blob: 96136ec126f0f822df1dc684d6c3dc17b0edf74e [file] [log] [blame]
/*
* Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <errno.h>
#include <string.h>
#include <platform_def.h> /* also includes hikey_def.h and hikey_layout.h*/
#include <arch_helpers.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <common/desc_image_load.h>
#include <drivers/arm/pl011.h>
#include <drivers/delay_timer.h>
#include <drivers/mmc.h>
#include <drivers/synopsys/dw_mmc.h>
#include <lib/mmio.h>
#ifdef SPD_opteed
#include <lib/optee_utils.h>
#endif
#include <plat/common/platform.h>
#include <hi6220.h>
#include <hisi_mcu.h>
#include <hisi_sram_map.h>
#include "hikey_private.h"
#define BL2_RW_BASE (BL_CODE_END)
static meminfo_t bl2_el3_tzram_layout;
static console_pl011_t console;
enum {
BOOT_MODE_RECOVERY = 0,
BOOT_MODE_NORMAL,
BOOT_MODE_MASK = 1,
};
/*******************************************************************************
* Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
* Return 0 on success, -1 otherwise.
******************************************************************************/
int plat_hikey_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
{
/* Enable MCU SRAM */
hisi_mcu_enable_sram();
/* Load MCU binary into SRAM */
hisi_mcu_load_image(scp_bl2_image_info->image_base,
scp_bl2_image_info->image_size);
/* Let MCU running */
hisi_mcu_start_run();
INFO("%s: MCU PC is at 0x%x\n",
__func__, mmio_read_32(AO_SC_MCU_SUBSYS_STAT2));
INFO("%s: AO_SC_PERIPH_CLKSTAT4 is 0x%x\n",
__func__, mmio_read_32(AO_SC_PERIPH_CLKSTAT4));
return 0;
}
/*******************************************************************************
* Gets SPSR for BL32 entry
******************************************************************************/
uint32_t hikey_get_spsr_for_bl32_entry(void)
{
/*
* The Secure Payload Dispatcher service is responsible for
* setting the SPSR prior to entry into the BL3-2 image.
*/
return 0;
}
/*******************************************************************************
* Gets SPSR for BL33 entry
******************************************************************************/
#ifdef __aarch64__
uint32_t hikey_get_spsr_for_bl33_entry(void)
{
unsigned int mode;
uint32_t spsr;
/* Figure out what mode we enter the non-secure world in */
mode = (el_implemented(2) != EL_IMPL_NONE) ? MODE_EL2 : MODE_EL1;
/*
* TODO: Consider the possibility of specifying the SPSR in
* the FIP ToC and allowing the platform to have a say as
* well.
*/
spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
return spsr;
}
#else
uint32_t hikey_get_spsr_for_bl33_entry(void)
{
unsigned int hyp_status, mode, spsr;
hyp_status = GET_VIRT_EXT(read_id_pfr1());
mode = (hyp_status) ? MODE32_hyp : MODE32_svc;
/*
* TODO: Consider the possibility of specifying the SPSR in
* the FIP ToC and allowing the platform to have a say as
* well.
*/
spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1,
SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
return spsr;
}
#endif /* __aarch64__ */
int bl2_plat_handle_pre_image_load(unsigned int image_id)
{
return hikey_set_fip_addr(image_id, "fastboot");
}
int hikey_bl2_handle_post_image_load(unsigned int image_id)
{
int err = 0;
bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
#ifdef SPD_opteed
bl_mem_params_node_t *pager_mem_params = NULL;
bl_mem_params_node_t *paged_mem_params = NULL;
#endif
assert(bl_mem_params);
switch (image_id) {
#ifdef __aarch64__
case BL32_IMAGE_ID:
#ifdef SPD_opteed
pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
assert(pager_mem_params);
paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
assert(paged_mem_params);
err = parse_optee_header(&bl_mem_params->ep_info,
&pager_mem_params->image_info,
&paged_mem_params->image_info);
if (err != 0) {
WARN("OPTEE header parse error.\n");
}
#endif
bl_mem_params->ep_info.spsr = hikey_get_spsr_for_bl32_entry();
break;
#endif
case BL33_IMAGE_ID:
/* BL33 expects to receive the primary CPU MPID (through r0) */
bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
bl_mem_params->ep_info.spsr = hikey_get_spsr_for_bl33_entry();
break;
#ifdef SCP_BL2_BASE
case SCP_BL2_IMAGE_ID:
/* The subsequent handling of SCP_BL2 is platform specific */
err = plat_hikey_bl2_handle_scp_bl2(&bl_mem_params->image_info);
if (err) {
WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
}
break;
#endif
default:
/* Do nothing in default case */
break;
}
return err;
}
/*******************************************************************************
* This function can be used by the platforms to update/use image
* information for given `image_id`.
