// SPDX-License-Identifier: GPL-2.0

#include <clk.h>
#include <common.h>
#include <dm.h>
#include <dt-bindings/clock/mt8516-clk.h>

#include "musb_core.h"

#define USB_L1INTS (0x00a0)	/* USB level 1 interrupt status register */
#define USB_L1INTM (0x00a4)	/* USB level 1 interrupt mask register  */
#define USB_L1INTP (0x00a8)	/* USB level 1 interrupt polarity register  */
#define TX_INT_STATUS        (1<<0)
#define RX_INT_STATUS        (1<<1)
#define USBCOM_INT_STATUS    (1<<2)
#define DMA_INT_STATUS       (1<<3)
#define PSR_INT_STATUS       (1<<4)
#define QINT_STATUS          (1<<5)
#define QHIF_INT_STATUS      (1<<6)
#define DPDM_INT_STATUS      (1<<7)
#define VBUSVALID_INT_STATUS (1<<8)
#define IDDIG_INT_STATUS     (1<<9)
#define DRVVBUS_INT_STATUS   (1<<10)

/*EP Fifo Config*/
static struct musb_fifo_cfg fifo_cfg[] __initdata = {
{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE},
{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE},
{ .hw_ep_num =	2, .style = FIFO_RX,	.maxpacket = 512, .mode = BUF_DOUBLE},
{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE},
{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE},
{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE},
{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE},
{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE},
{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_SINGLE},
{ .hw_ep_num =	5, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_SINGLE},
{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_SINGLE},
{ .hw_ep_num =	6, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_SINGLE},
{ .hw_ep_num =	7, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_SINGLE},
{ .hw_ep_num =	7, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_SINGLE},
{ .hw_ep_num =	8, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE},
{ .hw_ep_num =	8, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE},
};

static struct musb_hdrc_config mt8xx_musb_hdrc_config = {
	.multipoint	= true,
	.dyn_fifo	= true,
	.num_eps	= 16,
	.ram_bits	= 16,
	.fifo_cfg	= fifo_cfg,
	.fifo_cfg_size	= ARRAY_SIZE(fifo_cfg),
};

struct omap_musb_board_data {
	u8 interface_type;
	struct udevice *dev;
	void (*set_phy_power)(struct udevice *dev, u8 on);
	void (*clear_irq)(struct udevice *dev);
	void (*reset)(struct udevice *dev);
};

struct mt8xx_glue {
	struct device		*dev;
	struct platform_device	*usb_phy;

	void *base;
	struct musb	*musb;
	struct omap_musb_board_data otg_board_data;
	struct musb_hdrc_platform_data musb_pdata;
};
#define glue_to_musb(g)	platform_get_drvdata(g->musb)

static irqreturn_t mt8xx_musb_interrupt(int irq, void *__hci)
{
	unsigned long   flags;
	irqreturn_t     retval = IRQ_NONE;
	struct musb     *musb = __hci;
	u32 l1ints, l1intm;

	l1ints = musb_readl(musb->mregs, USB_L1INTS);
	l1intm = musb_readl(musb->mregs, USB_L1INTM);

	if (!(l1ints & l1intm))
		return IRQ_HANDLED;

	spin_lock_irqsave(&musb->lock, flags);

	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
	mb(); /* */
	musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
	musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
	musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);

	if (musb->int_usb & (1 << 2)) {
		musb_writew(musb->mregs, 0x74, 3);
		spin_unlock_irqrestore(&musb->lock, flags);
		return 0;
	}

	if (musb->int_usb || musb->int_tx || musb->int_rx)
		retval = musb_interrupt(musb);

	spin_unlock_irqrestore(&musb->lock, flags);

	return retval;
}

static void mt8xx_phy_poweron(void)
{
#if 0
	udelay(50);

