diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 001ece3..9dc5426 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -968,6 +968,18 @@
 	  development platform that supports the QorIQ LS1012A
 	  Layerscape Architecture processor.
 
+config TARGET_LS1012A2G5RDB
+	bool "Support ls1012a2g5rdb"
+	select ARCH_LS1012A
+	select ARM64
+	select BOARD_LATE_INIT
+	imply SCSI
+	help
+	  Support for Freescale LS1012A2G5RDB platform.
+	  The LS1012A 2G5 Reference design board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS1012A
+	  Layerscape Architecture processor.
+
 config TARGET_LS1012AFRDM
 	bool "Support ls1012afrdm"
 	select ARCH_LS1012A
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 12aba9d..3a0e129 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -85,11 +85,12 @@
 config PSCI_RESET
 	bool "Use PSCI for reset and shutdown"
 	default y
-	depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && !TARGET_LS2080A_EMU && \
+	depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
 		   !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
-		   !TARGET_LS2080ARDB && !TARGET_LS1012AQDS && \
+		   !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
 		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
 		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
+		   !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
 		   !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
 		   !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
 		   !TARGET_LS2081ARDB && \
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 1e0030c..70a6070 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -578,7 +578,7 @@
 #ifdef CONFIG_FSL_LSCH3
 	u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
 #endif
-#ifdef CONFIG_ARCH_LS2080A
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
 	u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
 	u32 svr_dev_id;
 #endif
@@ -597,7 +597,7 @@
 	out_le32(cltbenr, 0xf);
 #endif
 
-#ifdef CONFIG_ARCH_LS2080A
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
 	/*
 	 * In certain Layerscape SoCs, the clock for each core's
 	 * has an enable bit in the PMU Physical Core Time Base Enable
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e22b52c..26b2a52 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -209,6 +209,7 @@
 	fsl-ls1046a-rdb.dtb \
 	fsl-ls1012a-qds.dtb \
 	fsl-ls1012a-rdb.dtb \
+	fsl-ls1012a-2g5rdb.dtb \
 	fsl-ls1012a-frdm.dtb
 
 dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
diff --git a/arch/arm/dts/fsl-ls1012a-2g5rdb.dts b/arch/arm/dts/fsl-ls1012a-2g5rdb.dts
new file mode 100644
index 0000000..dbe01dd
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1012a-2g5rdb.dts
@@ -0,0 +1,43 @@
+/*
+ * NXP ls1012a 2G5RDB board device tree source
+ *
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A 2G5RDB Board";
+
+	aliases {
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = &duart0;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fl128s@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig
index 8a5c456..280f7d4 100644
--- a/board/freescale/common/Kconfig
+++ b/board/freescale/common/Kconfig
@@ -7,6 +7,8 @@
 	select SHA_HW_ACCEL
 	select SHA_PROG_HW_ACCEL
 	select ENV_IS_NOWHERE
+	select CMD_EXT4 if ARM
+	select CMD_EXT4_WRITE if ARM
 	bool
 	default y
 
diff --git a/board/freescale/common/cmd_esbc_validate.c b/board/freescale/common/cmd_esbc_validate.c
index b3e5f01..f45e224 100644
--- a/board/freescale/common/cmd_esbc_validate.c
+++ b/board/freescale/common/cmd_esbc_validate.c
@@ -23,6 +23,7 @@
 	return 0;
 }
 
+#ifndef CONFIG_SPL_BUILD
 static int do_esbc_validate(cmd_tbl_t *cmdtp, int flag, int argc,
 				char * const argv[])
 {
@@ -82,3 +83,4 @@
 	"Put the core in spin loop (Secure Boot Only)",
 	""
 );
+#endif
diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
index 0db0ed6..24459f8 100644
--- a/board/freescale/common/qixis.c
+++ b/board/freescale/common/qixis.c
@@ -10,6 +10,7 @@
 #include <common.h>
 #include <command.h>
 #include <asm/io.h>
+#include <linux/compiler.h>
 #include <linux/time.h>
 #include <i2c.h>
 #include "qixis.h"
@@ -136,12 +137,13 @@
 }
 #endif
 
