diff --git a/bl1/aarch64/bl1_arch_setup.c b/bl1/aarch64/bl1_arch_setup.c
index 624bd80..0a1cb30 100644
--- a/bl1/aarch64/bl1_arch_setup.c
+++ b/bl1/aarch64/bl1_arch_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -23,7 +23,7 @@
  ******************************************************************************/
 void bl1_arch_next_el_setup(void)
 {
-	unsigned long next_sctlr;
+	u_register_t next_sctlr;
 
 	/* Use the same endianness than the current BL */
 	next_sctlr = (read_sctlr_el3() & SCTLR_EE_BIT);
diff --git a/bl1/bl1_fwu.c b/bl1/bl1_fwu.c
index d222b9c..48f08d2 100644
--- a/bl1/bl1_fwu.c
+++ b/bl1/bl1_fwu.c
@@ -483,7 +483,7 @@
 	 * Flush image_info to memory so that other
 	 * secure world images can see changes.
 	 */
-	flush_dcache_range((unsigned long)&image_desc->image_info,
+	flush_dcache_range((uintptr_t)&image_desc->image_info,
 		sizeof(image_info_t));
 
 	INFO("BL1-FWU: Authentication was successful\n");
diff --git a/bl1/bl1_main.c b/bl1/bl1_main.c
index df01dba..2bb8511 100644
--- a/bl1/bl1_main.c
+++ b/bl1/bl1_main.c
@@ -49,7 +49,7 @@
 	bl2_mem_layout->total_base = bl1_mem_layout->total_base;
 	bl2_mem_layout->total_size = BL1_RW_BASE - bl1_mem_layout->total_base;
 
-	flush_dcache_range((unsigned long)bl2_mem_layout, sizeof(meminfo_t));
+	flush_dcache_range((uintptr_t)bl2_mem_layout, sizeof(meminfo_t));
 }
 
 /*******************************************************************************
diff --git a/bl32/sp_min/aarch32/entrypoint.S b/bl32/sp_min/aarch32/entrypoint.S
index 2ffef6a..0a68475 100644
--- a/bl32/sp_min/aarch32/entrypoint.S
+++ b/bl32/sp_min/aarch32/entrypoint.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -183,15 +183,6 @@
 	stcopr	r0, SCR
 	isb
 
-	/*
-	 * Set PMCR.DP to 1 to prohibit cycle counting whilst in Secure Mode.
-	 * Also, the PMCR.LC field has an architecturally UNKNOWN value on reset
-	 * and so set to 1 as ARM has deprecated use of PMCR.LC=0.
-	 */
-	ldcopr	r0, PMCR
-	orr	r0, r0, #(PMCR_LC_BIT | PMCR_DP_BIT)
-	stcopr	r0, PMCR
-
 	ldr	r0, [r2, #SMC_CTX_GPREG_R0]	/* smc_fid */
 	/* Check whether an SMC64 is issued */
 	tst	r0, #(FUNCID_CC_MASK << FUNCID_CC_SHIFT)
@@ -236,15 +227,6 @@
 	stcopr	r0, SCR
 	isb
 
