blob: 5695e9b758569234dd4dcb6ffeb7e0af39583f65 [file] [log] [blame]
/*
* Device Tree file for Marvell Armada XP theadorable board
*
* Copyright (C) 2013-2014 Marvell
*
* Lior Amsalem <alior@marvell.com>
* Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the default
* 0xd0000000). The 0xf1000000 is the default used by the recent,
* DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
* boards were delivered with an older version of the bootloader that
* left internal registers mapped at 0xd0000000. If you are in this
* situation, you should either update your bootloader (preferred
* solution) or the below Device Tree should be adjusted.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "armada-xp-mv78260.dtsi"
/ {
model = "Marvell Armada XP theadorable";
compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
spi0 = &spi0;
spi1 = &spi1;
ethernet0 = &eth0;
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x80000000>;
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
internal-regs {
serial@12000 {
status = "okay";
u-boot,dm-pre-reloc;
};
serial@12100 {
status = "okay";
};
serial@12200 {
status = "okay";
};
serial@12300 {
status = "okay";
};
sata@a0000 {
nr-ports = <2>;
status = "okay";
};
mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
};
ethernet@70000 {
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
};
usb@50000 {
status = "okay";
};
usb@51000 {
status = "okay";
};
spi0: spi@10600 {
status = "okay";
u-boot,dm-pre-reloc;
spi-flash@0 {
u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13", "jedec,spi-nor", "spi-flash";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <27777777>;
};
fpga@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-generic-device";
reg = <1>; /* Chip select 1 */
spi-max-frequency = <27777777>;
};
};
spi1: spi@10680 {
status = "okay";
fpga@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-generic-device";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <27777777>;
};
};
/* The LCD controller is only used on this board */
lcd0: lcd-controller@e0000 {
compatible = "marvell,armada-xp-lcd";
reg = <0xe0000 0x10000>;
status = "okay";
u-boot,dm-pre-reloc;
display-timings {
native-mode = <&timing0>;
timing0: panel0 {
hactive = <240>;
vactive = <320>;
hfront-porch = <1>;
hback-porch = <45>;
vfront-porch = <1>;
vback-porch = <3>;
/* Some dummy parameters */
clock-frequency = <0>;
hsync-len = <0>;
vsync-len = <0>;
};
};
};
};
};
};
&pciec {
status = "okay";
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@9,0 {
/* Port 2, Lane 0 */
status = "okay";
};
};