Switch AARCH32/AARCH64 to __aarch64__

NOTE: AARCH32/AARCH64 macros are now deprecated in favor of __aarch64__.

All common C compilers pre-define the same macros to signal which
architecture the code is being compiled for: __arm__ for AArch32 (or
earlier versions) and __aarch64__ for AArch64. There's no need for TF-A
to define its own custom macros for this. In order to unify code with
the export headers (which use __aarch64__ to avoid another dependency),
let's deprecate the AARCH32 and AARCH64 macros and switch the code base
over to the pre-defined standard macro. (Since it is somewhat
unintuitive that __arm__ only means AArch32, let's standardize on only
using __aarch64__.)

Change-Id: Ic77de4b052297d77f38fc95f95f65a8ee70cf200
Signed-off-by: Julius Werner <jwerner@chromium.org>
diff --git a/Makefile b/Makefile
index beb0237..43ff8d2 100644
--- a/Makefile
+++ b/Makefile
@@ -734,12 +734,6 @@
                 $(eval $(call add_define,PRELOADED_BL33_BASE))
         endif
 endif
-# Define the AARCH32/AARCH64 flag based on the ARCH flag
-ifeq (${ARCH},aarch32)
-        $(eval $(call add_define,AARCH32))
-else
-        $(eval $(call add_define,AARCH64))
-endif
 
 # Define the DYN_DISABLE_AUTH flag only if set.
 ifeq (${DYN_DISABLE_AUTH},1)
@@ -771,6 +765,12 @@
 endif
 # __ASSEMBLY__ is deprecated in favor of the compiler-builtin __ASSEMBLER__.
 ASFLAGS	+= -D__ASSEMBLY__
+# AARCH32/AARCH64 macros are deprecated in favor of the compiler-builtin __aarch64__.
+ifeq (${ARCH},aarch32)
+        $(eval $(call add_define,AARCH32))
+else
+        $(eval $(call add_define,AARCH64))
+endif
 endif # !ERROR_DEPRECATED
 
 $(eval $(call MAKE_LIB_DIRS))
diff --git a/bl1/bl1_fwu.c b/bl1/bl1_fwu.c
index 76a4375..d222b9c 100644
--- a/bl1/bl1_fwu.c
+++ b/bl1/bl1_fwu.c
@@ -520,7 +520,7 @@
 
 	INFO("BL1-FWU: Executing Secure image\n");
 
-#ifdef AARCH64
+#ifdef __aarch64__
 	/* Save NS-EL1 system registers. */
 	cm_el1_sysregs_context_save(NON_SECURE);
 #endif
@@ -531,7 +531,7 @@
 	/* Update the secure image id. */
 	sec_exec_image_id = image_id;
 
-#ifdef AARCH64
+#ifdef __aarch64__
 	*handle = cm_get_context(SECURE);
 #else
 	*handle = smc_get_ctx(SECURE);
@@ -584,7 +584,7 @@
 	INFO("BL1-FWU: Resuming %s world context\n",
 		(resume_sec_state == SECURE) ? "secure" : "normal");
 
-#ifdef AARCH64
+#ifdef __aarch64__
 	/* Save the EL1 system registers of calling world. */
 	cm_el1_sysregs_context_save(caller_sec_state);
 
@@ -641,7 +641,7 @@
 	sec_exec_image_id = INVALID_IMAGE_ID;
 
 	INFO("BL1-FWU: Resuming Normal world context\n");
-#ifdef AARCH64
+#ifdef __aarch64__
 	/*
 	 * Secure world is done so no need to save the context.
 	 * Just restore the Non-Secure context.
diff --git a/bl1/bl1_main.c b/bl1/bl1_main.c
index fce14f5..d44b46d 100644
--- a/bl1/bl1_main.c
+++ b/bl1/bl1_main.c
@@ -59,7 +59,7 @@
 	/* Perform early platform-specific setup */
 	bl1_early_platform_setup();
 
-#ifdef AARCH64
+#ifdef __aarch64__
 	/*
 	 * Update pointer authentication key before the MMU is enabled. It is
 	 * saved in the rodata section, that can be writen before enabling the
@@ -67,7 +67,7 @@
 	 * in the early platform setup.
 	 */
 	bl_handle_pauth();
-#endif /* AARCH64 */
+#endif /* __aarch64__ */
 
 	/* Perform late platform-specific setup */
 	bl1_plat_arch_setup();
@@ -97,10 +97,10 @@
 	/*
 	 * Ensure that MMU/Caches and coherency are turned on
 	 */
-#ifdef AARCH32
-	val = read_sctlr();
-#else
+#ifdef __aarch64__
 	val = read_sctlr_el3();
+#else
+	val = read_sctlr();
 #endif
 	assert(val & SCTLR_M_BIT);
 	assert(val & SCTLR_C_BIT);
@@ -198,11 +198,11 @@
  ******************************************************************************/
 void bl1_print_next_bl_ep_info(const entry_point_info_t *bl_ep_info)
 {
-#ifdef AARCH32
-	NOTICE("BL1: Booting BL32\n");
-#else
+#ifdef __aarch64__
 	NOTICE("BL1: Booting BL31\n");
-#endif /* AARCH32 */
+#else
+	NOTICE("BL1: Booting BL32\n");
+#endif /* __aarch64__ */
 	print_entry_point_info(bl_ep_info);
 }
 
diff --git a/bl2/bl2_main.c b/bl2/bl2_main.c
index 7d8d60c..79b0e71 100644
--- a/bl2/bl2_main.c
+++ b/bl2/bl2_main.c
@@ -15,10 +15,10 @@
 
 #include "bl2_private.h"
 
-#ifdef AARCH32
-#define NEXT_IMAGE	"BL32"
-#else
+#ifdef __aarch64__
 #define NEXT_IMAGE	"BL31"
+#else
+#define NEXT_IMAGE	"BL32"
 #endif
 
 #if !BL2_AT_EL3
@@ -31,7 +31,7 @@
 	/* Perform early platform-specific setup */
 	bl2_early_platform_setup2(arg0, arg1, arg2, arg3);
 
-#ifdef AARCH64
+#ifdef __aarch64__
 	/*
 	 * Update pointer authentication key before the MMU is enabled. It is
 	 * saved in the rodata section, that can be writen before enabling the
@@ -39,7 +39,7 @@
 	 * in the early platform setup.
 	 */
 	bl_handle_pauth();
-#endif /* AARCH64 */
+#endif /* __aarch64__ */
 
 	/* Perform late platform-specific setup */
 	bl2_plat_arch_setup();
@@ -55,7 +55,7 @@
 	/* Perform early platform-specific setup */
 	bl2_el3_early_platform_setup(arg0, arg1, arg2, arg3);
 
-#ifdef AARCH64
+#ifdef __aarch64__
 	/*
 	 * Update pointer authentication key before the MMU is enabled. It is
 	 * saved in the rodata section, that can be writen before enabling the
@@ -63,7 +63,7 @@
 	 * in the early platform setup.
 	 */
 	bl_handle_pauth();
-#endif /* AARCH64 */
+#endif /* __aarch64__ */
 
 	/* Perform late platform-specific setup */
 	bl2_el3_plat_arch_setup();
@@ -97,14 +97,14 @@
 	next_bl_ep_info = bl2_load_images();
 
 #if !BL2_AT_EL3
-#ifdef AARCH32
+#ifndef __aarch64__
 	/*
 	 * For AArch32 state BL1 and BL2 share the MMU setup.
 	 * Given that BL2 does not map BL1 regions, MMU needs
 	 * to be disabled in order to go back to BL1.
 	 */
 	disable_mmu_icache_secure();
-#endif /* AARCH32 */
+#endif /* !__aarch64__ */
 
 	console_flush();
 
diff --git a/bl2u/bl2u_main.c b/bl2u/bl2u_main.c
index d3c83cc..d49c9ce 100644
--- a/bl2u/bl2u_main.c
+++ b/bl2u/bl2u_main.c
@@ -45,14 +45,14 @@
 
 	console_flush();
 
-#ifdef AARCH32
+#ifndef __aarch64__
 	/*
 	 * For AArch32 state BL1 and BL2U share the MMU setup.
 	 * Given that BL2U does not map BL1 regions, MMU needs
 	 * to be disabled in order to go back to BL1.
 	 */
 	disable_mmu_icache_secure();
-#endif /* AARCH32 */
+#endif /* !__aarch64__ */
 
