#!/usr/bin/make -f
# -*- makefile -*-

# Uncomment this to turn on verbose mode.
# export DH_VERBOSE=1

IMX_FIRMWARE_DIR=/usr/share/imx-firmware/imx8m

%:
	dh $@

override_dh_auto_build:
	dh_auto_build -- CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm mx8mq_phanbell_defconfig _all

	objcopy -I binary -O binary --pad-to 0x4000 --gap-fill 0x0 $(IMX_FIRMWARE_DIR)/lpddr4_pmu_train_1d_dmem.bin lpddr4_pmu_train_1d_dmem_pad.bin
	objcopy -I binary -O binary --pad-to 0x8000 --gap-fill 0x0 $(IMX_FIRMWARE_DIR)/lpddr4_pmu_train_1d_imem.bin lpddr4_pmu_train_1d_imem_pad.bin
	objcopy -I binary -O binary --pad-to 0x8000 --gap-fill 0x0 $(IMX_FIRMWARE_DIR)/lpddr4_pmu_train_2d_imem.bin lpddr4_pmu_train_2d_imem_pad.bin

	cat lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin > lpddr4_pmu_train_1d_fw.bin
	cat lpddr4_pmu_train_2d_imem_pad.bin $(IMX_FIRMWARE_DIR)/lpddr4_pmu_train_2d_dmem.bin > lpddr4_pmu_train_2d_fw.bin
	cat spl/u-boot-spl.bin lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin > u-boot-spl-ddr.bin

	bash /usr/bin/mkimage_fit_atf.sh \
		/usr/share/imx-atf/bl31.bin \
		u-boot-nodtb.bin \
		arch/arm/dts/fsl-imx8mq-phanbell.dtb > u-boot.its
	tools/mkimage -E -p 0x3000 -f u-boot.its u-boot.itb

	$(IMX_FIRMWARE_DIR)/mkimage_imx8 -fit \
		-signed_hdmi $(IMX_FIRMWARE_DIR)/signed_hdmi_imx8m.bin \
		-loader u-boot-spl-ddr.bin 0x7E1000 \
		-second_loader u-boot.itb 0x40200000 0x60000 \
		-out u-boot.imx

override_dh_install:
	install -d debian/uboot-imx/boot
	install -m 644 -o 0 -g 0 u-boot.imx debian/uboot-imx/boot/u-boot.imx