	writeb(readb(0x11110000 + 0x81d) & ~0x10, (char*) 0x11110000 + 0x81d);
	writeb(readb(0x11110000 + 0x86b) & ~0x04, (char*) 0x11110000 + 0x86b);
	writeb(readb(0x11110000 + 0x86e) & ~0x01, (char*) 0x11110000 + 0x86e);
	writeb(readb(0x11110000 + 0x86a) & ~0x04, (char*) 0x11110000 + 0x86a);
	writeb(readb(0x11110000 + 0x821) & ~0x03, (char*) 0x11110000 + 0x821);
	writeb(readb(0x11110000 + 0x868) & ~0x40, (char*) 0x11110000 + 0x868);
	writeb(readb(0x11110000 + 0x868) & ~0x80, (char*) 0x11110000 + 0x868);
	writeb(readb(0x11110000 + 0x868) & ~0x30, (char*) 0x11110000 + 0x868);
	writeb(readb(0x11110000 + 0x868) & ~0x04, (char*) 0x11110000 + 0x868);
	writeb(readb(0x11110000 + 0x869) & ~0x3c, (char*) 0x11110000 + 0x869);

	writeb(readb(0x11110000 + 0x86a) & ~0x10, (char*) 0x11110000 + 0x86a);
	writeb(readb(0x11110000 + 0x86a) & ~0x20, (char*) 0x11110000 + 0x86a);
	writeb(readb(0x11110000 + 0x86a) & ~0x08, (char*) 0x11110000 + 0x86a);
	writeb(readb(0x11110000 + 0x86a) & ~0x02, (char*) 0x11110000 + 0x86a);
	writeb(readb(0x11110000 + 0x86a) & ~0x80, (char*) 0x11110000 + 0x86a);

	writeb(readb(0x11110000 + 0x81a) & ~0x80, (char*) 0x11110000 + 0x81a);
	writeb(readb(0x11110000 + 0x81a) | 0x10, (char*) 0x11110000 + 0x81a);
	writeb(readb(0x11110000 + 0x818) & ~0x08, (char*) 0x11110000 + 0x818);
	writeb(readb(0x11110000 + 0x818) | 0x06, (char*) 0x11110000 + 0x818);

	udelay(800);

	writeb(readb(0x11110000 + 0x86c) & ~0x10, (char*) 0x11110000 + 0x86c);
	writeb(readb(0x11110000 + 0x86c) | 0x2e, (char*) 0x11110000 + 0x86c);
	writeb(readb(0x11110000 + 0x86d) | 0x3e, (char*) 0x11110000 + 0x86d);
#endif

#define USBPHY_CLR8(reg, val) writeb(readb(0x11110800 + reg) & ~val, 0x11110800 + reg)
#define USBPHY_SET8(reg, val) writeb(readb(0x11110800 + reg) | val, 0x11110800 + reg)

    /*
     * swtich to USB function.
     * (system register, force ip into usb mode).
     */
    USBPHY_CLR8(0x6b, 0x04);
    USBPHY_CLR8(0x6e, 0x01);
    USBPHY_CLR8(0x21, 0x03);

    /* RG_USB20_BC11_SW_EN = 1'b0 */
    USBPHY_SET8(0x22, 0x04);
    USBPHY_CLR8(0x1a, 0x80);

    /* RG_USB20_DP_100K_EN = 1'b0 */
    /* RG_USB20_DP_100K_EN = 1'b0 */
    USBPHY_CLR8(0x22, 0x03);

    /*OTG enable*/
    USBPHY_SET8(0x20, 0x10);
    /* release force suspendm */
    USBPHY_CLR8(0x6a, 0x04);

    udelay(800);

    /* force enter device mode */
    USBPHY_CLR8(0x6c, 0x10);
    USBPHY_SET8(0x6c, 0x2E);
    USBPHY_SET8(0x6d, 0x3E);

/*** recover *****/


    USBPHY_CLR8(0x1d, 0x10);

