..afa6e11 100644
--- a/board/quantum/quantum.c
+++ b/board/quantum/quantum.c
@@ -170,14 +170,14 @@
 	memctl->memc_mamr = mamr_value;
 
 	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
-		addr = base + cnt;	/* pointer arith! */
+		addr = (volatile ulong *)(base + cnt);	/* pointer arith! */
 
 		save[i++] = *addr;
 		*addr = ~cnt;
 	}
 
 	/* write 0 to base address */
-	addr = base;
+	addr = (volatile ulong *)base;
 	save[i] = *addr;
 	*addr = 0;
 
@@ -194,7 +194,7 @@
 	}
 
 	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
-		addr = base + cnt;	/* pointer arith! */
+		addr = (volatile ulong *)(base + cnt);	/* pointer arith! */
 
 		val = *addr;
 		*addr = save[--i];
diff --git a/board/rbc823/kbd.c b/board/rbc823/kbd.c
index c27929d..6d530f6 100644
--- a/board/rbc823/kbd.c
+++ b/board/rbc823/kbd.c
@@ -33,6 +33,8 @@
 #include <devices.h>
 #include <lcd.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define	SMC_INDEX	0
 #define PROFF_SMC	PROFF_SMC1
 #define CPM_CR_CH_SMC	CPM_CR_CH_SMC1
@@ -46,8 +48,6 @@
 
 void smc1_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *im = (immap_t *)CFG_IMMR;
 	volatile cpm8xx_t *cp = &(im->im_cpm);
 
diff --git a/board/sacsng/clkinit.c b/board/sacsng/clkinit.c
index ea4c65d..edb775d 100644
--- a/board/sacsng/clkinit.c
+++ b/board/sacsng/clkinit.c
@@ -30,6 +30,8 @@
 
 #include "clkinit.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int Daq64xSampling = 0;
 
 
@@ -257,7 +259,6 @@
 
 uint Daq_BRG_Rate(uint brg)
 {
-     DECLARE_GLOBAL_DATA_PTR;
      volatile immap_t *immr = (immap_t *)CFG_IMMR;
      uint *brg_ptr;
      uint brg_cnt;
@@ -295,7 +296,6 @@
 
 void Daq_Init_Clocks(int sample_rate, int sample_64x)
 {
-    DECLARE_GLOBAL_DATA_PTR;
     volatile ioport_t *iopa = ioport_addr((immap_t *)CFG_IMMR, 0 /* port A */);
     uint mclk_divisor; /* MCLK divisor */
     int  flag;         /* Interrupt state */
diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c
index 3530416..7816472 100644
--- a/board/sandburst/common/sb_common.c
+++ b/board/sandburst/common/sb_common.c
@@ -29,6 +29,8 @@
 #include "ppc440gx_i2c.h"
 #include "sb_common.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 long int fixed_sdram (void);
 
 /*************************************************************************
@@ -203,7 +205,7 @@
 	long dram_size = 0;
 
 #if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram (0);
+	dram_size = spd_sdram ();
 #else
 	dram_size = fixed_sdram ();
 #endif
@@ -341,8 +343,6 @@
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
diff --git a/board/sbc405/sbc405.c b/board/sbc405/sbc405.c
index cad5873..0ae6d0b 100644
--- a/board/sbc405/sbc405.c
+++ b/board/sbc405/sbc405.c
@@ -98,7 +98,7 @@
 
 long int initdram (int board_type)
 {
-	return  spd_sdram (0);
+	return  spd_sdram ();
 }
 
 /* ------------------------------------------------------------------------- */
diff --git a/board/sbc8240/sbc8240.c b/board/sbc8240/sbc8240.c
index a6d3bab..8a52f67 100644
--- a/board/sbc8240/sbc8240.c
+++ b/board/sbc8240/sbc8240.c
@@ -29,12 +29,12 @@
 #include <asm/processor.h>
 #include <pci.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define BOARD_REV_REG 0xFE80002B
 
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char  revision = *(volatile char *)(BOARD_REV_REG);
 	char  buf[32];
 
diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c
index cd52324..b6add59 100644
--- a/board/sc520_cdp/sc520_cdp.c
+++ b/board/sc520_cdp/sc520_cdp.c
@@ -30,6 +30,8 @@
 #include <asm/ic/ali512x.h>
 #include <spi.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef SC520_CDP_DEBUG
 
 #ifdef	SC520_CDP_DEBUG
@@ -481,8 +483,6 @@
 
 int board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	init_sc520();
 	bus_init();
 	irq_init();
diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c
index e7a7d51..ed226fd 100644
--- a/board/sc520_spunk/sc520_spunk.c
+++ b/board/sc520_spunk/sc520_spunk.c
@@ -29,9 +29,7 @@
 #include <asm/pci.h>
 #include <asm/ic/sc520.h>
 
-
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Theory:
@@ -483,8 +481,6 @@
 
 int board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	init_sc520();
 	bus_init();
 	irq_init();
diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c
index 3ed8753..3f6831b 100644
--- a/board/scb9328/scb9328.c
+++ b/board/scb9328/scb9328.c
@@ -20,42 +20,41 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_SHOW_BOOT_PROGRESS
 # define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
 #else
 # define SHOW_BOOT_PROGRESS(arg)
 #endif
 
-int board_init( void ){
-  DECLARE_GLOBAL_DATA_PTR;
+int board_init (void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_SCB9328;
+	gd->bd->bi_boot_params = 0x08000100;
 
-  gd->bd->bi_arch_number = MACH_TYPE_SCB9328;
-  gd->bd->bi_boot_params = 0x08000100;
-
-  return 0;
+	return 0;
 }
 
-int dram_init( void ){
-  DECLARE_GLOBAL_DATA_PTR;
-
+int dram_init (void)
+{
 #if ( CONFIG_NR_DRAM_BANKS > 0 )
-  gd->bd->bi_dram[0].start = SCB9328_SDRAM_1;
-  gd->bd->bi_dram[0].size  = SCB9328_SDRAM_1_SIZE;
+	gd->bd->bi_dram[0].start = SCB9328_SDRAM_1;
+	gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE;
 #endif
 #if ( CONFIG_NR_DRAM_BANKS > 1 )
-  gd->bd->bi_dram[1].start = SCB9328_SDRAM_2;
-  gd->bd->bi_dram[1].size  = SCB9328_SDRAM_2_SIZE;
+	gd->bd->bi_dram[1].start = SCB9328_SDRAM_2;
+	gd->bd->bi_dram[1].size = SCB9328_SDRAM_2_SIZE;
 #endif
 #if ( CONFIG_NR_DRAM_BANKS > 2 )
-  gd->bd->bi_dram[2].start = SCB9328_SDRAM_3;
-  gd->bd->bi_dram[2].size  = SCB9328_SDRAM_3_SIZE;
+	gd->bd->bi_dram[2].start = SCB9328_SDRAM_3;
+	gd->bd->bi_dram[2].size = SCB9328_SDRAM_3_SIZE;
 #endif
 #if ( CONFIG_NR_DRAM_BANKS > 3 )
-  gd->bd->bi_dram[3].start = SCB9328_SDRAM_4;
-  gd->bd->bi_dram[3].size  = SCB9328_SDRAM_4_SIZE;
+	gd->bd->bi_dram[3].start = SCB9328_SDRAM_4;
+	gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE;
 #endif
-
-  return 0;
+	return 0;
 }
 
 /**
diff --git a/board/shannon/shannon.c b/board/shannon/shannon.c
index 0d9f146..8cd1fc3 100644
--- a/board/shannon/shannon.c
+++ b/board/shannon/shannon.c
@@ -24,8 +24,7 @@
 
 #include <common.h>
 
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -33,8 +32,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* but if we use InfernoLoader, we must do some inits here */
 
@@ -75,7 +72,6 @@
 {
 #if defined(PHYS_SDRAM_1) || defined(PHYS_SDRAM_2) || \
     defined(PHYS_SDRAM_3) || defined(PHYS_SDRAM_4)
-	DECLARE_GLOBAL_DATA_PTR;
 	bd_t *bd = gd->bd;
 #endif
 
diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c
index d20688d..8783aaf 100644
--- a/board/siemens/SCM/scm.c
+++ b/board/siemens/SCM/scm.c
@@ -27,6 +27,8 @@
 
 #include "scm.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static void config_scoh_cs(void);
 extern int  fpga_init(void);
 
@@ -300,8 +302,6 @@
  */
 int power_on_reset (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Test Reset Status Register */
 	return gd->reset_status & RSR_CSRS ? 0 : 1;
 }
diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c
index a25dffd..a4cb4dc 100644
--- a/board/sixnet/sixnet.c
+++ b/board/sixnet/sixnet.c
@@ -38,6 +38,8 @@
 extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define ORMASK(size) ((-size) & OR_AM_MSK)
 
 static long ram_size(ulong *, long);
@@ -256,8 +258,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	char* s;
diff --git a/board/smdk2400/smdk2400.c b/board/smdk2400/smdk2400.c
index cb70218..4d1f1a6 100644
--- a/board/smdk2400/smdk2400.c
+++ b/board/smdk2400/smdk2400.c
@@ -28,7 +28,7 @@
 #include <common.h>
 #include <s3c2400.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_MODEM_SUPPORT
 static int key_pressed(void);
@@ -45,7 +45,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
@@ -94,8 +93,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/smdk2410/smdk2410.c b/board/smdk2410/smdk2410.c
index 9623aef..802348d 100644
--- a/board/smdk2410/smdk2410.c
+++ b/board/smdk2410/smdk2410.c
@@ -28,7 +28,7 @@
 #include <common.h>
 #include <s3c2410.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
 
 #define FCLK_SPEED 1
 
@@ -67,7 +67,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
@@ -117,8 +116,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/stamp/stamp.c b/board/stamp/stamp.c
index 3fe0134..7e3af20 100644
--- a/board/stamp/stamp.c
+++ b/board/stamp/stamp.c
@@ -29,6 +29,8 @@
 #include <asm/mem_init.h>
 #include "stamp.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define STATUS_LED_OFF 0
 #define STATUS_LED_ON  1
 
@@ -49,7 +51,6 @@
 
 long int initdram (int board_type)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
 	printf ("SDRAM attributes:\n");
 	printf ("  tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "
diff --git a/board/sx1/sx1.c b/board/sx1/sx1.c
index e45f6ae..aaef76e 100644
--- a/board/sx1/sx1.c
+++ b/board/sx1/sx1.c
@@ -27,6 +27,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static void flash__init (void);
 static void ether__init (void);
 
@@ -43,8 +45,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of SX1 Board */
 	gd->bd->bi_arch_number = MACH_TYPE_SX1;
 
@@ -116,8 +116,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c
index dada673..b5c12e3 100644
--- a/board/tqm834x/tqm834x.c
+++ b/board/tqm834x/tqm834x.c
@@ -32,6 +32,8 @@
 #include <asm-ppc/mmu.h>
 #include <pci.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define IOSYNC			asm("eieio")
 #define ISYNC			asm("isync")
 #define SYNC			asm("sync")
@@ -142,7 +144,6 @@
 	puts("Board: TQM834x\n");
 
 #ifdef CONFIG_PCI
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t * immr;
 	u32 w, f;
 
diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c
index c03b60d..69b9101 100644
--- a/board/tqm85xx/tqm85xx.c
+++ b/board/tqm85xx/tqm85xx.c
@@ -36,6 +36,8 @@
 #include <spd.h>
 #include <flash.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern flash_info_t flash_info[];	/* FLASH chips info */
 
 void local_bus_init (void);
@@ -257,7 +259,6 @@
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
 
diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c
index 97bb5c3..ab57ee5 100644
--- a/board/tqm8xx/flash.c
+++ b/board/tqm8xx/flash.c
@@ -31,6 +31,8 @@
 
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
 # ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
 #  define CFG_OR_TIMING_FLASH_AT_50MHZ	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
@@ -63,8 +65,6 @@
 #ifdef	CFG_OR_TIMING_FLASH_AT_50MHZ
 	int scy, trlx, flash_or_timing, clk_diff;
 
-	DECLARE_GLOBAL_DATA_PTR;
-
 	scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
 	if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
 		trlx = OR_TRLX;
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c
index 017bdf9..520bea8 100644
--- a/board/tqm8xx/tqm8xx.c
+++ b/board/tqm8xx/tqm8xx.c
@@ -31,12 +31,10 @@
 #include <ps2mult.h>
 #endif
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
 
 static long int dram_size (long int, long int *, long int);
 
-/* ------------------------------------------------------------------------- */
-
 #define	_NOT_USED_	0xFFFFFFFF
 
 const uint sdram_table[] =
@@ -104,8 +102,6 @@
 
 int checkboard (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char *s = getenv ("serial#");
 
 	puts ("Board: ");
diff --git a/board/trab/memory.c b/board/trab/memory.c
index 9104413..4097892 100644
--- a/board/trab/memory.c
+++ b/board/trab/memory.c
@@ -454,10 +454,11 @@
 }
 
 #if 0
+DECLARE_GLOBAL_DATA_PTR;
+
 int memory_post_test (int flags)
 {
 	int ret = 0;
-	DECLARE_GLOBAL_DATA_PTR;
 	bd_t *bd = gd->bd;
 	unsigned long memsize = (bd->bi_memsize >= 256 << 20 ?
 				 256 << 20 : bd->bi_memsize) - (1 << 20);
diff --git a/board/trab/trab.c b/board/trab/trab.c
index e8dfd2c..868a899 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -28,7 +28,7 @@
 #include <s3c2400.h>
 #include <command.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CFG_BRIGHTNESS
 static void spi_init(void);
@@ -52,8 +52,6 @@
 #define KBD_MDELAY	5000
 static void udelay_no_timer (int usec)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int i;
 	int delay = usec * 3;
 
@@ -70,7 +68,6 @@
 #if defined(CONFIG_VFD)
 	extern int vfd_init_clocks(void);
 #endif
-	DECLARE_GLOBAL_DATA_PTR;
 	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
@@ -141,8 +138,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	return 0;
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index f510ee5..cea8b0b 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -39,6 +39,8 @@
 #include <devices.h>
 #include <s3c2400.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_VFD
 
 /************************************************************************/
@@ -86,7 +88,6 @@
  */
 void init_grid_ctrl(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong adr, grid_cycle;
 	unsigned int bit, display;
 	unsigned char temp, bit_nr;
@@ -172,7 +173,6 @@
  */
 void create_vfd_table(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned long vfd_table[112][18][2][4][2];
 	unsigned int x, y, color, display, entry, pixel;
 	unsigned int x_abcdef = 0;
@@ -280,7 +280,6 @@
 		   unsigned char color, unsigned char display,
 		   unsigned char value)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong adr;
 	unsigned char bit_nr, temp;
 
@@ -435,8 +434,6 @@
 	static int vfd_init_done = 0;
 	int vfd_inv_data = 0;
 
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (vfd_init_done != 0)
 		return (0);
 	vfd_init_done = 1;
diff --git a/board/versatile/versatile.c b/board/versatile/versatile.c
index 0274027..9d1a25e 100644
--- a/board/versatile/versatile.c
+++ b/board/versatile/versatile.c
@@ -35,6 +35,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void flash__init (void);
 void ether__init (void);
 void peripheral_power_enable (void);
@@ -61,9 +63,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
-
 	/*
 	 * set clock frequency:
 	 *	VERSATILE_REFCLK is 32KHz
diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c
index 7a2d243..04093d1 100644
--- a/board/voiceblue/voiceblue.c
+++ b/board/voiceblue/voiceblue.c
@@ -21,10 +21,10 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	*((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa;
 
 	/* arch number of VoiceBlue board */
@@ -39,8 +39,6 @@
 
 int dram_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	*((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff;
 
  	/* Take the Ethernet controller out of reset and wait
diff --git a/board/wepep250/wepep250.c b/board/wepep250/wepep250.c
index 56cb855..fe4b6a9 100644
--- a/board/wepep250/wepep250.c
+++ b/board/wepep250/wepep250.c
@@ -23,45 +23,45 @@
 #include <common.h>
 #include <asm/arch/pxa-regs.h>
 
-int board_init( void ){
-  DECLARE_GLOBAL_DATA_PTR;
+DECLARE_GLOBAL_DATA_PTR;
 
-  gd->bd->bi_arch_number = MACH_TYPE_WEP_EP250;
-  gd->bd->bi_boot_params = 0xa0000000;
+int board_init (void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_WEP_EP250;
+	gd->bd->bi_boot_params = 0xa0000000;
 /*
  * Setup GPIO stuff to get serial working
  */
 #if defined( CONFIG_FFUART )
-  GPDR1   = 0x80;
-  GAFR1_L = 0x8010;
+	GPDR1 = 0x80;
+	GAFR1_L = 0x8010;
 #elif defined( CONFIG_BTUART )
-  GPDR1   = 0x800;
-  GAFR1_L = 0x900000;
+	GPDR1 = 0x800;
+	GAFR1_L = 0x900000;
 #endif
-  PSSR    = 0x20;
+	PSSR = 0x20;
 
