blob: aa987b3feb4217c9d9afb975bbfee025445e6b7d [file] [log] [blame]
/*
* Copyright (c) Linaro 2018 Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
#include <imx_uart.h>
#include <platform_def.h>
.globl imx_crash_uart_init
.globl imx_crash_uart_putc
/* -----------------------------------------------
* int imx_crash_uart_init(uintptr_t base_addr,
* unsigned int uart_clk, unsigned int baud_rate)
* Function to initialize the console without a
* C Runtime to print debug information. This
* function will be accessed by console_init and
* crash reporting.
* In: r0 - console base address
* r1 - Uart clock in Hz
* r2 - Baud rate
* Out: return 1 on success else 0 on error
* Clobber list : r1, r2, r3, r4
* -----------------------------------------------
*/
func imx_crash_uart_init
/* Free up r1 as a scratch reg */
mov r4, r0
mov r0, r1
/* Reset UART via CR2 */
add r1, r4, #IMX_UART_CR2_OFFSET
movs r3, #0
str r3, [r4, #IMX_UART_CR2_OFFSET]
/* Wait for reset complete */
__wait_cr2_reset:
ldr r3, [r1, #0]
ands r3, #IMX_UART_CR2_SRST
beq __wait_cr2_reset
/* Enable UART */
movs r3, #IMX_UART_CR1_UARTEN
mov r1, r2
str r3, [r4, #IMX_UART_CR1_OFFSET]
/*
* Ignore RTC/CTS - disable reset
* Magic value #16423 =>
* IMX_UART_CR2_IRTS | IMX_UART_CR2_WS | IMX_UART_CR2_TXEN | IMX_UART_CR2_RXEN | IMX_UART_CR2_SRST
*/
movw r3, #16423
str r3, [r4, #IMX_UART_CR2_OFFSET]
/*
* No parity, autobaud detect-old, rxdmuxsel=1 (fixed i.mx7)
* Magic value => #132
* IMX_UART_CR3_ADNIMP | IMX_UART_CR3_RXDMUXSEL
*/
movs r3, #132
str r3, [r4, #IMX_UART_CR3_OFFSET]
/*
* Set CTS FIFO trigger to 32 bytes bits 15:10
* Magic value => #32768
* FIFO trigger bitmask 100000
* */
mov r3, #32768
str r3, [r4, #IMX_UART_CR4_OFFSET]
/*
* TX/RX-thresh = 2 bytes, DCE (bit6 = 0), refclk @24MHz / 4
* Magic value #2562
* IMX_UART_FCR_TXTL(TX_RX_THRESH) | IMX_UART_FCR_RXTL(TX_RX_THRESH) | IMX_UART_FCR_RFDIV2
*/
#ifdef IMX_UART_DTE
movw r3, #2626
#else
movw r3, #2562
#endif
str r3, [r4, #IMX_UART_FCR_OFFSET]
/* This BIR should be set to 0x0F prior to writing the BMR */
movs r3, #15
str r3, [r4, #IMX_UART_BIR_OFFSET]
/* Hard-code to 115200 @ 24 MHz */
movs r0, #104
str r0, [r4, #IMX_UART_BMR_OFFSET]
/* Indicate success */
movs r0, #1
bx lr
endfunc imx_crash_uart_init
/* --------------------------------------------------------
* int imx_crash_uart_putc(int c, uintptr_t base_addr)
* Function to output a character over the console. It
* returns the character printed on success or -1 on error.
* In : r0 - character to be printed
* r1 - console base address
* Out : return -1 on error else return character.
* Clobber list : r2
* --------------------------------------------------------
*/
func imx_crash_uart_putc
/* Output specified character to UART shift-register */
str r0, [r1, #IMX_UART_TXD_OFFSET]
/* Wait for transmit IMX_UART_STAT2_OFFSET.IMX_UART_STAT2_TXDC == 1 */
__putc_spin_ready:
ldr r2, [r1, #IMX_UART_STAT2_OFFSET]
ands r2, #IMX_UART_STAT2_TXDC
beq __putc_spin_ready
/* Transmit complete do we need to fixup \n to \n\r */
cmp r0, #10
beq __putc_fixup_lf
/* No fixup necessary - exit here */
movs r0, #0
bx lr
/* Fixup \n to \n\r */
__putc_fixup_lf:
movs r0, #13
b imx_crash_uart_putc
endfunc imx_crash_uart_putc