| Overview |
| -------- |
| The LX2160A Reference Design (RDB) is a high-performance computing, |
| evaluation, and development platform that supports the QorIQ LX2160A |
| Layerscape Architecture processor and its personalities. |
| |
| LX2160A SoC Overview |
| -------------------------------------- |
| For details, please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc |
| |
| LX2160ARDB board Overview |
| ---------------------- |
| DDR Memory |
| Two ports of 72-bits (8-bits ECC) DDR4. |
| Each port supports four chip-selects and two DIMM |
| connectors. Data rate upto 3.2 GT/s. |
| |
| SERDES ports |
| Thress serdes controllers (24 lanes) |
| Serdes1: Supports two USXGMII connectors, each connected through |
| Aquantia AQR107 phy, two 25GbE SFP+ modules connected through an Inphi |
| IN112525 phy and one 40 GbE QSFP+ module connected through an Inphi |
| CS4223 phy. |
| |
| Serdes2: Supports one PCIe x4 (Gen1/2/3/4) connector, four SATA 3.0 |
| connectors |
| |
| Serdes3: Supports one PCIe x8 (Gen1/2/3/4) connector |
| |
| eSDHC |
| eSDHC1: Supports a SD connector for connecting SD cards |
| eSDHC2: Supports 128GB Micron MTFC128GAJAECE-IT eMMC |
| |
| Octal SPI (XSPI) |
| Supports two 64 MB onbpard octal SPI flash memories, one SPI emulator |
| for off-board emulation |
| |
| I2C All system devices on I2C1 multiplexed using PCA9547 multiplexer |
| Serial Ports |
| |
| USB 3.0 |
| Two high speed USB 3.0 ports. First USB 3.0 port configured as |
| Host with Type-A connector, second USB 3.0 port configured as OTG |
| with micro-AB connector |
| |
| Serial Ports Two UART ports |
| Ethernet Two RGMII interfaces |
| Debug ARM JTAG support |
| |
| Booting Options |
| --------------- |
| a) Flexspi boot |
| b) SD boot |
| |
| Memory map for Flexspi flash |
| ---------------------------- |
| Image Flash Offset |
| bl2_flexspi_nor.pbl (RCW+PBI+bl2.pbl) 0x00000000 |
| fip.bin (bl31 + bl33(u-boot) + |
| header for Secure-boot(secure-boot only)) 0x00100000 |
| Boot firmware Environment 0x00500000 |
| DDR PHY Firmware (fip_ddr_all.bin) 0x00800000 |
| DPAA2 MC Firmware 0x00A00000 |
| DPAA2 DPL 0x00D00000 |
| DPAA2 DPC 0x00E00000 |
| Kernel.itb 0x01000000 |
| |
| Memory map for sd card |
| ---------------------------- |
| Image SD card Offset |
| bl2_sd.pbl (RCW+PBI+bl2.pbl) 0x00008 |
| fip.bin (bl31 + bl33(u-boot) + |
| header for Secure-boot(secure-boot only)) 0x00800 |
| Boot firmware Environment 0x02800 |
| DDR PHY Firmware (fip_ddr_all.bin) 0x04000 |
| DPAA2 MC Firmware 0x05000 |
| DPAA2 DPL 0x06800 |
| DPAA2 DPC 0x07000 |
| Kernel.itb 0x08000 |
| |
| LX2160AQDS board Overview |
| ---------------------- |
| Various Mezzanine cards and their connection for different SERDES protocols is |
| as below: |
| |
| SERDES1 |CARDS |
| ----------------------------------------------------------------------- |
| 1 |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108) |
| |Connect I/O cable to IO_SLOT1(J110) |
| |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111) |
| |Connect I/O cable to IO_SLOT2(J113) |
| ------------------------------------------------------------------------ |
| 3 |Mezzanine:X-M11-USXGMII (29828) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108) |
| |Connect I/O cable to IO_SLOT1(J110) |
| |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111) |
| |Connect I/O cable to IO_SLOT2(J113) |
| ------------------------------------------------------------------------ |
| 7 |Mezzanine:X-M11-USXGMII (29828) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108) |
| |Connect I/O cable to IO_SLOT1(J110) |
| |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111) |
| |Connect I/O cable to IO_SLOT2(J113) |
| ------------------------------------------------------------------------ |
| 8 |Mezzanine:X-M12-XFI (29829) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108) |
| |Connect I/O cable to IO_SLOT1(J110) |