-  return 0;
+	return 0;
 }
 
-int dram_init( void ){
-  DECLARE_GLOBAL_DATA_PTR;
-
+int dram_init (void)
+{
 #if ( CONFIG_NR_DRAM_BANKS > 0 )
-  gd->bd->bi_dram[0].start = WEP_SDRAM_1;
-  gd->bd->bi_dram[0].size  = WEP_SDRAM_1_SIZE;
+	gd->bd->bi_dram[0].start = WEP_SDRAM_1;
+	gd->bd->bi_dram[0].size = WEP_SDRAM_1_SIZE;
 #endif
 #if ( CONFIG_NR_DRAM_BANKS > 1 )
-  gd->bd->bi_dram[1].start = WEP_SDRAM_2;
-  gd->bd->bi_dram[1].size  = WEP_SDRAM_2_SIZE;
+	gd->bd->bi_dram[1].start = WEP_SDRAM_2;
+	gd->bd->bi_dram[1].size = WEP_SDRAM_2_SIZE;
 #endif
 #if ( CONFIG_NR_DRAM_BANKS > 2 )
-  gd->bd->bi_dram[2].start = WEP_SDRAM_3;
-  gd->bd->bi_dram[2].size  = WEP_SDRAM_3_SIZE;
+	gd->bd->bi_dram[2].start = WEP_SDRAM_3;
+	gd->bd->bi_dram[2].size = WEP_SDRAM_3_SIZE;
 #endif
 #if ( CONFIG_NR_DRAM_BANKS > 3 )
-  gd->bd->bi_dram[3].start = WEP_SDRAM_4;
-  gd->bd->bi_dram[3].size  = WEP_SDRAM_4_SIZE;
+	gd->bd->bi_dram[3].start = WEP_SDRAM_4;
+	gd->bd->bi_dram[3].size = WEP_SDRAM_4_SIZE;
 #endif
 
-  return 0;
+	return 0;
 }
diff --git a/board/xaeniax/xaeniax.c b/board/xaeniax/xaeniax.c
index 26fb312..9baa457 100644
--- a/board/xaeniax/xaeniax.c
+++ b/board/xaeniax/xaeniax.c
@@ -30,8 +30,7 @@
 
 #include <common.h>
 
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -39,8 +38,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -63,8 +60,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	/*	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;*/
diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c
index 19bcc6f..c204b88 100644
--- a/board/xilinx/ml300/serial.c
+++ b/board/xilinx/ml300/serial.c
@@ -43,6 +43,8 @@
 #include <configs/ml300.h>
 #include "xparameters.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define USE_CHAN1 \
 	((defined XPAR_UARTNS550_0_BASEADDR) && (defined CFG_INIT_CHAN1))
 #define USE_CHAN2 \
@@ -64,7 +66,6 @@
 serial_init(void)
 {
 #if USE_CHAN1
-	DECLARE_GLOBAL_DATA_PTR;
 	int clock_divisor;
 
 	clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
@@ -103,7 +104,6 @@
 serial_setbrg(void)
 {
 #if USE_CHAN1
-	DECLARE_GLOBAL_DATA_PTR;
 	int clock_divisor;
 
 	clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
diff --git a/board/xm250/xm250.c b/board/xm250/xm250.c
index ef5e9da..528d323 100644
--- a/board/xm250/xm250.c
+++ b/board/xm250/xm250.c
@@ -28,6 +28,8 @@
 #include <asm/arch/pxa-regs.h>
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 /* local prototypes */
@@ -61,7 +63,6 @@
 board_init (void)
 /**********************************************************/
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	/* arch number of MicroSys XM250 */
 	gd->bd->bi_arch_number = MACH_TYPE_XM250;
 
@@ -76,8 +77,6 @@
 dram_init (void)
 /**********************************************************/
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c
index bb36c96..a569b53 100644
--- a/board/xpedite1k/xpedite1k.c
+++ b/board/xpedite1k/xpedite1k.c
@@ -26,6 +26,8 @@
 #include <spd_sdram.h>
 #include <i2c.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define BOOT_SMALL_FLASH	32	/* 00100000 */
 #define FLASH_ONBD_N		2	/* 00000010 */
 #define FLASH_SRAM_SEL		1	/* 00000001 */
@@ -107,7 +109,7 @@
 	long dram_size = 0;
 
 #if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram (0);
+	dram_size = spd_sdram ();
 #else
 	dram_size = fixed_sdram ();
 #endif
@@ -238,8 +240,6 @@
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
diff --git a/board/xsengine/xsengine.c b/board/xsengine/xsengine.c
index a9919db..23d56c4 100644
--- a/board/xsengine/xsengine.c
+++ b/board/xsengine/xsengine.c
@@ -27,14 +27,14 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Miscelaneous platform dependent initialisations
  */
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -56,8 +56,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 
diff --git a/board/zylonite/zylonite.c b/board/zylonite/zylonite.c
index e618ab9..5829170 100644
--- a/board/zylonite/zylonite.c
+++ b/board/zylonite/zylonite.c
@@ -27,8 +27,7 @@
 
 #include <common.h>
 
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -36,8 +35,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -60,8 +57,6 @@
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 40e28dd..04fa4fa 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -28,6 +28,7 @@
 #include <command.h>
 #include <net.h>		/* for print_IPaddr */
 
+DECLARE_GLOBAL_DATA_PTR;
 
 #if (CONFIG_COMMANDS & CFG_CMD_BDI)
 static void print_num(const char *, ulong);
@@ -39,8 +40,6 @@
 
 int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int i;
 	bd_t *bd = gd->bd;
 	char buf[32];
@@ -127,8 +126,6 @@
 
 int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int i;
 	bd_t *bd = gd->bd;
 
@@ -153,8 +150,6 @@
 
 int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int i;
 	bd_t *bd = gd->bd;
 
@@ -187,8 +182,6 @@
 
 int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int i;
 	bd_t *bd = gd->bd;
 
@@ -215,8 +208,6 @@
 
 int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int i;
 	bd_t *bd = gd->bd;
 
diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c
index cdb379d..48086a6 100644
--- a/common/cmd_bedbug.c
+++ b/common/cmd_bedbug.c
@@ -11,187 +11,183 @@
 #include <bedbug/regs.h>
 #include <bedbug/ppc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
 
 #ifndef MAX
 #define MAX(a,b) ((a) > (b) ? (a) : (b))
 #endif
 
-extern void show_regs __P((struct pt_regs*));
-extern int  run_command __P((const char*, int));
+extern void show_regs __P ((struct pt_regs *));
+extern int run_command __P ((const char *, int));
 extern char console_buffer[];
 
-ulong	      dis_last_addr = 0;        /* Last address disassembled   */
-ulong	      dis_last_len = 20;        /* Default disassembler length */
-CPU_DEBUG_CTX bug_ctx;                  /* Bedbug context structure    */
-
+ulong dis_last_addr = 0;	/* Last address disassembled   */
+ulong dis_last_len = 20;	/* Default disassembler length */
+CPU_DEBUG_CTX bug_ctx;		/* Bedbug context structure    */
 
+
 /* ======================================================================
  * U-Boot's puts function does not append a newline, so the bedbug stuff
  * will use this for the output of the dis/assembler.
  * ====================================================================== */
 
-int bedbug_puts(const char *str)
+int bedbug_puts (const char *str)
 {
-  /* -------------------------------------------------- */
+	/* -------------------------------------------------- */
 
-  printf( "%s\r\n", str );
-  return 0;
-} /* bedbug_puts */
-
-
+	printf ("%s\r\n", str);
+	return 0;
+}				/* bedbug_puts */
 
+
+
 /* ======================================================================
  * Initialize the bug_ctx structure used by the bedbug debugger.  This is
  * specific to the CPU since each has different debug registers and
  * settings.
  * ====================================================================== */
 
-void bedbug_init( void )
+void bedbug_init (void)
 {
-  /* -------------------------------------------------- */
+	/* -------------------------------------------------- */
 
 #if defined(CONFIG_4xx)
-  void bedbug405_init( void );
-  bedbug405_init();
+	void bedbug405_init (void);
+
+	bedbug405_init ();
 #elif defined(CONFIG_8xx)
-  void bedbug860_init( void );
-  bedbug860_init();
+	void bedbug860_init (void);
+
+	bedbug860_init ();
 #endif
 
 #if defined(CONFIG_MPC824X) || defined(CONFIG_MPC8260)
-  /* Processors that are 603e core based */
-  void bedbug603e_init( void );
+	/* Processors that are 603e core based */
+	void bedbug603e_init (void);
 
-  bedbug603e_init();
+	bedbug603e_init ();
 #endif
 
-  return;
-} /* bedbug_init */
-
-
+	return;
+}				/* bedbug_init */
 
+
+
 /* ======================================================================
  * Entry point from the interpreter to the disassembler.  Repeated calls
  * will resume from the last disassembled address.
  * ====================================================================== */
-int do_bedbug_dis (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-  ulong	addr;   /* Address to start disassembly from    */
-  ulong	len;    /* # of instructions to disassemble     */
-  /* -------------------------------------------------- */
+	ulong addr;		/* Address to start disassembly from    */
+	ulong len;		/* # of instructions to disassemble     */
 
-  /* Setup to go from the last address if none is given */
-  addr = dis_last_addr;
-  len  = dis_last_len;
+	/* -------------------------------------------------- */
 
-  if (argc < 2)
-  {
-    printf ("Usage:\n%s\n", cmdtp->usage);
-    return 1;
-  }
+	/* Setup to go from the last address if none is given */
+	addr = dis_last_addr;
+	len = dis_last_len;
 
-  if(( flag & CMD_FLAG_REPEAT ) == 0 )
-  {
-    /* New command */
-    addr = simple_strtoul( argv[1], NULL, 16 );
+	if (argc < 2) {
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
 
-    /* If an extra param is given then it is the length */
-    if( argc > 2 )
-      len = simple_strtoul( argv[2], NULL, 16 );
-  }
+	if ((flag & CMD_FLAG_REPEAT) == 0) {
+		/* New command */
+		addr = simple_strtoul (argv[1], NULL, 16);
 
-  /* Run the disassembler */
-  disppc( (unsigned char *)addr, 0, len, bedbug_puts, F_RADHEX );
+		/* If an extra param is given then it is the length */
+		if (argc > 2)
+			len = simple_strtoul (argv[2], NULL, 16);
+	}
 
-  dis_last_addr = addr + (len * 4);
-  dis_last_len = len;
-  return 0;
-} /* do_bedbug_dis */
-U_BOOT_CMD(
-	ds,      3,      1,      do_bedbug_dis,
-	"ds      - disassemble memory\n",
-	"ds <address> [# instructions]\n"
-);
+	/* Run the disassembler */
+	disppc ((unsigned char *) addr, 0, len, bedbug_puts, F_RADHEX);
+
+	dis_last_addr = addr + (len * 4);
+	dis_last_len = len;
+	return 0;
+}				/* do_bedbug_dis */
+
+U_BOOT_CMD (ds, 3, 1, do_bedbug_dis,
+	    "ds      - disassemble memory\n",
+	    "ds <address> [# instructions]\n");
 
 /* ======================================================================
  * Entry point from the interpreter to the assembler.  Assembles
  * instructions in consecutive memory locations until a '.' (period) is
  * entered on a line by itself.
  * ====================================================================== */
-int do_bedbug_asm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-  long		mem_addr;               /* Address to assemble into     */
-  unsigned long instr;                  /* Machine code for text        */
-  char		prompt[ 15 ];           /* Prompt string for user input */
-  int		asm_err;                /* Error code from the assembler*/
-  /* -------------------------------------------------- */
-   int          rcode = 0;
+	long mem_addr;		/* Address to assemble into     */
+	unsigned long instr;	/* Machine code for text        */
+	char prompt[15];	/* Prompt string for user input */
+	int asm_err;		/* Error code from the assembler */
 
-  if (argc < 2)
-  {
-    printf ("Usage:\n%s\n", cmdtp->usage);
-    return 1;
-  }
+	/* -------------------------------------------------- */
+	int rcode = 0;
 
-  printf( "\nEnter '.' when done\n" );
-  mem_addr = simple_strtoul( argv[ 1 ], NULL, 16 );
+	if (argc < 2) {
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
 
-  while( 1 )
-  {
-    putc( '\n' );
-    disppc( (unsigned char *)mem_addr, 0, 1, bedbug_puts, F_RADHEX );
+	printf ("\nEnter '.' when done\n");
+	mem_addr = simple_strtoul (argv[1], NULL, 16);
 
-    sprintf( prompt, "%08lx:    ", mem_addr );
-    readline( prompt );
+	while (1) {
+		putc ('\n');
+		disppc ((unsigned char *) mem_addr, 0, 1, bedbug_puts,
+			F_RADHEX);
 
-    if( console_buffer[ 0 ] && strcmp( console_buffer, "." ))
-    {
-      if(( instr = asmppc( mem_addr, console_buffer, &asm_err )) != 0 )
-      {
-	*(unsigned long *)mem_addr = instr;
-	mem_addr += 4;
-      }
-      else
-      {
-	printf( "*** Error: %s ***\n", asm_error_str( asm_err ));
-	rcode = 1;
-      }
-    }
-    else
-    {
-      break;
-    }
-  }
-  return rcode;
-} /* do_bedbug_asm */
-U_BOOT_CMD(
-	as,      2,      0,      do_bedbug_asm,
-	"as      - assemble memory\n",
-	"as <address>\n"
-);
+		sprintf (prompt, "%08lx:    ", mem_addr);
+		readline (prompt);
+
+		if (console_buffer[0] && strcmp (console_buffer, ".")) {
+			if ((instr =
+			     asmppc (mem_addr, console_buffer,
+				     &asm_err)) != 0) {
+				*(unsigned long *) mem_addr = instr;
+				mem_addr += 4;
+			} else {
+				printf ("*** Error: %s ***\n",
+					asm_error_str (asm_err));
+				rcode = 1;
+			}
+		} else {
+			break;
+		}
+	}
+	return rcode;
+}				/* do_bedbug_asm */
+
+U_BOOT_CMD (as, 2, 0, do_bedbug_asm,
+	    "as      - assemble memory\n", "as <address>\n");
 
 /* ======================================================================
  * Used to set a break point from the interpreter.  Simply calls into the
  * CPU-specific break point set routine.
  * ====================================================================== */
 
-int do_bedbug_break (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-  /* -------------------------------------------------- */
-  if( bug_ctx.do_break )
-    (*bug_ctx.do_break)( cmdtp, flag, argc, argv );
-    return 0;
+	/* -------------------------------------------------- */
+	if (bug_ctx.do_break)
+		(*bug_ctx.do_break) (cmdtp, flag, argc, argv);
+	return 0;
 
-} /* do_bedbug_break */
-U_BOOT_CMD(
-	break,      3,      0,      do_bedbug_break,
-	"break   - set or clear a breakpoint\n",
-	" - Set or clear a breakpoint\n"
-	"break <address> - Break at an address\n"
-	"break off <bp#> - Disable breakpoint.\n"
-	"break show      - List breakpoints.\n"
-);
+}				/* do_bedbug_break */
+
+U_BOOT_CMD (break, 3, 0, do_bedbug_break,
+	    "break   - set or clear a breakpoint\n",
+	    " - Set or clear a breakpoint\n"
+	    "break <address> - Break at an address\n"
+	    "break off <bp#> - Disable breakpoint.\n"
+	    "break show      - List breakpoints.\n");
 
 /* ======================================================================
  * Called from the debug interrupt routine.  Simply calls the CPU-specific
@@ -200,16 +196,16 @@
 
 void do_bedbug_breakpoint (struct pt_regs *regs)
 {
-  /* -------------------------------------------------- */
+	/* -------------------------------------------------- */
 
-  if( bug_ctx.break_isr )
-    (*bug_ctx.break_isr)( regs );
+	if (bug_ctx.break_isr)
+		(*bug_ctx.break_isr) (regs);
 
-  return;
-} /* do_bedbug_breakpoint */
-
-
+	return;
+}				/* do_bedbug_breakpoint */
 
+
+
 /* ======================================================================
  * Called from the CPU-specific breakpoint handling routine.  Enter a
  * mini main loop until the stopped flag is cleared from the breakpoint
@@ -218,81 +214,77 @@
  * This handles the parts of the debugger that are common to all CPU's.
  * ====================================================================== */
 
