diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 54d03ae..24c606a 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -501,6 +501,10 @@
 config SYS_FSL_IFC_CLK_DIV
 	int "IFC clock divider"
 	default 1 if ARCH_LS1043A
+	default 4 if ARCH_LS1012A
+	default 4 if ARCH_LS1028A
+	default 8 if ARCH_LX2160A
+	default 8 if ARCH_LS1088A
 	default 2
 	help
 	  This is the divider that is used to derive IFC clock from Platform
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 26f4fda..a5d0b53 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -1154,7 +1154,8 @@
 #ifdef CONFIG_FSL_LSCH3
 	u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
 #endif
-#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \
+	defined(CONFIG_ARCH_LS1028A)
 	u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
 	u32 svr_dev_id;
 #endif
@@ -1173,7 +1174,8 @@
 	out_le32(cltbenr, 0xf);
 #endif
 
-#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \
+	defined(CONFIG_ARCH_LS1028A)
 	/*
 	 * In certain Layerscape SoCs, the clock for each core's
 	 * has an enable bit in the PMU Physical Core Time Base Enable
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index fabe0f0..19917b2 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -435,7 +435,7 @@
 	do_fixup_by_path_u32(blob, "/sysclk", "clock-frequency",
 			     CONFIG_SYS_CLK_FREQ, 1);
 
-#ifdef CONFIG_PCI_LAYERSCAPE
+#if defined(CONFIG_PCIE_LAYERSCAPE) || defined(CONFIG_PCIE_LAYERSCAPE_GEN4)
 	ft_pci_setup(blob, bd);
 #endif
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
index 9ece4b9..df4df9a 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
@@ -22,10 +22,12 @@
 void get_sys_info(struct sys_info *sys_info)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-#if (defined(CONFIG_FSL_ESDHC) &&\
-	defined(CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK)) ||\
-	defined(CONFIG_SYS_DPAA_FMAN)
-
+/* rcw_tmp is needed to get FMAN clock, or to get cluster group A
+ * mux 2 clock for LS1043A/LS1046A.
+ */
+#if defined(CONFIG_SYS_DPAA_FMAN) || \
+	    defined(CONFIG_TARGET_LS1046ARDB) || \
+	    defined(CONFIG_TARGET_LS1043ARDB)
 	u32 rcw_tmp;
 #endif
 	struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_CLK_ADDR);
@@ -122,32 +124,32 @@
 	}
 #endif
 
+#ifdef CONFIG_FSL_ESDHC
 #define HWA_CGA_M2_CLK_SEL	0x00000007
 #define HWA_CGA_M2_CLK_SHIFT	0
-#ifdef CONFIG_FSL_ESDHC
-#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
+#if defined(CONFIG_TARGET_LS1046ARDB) || defined(CONFIG_TARGET_LS1043ARDB)
 	rcw_tmp = in_be32(&gur->rcwsr[15]);
 	switch ((rcw_tmp & HWA_CGA_M2_CLK_SEL) >> HWA_CGA_M2_CLK_SHIFT) {
 	case 1:
-		sys_info->freq_sdhc = freq_c_pll[1];
+		sys_info->freq_cga_m2 = freq_c_pll[1];
 		break;
+#if defined(CONFIG_TARGET_LS1046ARDB)
 	case 2:
-		sys_info->freq_sdhc = freq_c_pll[1] / 2;
+		sys_info->freq_cga_m2 = freq_c_pll[1] / 2;
 		break;
+#endif
 	case 3:
-		sys_info->freq_sdhc = freq_c_pll[1] / 3;
+		sys_info->freq_cga_m2 = freq_c_pll[1] / 3;
 		break;
+#if defined(CONFIG_TARGET_LS1046ARDB)
 	case 6:
-		sys_info->freq_sdhc = freq_c_pll[0] / 2;
+		sys_info->freq_cga_m2 = freq_c_pll[0] / 2;
 		break;
+#endif
 	default:
-		printf("Error: Unknown ESDHC clock select!\n");
+		printf("Error: Unknown peripheral clock select!\n");
 		break;
 	}
-#else
-	sys_info->freq_sdhc = (sys_info->freq_systembus /
-				CONFIG_SYS_FSL_PCLK_DIV) /
-				CONFIG_SYS_FSL_SDHC_CLK_DIV;
 #endif
 #endif
 