 	/*
 	 * Indicate that BL2U is done and resume back to
diff --git a/common/backtrace/backtrace.c b/common/backtrace/backtrace.c
index 53f8b07..506d4a4 100644
--- a/common/backtrace/backtrace.c
+++ b/common/backtrace/backtrace.c
@@ -93,7 +93,7 @@
  * Returns true if the address points to a virtual address that can be read at
  * the current EL, false otherwise.
  */
-#ifdef AARCH64
+#ifdef __aarch64__
 static bool is_address_readable(uintptr_t addr)
 {
 	unsigned int el = get_current_el();
@@ -123,7 +123,7 @@
 
 	return true;
 }
-#else /* if AARCH32 */
+#else /* !__aarch64__ */
 static bool is_address_readable(uintptr_t addr)
 {
 	unsigned int el = get_current_el();
@@ -144,7 +144,7 @@
 
 	return true;
 }
-#endif
+#endif /* __aarch64__ */
 
 /*
  * Returns true if all the bytes in a given object are in mapped memory and an
@@ -207,7 +207,7 @@
  */
 static struct frame_record *adjust_frame_record(struct frame_record *fr)
 {
-#ifdef AARCH64
+#ifdef __aarch64__
 	return fr;
 #else
 	return (struct frame_record *)((uintptr_t)fr - 4U);
diff --git a/common/bl_common.c b/common/bl_common.c
index 61f031b..a09cd71 100644
--- a/common/bl_common.c
+++ b/common/bl_common.c
@@ -236,7 +236,7 @@
 	PRINT_IMAGE_ARG(1);
 	PRINT_IMAGE_ARG(2);
 	PRINT_IMAGE_ARG(3);
-#ifndef AARCH32
+#ifdef __aarch64__
 	PRINT_IMAGE_ARG(4);
 	PRINT_IMAGE_ARG(5);
 	PRINT_IMAGE_ARG(6);
@@ -245,7 +245,7 @@
 #undef PRINT_IMAGE_ARG
 }
 
-#ifdef AARCH64
+#ifdef __aarch64__
 /*******************************************************************************
  * Handle all possible cases regarding ARMv8.3-PAuth.
  ******************************************************************************/
@@ -293,4 +293,4 @@
 
 #endif /* ENABLE_PAUTH */
 }
-#endif /* AARCH64 */
+#endif /* __aarch64__ */
diff --git a/drivers/arm/ccn/ccn.c b/drivers/arm/ccn/ccn.c
index d184054..d0c5abc 100644
--- a/drivers/arm/ccn/ccn.c
+++ b/drivers/arm/ccn/ccn.c
@@ -17,7 +17,7 @@
 #include "ccn_private.h"
 
 static const ccn_desc_t *ccn_plat_desc;
-#if defined(IMAGE_BL31) || (defined(AARCH32) && defined(IMAGE_BL32))
+#if defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32))
 DEFINE_BAKERY_LOCK(ccn_lock);
 #endif
 
@@ -264,7 +264,7 @@
 	assert(ccn_plat_desc);
 	assert(ccn_plat_desc->periphbase);
 
-#if defined(IMAGE_BL31) || (defined(AARCH32) && defined(IMAGE_BL32))
+#if defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32))
 	bakery_lock_get(&ccn_lock);
 #endif
 	start_region_id = region_id;
@@ -284,7 +284,7 @@
 						   rn_id_map);
 	}
 
-#if defined(IMAGE_BL31) || (defined(AARCH32) && defined(IMAGE_BL32))
+#if defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32))
 	bakery_lock_release(&ccn_lock);
 #endif
 }
diff --git a/drivers/arm/gic/v3/gicv3_main.c b/drivers/arm/gic/v3/gicv3_main.c
index a94dbf6..94a20ba 100644
--- a/drivers/arm/gic/v3/gicv3_main.c
+++ b/drivers/arm/gic/v3/gicv3_main.c
@@ -73,12 +73,12 @@
 	       plat_driver_data->interrupt_props != NULL : 1);
 
 	/* Check for system register support */
-#ifdef AARCH32
-	assert((read_id_pfr1() & (ID_PFR1_GIC_MASK << ID_PFR1_GIC_SHIFT)) != 0U);
-#else
+#ifdef __aarch64__
 	assert((read_id_aa64pfr0_el1() &
 			(ID_AA64PFR0_GIC_MASK << ID_AA64PFR0_GIC_SHIFT)) != 0U);
-#endif /* AARCH32 */
+#else
+	assert((read_id_pfr1() & (ID_PFR1_GIC_MASK << ID_PFR1_GIC_SHIFT)) != 0U);
+#endif /* __aarch64__ */
 
 	/* The GIC version should be 3.0 */
 	gic_version = gicd_read_pidr2(plat_driver_data->gicd_base);
diff --git a/drivers/arm/gic/v3/gicv3_private.h b/drivers/arm/gic/v3/gicv3_private.h
index 92066e1..327a9a1 100644
--- a/drivers/arm/gic/v3/gicv3_private.h
+++ b/drivers/arm/gic/v3/gicv3_private.h
@@ -40,17 +40,17 @@
  * Macro to convert a GICR_TYPER affinity value into a MPIDR value. Bits[31:24]
  * are zeroes.
  */
-#ifdef AARCH32
-static inline u_register_t mpidr_from_gicr_typer(uint64_t typer_val)
-{
-	return (((typer_val) >> 32) & U(0xffffff));
-}
-#else
+#ifdef __aarch64__
 static inline u_register_t mpidr_from_gicr_typer(uint64_t typer_val)
 {
 	return (((typer_val >> 56) & MPIDR_AFFLVL_MASK) << MPIDR_AFF3_SHIFT) |
 		((typer_val >> 32) & U(0xffffff));
 }
+#else
+static inline u_register_t mpidr_from_gicr_typer(uint64_t typer_val)
+{
+	return (((typer_val) >> 32) & U(0xffffff));
+}
 #endif
 
 /*******************************************************************************
diff --git a/include/common/ep_info.h b/include/common/ep_info.h
index 2998150..4bfa1fa 100644
--- a/include/common/ep_info.h
+++ b/include/common/ep_info.h
@@ -41,7 +41,7 @@
 		__builtin_offsetof(entry_point_info_t, pc), \
 		assert_BL31_pc_offset_mismatch);
 
-#ifdef AARCH32
+#ifndef __aarch64__
 CASSERT(ENTRY_POINT_INFO_LR_SVC_OFFSET ==
 		__builtin_offsetof(entry_point_info_t, lr_svc),
 		assert_entrypoint_lr_offset_error);
diff --git a/include/common/runtime_svc.h b/include/common/runtime_svc.h
index 3b0a224..472a32a 100644
--- a/include/common/runtime_svc.h
+++ b/include/common/runtime_svc.h
@@ -20,15 +20,15 @@
  * Constants to allow the assembler access a runtime service
  * descriptor
  */
-#ifdef AARCH32
-#define RT_SVC_SIZE_LOG2	U(4)
-#define RT_SVC_DESC_INIT	U(8)
-#define RT_SVC_DESC_HANDLE	U(12)
-#else
+#ifdef __aarch64__
 #define RT_SVC_SIZE_LOG2	U(5)
 #define RT_SVC_DESC_INIT	U(16)
 #define RT_SVC_DESC_HANDLE	U(24)
-#endif /* AARCH32 */
+#else
+#define RT_SVC_SIZE_LOG2	U(4)
+#define RT_SVC_DESC_INIT	U(8)
+#define RT_SVC_DESC_HANDLE	U(12)
+#endif /* __aarch64__ */
 #define SIZEOF_RT_SVC_DESC	(U(1) << RT_SVC_SIZE_LOG2)
 
 
diff --git a/include/lib/el3_runtime/context_mgmt.h b/include/lib/el3_runtime/context_mgmt.h
index f23f9cd..7c996d1 100644
--- a/include/lib/el3_runtime/context_mgmt.h
+++ b/include/lib/el3_runtime/context_mgmt.h
@@ -35,7 +35,7 @@
 void cm_setup_context(cpu_context_t *ctx, const entry_point_info_t *ep);
 void cm_prepare_el3_exit(uint32_t security_state);
 
-#ifndef AARCH32
+#ifdef __aarch64__
 void cm_el1_sysregs_context_save(uint32_t security_state);
 void cm_el1_sysregs_context_restore(uint32_t security_state);
 void cm_set_elr_el3(uint32_t security_state, uintptr_t entrypoint);
@@ -78,6 +78,6 @@
 #else
 void *cm_get_next_context(void);
 void cm_set_next_context(void *context);
-#endif /* AARCH32 */
+#endif /* __aarch64__ */
 