-void bedbug_main_loop( unsigned long addr, struct pt_regs *regs )
+void bedbug_main_loop (unsigned long addr, struct pt_regs *regs)
 {
-  int		len;                    /* Length of command line */
-  int           flag;                   /* Command flags          */
-  int           rc = 0;                 /* Result from run_command*/
-  char          prompt_str[ 20 ];       /* Prompt string          */
-  static char   lastcommand[ CFG_CBSIZE ] = {0}; /* previous command */
-  /* -------------------------------------------------- */
+	int len;		/* Length of command line */
+	int flag;		/* Command flags          */
+	int rc = 0;		/* Result from run_command */
+	char prompt_str[20];	/* Prompt string          */
+	static char lastcommand[CFG_CBSIZE] = { 0 };	/* previous command */
+	/* -------------------------------------------------- */
 
-  if( bug_ctx.clear )
-    (*bug_ctx.clear)( bug_ctx.current_bp );
+	if (bug_ctx.clear)
+		(*bug_ctx.clear) (bug_ctx.current_bp);
 
-  printf( "Breakpoint %d: ", bug_ctx.current_bp );
-  disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
+	printf ("Breakpoint %d: ", bug_ctx.current_bp);
+	disppc ((unsigned char *) addr, 0, 1, bedbug_puts, F_RADHEX);
 
-  bug_ctx.stopped = 1;
-  bug_ctx.regs = regs;
+	bug_ctx.stopped = 1;
+	bug_ctx.regs = regs;
 
-  sprintf( prompt_str, "BEDBUG.%d =>", bug_ctx.current_bp );
+	sprintf (prompt_str, "BEDBUG.%d =>", bug_ctx.current_bp);
 
-  /* A miniature main loop */
-  while( bug_ctx.stopped )
-  {
-    len = readline( prompt_str );
+	/* A miniature main loop */
+	while (bug_ctx.stopped) {
+		len = readline (prompt_str);
 
-    flag = 0;	/* assume no special flags for now */
+		flag = 0;	/* assume no special flags for now */
 
-    if (len > 0)
-      strcpy( lastcommand, console_buffer );
-    else if( len == 0 )
-      flag |= CMD_FLAG_REPEAT;
+		if (len > 0)
+			strcpy (lastcommand, console_buffer);
+		else if (len == 0)
+			flag |= CMD_FLAG_REPEAT;
 
-    if (len == -1)
-      printf ("<INTERRUPT>\n");
-    else
-      rc = run_command( lastcommand, flag );
+		if (len == -1)
+			printf ("<INTERRUPT>\n");
+		else
+			rc = run_command (lastcommand, flag);
 
-    if (rc <= 0) {
-      /* invalid command or not repeatable, forget it */
-      lastcommand[0] = 0;
-    }
-  }
+		if (rc <= 0) {
+			/* invalid command or not repeatable, forget it */
+			lastcommand[0] = 0;
+		}
+	}
 
-  bug_ctx.regs = NULL;
-  bug_ctx.current_bp = 0;
+	bug_ctx.regs = NULL;
+	bug_ctx.current_bp = 0;
 
-  return;
-} /* bedbug_main_loop */
-
-
+	return;
+}				/* bedbug_main_loop */
 
+
+
 /* ======================================================================
  * Interpreter command to continue from a breakpoint.  Just clears the
  * stopped flag in the context so that the breakpoint routine will
  * return.
  * ====================================================================== */
-int do_bedbug_continue (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-
+int do_bedbug_continue (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-  /* -------------------------------------------------- */
+	/* -------------------------------------------------- */
 
-  if( ! bug_ctx.stopped )
-  {
-    printf( "Not at a breakpoint\n" );
-    return 1;
-  }
+	if (!bug_ctx.stopped) {
+		printf ("Not at a breakpoint\n");
+		return 1;
+	}
 
-  bug_ctx.stopped = 0;
-  return 0;
-} /* do_bedbug_continue */
-U_BOOT_CMD(
-	continue,      1,      0,      do_bedbug_continue,
-	"continue- continue from a breakpoint\n",
-	" - continue from a breakpoint.\n"
-);
+	bug_ctx.stopped = 0;
+	return 0;
+}				/* do_bedbug_continue */
+
+U_BOOT_CMD (continue, 1, 0, do_bedbug_continue,
+	    "continue- continue from a breakpoint\n",
+	    " - continue from a breakpoint.\n");
 
 /* ======================================================================
  * Interpreter command to continue to the next instruction, stepping into
@@ -300,31 +292,30 @@
  * the address passes control to the CPU-specific set breakpoint routine
  * for the current breakpoint number.
  * ====================================================================== */
-int do_bedbug_step (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-  unsigned long addr;   /* Address to stop at */
-  /* -------------------------------------------------- */
+	unsigned long addr;	/* Address to stop at */
 
-  if( ! bug_ctx.stopped )
-  {
-    printf( "Not at a breakpoint\n" );
-    return 1;
-  }
+	/* -------------------------------------------------- */
 
-  if( !find_next_address( (unsigned char *)&addr, FALSE, bug_ctx.regs ))
-    return 1;
+	if (!bug_ctx.stopped) {
+		printf ("Not at a breakpoint\n");
+		return 1;
+	}
 
-  if( bug_ctx.set )
-    (*bug_ctx.set)( bug_ctx.current_bp, addr );
+	if (!find_next_address ((unsigned char *) &addr, FALSE, bug_ctx.regs))
+		return 1;
 
-  bug_ctx.stopped = 0;
-  return 0;
-} /* do_bedbug_step */
-U_BOOT_CMD(
-	step,      1,      1,      do_bedbug_step,
-	"step    - single step execution.\n",
-	" - single step execution.\n"
-);
+	if (bug_ctx.set)
+		(*bug_ctx.set) (bug_ctx.current_bp, addr);
+
+	bug_ctx.stopped = 0;
+	return 0;
+}				/* do_bedbug_step */
+
+U_BOOT_CMD (step, 1, 1, do_bedbug_step,
+	    "step    - single step execution.\n",
+	    " - single step execution.\n");
 
 /* ======================================================================
  * Interpreter command to continue to the next instruction, stepping over
@@ -332,105 +323,97 @@
  * the address passes control to the CPU-specific set breakpoint routine
  * for the current breakpoint number.
  * ====================================================================== */
-int do_bedbug_next (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-  unsigned long addr;   /* Address to stop at */
-  /* -------------------------------------------------- */
+	unsigned long addr;	/* Address to stop at */
 
-  if( ! bug_ctx.stopped )
-  {
-    printf( "Not at a breakpoint\n" );
-    return 1;
-  }
+	/* -------------------------------------------------- */
 
-  if( !find_next_address( (unsigned char *)&addr, TRUE, bug_ctx.regs ))
-    return 1;
+	if (!bug_ctx.stopped) {
+		printf ("Not at a breakpoint\n");
+		return 1;
+	}
 
-  if( bug_ctx.set )
-    (*bug_ctx.set)( bug_ctx.current_bp, addr );
+	if (!find_next_address ((unsigned char *) &addr, TRUE, bug_ctx.regs))
+		return 1;
 
-  bug_ctx.stopped = 0;
-  return 0;
-} /* do_bedbug_next */
-U_BOOT_CMD(
-	next,      1,      1,      do_bedbug_next,
-	"next    - single step execution, stepping over subroutines.\n",
-	" - single step execution, stepping over subroutines.\n"
-);
+	if (bug_ctx.set)
+		(*bug_ctx.set) (bug_ctx.current_bp, addr);
+
+	bug_ctx.stopped = 0;
+	return 0;
+}				/* do_bedbug_next */
+
+U_BOOT_CMD (next, 1, 1, do_bedbug_next,
+	    "next    - single step execution, stepping over subroutines.\n",
+	    " - single step execution, stepping over subroutines.\n");
 
 /* ======================================================================
  * Interpreter command to print the current stack.  This assumes an EABI
  * architecture, so it starts with GPR R1 and works back up the stack.
  * ====================================================================== */
-int do_bedbug_stack (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_stack (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
+	unsigned long sp;	/* Stack pointer                */
+	unsigned long func;	/* LR from stack                */
+	int depth;		/* Stack iteration level        */
+	int skip = 1;		/* Flag to skip the first entry */
+	unsigned long top;	/* Top of memory address        */
 
-  unsigned long sp;             /* Stack pointer                */
-  unsigned long func;           /* LR from stack                */
-  int           depth;          /* Stack iteration level        */
-  int           skip = 1;       /* Flag to skip the first entry */
-  unsigned long top;            /* Top of memory address        */
-  /* -------------------------------------------------- */
+	/* -------------------------------------------------- */
 
-  if( ! bug_ctx.stopped )
-  {
-    printf( "Not at a breakpoint\n" );
-    return 1;
-  }
+	if (!bug_ctx.stopped) {
+		printf ("Not at a breakpoint\n");
+		return 1;
+	}
 
-  top = gd->bd->bi_memstart + gd->bd->bi_memsize;
-  depth = 0;
+	top = gd->bd->bi_memstart + gd->bd->bi_memsize;
+	depth = 0;
 
-  printf( "Depth     PC\n" );
-  printf( "-----  --------\n" );
-  printf( "%5d  %08lx\n", depth++, bug_ctx.regs->nip );
+	printf ("Depth     PC\n");
+	printf ("-----  --------\n");
+	printf ("%5d  %08lx\n", depth++, bug_ctx.regs->nip);
 
-  sp = bug_ctx.regs->gpr[ 1 ];
-  func = *(unsigned long *)(sp+4);
+	sp = bug_ctx.regs->gpr[1];
+	func = *(unsigned long *) (sp + 4);
 
-  while(( func < top ) && ( sp < top ))
-  {
-    if( !skip )
-      printf( "%5d  %08lx\n", depth++, func );
-    else
-      --skip;
+	while ((func < top) && (sp < top)) {
+		if (!skip)
+			printf ("%5d  %08lx\n", depth++, func);
+		else
+			--skip;
 
-    sp = *(unsigned long *)sp;
-    func = *(unsigned long *)(sp+4);
-  }
-  return 0;
-} /* do_bedbug_stack */
-U_BOOT_CMD(
-	where,     1,      1,      do_bedbug_stack,
-	"where   - Print the running stack.\n",
-	" - Print the running stack.\n"
-);
+		sp = *(unsigned long *) sp;
+		func = *(unsigned long *) (sp + 4);
+	}
+	return 0;
+}				/* do_bedbug_stack */
+
+U_BOOT_CMD (where, 1, 1, do_bedbug_stack,
+	    "where   - Print the running stack.\n",
+	    " - Print the running stack.\n");
 
 /* ======================================================================
  * Interpreter command to dump the registers.  Calls the CPU-specific
  * show registers routine.
  * ====================================================================== */
-int do_bedbug_rdump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-  /* -------------------------------------------------- */
+	/* -------------------------------------------------- */
 
-  if( ! bug_ctx.stopped )
-  {
-    printf( "Not at a breakpoint\n" );
-    return 1;
-  }
+	if (!bug_ctx.stopped) {
+		printf ("Not at a breakpoint\n");
+		return 1;
+	}
 
-  show_regs( bug_ctx.regs );
-  return 0;
-} /* do_bedbug_rdump */
-U_BOOT_CMD(
-	rdump,     1,      1,      do_bedbug_rdump,
-	"rdump   - Show registers.\n",
-	" - Show registers.\n"
-);
+	show_regs (bug_ctx.regs);
+	return 0;
+}				/* do_bedbug_rdump */
+
+U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump,
+	    "rdump   - Show registers.\n", " - Show registers.\n");
 /* ====================================================================== */
-#endif	/* CFG_CMD_BEDBUG */
+#endif /* CFG_CMD_BEDBUG */
 
 
 /*
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index 5b58d4e..e68f16f 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -28,14 +28,12 @@
 #include <command.h>
 #include <net.h>
 
-
-/* -------------------------------------------------------------------- */
+#if defined(CONFIG_I386)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
 
 int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-#if defined(CONFIG_I386)
-	DECLARE_GLOBAL_DATA_PTR;
-#endif
 	ulong	addr, rc;
 	int     rcode = 0;
 
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index aeb7842..fdf7180 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -38,6 +38,8 @@
 #include <ft_build.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
  /*cmd_boot.c*/
  extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
@@ -469,7 +471,6 @@
 static void
 fixup_silent_linux ()
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	char buf[256], *start, *end;
 	char *cmdline = getenv ("bootargs");
 
@@ -512,8 +513,6 @@
 		ulong	*len_ptr,
 		int	verify)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong	sp;
 	ulong	len, checksum;
 	ulong	initrd_start, initrd_end;
@@ -856,8 +855,6 @@
 		ulong	*len_ptr,
 		int	verify)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	image_header_t *hdr = &header;
 
 	void	(*loader)(bd_t *, image_header_t *, char *, char *);
@@ -941,7 +938,6 @@
 		ulong	*len_ptr,
 		int	verify)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong top;
 	char *s, *cmdline;
 	char **fwenv, **ss;
@@ -1370,7 +1366,6 @@
 do_bootm_rtems (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 		ulong addr, ulong *len_ptr, int verify)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	image_header_t *hdr = &header;
 	void	(*entry_point)(bd_t *);
 
diff --git a/common/cmd_date.c b/common/cmd_date.c
index a569d78..84932f7 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -28,6 +28,8 @@
 #include <command.h>
 #include <rtc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if (CONFIG_COMMANDS & CFG_CMD_DATE)
 
 const char *weekdays[] = {
@@ -40,7 +42,6 @@
 
 int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	struct rtc_time tm;
 	int rcode = 0;
 
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index eccf2e9..1d92bb3 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -19,6 +19,9 @@
 #include <net.h>
 #include <elf.h>
 
+#if defined(CONFIG_WALNUT) || defined(CFG_VXWORKS_MAC_PTR)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
 
 #if (CONFIG_COMMANDS & CFG_CMD_ELF)
 
@@ -78,11 +81,6 @@
  * ====================================================================== */
 int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-#if defined(CONFIG_WALNUT)	|| \
-    defined(CFG_VXWORKS_MAC_PTR)
-	DECLARE_GLOBAL_DATA_PTR;
-#endif
-
 	unsigned long addr;		/* Address of image            */
 	unsigned long bootaddr;		/* Address to put the bootline */
 	char *bootline;			/* Text of the bootline        */
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index b67d35a..41621ba 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -60,6 +60,10 @@
 # define SHOW_BOOT_PROGRESS(arg)
 #endif
 
+#ifdef CONFIG_IDE_8xx_DIRECT
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 #ifdef __PPC__
 # define EIEIO		__asm__ volatile ("eieio")
 # define SYNC		__asm__ volatile ("sync")
@@ -498,7 +502,6 @@
 {
 
 #ifdef CONFIG_IDE_8xx_DIRECT
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
 #endif
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index 559d7b4..fa79b45 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -41,6 +41,10 @@
 #include <asm/iopin_8260.h>
 #endif
 
+#if defined(CONFIG_8xx) || defined(CONFIG_8260)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 static void
 unimplemented ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -450,10 +454,8 @@
 	uint div16 = (val & CPM_BRG_DIV16) != 0;
 
 #if defined(CONFIG_8xx)
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong clock = gd->cpu_clk;
 #elif defined(CONFIG_8260)
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong clock = gd->brg_clk;
 #endif
 
diff --git a/common/cmd_load.c b/common/cmd_load.c
index 7498497..b18709a 100644
--- a/common/cmd_load.c
+++ b/common/cmd_load.c
@@ -30,6 +30,7 @@
 #include <net.h>
 #include <exports.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 #if (CONFIG_COMMANDS & CFG_CMD_LOADS)
 static ulong load_serial (ulong offset);
@@ -53,7 +54,6 @@
 	char *env_echo;
 	int rcode = 0;
 #ifdef	CFG_LOADS_BAUD_CHANGE
-	DECLARE_GLOBAL_DATA_PTR;
 	int load_baudrate, current_baudrate;
 
 	load_baudrate = current_baudrate = gd->baudrate;
@@ -213,7 +213,6 @@
 static int
 read_record (char *buf, ulong len)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	char *p;
 	char c;
 
@@ -256,7 +255,6 @@
 	ulong offset = 0;
 	ulong size   = 0;
 #ifdef	CFG_LOADS_BAUD_CHANGE
-	DECLARE_GLOBAL_DATA_PTR;
 	int save_baudrate, current_baudrate;
 
 	save_baudrate = current_baudrate = gd->baudrate;
@@ -433,8 +431,6 @@
 
 int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong offset = 0;
 	ulong addr;
 	int load_baudrate, current_baudrate;
diff --git a/common/cmd_log.c b/common/cmd_log.c
index efc9689..042a403 100644
--- a/common/cmd_log.c
+++ b/common/cmd_log.c
@@ -46,6 +46,8 @@
 #include <post.h>
 #include <logbuff.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_LOGBUFFER)
 
