// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * T2080/T2081 Silicon/SoC Device Tree Source (pre include)
 *
 * Copyright 2013 Freescale Semiconductor Inc.
 * Copyright 2018 NXP
 */

/dts-v1/;

/include/ "e6500_power_isa.dtsi"

/ {
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: PowerPC,e6500@0 {
			device_type = "cpu";
			reg = <0 1>;
			fsl,portid-mapping = <0x80000000>;
		};
		cpu1: PowerPC,e6500@2 {
			device_type = "cpu";
			reg = <2 3>;
			fsl,portid-mapping = <0x80000000>;
		};
		cpu2: PowerPC,e6500@4 {
			device_type = "cpu";
			reg = <4 5>;
			fsl,portid-mapping = <0x80000000>;
		};
		cpu3: PowerPC,e6500@6 {
			device_type = "cpu";
			reg = <6 7>;
			fsl,portid-mapping = <0x80000000>;
		};
	};

	soc: soc@ffe000000 {
		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
		reg = <0xf 0xfe000000 0 0x00001000>;
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "simple-bus";

		mpic: pic@40000 {
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <4>;
			reg = <0x40000 0x40000>;
			compatible = "fsl,mpic";
			device_type = "open-pic";
			clock-frequency = <0x0>;
		};

		esdhc: esdhc@114000 {
			compatible = "fsl,esdhc";
			reg = <0x114000 0x1000>;
			interrupts = <48 2 0 0>;
			clock-frequency = <0>;
			sdhci,auto-cmd12;
			bus-width = <4>;
			voltage-ranges = <1800 1800 3300 3300>;
		};

		usb0: usb@210000 {
			compatible = "fsl-usb2-mph";
			reg = <0x210000 0x1000>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <44 0x2 0 0>;
			phy_type = "utmi";
		};

		usb1: usb@211000 {
			compatible = "fsl-usb2-dr";
			reg = <0x211000 0x1000>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <45 0x2 0 0>;
			dr_mode = "host";
			phy_type = "utmi";
		};

		sata0: sata@220000 {
			compatible = "fsl,pq-sata-v2";
			reg = <0x220000 0x1000>;
			interrupts = <68 0x2 0 0>;
			sata-number = <0x0>;
			sata-fpdma = <0x0>;
		};

		sata1: sata@221000 {
			compatible = "fsl,pq-sata-v2";
			reg = <0x221000 0x1000>;
			interrupts = <69 0x2 0 0>;
			sata-number = <0x0>;
			sata-fpdma = <0x0>;
		};
	};

	pcie@ffe240000 {
		compatible = "fsl,pcie-t2080", "fsl,pcie-fsl-qoriq";
		reg = <0xf 0xfe240000 0x0 0x4000>;   /* registers */
		law_trgt_if = <0>;
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		bus-range = <0x0 0xff>;
		ranges = <0x01000000 0x0 0x00000000 0xf 0xf8000000 0x0 0x00010000   /* downstream I/O */
			  0x02000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000>; /* non-prefetchable memory */
	};

	pcie@ffe250000 {
		compatible = "fsl,pcie-t2080", "fsl,pcie-fsl-qoriq";
		reg = <0xf 0xfe250000 0x0 0x1000>;   /* registers */
		law_trgt_if = <1>;
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		bus-range = <0x0 0xff>;
		ranges = <0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000   /* downstream I/O */
			  0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000>; /* non-prefetchable memory */
	};

	pcie@ffe260000 {
		compatible = "fsl,pcie-t2080", "fsl,pcie-fsl-qoriq";
		reg = <0xf 0xfe260000 0x0 0x1000>;   /* registers */
		law_trgt_if = <2>;
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		bus-range = <0x0 0xff>;
		ranges = <0x01000000 0x0 0x00000000 0xf 0xf8020000 0x0 0x00010000   /* downstream I/O */
			  0x02000000 0x0 0xe0000000 0xc 0x30000000 0x0 0x10000000>; /* non-prefetchable memory */
	};

	pcie@ffe270000 {
		compatible = "fsl,pcie-t2080", "fsl,pcie-fsl-qoriq";
		reg = <0xf 0xfe270000 0x0 0x1000>;   /* registers */
		law_trgt_if = <3>;
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		bus-range = <0x0 0xff>;
		ranges = <0x01000000 0x0 0x00000000 0xf 0xf8030000 0x0 0x00010000   /* downstream I/O */
			  0x02000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x10000000>; /* non-prefetchable memory */
	};
};