-void qixis_reset(void)
+#ifndef CONFIG_SPL_BUILD
+static void qixis_reset(void)
 {
 	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET);
 }
 
-void qixis_bank_reset(void)
+static void qixis_bank_reset(void)
 {
 	QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE);
 	QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START);
@@ -196,15 +198,12 @@
 	printf("stat_alrm = %02x\n", QIXIS_READ(stat_alrm));
 }
 
-static void __qixis_dump_switch(void)
+void __weak qixis_dump_switch(void)
 {
 	puts("Reverse engineering switch is not implemented for this board\n");
 }
 
-void qixis_dump_switch(void)
-	__attribute__((weak, alias("__qixis_dump_switch")));
-
-int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int i;
 
@@ -305,3 +304,4 @@
 	"qixis_reset dump - display the QIXIS registers\n"
 	"qixis_reset switch - display switch\n"
 	);
+#endif
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
index 98231f9..d13b08e 100644
--- a/board/freescale/ls1012ardb/Kconfig
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -15,3 +15,21 @@
 source "board/freescale/common/Kconfig"
 
 endif
+
+if TARGET_LS1012A2G5RDB
+
+config SYS_BOARD
+        default "ls1012ardb"
+
+config SYS_VENDOR
+        default "freescale"
+
+config SYS_SOC
+        default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+        default "ls1012a2g5rdb"
+
+source "board/freescale/common/Kconfig"
+
+endif
diff --git a/board/freescale/ls1012ardb/MAINTAINERS b/board/freescale/ls1012ardb/MAINTAINERS
index 2cb38e7..a0a0d8d 100644
--- a/board/freescale/ls1012ardb/MAINTAINERS
+++ b/board/freescale/ls1012ardb/MAINTAINERS
@@ -8,3 +8,10 @@
 M:	Sumit Garg <sumit.garg@nxp.com>
 S:	Maintained
 F:	configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
+
+LS1012A2G5RDB BOARD
+M:      Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
+S:      Maintained
+F:      board/freescale/ls1012ardb/
+F:      include/configs/ls1012a2g5rdb.h
+F:      configs/ls1012a2g5rdb_qspi_defconfig
diff --git a/board/freescale/ls1012ardb/README b/board/freescale/ls1012ardb/README
index 453b4329..572fd8c 100644
--- a/board/freescale/ls1012ardb/README
+++ b/board/freescale/ls1012ardb/README
@@ -52,3 +52,46 @@
 U-boot Env 	| 1MB	| 0x4020_0000
 PPA FIT image	| 2MB	| 0x4050_0000
 Linux ITB	| ~53MB | 0x40A0_0000
+
+LS1012A2G5RDB board Overview
+-----------------------
+ - SERDES Connections, 3 lanes supporting:
+      - SGMII, SGMII 2.5
+      - SATA 3.0
+ - DDR Controller
+     - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s
+ -QSPI: A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select
+ signals to
+    - QSPI NOR flash memory
+ - USB 3.0
+    - one high-speed USB 2.0/3.0 port.
+ - SDIO WiFi, SPI
+ - 2 I2C controllers
+ - One SATA onboard connectors
+ - UART
+   - The LS1012A processor consists of two UART controllers,
+   out of which only UART1 is used on 2G5RDB.
+ - ARM JTAG support
+
+Major Difference between LS1012ARDB and LS1012A-2G5RDB
+------------------------------------------------------
+1. LS1012A-2G5RDB has Type C USB connector unlike USB Type A/B of LS1012ARDB
+2. LS1012A-2G5RDB has 2 2.5G AQR PHY unlike 2 1G Realtek RTL8211FS PHYs
+   of LS1012ARDB
+3. LS1012A-2G5RDB is not having Arduino header
+4. LS1012A-2G5RDB doesn't have PCI slot
+
+Booting Options
+---------------
+QSPI Flash
+
+QSPI flash map
+--------------
+Images		| Size	|QSPI Flash Address
+------------------------------------------
+RCW + PBI	| 1MB	| 0x4000_0000
+U-boot 		| 1MB	| 0x4010_0000
+U-boot Env 	| 1MB	| 0x4030_0000
+PPA FIT image	| 2MB	| 0x4040_0000
+PFE firmware	| 20K	| 0x00a0_0000
+Linux ITB	| ~53MB | 0x4100_0000
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
index 286f9d8..c9557bb 100644
--- a/board/freescale/ls1012ardb/ls1012ardb.c
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -28,6 +28,7 @@
 