-	/*
-	 * Set PMCR.DP to 1 to prohibit cycle counting whilst in Secure Mode.
-	 * Also, the PMCR.LC field has an architecturally UNKNOWN value on reset
-	 * and so set to 1 as ARM has deprecated use of PMCR.LC=0.
-	 */
-	ldcopr	r0, PMCR
-	orr	r0, r0, #(PMCR_LC_BIT | PMCR_DP_BIT)
-	stcopr	r0, PMCR
-
 	push	{r2, r3}
 	bl	sp_min_fiq
 	pop	{r0, r3}
diff --git a/common/fdt_fixup.c b/common/fdt_fixup.c
new file mode 100644
index 0000000..99d0eee
--- /dev/null
+++ b/common/fdt_fixup.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * Contains generic routines to fix up the device tree blob passed on to
+ * payloads like BL32 and BL33 (and further down the boot chain).
+ * This allows to easily add PSCI nodes, when the original DT does not have
+ * it or advertises another method.
+ * Also it supports to add reserved memory nodes to describe memory that
+ * is used by the secure world, so that non-secure software avoids using
+ * that.
+ */
+
+#include <string.h>
+
+#include <libfdt.h>
+
+#include <common/debug.h>
+#include <drivers/console.h>
+#include <lib/psci/psci.h>
+
+#include <common/fdt_fixup.h>
+
+static int append_psci_compatible(void *fdt, int offs, const char *str)
+{
+	return fdt_appendprop(fdt, offs, "compatible", str, strlen(str) + 1);
+}
+
+/*
+ * Those defines are for PSCI v0.1 legacy clients, which we expect to use
+ * the same execution state (AArch32/AArch64) as TF-A.
+ * Kernels running in AArch32 on an AArch64 TF-A should use PSCI v0.2.
+ */
+#ifdef __aarch64__
+#define PSCI_CPU_SUSPEND_FNID	PSCI_CPU_SUSPEND_AARCH64
+#define PSCI_CPU_ON_FNID	PSCI_CPU_ON_AARCH64
+#else
+#define PSCI_CPU_SUSPEND_FNID	PSCI_CPU_SUSPEND_AARCH32
+#define PSCI_CPU_ON_FNID	PSCI_CPU_ON_AARCH32
+#endif
+
+/*******************************************************************************
+ * dt_add_psci_node() - Add a PSCI node into an existing device tree
+ * @fdt:	pointer to the device tree blob in memory
+ *
+ * Add a device tree node describing PSCI into the root level of an existing
+ * device tree blob in memory.
+ * This will add v0.1, v0.2 and v1.0 compatible strings and the standard
+ * function IDs for v0.1 compatibility.
+ * An existing PSCI node will not be touched, the function will return success
+ * in this case. This function will not touch the /cpus enable methods, use
+ * dt_add_psci_cpu_enable_methods() for that.
+ *
+ * Return: 0 on success, -1 otherwise.
+ ******************************************************************************/
+int dt_add_psci_node(void *fdt)
+{
+	int offs;
+
+	if (fdt_path_offset(fdt, "/psci") >= 0) {
+		WARN("PSCI Device Tree node already exists!\n");
+		return 0;
+	}
+
+	offs = fdt_path_offset(fdt, "/");
+	if (offs < 0)
+		return -1;
+	offs = fdt_add_subnode(fdt, offs, "psci");
+	if (offs < 0)
+		return -1;
+	if (append_psci_compatible(fdt, offs, "arm,psci-1.0"))
+		return -1;
+	if (append_psci_compatible(fdt, offs, "arm,psci-0.2"))
+		return -1;
+	if (append_psci_compatible(fdt, offs, "arm,psci"))
+		return -1;
+	if (fdt_setprop_string(fdt, offs, "method", "smc"))
+		return -1;
+	if (fdt_setprop_u32(fdt, offs, "cpu_suspend", PSCI_CPU_SUSPEND_FNID))
+		return -1;
+	if (fdt_setprop_u32(fdt, offs, "cpu_off", PSCI_CPU_OFF))
+		return -1;
+	if (fdt_setprop_u32(fdt, offs, "cpu_on", PSCI_CPU_ON_FNID))
+		return -1;
+	return 0;
+}
+
+/*
+ * Find the first subnode that has a "device_type" property with the value
+ * "cpu" and which's enable-method is not "psci" (yet).
+ * Returns 0 if no such subnode is found, so all have already been patched
+ * or none have to be patched in the first place.
+ * Returns 1 if *one* such subnode has been found and successfully changed
+ * to "psci".
+ * Returns -1 on error.
+ *
+ * Call in a loop until it returns 0. Recalculate the node offset after
+ * it has returned 1.
+ */
+static int dt_update_one_cpu_node(void *fdt, int offset)
+{
+	int offs;
