blob: 1a9ce2720acd4b25537d3163860d2f737084ab04 [file] [log] [blame]
/dts-v1/;
#include "tegra30.dtsi"
/ {
model = "Toradex Apalis T30";
compatible = "toradex,apalis_t30", "nvidia,tegra30";
chosen {
stdout-path = &uarta;
};
aliases {
i2c0 = "/i2c@7000d000";
i2c1 = "/i2c@7000c000";
i2c2 = "/i2c@7000c500";
i2c3 = "/i2c@7000c700";
mmc0 = "/sdhci@78000600";
mmc1 = "/sdhci@78000400";
mmc2 = "/sdhci@78000000";
spi0 = "/spi@7000d400";
spi1 = "/spi@7000dc00";
spi2 = "/spi@7000de00";
spi3 = "/spi@7000da00";
usb0 = "/usb@7d000000";
usb1 = "/usb@7d004000";
usb2 = "/usb@7d008000";
};
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>;
};
pcie-controller@00003000 {
status = "okay";
avdd-pexa-supply = <&vdd2_reg>;
vdd-pexa-supply = <&vdd2_reg>;
avdd-pexb-supply = <&vdd2_reg>;
vdd-pexb-supply = <&vdd2_reg>;
avdd-pex-pll-supply = <&vdd2_reg>;
avdd-plle-supply = <&ldo6_reg>;
vddio-pex-ctl-supply = <&sys_3v3_reg>;
hvdd-pex-supply = <&sys_3v3_reg>;
/* Apalis Type Specific 4 Lane PCIe */
pci@1,0 {
/* TS_DIFF1/2/3/4 left disabled */
nvidia,num-lanes = <4>;
};
/* Apalis PCIe */
pci@2,0 {
/* PCIE1_RX/TX left disabled */
nvidia,num-lanes = <1>;
};
/* I210 Gigabit Ethernet Controller (On-module) */
pci@3,0 {
status = "okay";
nvidia,num-lanes = <1>;
};
};
/*
* GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
* board)
*/
i2c@7000c000 {
status = "okay";
clock-frequency = <400000>;
};
/* GEN2_I2C: unused */
/*
* CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
* carrier board)
*/
i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
};
/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
i2c@7000c700 {
status = "okay";
clock-frequency = <10000>;
};
/*
* PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
* touch screen controller
*/
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
pmic: tps65911@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
#gpio-cells = <2>;
gpio-controller;
vcc1-supply = <&sys_3v3_reg>;
vcc2-supply = <&sys_3v3_reg>;
vcc3-supply = <&vio_reg>;
vcc4-supply = <&sys_3v3_reg>;
vcc5-supply = <&sys_3v3_reg>;
vcc6-supply = <&vio_reg>;
vcc7-supply = <&charge_pump_5v0_reg>;
vccio-supply = <&sys_3v3_reg>;
regulators {
/* SW1: +V1.35_VDDIO_DDR */
vdd1_reg: vdd1 {
regulator-name = "vddio_ddr_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
/* SW2: +V1.05 */
vdd2_reg: vdd2 {
regulator-name =
"vdd_pexa,vdd_pexb,vdd_sata";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
/* SW CTRL: +V1.0_VDD_CPU */
vddctrl_reg: vddctrl {
regulator-name = "vdd_cpu,vdd_sys";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
/* SWIO: +V1.8 */
vio_reg: vio {
regulator-name = "vdd_1v8_gen";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
/* LDO1: unused */
/*
* EN_+V3.3 switching via FET:
* +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
* see also v3_3 fixed supply
*/
ldo2_reg: ldo2 {
regulator-name = "en_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
/* +V1.2_CSI */
ldo3_reg: ldo3 {
regulator-name =
"avdd_dsi_csi,pwrdet_mipi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
/* +V1.2_VDD_RTC */
ldo4_reg: ldo4 {
regulator-name = "vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
/*
* +V2.8_AVDD_VDAC:
* only required for analog RGB
*/
ldo5_reg: ldo5 {
regulator-name = "avdd_vdac";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
/*
* +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
* but LDO6 can't set voltage in 50mV
* granularity
*/
ldo6_reg: ldo6 {
regulator-name = "avdd_plle";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
/* +V1.2_AVDD_PLL */
ldo7_reg: ldo7 {
regulator-name = "avdd_pll";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
/* +V1.0_VDD_DDR_HS */
ldo8_reg: ldo8 {
regulator-name = "vdd_ddr_hs";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
};
};
};
/* SPI1: Apalis SPI1 */
spi@7000d400 {
status = "okay";
spi-max-frequency = <25000000>;
};
/* SPI4: CAN2 */
spi@7000da00 {
status = "okay";
spi-max-frequency = <25000000>;
};
/* SPI5: Apalis SPI2 */
spi@7000dc00 {
status = "okay";
spi-max-frequency = <25000000>;
};
/* SPI6: CAN1 */
spi@7000de00 {
status = "okay";
spi-max-frequency = <25000000>;
};
sdhci@78000000 {
status = "okay";
bus-width = <4>;
/* SD1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
};
sdhci@78000400 {
status = "okay";
bus-width = <8>;
/* MMC1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
};
sdhci@78000600 {
status = "okay";
bus-width = <8>;
non-removable;
};
/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
usb@7d000000 {
status = "okay";
dr_mode = "otg";
/* USBO1_EN */
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
};
/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
usb@7d004000 {
status = "okay";
/* USBH_EN */
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
};
/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
usb@7d008000 {
status = "okay";
/* USBH_EN */
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clk@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
clk16m: clk@1 {
compatible = "fixed-clock";
reg=<1>;
#clock-cells = <0>;
clock-frequency = <16000000>;
clock-output-names = "clk16m";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
sys_3v3_reg: regulator@100 {
compatible = "regulator-fixed";
reg = <100>;
regulator-name = "3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
charge_pump_5v0_reg: regulator@101 {
compatible = "regulator-fixed";
reg = <101>;
regulator-name = "5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
};
&uarta {
status = "okay";
};