 #endif /* CONTEXT_MGMT_H */
diff --git a/include/lib/el3_runtime/cpu_data.h b/include/lib/el3_runtime/cpu_data.h
index 66c47ab..55db4cf 100644
--- a/include/lib/el3_runtime/cpu_data.h
+++ b/include/lib/el3_runtime/cpu_data.h
@@ -11,15 +11,7 @@
 
 #include <bl31/ehf.h>
 
-#ifdef AARCH32
-
-#if CRASH_REPORTING
-#error "Crash reporting is not supported in AArch32"
-#endif
-#define CPU_DATA_CPU_OPS_PTR		0x0
-#define CPU_DATA_CRASH_BUF_OFFSET	0x4
-
-#else /* AARCH32 */
+#ifdef __aarch64__
 
 /* Offsets for the cpu_data structure */
 #define CPU_DATA_CRASH_BUF_OFFSET	0x18
@@ -27,7 +19,15 @@
 #define CPU_DATA_CRASH_BUF_SIZE		64
 #define CPU_DATA_CPU_OPS_PTR		0x10
 
-#endif /* AARCH32 */
+#else /* __aarch64__ */
+
+#if CRASH_REPORTING
+#error "Crash reporting is not supported in AArch32"
+#endif
+#define CPU_DATA_CPU_OPS_PTR		0x0
+#define CPU_DATA_CRASH_BUF_OFFSET	0x4
+
+#endif /* __aarch64__ */
 
 #if CRASH_REPORTING
 #define CPU_DATA_CRASH_BUF_END		(CPU_DATA_CRASH_BUF_OFFSET + \
@@ -84,7 +84,7 @@
  * used for this.
  ******************************************************************************/
 typedef struct cpu_data {
-#ifndef AARCH32
+#ifdef __aarch64__
 	void *cpu_context[2];
 #endif
 	uintptr_t cpu_ops_ptr;
@@ -127,7 +127,7 @@
 
 struct cpu_data *_cpu_data_by_index(uint32_t cpu_index);
 
-#ifndef AARCH32
+#ifdef __aarch64__
 /* Return the cpu_data structure for the current CPU. */
 static inline struct cpu_data *_cpu_data(void)
 {
diff --git a/include/lib/el3_runtime/pubsub_events.h b/include/lib/el3_runtime/pubsub_events.h
index 8e4a87a..5012082 100644
--- a/include/lib/el3_runtime/pubsub_events.h
+++ b/include/lib/el3_runtime/pubsub_events.h
@@ -24,7 +24,7 @@
 REGISTER_PUBSUB_EVENT(psci_suspend_pwrdown_start);
 REGISTER_PUBSUB_EVENT(psci_suspend_pwrdown_finish);
 
-#ifdef AARCH64
+#ifdef __aarch64__
 /*
  * These events are published by the AArch64 context management framework
  * after the secure context is restored/saved via
@@ -40,4 +40,4 @@
  */
 REGISTER_PUBSUB_EVENT(cm_entering_normal_world);
 REGISTER_PUBSUB_EVENT(cm_exited_normal_world);
-#endif /* AARCH64 */
+#endif /* __aarch64__ */
diff --git a/include/lib/utils_def.h b/include/lib/utils_def.h
index 7098bac..35ae33a 100644
--- a/include/lib/utils_def.h
+++ b/include/lib/utils_def.h
@@ -21,10 +21,10 @@
 #define BIT_32(nr)			(U(1) << (nr))
 #define BIT_64(nr)			(ULL(1) << (nr))
 
-#ifdef AARCH32
-#define BIT				BIT_32
-#else
+#ifdef __aarch64__
 #define BIT				BIT_64
+#else
+#define BIT				BIT_32
 #endif
 
 /*
@@ -46,10 +46,10 @@
 	(((~UINT64_C(0)) << (l)) & (~UINT64_C(0) >> (64 - 1 - (h))))
 #endif
 
-#ifdef AARCH32
-#define GENMASK				GENMASK_32
-#else
+#ifdef __aarch64__
 #define GENMASK				GENMASK_64
+#else
+#define GENMASK				GENMASK_32
 #endif
 
 /*
@@ -109,10 +109,10 @@
 	((_u32) > (UINT32_MAX - (_inc)))
 
 /* Register size of the current architecture. */
-#ifdef AARCH32
-#define REGSZ		U(4)
-#else
+#ifdef __aarch64__
 #define REGSZ		U(8)
+#else
+#define REGSZ		U(4)
 #endif
 
 /*
diff --git a/include/lib/xlat_tables/xlat_mmu_helpers.h b/include/lib/xlat_tables/xlat_mmu_helpers.h
index efe0dd5..abdf1b6 100644
--- a/include/lib/xlat_tables/xlat_mmu_helpers.h
+++ b/include/lib/xlat_tables/xlat_mmu_helpers.h
@@ -65,14 +65,7 @@
 		   const uint64_t *base_table, unsigned long long max_pa,
 		   uintptr_t max_va, int xlat_regime);
 
-#ifdef AARCH32
-/* AArch32 specific translation table API */
-void enable_mmu_svc_mon(unsigned int flags);
-void enable_mmu_hyp(unsigned int flags);
-
-void enable_mmu_direct_svc_mon(unsigned int flags);
-void enable_mmu_direct_hyp(unsigned int flags);
-#else
+#ifdef __aarch64__
 /* AArch64 specific translation table APIs */
 void enable_mmu_el1(unsigned int flags);
 void enable_mmu_el2(unsigned int flags);
@@ -81,7 +74,14 @@
 void enable_mmu_direct_el1(unsigned int flags);
 void enable_mmu_direct_el2(unsigned int flags);
 void enable_mmu_direct_el3(unsigned int flags);
-#endif /* AARCH32 */
+#else
+/* AArch32 specific translation table API */
+void enable_mmu_svc_mon(unsigned int flags);
+void enable_mmu_hyp(unsigned int flags);
+
+void enable_mmu_direct_svc_mon(unsigned int flags);
+void enable_mmu_direct_hyp(unsigned int flags);
+#endif /* __aarch64__ */
 
 bool xlat_arch_is_granule_size_supported(size_t size);
 size_t xlat_arch_get_max_supported_granule_size(void);
diff --git a/include/lib/xlat_tables/xlat_tables_arch.h b/include/lib/xlat_tables/xlat_tables_arch.h
index 7237534..0ce0cac 100644
--- a/include/lib/xlat_tables/xlat_tables_arch.h
+++ b/include/lib/xlat_tables/xlat_tables_arch.h
@@ -7,10 +7,10 @@
 #ifndef XLAT_TABLES_ARCH_H
 #define XLAT_TABLES_ARCH_H
 
-#ifdef AARCH32
-#include "aarch32/xlat_tables_aarch32.h"
-#else
+#ifdef __aarch64__
 #include "aarch64/xlat_tables_aarch64.h"
+#else
+#include "aarch32/xlat_tables_aarch32.h"
 #endif
 
 /*
diff --git a/include/lib/xlat_tables/xlat_tables_defs.h b/include/lib/xlat_tables/xlat_tables_defs.h
index 000811f..76cfc0b 100644
--- a/include/lib/xlat_tables/xlat_tables_defs.h
+++ b/include/lib/xlat_tables/xlat_tables_defs.h
@@ -62,7 +62,7 @@
 #define OSH			(U(0x2) << 6)
 #define ISH			(U(0x3) << 6)
 
-#ifdef AARCH64
+#ifdef __aarch64__
 /* Guarded Page bit */
 #define GP			(ULL(1) << 50)
 #endif
diff --git a/include/plat/arm/common/arm_def.h b/include/plat/arm/common/arm_def.h
index ead1a8b..53bd13f 100644
--- a/include/plat/arm/common/arm_def.h
+++ b/include/plat/arm/common/arm_def.h
@@ -434,7 +434,7 @@
 #endif
 #endif
 
-#if defined(AARCH32) || JUNO_AARCH32_EL3_RUNTIME
+#if !defined(__aarch64__) || JUNO_AARCH32_EL3_RUNTIME
 /*******************************************************************************
  * BL32 specific defines for EL3 runtime in AArch32 mode
  ******************************************************************************/
@@ -498,17 +498,17 @@
 # else
 #  error "Unsupported ARM_TSP_RAM_LOCATION_ID value"
 # endif
-#endif /* AARCH32 || JUNO_AARCH32_EL3_RUNTIME */
+#endif /* !__aarch64__ || JUNO_AARCH32_EL3_RUNTIME */
 