| |Mezzanine:X-M12-XFI (29829) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111) |
| |Connect I/O cable to IO_SLOT2(J113) |
| ------------------------------------------------------------------------ |
| 13 |Mezzanine:X-M8-100G (29734) |
| |Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108) |
| |Connect I/O cable to IO_SLOT1(J110) |
| |Mezzanine:X-M8-100G (29734) |
| |Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT2(J111) |
| |Connect I/O cable to IO_SLOT2(J113) |
| ------------------------------------------------------------------------ |
| 15 |Mezzanine:X-M8-100G (29734) |
| |Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108) |
| |Connect I/O cable to IO_SLOT1(J110) |
| |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111) |
| |Connect I/O cable to IO_SLOT2(J113) |
| ------------------------------------------------------------------------ |
| 17 |Mezzanine:X-M13-25G (32133) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108) |
| |Connect I/O cable to IO_SLOT1(J110) |
| |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111) |
| |Connect I/O cable to IO_SLOT2(J113) |
| ------------------------------------------------------------------------ |
| 19 |Mezzanine:X-M11-USXGMII (29828), X-M13-25G (32133) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108) |
| |Connect M11 I/O cable to IO_SLOT1(J110), M13 I/O cable to IO_SLOT6(J125) |
| |Mezzanine:X-M7-40G (29738) |
| |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT2 (J111) |
| |Connect I/O cable to IO_SLOT2(J113) |
| ------------------------------------------------------------------------ |
| 20 |Mezzanine:X-M7-40G (29738) |
| |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108) |
| |Connect I/O cable to IO_SLOT1(J108) |
| |Mezzanine:X-M7-40G (29738) |
| |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT2 (J111) |
| |Connect I/O cable to IO_SLOT2(J113) |
| ------------------------------------------------------------------------ |
| |
| |
| SERDES2 |CARDS |
| ----------------------------------------------------------------------- |
| 2 |Mezzanine:X-M6-PCIE-X8 (29737) * |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114) |
| |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT4 (J117) |
| |Connect I/O cable to IO_SLOT3(J116) |
| ------------------------------------------------------------------------ |
| 3 |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114) |
| |Connect I/O cable to IO_SLOT3(J116) |
| |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117) |
| |Connect I/O cable to IO_SLOT4(J119) |
| ------------------------------------------------------------------------ |
| 5 |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114) |
| |Connect I/O cable to IO_SLOT3(J116) |
| |Mezzanine:X-M5-SATA (29687) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117) |
| |Connect I/O cable to IO_SLOT4(J119) |
| ------------------------------------------------------------------------ |
| 11 |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114) |
| |Connect I/O cable to IO_SLOT7(J127) |
| |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117) |
| |Connect I/O cable to IO_SLOT8(J131) |
| ------------------------------------------------------------------------ |
| |
| |
| SERDES3 |CARDS |
| ----------------------------------------------------------------------- |
| 2 |Mezzanine:X-M6-PCIE-X8 (29737) * |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT5 (J120) |
| |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT6 (J123) |
| |Connect I/O cable to IO_SLOT5(J122) |
| ------------------------------------------------------------------------- |
| 3 |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT5 (J120) |
| |Connect I/O cable to IO_SLOT5(J122) |
| |Mezzanine:X-M4-PCIE-SGMII (29733) |
| |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT6 (J123) |
| |Connect I/O cable to IO_SLOT6(J125) |
| ------------------------------------------------------------------------- |
| |
