mpc5xxx: Add MVBC_P board support
The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index a4581a3..5d11ef0 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -198,6 +198,35 @@
#define GPIO_PSC3_9 0x04000000UL
#define GPIO_PSC1_4 0x01000000UL
+#define MPC5XXX_GPIO_SIMPLE_PSC6_3 0x20000000UL
+#define MPC5XXX_GPIO_SIMPLE_PSC6_2 0x10000000UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_7 0x00002000UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_6 0x00001000UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_3 0x00000800UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_2 0x00000400UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_1 0x00000200UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_0 0x00000100UL
+#define MPC5XXX_GPIO_SIMPLE_PSC2_3 0x00000080UL
+#define MPC5XXX_GPIO_SIMPLE_PSC2_2 0x00000040UL
+#define MPC5XXX_GPIO_SIMPLE_PSC2_1 0x00000020UL
+#define MPC5XXX_GPIO_SIMPLE_PSC2_0 0x00000010UL
+#define MPC5XXX_GPIO_SIMPLE_PSC1_3 0x00000008UL
+#define MPC5XXX_GPIO_SIMPLE_PSC1_2 0x00000004UL
+#define MPC5XXX_GPIO_SIMPLE_PSC1_1 0x00000002UL
+#define MPC5XXX_GPIO_SIMPLE_PSC1_0 0x00000001UL
+
+#define MPC5XXX_GPIO_SINT_PSC3_5 0x02
+#define MPC5XXX_GPIO_SINT_PSC3_4 0x01
+
+#define MPC5XXX_GPIO_WKUP_7 0x80
+#define MPC5XXX_GPIO_WKUP_6 0x40
+#define MPC5XXX_GPIO_WKUP_PSC6_1 0x20
+#define MPC5XXX_GPIO_WKUP_PSC6_0 0x10
+#define MPC5XXX_GPIO_WKUP_ETH17 0x08
+#define MPC5XXX_GPIO_WKUP_PSC3_9 0x04
+#define MPC5XXX_GPIO_WKUP_PSC2_4 0x02
+#define MPC5XXX_GPIO_WKUP_PSC1_4 0x01
+
/* PCI registers */
#define MPC5XXX_PCI_CMD (MPC5XXX_PCI + 0x04)
#define MPC5XXX_PCI_CFG (MPC5XXX_PCI + 0x0c)
