blob: 2171550b3c6a09cf3050dd541ae702338a288a43 [file] [log] [blame]
/*
* Copyright (c) 2017-2019, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef BSEC_H
#define BSEC_H
#include <stdbool.h>
#include <stdint.h>
#include <lib/utils_def.h>
/*
* IP configuration
*/
#define BSEC_OTP_MASK GENMASK(4, 0)
#define BSEC_OTP_BANK_SHIFT 5
#define BSEC_TIMEOUT_VALUE 0xFFFF
#define ADDR_LOWER_OTP_PERLOCK_SHIFT 0x03
#define DATA_LOWER_OTP_PERLOCK_BIT 0x03U /* 2 significants bits are used */
#define DATA_LOWER_OTP_PERLOCK_MASK GENMASK(2, 0)
#define ADDR_UPPER_OTP_PERLOCK_SHIFT 0x04
#define DATA_UPPER_OTP_PERLOCK_BIT 0x01U /* 1 significants bits are used */
#define DATA_UPPER_OTP_PERLOCK_MASK GENMASK(3, 0)
/*
* Return status
*/
#define BSEC_OK 0U
#define BSEC_ERROR 0xFFFFFFFFU
#define BSEC_DISTURBED 0xFFFFFFFEU
#define BSEC_INVALID_PARAM 0xFFFFFFFCU
#define BSEC_PROG_FAIL 0xFFFFFFFBU
#define BSEC_LOCK_FAIL 0xFFFFFFFAU
#define BSEC_WRITE_FAIL 0xFFFFFFF9U
#define BSEC_SHADOW_FAIL 0xFFFFFFF8U
#define BSEC_TIMEOUT 0xFFFFFFF7U
/*
* BSEC REGISTER OFFSET (base relative)
*/
#define BSEC_OTP_CONF_OFF 0x000U
#define BSEC_OTP_CTRL_OFF 0x004U
#define BSEC_OTP_WRDATA_OFF 0x008U
#define BSEC_OTP_STATUS_OFF 0x00CU
#define BSEC_OTP_LOCK_OFF 0x010U
#define BSEC_DEN_OFF 0x014U
#define BSEC_DISTURBED_OFF 0x01CU
#define BSEC_DISTURBED1_OFF 0x020U
#define BSEC_DISTURBED2_OFF 0x024U
#define BSEC_ERROR_OFF 0x034U
#define BSEC_ERROR1_OFF 0x038U
#define BSEC_ERROR2_OFF 0x03CU
#define BSEC_WRLOCK_OFF 0x04CU /* Safmem permanent lock */
#define BSEC_WRLOCK1_OFF 0x050U
#define BSEC_WRLOCK2_OFF 0x054U
#define BSEC_SPLOCK_OFF 0x064U /* Program safmem sticky lock */
#define BSEC_SPLOCK1_OFF 0x068U
#define BSEC_SPLOCK2_OFF 0x06CU
#define BSEC_SWLOCK_OFF 0x07CU /* Write in OTP sticky lock */
#define BSEC_SWLOCK1_OFF 0x080U
#define BSEC_SWLOCK2_OFF 0x084U
#define BSEC_SRLOCK_OFF 0x094U /* Shadowing sticky lock */
#define BSEC_SRLOCK1_OFF 0x098U
#define BSEC_SRLOCK2_OFF 0x09CU
#define BSEC_JTAG_IN_OFF 0x0ACU
#define BSEC_JTAG_OUT_OFF 0x0B0U
#define BSEC_SCRATCH_OFF 0x0B4U
#define BSEC_OTP_DATA_OFF 0x200U
#define BSEC_IPHW_CFG_OFF 0xFF0U
#define BSEC_IPVR_OFF 0xFF4U
#define BSEC_IP_ID_OFF 0xFF8U
#define BSEC_IP_MAGIC_ID_OFF 0xFFCU
/*
* BSEC_CONFIGURATION Register
*/
#define BSEC_CONF_POWER_UP_MASK BIT(0)
#define BSEC_CONF_POWER_UP_SHIFT 0
#define BSEC_CONF_FRQ_MASK GENMASK(2, 1)
#define BSEC_CONF_FRQ_SHIFT 1
#define BSEC_CONF_PRG_WIDTH_MASK GENMASK(6, 3)
#define BSEC_CONF_PRG_WIDTH_SHIFT 3
#define BSEC_CONF_TREAD_MASK GENMASK(8, 7)
#define BSEC_CONF_TREAD_SHIFT 7
/*
* BSEC_CONTROL Register
*/
#define BSEC_READ 0x000U
#define BSEC_WRITE 0x100U
#define BSEC_LOCK 0x200U
/*
* BSEC_OTP_LOCK register
*/
#define UPPER_OTP_LOCK_MASK BIT(0)
#define UPPER_OTP_LOCK_SHIFT 0
#define DENREG_LOCK_MASK BIT(2)
#define DENREG_LOCK_SHIFT 2
#define GPLOCK_LOCK_MASK BIT(4)
#define GPLOCK_LOCK_SHIFT 4
/*
* BSEC_OTP_STATUS Register
*/
#define BSEC_MODE_STATUS_MASK GENMASK(2, 0)