+
+	/* Iterate over all subnodes to find those with device_type = "cpu". */
+	for (offs = fdt_first_subnode(fdt, offset); offs >= 0;
+	     offs = fdt_next_subnode(fdt, offs)) {
+		const char *prop;
+		int len;
+
+		prop = fdt_getprop(fdt, offs, "device_type", &len);
+		if (!prop)
+			continue;
+		if (memcmp(prop, "cpu", 4) != 0 || len != 4)
+			continue;
+
+		/* Ignore any nodes which already use "psci". */
+		prop = fdt_getprop(fdt, offs, "enable-method", &len);
+		if (prop && memcmp(prop, "psci", 5) == 0 && len == 5)
+			continue;
+
+		if (fdt_setprop_string(fdt, offs, "enable-method", "psci"))
+			return -1;
+		/*
+		 * Subnode found and patched.
+		 * Restart to accommodate potentially changed offsets.
+		 */
+		return 1;
+	}
+
+	if (offs == -FDT_ERR_NOTFOUND)
+		return 0;
+
+	return offs;
+}
+
+/*******************************************************************************
+ * dt_add_psci_cpu_enable_methods() - switch CPU nodes in DT to use PSCI
+ * @fdt:	pointer to the device tree blob in memory
+ *
+ * Iterate over all CPU device tree nodes (/cpus/cpu@x) in memory to change
+ * the enable-method to PSCI. This will add the enable-method properties, if
+ * required, or will change existing properties to read "psci".
+ *
+ * Return: 0 on success, or a negative error value otherwise.
+ ******************************************************************************/
+
+int dt_add_psci_cpu_enable_methods(void *fdt)
+{
+	int offs, ret;
+
+	do {
+		offs = fdt_path_offset(fdt, "/cpus");
+		if (offs < 0)
+			return offs;
+
+		ret = dt_update_one_cpu_node(fdt, offs);
+	} while (ret > 0);
+
+	return ret;
+}
+
+#define HIGH_BITS(x) ((sizeof(x) > 4) ? ((x) >> 32) : (typeof(x))0)
+
+/*******************************************************************************
+ * fdt_add_reserved_memory() - reserve (secure) memory regions in DT
+ * @dtb:	pointer to the device tree blob in memory
+ * @node_name:	name of the subnode to be used
+ * @base:	physical base address of the reserved region
+ * @size:	size of the reserved region
+ *
+ * Add a region of memory to the /reserved-memory node in a device tree in
+ * memory, creating that node if required. Each region goes into a subnode
+ * of that node and has a @node_name, a @base address and a @size.
+ * This will prevent any device tree consumer from using that memory. It
+ * can be used to announce secure memory regions, as it adds the "no-map"
+ * property to prevent mapping and speculative operations on that region.
+ *
+ * See reserved-memory/reserved-memory.txt in the (Linux kernel) DT binding
+ * documentation for details.
+ *
+ * Return: 0 on success, a negative error value otherwise.
+ ******************************************************************************/
+int fdt_add_reserved_memory(void *dtb, const char *node_name,
+			    uintptr_t base, size_t size)
+{
+	int offs = fdt_path_offset(dtb, "/reserved-memory");
+	uint32_t addresses[3];
+
+	if (offs < 0) {			/* create if not existing yet */
+		offs = fdt_add_subnode(dtb, 0, "reserved-memory");
+		if (offs < 0)
+			return offs;
+		fdt_setprop_u32(dtb, offs, "#address-cells", 2);
+		fdt_setprop_u32(dtb, offs, "#size-cells", 1);
+		fdt_setprop(dtb, offs, "ranges", NULL, 0);
+	}
+
+	addresses[0] = cpu_to_fdt32(HIGH_BITS(base));
+	addresses[1] = cpu_to_fdt32(base & 0xffffffff);
+	addresses[2] = cpu_to_fdt32(size & 0xffffffff);
+	offs = fdt_add_subnode(dtb, offs, node_name);
+	fdt_setprop(dtb, offs, "no-map", NULL, 0);
+	fdt_setprop(dtb, offs, "reg", addresses, 12);
+
+	return 0;
+}
diff --git a/docs/getting_started/porting-guide.rst b/docs/getting_started/porting-guide.rst
index 5786dd3..9eb7c17 100644
--- a/docs/getting_started/porting-guide.rst
+++ b/docs/getting_started/porting-guide.rst
@@ -546,6 +546,13 @@
    PLAT_PARTITION_MAX_ENTRIES := 12
    $(eval $(call add_define,PLAT_PARTITION_MAX_ENTRIES))
 