******************************************************************************/
int bl2_plat_handle_post_image_load(unsigned int image_id)
{
return hikey_bl2_handle_post_image_load(image_id);
}
static void reset_dwmmc_clk(void)
{
unsigned int data;
/* disable mmc0 bus clock */
mmio_write_32(PERI_SC_PERIPH_CLKDIS0, PERI_CLK0_MMC0);
do {
data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
} while (data & PERI_CLK0_MMC0);
/* enable mmc0 bus clock */
mmio_write_32(PERI_SC_PERIPH_CLKEN0, PERI_CLK0_MMC0);
do {
data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
} while (!(data & PERI_CLK0_MMC0));
/* reset mmc0 clock domain */
mmio_write_32(PERI_SC_PERIPH_RSTEN0, PERI_RST0_MMC0);
/* bypass mmc0 clock phase */
data = mmio_read_32(PERI_SC_PERIPH_CTRL2);
data |= 3;
mmio_write_32(PERI_SC_PERIPH_CTRL2, data);
/* disable low power */
data = mmio_read_32(PERI_SC_PERIPH_CTRL13);
data |= 1 << 3;
mmio_write_32(PERI_SC_PERIPH_CTRL13, data);
do {
data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
} while (!(data & PERI_RST0_MMC0));
/* unreset mmc0 clock domain */
mmio_write_32(PERI_SC_PERIPH_RSTDIS0, PERI_RST0_MMC0);
do {
data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
} while (data & PERI_RST0_MMC0);
}
static void hikey_boardid_init(void)
{
u_register_t midr;
midr = read_midr();
mmio_write_32(MEMORY_AXI_CHIP_ADDR, midr);
INFO("[BDID] [%x] midr: 0x%x\n", MEMORY_AXI_CHIP_ADDR,
(unsigned int)midr);
mmio_write_32(MEMORY_AXI_BOARD_TYPE_ADDR, 0);
mmio_write_32(MEMORY_AXI_BOARD_ID_ADDR, 0x2b);
mmio_write_32(ACPU_ARM64_FLAGA, 0x1234);
mmio_write_32(ACPU_ARM64_FLAGB, 0x5678);
}
static void hikey_sd_init(void)
{
/* switch pinmux to SD */
mmio_write_32(IOMG_SD_CLK, IOMG_MUX_FUNC0);
mmio_write_32(IOMG_SD_CMD, IOMG_MUX_FUNC0);
mmio_write_32(IOMG_SD_DATA0, IOMG_MUX_FUNC0);
mmio_write_32(IOMG_SD_DATA1, IOMG_MUX_FUNC0);
mmio_write_32(IOMG_SD_DATA2, IOMG_MUX_FUNC0);
mmio_write_32(IOMG_SD_DATA3, IOMG_MUX_FUNC0);
mmio_write_32(IOCG_SD_CLK, IOCG_INPUT_16MA);
mmio_write_32(IOCG_SD_CMD, IOCG_INPUT_12MA);
mmio_write_32(IOCG_SD_DATA0, IOCG_INPUT_12MA);
mmio_write_32(IOCG_SD_DATA1, IOCG_INPUT_12MA);
mmio_write_32(IOCG_SD_DATA2, IOCG_INPUT_12MA);
mmio_write_32(IOCG_SD_DATA3, IOCG_INPUT_12MA);
/* set SD Card detect as nopull */
mmio_write_32(IOCG_GPIO8, 0);
}
static void hikey_jumper_init(void)
{
/* set jumper detect as nopull */
mmio_write_32(IOCG_GPIO24, 0);
/* set jumper detect as GPIO */
mmio_write_32(IOMG_GPIO24, IOMG_MUX_FUNC0);
}
void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
u_register_t arg3, u_register_t arg4)
{
/* Initialize the console to provide early debug support */
console_pl011_register(CONSOLE_BASE, PL011_UART_CLK_IN_HZ,
PL011_BAUDRATE, &console);
/*
* Allow BL2 to see the whole Trusted RAM.
*/
bl2_el3_tzram_layout.total_base = BL2_RW_BASE;
bl2_el3_tzram_layout.total_size = BL31_LIMIT - BL2_RW_BASE;
}
void bl2_el3_plat_arch_setup(void)
{
hikey_init_mmu_el3(bl2_el3_tzram_layout.total_base,
bl2_el3_tzram_layout.total_size,
BL_CODE_BASE,
BL_CODE_END,
BL_COHERENT_RAM_BASE,
BL_COHERENT_RAM_END);
}
void bl2_platform_setup(void)
{
dw_mmc_params_t params;
struct mmc_device_info info;
hikey_sp804_init();
hikey_gpio_init();
hikey_pmussi_init();
hikey_hi6553_init();
/* Clear SRAM since it'll be used by MCU right now. */
memset((void *)SRAM_BASE, 0, SRAM_SIZE);
dsb();
hikey_ddr_init(DDR_FREQ_800M);
hikey_security_setup();
hikey_boardid_init();
init_acpu_dvfs();
hikey_rtc_init();
hikey_sd_init();
hikey_jumper_init();
hikey_mmc_pll_init();
/* Clean SRAM before MCU used */
clean_dcache_range(SRAM_BASE, SRAM_SIZE);
reset_dwmmc_clk();
memset(&params, 0, sizeof(dw_mmc_params_t));
params.reg_base = DWMMC0_BASE;
params.desc_base = HIKEY_MMC_DESC_BASE;
params.desc_size = 1 << 20;
params.clk_rate = 24 * 1000 * 1000;
params.bus_width = MMC_BUS_WIDTH_8;
params.flags = MMC_FLAG_CMD23;
info.mmc_dev_type = MMC_IS_EMMC;
dw_mmc_init(&params, &info);
hikey_io_setup();
}