 /*
  * BL32 is mandatory in AArch32. In AArch64, undefine BL32_BASE if there is no
  * SPD and no SPM, as they are the only ones that can be used as BL32.
  */
-#if !(defined(AARCH32) || JUNO_AARCH32_EL3_RUNTIME)
+#if defined(__aarch64__) && !JUNO_AARCH32_EL3_RUNTIME
 # if defined(SPD_none) && !ENABLE_SPM
 #  undef BL32_BASE
 # endif /* defined(SPD_none) && !ENABLE_SPM */
-#endif /* !(defined(AARCH32) || JUNO_AARCH32_EL3_RUNTIME) */
+#endif /* defined(__aarch64__) && !JUNO_AARCH32_EL3_RUNTIME */
 
 /*******************************************************************************
  * FWU Images: NS_BL1U, BL2U & NS_BL2U defines.
diff --git a/include/plat/arm/common/plat_arm.h b/include/plat/arm/common/plat_arm.h
index c8260e8..07a46c5 100644
--- a/include/plat/arm/common/plat_arm.h
+++ b/include/plat/arm/common/plat_arm.h
@@ -69,7 +69,7 @@
 
 void arm_setup_romlib(void);
 
-#if defined(IMAGE_BL31) || (defined(AARCH32) && defined(IMAGE_BL32))
+#if defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32))
 /*
  * Use this macro to instantiate lock before it is used in below
  * arm_lock_xxx() macros
@@ -102,7 +102,7 @@
 #define arm_lock_get()
 #define arm_lock_release()
 
-#endif /* defined(IMAGE_BL31) || (defined(AARCH32) && defined(IMAGE_BL32)) */
+#endif /* defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32)) */
 
 #if ARM_RECOM_STATE_ID_ENC
 /*
diff --git a/include/plat/common/common_def.h b/include/plat/common/common_def.h
index 66c88ba..14ae603 100644
--- a/include/plat/common/common_def.h
+++ b/include/plat/common/common_def.h
@@ -20,13 +20,13 @@
 /*
  * Platform binary types for linking
  */
-#ifdef AARCH32
-#define PLATFORM_LINKER_FORMAT          "elf32-littlearm"
-#define PLATFORM_LINKER_ARCH            arm
-#else
+#ifdef __aarch64__
 #define PLATFORM_LINKER_FORMAT          "elf64-littleaarch64"
 #define PLATFORM_LINKER_ARCH            aarch64
-#endif /* AARCH32 */
+#else
+#define PLATFORM_LINKER_FORMAT          "elf32-littlearm"
+#define PLATFORM_LINKER_ARCH            arm
+#endif /* __aarch64__ */
 
 /*
  * Generic platform constants
diff --git a/lib/cpus/errata_report.c b/lib/cpus/errata_report.c
index aeb3560..f43b217 100644
--- a/lib/cpus/errata_report.c
+++ b/lib/cpus/errata_report.c
@@ -18,9 +18,9 @@
 
 #ifdef IMAGE_BL1
 # define BL_STRING	"BL1"
-#elif defined(AARCH64) && defined(IMAGE_BL31)
+#elif defined(__aarch64__) && defined(IMAGE_BL31)
 # define BL_STRING	"BL31"
-#elif defined(AARCH32) && defined(IMAGE_BL32)
+#elif !defined(__arch64__) && defined(IMAGE_BL32)
 # define BL_STRING	"BL32"
 #elif defined(IMAGE_BL2) && BL2_AT_EL3
 # define BL_STRING "BL2"
diff --git a/lib/locks/bakery/bakery_lock_normal.c b/lib/locks/bakery/bakery_lock_normal.c
index cc13fc1..f906f51 100644
--- a/lib/locks/bakery/bakery_lock_normal.c
+++ b/lib/locks/bakery/bakery_lock_normal.c
@@ -167,10 +167,10 @@
 	unsigned int their_bakery_data;
 
 	me = plat_my_core_pos();
-#ifdef AARCH32
-	is_cached = read_sctlr() & SCTLR_C_BIT;
-#else
+#ifdef __aarch64__
 	is_cached = read_sctlr_el3() & SCTLR_C_BIT;
+#else
+	is_cached = read_sctlr() & SCTLR_C_BIT;
 #endif
 
 	/* Get a ticket */
@@ -228,10 +228,10 @@
 void bakery_lock_release(bakery_lock_t *lock)
 {
 	bakery_info_t *my_bakery_info;
-#ifdef AARCH32
-	unsigned int is_cached = read_sctlr() & SCTLR_C_BIT;
-#else
+#ifdef __aarch64__
 	unsigned int is_cached = read_sctlr_el3() & SCTLR_C_BIT;
+#else
+	unsigned int is_cached = read_sctlr() & SCTLR_C_BIT;
 #endif
 
 	my_bakery_info = get_bakery_info(plat_my_core_pos(), lock);
diff --git a/lib/optee/optee_utils.c b/lib/optee/optee_utils.c
index f7392fd..2a40793 100644
--- a/lib/optee/optee_utils.c
+++ b/lib/optee/optee_utils.c
@@ -176,7 +176,7 @@
 	 */
 	if (!tee_validate_header(header)) {
 		INFO("Invalid OPTEE header, set legacy mode.\n");
-#ifdef AARCH64
+#ifdef __aarch64__
 		header_ep->args.arg0 = MODE_RW_64;
 #else
 		header_ep->args.arg0 = MODE_RW_32;
@@ -222,7 +222,7 @@
 	if (header->arch == 0) {
 		header_ep->args.arg0 = MODE_RW_32;
 	} else {
-#ifdef AARCH64
+#ifdef __aarch64__
 		header_ep->args.arg0 = MODE_RW_64;
 #else
 		ERROR("Cannot boot an AArch64 OP-TEE\n");
diff --git a/lib/psci/psci_common.c b/lib/psci/psci_common.c
index 3f5e989..5d24356 100644
--- a/lib/psci/psci_common.c
+++ b/lib/psci/psci_common.c
@@ -619,53 +619,7 @@
  * This function determines the full entrypoint information for the requested
  * PSCI entrypoint on power on/resume and returns it.
  ******************************************************************************/
-#ifdef AARCH32
-static int psci_get_ns_ep_info(entry_point_info_t *ep,
-			       uintptr_t entrypoint,
-			       u_register_t context_id)
-{
-	u_register_t ep_attr;
-	unsigned int aif, ee, mode;
-	u_register_t scr = read_scr();
-	u_register_t ns_sctlr, sctlr;
-
-	/* Switch to non secure state */
-	write_scr(scr | SCR_NS_BIT);
-	isb();
-	ns_sctlr = read_sctlr();
-
-	sctlr = scr & SCR_HCE_BIT ? read_hsctlr() : ns_sctlr;
-
-	/* Return to original state */
-	write_scr(scr);
-	isb();
-	ee = 0;
-
-	ep_attr = NON_SECURE | EP_ST_DISABLE;
-	if (sctlr & SCTLR_EE_BIT) {
-		ep_attr |= EP_EE_BIG;
-		ee = 1;
-	}
-	SET_PARAM_HEAD(ep, PARAM_EP, VERSION_1, ep_attr);
-
-	ep->pc = entrypoint;
-	zeromem(&ep->args, sizeof(ep->args));
-	ep->args.arg0 = context_id;
-
-	mode = scr & SCR_HCE_BIT ? MODE32_hyp : MODE32_svc;
-
-	/*
-	 * TODO: Choose async. exception bits if HYP mode is not
-	 * implemented according to the values of SCR.{AW, FW} bits
-	 */
-	aif = SPSR_ABT_BIT | SPSR_IRQ_BIT | SPSR_FIQ_BIT;
-
-	ep->spsr = SPSR_MODE32(mode, entrypoint & 0x1, ee, aif);
-
-	return PSCI_E_SUCCESS;
-}
-
-#else
+#ifdef __aarch64__
 static int psci_get_ns_ep_info(entry_point_info_t *ep,
 			       uintptr_t entrypoint,
 			       u_register_t context_id)
@@ -722,7 +676,53 @@
 