    /* force_uart_en = 1'b0 */
    USBPHY_CLR8(0x6b, 0x04);
    /* RG_UART_EN = 1'b0 */
    USBPHY_CLR8(0x6e, 0x01);
    /* force_uart_en = 1'b0 */
    USBPHY_CLR8(0x6a, 0x04);

    USBPHY_CLR8(0x21, 0x03);
    USBPHY_CLR8(0x68, 0xf4);

    /* RG_DATAIN[3:0] = 4'b0000 */
    USBPHY_CLR8(0x69, 0x3c);

    USBPHY_CLR8(0x6a, 0xba);

    /* RG_USB20_BC11_SW_EN = 1'b0 */
    USBPHY_CLR8(0x1a, 0x80);
    /* RG_USB20_OTG_VBUSSCMP_EN = 1'b1 */
    USBPHY_SET8(0x1a, 0x10);

    //HQA adjustment
    USBPHY_CLR8(0x18, 0x08);
    USBPHY_SET8(0x18, 0x06);
    udelay(800);
}

static int mt8xx_musb_init(struct musb *musb)
{
	int ret;
	int status;

//		musb_writew(musb->mregs, 0x74, 3);
	musb->isr = mt8xx_musb_interrupt;

	musb_writel(musb->mregs, USB_L1INTM,
							TX_INT_STATUS | RX_INT_STATUS | USBCOM_INT_STATUS |
							DMA_INT_STATUS);
	return 0;
}

static int mt8xx_musb_exit(struct musb *musb)
{
	return 0;
}

static int mt8xx_musb_enable(struct musb *musb)
{
	unsigned long   flags;

	mt8xx_phy_poweron();

	flags = musb_readl(musb->mregs, USB_L1INTM);

	musb_writel(musb->mregs, USB_L1INTM, (~IDDIG_INT_STATUS) & flags);
	mdelay(10);
	musb_writel(musb->mregs, USB_L1INTM, flags);

	return 0;
}

static const struct musb_platform_ops mt8xx_ops = {
	.init		= mt8xx_musb_init,
	.exit		= mt8xx_musb_exit,
	.enable		= mt8xx_musb_enable,
};


static void mt_usb_phy_recover(void)
{

    /* clean PUPD_BIST_EN */
    /* PUPD_BIST_EN = 1'b0 */
    /* PMIC will use it to detect charger type */
    USBPHY_CLR8(0x1d, 0x10);

    /* force_uart_en = 1'b0 */
    USBPHY_CLR8(0x6b, 0x04);
    /* RG_UART_EN = 1'b0 */
    USBPHY_CLR8(0x6e, 0x01);
    /* force_uart_en = 1'b0 */
    USBPHY_CLR8(0x6a, 0x04);

    USBPHY_CLR8(0x21, 0x03);
    USBPHY_CLR8(0x68, 0xf4);

    /* RG_DATAIN[3:0] = 4'b0000 */
    USBPHY_CLR8(0x69, 0x3c);

    USBPHY_CLR8(0x6a, 0xba);

    /* RG_USB20_BC11_SW_EN = 1'b0 */
    USBPHY_CLR8(0x1a, 0x80);
    /* RG_USB20_OTG_VBUSSCMP_EN = 1'b1 */
    USBPHY_SET8(0x1a, 0x10);

    //HQA adjustment
    USBPHY_CLR8(0x18, 0x08);
    USBPHY_SET8(0x18, 0x06);
    udelay(800);