+-  **PLAT_PARTITION_BLOCK_SIZE**
+   The size of partition block. It could be either 512 bytes or 4096 bytes.
+   The default value is 512.
+   `For example, define the build flag in platform.mk`_:
+   PLAT_PARTITION_BLOCK_SIZE := 4096
+   $(eval $(call add_define,PLAT_PARTITION_BLOCK_SIZE))
+
 The following constant is optional. It should be defined to override the default
 behaviour of the ``assert()`` function (for example, to save memory).
 
@@ -2202,6 +2209,19 @@
 above the CPU might require initialization due to having previously been in
 low power states. The generic code expects the handler to succeed.
 
+plat_psci_ops.pwr_domain_on_finish_late() [optional]
+...........................................................
+
+This optional function is called by the PSCI implementation after the calling
+CPU is fully powered on with respective data caches enabled. The calling CPU and
+the associated cluster are guaranteed to be participating in coherency. This
+function gives the flexibility to perform any platform-specific actions safely,
+such as initialization or modification of shared data structures, without the
+overhead of explicit cache maintainace operations.
+
+The ``target_state`` has a similar meaning as described in the ``pwr_domain_on_finish()``
+operation. The generic code expects the handler to succeed.
+
 plat_psci_ops.pwr_domain_suspend_finish()
 .........................................
 
diff --git a/docs/maintainers.rst b/docs/maintainers.rst
index 7731c72..d997baa 100644
--- a/docs/maintainers.rst
+++ b/docs/maintainers.rst
@@ -48,6 +48,14 @@
 :F: drivers/amlogic/gxl
 :F: plat/amlogic/gxl/
 
+Amlogic Meson S905X2 (G12A) platform port
+---------------------------------------
+:M: Carlo Caione <ccaione@baylibre.com>
+:G: `carlo.caione`_
+:F: docs/plat/meson-g12a.rst
+:F: drivers/amlogic/g12a
+:F: plat/amlogic/g12a/
+
 Armv7-A architecture port
 -------------------------
 :M: Etienne Carriere <etienne.carriere@linaro.org>
diff --git a/docs/plat/hikey.rst b/docs/plat/hikey.rst
index 74ff2f4..372d388 100644
--- a/docs/plat/hikey.rst
+++ b/docs/plat/hikey.rst
@@ -1,15 +1,15 @@
-Description
-===========
+HiKey
+=====
 
 HiKey is one of 96boards. Hisilicon Kirin6220 processor is installed on HiKey.
 
 More information are listed in `link`_.
 
 How to build
-============
+------------
 
 Code Locations
---------------
+~~~~~~~~~~~~~~
 
 -  Trusted Firmware-A:
    `link <https://github.com/ARM-software/arm-trusted-firmware>`__
@@ -33,7 +33,7 @@
    `link <https://github.com/96boards-hikey/atf-fastboot/tree/master>`__
 
 Build Procedure
----------------
+~~~~~~~~~~~~~~~
 
 -  Fetch all the above repositories into local host.
    Make all the repositories in the same ${BUILD\_PATH}.
diff --git a/docs/plat/hikey960.rst b/docs/plat/hikey960.rst
index 7ddb0b1..3d42a77 100644
--- a/docs/plat/hikey960.rst
+++ b/docs/plat/hikey960.rst
@@ -1,15 +1,15 @@
-Description
-===========
+HiKey960
+========
 
 HiKey960 is one of 96boards. Hisilicon Hi3660 processor is installed on HiKey960.
 
 More information are listed in `link`_.
 
 How to build
-============
+------------
 
 Code Locations
---------------
+~~~~~~~~~~~~~~
 
 -  Trusted Firmware-A:
    `link <https://github.com/ARM-software/arm-trusted-firmware>`__
@@ -30,7 +30,7 @@
    `link <https://git.linaro.org/uefi/uefi-tools.git>`__
 
 Build Procedure
----------------
+~~~~~~~~~~~~~~~
 
 -  Fetch all the above 5 repositories into local host.
    Make all the repositories in the same ${BUILD\_PATH}.
diff --git a/docs/plat/index.rst b/docs/plat/index.rst
index 5951413..2695d4e 100644
--- a/docs/plat/index.rst
+++ b/docs/plat/index.rst
@@ -7,23 +7,28 @@
    :numbered:
 
    allwinner
-   fvp_ve
-   imx8
-   imx8m
-   intel-stratix10
-   ls1043a
    meson-gxbb
    meson-gxl
+   fvp_ve
+   hikey
+   hikey960
+   intel-agilex
+   intel-stratix10
+   marvell/index
    mt8183
    nvidia-tegra
+   warp7
+   imx8
+   imx8m
+   ls1043a
+   poplar
    qemu
+   rpi3
    rcar-gen3
    rockchip
-   rpi3
    socionext-uniphier
-   stm32mp1
    synquacer
+   stm32mp1
    ti-k3
-   warp7
    xilinx-versal
    xilinx-zynqmp
diff --git a/docs/plat/intel-agilex.rst b/docs/plat/intel-agilex.rst
index 015a195..ff27b6b 100644
--- a/docs/plat/intel-agilex.rst
+++ b/docs/plat/intel-agilex.rst
@@ -67,6 +67,7 @@
 ----------
 