 	return PSCI_E_SUCCESS;
 }
-#endif
+#else /* !__aarch64__ */
+static int psci_get_ns_ep_info(entry_point_info_t *ep,
+			       uintptr_t entrypoint,
+			       u_register_t context_id)
+{
+	u_register_t ep_attr;
+	unsigned int aif, ee, mode;
+	u_register_t scr = read_scr();
+	u_register_t ns_sctlr, sctlr;
+
+	/* Switch to non secure state */
+	write_scr(scr | SCR_NS_BIT);
+	isb();
+	ns_sctlr = read_sctlr();
+
+	sctlr = scr & SCR_HCE_BIT ? read_hsctlr() : ns_sctlr;
+
+	/* Return to original state */
+	write_scr(scr);
+	isb();
+	ee = 0;
+
+	ep_attr = NON_SECURE | EP_ST_DISABLE;
+	if (sctlr & SCTLR_EE_BIT) {
+		ep_attr |= EP_EE_BIG;
+		ee = 1;
+	}
+	SET_PARAM_HEAD(ep, PARAM_EP, VERSION_1, ep_attr);
+
+	ep->pc = entrypoint;
+	zeromem(&ep->args, sizeof(ep->args));
+	ep->args.arg0 = context_id;
+
+	mode = scr & SCR_HCE_BIT ? MODE32_hyp : MODE32_svc;
+
+	/*
+	 * TODO: Choose async. exception bits if HYP mode is not
+	 * implemented according to the values of SCR.{AW, FW} bits
+	 */
+	aif = SPSR_ABT_BIT | SPSR_IRQ_BIT | SPSR_FIQ_BIT;
+
+	ep->spsr = SPSR_MODE32(mode, entrypoint & 0x1, ee, aif);
+
+	return PSCI_E_SUCCESS;
+}
+
+#endif /* __aarch64__ */
 
 /*******************************************************************************
  * This function validates the entrypoint with the platform layer if the
diff --git a/lib/xlat_tables_v2/xlat_tables_context.c b/lib/xlat_tables_v2/xlat_tables_context.c
index bf3ae1e..f4b64b3 100644
--- a/lib/xlat_tables_v2/xlat_tables_context.c
+++ b/lib/xlat_tables_v2/xlat_tables_context.c
@@ -136,25 +136,7 @@
 #define MAX_PHYS_ADDR	tf_xlat_ctx.max_pa
 #endif
 
-#ifdef AARCH32
-
-void enable_mmu_svc_mon(unsigned int flags)
-{
-	setup_mmu_cfg((uint64_t *)&mmu_cfg_params, flags,
-		      tf_xlat_ctx.base_table, MAX_PHYS_ADDR,
-		      tf_xlat_ctx.va_max_address, EL1_EL0_REGIME);
-	enable_mmu_direct_svc_mon(flags);
-}
-
-void enable_mmu_hyp(unsigned int flags)
-{
-	setup_mmu_cfg((uint64_t *)&mmu_cfg_params, flags,
-		      tf_xlat_ctx.base_table, MAX_PHYS_ADDR,
-		      tf_xlat_ctx.va_max_address, EL2_REGIME);
-	enable_mmu_direct_hyp(flags);
-}
-
-#else
+#ifdef __aarch64__
 
 void enable_mmu_el1(unsigned int flags)
 {
@@ -180,4 +162,22 @@
 	enable_mmu_direct_el3(flags);
 }
 
-#endif /* AARCH32 */
+#else /* !__aarch64__ */
+
+void enable_mmu_svc_mon(unsigned int flags)
+{
+	setup_mmu_cfg((uint64_t *)&mmu_cfg_params, flags,
+		      tf_xlat_ctx.base_table, MAX_PHYS_ADDR,
+		      tf_xlat_ctx.va_max_address, EL1_EL0_REGIME);
+	enable_mmu_direct_svc_mon(flags);
+}
+
+void enable_mmu_hyp(unsigned int flags)
+{
+	setup_mmu_cfg((uint64_t *)&mmu_cfg_params, flags,
+		      tf_xlat_ctx.base_table, MAX_PHYS_ADDR,
+		      tf_xlat_ctx.va_max_address, EL2_REGIME);
+	enable_mmu_direct_hyp(flags);
+}
+
+#endif /* __aarch64__ */
diff --git a/lib/xlat_tables_v2/xlat_tables_utils.c b/lib/xlat_tables_v2/xlat_tables_utils.c
index 761d00c..232142e 100644
--- a/lib/xlat_tables_v2/xlat_tables_utils.c
+++ b/lib/xlat_tables_v2/xlat_tables_utils.c
@@ -97,7 +97,7 @@
 
 	printf(((LOWER_ATTRS(NS) & desc) != 0ULL) ? "-NS" : "-S");
 
-#ifdef AARCH64
+#ifdef __aarch64__
 	/* Check Guarded Page bit */
 	if ((desc & GP) != 0ULL) {
 		printf("-GP");
diff --git a/make_helpers/build_macros.mk b/make_helpers/build_macros.mk
index 4a9677b..b89d87e 100644
--- a/make_helpers/build_macros.mk
+++ b/make_helpers/build_macros.mk
@@ -273,7 +273,7 @@
 
 $(1): $(2) $(filter-out %.d,$(MAKEFILE_LIST)) | bl$(3)_dirs
 	$$(ECHO) "  PP      $$<"
-	$$(Q)$$(CPP) $$(CPPFLAGS) -P -x assembler-with-cpp -D__LINKER__ $(MAKE_DEP) -D$(IMAGE) -o $$@ $$<
+	$$(Q)$$(CPP) $$(CPPFLAGS) $(TF_CFLAGS_$(ARCH)) -P -x assembler-with-cpp -D__LINKER__ $(MAKE_DEP) -D$(IMAGE) -o $$@ $$<
 
 -include $(DEP)
 
diff --git a/plat/arm/board/fvp/fvp_common.c b/plat/arm/board/fvp/fvp_common.c
index b885b47..36cd500 100644
--- a/plat/arm/board/fvp/fvp_common.c
+++ b/plat/arm/board/fvp/fvp_common.c
@@ -81,7 +81,7 @@
 	MAP_DEVICE0,
 	MAP_DEVICE1,
 	ARM_MAP_NS_DRAM1,
-#ifdef AARCH64
+#ifdef __aarch64__
 	ARM_MAP_DRAM2,
 #endif
 #ifdef SPD_tspd
@@ -150,7 +150,7 @@
 #endif
 #ifdef IMAGE_BL32
 const mmap_region_t plat_arm_mmap[] = {
-#ifdef AARCH32
+#ifndef __aarch64__
 	ARM_MAP_SHARED_RAM,
 	ARM_V2M_MAP_MEM_PROTECT,
 #endif
diff --git a/plat/arm/board/fvp/include/platform_def.h b/plat/arm/board/fvp/include/platform_def.h
index 207cd31..4f26277 100644
--- a/plat/arm/board/fvp/include/platform_def.h
+++ b/plat/arm/board/fvp/include/platform_def.h
@@ -120,7 +120,7 @@
 #define PLAT_ARM_MAX_BL31_SIZE		UL(0x3B000)
 #endif
 
