/*
 * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include <assert.h>

#include <common/bl_common.h>
#include <common/debug.h>
#include <drivers/generic_delay_timer.h>
#include <lib/mmio.h>
#include <plat/common/common_def.h>
#include <plat/common/platform.h>
#include <drivers/ti/uart/uart_16550.h>

#include <mcucfg.h>
#include <mtcmos.h>
#include <mtk_plat_common.h>
#include <plat_arm.h>
#include <plat_private.h>
#include <spm.h>
#include <mtspmc.h>

void plat_mt_gic_driver_init(void);
void plat_mt_gic_init(void);

static entry_point_info_t bl32_ep_info;
static entry_point_info_t bl33_ep_info;

static void platform_setup_cpu(void)
{

	/* set LITTLE cores arm64 boot mode */
	mmio_setbits_32((uintptr_t)&mt8173_mcucfg->mp0_rv_addr[0].rv_addr_hw,
		MP0_CPUCFG_64BIT);

	spmc_init();
}

static void platform_setup_sram(void)
{
	/* protect BL31 memory from non-secure read/write access */
	mmio_write_32(SRAMROM_SEC_ADDR, (uint32_t)(BL31_END + 0x3ff) & 0x3fc00);
	mmio_write_32(SRAMROM_SEC_CTRL, 0x10000ff9);
}

/*******************************************************************************
 * Return a pointer to the 'entry_point_info' structure of the next image for
 * the security state specified. BL33 corresponds to the non-secure image type
 * while BL32 corresponds to the secure image type. A NULL pointer is returned
 * if the image does not exist.
 ******************************************************************************/
entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
{
	entry_point_info_t *next_image_info;

	next_image_info = (type == NON_SECURE) ? &bl33_ep_info : &bl32_ep_info;

	/* None of the images on this platform can have 0x0 as the entrypoint */
	if (next_image_info->pc)
		return next_image_info;
	else
		return NULL;
}

uint32_t plat_get_spsr_for_bl32_entry(void)
{
	/*
	 * The Secure Payload Dispatcher service is responsible for
	 * setting the SPSR prior to entry into the BL3-2 image.
	 */
	return 0;
}

#define LINUX_KERNEL_32 0
#define HRID_SIZE 2
#define DEVINFO_SIZE 4

typedef struct {
    unsigned int atf_magic;
    unsigned int tee_support;
    unsigned int tee_entry;
    unsigned int tee_boot_arg_addr;
    unsigned int hwuid[4];     // HW Unique id for t-base used
    unsigned int HRID[HRID_SIZE];      // HW random id for t-base used
    unsigned int atf_log_port;
    unsigned int atf_log_baudrate;
    unsigned int atf_log_buf_start;
    unsigned int atf_log_buf_size;
    unsigned int atf_irq_num;
    unsigned int devinfo[DEVINFO_SIZE];
    unsigned int atf_aee_debug_buf_start;
    unsigned int atf_aee_debug_buf_size;
} atf_arg_t, *atf_arg_t_ptr;

/*******************************************************************************
 * Perform any BL3-1 early platform setup. Here is an opportunity to copy
 * parameters passed by the calling EL (S-EL1 in BL2 & EL3 in BL1) before they
 * are lost (potentially). This needs to be done before the MMU is initialized
 * so that the memory layout can be used while creating page tables.
 * BL2 has flushed this information to memory, so we are guaranteed to pick up
 * good data.
 ******************************************************************************/
void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
				u_register_t arg2, u_register_t arg3)
{
	static console_16550_t console;

	console_16550_register(MT8516_UART0_BASE, MT8516_UART_CLOCK, MT8516_BAUDRATE, &console);

	/* Populate entry point information for BL3-2 and BL3-3 */
	SET_PARAM_HEAD(&bl32_ep_info,
				PARAM_EP,
				VERSION_1,
				0);
	SET_SECURITY_STATE(bl32_ep_info.h.attr, SECURE);
	bl32_ep_info.pc = BL32_BASE;
	bl32_ep_info.spsr = plat_get_spsr_for_bl32_entry();

	SET_PARAM_HEAD(&bl33_ep_info,
				PARAM_EP,
				VERSION_1,
				0);
	/*
	 * Tell BL3-1 where the non-trusted software image
	 * is located and the entry state information
	 */
	bl33_ep_info.pc = BL33_BASE;
	bl33_ep_info.spsr = plat_get_spsr_for_bl33_entry();
	SET_SECURITY_STATE(bl33_ep_info.h.attr, NON_SECURE);
}

/*******************************************************************************
 * Perform any BL3-1 platform setup code
 ******************************************************************************/
void bl31_platform_setup(void)
{
	platform_setup_cpu();
	platform_setup_sram();

	generic_delay_timer_init();

	/* Initialize the gic cpu and distributor interfaces */
	plat_mt_gic_driver_init();
	plat_mt_gic_init();
//	plat_arm_gic_driver_init();
//	plat_arm_gic_init();

	/* Initialize spm at boot time */
//	spm_boot_init();
}

/*******************************************************************************
 * Perform the very early platform specific architectural setup here. At the
 * moment this is only intializes the mmu in a quick and dirty way.
 ******************************************************************************/
void bl31_plat_arch_setup(void)
{
	plat_cci_init();
	plat_cci_enable();

	plat_configure_mmu_el3(BL_CODE_BASE,
			       BL_COHERENT_RAM_END - BL_CODE_BASE,
			       BL_CODE_BASE,
			       BL_CODE_END,
			       BL_COHERENT_RAM_BASE,
			       BL_COHERENT_RAM_END);
}