 int checkboard(void)
 {
+#ifdef CONFIG_TARGET_LS1012ARDB
 	u8 in1;
 
 	puts("Board: LS1012ARDB ");
@@ -77,7 +78,10 @@
 		puts(": bank2\n");
 	else
 		puts("unknown\n");
+#else
 
+	puts("Board: LS1012A2G5RDB ");
+#endif
 	return 0;
 }
 
@@ -150,6 +154,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_TARGET_LS1012ARDB
 int esdhc_status_fixup(void *blob, const char *compat)
 {
 	char esdhc1_path[] = "/soc/esdhc@1580000";
@@ -193,7 +198,6 @@
 		if (mux_sdhc2 == 2 || mux_sdhc2 == 0)
 			sdhc2_en = true;
 	}
-
 	if (sdhc2_en)
 		do_fixup_by_path(blob, esdhc1_path, "status", "okay",
 				 sizeof("okay"), 1);
@@ -202,6 +206,7 @@
 				 sizeof("disabled"), 1);
 	return 0;
 }
+#endif
 
 int ft_board_setup(void *blob, bd_t *bd)
 {
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 2da0677..622a500 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -92,9 +92,7 @@
 };
 
 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
-static void convert_serdes_mux(int type, int need_reset);
-
-void cpld_show(void)
+static void cpld_show(void)
 {
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
 
@@ -292,6 +290,47 @@
 }
 
 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
+static void convert_serdes_mux(int type, int need_reset)
+{
+	char current_serdes;
+	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+	current_serdes = cpld_data->serdes_mux;
+
+	switch (type) {
+	case LANEB_SATA:
+		current_serdes &= ~MASK_LANE_B;
+		break;
+	case LANEB_SGMII1:
+		current_serdes |= (MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
+		break;
+	case LANEC_SGMII1:
+		current_serdes &= ~(MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
+		break;
+	case LANED_SGMII2:
+		current_serdes |= MASK_LANE_D;
+		break;
+	case LANEC_PCIEX1:
+		current_serdes |= MASK_LANE_C;
+		break;
+	case (LANED_PCIEX2 | LANEC_PCIEX1):
+		current_serdes |= MASK_LANE_C;
+		current_serdes &= ~MASK_LANE_D;
+		break;
+	default:
+		printf("CPLD serdes MUX: unsupported MUX type 0x%x\n", type);
+		return;
+	}
+
+	cpld_data->soft_mux_on |= CPLD_SET_MUX_SERDES;
+	cpld_data->serdes_mux = current_serdes;
+
+	if (need_reset == 1) {
+		printf("Reset board to enable configuration\n");
+		cpld_data->system_rst = CONFIG_RESET;
+	}
+}
+
 int config_serdes_mux(void)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@@ -584,7 +623,8 @@
 	return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
 }
 
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) \
+	&& !defined(CONFIG_SPL_BUILD)
 static void convert_flash_bank(char bank)
 {
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
@@ -645,48 +685,7 @@
 
 );
 
