sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
new file mode 100644
index 0000000..18e9851
--- /dev/null
+++ b/include/configs/ms7722se.h
@@ -0,0 +1,137 @@
+/*
+ * Configuation settings for the Hitachi Solution Engine 7722
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MS7722SE_H
+#define __MS7722SE_H
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH4 1
+#define CONFIG_CPU_SH7722 1
+#define CONFIG_MS7722SE 1
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_ENV
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.0.22
+#define CONFIG_SERVERIP 192.168.0.1
+#define CONFIG_GATEWAYIP 192.168.0.1
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/* SMC9111 */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE (0xB8000000)
+
+/* MEMORY */
+#define MS7722SE_SDRAM_BASE (0x8C000000)
+#define MS7722SE_FLASH_BASE_1 (0xA0000000)
+//#define MS7722SE_FLASH_BASE_1 (0xA1000000)
+#define MS7722SE_FLASH_BANK_SIZE (8*1024 * 1024)
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Buffer size for input from the Console */
+#define CFG_PBSIZE 256 /* Buffer size for Console output */
+#define CFG_MAXARGS 16 /* max args accepted for monitor commands */
+#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */
+#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */
+
+/* SCIF */
+#define CFG_SCIF_CONSOLE 1
+#define CONFIG_CONS_SCIF0 1
+#undef CFG_CONSOLE_INFO_QUIET /* Suppress display of console information at boot */
+#undef CFG_CONSOLE_OVERWRITE_ROUTINE
+#undef CFG_CONSOLE_ENV_OVERWRITE
+
+#define CFG_MEMTEST_START (MS7722SE_SDRAM_BASE)
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024))
+
+#undef CFG_ALT_MEMTEST /* Enable alternate, more extensive, memory test */
+#undef CFG_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */
+
+#undef CFG_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */
+
+#define CFG_SDRAM_BASE (MS7722SE_SDRAM_BASE)
+#define CFG_SDRAM_SIZE (64 * 1024 * 1024) /* maybe more, but if so u-boot doesn't know about it... */
+
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */
+
+#define CFG_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image
+ in Flash (NOT run time address in SDRAM) ?!? */
+#define CFG_MONITOR_LEN (128 * 1024) /* */
+#define CFG_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */
+#define CFG_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* FLASH */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef CFG_FLASH_QUIET_TEST
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */
+
+#define CFG_MAX_FLASH_SECT 150 /* Max number of sectors on each
+ Flash chip */
+
+/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
+#define CFG_MAX_FLASH_BANKS 2
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
+ CFG_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
+ }
+
+#define CFG_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash erase operations (in ms) */
+#define CFG_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */
+#define CFG_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */
+
+#undef CFG_FLASH_PROTECTION /* Use hardware flash sectors protection instead of U-Boot software protection */
+
+#undef CFG_DIRECT_FLASH_TFTP
+
+#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE 1
+#define CFG_ENV_SECT_SIZE (8 * 1024)
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + (1 * CFG_ENV_SECT_SIZE))
+#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) /* Offset of env Flash sector relative to CFG_FLASH_BASE */
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR_REDUND (CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE))
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 33333333
+#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+#endif /* __MS7722SE_H */