 ::
+
         INFO:    DDR: DRAM calibration success.
         INFO:    ECC is disabled.
         NOTICE:  BL2: v2.1(debug)
diff --git a/docs/plat/intel-stratix10.rst b/docs/plat/intel-stratix10.rst
index 77a45a4..7f8d18e 100644
--- a/docs/plat/intel-stratix10.rst
+++ b/docs/plat/intel-stratix10.rst
@@ -67,6 +67,7 @@
 ----------
 
 ::
+
          INFO:    DDR: DRAM calibration success.
          INFO:    ECC is disabled.
          INFO:    Init HPS NOC's DDR Scheduler.
diff --git a/docs/plat/marvell/build.rst b/docs/plat/marvell/build.rst
new file mode 100644
index 0000000..c8923e4
--- /dev/null
+++ b/docs/plat/marvell/build.rst
@@ -0,0 +1,254 @@
+TF-A Build Instructions for Marvell Platforms
+=============================================
+
+This section describes how to compile the Trusted Firmware-A (TF-A) project for Marvell's platforms.
+
+Build Instructions
+------------------
+(1) Set the cross compiler
+
+    .. code:: shell
+
+        > export CROSS_COMPILE=/path/to/toolchain/aarch64-linux-gnu-
+
+(2) Set path for FIP images:
+
+Set U-Boot image path (relatively to TF-A root or absolute path)
+
+    .. code:: shell
+
+        > export BL33=path/to/u-boot.bin
+
+For example: if U-Boot project (and its images) is located at ``~/project/u-boot``,
+BL33 should be ``~/project/u-boot/u-boot.bin``
+
+    .. note::
+
+       *u-boot.bin* should be used and not *u-boot-spl.bin*
+
+Set MSS/SCP image path (mandatory only for Armada80x0)
+
+    .. code:: shell
+
+        > export SCP_BL2=path/to/mrvl_scp_bl2*.img
+
+(3) Armada-37x0 build requires WTP tools installation.
+
+See below in the section "Tools and external components installation".
+Install ARM 32-bit cross compiler, which is required for building WTMI image for CM3
+
+    .. code:: shell
+
+        > sudo apt-get install gcc-arm-linux-gnueabi
+
+(4) Clean previous build residuals (if any)
+
+    .. code:: shell
+
+        > make distclean
+
+(5) Build TF-A
+
+There are several build options:
+
+- DEBUG
+
+        Default is without debug information (=0). in order to enable it use ``DEBUG=1``.
+        Must be disabled when building UART recovery images due to current console driver
+        implementation that is not compatible with Xmodem protocol used for boot image download.
+
+- LOG_LEVEL
+
+        Defines the level of logging which will be purged to the default output port.
+
+        LOG_LEVEL_NONE		0
+        LOG_LEVEL_ERROR		10
+        LOG_LEVEL_NOTICE	20
+        LOG_LEVEL_WARNING	30
+        LOG_LEVEL_INFO		40
+        LOG_LEVEL_VERBOSE	50
+
+- USE_COHERENT_MEM
+
+        This flag determines whether to include the coherent memory region in the
+        BL memory map or not.
+
+- LLC_ENABLE
+
+        Flag defining the LLC (L3) cache state. The cache is enabled by default (``LLC_ENABLE=1``).
+
+- MARVELL_SECURE_BOOT
+
+        Build trusted(=1)/non trusted(=0) image, default is non trusted.
+
+- BLE_PATH
+
+        Points to BLE (Binary ROM extension) sources folder. Only required for A8K builds.
+        The parameter is optional, its default value is ``plat/marvell/a8k/common/ble``.
+
+- MV_DDR_PATH
+
+        For A7/8K, use this parameter to point to mv_ddr driver sources to allow BLE build. For A37x0,
+        it is used for ddr_tool build.
+
+        Usage example: MV_DDR_PATH=path/to/mv_ddr
+
+        The parameter is optional for A7/8K, when this parameter is not set, the mv_ddr
+        sources are expected to be located at: drivers/marvell/mv_ddr. However, the parameter
+        is necessary for A37x0.
+
+        For the mv_ddr source location, check the section "Tools and external components installation"
+
+- DDR_TOPOLOGY
+