-static void convert_serdes_mux(int type, int need_reset)
-{
-	char current_serdes;
-	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
-	current_serdes = cpld_data->serdes_mux;
-
-	switch (type) {
-	case LANEB_SATA:
-		current_serdes &= ~MASK_LANE_B;
-		break;
-	case LANEB_SGMII1:
-		current_serdes |= (MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
-		break;
-	case LANEC_SGMII1:
-		current_serdes &= ~(MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
-		break;
-	case LANED_SGMII2:
-		current_serdes |= MASK_LANE_D;
-		break;
-	case LANEC_PCIEX1:
-		current_serdes |= MASK_LANE_C;
-		break;
-	case (LANED_PCIEX2 | LANEC_PCIEX1):
-		current_serdes |= MASK_LANE_C;
-		current_serdes &= ~MASK_LANE_D;
-		break;
-	default:
-		printf("CPLD serdes MUX: unsupported MUX type 0x%x\n", type);
-		return;
-	}
-
-	cpld_data->soft_mux_on |= CPLD_SET_MUX_SERDES;
-	cpld_data->serdes_mux = current_serdes;
-
-	if (need_reset == 1) {
-		printf("Reset board to enable configuration\n");
-		cpld_data->system_rst = CONFIG_RESET;
-	}
-}
-
-void print_serdes_mux(void)
+static void print_serdes_mux(void)
 {
 	char current_serdes;
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index ee0f3a2..d781e3e 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -71,11 +71,10 @@
 #ifdef CONFIG_TARGET_LS2081ARDB
 #ifdef CONFIG_FSL_QIXIS
 	sw = QIXIS_READ(arch);
-	printf("Board Arch: V%d, ", sw >> 4);
 	printf("Board version: %c, ", (sw & 0xf) + 'A');
 
 	sw = QIXIS_READ(brdcfg[0]);
-	sw = (sw & QIXIS_QMAP_MASK) >> QIXIS_QMAP_SHIFT;
+	sw = (sw >> QIXIS_QMAP_SHIFT) & QIXIS_QMAP_MASK;
 	switch (sw) {
 	case 0:
 		puts("boot from QSPI DEV#0\n");
@@ -101,6 +100,7 @@
 		printf("invalid setting of SW%u\n", sw);
 		break;
 	}
+	printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
 #endif
 	puts("SERDES1 Reference : ");
 	printf("Clock1 = 100MHz ");
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index aa04e99..a5d85c2 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -550,6 +550,7 @@
 	return 0;
 }
 
+#ifndef CONFIG_SPL_BUILD
 static int pin_mux_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
 				char * const argv[])
 {
@@ -569,3 +570,4 @@
 	"configure multiplexing pin for IFC/SDHC bus in runtime",
 	"bus_type (e.g. mux sdhc)"
 );
+#endif
diff --git a/configs/ls1012a2g5rdb_qspi_defconfig b/configs/ls1012a2g5rdb_qspi_defconfig
new file mode 100644
index 0000000..140a4e1
--- /dev/null
+++ b/configs/ls1012a2g5rdb_qspi_defconfig
@@ -0,0 +1,40 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012A2G5RDB=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-2g5rdb"
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig
index 0ba6981..659bc4f 100644
--- a/configs/ls1088aqds_sdcard_qspi_defconfig
+++ b/configs/ls1088aqds_sdcard_qspi_defconfig
@@ -23,6 +23,7 @@
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
@@ -35,6 +36,17 @@
 CONFIG_SPI_FLASH=y
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
 CONFIG_SYS_NS16550=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig
index 77e6f0a..2e3c287 100644
--- a/configs/ls1088ardb_sdcard_qspi_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_defconfig
@@ -24,6 +24,7 @@
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_MMC=y
@@ -34,6 +35,17 @@
 CONFIG_SPI_FLASH=y
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
 CONFIG_SYS_NS16550=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c
index 382f8ba..536d30f 100644
--- a/drivers/serial/serial_lpuart.c
+++ b/drivers/serial/serial_lpuart.c
@@ -265,11 +265,9 @@
 
 	lpuart_read32(plat->flags, &base->data, &val);
 