 /* Local prototypes */
@@ -73,7 +75,6 @@
    in linux/kernel/printk */
 void logbuff_init_ptrs (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned long *ext_tag;
 	unsigned long post_word;
 	char *s;
@@ -139,8 +140,6 @@
 
 void logbuff_log(char *msg)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if ((gd->post_log_word & LOGBUFF_INITIALIZED)) {
 		logbuff_printk (msg);
 	} else {
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index ecf1db4..6257fbd 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -50,6 +50,8 @@
 #include <net.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if !defined(CFG_ENV_IS_IN_NVRAM)	&& \
     !defined(CFG_ENV_IS_IN_EEPROM)	&& \
     !defined(CFG_ENV_IS_IN_FLASH)	&& \
@@ -152,8 +154,6 @@
 
 int _do_setenv (int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int   i, len, oldval;
 	int   console = -1;
 	uchar *env, *nxt = NULL;
diff --git a/common/console.c b/common/console.c
index 3c535d2..e9f23be 100644
--- a/common/console.c
+++ b/common/console.c
@@ -27,6 +27,8 @@
 #include <console.h>
 #include <exports.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_AMIGAONEG3SE
 int console_changed = 0;
 #endif
@@ -48,7 +50,6 @@
 
 static int console_setfile (int file, device_t * dev)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int error = 0;
 
 	if (dev == NULL)
@@ -161,8 +162,6 @@
 
 int getc (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (gd->flags & GD_FLG_DEVINIT) {
 		/* Get from the standard input */
 		return fgetc (stdin);
@@ -174,8 +173,6 @@
 
 int tstc (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (gd->flags & GD_FLG_DEVINIT) {
 		/* Test the standard input */
 		return ftstc (stdin);
@@ -187,8 +184,6 @@
 
 void putc (const char c)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 #ifdef CONFIG_SILENT_CONSOLE
 	if (gd->flags & GD_FLG_SILENT)
 		return;
@@ -205,8 +200,6 @@
 
 void puts (const char *s)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 #ifdef CONFIG_SILENT_CONSOLE
 	if (gd->flags & GD_FLG_SILENT)
 		return;
@@ -258,8 +251,6 @@
 static int ctrlc_was_pressed = 0;
 int ctrlc (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (!ctrlc_disabled && gd->have_console) {
 		if (tstc ()) {
 			switch (getc ()) {
@@ -370,8 +361,6 @@
 /* Called before relocation - use serial functions */
 int console_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->have_console = 1;
 
 #ifdef CONFIG_SILENT_CONSOLE
@@ -407,7 +396,6 @@
 /* Called after the relocation - use desired console functions */
 int console_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	char *stdinname, *stdoutname, *stderrname;
 	device_t *inputdev = NULL, *outputdev = NULL, *errdev = NULL;
 #ifdef CFG_CONSOLE_ENV_OVERWRITE
@@ -499,8 +487,6 @@
 /* Called after the relocation - use desired console functions */
 int console_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	device_t *inputdev = NULL, *outputdev = NULL;
 	int i, items = ListNumItems (devlist);
 
diff --git a/common/devices.c b/common/devices.c
index bd4dfa0..ddf8f8e 100644
--- a/common/devices.c
+++ b/common/devices.c
@@ -34,6 +34,8 @@
 #include <i2c.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 list_t devlist = 0;
 device_t *stdio_devices[] = { NULL, NULL, NULL };
 char *stdio_names[MAX_FILES] = { "stdin", "stdout", "stderr" };
@@ -160,8 +162,6 @@
 int devices_init (void)
 {
 #ifndef CONFIG_ARM     /* already relocated for current ARM implementation */
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong relocation_offset = gd->reloc_off;
 	int i;
 
diff --git a/common/dlmalloc.c b/common/dlmalloc.c
index 0c04872..20c2069 100644
--- a/common/dlmalloc.c
+++ b/common/dlmalloc.c
@@ -949,6 +949,8 @@
 #endif	/* 0 */			/* Moved to malloc.h */
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
   Emulation of sbrk for WIN32
   All code within the ifdef WIN32 is untested by me.
@@ -1493,8 +1495,6 @@
 
 void malloc_bin_reloc (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long *p = (unsigned long *)(&av_[2]);
 	int i;
 	for (i=2; i<(sizeof(av_)/sizeof(mbinptr)); ++i) {
diff --git a/common/env_common.c b/common/env_common.c
index 3201135..eb33422 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -37,6 +37,8 @@
 # define SHOW_BOOT_PROGRESS(arg)
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_AMIGAONEG3SE
 	extern void enable_nvram(void);
 	extern void disable_nvram(void);
@@ -150,7 +152,6 @@
 
 static uchar env_get_char_init (int index)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	uchar c;
 
 	/* if crc was bad, use the default environment */
@@ -167,7 +168,6 @@
 #ifdef CONFIG_AMIGAONEG3SE
 uchar env_get_char_memory (int index)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	uchar retval;
 	enable_nvram();
 	if (gd->env_valid) {
@@ -181,8 +181,6 @@
 #else
 uchar env_get_char_memory (int index)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (gd->env_valid) {
 		return ( *((uchar *)(gd->env_addr + index)) );
 	} else {
@@ -193,8 +191,6 @@
 
 uchar *env_get_addr (int index)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (gd->env_valid) {
 		return ( ((uchar *)(gd->env_addr + index)) );
 	} else {
@@ -204,8 +200,6 @@
 
 void env_relocate (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	DEBUGF ("%s[%d] offset = 0x%lx\n", __FUNCTION__,__LINE__,
 		gd->reloc_off);
 
diff --git a/common/env_dataflash.c b/common/env_dataflash.c
index 8834da0..93fff29 100644
--- a/common/env_dataflash.c
+++ b/common/env_dataflash.c
@@ -26,6 +26,8 @@
 #include <linux/stddef.h>
 #include <dataflash.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 env_t *env_ptr = NULL;
 
 char * env_name_spec = "dataflash";
@@ -68,8 +70,6 @@
  */
 int env_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong crc, len, new;
 	unsigned off;
 	uchar buf[64];
diff --git a/common/env_eeprom.c b/common/env_eeprom.c
index 50c623e..2adc129 100644
--- a/common/env_eeprom.c
+++ b/common/env_eeprom.c
@@ -32,6 +32,8 @@
 #include <environment.h>
 #include <linux/stddef.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 env_t *env_ptr = NULL;
 
 char * env_name_spec = "EEPROM";
@@ -75,8 +77,6 @@
  */
 int env_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong crc, len, new;
 	unsigned off;
 	uchar buf[64];
diff --git a/common/env_flash.c b/common/env_flash.c
index a2ea9c4..1674b30 100644
--- a/common/env_flash.c
+++ b/common/env_flash.c
@@ -35,6 +35,8 @@
 #include <linux/stddef.h>
 #include <malloc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if ((CONFIG_COMMANDS&(CFG_CMD_ENV|CFG_CMD_FLASH)) == (CFG_CMD_ENV|CFG_CMD_FLASH))
 #define CMD_SAVEENV
 #elif defined(CFG_ENV_ADDR_REDUND)
@@ -89,8 +91,6 @@
 
 uchar env_get_char_spec (int index)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	return ( *((uchar *)(gd->env_addr + index)) );
 }
 
@@ -98,7 +98,6 @@
 
 int  env_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int crc1_ok = 0, crc2_ok = 0;
 
 	uchar flag1 = flash_addr->flags;
@@ -260,7 +259,6 @@
 
 int  env_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef CONFIG_OMAP2420H4
 	int flash_probe(void);
 
@@ -358,8 +356,6 @@
 {
 #if !defined(ENV_IS_EMBEDDED) || defined(CFG_ENV_ADDR_REDUND)
 #ifdef CFG_ENV_ADDR_REDUND
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (gd->env_addr != (ulong)&(flash_addr->data)) {
 		env_t * etmp = flash_addr;
 		ulong ltmp = end_addr;
diff --git a/common/env_nand.c b/common/env_nand.c
index a6af74a..0a05b09 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -78,11 +78,10 @@
 /* local functions */
 static void use_default(void);
 
+DECLARE_GLOBAL_DATA_PTR;
 
 uchar env_get_char_spec (int index)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	return ( *((uchar *)(gd->env_addr + index)) );
 }
 
@@ -95,8 +94,6 @@
  */
 int env_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->env_addr  = (ulong)&default_environment[0];
 	gd->env_valid = 1;
 
@@ -114,8 +111,6 @@
 	ulong total;
 	int ret = 0;
 
-	DECLARE_GLOBAL_DATA_PTR;
-
 	env_ptr->flags++;
 	total = CFG_ENV_SIZE;
 
@@ -174,8 +169,6 @@
 	int crc1_ok = 0, crc2_ok = 0;
 	env_t *tmp_env1, *tmp_env2;
 
-	DECLARE_GLOBAL_DATA_PTR;
-
 	total = CFG_ENV_SIZE;
 
 	tmp_env1 = (env_t *) malloc(CFG_ENV_SIZE);
@@ -245,8 +238,6 @@
 
 static void use_default()
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	puts ("*** Warning - bad CRC or NAND, using default environment\n\n");
 
 	if (default_environment_size > CFG_ENV_SIZE){
diff --git a/common/env_nowhere.c b/common/env_nowhere.c
index ee4237c..17ecc77 100644
--- a/common/env_nowhere.c
+++ b/common/env_nowhere.c
@@ -32,6 +32,8 @@
 #include <environment.h>
 #include <linux/stddef.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 env_t *env_ptr = NULL;
 
 extern uchar default_environment[];
@@ -44,8 +46,6 @@
 
 uchar env_get_char_spec (int index)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	return ( *((uchar *)(gd->env_addr + index)) );
 }
 
@@ -56,8 +56,6 @@
  */
 int  env_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->env_addr  = (ulong)&default_environment[0];
 	gd->env_valid = 0;
 
diff --git a/common/env_nvram.c b/common/env_nvram.c
index a406e42..7c18896 100644
--- a/common/env_nvram.c
+++ b/common/env_nvram.c
@@ -42,6 +42,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CFG_ENV_IS_IN_NVRAM /* Environment is in NVRAM */
 
 #include <command.h>
@@ -74,7 +76,6 @@
 
 	return c;
 #else
-	DECLARE_GLOBAL_DATA_PTR;
 	uchar retval;
 	enable_nvram();
 	retval = *((uchar *)(gd->env_addr + index));
@@ -92,8 +93,6 @@
 
 	return c;
 #else
-	DECLARE_GLOBAL_DATA_PTR;
-
 	return *((uchar *)(gd->env_addr + index));
 #endif
 }
@@ -135,7 +134,6 @@
  */
 int env_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef CONFIG_AMIGAONEG3SE
 	enable_nvram();
 #endif
diff --git a/common/exports.c b/common/exports.c
index 9858217..ef25338 100644
--- a/common/exports.c
+++ b/common/exports.c
@@ -1,6 +1,8 @@
 #include <common.h>
 #include <exports.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static void dummy(void)
 {
 }
@@ -12,7 +14,6 @@
 
 void jumptable_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int i;
 
 	gd->jt = (void **) malloc (XF_MAX * sizeof (void *));
diff --git a/common/hush.c b/common/hush.c
index bb5041a..feb5627 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -138,6 +138,8 @@
 #endif
 
 #ifdef __U_BOOT__
+DECLARE_GLOBAL_DATA_PTR;
+
 #define EXIT_SUCCESS 0
 #define EOF -1
 #define syntax() syntax_err()
@@ -3272,7 +3274,6 @@
 #ifdef __U_BOOT__
 static void u_boot_hush_reloc(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned long addr;
 	struct reserved_combo *r;
 
diff --git a/common/lcd.c b/common/lcd.c
index e64972f..0be1912 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -50,7 +50,6 @@
 #include <lcdvideo.h>
 #endif
 
-
 #ifdef CONFIG_LCD
 
 /************************************************************************/
@@ -68,6 +67,8 @@
 # endif
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 ulong lcd_setmem (ulong addr);
 
 static void lcd_drawchars (ushort x, ushort y, uchar *str, int count);
@@ -339,8 +340,6 @@
 
 int drv_lcd_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	device_t lcddev;
 	int rc;
 
@@ -682,8 +681,6 @@
 static void *lcd_logo (void)
 {
 #ifdef CONFIG_LCD_INFO
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char info[80];
 	char temp[32];
 #endif /* CONFIG_LCD_INFO */
diff --git a/common/lynxkdi.c b/common/lynxkdi.c
index ed1b595..76a271b 100644
--- a/common/lynxkdi.c
+++ b/common/lynxkdi.c
@@ -20,13 +20,14 @@
 #if defined(CONFIG_LYNXKDI)
 #include <lynxkdi.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_MPC8260) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
 void lynxkdi_boot ( image_header_t *hdr )
 {
 	void (*lynxkdi)(void) = (void(*)(void)) ntohl(hdr->ih_ep);
 	lynxos_bootparms_t *parms = (lynxos_bootparms_t *)0x0020;
 	bd_t *kbd;
-	DECLARE_GLOBAL_DATA_PTR;
 	u32 *psz = (u32 *)(ntohl(hdr->ih_load) + 0x0204);
 
 	memset( parms, 0, sizeof(*parms));
diff --git a/common/main.c b/common/main.c
index 445cb18..758ef8d 100644
--- a/common/main.c
+++ b/common/main.c
@@ -36,6 +36,10 @@
 
 #include <post.h>
 
+#ifdef CONFIG_SILENT_CONSOLE
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 #if defined(CONFIG_BOOT_RETRY_TIME) && defined(CONFIG_RESET_TO_RETRY)
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);		/* for do_reset() prototype */
 #endif
@@ -105,14 +109,10 @@
 	u_int i;
 
 #ifdef CONFIG_SILENT_CONSOLE
-	{
-		DECLARE_GLOBAL_DATA_PTR;
-
-		if (gd->flags & GD_FLG_SILENT) {
-			/* Restore serial console */
-			console_assign (stdout, "serial");
-			console_assign (stderr, "serial");
-		}
+	if (gd->flags & GD_FLG_SILENT) {
+		/* Restore serial console */
+		console_assign (stdout, "serial");
+		console_assign (stderr, "serial");
 	}
 #endif
 
@@ -195,17 +195,13 @@
 #  endif
 
 #ifdef CONFIG_SILENT_CONSOLE
-	{
-		DECLARE_GLOBAL_DATA_PTR;
-
-		if (abort) {
-			/* permanently enable normal console output */
-			gd->flags &= ~(GD_FLG_SILENT);
-		} else if (gd->flags & GD_FLG_SILENT) {
-			/* Restore silent console */
-			console_assign (stdout, "nulldev");
-			console_assign (stderr, "nulldev");
-		}
+	if (abort) {
+		/* permanently enable normal console output */
+		gd->flags &= ~(GD_FLG_SILENT);
+	} else if (gd->flags & GD_FLG_SILENT) {
+		/* Restore silent console */
+		console_assign (stdout, "nulldev");
+		console_assign (stderr, "nulldev");
 	}
 #endif
 
@@ -223,14 +219,10 @@
 	int abort = 0;
 
 #ifdef CONFIG_SILENT_CONSOLE
-	{
-		DECLARE_GLOBAL_DATA_PTR;
-
-		if (gd->flags & GD_FLG_SILENT) {
-			/* Restore serial console */
-			console_assign (stdout, "serial");
-			console_assign (stderr, "serial");
-		}
+	if (gd->flags & GD_FLG_SILENT) {
+		/* Restore serial console */
+		console_assign (stdout, "serial");
+		console_assign (stderr, "serial");
 	}
 #endif
 
@@ -279,17 +271,13 @@
 	putc ('\n');
 
 #ifdef CONFIG_SILENT_CONSOLE
-	{
-		DECLARE_GLOBAL_DATA_PTR;
-
-		if (abort) {
-			/* permanently enable normal console output */
-			gd->flags &= ~(GD_FLG_SILENT);
-		} else if (gd->flags & GD_FLG_SILENT) {
-			/* Restore silent console */
-			console_assign (stdout, "nulldev");
-			console_assign (stderr, "nulldev");
-		}
+	if (abort) {
+		/* permanently enable normal console output */
+		gd->flags &= ~(GD_FLG_SILENT);
+	} else if (gd->flags & GD_FLG_SILENT) {
+		/* Restore silent console */
+		console_assign (stdout, "nulldev");
+		console_assign (stderr, "nulldev");
 	}
 #endif
 
diff --git a/common/serial.c b/common/serial.c
index 22d8fd0..2acbd08 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -25,6 +25,8 @@
 #include <serial.h>
 #include <devices.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_SERIAL_MULTI)
 
 static struct serial_device *serial_devices = NULL;
@@ -49,8 +51,6 @@
 
 static int serial_register (struct serial_device *dev)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	dev->init += gd->reloc_off;
 	dev->setbrg += gd->reloc_off;
 	dev->getc += gd->reloc_off;
@@ -131,8 +131,6 @@
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
 		struct serial_device *dev = default_serial_console ();
 
