blob: 830251a5393cb8f413a97b94441dc58cfeac5284 [file] [log] [blame]
#include "skeleton.dtsi"
/ {
model = "Atmel SAMA5D2 family SoC";
compatible = "atmel,sama5d2";
aliases {
spi0 = &spi0;
spi1 = &qspi0;
i2c0 = &i2c0;
i2c1 = &i2c1;
};
clocks {
slow_xtal: slow_xtal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
main_xtal: main_xtal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
u-boot,dm-pre-reloc;
usb1: ohci@00400000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00400000 0x100000>;
clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
usb2: ehci@00500000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00500000 0x100000>;
clocks = <&utmi>, <&uhphs_clk>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
sdmmc0: sdio-host@a0000000 {
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
clock-names = "hclock", "multclk", "baseclk";
status = "disabled";
};
sdmmc1: sdio-host@b0000000 {
compatible = "atmel,sama5d2-sdhci";
reg = <0xb0000000 0x300>;
clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
clock-names = "hclock", "multclk", "baseclk";
status = "disabled";
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
u-boot,dm-pre-reloc;
hlcdc: hlcdc@f0000000 {
compatible = "atmel,at91sam9x5-hlcdc";
reg = <0xf0000000 0x2000>;
clocks = <&lcdc_clk>;
status = "disabled";
};
pmc: pmc@f0014000 {
compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
u-boot,dm-pre-reloc;
main: mainck {
compatible = "atmel,at91sam9x5-clk-main";
#clock-cells = <0>;
u-boot,dm-pre-reloc;
};
plla: pllack@0 {
compatible = "atmel,sama5d3-clk-pll";
#clock-cells = <0>;
clocks = <&main>;
reg = <0>;
atmel,clk-input-range = <12000000 12000000>;
#atmel,pll-clk-output-range-cells = <4>;
atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
u-boot,dm-pre-reloc;
};
plladiv: plladivck {
compatible = "atmel,at91sam9x5-clk-plldiv";
#clock-cells = <0>;
clocks = <&plla>;
};
audio_pll_frac: audiopll_fracck {
compatible = "atmel,sama5d2-clk-audio-pll-frac";
#clock-cells = <0>;
clocks = <&main>;
};
audio_pll_pad: audiopll_padck {
compatible = "atmel,sama5d2-clk-audio-pll-pad";
#clock-cells = <0>;
clocks = <&audio_pll_frac>;
};
audio_pll_pmc: audiopll_pmcck {
compatible = "atmel,sama5d2-clk-audio-pll-pmc";
#clock-cells = <0>;
clocks = <&audio_pll_frac>;
};
utmi: utmick {
compatible = "atmel,at91sam9x5-clk-utmi";
#clock-cells = <0>;
clocks = <&main>;
regmap-sfr = <&sfr>;
u-boot,dm-pre-reloc;
};
mck: masterck {
compatible = "atmel,at91sam9x5-clk-master";
#clock-cells = <0>;
clocks = <&main>, <&plladiv>, <&utmi>;
atmel,clk-output-range = <124000000 166000000>;
atmel,clk-divisors = <1 2 4 3>;
u-boot,dm-pre-reloc;
};
h32ck: h32mxck {
#clock-cells = <0>;
compatible = "atmel,sama5d4-clk-h32mx";
clocks = <&mck>;
u-boot,dm-pre-reloc;
};
usb: usbck {
compatible = "atmel,at91sam9x5-clk-usb";
#clock-cells = <0>;
clocks = <&plladiv>, <&utmi>;
};
prog: progck {
compatible = "atmel,at91sam9x5-clk-programmable";
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
clocks = <&main>, <&plladiv>, <&utmi>, <&mck>;
prog0: prog@0 {
#clock-cells = <0>;
reg = <0>;
};
prog1: prog@1 {
#clock-cells = <0>;
reg = <1>;
};
prog2: prog@2 {
#clock-cells = <0>;
reg = <2>;
};
};
systemck {