-#ifdef AARCH32
+#ifndef __aarch64__
 /*
  * Since BL32 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL32_SIZE is
  * calculated using the current SP_MIN PROGBITS debug size plus the sizes of
@@ -259,7 +259,7 @@
 /*
  * Physical and virtual address space limits for MMU in AARCH64 & AARCH32 modes
  */
-#ifdef AARCH64
+#ifdef __aarch64__
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
 #else
diff --git a/plat/arm/board/fvp_ve/include/platform_def.h b/plat/arm/board/fvp_ve/include/platform_def.h
index b3b3672..4e575e1 100644
--- a/plat/arm/board/fvp_ve/include/platform_def.h
+++ b/plat/arm/board/fvp_ve/include/platform_def.h
@@ -331,7 +331,7 @@
 /*
  * Physical and virtual address space limits for MMU in AARCH64 & AARCH32 modes
  */
-#ifdef AARCH64
+#ifdef __aarch64__
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
 #else
diff --git a/plat/arm/board/juno/include/platform_def.h b/plat/arm/board/juno/include/platform_def.h
index d693c26..83aeeb4 100644
--- a/plat/arm/board/juno/include/platform_def.h
+++ b/plat/arm/board/juno/include/platform_def.h
@@ -291,7 +291,7 @@
 /*
  * Physical and virtual address space limits for MMU in AARCH64 & AARCH32 modes
  */
-#ifdef AARCH64
+#ifdef __aarch64__
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
 #else
diff --git a/plat/arm/board/juno/juno_common.c b/plat/arm/board/juno/juno_common.c
index 118c19a..98c5d3c 100644
--- a/plat/arm/board/juno/juno_common.c
+++ b/plat/arm/board/juno/juno_common.c
@@ -37,7 +37,7 @@
 	CSS_MAP_DEVICE,
 	SOC_CSS_MAP_DEVICE,
 	ARM_MAP_NS_DRAM1,
-#ifdef AARCH64
+#ifdef __aarch64__
 	ARM_MAP_DRAM2,
 #endif
 #ifdef SPD_tspd
@@ -74,7 +74,7 @@
 #endif
 #ifdef IMAGE_BL32
 const mmap_region_t plat_arm_mmap[] = {
-#ifdef AARCH32
+#ifndef __aarch64__
 	ARM_MAP_SHARED_RAM,
 #ifdef PLAT_ARM_MEM_PROT_ADDR
 	ARM_V2M_MAP_MEM_PROTECT,
diff --git a/plat/arm/board/n1sdp/include/platform_def.h b/plat/arm/board/n1sdp/include/platform_def.h
index ff583a9..7348bf5 100644
--- a/plat/arm/board/n1sdp/include/platform_def.h
+++ b/plat/arm/board/n1sdp/include/platform_def.h
@@ -34,7 +34,7 @@
  * space the physical & virtual address space limits are extended to
  * 40-bits.
  */
-#ifndef AARCH32
+#ifdef __aarch64__
 #define PLAT_PHY_ADDR_SPACE_SIZE		(1ULL << 40)
 #define PLAT_VIRT_ADDR_SPACE_SIZE		(1ULL << 40)
 #else
diff --git a/plat/arm/board/rde1edge/include/platform_def.h b/plat/arm/board/rde1edge/include/platform_def.h
index c62cda8..50b04f0 100644
--- a/plat/arm/board/rde1edge/include/platform_def.h
+++ b/plat/arm/board/rde1edge/include/platform_def.h
@@ -29,7 +29,7 @@
 /*
  * Physical and virtual address space limits for MMU in AARCH64 & AARCH32 modes
  */
-#ifndef AARCH32
+#ifdef __aarch64__
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
 #else
diff --git a/plat/arm/board/rdn1edge/include/platform_def.h b/plat/arm/board/rdn1edge/include/platform_def.h
index 2c7b8bd..580ab8e 100644
--- a/plat/arm/board/rdn1edge/include/platform_def.h
+++ b/plat/arm/board/rdn1edge/include/platform_def.h
@@ -30,7 +30,7 @@
 /*
  * Physical and virtual address space limits for MMU in AARCH64 & AARCH32 modes
  */
-#ifndef AARCH32
+#ifdef __aarch64__
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
 #else
diff --git a/plat/arm/board/sgi575/include/platform_def.h b/plat/arm/board/sgi575/include/platform_def.h
index 883403b..f00146f 100644
--- a/plat/arm/board/sgi575/include/platform_def.h
+++ b/plat/arm/board/sgi575/include/platform_def.h
@@ -30,7 +30,7 @@
 /*
  * Physical and virtual address space limits for MMU in AARCH64 & AARCH32 modes
  */
-#ifndef AARCH32
+#ifdef __aarch64__
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
 #else
diff --git a/plat/arm/board/sgm775/include/platform_def.h b/plat/arm/board/sgm775/include/platform_def.h
index 3e1fdd1..27d1b33 100644
--- a/plat/arm/board/sgm775/include/platform_def.h
+++ b/plat/arm/board/sgm775/include/platform_def.h
@@ -15,7 +15,7 @@
 /*
  * Physical and virtual address space limits for MMU in AARCH64 & AARCH32 modes
  */
-#ifndef AARCH32
+#ifdef __aarch64__
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
 #else
diff --git a/plat/arm/common/arm_bl1_setup.c b/plat/arm/common/arm_bl1_setup.c
index 8905bb0..b19a7c3 100644
--- a/plat/arm/common/arm_bl1_setup.c
+++ b/plat/arm/common/arm_bl1_setup.c
@@ -121,11 +121,11 @@
 	};
 
 	setup_page_tables(bl_regions, plat_arm_get_mmap());
-#ifdef AARCH32
-	enable_mmu_svc_mon(0);
-#else
+#ifdef __aarch64__
 	enable_mmu_el3(0);
-#endif /* AARCH32 */
+#else
+	enable_mmu_svc_mon(0);
+#endif /* __aarch64__ */
 
 	arm_setup_romlib();
 }
diff --git a/plat/arm/common/arm_bl2_el3_setup.c b/plat/arm/common/arm_bl2_el3_setup.c
index 0c01c87..97b5a88 100644
--- a/plat/arm/common/arm_bl2_el3_setup.c
+++ b/plat/arm/common/arm_bl2_el3_setup.c
@@ -83,10 +83,10 @@
 
 	setup_page_tables(bl_regions, plat_arm_get_mmap());
 
-#ifdef AARCH32
-	enable_mmu_svc_mon(0);
-#else
+#ifdef __aarch64__
 	enable_mmu_el3(0);
+#else
+	enable_mmu_svc_mon(0);
 #endif
 }
 
diff --git a/plat/arm/common/arm_bl2_setup.c b/plat/arm/common/arm_bl2_setup.c
index 32617f6..cdf87ca 100644
--- a/plat/arm/common/arm_bl2_setup.c
+++ b/plat/arm/common/arm_bl2_setup.c
@@ -128,10 +128,10 @@
 
 	setup_page_tables(bl_regions, plat_arm_get_mmap());
 
-#ifdef AARCH32
-	enable_mmu_svc_mon(0);
-#else
+#ifdef __aarch64__
 	enable_mmu_el1(0);
+#else
+	enable_mmu_svc_mon(0);
 #endif
 
 	arm_setup_romlib();
@@ -153,7 +153,7 @@
 	assert(bl_mem_params);
 
 	switch (image_id) {
-#ifdef AARCH64
+#ifdef __aarch64__
 	case BL32_IMAGE_ID:
 #ifdef SPD_opteed
 		pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
diff --git a/plat/arm/common/arm_bl2u_setup.c b/plat/arm/common/arm_bl2u_setup.c
index 9f44b9e..3614c7d 100644
--- a/plat/arm/common/arm_bl2u_setup.c
+++ b/plat/arm/common/arm_bl2u_setup.c
@@ -83,10 +83,10 @@
 
 	setup_page_tables(bl_regions, plat_arm_get_mmap());
 
-#ifdef AARCH32
-	enable_mmu_svc_mon(0);
-#else
+#ifdef __aarch64__
 	enable_mmu_el1(0);
+#else
+	enable_mmu_svc_mon(0);
 #endif
 	arm_setup_romlib();
 }
diff --git a/plat/arm/common/arm_common.c b/plat/arm/common/arm_common.c
index f5ce4d2..bc0cf9a 100644
--- a/plat/arm/common/arm_common.c
+++ b/plat/arm/common/arm_common.c
@@ -59,7 +59,7 @@
 /*******************************************************************************
  * Gets SPSR for BL33 entry
  ******************************************************************************/
-#ifndef AARCH32
+#ifdef __aarch64__
 uint32_t arm_get_spsr_for_bl33_entry(void)
 {
 	unsigned int mode;
@@ -97,7 +97,7 @@
 			SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
 	return spsr;
 }
-#endif /* AARCH32 */
+#endif /* __aarch64__ */
 