@@ -144,8 +142,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
 		struct serial_device *dev = default_serial_console ();
 
@@ -158,8 +154,6 @@
 
 int serial_getc (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
 		struct serial_device *dev = default_serial_console ();
 
@@ -171,8 +165,6 @@
 
 int serial_tstc (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
 		struct serial_device *dev = default_serial_console ();
 
@@ -184,8 +176,6 @@
 
 void serial_putc (const char c)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
 		struct serial_device *dev = default_serial_console ();
 
@@ -198,8 +188,6 @@
 
 void serial_puts (const char *s)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
 		struct serial_device *dev = default_serial_console ();
 
diff --git a/common/soft_i2c.c b/common/soft_i2c.c
index b3642da..bffcd44 100644
--- a/common/soft_i2c.c
+++ b/common/soft_i2c.c
@@ -39,6 +39,10 @@
 
 /* #define	DEBUG_I2C	*/
 
+#ifdef DEBUG_I2C
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 
 /*-----------------------------------------------------------------------
  * Definitions
@@ -53,7 +57,6 @@
 
 #ifdef DEBUG_I2C
 #define PRINTD(fmt,args...)	do {	\
-	DECLARE_GLOBAL_DATA_PTR;	\
 	if (gd->have_console)		\
 		printf (fmt ,##args);	\
 	} while (0)
diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c
index 629ed66..706c880 100644
--- a/cpu/74xx_7xx/cpu.c
+++ b/cpu/74xx_7xx/cpu.c
@@ -49,6 +49,8 @@
 #include "../board/MAI/AmigaOneG3SE/memio.h"
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 cpu_t
 get_cpu_type(void)
 {
@@ -111,8 +113,6 @@
 #if !defined(CONFIG_BAB7xx)
 int checkcpu (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint type   = get_cpu_type();
 	uint pvr    = get_pvr();
 	ulong clock = gd->cpu_clk;
@@ -258,8 +258,6 @@
 #ifdef CONFIG_AMIGAONEG3SE
 unsigned long get_tbclk(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	return (gd->bus_clk / 4);
 }
 #else	/* ! CONFIG_AMIGAONEG3SE */
diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c
index f94ff78..2dc5107 100644
--- a/cpu/74xx_7xx/speed.c
+++ b/cpu/74xx_7xx/speed.c
@@ -29,6 +29,8 @@
 #include "../board/MAI/AmigaOneG3SE/via686.h"
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static const int hid1_multipliers_x_10[] = {
 	25,	/* 0000 - 2.5x */
 	75,	/* 0001 - 7.5x */
@@ -85,7 +87,6 @@
 
 int get_clocks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong clock = 0;
 
 	/* calculate the clock frequency based upon the CPU type */
diff --git a/cpu/74xx_7xx/traps.c b/cpu/74xx_7xx/traps.c
index ac5f8bf..50c5eeb 100644
--- a/cpu/74xx_7xx/traps.c
+++ b/cpu/74xx_7xx/traps.c
@@ -36,6 +36,10 @@
 #include <command.h>
 #include <asm/processor.h>
 
+#ifdef CONFIG_AMIGAONEG3SE
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 int (*debugger_exception_handler)(struct pt_regs *) = 0;
 #endif
@@ -58,9 +62,6 @@
 void
 print_backtrace(unsigned long *sp)
 {
-#ifdef CONFIG_AMIGAONEG3SE
-	DECLARE_GLOBAL_DATA_PTR;
-#endif
 	int cnt = 0;
 	unsigned long i;
 
diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c
index 85a4849..fa78eaa 100644
--- a/cpu/arm1136/cpu.c
+++ b/cpu/arm1136/cpu.c
@@ -37,6 +37,10 @@
 #include <asm/arch/omap2420.h>
 #endif
 
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 /* read co-processor 15, register #1 (control register) */
 static unsigned long read_p15_c1 (void)
 {
@@ -88,8 +92,6 @@
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
 	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c
index 0f99979..054bab9 100644
--- a/cpu/arm720t/serial.c
+++ b/cpu/arm720t/serial.c
@@ -34,10 +34,10 @@
 
 #include <clps7111.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned int reg = 0;
 
 	switch (gd->baudrate) {
diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c
index 5ad98f0..bc6bf30 100644
--- a/cpu/arm720t/serial_netarm.c
+++ b/cpu/arm720t/serial_netarm.c
@@ -34,6 +34,8 @@
 
 #include <asm/hardware.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define PORTA	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA))
 #if !defined(CONFIG_NETARM_NS7520)
 #define PORTB	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB))
@@ -67,9 +69,6 @@
  */
 void serial_setbrg (void)
 {
-	/* get the gd pointer */
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* set 0 ... make sure pins are configured for serial */
 #if !defined(CONFIG_NETARM_NS7520)
 	PORTA = PORTB =
diff --git a/cpu/arm920t/at91rm9200/serial.c b/cpu/arm920t/at91rm9200/serial.c
index a281932..d563445 100644
--- a/cpu/arm920t/at91rm9200/serial.c
+++ b/cpu/arm920t/at91rm9200/serial.c
@@ -33,6 +33,8 @@
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if !defined(CONFIG_DBGU) && !defined(CONFIG_USART0) && !defined(CONFIG_USART1)
 #error must define one of CONFIG_DBGU or CONFIG_USART0 or CONFIG_USART1
 #endif
@@ -50,7 +52,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int baudrate;
 
 	if ((baudrate = gd->baudrate) <= 0)
diff --git a/cpu/arm920t/cpu.c b/cpu/arm920t/cpu.c
index 2f7963d..f93bf57 100644
--- a/cpu/arm920t/cpu.c
+++ b/cpu/arm920t/cpu.c
@@ -33,6 +33,10 @@
 #include <command.h>
 #include <arm920t.h>
 
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 /* read co-processor 15, register #1 (control register) */
 static unsigned long read_p15_c1 (void)
 {
@@ -91,8 +95,6 @@
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
 	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
diff --git a/cpu/arm920t/ks8695/serial.c b/cpu/arm920t/ks8695/serial.c
index 0dd91e7..aacd1be 100644
--- a/cpu/arm920t/ks8695/serial.c
+++ b/cpu/arm920t/ks8695/serial.c
@@ -25,6 +25,8 @@
 #error "Bad: you didn't configure serial ..."
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  *	Define the UART hardware register access structure.
  */
@@ -54,7 +56,6 @@
 
 void serial_setbrg(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
 
 	/* Set to global baud rate and 8 data bits, no parity, 1 stop bit*/
diff --git a/cpu/arm920t/s3c24x0/serial.c b/cpu/arm920t/s3c24x0/serial.c
index 8327443..36851ad 100644
--- a/cpu/arm920t/s3c24x0/serial.c
+++ b/cpu/arm920t/s3c24x0/serial.c
@@ -27,6 +27,8 @@
 #include <s3c2410.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_SERIAL1
 #define UART_NR	S3C24X0_UART0
 
@@ -48,7 +50,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
 	int i;
 	unsigned int reg = 0;
diff --git a/cpu/arm925t/cpu.c b/cpu/arm925t/cpu.c
index c1c6b03..d85b7fa 100644
--- a/cpu/arm925t/cpu.c
+++ b/cpu/arm925t/cpu.c
@@ -33,6 +33,10 @@
 #include <command.h>
 #include <arm925t.h>
 
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 /* read co-processor 15, register #1 (control register) */
 static unsigned long read_p15_c1 (void)
 {
@@ -91,8 +95,6 @@
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
 	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
diff --git a/cpu/arm926ejs/cpu.c b/cpu/arm926ejs/cpu.c
index f57c5a5..722732e 100644
--- a/cpu/arm926ejs/cpu.c
+++ b/cpu/arm926ejs/cpu.c
@@ -33,6 +33,10 @@
 #include <command.h>
 #include <arm926ejs.h>
 
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 /* read co-processor 15, register #1 (control register) */
 static unsigned long read_p15_c1 (void)
 {
@@ -91,8 +95,6 @@
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
 	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
diff --git a/cpu/arm946es/cpu.c b/cpu/arm946es/cpu.c
index ba0a4e4..4c63a8d 100644
--- a/cpu/arm946es/cpu.c
+++ b/cpu/arm946es/cpu.c
@@ -33,6 +33,10 @@
 #include <command.h>
 #include <arm946es.h>
 
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 /* read co-processor 15, register #1 (control register) */
 static unsigned long read_p15_c1 (void)
 {
@@ -91,8 +95,6 @@
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
 	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
diff --git a/cpu/arm_intcm/cpu.c b/cpu/arm_intcm/cpu.c
index d03b09d..e2309f8 100644
--- a/cpu/arm_intcm/cpu.c
+++ b/cpu/arm_intcm/cpu.c
@@ -33,14 +33,16 @@
 #include <common.h>
 #include <command.h>
 
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 int cpu_init (void)
 {
 	/*
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
 	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c
index 84ae9d9..7b43ffd 100644
--- a/cpu/bf533/serial.c
+++ b/cpu/bf533/serial.c
@@ -51,6 +51,8 @@
 #include <asm/uaccess.h>
 #include "bf533_serial.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 unsigned long pll_div_fact;
 
 void calc_baud(void)
@@ -72,7 +74,6 @@
 void serial_setbrg(void)
 {
 	int i;
-	DECLARE_GLOBAL_DATA_PTR;
 
 	calc_baud();
 
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index 689e775..c83f0bb 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -36,6 +36,8 @@
 #include <asm/pci.h>
 #include <asm/ic/sc520.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * utility functions for boards based on the AMD sc520
  *
@@ -93,8 +95,6 @@
 
 void init_sc520(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Set the UARTxCTL register at it's slower,
 	 * baud clock giving us a 1.8432 MHz reference
 	 */
@@ -139,7 +139,6 @@
 
 unsigned long init_sc520_dram(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	bd_t *bd = gd->bd;
 
 	u32 dram_present=0;
diff --git a/cpu/i386/serial.c b/cpu/i386/serial.c
index db13008..e7299a7 100644
--- a/cpu/i386/serial.c
+++ b/cpu/i386/serial.c
@@ -55,6 +55,8 @@
 #include <malloc.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define UART_RBR    0x00
 #define UART_THR    0x00
 #define UART_IER    0x01
@@ -126,13 +128,9 @@
 
 int serial_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile char val;
-
 	int bdiv = serial_div(gd->baudrate);
 
-
 	outb(0x80, UART0_BASE + UART_LCR);	/* set DLAB bit */
 	outb(bdiv, UART0_BASE + UART_DLL);	/* set baudrate divisor */
 	outb(bdiv >> 8, UART0_BASE + UART_DLM);/* set baudrate divisor */
@@ -150,8 +148,6 @@
 
 void serial_setbrg(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned short bdiv;
 
 	bdiv = serial_div(gd->baudrate);
@@ -410,8 +406,6 @@
 #if (CONFIG_KGDB_SER_INDEX & 2)
 void kgdb_serial_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile char val;
 	bdiv = serial_div (CONFIG_KGDB_BAUDRATE);
 
diff --git a/cpu/ixp/cpu.c b/cpu/ixp/cpu.c
index 9383473..2a2bd50 100644
--- a/cpu/ixp/cpu.c
+++ b/cpu/ixp/cpu.c
@@ -34,14 +34,16 @@
 #include <command.h>
 #include <asm/arch/ixp425.h>
 
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 int cpu_init (void)
 {
 	/*
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
 	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
diff --git a/cpu/ixp/serial.c b/cpu/ixp/serial.c
index aea0cf8..2015958 100644
--- a/cpu/ixp/serial.c
+++ b/cpu/ixp/serial.c
@@ -31,10 +31,10 @@
 #include <common.h>
 #include <asm/arch/ixp425.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned int quot = 0;
 	int uart = CFG_IXP425_CONSOLE;
 
diff --git a/cpu/lh7a40x/cpu.c b/cpu/lh7a40x/cpu.c
index 718f253..578eb73 100644
--- a/cpu/lh7a40x/cpu.c
+++ b/cpu/lh7a40x/cpu.c
@@ -33,6 +33,10 @@
 #include <command.h>
 #include <arm920t.h>
 
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 /* read co-processor 15, register #1 (control register) */
 static unsigned long read_p15_c1 (void)
 {
@@ -90,8 +94,6 @@
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
 	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
diff --git a/cpu/lh7a40x/serial.c b/cpu/lh7a40x/serial.c
index ff5b2d8..2132c05 100644
--- a/cpu/lh7a40x/serial.c
+++ b/cpu/lh7a40x/serial.c
@@ -21,6 +21,8 @@
 #include <common.h>
 #include <lh7a40x.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_CONSOLE_UART1)
 # define UART_CONSOLE 1
 #elif defined(CONFIG_CONSOLE_UART2)
@@ -33,7 +35,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
 	int i;
 	unsigned int reg = 0;
diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c
index c730922..79628d0 100644
--- a/cpu/mcf52x2/serial.c
+++ b/cpu/mcf52x2/serial.c
@@ -38,6 +38,8 @@
 #include <asm/m5249.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_M5249
 #define DoubleClock(a) ((double)(CFG_CLK/2) / 32.0 / (double)(a))
 #else
@@ -134,12 +136,10 @@
 }
 
 void serial_setbrg(void) {
-	DECLARE_GLOBAL_DATA_PTR;
 	rs_serial_setbaudrate(0,gd->bd->bi_baudrate);
 }
 
 int serial_init(void) {
-	DECLARE_GLOBAL_DATA_PTR;
 	rs_serial_init(0,gd->baudrate);
 	return 0;
 }
diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c
index 519c992..ac860b2 100644
--- a/cpu/mcf52x2/speed.c
+++ b/cpu/mcf52x2/speed.c
@@ -24,13 +24,13 @@
 #include <common.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * get_clocks() fills in gd->cpu_clock and gd->bus_clk
  */
 int get_clocks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->cpu_clk = CFG_CLK;
 #ifdef CONFIG_M5249
 	gd->bus_clk = gd->cpu_clk / 2;
diff --git a/cpu/mpc5xx/cpu.c b/cpu/mpc5xx/cpu.c
index 0c22a31..4bef90c 100644
--- a/cpu/mpc5xx/cpu.c
+++ b/cpu/mpc5xx/cpu.c
@@ -34,6 +34,7 @@
 #include <command.h>
 #include <mpc5xx.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 #if (defined(CONFIG_MPC555))
 #  define	ID_STR	"MPC555/556"
@@ -62,8 +63,6 @@
  */
 int checkcpu (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong clock = gd->cpu_clk;
 	uint immr = get_immr (0);	/* Return full IMMR contents */
 	uint pvr = get_pvr ();		/* Retrieve PVR register */
@@ -104,7 +103,6 @@
  */
 unsigned long get_tbclk (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t *immr = (volatile immap_t *) CFG_IMMR;
 	ulong oscclk, factor;
 
diff --git a/cpu/mpc5xx/serial.c b/cpu/mpc5xx/serial.c
index 4868782..ac5556f 100644
--- a/cpu/mpc5xx/serial.c
+++ b/cpu/mpc5xx/serial.c
@@ -34,6 +34,7 @@
 #include <command.h>
 #include <mpc5xx.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Local function prototypes
@@ -128,7 +129,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	short scxbr;
 
diff --git a/cpu/mpc5xx/speed.c b/cpu/mpc5xx/speed.c
index f6097f5..6a1fa15 100644
--- a/cpu/mpc5xx/speed.c
+++ b/cpu/mpc5xx/speed.c
@@ -31,12 +31,13 @@
 #include <mpc5xx.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Get cpu and bus clock
  */
 int get_clocks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 
 #ifndef	CONFIG_5xx_GCLK_FREQ
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index 2d695d1..563d5af 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -31,10 +31,10 @@
 #include <mpc5xxx.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int checkcpu (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong clock = gd->cpu_clk;
 	char buf[32];
 #ifndef CONFIG_MGT5100
@@ -94,8 +94,6 @@
  */
 unsigned long get_tbclk (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong tbclk;
 
 	tbclk = (gd->bus_clk + 3L) / 4L;
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index 3df0050..4a370ff 100644
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -24,6 +24,8 @@
 #include <common.h>
 #include <mpc5xxx.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Breath some life into the CPU...
  *
@@ -32,8 +34,6 @@
  */
 void cpu_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long addecr = (1 << 25); /* Boot_CS */
 #if defined(CFG_RAMBOOT) && defined(CONFIG_MGT5100)
 	addecr |= (1 << 22); /* SDRAM enable */
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 2e8e549..19737ce 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -14,6 +14,8 @@
 #include "sdma.h"
 #include "fec.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* #define DEBUG	0x28 */
 