-	if (plat->devtype & DEV_MX7ULP) {
-		lpuart_read32(plat->flags, &base->stat, &stat);
-		if (stat & STAT_OR)
-			lpuart_write32(plat->flags, &base->stat, STAT_OR);
-	}
+	lpuart_read32(plat->flags, &base->stat, &stat);
+	if (stat & STAT_OR)
+		lpuart_write32(plat->flags, &base->stat, STAT_OR);
 
 	return val & 0x3ff;
 }
@@ -280,10 +278,8 @@
 	struct lpuart_fsl_reg32 *base = plat->reg;
 	u32 stat;
 
-	if (plat->devtype & DEV_MX7ULP) {
-		if (c == '\n')
-			serial_putc('\r');
-	}
+	if (c == '\n')
+		serial_putc('\r');
 
 	while (true) {
 		lpuart_read32(plat->flags, &base->stat, &stat);
@@ -330,7 +326,7 @@
 
 	lpuart_write32(plat->flags, &base->match, 0);
 
-	if (plat->devtype & DEV_MX7ULP) {
+	if (plat->devtype == DEV_MX7ULP) {
 		_lpuart32_serial_setbrg_7ulp(plat, gd->baudrate);
 	} else {
 		/* provide data bits, parity, stop bit, etc */
@@ -347,7 +343,7 @@
 	struct lpuart_serial_platdata *plat = dev->platdata;
 
 	if (is_lpuart32(dev)) {
-		if (plat->devtype & DEV_MX7ULP)
+		if (plat->devtype == DEV_MX7ULP)
 			_lpuart32_serial_setbrg_7ulp(plat, baudrate);
 		else
 			_lpuart32_serial_setbrg(plat, baudrate);
diff --git a/env/sf.c b/env/sf.c
index e51b1ae..a2e4c93 100644
--- a/env/sf.c
+++ b/env/sf.c
@@ -34,6 +34,7 @@
 