+        For Armada37x0 only, the DDR topology map index/name, default is 0.
+
+        Supported Options:
+            - DDR3 1CS (0): DB-88F3720-DDR3-Modular (512MB); EspressoBIN (512MB)
+            - DDR4 1CS (1): DB-88F3720-DDR4-Modular (512MB)
+            - DDR3 2CS (2): EspressoBIN V3-V5 (1GB)
+            - DDR4 2CS (3): DB-88F3720-DDR4-Modular (4GB)
+            - DDR3 1CS (4): DB-88F3720-DDR3-Modular (1GB)
+            - DDR4 1CS (5): EspressoBin V7 (1GB)
+            - DDR4 2CS (6): EspressoBin V7 (2GB)
+            - CUSTOMER (CUST): Customer board, DDR3 1CS 512MB
+
+- CLOCKSPRESET
+
+        For Armada37x0 only, the clock tree configuration preset including CPU and DDR frequency,
+        default is CPU_800_DDR_800.
+
+            - CPU_600_DDR_600	-	CPU at 600 MHz, DDR at 600 MHz
+            - CPU_800_DDR_800	-	CPU at 800 MHz, DDR at 800 MHz
+            - CPU_1000_DDR_800	-	CPU at 1000 MHz, DDR at 800 MHz
+            - CPU_1200_DDR_750	-	CPU at 1200 MHz, DDR at 750 MHz
+
+- BOOTDEV
+
+        For Armada37x0 only, the flash boot device, default is ``SPINOR``.
+
+        Currently, Armada37x0 only supports ``SPINOR``, ``SPINAND``, ``EMMCNORM`` and ``SATA``:
+
+            - SPINOR - SPI NOR flash boot
+            - SPINAND - SPI NAND flash boot
+            - EMMCNORM - eMMC Download Mode
+
+                Download boot loader or program code from eMMC flash into CM3 or CA53
+                Requires full initialization and command sequence
+
+            - SATA - SATA device boot
+
+- PARTNUM
+
+        For Armada37x0 only, the boot partition number, default is 0.
+
+        To boot from eMMC, the value should be aligned with the parameter in
+        U-Boot with name of ``CONFIG_SYS_MMC_ENV_PART``, whose value by default is
+        1. For details about CONFIG_SYS_MMC_ENV_PART, please refer to the U-Boot
+        build instructions.
+
+- WTMI_IMG
+
+        For Armada37x0 only, the path of the WTMI image can point to an image which
+        does nothing, an image which supports EFUSE or a customized CM3 firmware
+        binary. The default image is wtmi.bin that built from sources in WTP
+        folder, which is the next option. If the default image is OK, then this
+        option should be skipped.
+
+- WTP
+
+    For Armada37x0 only, use this parameter to point to wtptools source code
+    directory, which can be found as a3700_utils.zip in the release. Usage
+    example: ``WTP=/path/to/a3700_utils``
+
+    For example, in order to build the image in debug mode with log level up to 'notice' level run
+
+    .. code:: shell
+
+        > make DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 PLAT=<MARVELL_PLATFORM> all fip
+
+    And if we want to build a Armada37x0 image in debug mode with log level up to 'notice' level,
+    the image has the preset CPU at 1000 MHz, preset DDR3 at 800 MHz, the DDR topology of DDR4 2CS,
+    the image boot from SPI NOR flash partition 0, and the image is non trusted in WTP, the command
+    line is as following
+
+    .. code:: shell
+
+        > make DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 CLOCKSPRESET=CPU_1000_DDR_800 \
+            MARVELL_SECURE_BOOT=0 DDR_TOPOLOGY=3 BOOTDEV=SPINOR PARTNUM=0 PLAT=a3700 all fip
+
+    Supported MARVELL_PLATFORM are:
+        - a3700 (for both A3720 DB and EspressoBin)
+        - a70x0
+        - a70x0_amc (for AMC board)
+        - a80x0
+        - a80x0_mcbin (for MacciatoBin)
+
+Special Build Flags
+--------------------
+
+- PLAT_RECOVERY_IMAGE_ENABLE
+    When set this option to enable secondary recovery function when build atf.
+    In order to build UART recovery image this operation should be disabled for
+    a70x0 and a80x0 because of hardware limitation (boot from secondary image