 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
@@ -242,7 +244,6 @@
 /********************************************************************/
 static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
 	struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
 
@@ -393,7 +394,6 @@
 /********************************************************************/
 static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
 	const uint8 phyAddr = CONFIG_PHY_ADDR;	/* Only one PHY */
 
diff --git a/cpu/mpc5xxx/i2c.c b/cpu/mpc5xxx/i2c.c
index 044db46..0f02e78 100644
--- a/cpu/mpc5xxx/i2c.c
+++ b/cpu/mpc5xxx/i2c.c
@@ -23,6 +23,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_HARD_I2C
 
 #include <mpc5xxx.h>
@@ -228,7 +230,6 @@
 
 static int mpc_get_fdr(int speed)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	static int fdr = -1;
 
 	if (fdr == -1) {
diff --git a/cpu/mpc5xxx/ide.c b/cpu/mpc5xxx/ide.c
index 1af794c..29b99f6 100644
--- a/cpu/mpc5xxx/ide.c
+++ b/cpu/mpc5xxx/ide.c
@@ -27,6 +27,8 @@
 #ifdef CFG_CMD_IDE
 #include <mpc5xxx.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define CALC_TIMING(t) (t + period - 1) / period
 
 #ifdef CONFIG_IDE_RESET
@@ -35,7 +37,6 @@
 
 int ide_preinit (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	long period, t0, t1, t2_8, t2_16, t4, ta;
 	vu_long reg;
 	struct mpc5xxx_sdma *psdma = (struct mpc5xxx_sdma *) MPC5XXX_SDMA;
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index 91e1def..cacb9f0 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -33,6 +33,8 @@
 #include <common.h>
 #include <mpc5xxx.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_PSC_CONSOLE)
 
 #if CONFIG_PSC_CONSOLE == 1
@@ -55,8 +57,6 @@
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
 	unsigned long baseclk;
 	int div;
@@ -146,8 +146,6 @@
 void
 serial_setbrg(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
 	unsigned long baseclk, div;
 
diff --git a/cpu/mpc5xxx/speed.c b/cpu/mpc5xxx/speed.c
index 4f4e814..7847adc 100644
--- a/cpu/mpc5xxx/speed.c
+++ b/cpu/mpc5xxx/speed.c
@@ -25,6 +25,8 @@
 #include <mpc5xxx.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 /* Bus-to-Core Multipliers */
@@ -43,8 +45,6 @@
 
 int get_clocks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong val, vco;
 
 #if !defined(CFG_MPC5XXX_CLKIN)
@@ -81,8 +81,6 @@
 
 int prt_mpc5xxx_clks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	printf("       Bus %ld MHz, IPB %ld MHz, PCI %ld MHz\n",
 			gd->bus_clk / 1000000, gd->ipb_clk / 1000000,
 			gd->pci_clk / 1000000);
diff --git a/cpu/mpc8220/cpu.c b/cpu/mpc8220/cpu.c
index 0cfe808..be274cd 100644
--- a/cpu/mpc8220/cpu.c
+++ b/cpu/mpc8220/cpu.c
@@ -31,10 +31,10 @@
 #include <mpc8220.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int checkcpu (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong clock = gd->cpu_clk;
 	char buf[32];
 
@@ -81,8 +81,6 @@
  */
 unsigned long get_tbclk (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong tbclk;
 
 	tbclk = (gd->bus_clk + 3L) / 4L;
diff --git a/cpu/mpc8220/cpu_init.c b/cpu/mpc8220/cpu_init.c
index 8c358a8..3cf5f66 100644
--- a/cpu/mpc8220/cpu_init.c
+++ b/cpu/mpc8220/cpu_init.c
@@ -24,6 +24,8 @@
 #include <common.h>
 #include <mpc8220.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Breath some life into the CPU...
  *
@@ -32,8 +34,6 @@
  */
 void cpu_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB;
 	volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
 	volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
diff --git a/cpu/mpc8220/dramSetup.c b/cpu/mpc8220/dramSetup.c
index 1d0d384..08e3172 100644
--- a/cpu/mpc8220/dramSetup.c
+++ b/cpu/mpc8220/dramSetup.c
@@ -32,6 +32,8 @@
 #include "i2cCore.h"
 #include "dramSetup.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define SPD_SIZE	CFG_SDRAM_SPD_SIZE
 #define DRAM_SPD	(CFG_SDRAM_SPD_I2C_ADDR)<<1	/* on Board SPD eeprom */
 #define TOTAL_BANK	CFG_SDRAM_TOTAL_BANKS
@@ -91,8 +93,6 @@
 
 int readSpdData (u8 * spdData)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile i2c8220_t *pi2cReg;
 	volatile pcfg8220_t *pcfg;
 	u8 slvAdr = DRAM_SPD;
@@ -403,8 +403,6 @@
 
 u32 dramSetup (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	draminfo_t DramInfo[TOTAL_BANK];
 	draminfo_t *pDramInfo;
 	u32 size, temp, cfg_value, mode_value, refresh;
diff --git a/cpu/mpc8220/i2c.c b/cpu/mpc8220/i2c.c
index 62f7c0f..d67936d 100644
--- a/cpu/mpc8220/i2c.c
+++ b/cpu/mpc8220/i2c.c
@@ -23,6 +23,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_HARD_I2C
 
 #include <mpc8220.h>
@@ -235,7 +237,6 @@
 
 static int mpc_get_fdr (int speed)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	static int fdr = -1;
 
 	if (fdr == -1) {
diff --git a/cpu/mpc8220/speed.c b/cpu/mpc8220/speed.c
index 8346efe..200a762 100644
--- a/cpu/mpc8220/speed.c
+++ b/cpu/mpc8220/speed.c
@@ -25,6 +25,8 @@
 #include <mpc8220.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 typedef struct pllmultiplier {
 	u8 hid1;
 	int multi;
@@ -39,8 +41,6 @@
 
 int get_clocks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	pllcfg_t bus2core[] = {
 		{0x02, 2, 8},	/* 1 */
 		{0x01, 2, 4},
@@ -109,8 +109,6 @@
 
 int prt_mpc8220_clks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	printf ("       Bus %ld MHz, CPU %ld MHz, PCI %ld MHz, VCO %ld MHz\n",
 		gd->bus_clk / 1000000, gd->cpu_clk / 1000000,
 		gd->pci_clk / 1000000, gd->vco_clk / 1000000);
diff --git a/cpu/mpc8220/uart.c b/cpu/mpc8220/uart.c
index 5f54aac..0c4b536 100644
--- a/cpu/mpc8220/uart.c
+++ b/cpu/mpc8220/uart.c
@@ -30,12 +30,13 @@
 #include <common.h>
 #include <mpc8220.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define PSC_BASE   MMAP_PSC1
 
 #if defined(CONFIG_PSC_CONSOLE)
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
 	u32 counter;
 
@@ -106,8 +107,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
 	u32 counter;
 
diff --git a/cpu/mpc824x/cpu.c b/cpu/mpc824x/cpu.c
index 312dfe2..0a45cc8 100644
--- a/cpu/mpc824x/cpu.c
+++ b/cpu/mpc824x/cpu.c
@@ -26,10 +26,10 @@
 #include <common.h>
 #include <command.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int checkcpu (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned int pvr = get_pvr ();
 	unsigned int version = pvr >> 16;
 	unsigned char revision;
diff --git a/cpu/mpc824x/speed.c b/cpu/mpc824x/speed.c
index a37a087..fdcb972 100644
--- a/cpu/mpc824x/speed.c
+++ b/cpu/mpc824x/speed.c
@@ -29,6 +29,8 @@
 #include <mpc824x.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 /* NOTE: This describes the proper use of this file.
  *
@@ -107,8 +109,6 @@
 /* compute the CPU and memory bus clock frequencies */
 int get_clocks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint hid1 = mfspr(HID1);
 	hid1 = (hid1 >> (32-5)) & 0x1f;
 	gd->cpu_clk = (pllratio_to_factor[hid1] * get_bus_freq(0) + 5)
diff --git a/cpu/mpc8260/commproc.c b/cpu/mpc8260/commproc.c
index e5c5fcf..8777e77 100644
--- a/cpu/mpc8260/commproc.c
+++ b/cpu/mpc8260/commproc.c
@@ -20,11 +20,11 @@
 #include <common.h>
 #include <asm/cpm_8260.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void
 m8260_cpm_reset(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	volatile ulong count;
 
@@ -54,8 +54,6 @@
 uint
 m8260_cpm_dpalloc(uint size, uint align)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	uint	retloc;
 	uint	align_mask, off;
@@ -112,8 +110,6 @@
 void
 m8260_cpm_setbrg(uint brg, uint rate)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	volatile uint	*bp;
 	uint cd = BRG_UART_CLK / rate;
@@ -137,8 +133,6 @@
 void
 m8260_cpm_fastbrg(uint brg, uint rate, int div16)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	volatile uint	*bp;
 
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
index 5d97933..4f23012 100644
--- a/cpu/mpc8260/cpu.c
+++ b/cpu/mpc8260/cpu.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -47,10 +47,10 @@
 #include <asm/processor.h>
 #include <asm/cpm_8260.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int checkcpu (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	ulong clock = gd->cpu_clk;
 	uint pvr = get_pvr ();
@@ -264,8 +264,6 @@
  */
 unsigned long get_tbclk (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong tbclk;
 
 	tbclk = (gd->bus_clk + 3L) / 4L;
diff --git a/cpu/mpc8260/cpu_init.c b/cpu/mpc8260/cpu_init.c
index babcce4..640026b 100644
--- a/cpu/mpc8260/cpu_init.c
+++ b/cpu/mpc8260/cpu_init.c
@@ -26,6 +26,8 @@
 #include <asm/cpm_8260.h>
 #include <ioports.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static void config_8260_ioports (volatile immap_t * immr)
 {
 	int portnum;
@@ -97,7 +99,6 @@
  */
 void cpu_init_f (volatile immap_t * immr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #if !defined(CONFIG_COGENT)		/* done in start.S for the cogent */
 	uint sccr;
 #endif
@@ -222,8 +223,6 @@
  */
 int cpu_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base;
 
 	immr->im_cpm.cp_rccr = CFG_RCCR;
@@ -236,8 +235,6 @@
  */
 int prt_8260_rsr (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	static struct {
 		ulong mask;
 		char *desc;
diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c
index ed3515f..584c40f 100644
--- a/cpu/mpc8260/ether_fcc.c
+++ b/cpu/mpc8260/ether_fcc.c
@@ -51,6 +51,8 @@
 #include <miiphy.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_COMMANDS & CFG_CMD_NET) && \
 	defined(CONFIG_NET_MULTI)
 
@@ -644,8 +646,6 @@
 void
 eth_loopback_test (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	volatile cpm8260_t *cp = &(immr->im_cpm);
 	int c, nclosed;
diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c
index ea97ab8..34bd389 100644
--- a/cpu/mpc8260/i2c.c
+++ b/cpu/mpc8260/i2c.c
@@ -34,6 +34,8 @@
 /* define to enable debug messages */
 #undef  DEBUG_I2C
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* uSec to wait between polls of the i2c */
 #define DELAY_US	100
 /* uSec to wait for the CPM to start processing the buffer */
@@ -213,8 +215,6 @@
 
 void i2c_init(int speed, int slaveadd)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immap = (immap_t *)CFG_IMMR ;
 	volatile cpm8260_t *cp = (cpm8260_t *)&immap->im_cpm;
 	volatile i2c8260_t *i2c	= (i2c8260_t *)&immap->im_i2c;
diff --git a/cpu/mpc8260/interrupts.c b/cpu/mpc8260/interrupts.c
index b2e4d83..56e9a72 100644
--- a/cpu/mpc8260/interrupts.c
+++ b/cpu/mpc8260/interrupts.c
@@ -29,6 +29,8 @@
 #include <mpc8260_irq.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /****************************************************************************/
 
 struct irq_action {
@@ -140,8 +142,6 @@
 
 int interrupt_init_cpu (unsigned *decrementer_count)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 
 	*decrementer_count = (gd->bus_clk / 4) / CFG_HZ;
diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c
index 44576de..ea5514f 100644
--- a/cpu/mpc8260/pci.c
+++ b/cpu/mpc8260/pci.c
@@ -33,6 +33,11 @@
 #include <mpc8260.h>
 #include <asm/m8260_pci.h>
 #include <asm/io.h>
+
+#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 /*
  *   Local->PCI map (from CPU)				   controlled by
  *   MPC826x master window
@@ -234,9 +239,6 @@
 
 void pci_mpc8250_init (struct pci_controller *hose)
 {
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
-	DECLARE_GLOBAL_DATA_PTR;
-#endif
 	u16 tempShort;
 
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
diff --git a/cpu/mpc8260/serial_scc.c b/cpu/mpc8260/serial_scc.c
index 32016f2..3a6eaf0 100644
--- a/cpu/mpc8260/serial_scc.c
+++ b/cpu/mpc8260/serial_scc.c
@@ -32,6 +32,8 @@
 #include <mpc8260.h>
 #include <asm/cpm_8260.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_CONS_ON_SCC)
 
 #if CONFIG_CONS_INDEX == 1	/* Console on SCC1 */
@@ -181,8 +183,6 @@
 void
 serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 #if defined(CONFIG_CONS_USE_EXTC)
 	m8260_cpm_extcbrg(SCC_INDEX, gd->baudrate,
 		CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
diff --git a/cpu/mpc8260/serial_smc.c b/cpu/mpc8260/serial_smc.c
index b486f83..f3dffeb 100644
--- a/cpu/mpc8260/serial_smc.c
+++ b/cpu/mpc8260/serial_smc.c
@@ -34,6 +34,8 @@
 #include <mpc8260.h>
 #include <asm/cpm_8260.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_CONS_ON_SMC)
 
 #if CONFIG_CONS_INDEX == 1	/* Console on SMC1 */
@@ -170,8 +172,6 @@
 void
 serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 #if defined(CONFIG_CONS_USE_EXTC)
 	m8260_cpm_extcbrg(brg_map[SMC_INDEX], gd->baudrate,
 		CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
diff --git a/cpu/mpc8260/speed.c b/cpu/mpc8260/speed.c
index 99afe76..360404f 100644
--- a/cpu/mpc8260/speed.c
+++ b/cpu/mpc8260/speed.c
@@ -25,6 +25,8 @@
 #include <mpc8260.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ------------------------------------------------------------------------- */
 
 /* Bus-to-Core Multiplier */
@@ -101,8 +103,6 @@
 
 int get_clocks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	ulong clkin;
 	ulong sccr, dfbrg;
@@ -159,8 +159,6 @@
 
 int prt_8260_clks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	ulong sccr, dfbrg;
 	ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf, pcidf;
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index f24d3a4..7ca1ceb 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -38,10 +38,11 @@
 #include <ft_build.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 
 int checkcpu(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong clock = gd->cpu_clk;
 	u32 pvr = get_pvr();
 	char buf[32];
@@ -138,8 +139,6 @@
 
 unsigned long get_tbclk(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong tbclk;
 
 	tbclk = (gd->bus_clk + 3L) / 4L;
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index acf6862..6ed0992 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -29,6 +29,8 @@
 #include <mpc83xx.h>
 #include <ioports.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Breathe some life into the CPU...
  *
@@ -38,8 +40,6 @@
  */
 void cpu_init_f (volatile immap_t * im)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
 
diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c
index dfd51c1..5a0babf 100644
--- a/cpu/mpc83xx/interrupts.c
+++ b/cpu/mpc83xx/interrupts.c
@@ -35,6 +35,8 @@
 #include <mpc83xx.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 struct irq_action {
 	interrupt_handler_t *handler;
 	void *arg;
@@ -43,8 +45,6 @@
 
 int interrupt_init_cpu (unsigned *decrementer_count)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *) CFG_IMMRBAR;
 
 	*decrementer_count = (gd->bus_clk / 4) / CFG_HZ;
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 1368fc3..ad6b3f6 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -32,6 +32,8 @@
 #include <mpc83xx.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* ----------------------------------------------------------------- */
 
 typedef enum {
@@ -92,7 +94,6 @@
  */
 int get_clocks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
 	u32 pci_sync_in;
 	u8  spmf;
@@ -342,14 +343,11 @@
  *********************************************/
 ulong get_bus_freq (ulong dummy)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	return gd->csb_clk;
 }
 
 int print_clock_conf (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	printf("Clock configuration:\n");
 	printf("  Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
 	printf("  Core:                %4d MHz\n",gd->core_clk/1000000);
diff --git a/cpu/mpc83xx/traps.c b/cpu/mpc83xx/traps.c
index c7a5638..44345af 100644
--- a/cpu/mpc83xx/traps.c
+++ b/cpu/mpc83xx/traps.c
@@ -40,6 +40,8 @@
 #include <asm/processor.h>
 #include <asm/mpc8349_pci.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* Returns 0 if exception not found and fixup otherwise.  */
 extern unsigned long search_exception_table(unsigned long);
 