@@ -183,9 +185,22 @@
 	gd->mem_clk = sys_info.freq_ddrbus;
 
 #ifdef CONFIG_FSL_ESDHC
-	gd->arch.sdhc_clk = sys_info.freq_sdhc;
+#if defined(CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK)
+#if defined(CONFIG_TARGET_LS1046ARDB)
+	gd->arch.sdhc_clk = sys_info.freq_cga_m2 / 2;
 #endif
-
+#if defined(CONFIG_TARGET_LS1043ARDB)
+	gd->arch.sdhc_clk = sys_info.freq_cga_m2;
+#endif
+#if defined(CONFIG_TARGET_LS1012ARDB)
+	gd->arch.sdhc_clk = sys_info.freq_systembus;
+#endif
+#else
+	gd->arch.sdhc_clk = (sys_info.freq_systembus /
+			CONFIG_SYS_FSL_PCLK_DIV) /
+			CONFIG_SYS_FSL_SDHC_CLK_DIV;
+#endif
+#endif
 	if (gd->cpu_clk != 0)
 		return 0;
 	else
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
index a5540f2..b3e6732 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
@@ -64,6 +64,9 @@
 	};
 
 	uint i, cluster;
+#if defined(CONFIG_TARGET_LS1028ARDB) || defined(CONFIG_TARGET_LS1088ARDB)
+	uint rcw_tmp;
+#endif
 	uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
@@ -127,8 +130,39 @@
 	sys_info->freq_localbus = sys_info->freq_systembus /
 						CONFIG_SYS_FSL_IFC_CLK_DIV;
 #endif
-}
 
+#if defined(CONFIG_TARGET_LS1028ARDB) || defined(CONFIG_TARGET_LS1088ARDB)
+#define HWA_CGA_M2_CLK_SEL      0x00380000
+#define HWA_CGA_M2_CLK_SHIFT    19
+	rcw_tmp = in_le32(&gur->rcwsr[5]);
+	switch ((rcw_tmp & HWA_CGA_M2_CLK_SEL) >> HWA_CGA_M2_CLK_SHIFT) {
+	case 1:
+		sys_info->freq_cga_m2 = freq_c_pll[1];
+		break;
+	case 2:
+		sys_info->freq_cga_m2 = freq_c_pll[1] / 2;
+		break;
+	case 3:
+		sys_info->freq_cga_m2 = freq_c_pll[1] / 3;
+		break;
+	case 4:
+		sys_info->freq_cga_m2 = freq_c_pll[1] / 4;
+		break;
+	case 6:
+		sys_info->freq_cga_m2 = freq_c_pll[0] / 2;
+		break;
+	case 7:
+		sys_info->freq_cga_m2 = freq_c_pll[0] / 3;
+		break;
+	default:
+		printf("Error: Unknown peripheral clock select!\n");
+		break;
+	}
+#endif
+#if defined(CONFIG_TARGET_LX2160ARDB) || defined(CONFIG_TARGET_LS2080ARDB)
+	sys_info->freq_cga_m2 = sys_info->freq_systembus;
+#endif
+}
 
 int get_clocks(void)
 {
@@ -141,7 +175,16 @@
 	gd->arch.mem2_clk = sys_info.freq_ddrbus2;
 #endif
 #if defined(CONFIG_FSL_ESDHC)
+#if defined(CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK)
+#if defined(CONFIG_TARGET_LS1028ARDB) || defined(CONFIG_TARGET_LX2160ARDB)
+	gd->arch.sdhc_clk = sys_info.freq_cga_m2 / 2;
+#endif
+#if defined(CONFIG_TARGET_LS2080ARDB) || defined(CONFIG_TARGET_LS1088ARDB)
+	gd->arch.sdhc_clk = sys_info.freq_cga_m2;
+#endif
+#else
 	gd->arch.sdhc_clk = gd->bus_clk / CONFIG_SYS_FSL_SDHC_CLK_DIV;
+#endif
 #endif /* defined(CONFIG_FSL_ESDHC) */
 
