# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2019, Pascal Linder <pascal.linder@edu.hefr.ch>

config VENDOR_KM
	bool
	help
	  Selected by any KM board to have additional configurations.

if VENDOR_KM

menu "KM Board Setup"

config KM_PNVRAM
	hex "Pseudo RAM"
	default 0x80000
	help
	  Start address of the pseudo non-volatile RAM for application.

config KM_PHRAM
	hex "Physical RAM"
	default 0x17F000 if ARM
	default 0x100000 if PPC
	help
	  Start address of the physical RAM, which is the mounted /var folder.

config KM_RESERVED_PRAM
	hex "Reserved RAM"
	default 0x801000 if KIRKWOOD
	default 0x0 if MPC83xx
	default 0x1000 if MPC85xx
	help
	  Reserved physical RAM area at the end of memory for special purposes.

config KM_CRAMFS_ADDR
	hex "CRAMFS Address"
	default 0x2400000 if KIRKWOOD
	default 0xC00000 if MPC83xx
	default 0x2000000 if MPC85xx
	help
	  Start address of the CRAMFS containing the Linux kernel.

config KM_KERNEL_ADDR
	hex "Kernel Load Address"
	default 0x2000000 if KIRKWOOD
	default 0x400000 if MPC83xx
	default 0x1000000 if MPC85xx
	help
	  Address where to load Linux kernel in RAM.

config KM_FDT_ADDR
	hex "FDT Load Address"
	default 0x23E0000 if KIRKWOOD
	default 0xB80000 if MPC83xx
	default 0x1F80000 if MPC85xx
	help
	  Address where to load flattened device tree in RAM.

config KM_CONSOLE_TTY
	string "KM Console"
	default "ttyS0"
	help
	  TTY console to use on board.

config KM_COMMON_ETH_INIT
	bool "Common Ethernet Initialization"
	default y if KIRKWOOD || MPC83xx
	default n if MPC85xx
	help
	  Use the Ethernet initialization implemented in common code, which
	  detects if a Piggy board is present.

config PIGGY_MAC_ADRESS_OFFSET
	int "Piggy Address Offset"
	default 0
	help
	  MAC address offset for the Piggy board.

config KM_MVEXTSW_ADDR
	hex "Marvell Switch Address"
	depends on MV88E6352_SWITCH
	default 0x10
	help
	  Address of external Marvell switch.

config KM_IVM_BUS
	int "IVM I2C Bus"
	default 1 if KIRKWOOD || MPC85xx
	default 2 if MPC83xx
	help
	  Identifier number of I2C bus, where the inventory EEPROM is connected to.

config SYS_IVM_EEPROM_ADR
	hex "IVM I2C Address"
	default 0x50
	help
	  I2C address of the EEPROM containing the inventory.

config SYS_IVM_EEPROM_MAX_LEN
	hex "IVM Length"
	default 0x400
	help
	  Maximum length of inventory in EEPROM.

config SYS_IVM_EEPROM_PAGE_LEN
	hex "IVM Page Size"
	default 0x100
	help
	  Page size of inventory in EEPROM.

source "board/keymile/km83xx/Kconfig"
source "board/keymile/kmp204x/Kconfig"
source "board/keymile/km_arm/Kconfig"

endmenu

endif