@@ -52,7 +54,6 @@
 void
 print_backtrace(unsigned long *sp)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int cnt = 0;
 	unsigned long i;
 
diff --git a/cpu/mpc85xx/commproc.c b/cpu/mpc85xx/commproc.c
index aa8a5a5..3504d50 100644
--- a/cpu/mpc85xx/commproc.c
+++ b/cpu/mpc85xx/commproc.c
@@ -24,6 +24,8 @@
 #include <common.h>
 #include <asm/cpm_85xx.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_CPM2)
 /*
  * because we have stack and init data in dual port ram
@@ -35,8 +37,6 @@
 void
 m8560_cpm_reset(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	volatile ulong count;
 
@@ -64,8 +64,6 @@
 uint
 m8560_cpm_dpalloc(uint size, uint align)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	uint	retloc;
 	uint	align_mask, off;
@@ -122,8 +120,6 @@
 void
 m8560_cpm_setbrg(uint brg, uint rate)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	volatile uint	*bp;
 
@@ -146,8 +142,6 @@
 void
 m8560_cpm_fastbrg(uint brg, uint rate, int div16)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	volatile uint	*bp;
 
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index efde9cc..c12b47b 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -30,6 +30,8 @@
 #include <ioports.h>
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_CPM2
 static void config_8560_ioports (volatile immap_t * immr)
 {
@@ -103,7 +105,6 @@
 
 void cpu_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
 	extern void m8560_cpm_reset (void);
diff --git a/cpu/mpc85xx/serial_scc.c b/cpu/mpc85xx/serial_scc.c
index cf060d6..4e925f8 100644
--- a/cpu/mpc85xx/serial_scc.c
+++ b/cpu/mpc85xx/serial_scc.c
@@ -35,6 +35,8 @@
 #include <common.h>
 #include <asm/cpm_85xx.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_CPM2)
 #if defined(CONFIG_CONS_ON_SCC)
 
@@ -186,8 +188,6 @@
 void
 serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 #if defined(CONFIG_CONS_USE_EXTC)
 	m8560_cpm_extcbrg(SCC_INDEX, gd->baudrate,
 		CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index d736742..ca81ee7 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -29,6 +29,8 @@
 #include <ppc_asm.tmpl>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* --------------------------------------------------------------- */
 
 void get_sys_info (sys_info_t * sysInfo)
@@ -80,7 +82,6 @@
 
 int get_clocks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	sys_info_t sys_info;
 #if defined(CONFIG_CPM2)
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c
index a87eed2..904f052 100644
--- a/cpu/mpc85xx/traps.c
+++ b/cpu/mpc85xx/traps.c
@@ -39,6 +39,8 @@
 #include <command.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 int (*debugger_exception_handler)(struct pt_regs *) = 0;
 #endif
@@ -83,7 +85,6 @@
 void
 print_backtrace(unsigned long *sp)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int cnt = 0;
 	unsigned long i;
 
diff --git a/cpu/mpc8xx/commproc.c b/cpu/mpc8xx/commproc.c
index 75740e0..07c763c 100644
--- a/cpu/mpc8xx/commproc.c
+++ b/cpu/mpc8xx/commproc.c
@@ -24,12 +24,12 @@
 #include <common.h>
 #include <commproc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CFG_ALLOC_DPRAM
 
 int dpram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Reclaim the DP memory for our use. */
 	gd->dp_alloc_base = CPM_DATAONLY_BASE;
 	gd->dp_alloc_top  = CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE;
@@ -43,7 +43,6 @@
  */
 uint dpram_alloc (uint size)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	uint addr = gd->dp_alloc_base;
 
 	if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top)
@@ -56,8 +55,6 @@
 
 uint dpram_base (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	return gd->dp_alloc_base;
 }
 
@@ -67,8 +64,6 @@
  */
 uint dpram_alloc_align (uint size, uint align)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint addr, mask = align - 1;
 
 	addr = (gd->dp_alloc_base + mask) & ~mask;
@@ -83,8 +78,6 @@
 
 uint dpram_base_align (uint align)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint mask = align - 1;
 
 	return (gd->dp_alloc_base + mask) & ~mask;
diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
index c4a0cba..97112f0 100644
--- a/cpu/mpc8xx/cpu.c
+++ b/cpu/mpc8xx/cpu.c
@@ -39,6 +39,8 @@
 #include <mpc8xx.h>
 #include <asm/cache.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static char *cpu_warning = "\n         " \
 	"*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
 
@@ -349,8 +351,6 @@
 
 int checkcpu (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong clock = gd->cpu_clk;
 	uint immr = get_immr (0);	/* Return full IMMR contents */
 	uint pvr = get_pvr ();
@@ -539,8 +539,6 @@
  */
 unsigned long get_tbclk (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint immr = get_immr (0);	/* Return full IMMR contents */
 	volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000);
 	ulong oscclk, factor, pll;
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
index b2c59c6..1a7111f 100644
--- a/cpu/mpc8xx/cpu_init.c
+++ b/cpu/mpc8xx/cpu_init.c
@@ -27,6 +27,10 @@
 #include <mpc8xx.h>
 #include <commproc.h>
 
+#if defined(CFG_RTCSC) || defined(CFG_RMDS)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 #if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH)
 void cpm_load_patch (volatile immap_t * immr);
 #endif
@@ -259,8 +263,6 @@
 int cpu_init_r (void)
 {
 #if defined(CFG_RTCSC) || defined(CFG_RMDS)
-	DECLARE_GLOBAL_DATA_PTR;
-
 	bd_t *bd = gd->bd;
 	volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base);
 #endif
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index d2f5d88..6006478 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -27,6 +27,8 @@
 #include <net.h>
 #include <command.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef	ET_DEBUG
 
 #if (CONFIG_COMMANDS & CFG_CMD_NET) && \
@@ -371,7 +373,6 @@
 
 static void fec_pin_init(int fecidx)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	bd_t           *bd = gd->bd;
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 	volatile fec_t *fecp;
diff --git a/cpu/mpc8xx/i2c.c b/cpu/mpc8xx/i2c.c
index 682db53..6c59374 100644
--- a/cpu/mpc8xx/i2c.c
+++ b/cpu/mpc8xx/i2c.c
@@ -37,6 +37,8 @@
 #include <watchdog.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* define to enable debug messages */
 #undef	DEBUG_I2C
 
@@ -205,8 +207,6 @@
 void
 i2c_init(int speed, int slaveaddr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immap = (immap_t *)CFG_IMMR ;
 	volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
 	volatile i2c8xx_t *i2c	= (i2c8xx_t *)&immap->im_i2c;
@@ -615,8 +615,6 @@
 
 int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	i2c_state_t state;
 	uchar xaddr[4];
 	int rc;
@@ -671,8 +669,6 @@
 
 int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	i2c_state_t state;
 	uchar xaddr[4];
 	int rc;
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index fa0405f..26a82cc 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -27,6 +27,8 @@
 #include <serial.h>
 #include <watchdog.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if !defined(CONFIG_8xx_CONS_NONE)	/* No Console at all */
 
 #if defined(CONFIG_8xx_CONS_SMC1)	/* Console on SMC1 */
@@ -65,7 +67,6 @@
 
 static void serial_setdivisor(volatile cpm8xx_t *cp)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate;
 
 	if(divisor/16>0x1000) {
@@ -268,8 +269,6 @@
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
 #ifdef CONFIG_MODEM_SUPPORT
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (gd->be_quiet)
 		return;
 #endif
@@ -553,8 +552,6 @@
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
 #ifdef CONFIG_MODEM_SUPPORT
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (gd->be_quiet)
 		return;
 #endif
@@ -649,13 +646,11 @@
 #ifdef CONFIG_MODEM_SUPPORT
 void disable_putc(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	gd->be_quiet = 1;
 }
 
 void enable_putc(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	gd->be_quiet = 0;
 }
 #endif
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index f038316..57f91c0 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -25,6 +25,8 @@
 #include <mpc8xx.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CFG_MEASURE_CPUCLK) || defined(DEBUG)
 
 #define PITC_SHIFT 16
@@ -181,8 +183,6 @@
  */
 int get_clocks (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint immr = get_immr (0);	/* Return full IMMR contents */
 	volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
 	uint sccr = immap->im_clkrst.car_sccr;
@@ -238,8 +238,6 @@
  */
 int get_clocks_866 (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 	char		  tmp[64];
 	long		  cpuclk = 0;
@@ -277,8 +275,6 @@
  */
 int sdram_adjust_866 (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 	long		  mamr;
 
@@ -371,8 +367,6 @@
  */
 int adjust_sdram_tbs_8xx (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 	long		  mamr;
 	long              sccr;
diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c
index ee60477..918de67 100644
--- a/cpu/mpc8xx/video.c
+++ b/cpu/mpc8xx/video.c
@@ -39,6 +39,8 @@
 
 #ifdef CONFIG_VIDEO
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /************************************************************************/
 /* ** DEBUG SETTINGS							*/
 /************************************************************************/
@@ -1164,7 +1166,6 @@
 	u16 *screen = video_fb_address, width = VIDEO_COLS;
 #ifdef VIDEO_INFO
 # ifndef CONFIG_FADS
-	DECLARE_GLOBAL_DATA_PTR;
 	char temp[32];
 # endif
 	char info[80];
@@ -1282,8 +1283,6 @@
 
 int drv_video_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int error, devices = 1;
 
 	device_t videodev;
diff --git a/cpu/nios/serial.c b/cpu/nios/serial.c
index 4bdda25..5ecdc6d 100644
--- a/cpu/nios/serial.c
+++ b/cpu/nios/serial.c
@@ -26,6 +26,8 @@
 #include <watchdog.h>
 #include <nios-io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*------------------------------------------------------------------
  * JTAG acts as the serial port
  *-----------------------------------------------------------------*/
@@ -83,7 +85,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned div;
 
 	div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
diff --git a/cpu/nios2/serial.c b/cpu/nios2/serial.c
index 2d08c93..3d76603 100644
--- a/cpu/nios2/serial.c
+++ b/cpu/nios2/serial.c
@@ -27,6 +27,8 @@
 #include <nios2.h>
 #include <nios2-io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*------------------------------------------------------------------
  * JTAG acts as the serial port
  *-----------------------------------------------------------------*/
@@ -93,7 +95,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned div;
 
 	div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 947b85e..fad895b 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -77,6 +77,8 @@
 #include <asm/processor.h>
 #include <pci.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_405GP) || defined(CONFIG_405EP)
 
 #ifdef CONFIG_PCI
@@ -92,8 +94,6 @@
  *-----------------------------------------------------------------------------*/
 void pci_405gp_init(struct pci_controller *hose)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int i, reg_num = 0;
 	bd_t *bd = gd->bd;
 
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index a26533c..0cd72b0 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -37,6 +37,10 @@
 #include <asm/cache.h>
 #include <ppc4xx.h>
 
+#if !defined(CONFIG_405)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 
 #if defined(CONFIG_440)
 #define FREQ_EBC		(sys_info.freqEPB)
@@ -116,7 +120,6 @@
 int checkcpu (void)
 {
 #if !defined(CONFIG_405)	/* not used on Xilinx 405 FPGA implementations */
-	DECLARE_GLOBAL_DATA_PTR;
 	uint pvr = get_pvr();
 	ulong clock = gd->cpu_clk;
 	char buf[32];
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 79cfba3..1a139d7 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -27,6 +27,10 @@
 #include <asm/processor.h>
 #include <ppc4xx.h>
 
+#if defined(CONFIG_405GP)  || defined(CONFIG_405EP)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 
 #define mtebc(reg, data)  mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
 
@@ -209,8 +213,6 @@
 int cpu_init_r (void)
 {
 #if defined(CONFIG_405GP)  || defined(CONFIG_405EP)
-	DECLARE_GLOBAL_DATA_PTR;
-
 	bd_t *bd = gd->bd;
 	unsigned long reg;
 #if defined(CONFIG_405GP)
diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c
index be94b57..7db1cd8 100644
--- a/cpu/ppc4xx/i2c.c
+++ b/cpu/ppc4xx/i2c.c
@@ -16,6 +16,8 @@
 
 #ifdef CONFIG_HARD_I2C
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define IIC_OK		0
 #define IIC_NOK		1
 #define IIC_NOK_LA	2		/* Lost arbitration */
@@ -350,7 +352,6 @@
 {
 	uchar xaddr[4];
 	int ret;
-	DECLARE_GLOBAL_DATA_PTR;
 
 	if ( alen > 4 ) {
 		printf ("I2C read: addr len %d not supported\n", alen);
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 1d8dc7c..3aae4ce 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -36,6 +36,8 @@
 #include <commproc.h>
 #include "vecnum.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /****************************************************************************/
 
 /*
@@ -96,8 +98,6 @@
 
 int interrupt_init_cpu (unsigned *decrementer_count)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int vec;
 	unsigned long val;
 
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index e7f6bcb..83c9479 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -59,6 +59,8 @@
 #include <malloc.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*****************************************************************************/
 #ifdef CONFIG_IOP480
 
@@ -161,8 +163,6 @@
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile char val;
 	unsigned short br_reg;
 
@@ -185,8 +185,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned short br_reg;
 
 	br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
@@ -431,8 +429,6 @@
 int serial_init(void)
 #endif
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long reg;
 	unsigned long udiv;
 	unsigned short bdiv;
@@ -520,8 +516,6 @@
 int serial_init (void)
 #endif
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long reg;
 	unsigned long tmp;
 	unsigned long clk;
@@ -597,8 +591,6 @@
 void serial_setbrg (void)
 #endif
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long tmp;
 	unsigned long clk;
 	unsigned long udiv;
@@ -880,8 +872,6 @@
 #if (CONFIG_KGDB_SER_INDEX & 2)
 void kgdb_serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile char val;
 	unsigned short br_reg;
 
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 553c491..02b4383 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -26,7 +26,7 @@
 #include <ppc4xx.h>
 #include <asm/processor.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
 
 #define ONE_BILLION        1000000000
 
@@ -522,8 +522,6 @@
 int get_clocks (void)
 {
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405) || defined(CONFIG_405EP)
-	DECLARE_GLOBAL_DATA_PTR;
-
 	sys_info_t sys_info;
 
 	get_sys_info (&sys_info);
@@ -533,8 +531,6 @@
 #endif	/* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
 
 #ifdef CONFIG_IOP480
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->cpu_clk = 66000000;
 	gd->bus_clk = 66000000;
 #endif
diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c
index b33d674..0ee8180 100644
--- a/cpu/pxa/cpu.c
+++ b/cpu/pxa/cpu.c
@@ -34,14 +34,16 @@
 #include <command.h>
 #include <asm/arch/pxa-regs.h>
 
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 int cpu_init (void)
 {
 	/*
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
 	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
diff --git a/cpu/pxa/serial.c b/cpu/pxa/serial.c
index 9bf2a7c..cb3a478 100644
--- a/cpu/pxa/serial.c
+++ b/cpu/pxa/serial.c
@@ -32,10 +32,10 @@
 #include <watchdog.h>
 #include <asm/arch/pxa-regs.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned int quot = 0;
 
 	if (gd->baudrate == 1200)
diff --git a/cpu/s3c44b0/serial.c b/cpu/s3c44b0/serial.c
index 70b4ee8..95d0266 100644
--- a/cpu/s3c44b0/serial.c
+++ b/cpu/s3c44b0/serial.c
@@ -37,6 +37,8 @@
 #include <common.h>
 #include <asm/hardware.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* flush serial input queue. returns 0 on success or negative error
  * number otherwise
  */
@@ -68,8 +70,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	u32 divisor = 0;
 
 	/* get correct divisor */
diff --git a/cpu/sa1100/cpu.c b/cpu/sa1100/cpu.c
index 17e5b0d..f1bd644 100644
--- a/cpu/sa1100/cpu.c
+++ b/cpu/sa1100/cpu.c
@@ -33,14 +33,16 @@
 #include <common.h>
 #include <command.h>
 