 	if (gd->cpu_clk != 0)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c
index 5835a3a..313f3f1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c
@@ -24,7 +24,7 @@
 	{0xDDDD, {PCIE1, PCIE1, PCIE1, PCIE1} },
 	{0xE031, {SXGMII1, QXGMII2, NONE, SATA1} },
 	{0xB991, {SXGMII1, SGMII1, SGMII2, PCIE1} },
-	{0xBB31, {SXGMII1, QXGMII2, PCIE1, PCIE1} },
+	{0xBB31, {SXGMII1, QXGMII2, PCIE2, PCIE1} },
 	{0xCC31, {SXGMII1, QXGMII2, PCIE2, PCIE2} },
 	{0xBB51, {SXGMII1, QSGMII_B, PCIE2, PCIE1} },
 	{0xBB38, {SGMII_T1, QXGMII2, PCIE2, PCIE1} },
diff --git a/arch/arm/dts/fsl-ls1012a-rdb.dtsi b/arch/arm/dts/fsl-ls1012a-rdb.dtsi
index f053e78..55155fd 100644
--- a/arch/arm/dts/fsl-ls1012a-rdb.dtsi
+++ b/arch/arm/dts/fsl-ls1012a-rdb.dtsi
@@ -14,6 +14,10 @@
 	};
 };
 
+&esdhc1 {
+	mmc-hs200-1_8v;
+};
+
 &qspi {
 	bus-num = <0>;
 	status = "okay";
diff --git a/arch/arm/dts/fsl-ls1028a-qds.dts b/arch/arm/dts/fsl-ls1028a-qds.dts
index 3fb35f1..5d143ba 100644
--- a/arch/arm/dts/fsl-ls1028a-qds.dts
+++ b/arch/arm/dts/fsl-ls1028a-qds.dts
@@ -33,12 +33,65 @@
 
 &esdhc1 {
 	status = "okay";
+
 };
 
 &i2c0 {
 	status = "okay";
 	u-boot,dm-pre-reloc;
 
+	fpga@66 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-mfd";
+		reg = <0x66>;
+
+		mux-mdio@54 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mdio-mux-i2creg";
+			reg = <0x54>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xf0>;
+			mdio-parent-bus = <&mdio0>;
+
+			/* on-board MDIO with a single RGMII PHY */
+			mdio@00 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x00>;
+
+				qds_phy0: phy@5 {
+					reg = <5>;
+				};
+			};
+			/* slot 1 */
+			slot1: mdio@40 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x40>;
+			};
+			/* slot 2 */
+			slot2: mdio@50 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x50>;
+			};
+			/* slot 3 */
+			slot3: mdio@60 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x60>;
+			};
+			/* slot 4 */
+			slot4: mdio@70 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+			};
+		};
+	};
+
 	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
@@ -108,7 +161,4 @@
 
 &mdio0 {
 	status = "okay";
-	qds_phy0: phy@5 {
-		reg = <5>;
-	};
 };
diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
index d18cf6d..3d5e8ad 100644
--- a/arch/arm/dts/fsl-ls1028a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -33,6 +33,7 @@
 
 &esdhc1 {
 	status = "okay";
+	mmc-hs200-1_8v;
 };
 
 &i2c0 {
diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
index 7b6608b..46a9239 100644
--- a/arch/arm/dts/fsl-lx2160a-rdb.dts
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -25,6 +25,7 @@
 
 &esdhc1 {
 	status = "okay";
+	mmc-hs200-1_8v;
 };
 