    /* force enter device mode */
    //USBPHY_CLR8(0x6c, 0x10);
    //USBPHY_SET8(0x6c, 0x2E);
    //USBPHY_SET8(0x6d, 0x3E);
}

static int mt8xx_probe(struct udevice *udev)
{
	struct mt8xx_glue *glue = dev_get_platdata(udev);
	struct udevice *clk_dev;
	struct udevice *clk_cg_dev;
	int ret;
	int i;

	unsigned long usb_clk[] = {
		CLK_TOP_USB_PHY48M,
		CLK_TOP_USB_78M,
		CLK_TOP_USBIF,
		CLK_TOP_USB,
		CLK_TOP_USB_1P,
	};

	ret = uclass_get_device_by_driver(UCLASS_CLK,
			DM_GET_DRIVER(mtk_clk_topckgen), &clk_dev);
	if (ret)
		return ret;

	ret = uclass_get_device_by_driver(UCLASS_CLK,
			DM_GET_DRIVER(mtk_clk_topckgen_cg), &clk_cg_dev);
	if (ret)
		return ret;
#if 1
	for (i = 0; i < ARRAY_SIZE(usb_clk); i++) {
		struct clk clk = { .id = usb_clk[i], .dev = clk_dev };
		if (i != 0)
			clk.dev = clk_cg_dev;

		ret = clk_enable(&clk);
		if (ret)
			return ret;
		ret = clk_disable(&clk);
		if (ret)
			return ret;
	}

	for (i = 0; i < ARRAY_SIZE(usb_clk); i++) {
		struct clk clk = { .id = usb_clk[i], .dev = clk_dev };
		if (i != 0)
			clk.dev = clk_cg_dev;

		ret = clk_enable(&clk);
		if (ret)
			return ret;
	}

	struct clk clk1 = { .id = CLK_TOP_USB_78M_SEL, .dev = clk_dev };
	struct clk clk2 = { .id = CLK_TOP_UNIVPLL_D16, .dev = clk_dev };

	clk_set_parent(&clk1, &clk2);
#endif

	u32 l1ints, l1intm;

    u8 tmpReg8;

    /* connect */
    tmpReg8 = musb_readb(glue->base, MUSB_POWER);
    tmpReg8 &= ~MUSB_POWER_SOFTCONN;
    musb_writeb(glue->base, MUSB_POWER, tmpReg8);

	mt_usb_phy_recover();

	glue->base = (void*) 0x11100000;
	glue->otg_board_data.dev = udev;
	glue->musb_pdata.config = &mt8xx_musb_hdrc_config;
	glue->musb_pdata.platform_ops = &mt8xx_ops;
	glue->musb_pdata.board_data = &glue->otg_board_data;
	glue->musb_pdata.mode = MUSB_PERIPHERAL;

    musb_writeb(glue->base, MUSB_POWER, 0);

	l1ints = musb_readl(glue->base, USB_L1INTS);
	l1intm = musb_readl(glue->base, USB_L1INTM);
	musb_writew(glue->base, MUSB_INTRRX, 0xffff);
	musb_writew(glue->base, MUSB_INTRTX, 0xffff);
	musb_writeb(glue->base, MUSB_INTRUSB, 0xff);
	musb_writeb(glue->base, 0xb, 39);

	glue->musb = musb_register(&glue->musb_pdata,
			  (struct device *)&glue->otg_board_data,
			  glue->base);
	if (ret)
		return ret;

	return 0;
}

static int mt8xx_remove(struct udevice *udev)
{
	return 0;
}

static const struct udevice_id mtk_musb_ids[] = {
	{ .compatible = "mediatek,mtk-musb" },
	{ }
};
#if 0
U_BOOT_DRIVER(usb_dev_generic_drv) = {
	.id		= UCLASS_USB_DEV_GENERIC,
	.name		= "usb_dev_generic_drv",
};
UCLASS_DRIVER(usb_dev_generic) = {
	.id		= UCLASS_USB_DEV_GENERIC,
	.name		= "usb_dev_generic",
};
#endif
U_BOOT_DRIVER(mtk_musb) = {
	.name     = "mtk-musb",
	.id	= UCLASS_USB_GADGET_GENERIC,
	.of_match = mtk_musb_ids,
	.ops      = &mt8xx_ops,
	.probe    = mt8xx_probe,
	.remove   = mt8xx_remove,
	.platdata_auto_alloc_size = sizeof(struct mt8xx_glue),
};