 #ifndef CONFIG_SPL_BUILD
 #define CMD_SAVEENV
+#define INITENV
 #endif
 
 #ifdef CONFIG_ENV_OFFSET_REDUND
@@ -348,6 +349,23 @@
 }
 #endif
 
+#if defined(INITENV) && defined(CONFIG_ENV_ADDR)
+static int env_sf_init(void)
+{
+	env_t *env_ptr = (env_t *)(CONFIG_ENV_ADDR);
+
+	if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) {
+		gd->env_addr	= (ulong)&(env_ptr->data);
+		gd->env_valid	= 1;
+	} else {
+		gd->env_addr = (ulong)&default_environment[0];
+		gd->env_valid = 1;
+	}
+
+	return 0;
+}
+#endif
+
 U_BOOT_ENV_LOCATION(sf) = {
 	.location	= ENVL_SPI_FLASH,
 	ENV_NAME("SPI Flash")
@@ -355,4 +373,7 @@
 #ifdef CMD_SAVEENV
 	.save		= env_save_ptr(env_sf_save),
 #endif
+#if defined(INITENV) && defined(CONFIG_ENV_ADDR)
+	.init		= env_sf_init,
+#endif
 };
diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
new file mode 100644
index 0000000..25df103
--- /dev/null
+++ b/include/configs/ls1012a2g5rdb.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1012A2G5RDB_H__
+#define __LS1012A2G5RDB_H__
+
+#include "ls1012a_common.h"
+
+/* PFE Ethernet */
+#ifdef CONFIG_FSL_PFE
+#define EMAC1_PHY_ADDR          0x2
+#define EMAC2_PHY_ADDR          0x1
+#define CONFIG_PHYLIB
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_AQUANTIA
+#endif
+
+/* DDR */
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	1
+#define CONFIG_NR_DRAM_BANKS		2
+#define CONFIG_SYS_SDRAM_SIZE		0x40000000
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+/*  MMC  */
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#endif
+
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+
+#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_NET_MULTI
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"verify=no\0"				\
+	"fdt_high=0xffffffffffffffff\0"		\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"fdt_addr=0x00f00000\0"			\
+	"kernel_addr=0x01000000\0"		\
+	"kernelheader_addr=0x800000\0"		\
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x81000000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"console=ttyS0,115200\0"		\
+	BOOTENV					\
+	"boot_scripts=ls1012ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1012ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+	     "part list ${devtype} ${devnum} devplist; "	\
+	     "env exists devplist || setenv devplist 1; "	\
+	     "for distro_bootpart in ${devplist}; do "		\
+		  "if fstype ${devtype} "			\
+		      "${devnum}:${distro_bootpart} "		\
+		      "bootfstype; then "			\
+		      "run scan_dev_for_boot; "	\
+		  "fi; "			\
+	      "done\0"				\
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"installer=load mmc 0:2 $load_addr "	\
+		   "/flex_installer_arm64.itb; "	\
+		   "bootm $load_addr#$board\0"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
+		"sf probe && sf read $load_addr "	\
+		"$kernel_addr $kernel_size; env exists secureboot "	\
+		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
+			   "env exists secureboot && esbc_halt;"
+#endif
+
+#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
+#define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LS1012A2G5RDB_H__ */
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 9cbc624..7dbe231 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -69,6 +69,16 @@
 #define CONFIG_ENV_SECT_SIZE		0x40000
 #endif
 
+/* SATA */
+#define CONFIG_SCSI_AHCI_PLAT
+
+#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
@@ -90,6 +100,7 @@
 #include <config_distro_defaults.h>
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
+	func(SCSI, scsi, 0) \
 	func(MMC, mmc, 0) \
 	func(USB, usb, 0)
 #include <config_distro_bootcmd.h>
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index bf4262a..e1767ef 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -113,16 +113,6 @@
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
-
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 
 #define CONFIG_PCI_SCAN_SHOW
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index ab139b0..438b5a6 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -46,15 +46,6 @@
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 5c2ad69..bef4dd4 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -145,6 +145,18 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
+/* SATA */
+#ifndef SPL_NO_SATA
+#define CONFIG_SCSI_AHCI_PLAT
+
+#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
 /* Command line configuration */
 
 /* MMC */
@@ -197,6 +209,7 @@
 #include <config_distro_defaults.h>
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
+	func(SCSI, scsi, 0) \
 	func(MMC, mmc, 0) \
 	func(USB, usb, 0)
 #include <config_distro_bootcmd.h>
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index c3b0f4d..456f61a 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -136,9 +136,6 @@
 #define CFG_LPUART_EN		0x2
 #endif
 
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
 /* EEPROM */
 #define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
@@ -148,13 +145,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 
-#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
-
 /*
  * IFC Definitions
  */
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 793e675..2755f1c 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -211,18 +211,6 @@
 #endif
 #endif
 
-/* SATA */
-#ifndef SPL_NO_SATA
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
-#endif
-
 #ifndef SPL_NO_MISC
 #undef CONFIG_BOOTCOMMAND
 #if defined(CONFIG_QSPI_BOOT)
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index e684884..61c30c9 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -45,6 +45,12 @@
 
 #define CONFIG_SUPPORT_RAW_INITRD
 
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_FSL_QSPI_BASE	0x20000000
+#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FSL_QSPI_BASE + \
+						CONFIG_ENV_OFFSET)
+#endif
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index e7e3afe..8fbf890 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -21,7 +21,6 @@
 
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE		0x40000
 #elif defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 3c6c666..d0066e3 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -17,7 +17,6 @@
 
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE		0x40000
 #elif defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)