compatible = "atmel,at91rm9200-clk-system";
#address-cells = <1>;
#size-cells = <0>;
ddrck: ddrck@2 {
#clock-cells = <0>;
reg = <2>;
clocks = <&mck>;
};
lcdck: lcdck@3 {
#clock-cells = <0>;
reg = <3>;
clocks = <&mck>;
};
uhpck: uhpck@6 {
#clock-cells = <0>;
reg = <6>;
clocks = <&usb>;
};
udpck: udpck@7 {
#clock-cells = <0>;
reg = <7>;
clocks = <&usb>;
};
pck0: pck0@8 {
#clock-cells = <0>;
reg = <8>;
clocks = <&prog0>;
};
pck1: pck1@9 {
#clock-cells = <0>;
reg = <9>;
clocks = <&prog1>;
};
pck2: pck2@10 {
#clock-cells = <0>;
reg = <10>;
clocks = <&prog2>;
};
iscck: iscck@18 {
#clock-cells = <0>;
reg = <18>;
clocks = <&mck>;
};
};
periph32ck {
compatible = "atmel,at91sam9x5-clk-peripheral";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&h32ck>;
u-boot,dm-pre-reloc;
macb0_clk: macb0_clk@5 {
#clock-cells = <0>;
reg = <5>;
atmel,clk-output-range = <0 83000000>;
};
tdes_clk: tdes_clk@11 {
#clock-cells = <0>;
reg = <11>;
atmel,clk-output-range = <0 83000000>;
};
matrix1_clk: matrix1_clk@14 {
#clock-cells = <0>;
reg = <14>;
};
hsmc_clk: hsmc_clk@17 {
#clock-cells = <0>;
reg = <17>;
};
pioA_clk: pioA_clk@18 {
#clock-cells = <0>;
reg = <18>;
atmel,clk-output-range = <0 83000000>;
u-boot,dm-pre-reloc;
};
flx0_clk: flx0_clk@19 {
#clock-cells = <0>;
reg = <19>;
atmel,clk-output-range = <0 83000000>;
};
flx1_clk: flx1_clk@20 {
#clock-cells = <0>;
reg = <20>;
atmel,clk-output-range = <0 83000000>;
};
flx2_clk: flx2_clk@21 {
#clock-cells = <0>;
reg = <21>;
atmel,clk-output-range = <0 83000000>;
};
flx3_clk: flx3_clk@22 {
#clock-cells = <0>;
reg = <22>;
atmel,clk-output-range = <0 83000000>;
};
flx4_clk: flx4_clk@23 {
#clock-cells = <0>;
reg = <23>;
atmel,clk-output-range = <0 83000000>;
};
uart0_clk: uart0_clk@24 {
#clock-cells = <0>;
reg = <24>;
atmel,clk-output-range = <0 83000000>;
u-boot,dm-pre-reloc;
};
uart1_clk: uart1_clk@25 {
#clock-cells = <0>;
reg = <25>;
atmel,clk-output-range = <0 83000000>;
u-boot,dm-pre-reloc;
};
uart2_clk: uart2_clk@26 {
#clock-cells = <0>;
reg = <26>;
atmel,clk-output-range = <0 83000000>;
u-boot,dm-pre-reloc;
};
uart3_clk: uart3_clk@27 {
#clock-cells = <0>;
reg = <27>;
atmel,clk-output-range = <0 83000000>;
};
uart4_clk: uart4_clk@28 {
#clock-cells = <0>;
reg = <28>;
atmel,clk-output-range = <0 83000000>;
};
twi0_clk: twi0_clk@29 {
reg = <29>;
#clock-cells = <0>;
atmel,clk-output-range = <0 83000000>;
};
twi1_clk: twi1_clk@30 {
#clock-cells = <0>;
reg = <30>;
atmel,clk-output-range = <0 83000000>;
};
spi0_clk: spi0_clk@33 {
#clock-cells = <0>;
reg = <33>;
atmel,clk-output-range = <0 83000000>;
u-boot,dm-pre-reloc;
};
spi1_clk: spi1_clk@34 {
#clock-cells = <0>;
reg = <34>;
atmel,clk-output-range = <0 83000000>;
};
tcb0_clk: tcb0_clk@35 {
#clock-cells = <0>;
reg = <35>;
atmel,clk-output-range = <0 83000000>;
};
tcb1_clk: tcb1_clk@36 {
#clock-cells = <0>;
reg = <36>;
atmel,clk-output-range = <0 83000000>;
};
pwm_clk: pwm_clk@38 {
#clock-cells = <0>;
reg = <38>;
atmel,clk-output-range = <0 83000000>;
};
adc_clk: adc_clk@40 {
#clock-cells = <0>;
reg = <40>;
atmel,clk-output-range = <0 83000000>;
};
uhphs_clk: uhphs_clk@41 {
#clock-cells = <0>;
reg = <41>;
atmel,clk-output-range = <0 83000000>;
};
udphs_clk: udphs_clk@42 {