+    can interrupt UART recovery process). This MACRO definition is set in
+    ``plat/marvell/a8k/common/include/platform_def.h`` file.
+
+For more information about build options, please refer to section
+'Summary of build options' in the :ref:`User Guide`.
+
+
+Build output
+------------
+Marvell's TF-A compilation generates 7 files:
+
+    - ble.bin		- BLe image
+    - bl1.bin		- BL1 image
+    - bl2.bin		- BL2 image
+    - bl31.bin		- BL31 image
+    - fip.bin		- FIP image (contains BL2, BL31 & BL33 (U-Boot) images)
+    - boot-image.bin	- TF-A image (contains BL1 and FIP images)
+    - flash-image.bin	- Image which contains boot-image.bin and SPL image.
+      Should be placed on the boot flash/device.
+
+
+Tools and external components installation
+------------------------------------------
+
+Armada37x0 Builds require installation of 3 components
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+(1) ARM cross compiler capable of building images for the service CPU (CM3).
+    This component is usually included in the Linux host packages.
+    On Debian/Ubuntu hosts the default GNU ARM tool chain can be installed
+    using the following command
+
+    .. code:: shell
+
+        > sudo apt-get install gcc-arm-linux-gnueabi
+
+    Only if required, the default tool chain prefix ``arm-linux-gnueabi-`` can be
+    overwritten using the environment variable ``CROSS_CM3``.
+    Example for BASH shell
+
+    .. code:: shell
+
+        > export CROSS_CM3=/opt/arm-cross/bin/arm-linux-gnueabi
+
+(2) DDR initialization library sources (mv_ddr) available at the following repository
+    (use the "mv_ddr-armada-atf-mainline" branch):
+
+    https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
+
+(3) Armada3700 tools available at the following repository (use the latest release branch):
+
+    https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell.git
+
+Armada70x0 and Armada80x0 Builds require installation of an additional component
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+(1) DDR initialization library sources (mv_ddr) available at the following repository
+    (use the "mv_ddr-armada-atf-mainline" branch):
+
+    https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
+
diff --git a/docs/plat/marvell/build.txt b/docs/plat/marvell/build.txt
deleted file mode 100644
index 7b75196..0000000
--- a/docs/plat/marvell/build.txt
+++ /dev/null
@@ -1,194 +0,0 @@
-TF-A Build Instructions
-======================
-
-This section describes how to compile the ARM Trusted Firmware (TF-A) project for Marvell's platforms.
-
-Build Instructions
-------------------
-(1) Set the cross compiler::
-
-		> export CROSS_COMPILE=/path/to/toolchain/aarch64-linux-gnu-
-
-(2) Set path for FIP images:
-
-	Set U-Boot image path (relatively to TF-A root or absolute path)::
-
-		> export BL33=path/to/u-boot.bin
-
-	For example: if U-Boot project (and its images) is located at ~/project/u-boot,
-	BL33 should be ~/project/u-boot/u-boot.bin
-
-	.. note::
-
-	   u-boot.bin should be used and not u-boot-spl.bin
-
-	Set MSS/SCP image path (mandatory only for Armada80x0)::
-
-		> export SCP_BL2=path/to/mrvl_scp_bl2*.img
-
-(3) Armada-37x0 build requires WTP tools installation.
-
-	See below in the section "Tools and external components installation".
-	Install ARM 32-bit cross compiler, which is required for building WTMI image for CM3::
-
-		> sudo apt-get install gcc-arm-linux-gnueabi
-
-(4) Clean previous build residuals (if any)::
-
-		> make distclean
-
-(5) Build TF-A:
-
-	There are several build options:
-
-	- DEBUG: default is without debug information (=0). in order to enable it use DEBUG=1