 /*******************************************************************************
  * Configures access to the system counter timer module.
diff --git a/plat/arm/common/arm_gicv3.c b/plat/arm/common/arm_gicv3.c
index 93bebf3..7f4957f 100644
--- a/plat/arm/common/arm_gicv3.c
+++ b/plat/arm/common/arm_gicv3.c
@@ -83,8 +83,8 @@
 	 * can use GIC system registers to manage interrupts and does
 	 * not need GIC interface base addresses to be configured.
 	 */
-#if (defined(AARCH32) && defined(IMAGE_BL32)) || \
-	(defined(IMAGE_BL31) && !defined(AARCH32))
+#if (!defined(__aarch64__) && defined(IMAGE_BL32)) || \
+	(defined(__aarch64__) && defined(IMAGE_BL31))
 	gicv3_driver_init(&arm_gic_data);
 #endif
 }
diff --git a/plat/arm/common/arm_nor_psci_mem_protect.c b/plat/arm/common/arm_nor_psci_mem_protect.c
index 3a70059..b9181eb 100644
--- a/plat/arm/common/arm_nor_psci_mem_protect.c
+++ b/plat/arm/common/arm_nor_psci_mem_protect.c
@@ -26,7 +26,7 @@
 
 static mem_region_t arm_ram_ranges[] = {
 	{DRAM1_NS_IMAGE_LIMIT, DRAM1_PROTECTED_SIZE},
-#ifdef AARCH64
+#ifdef __aarch64__
 	{ARM_DRAM2_BASE, 1u << ONE_GB_SHIFT},
 #endif
 };
diff --git a/plat/arm/common/arm_pm.c b/plat/arm/common/arm_pm.c
index cb87baf..c95f452 100644
--- a/plat/arm/common/arm_pm.c
+++ b/plat/arm/common/arm_pm.c
@@ -116,7 +116,7 @@
 			(ARM_NS_DRAM1_BASE + ARM_NS_DRAM1_SIZE))) {
 		return 0;
 	}
-#ifndef AARCH32
+#ifdef __aarch64__
 	if ((entrypoint >= ARM_DRAM2_BASE) && (entrypoint <
 			(ARM_DRAM2_BASE + ARM_DRAM2_SIZE))) {
 		return 0;
diff --git a/plat/arm/common/execution_state_switch.c b/plat/arm/common/execution_state_switch.c
index d471130..00ac16e 100644
--- a/plat/arm/common/execution_state_switch.c
+++ b/plat/arm/common/execution_state_switch.c
@@ -40,7 +40,7 @@
 		void *handle)
 {
 	/* Execution state can be switched only if EL3 is AArch64 */
-#ifdef AARCH64
+#ifdef __aarch64__
 	bool caller_64, thumb = false, from_el2;
 	unsigned int el, endianness;
 	u_register_t spsr, pc, scr, sctlr;
@@ -173,7 +173,7 @@
 	SMC_RET1(handle, STATE_SW_E_PARAM);
 
 exec_denied:
-#endif
+#endif /* __aarch64__ */
 	/* State switch denied */
 	SMC_RET1(handle, STATE_SW_E_DENIED);
 }
diff --git a/plat/common/plat_gicv3.c b/plat/common/plat_gicv3.c
index f5ed6fc..4a8a7ee 100644
--- a/plat/common/plat_gicv3.c
+++ b/plat/common/plat_gicv3.c
@@ -300,7 +300,7 @@
 #pragma weak plat_ic_end_of_interrupt
 
 /* In AArch32, the secure group1 interrupts are targeted to Secure PL1 */
-#ifdef AARCH32
+#ifndef __aarch64__
 #define IS_IN_EL1()	IS_IN_SECURE()
 #endif
 
diff --git a/plat/common/plat_psci_common.c b/plat/common/plat_psci_common.c
index 1a29d9c..16bec79 100644
--- a/plat/common/plat_psci_common.c
+++ b/plat/common/plat_psci_common.c
@@ -20,10 +20,10 @@
 #define MHZ_TICKS_PER_SEC 1000000U
 
 /* Maximum time-stamp value read from architectural counters */
-#ifdef AARCH32
-#define MAX_TS	UINT32_MAX
-#else
+#ifdef __aarch64__
 #define MAX_TS	UINT64_MAX
+#else
+#define MAX_TS	UINT32_MAX
 #endif
 
 /* Following are used as ID's to capture time-stamp */
diff --git a/plat/hisilicon/hikey/hikey_bl2_setup.c b/plat/hisilicon/hikey/hikey_bl2_setup.c
index c57fea9..2f96efc 100644
--- a/plat/hisilicon/hikey/hikey_bl2_setup.c
+++ b/plat/hisilicon/hikey/hikey_bl2_setup.c
@@ -77,7 +77,7 @@
 /*******************************************************************************
  * Gets SPSR for BL33 entry
  ******************************************************************************/
-#ifndef AARCH32
+#ifdef __aarch64__
 uint32_t hikey_get_spsr_for_bl33_entry(void)
 {
 	unsigned int mode;
@@ -112,7 +112,7 @@
 			SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
 	return spsr;
 }
-#endif /* AARCH32 */
+#endif /* __aarch64__ */
 
 int hikey_bl2_handle_post_image_load(unsigned int image_id)
 {
@@ -125,7 +125,7 @@
 	assert(bl_mem_params);
 
 	switch (image_id) {
-#ifdef AARCH64
+#ifdef __aarch64__
 	case BL32_IMAGE_ID:
 #ifdef SPD_opteed
 		pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
diff --git a/plat/hisilicon/hikey/include/hikey_layout.h b/plat/hisilicon/hikey/include/hikey_layout.h
index a87648e..4b8dc53 100644
--- a/plat/hisilicon/hikey/include/hikey_layout.h
+++ b/plat/hisilicon/hikey/include/hikey_layout.h
@@ -113,7 +113,7 @@
 #endif
 
 /* BL32 is mandatory in AArch32 */
-#ifndef AARCH32
+#ifdef __aarch64__
 #ifdef SPD_none
 #undef BL32_BASE
 #endif /* SPD_none */
diff --git a/plat/hisilicon/hikey960/hikey960_bl2_setup.c b/plat/hisilicon/hikey960/hikey960_bl2_setup.c
index 7102de8..fc9ddab 100644
--- a/plat/hisilicon/hikey960/hikey960_bl2_setup.c
+++ b/plat/hisilicon/hikey960/hikey960_bl2_setup.c
@@ -168,7 +168,7 @@
 /*******************************************************************************
  * Gets SPSR for BL33 entry
  ******************************************************************************/
-#ifndef AARCH32
+#ifdef __aarch64__
 uint32_t hikey960_get_spsr_for_bl33_entry(void)
 {
 	unsigned int mode;
@@ -203,7 +203,7 @@
 			SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
 	return spsr;
 }
-#endif /* AARCH32 */
+#endif /* __aarch64__ */
 
 int hikey960_bl2_handle_post_image_load(unsigned int image_id)
 {
@@ -216,7 +216,7 @@
 	assert(bl_mem_params);
 
 	switch (image_id) {
-#ifdef AARCH64
+#ifdef __aarch64__
 	case BL32_IMAGE_ID:
 #ifdef SPD_opteed
 		pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
diff --git a/plat/hisilicon/hikey960/include/platform_def.h b/plat/hisilicon/hikey960/include/platform_def.h
index 7c3c102..f6edad6 100644
--- a/plat/hisilicon/hikey960/include/platform_def.h
+++ b/plat/hisilicon/hikey960/include/platform_def.h
@@ -95,7 +95,7 @@
 #endif
 
 /* BL32 is mandatory in AArch32 */
-#ifndef AARCH32
+#ifdef __aarch64__
 #ifdef SPD_none
 #undef BL32_BASE
 #endif /* SPD_none */
diff --git a/plat/hisilicon/poplar/bl2_plat_setup.c b/plat/hisilicon/poplar/bl2_plat_setup.c
index 11403b0..cc9d975 100644
--- a/plat/hisilicon/poplar/bl2_plat_setup.c
+++ b/plat/hisilicon/poplar/bl2_plat_setup.c
@@ -54,7 +54,7 @@
 /*******************************************************************************
  * Gets SPSR for BL33 entry
  ******************************************************************************/
-#ifndef AARCH32
+#ifdef __aarch64__
 uint32_t poplar_get_spsr_for_bl33_entry(void)
 {
 	unsigned long el_status;
@@ -93,7 +93,7 @@
 			SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
 	return spsr;
 }
-#endif /* AARCH32 */
+#endif /* __aarch64__ */
 
 int poplar_bl2_handle_post_image_load(unsigned int image_id)
 {
@@ -107,7 +107,7 @@
 	assert(bl_mem_params);
 
 	switch (image_id) {
-#ifdef AARCH64
+#ifdef __aarch64__
 	case BL32_IMAGE_ID:
 #ifdef SPD_opteed
 		pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
diff --git a/plat/hisilicon/poplar/include/platform_def.h b/plat/hisilicon/poplar/include/platform_def.h
index 8f7a155..9783f8d 100644
--- a/plat/hisilicon/poplar/include/platform_def.h
+++ b/plat/hisilicon/poplar/include/platform_def.h
@@ -107,7 +107,7 @@
 #endif
 