 &i2c0 {
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index b4b7c34..3a59abb 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -180,7 +180,7 @@
 	unsigned long freq_systembus;
 	unsigned long freq_ddrbus;
 	unsigned long freq_localbus;
-	unsigned long freq_sdhc;
+	unsigned long freq_cga_m2;
 #ifdef CONFIG_SYS_DPAA_FMAN
 	unsigned long freq_fman[CONFIG_SYS_NUM_FMAN];
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 8a5446d..4f05047 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -278,6 +278,7 @@
 	/* frequency of platform PLL */
 	unsigned long freq_systembus;
 	unsigned long freq_ddrbus;
+	unsigned long freq_cga_m2;
 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	unsigned long freq_ddrbus2;
 #endif
diff --git a/board/freescale/lx2160a/eth_lx2160aqds.c b/board/freescale/lx2160a/eth_lx2160aqds.c
index 92c06e5..55e8a42 100644
--- a/board/freescale/lx2160a/eth_lx2160aqds.c
+++ b/board/freescale/lx2160a/eth_lx2160aqds.c
@@ -105,6 +105,8 @@
 	       EMI1, IO_SLOT_1},
 	     {WRIOP1_DPMAC2, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
 	      EMI1, IO_SLOT_2} } },
+	{14, {{WRIOP1_DPMAC1, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
+	       EMI1, IO_SLOT_1} } },
 	{15, {{WRIOP1_DPMAC1, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
 	       EMI1, IO_SLOT_1},
 	     {WRIOP1_DPMAC2, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
@@ -686,7 +688,7 @@
 			struct phy_device *phy_dev, int phandle)
 {
 	char phy_node_name[] = "ethernet-phy@00";
-	char phy_id_compatible_str[] = "ethernet-phy-id0000.0000";
+	char phy_id_compatible_str[] = "ethernet-phy-id0000.0000,";
 	int ret;
 
 	sprintf(phy_node_name, "ethernet-phy@%x", phyaddr);
@@ -700,7 +702,7 @@
 		return *subnodeoffset;
 	}
 
-	sprintf(phy_id_compatible_str, "ethernet-phy-id%04x.%04x",
+	sprintf(phy_id_compatible_str, "ethernet-phy-id%04x.%04x,",
 		phy_dev->phy_id >> 16, phy_dev->phy_id & 0xFFFF);
 	debug("phy_id_compatible_str %s\n", phy_id_compatible_str);
 
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index 7f19a1a..b509c03 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -20,6 +20,8 @@
 #include <efi_loader.h>
 #include <asm/arch/mmu.h>
 #include <hwconfig.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/config.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/soc.h>
 #include "../common/qixis.h"
@@ -116,6 +118,72 @@
 	return 0;
 }
 
+#ifdef CONFIG_OF_BOARD_FIXUP
+int board_fix_fdt(void *fdt)
+{
+	char *reg_names, *reg_name;
+	int names_len, old_name_len, new_name_len, remaining_names_len;
+	struct str_map {
+		char *old_str;
+		char *new_str;
+	} reg_names_map[] = {
+		{ "ccsr", "dip" },
+		{ "pf_ctrl", "ctrl" }
+	};
+	int off = -1, i;
+
+	if (IS_SVR_REV(get_svr(), 1, 0))
+		return 0;
+
+	off = fdt_node_offset_by_compatible(fdt, -1, "fsl,lx2160a-pcie");
+	while (off != -FDT_ERR_NOTFOUND) {
+		fdt_setprop(fdt, off, "compatible", "fsl,ls-pcie",
+			    strlen("fsl,ls-pcie") + 1);
+
+		reg_names = (char *)fdt_getprop(fdt, off, "reg-names",
+						&names_len);
+		if (!reg_names)
+			continue;
+
+		reg_name = reg_names;
+		remaining_names_len = names_len - (reg_name - reg_names);
+		for (i = 0; (i < ARRAY_SIZE(reg_names_map)) && names_len; i++) {
+			old_name_len = strlen(reg_names_map[i].old_str);
+			new_name_len = strlen(reg_names_map[i].new_str);
+			if (memcmp(reg_name, reg_names_map[i].old_str,
+				   old_name_len) == 0) {
+				/* first only leave required bytes for new_str
+				 * and copy rest of the string after it
+				 */
+				memcpy(reg_name + new_name_len,
+				       reg_name + old_name_len,
+				       remaining_names_len - old_name_len);
+				/* Now copy new_str */
+				memcpy(reg_name, reg_names_map[i].new_str,
+				       new_name_len);
+				names_len -= old_name_len;
+				names_len += new_name_len;
+			}
+
+			reg_name = memchr(reg_name, '\0', remaining_names_len);
+			if (!reg_name)
+				break;
+
+			reg_name += 1;
+
+			remaining_names_len = names_len -
+					      (reg_name - reg_names);
+		}
+
+		fdt_setprop(fdt, off, "reg-names", reg_names, names_len);
+		off = fdt_node_offset_by_compatible(fdt, off,
+						    "fsl,lx2160a-pcie");
+	}
+
+	return 0;
+}
+#endif
+
 #if defined(CONFIG_TARGET_LX2160AQDS)
 void esdhc_dspi_status_fixup(void *blob)
 {
@@ -283,7 +351,7 @@
 