#clock-cells = <0>;
reg = <42>;
atmel,clk-output-range = <0 83000000>;
};
ssc0_clk: ssc0_clk@43 {
#clock-cells = <0>;
reg = <43>;
atmel,clk-output-range = <0 83000000>;
};
ssc1_clk: ssc1_clk@44 {
#clock-cells = <0>;
reg = <44>;
atmel,clk-output-range = <0 83000000>;
};
trng_clk: trng_clk@47 {
#clock-cells = <0>;
reg = <47>;
atmel,clk-output-range = <0 83000000>;
};
pdmic_clk: pdmic_clk@48 {
#clock-cells = <0>;
reg = <48>;
atmel,clk-output-range = <0 83000000>;
};
i2s0_clk: i2s0_clk@54 {
#clock-cells = <0>;
reg = <54>;
atmel,clk-output-range = <0 83000000>;
};
i2s1_clk: i2s1_clk@55 {
#clock-cells = <0>;
reg = <55>;
atmel,clk-output-range = <0 83000000>;
};
can0_clk: can0_clk@56 {
#clock-cells = <0>;
reg = <56>;
atmel,clk-output-range = <0 83000000>;
};
can1_clk: can1_clk@57 {
#clock-cells = <0>;
reg = <57>;
atmel,clk-output-range = <0 83000000>;
};
classd_clk: classd_clk@59 {
#clock-cells = <0>;
reg = <59>;
atmel,clk-output-range = <0 83000000>;
};
};
periph64ck {
compatible = "atmel,at91sam9x5-clk-peripheral";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mck>;
u-boot,dm-pre-reloc;
dma0_clk: dma0_clk@6 {
#clock-cells = <0>;
reg = <6>;
};
dma1_clk: dma1_clk@7 {
#clock-cells = <0>;
reg = <7>;
};
aes_clk: aes_clk@9 {
#clock-cells = <0>;
reg = <9>;
};
aesb_clk: aesb_clk@10 {
#clock-cells = <0>;
reg = <10>;
};
sha_clk: sha_clk@12 {
#clock-cells = <0>;
reg = <12>;
};
mpddr_clk: mpddr_clk@13 {
#clock-cells = <0>;
reg = <13>;
};
matrix0_clk: matrix0_clk@15 {
#clock-cells = <0>;
reg = <15>;
};
sdmmc0_hclk: sdmmc0_hclk@31 {
#clock-cells = <0>;
reg = <31>;
u-boot,dm-pre-reloc;
};
sdmmc1_hclk: sdmmc1_hclk@32 {
#clock-cells = <0>;
reg = <32>;
u-boot,dm-pre-reloc;
};
lcdc_clk: lcdc_clk@45 {
#clock-cells = <0>;
reg = <45>;
};
isc_clk: isc_clk@46 {
#clock-cells = <0>;
reg = <46>;
};
qspi0_clk: qspi0_clk@52 {
#clock-cells = <0>;
reg = <52>;
u-boot,dm-pre-reloc;
};
qspi1_clk: qspi1_clk@53 {
#clock-cells = <0>;
reg = <53>;
u-boot,dm-pre-reloc;
};
};
gck {
compatible = "atmel,sama5d2-clk-generated";
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
clocks = <&main>, <&plla>, <&utmi>, <&mck>;
u-boot,dm-pre-reloc;
sdmmc0_gclk: sdmmc0_gclk@31 {
#clock-cells = <0>;
reg = <31>;
u-boot,dm-pre-reloc;
};
sdmmc1_gclk: sdmmc1_gclk@32 {
#clock-cells = <0>;
reg = <32>;
u-boot,dm-pre-reloc;
};
tcb0_gclk: tcb0_gclk@35 {
#clock-cells = <0>;
reg = <35>;
atmel,clk-output-range = <0 83000000>;
};
tcb1_gclk: tcb1_gclk@36 {
#clock-cells = <0>;
reg = <36>;
atmel,clk-output-range = <0 83000000>;
};
pwm_gclk: pwm_gclk@38 {
#clock-cells = <0>;
reg = <38>;
atmel,clk-output-range = <0 83000000>;
};
pdmic_gclk: pdmic_gclk@48 {
#clock-cells = <0>;
reg = <48>;
};
i2s0_gclk: i2s0_gclk@54 {
#clock-cells = <0>;
reg = <54>;
};
i2s1_gclk: i2s1_gclk@55 {
#clock-cells = <0>;
reg = <55>;
};
can0_gclk: can0_gclk@56 {
#clock-cells = <0>;
reg = <56>;
atmel,clk-output-range = <0 80000000>;
};
can1_gclk: can1_gclk@57 {
#clock-cells = <0>;
reg = <57>;
atmel,clk-output-range = <0 80000000>;
};
classd_gclk: classd_gclk@59 {
#clock-cells = <0>;
reg = <59>;
atmel,clk-output-range = <0 100000000>;
};
};
};
qspi0: spi@f0020000 {
compatible = "atmel,sama5d2-qspi";
reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