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
 int cpu_init (void)
 {
 	/*
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
 	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
diff --git a/cpu/sa1100/serial.c b/cpu/sa1100/serial.c
index a598489..5d18875 100644
--- a/cpu/sa1100/serial.c
+++ b/cpu/sa1100/serial.c
@@ -31,10 +31,10 @@
 #include <common.h>
 #include <SA-1100.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned int reg = 0;
 
 	if (gd->baudrate == 1200)
diff --git a/drivers/netconsole.c b/drivers/netconsole.c
index 9a0a24f..69089f9 100644
--- a/drivers/netconsole.c
+++ b/drivers/netconsole.c
@@ -29,6 +29,8 @@
 #include <devices.h>
 #include <net.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static char input_buffer[512];
 static int input_size = 0;		/* char count in input buffer */
 static int input_offset = 0;		/* offset to valid chars in input buffer */
@@ -105,8 +107,6 @@
 
 static void nc_send_packet (const char *buf, int len)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	struct eth_device *eth;
 	int inited = 0;
 	uchar *pkt;
diff --git a/drivers/ns9750_serial.c b/drivers/ns9750_serial.c
index aced3da..8dff367 100644
--- a/drivers/ns9750_serial.c
+++ b/drivers/ns9750_serial.c
@@ -33,6 +33,8 @@
 #include "ns9750_bbus.h"	/* for GPIOs */
 #include "ns9750_ser.h"		/* for serial configuration */
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define CONSOLE CONFIG_CONS_INDEX
 
 static unsigned int calcBitrateRegister( void );
@@ -183,8 +185,6 @@
 
 static unsigned int calcBitrateRegister( void )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	return ( NS9750_SER_BITRATE_EBIT |
 		 NS9750_SER_BITRATE_CLKMUX_BCLK |
 		 NS9750_SER_BITRATE_TMODE |
@@ -204,8 +204,6 @@
 
 static unsigned int calcRxCharGapRegister( void )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	return NS9750_SER_RX_CHAR_TIMER_TRUN;
 }
 
diff --git a/drivers/ps2ser.c b/drivers/ps2ser.c
index e2a38dc..724fa40 100644
--- a/drivers/ps2ser.c
+++ b/drivers/ps2ser.c
@@ -21,6 +21,8 @@
 #include <asm/atomic.h>
 #include <ps2mult.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* #define	DEBUG */
 
 #define PS2SER_BAUD	57600
@@ -61,8 +63,6 @@
 #ifdef CONFIG_MPC5xxx
 int ps2ser_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
 	unsigned long baseclk;
 	int div;
diff --git a/drivers/s3c4510b_uart.c b/drivers/s3c4510b_uart.c
index 44b96a9..ddcd591 100644
--- a/drivers/s3c4510b_uart.c
+++ b/drivers/s3c4510b_uart.c
@@ -50,6 +50,8 @@
 #include <asm/hardware.h>
 #include "s3c4510b_uart.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static UART    *uart;
 
 /* flush serial input queue. returns 0 on success or negative error
@@ -82,8 +84,6 @@
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	UART_LINE_CTRL ulctrl;
 	UART_CTRL      uctrl;
 	UART_BAUD_DIV  ubd;
diff --git a/drivers/serial.c b/drivers/serial.c
index 057a1ab..228781b 100644
--- a/drivers/serial.c
+++ b/drivers/serial.c
@@ -30,6 +30,8 @@
 #include <ns87308.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if !defined(CONFIG_CONS_INDEX)
 #error	"No console index specified."
 #elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4)
@@ -77,7 +79,6 @@
 
 static int calc_divisor (NS16550_t port)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef CONFIG_OMAP1510
 	/* If can't cleanly clock 115200 set div to 1 */
 	if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
diff --git a/drivers/serial_max3100.c b/drivers/serial_max3100.c
index bbe212b..35c5596 100644
--- a/drivers/serial_max3100.c
+++ b/drivers/serial_max3100.c
@@ -28,6 +28,8 @@
 
 #ifdef CONFIG_MAX3100_SERIAL
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /**************************************************************/
 
 /* convienient macros */
@@ -217,7 +219,6 @@
 {
 	unsigned int wconf, rconf;
 	int i;
-	DECLARE_GLOBAL_DATA_PTR;
 
 	wconf = 0;
 
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 4c5e1b5..7ec565c 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -23,6 +23,8 @@
 #include "tsec.h"
 #include "miiphy.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define TX_BUF_CNT		2
 
 static uint rxIdx;	/* index of the current RX buffer */
@@ -1082,7 +1084,6 @@
 	struct phy_cmd **cmdlistptr;
 	struct phy_cmd *cmd;
 	int i,j,k;
-	DECLARE_GLOBAL_DATA_PTR;
 
 	for(i=0; phy_info[i]; i++) {
 		/* First thing's first: relocate the pointers to the
diff --git a/examples/mem_to_mem_idma2intr.c b/examples/mem_to_mem_idma2intr.c
index 3a269c9..3ff2804 100644
--- a/examples/mem_to_mem_idma2intr.c
+++ b/examples/mem_to_mem_idma2intr.c
@@ -30,6 +30,8 @@
 #include <common.h>
 #include <exports.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define STANDALONE
 
 #ifndef STANDALONE			/* Linked into/Part of  PPCBoot */
@@ -346,8 +348,6 @@
 
 uint dpalloc (uint size, uint align)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 	uint retloc;
 	uint align_mask, off;
diff --git a/examples/timer.c b/examples/timer.c
index 037fdfd..13ec06f 100644
--- a/examples/timer.c
+++ b/examples/timer.c
@@ -26,6 +26,8 @@
 #include <mpc8xx_irq.h>
 #include <exports.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef	DEBUG
 
 #define	TIMER_PERIOD	1000000		/* 1 second clock */
@@ -115,8 +117,6 @@
 
 int timer (int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	cpmtimer8xx_t *cpmtimerp;	/* Pointer to the CPM Timer structure   */
 	tid_8xx_cpmtimer_t hw;
 	tid_8xx_cpmtimer_t *hwp = &hw;
diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c
index dba2ff7..56b7fca 100644
--- a/lib_arm/armlinux.c
+++ b/lib_arm/armlinux.c
@@ -30,6 +30,8 @@
 #include <dataflash.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*cmd_boot.c*/
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
@@ -77,8 +79,6 @@
 void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 		     ulong addr, ulong *len_ptr, int verify)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong len = 0, checksum;
 	ulong initrd_start, initrd_end;
 	ulong data;
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 55d13fa..d9dc2b6 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -35,6 +35,8 @@
 #include "blackfin_board.h"
 #include "../drivers/smc91111.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern flash_info_t flash_info[];
 
 
@@ -76,8 +78,6 @@
 
 static int init_baudrate(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uchar tmp[64];
 	int i = getenv_r("baudrate", tmp, sizeof(tmp));
 	gd->bd->bi_baudrate = gd->baudrate = (i > 0)
@@ -89,7 +89,6 @@
 #ifdef DEBUG
 static void display_global_data(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	bd_t *bd;
 	bd = gd->bd;
 	printf("--flags:%x\n", gd->flags);
@@ -136,7 +135,6 @@
 
 void board_init_f(ulong bootflag)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong addr;
 	bd_t *bd;
 
@@ -173,7 +171,6 @@
 
 void board_init_r(gd_t * id, ulong dest_addr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong size;
 	extern void malloc_bin_reloc(void);
 	char *s, *e;
diff --git a/lib_i386/bios_setup.c b/lib_i386/bios_setup.c
index bc97815..75f04a0 100644
--- a/lib_i386/bios_setup.c
+++ b/lib_i386/bios_setup.c
@@ -36,6 +36,8 @@
 #include <asm/realmode.h>
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define NUMVECTS	256
 
 #define BIOS_DATA        ((char*)0x400)
@@ -136,7 +138,6 @@
 
 int bios_setup(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	static int done=0;
 	int vector;
 	struct pci_controller *pri_hose;
diff --git a/lib_i386/board.c b/lib_i386/board.c
index e90eb6e..4175fdb 100644
--- a/lib_i386/board.c
+++ b/lib_i386/board.c
@@ -38,6 +38,8 @@
 #include <ide.h>
 #include <asm/u-boot-i386.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern long _i386boot_start;
 extern long _i386boot_end;
 extern long _i386boot_romdata_start;
@@ -80,8 +82,6 @@
 
 static int mem_malloc_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* start malloc area right after the stack */
 	mem_malloc_start = i386boot_bss_start +
 		i386boot_bss_size + CFG_STACK_SIZE;
@@ -130,8 +130,6 @@
  */
 static int init_baudrate (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char tmp[64];	/* long enough for environment variables */
 	int i = getenv_r("baudrate", tmp, 64);
 
@@ -167,7 +165,6 @@
  */
 static int display_dram_config (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int i;
 
 	puts ("DRAM Configuration:\n");
@@ -233,7 +230,6 @@
 
 void start_i386boot (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	char *s;
 	int i;
 	ulong size;
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 6b3edd6..e25833b 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -60,6 +60,8 @@
 #include <i2c.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static char *failed = "*** failed ***\n";
 
 #ifdef	CONFIG_PCU_E
@@ -111,8 +113,6 @@
  */
 static void mem_malloc_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
 
 	mem_malloc_end = dest_addr;
@@ -177,8 +177,6 @@
 
 static int init_baudrate (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uchar tmp[64];	/* long enough for environment variables */
 	int i = getenv_r ("baudrate", tmp, sizeof (tmp));
 
@@ -192,8 +190,6 @@
 
 static int init_func_ram (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int board_type = 0;	/* use dummy arg */
 	puts ("DRAM:  ");
 
@@ -263,8 +259,6 @@
 void
 board_init_f (ulong bootflag)
 {
-    DECLARE_GLOBAL_DATA_PTR;
-
 	bd_t *bd;
 	ulong len, addr, addr_sp;
 	gd_t *id;
@@ -414,7 +408,6 @@
  */
 void board_init_r (gd_t *id, ulong dest_addr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	cmd_tbl_t *cmdtp;
 	char *s, *e;
 	bd_t *bd;
diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c
index a32de1a..f87f56e 100644
--- a/lib_m68k/m68k_linux.c
+++ b/lib_m68k/m68k_linux.c
@@ -27,6 +27,8 @@
 #include <zlib.h>
 #include <asm/byteorder.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define PHYSADDR(x) x
 
 #define LINUX_MAX_ENVS		256
@@ -56,8 +58,6 @@
 void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[],
 		     ulong addr, ulong * len_ptr, int verify)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong len = 0, checksum;
 	ulong initrd_start, initrd_end;
 	ulong data;
diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c
index bc987a3..026d247 100644
--- a/lib_microblaze/board.c
+++ b/lib_microblaze/board.c
@@ -28,6 +28,8 @@
 #include <version.h>
 #include <watchdog.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 const char version_string[] =
 	U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
 
@@ -72,8 +74,6 @@
 
 void board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
 
diff --git a/lib_mips/mips_linux.c b/lib_mips/mips_linux.c
index 12e8435..952d5a9 100644
--- a/lib_mips/mips_linux.c
+++ b/lib_mips/mips_linux.c
@@ -28,6 +28,8 @@
 #include <asm/byteorder.h>
 #include <asm/addrspace.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define	LINUX_MAX_ENVS		256
 #define	LINUX_MAX_ARGS		256
 
@@ -56,8 +58,6 @@
 void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[],
 		     ulong addr, ulong * len_ptr, int verify)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	ulong len = 0, checksum;
 	ulong initrd_start, initrd_end;
 	ulong data;
diff --git a/lib_nios/board.c b/lib_nios/board.c
index e6cda52..0a0d2e3 100644
--- a/lib_nios/board.c
+++ b/lib_nios/board.c
@@ -32,6 +32,7 @@
 #include <status_led.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * All attempts to come up with a "common" initialization sequence
@@ -106,8 +107,6 @@
 /***********************************************************************/
 void board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
 	char *s, *e;
diff --git a/lib_nios2/board.c b/lib_nios2/board.c
index 0e0b042..cd23037 100644
--- a/lib_nios2/board.c
+++ b/lib_nios2/board.c
@@ -32,6 +32,7 @@
 #include <status_led.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * All attempts to come up with a "common" initialization sequence
@@ -106,8 +107,6 @@
 /***********************************************************************/
 void board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
 	char *s, *e;
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index e569e97..e68cf1f 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -90,6 +90,7 @@
 #endif
 
 #include <environment.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CFG_ENV_IS_EMBEDDED)
diff --git a/net/net.c b/net/net.c
index 5062037..1d1c98f 100644
--- a/net/net.c
+++ b/net/net.c
@@ -92,6 +92,8 @@
 
 #if (CONFIG_COMMANDS & CFG_CMD_NET)
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define ARP_TIMEOUT		5		/* Seconds before trying ARP again */
 #ifndef	CONFIG_NET_RETRY_COUNT
 # define ARP_TIMEOUT_COUNT	5		/* # of timeouts before giving up  */
@@ -266,8 +268,6 @@
 int
 NetLoop(proto_t protocol)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	bd_t *bd = gd->bd;
 
 #ifdef CONFIG_NET_MULTI
@@ -572,9 +572,6 @@
 
 void NetStartAgain (void)
 {
-#ifdef	CONFIG_NET_MULTI
-	DECLARE_GLOBAL_DATA_PTR;
-#endif
 	char *nretry;
 	int noretry = 0, once = 0;
 
diff --git a/post/ether.c b/post/ether.c
index 660620e..8c87b59 100644
--- a/post/ether.c
+++ b/post/ether.c
@@ -51,6 +51,8 @@
 #include <net.h>
 #include <serial.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define MIN_PACKET_LENGTH	64
 #define MAX_PACKET_LENGTH	256
 #define TEST_NUM		1
@@ -109,7 +111,6 @@
 
 static void scc_init (int scc_index)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	bd_t *bd = gd->bd;
 
 	static int proff[] =
diff --git a/post/memory.c b/post/memory.c
index a10bc50..a2c088b 100644
--- a/post/memory.c
+++ b/post/memory.c
@@ -157,6 +157,8 @@
 
 #if CONFIG_POST & CFG_POST_MEMORY
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Define INJECT_*_ERRORS for testing error detection in the presence of
  * _good_ hardware.
@@ -455,7 +457,6 @@
 int memory_post_test (int flags)
 {
 	int ret = 0;
-	DECLARE_GLOBAL_DATA_PTR;
 	bd_t *bd = gd->bd;
 	unsigned long memsize = (bd->bi_memsize >= 256 << 20 ?
 				 256 << 20 : bd->bi_memsize) - (1 << 20);
diff --git a/post/post.c b/post/post.c
index b3df91a..e1066da 100644
--- a/post/post.c
+++ b/post/post.c
@@ -32,14 +32,14 @@
 
 #ifdef CONFIG_POST
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define POST_MAX_NUMBER		32
 
 #define BOOTMODE_MAGIC	0xDEAD0000
 
 int post_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int res = 0;
 	unsigned int i;
 
@@ -62,7 +62,6 @@
 
 void post_bootmode_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int bootmode = post_bootmode_get (0);
 	int newword;
 
@@ -110,20 +109,17 @@
 /* POST tests run before relocation only mark status bits .... */
 static void post_log_mark_start ( unsigned long testid )
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	gd->post_log_word |= (testid)<<16;
 }
 
 static void post_log_mark_succ ( unsigned long testid )
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	gd->post_log_word |= testid;
 }
 
 /* ... and the messages are output once we are relocated */
 void post_output_backlog ( void )
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int j;
 
 	for (j = 0; j < post_list_size; j++) {
@@ -379,8 +375,6 @@
 
 void post_reloc (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned int i;
 
 	/*
diff --git a/post/sysmon.c b/post/sysmon.c
index 72fcac3..f61d598 100644
--- a/post/sysmon.c
+++ b/post/sysmon.c
@@ -52,6 +52,8 @@
 
 #if CONFIG_POST & CFG_POST_SYSMON
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static int sysmon_temp_invalid = 0;
 
 /* #define DEBUG */
@@ -159,8 +161,6 @@
 
 void sysmon_reloc (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	sysmon_t ** l;
 	sysmon_table_t * t;
 
@@ -281,8 +281,6 @@
 
 int sysmon_post_test (int flags)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int res = 0;
 	sysmon_table_t * t;
 	uint val;
diff --git a/post/uart.c b/post/uart.c
index 23bf036..fd97e38 100644
--- a/post/uart.c
+++ b/post/uart.c
@@ -50,6 +50,8 @@
 #include <command.h>
 #include <serial.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define CTLR_SMC 0
 #define CTLR_SCC 1
 
@@ -82,8 +84,6 @@
 
 static void smc_init (int smc_index)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	static int cpm_cr_ch[] = { CPM_CR_CH_SMC1, CPM_CR_CH_SMC2 };
 
 	volatile immap_t *im = (immap_t *) CFG_IMMR;
@@ -288,8 +288,6 @@
 
 static void scc_init (int scc_index)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	static int cpm_cr_ch[] = {
 		CPM_CR_CH_SCC1,
 		CPM_CR_CH_SCC2,