)]}'
{
  "commit": "1c84c215955909153855aaa0954cc33c92add85d",
  "tree": "58c12d54d322d2e9663dfd191fa1934725ce2042",
  "parents": [
    "f85ca242ff946c32ac6fb95d398b7676f3ed7f26"
  ],
  "author": {
    "name": "Jacky Bai",
    "email": "ping.bai@nxp.com",
    "time": "Fri May 24 10:08:05 2019 +0800"
  },
  "committer": {
    "name": "Ye Li",
    "email": "ye.li@nxp.com",
    "time": "Fri May 24 04:29:15 2019 -0700"
  },
  "message": "MLK-21821 ddr: imx8m: Fix the ddr init hang on imx8mq\n\nOn, i.MX8MQ, the PLL config must be done when ddrmix\nisolation is released. So move the dram pll init after\niso config done. For other i.MX8M SOC, either init pll\nbefore or after isolation is ok.\n\nSigned-off-by: Jacky Bai \u003cping.bai@nxp.com\u003e\n(cherry picked from commit c5dcc21c214badd5b48b48dfaa62d17ba13c6b17)\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "2b6b4e10e7ce8e12cfdecf5d7e6cd05fafd0bbbb",
      "old_mode": 33188,
      "old_path": "drivers/ddr/imx/imx8m/ddr_init.c",
      "new_id": "aceefdbd21acebb9c993970725d334a63ef8ea88",
      "new_mode": 33188,
      "new_path": "drivers/ddr/imx/imx8m/ddr_init.c"
    }
  ]
}