reg-names = "qspi_base", "qspi_mmap";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&qspi0_clk>;
status = "disabled";
};
qspi1: spi@f0024000 {
compatible = "atmel,sama5d2-qspi";
reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
reg-names = "qspi_base", "qspi_mmap";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&qspi1_clk>;
status = "disabled";
};
spi0: spi@f8000000 {
compatible = "atmel,at91rm9200-spi";
reg = <0xf8000000 0x100>;
clocks = <&spi0_clk>;
clock-names = "spi_clk";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
macb0: ethernet@f8008000 {
compatible = "cdns,macb";
reg = <0xf8008000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&macb0_clk>, <&macb0_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
};
uart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x100>;
clocks = <&uart0_clk>;
clock-names = "usart";
status = "disabled";
};
uart1: serial@f8020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x100>;
clocks = <&uart1_clk>;
clock-names = "usart";
status = "disabled";
};
uart2: serial@f8024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x100>;
clocks = <&uart2_clk>;
clock-names = "usart";
status = "disabled";
};
i2c0: i2c@f8028000 {
compatible = "atmel,sama5d2-i2c";
reg = <0xf8028000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi0_clk>;
status = "disabled";
};
rstc@f8048000 {
compatible = "atmel,sama5d3-rstc";
reg = <0xf8048000 0x10>;
clocks = <&clk32k>;
};
shdwc@f8048010 {
compatible = "atmel,sama5d2-shdwc";
reg = <0xf8048010 0x10>;
clocks = <&clk32k>;
#address-cells = <1>;
#size-cells = <0>;
atmel,wakeup-rtc-timer;
};
pit: timer@f8048030 {
compatible = "atmel,at91sam9260-pit";
reg = <0xf8048030 0x10>;
clocks = <&h32ck>;
};
watchdog@f8048040 {
compatible = "atmel,sama5d4-wdt";
reg = <0xf8048040 0x10>;
clocks = <&clk32k>;
status = "disabled";
};
sfr: sfr@f8030000 {
compatible = "atmel,sama5d2-sfr", "syscon";
reg = <0xf8030000 0x98>;
};
sckc@f8048050 {
compatible = "atmel,at91sam9x5-sckc";
reg = <0xf8048050 0x4>;
slow_rc_osc: slow_rc_osc {
compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-accuracy = <250000000>;
atmel,startup-time-usec = <75>;
};
slow_osc: slow_osc {
compatible = "atmel,at91sam9x5-clk-slow-osc";
#clock-cells = <0>;
clocks = <&slow_xtal>;
atmel,startup-time-usec = <1200000>;
};
clk32k: slowck {
compatible = "atmel,at91sam9x5-clk-slow";
#clock-cells = <0>;
clocks = <&slow_rc_osc &slow_osc>;
};
};
spi1: spi@fc000000 {
compatible = "atmel,at91rm9200-spi";
reg = <0xfc000000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart3: serial@fc008000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfc008000 0x100>;
clocks = <&uart3_clk>;
clock-names = "usart";
status = "disabled";
};
i2c1: i2c@fc028000 {
compatible = "atmel,sama5d2-i2c";
reg = <0xfc028000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi1_clk>;
status = "disabled";
};
pioA: gpio@fc038000 {
compatible = "atmel,sama5d2-gpio";
reg = <0xfc038000 0x600>;
clocks = <&pioA_clk>;
gpio-controller;
#gpio-cells = <2>;
u-boot,dm-pre-reloc;
pinctrl {
compatible = "atmel,sama5d2-pinctrl";
u-boot,dm-pre-reloc;
};
};
};
};
onewire_tm: onewire {
compatible = "w1-gpio";
status = "disabled";
};
};