 	puts("SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 161.13MHz\n");
 	puts("SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
-	puts("SERDES3 Reference: Clock1 = 100MHz Clock2 = 100Hz\n");
+	puts("SERDES3 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
 #endif
 	return 0;
 }
diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig
index 275fad8..fd3b2c1 100644
--- a/configs/ls1012ardb_tfa_defconfig
+++ b/configs/ls1012ardb_tfa_defconfig
@@ -55,4 +55,6 @@
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
+CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK=y
+CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_USB_XHCI_DWC3=y
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index 4d0c12f..185345b 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -74,4 +74,6 @@
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
+CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK=y
+CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig
index 4e85543..e38c2a1 100644
--- a/configs/lx2160aqds_tfa_defconfig
+++ b/configs/lx2160aqds_tfa_defconfig
@@ -9,6 +9,7 @@
 CONFIG_AHCI=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_BOARD_FIXUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index 7bcb792..6d14b6f 100644
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -10,6 +10,7 @@
 CONFIG_AHCI=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_BOARD_FIXUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
@@ -62,4 +63,6 @@
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK=y
+CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 8fb2bfa..7361bca 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -167,7 +167,6 @@
 	  The HS200 mode is support by some eMMC. The bus frequency is up to
 	  200MHz. This mode requires tuning the IO.
 
-
 config SPL_MMC_HS200_SUPPORT
 	bool "enable HS200 support in SPL"
 	help
@@ -695,10 +694,19 @@
 
 config FSL_ESDHC
 	bool "Freescale/NXP eSDHC controller support"
+	select FSL_ESDHC_USE_PERIPHERAL_CLK if MMC_HS200_SUPPORT || MMC_UHS_SUPPORT
 	help
 	  This selects support for the eSDHC (Enhanced Secure Digital Host
 	  Controller) found on numerous Freescale/NXP SoCs.
 
+config FSL_ESDHC_USE_PERIPHERAL_CLK
+	bool "enable ESDHC peripheral clock support"
+	depends on FSL_ESDHC
+	help
+	  eSDHC supports two reference clocks (platform clock and peripheral clock).
+	  Peripheral clock which could provide higher clock frequency is required to
+	  be used for tuning of SD UHS mode and eMMC HS200/HS400 modes.
+
 config FSL_ESDHC_IMX
 	bool "Freescale/NXP i.MX eSDHC controller support"
 	help
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 0731847..28d2312 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -395,10 +395,6 @@
 	esdhc_write32(&regs->cmdarg, cmd->cmdarg);
 	esdhc_write32(&regs->xfertyp, xfertyp);
 
-	if ((cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK) ||
-	    (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200))
-		flags = IRQSTAT_BRR;
-
 	/* Wait for the command to complete */
 	start = get_timer(0);
 	while (!(esdhc_read32(&regs->irqstat) & flags)) {
@@ -458,12 +454,6 @@
 #ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
 		esdhc_pio_read_write(priv, data);
 #else
-		flags = DATA_COMPLETE;
-		if ((cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK) ||
-		    (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)) {
-			flags = IRQSTAT_BRR;
-		}
-
 		do {
 			irqstat = esdhc_read32(&regs->irqstat);
 
@@ -476,7 +466,7 @@
 				err = -ECOMM;
 				goto out;
 			}
-		} while ((irqstat & flags) != flags);
+		} while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
 
 		/*
 		 * Need invalidate the dcache here again to avoid any
@@ -517,7 +507,9 @@
 	int div = 1;
 	int pre_div = 2;
 	int ddr_pre_div = mmc->ddr_mode ? 2 : 1;
-	int sdhc_clk = priv->sdhc_clk;
+	unsigned int sdhc_clk = priv->sdhc_clk;
+	u32 time_out;
+	u32 value;
 	uint clk;
 
 	if (clock < mmc->cfg->f_min)
@@ -538,11 +530,18 @@
 
 	esdhc_clrsetbits32(&regs->sysctl, SYSCTL_CLOCK_MASK, clk);
 