 /* BL32 is mandatory in AArch32 */
-#ifndef AARCH32
+#ifdef __aarch64__
 #ifdef SPD_none
 #undef BL32_BASE
 #endif /* SPD_none */
diff --git a/plat/layerscape/common/ls_bl1_setup.c b/plat/layerscape/common/ls_bl1_setup.c
index 163b35c..fff065e 100644
--- a/plat/layerscape/common/ls_bl1_setup.c
+++ b/plat/layerscape/common/ls_bl1_setup.c
@@ -59,11 +59,11 @@
 #endif
 			     );
 	VERBOSE("After setup the page tables\n");
-#ifdef AARCH32
-	enable_mmu_svc_mon(0);
-#else
+#ifdef __aarch64__
 	enable_mmu_el3(0);
-#endif /* AARCH32 */
+#else
+	enable_mmu_svc_mon(0);
+#endif /* __aarch64__ */
 	VERBOSE("After MMU enabled\n");
 }
 
diff --git a/plat/layerscape/common/ls_bl2_setup.c b/plat/layerscape/common/ls_bl2_setup.c
index 192eaec..35f42e1 100644
--- a/plat/layerscape/common/ls_bl2_setup.c
+++ b/plat/layerscape/common/ls_bl2_setup.c
@@ -54,10 +54,10 @@
 #endif
 			      );
 
-#ifdef AARCH32
-	enable_mmu_svc_mon(0);
-#else
+#ifdef __aarch64__
 	enable_mmu_el1(0);
+#else
+	enable_mmu_svc_mon(0);
 #endif
 }
 
@@ -74,7 +74,7 @@
 	assert(bl_mem_params);
 
 	switch (image_id) {
-#ifdef AARCH64
+#ifdef __aarch64__
 	case BL32_IMAGE_ID:
 		bl_mem_params->ep_info.spsr = ls_get_spsr_for_bl32_entry();
 		break;
diff --git a/plat/layerscape/common/ls_common.c b/plat/layerscape/common/ls_common.c
index 3b42909..23c0d00 100644
--- a/plat/layerscape/common/ls_common.c
+++ b/plat/layerscape/common/ls_common.c
@@ -143,7 +143,7 @@
 /*******************************************************************************
  * Gets SPSR for BL33 entry
  ******************************************************************************/
-#ifndef AARCH32
+#ifdef __aarch64__
 uint32_t ls_get_spsr_for_bl33_entry(void)
 {
 	unsigned int mode;
@@ -181,7 +181,7 @@
 			SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
 	return spsr;
 }
-#endif /* AARCH32 */
+#endif /* __aarch64__ */
 
 /*******************************************************************************
  * Returns Layerscape platform specific memory map regions.
diff --git a/plat/qemu/qemu_bl1_setup.c b/plat/qemu/qemu_bl1_setup.c
index b582151..67f3327 100644
--- a/plat/qemu/qemu_bl1_setup.c
+++ b/plat/qemu/qemu_bl1_setup.c
@@ -41,10 +41,10 @@
  * does basic initialization. Later architectural setup (bl1_arch_setup())
  * does not do anything platform specific.
  *****************************************************************************/
-#ifdef AARCH32
-#define QEMU_CONFIGURE_BL1_MMU(...)	qemu_configure_mmu_svc_mon(__VA_ARGS__)
-#else
+#ifdef __aarch64__
 #define QEMU_CONFIGURE_BL1_MMU(...)	qemu_configure_mmu_el3(__VA_ARGS__)
+#else
+#define QEMU_CONFIGURE_BL1_MMU(...)	qemu_configure_mmu_svc_mon(__VA_ARGS__)
 #endif
 
 void bl1_plat_arch_setup(void)
diff --git a/plat/qemu/qemu_bl2_mem_params_desc.c b/plat/qemu/qemu_bl2_mem_params_desc.c
index ba6a4db..a01f2dc 100644
--- a/plat/qemu/qemu_bl2_mem_params_desc.c
+++ b/plat/qemu/qemu_bl2_mem_params_desc.c
@@ -35,7 +35,7 @@
 	  .next_handoff_image_id = INVALID_IMAGE_ID,
 	},
 #else /* EL3_PAYLOAD_BASE */
-#ifdef AARCH64
+#ifdef __aarch64__
 	/* Fill BL31 related information */
 	{ .image_id = BL31_IMAGE_ID,
 
@@ -59,10 +59,10 @@
 	  .next_handoff_image_id = BL33_IMAGE_ID,
 # endif
 	},
-#endif /* AARCH64 */
+#endif /* __aarch64__ */
 # ifdef QEMU_LOAD_BL32
 
-#ifdef AARCH64
+#ifdef __aarch64__
 #define BL32_EP_ATTRIBS		(SECURE | EXECUTABLE)
 #define BL32_IMG_ATTRIBS	0
 #else
diff --git a/plat/qemu/qemu_bl2_setup.c b/plat/qemu/qemu_bl2_setup.c
index b8ca895..4c97c8d 100644
--- a/plat/qemu/qemu_bl2_setup.c
+++ b/plat/qemu/qemu_bl2_setup.c
@@ -81,10 +81,10 @@
 	/* TODO Initialize timer */
 }
 
-#ifdef AARCH32
-#define QEMU_CONFIGURE_BL2_MMU(...)	qemu_configure_mmu_svc_mon(__VA_ARGS__)
-#else
+#ifdef __aarch64__
 #define QEMU_CONFIGURE_BL2_MMU(...)	qemu_configure_mmu_el1(__VA_ARGS__)
+#else
+#define QEMU_CONFIGURE_BL2_MMU(...)	qemu_configure_mmu_svc_mon(__VA_ARGS__)
 #endif
 
 void bl2_plat_arch_setup(void)
@@ -101,7 +101,7 @@
  ******************************************************************************/
 static uint32_t qemu_get_spsr_for_bl32_entry(void)
 {
-#ifdef AARCH64
+#ifdef __aarch64__
 	/*
 	 * The Secure Payload Dispatcher service is responsible for
 	 * setting the SPSR prior to entry into the BL3-2 image.
@@ -119,7 +119,7 @@
 static uint32_t qemu_get_spsr_for_bl33_entry(void)
 {
 	uint32_t spsr;
-#ifdef AARCH64
+#ifdef __aarch64__
 	unsigned int mode;
 
 	/* Figure out what mode we enter the non-secure world in */
diff --git a/plat/qemu/qemu_common.c b/plat/qemu/qemu_common.c
index aee8321..56bf953 100644
--- a/plat/qemu/qemu_common.c
+++ b/plat/qemu/qemu_common.c
@@ -132,11 +132,11 @@
 	}
 
 /* Define EL1 and EL3 variants of the function initialising the MMU */
-#ifdef AARCH32
-DEFINE_CONFIGURE_MMU_EL(svc_mon)
-#else
+#ifdef __aarch64__
 DEFINE_CONFIGURE_MMU_EL(el1)
 DEFINE_CONFIGURE_MMU_EL(el3)
+#else
+DEFINE_CONFIGURE_MMU_EL(svc_mon)
 #endif
 
 
diff --git a/plat/rockchip/common/include/plat_private.h b/plat/rockchip/common/include/plat_private.h
index 9041bdb..714a8bf 100644
--- a/plat/rockchip/common/include/plat_private.h
+++ b/plat/rockchip/common/include/plat_private.h
@@ -60,16 +60,7 @@
 /******************************************************************************
  * Function and variable prototypes
  *****************************************************************************/
-#ifdef AARCH32
-void plat_configure_mmu_svc_mon(unsigned long total_base,
-				unsigned long total_size,
-				unsigned long,
-				unsigned long,
-				unsigned long,
-				unsigned long);
-
-void rockchip_plat_mmu_svc_mon(void);
-#else
+#ifdef __aarch64__
 void plat_configure_mmu_el3(unsigned long total_base,
 			    unsigned long total_size,
 			    unsigned long,
@@ -78,6 +69,15 @@
 			    unsigned long);
 
 void rockchip_plat_mmu_el3(void);
+#else
+void plat_configure_mmu_svc_mon(unsigned long total_base,
+				unsigned long total_size,
+				unsigned long,
+				unsigned long,
+				unsigned long,
+				unsigned long);
+
+void rockchip_plat_mmu_svc_mon(void);
 #endif
 
 void plat_cci_init(void);
diff --git a/services/std_svc/sdei/sdei_private.h b/services/std_svc/sdei/sdei_private.h
index 8cc66e7..44a7301 100644
--- a/services/std_svc/sdei/sdei_private.h
+++ b/services/std_svc/sdei/sdei_private.h
@@ -22,7 +22,7 @@
 #include <services/sdei.h>
 #include <setjmp.h>
 
-#ifdef AARCH32
+#ifndef __aarch64__
 # error SDEI is implemented only for AArch64 systems
 #endif