#define BSEC_MODE_BUSY_MASK BIT(3)
#define BSEC_MODE_PROGFAIL_MASK BIT(4)
#define BSEC_MODE_PWR_MASK BIT(5)
#define BSEC_MODE_BIST1_LOCK_MASK BIT(6)
#define BSEC_MODE_BIST2_LOCK_MASK BIT(7)
/* OTP MODE*/
#define BSEC_MODE_OPEN1 0x00
#define BSEC_MODE_SECURED 0x01
#define BSEC_MODE_OPEN2 0x02
#define BSEC_MODE_INVALID 0x04
/* BSEC_DENABLE Register */
#define BSEC_HDPEN BIT(4)
#define BSEC_SPIDEN BIT(5)
#define BSEC_SPINDEN BIT(6)
#define BSEC_DBGSWGEN BIT(10)
#define BSEC_DEN_ALL_MSK GENMASK(10, 0)
/* BSEC_FENABLE Register */
#define BSEC_FEN_ALL_MSK GENMASK(14, 0)
/*
* OTP Lock services definition
* Value must corresponding to the bit number in the register
*/
#define BSEC_LOCK_UPPER_OTP 0x00
#define BSEC_LOCK_DEBUG 0x02
#define BSEC_LOCK_PROGRAM 0x03
/* Values for struct bsec_config::freq */
#define FREQ_10_20_MHZ 0x0
#define FREQ_20_30_MHZ 0x1
#define FREQ_30_45_MHZ 0x2
#define FREQ_45_67_MHZ 0x3
/*
* Device info structure, providing device-specific functions and a means of
* adding driver-specific state
*/
struct bsec_config {
uint8_t tread; /* SAFMEM Reading current level default 0 */
uint8_t pulse_width; /* SAFMEM Programming pulse width default 1 */
uint8_t freq; /* SAFMEM CLOCK see freq value define
* default FREQ_45_67_MHZ
*/
uint8_t power; /* Power up SAFMEM. 1 power up, 0 power off */
uint8_t prog_lock; /* Programming Sticky lock
* 1 programming is locked until next reset
*/
uint8_t den_lock; /* Debug enable sticky lock
* 1 debug enable is locked until next reset
*/
uint8_t upper_otp_lock; /* Shadowing of upper OTP sticky lock
* 1 shadowing of upper OTP is locked
* until next reset
*/
};
uint32_t bsec_probe(void);
uint32_t bsec_get_base(void);
uint32_t bsec_set_config(struct bsec_config *cfg);
uint32_t bsec_get_config(struct bsec_config *cfg);
uint32_t bsec_shadow_register(uint32_t otp);
uint32_t bsec_read_otp(uint32_t *val, uint32_t otp);
uint32_t bsec_write_otp(uint32_t val, uint32_t otp);
uint32_t bsec_program_otp(uint32_t val, uint32_t otp);
uint32_t bsec_permanent_lock_otp(uint32_t otp);
uint32_t bsec_write_debug_conf(uint32_t val);
uint32_t bsec_read_debug_conf(void);
uint32_t bsec_write_feature_conf(uint32_t val);
uint32_t bsec_read_feature_conf(uint32_t *val);
uint32_t bsec_get_status(void);
uint32_t bsec_get_hw_conf(void);
uint32_t bsec_get_version(void);
uint32_t bsec_get_id(void);
uint32_t bsec_get_magic_id(void);
bool bsec_write_sr_lock(uint32_t otp, uint32_t value);
bool bsec_read_sr_lock(uint32_t otp);
bool bsec_write_sw_lock(uint32_t otp, uint32_t value);
bool bsec_read_sw_lock(uint32_t otp);
bool bsec_write_sp_lock(uint32_t otp, uint32_t value);
bool bsec_read_sp_lock(uint32_t otp);
bool bsec_wr_lock(uint32_t otp);
uint32_t bsec_otp_lock(uint32_t service, uint32_t value);
bool bsec_mode_is_closed_device(void);
uint32_t bsec_shadow_read_otp(uint32_t *otp_value, uint32_t word);
uint32_t bsec_check_nsec_access_rights(uint32_t otp);
#endif /* BSEC_H */