-	udelay(10000);
+	time_out = 20;
+	value = PRSSTAT_SDSTB;
+	while (!(esdhc_read32(&regs->prsstat) & value)) {
+		if (time_out == 0) {
+			printf("fsl_esdhc: Internal clock never stabilised.\n");
+			break;
+		}
+		time_out--;
+		mdelay(1);
+	}
 
 	esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_CKEN);
-
-	priv->clock = clock;
 }
 
 #ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
@@ -1024,6 +1023,8 @@
 		return ret;
 	}
 
+	mmc_of_parse(dev, &plat->cfg);
+
 	mmc = &plat->mmc;
 	mmc->cfg = &plat->cfg;
 	mmc->dev = dev;
@@ -1081,6 +1082,9 @@
 	.get_cd		= fsl_esdhc_get_cd,
 	.send_cmd	= fsl_esdhc_send_cmd,
 	.set_ios	= fsl_esdhc_set_ios,
+#ifdef MMC_SUPPORTS_TUNING
+	.execute_tuning = fsl_esdhc_execute_tuning,
+#endif
 };
 #endif
 
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 9661282..f1e781e 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -87,9 +87,16 @@
 	return 0;
 }
 
+static int sp805_wdt_expire_now(struct udevice *dev, ulong flags)
+{
+	sp805_wdt_start(dev, 0, flags);
+
+	return 0;
+}
+
 static int sp805_wdt_probe(struct udevice *dev)
 {
-	debug("%s: Probing wdt%u\n", __func__, dev->seq);
+	debug("%s: Probing wdt%u (sp805-wdt)\n", __func__, dev->seq);
 
 	return 0;
 }
@@ -109,6 +116,7 @@
 	.start = sp805_wdt_start,
 	.reset = sp805_wdt_reset,
 	.stop = sp805_wdt_stop,
+	.expire_now = sp805_wdt_expire_now,
 };
 
 static const struct udevice_id sp805_wdt_ids[] = {
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 711b434..110d497 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2018 NXP
+ * Copyright 2018-2019 NXP
  */
 
 #ifndef __LX2_COMMON_H
@@ -199,14 +199,14 @@
 	"fsl_mc start mc 0x20a00000 0x20e00000\0"
 
 #define SD_MC_INIT_CMD				\
-	"mmc read 0x80000000 0x5000 0x800;"	\
-	"mmc read 0x80100000 0x7000 0x800;"	\
+	"mmc read 0x80a00000 0x5000 0x1200;"	\
+	"mmc read 0x80e00000 0x7000 0x800;"	\
 	"env exists secureboot && "		\
 	"mmc read 0x80700000 0x3800 0x10 && "	\
 	"mmc read 0x80740000 0x3A00 0x10 && "	\
 	"esbc_validate 0x80700000 && "		\
 	"esbc_validate 0x80740000 ;"		\
-	"fsl_mc start mc 0x80000000 0x80100000\0"
+	"fsl_mc start mc 0x80a00000 0x80e00000\0"
 
 #define EXTRA_ENV_SETTINGS			\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
@@ -265,11 +265,11 @@
 
 #define SD_BOOTCOMMAND						\
 		"env exists mcinitcmd && mmcinfo; "		\
-		"mmc read 0x80001000 0x6800 0x800; "		\
+		"mmc read 0x80d00000 0x6800 0x800; "		\
 		"env exists mcinitcmd && env exists secureboot "	\
 		" && mmc read 0x80780000 0x3C00 0x10 "		\
 		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
-		"&& fsl_mc lazyapply dpl 0x80001000;"		\
+		"&& fsl_mc lazyapply dpl 0x80d00000;"		\
 		"run distro_bootcmd;run sd_bootcmd;"		\
 		"env exists secureboot && esbc_halt;"
 
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 7d7e946..33dcbee 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -205,6 +205,10 @@
 int fsl_esdhc_mmc_init(bd_t *bis);
 int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg);
 void fdt_fixup_esdhc(void *blob, bd_t *bd);
+#ifdef MMC_SUPPORTS_TUNING
+static inline int fsl_esdhc_execute_tuning(struct udevice *dev,
+					   uint32_t opcode) {return 0; }
+#endif
 #else
 static inline int fsl_esdhc_mmc_init(bd_t *bis) { return -ENOSYS; }
 static inline void fdt_fixup_esdhc(void *blob, bd_t *bd) {}