-		Must be disabled when building UART recovery images due to current console driver
-		implementation that is not compatible with Xmodem protocol used for boot image download.
-
-	- LOG_LEVEL: defines the level of logging which will be purged to the default output port.
-
-		LOG_LEVEL_NONE		0
-		LOG_LEVEL_ERROR		10
-		LOG_LEVEL_NOTICE	20
-		LOG_LEVEL_WARNING	30
-		LOG_LEVEL_INFO		40
-		LOG_LEVEL_VERBOSE	50
-
-	- USE_COHERENT_MEM: This flag determines whether to include the coherent memory region in the
-		BL memory map or not.
-
-	- LLC_ENABLE: Flag defining the LLC (L3) cache state. The cache is enabled by default (LLC_ENABLE=1).
-
-	- MARVELL_SECURE_BOOT: build trusted(=1)/non trusted(=0) image, default is non trusted.
-
-	- BLE_PATH:
-		Points to BLE (Binary ROM extension) sources folder. Only required for A8K builds.
-		The parameter is optional, its default value is "plat/marvell/a8k/common/ble".
-
-	- MV_DDR_PATH:
-		For A7/8K, use this parameter to point to mv_ddr driver sources to allow BLE build. For A37x0,
-		it is used for ddr_tool build.
-		Usage example: MV_DDR_PATH=path/to/mv_ddr
-		The parameter is optional for A7/8K, when this parameter is not set, the mv_ddr
-		sources are expected to be located at: drivers/marvell/mv_ddr. However, the parameter
-		is necessary for A37x0.
-		For the mv_ddr source location, check the section "Tools and external components installation"
-
-	- DDR_TOPOLOGY: For Armada37x0 only, the DDR topology map index/name, default is 0.
-		Supported Options:
-			- DDR3 1CS (0): DB-88F3720-DDR3-Modular (512MB); EspressoBIN (512MB)
-			- DDR4 1CS (1): DB-88F3720-DDR4-Modular (512MB)
-			- DDR3 2CS (2): EspressoBIN V3-V5 (1GB)
-			- DDR4 2CS (3): DB-88F3720-DDR4-Modular (4GB)
-			- DDR3 1CS (4): DB-88F3720-DDR3-Modular (1GB)
-			- DDR4 1CS (5): EspressoBin V7 (1GB)
-			- DDR4 2CS (6): EspressoBin V7 (2GB)
-			- CUSTOMER (CUST): Customer board, DDR3 1CS 512MB
-
-	- CLOCKSPRESET: For Armada37x0 only, the clock tree configuration preset including CPU and DDR frequency,
-		default is CPU_800_DDR_800.
-			- CPU_600_DDR_600	-	CPU at 600 MHz, DDR at 600 MHz
-			- CPU_800_DDR_800	-	CPU at 800 MHz, DDR at 800 MHz
-			- CPU_1000_DDR_800	-	CPU at 1000 MHz, DDR at 800 MHz
-			- CPU_1200_DDR_750	-	CPU at 1200 MHz, DDR at 750 MHz
-
-	- BOOTDEV: For Armada37x0 only, the flash boot device, default is SPINOR,
-		Currently, Armada37x0 only supports SPINOR, SPINAND, EMMCNORM and SATA:
-
-			- SPINOR - SPI NOR flash boot
-			- SPINAND - SPI NAND flash boot
-			- EMMCNORM - eMMC Download Mode
-				Download boot loader or program code from eMMC flash into CM3 or CA53
-				Requires full initialization and command sequence
-			- SATA - SATA device boot
-
-	- PARTNUM: For Armada37x0 only, the boot partition number, default is 0. To boot from eMMC, the value
-		should be aligned with the parameter in U-Boot with name of CONFIG_SYS_MMC_ENV_PART, whose
-		value by default is 1.
-		For details about CONFIG_SYS_MMC_ENV_PART, please refer to the U-Boot build instructions.
-
-	- WTMI_IMG: For Armada37x0 only, the path of the WTMI image can point to an image which does
-		nothing, an image which supports EFUSE or a customized CM3 firmware binary. The default image
-		is wtmi.bin that built from sources in WTP folder, which is the next option. If the default
-		image is OK, then this option should be skipped.
-
-	- WTP: For Armada37x0 only, use this parameter to point to wtptools source code directory, which
-		can be found as a3700_utils.zip in the release.
-		Usage example: WTP=/path/to/a3700_utils
-
-	For example, in order to build the image in debug mode with log level up to 'notice' level run::
-
-		> make DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 PLAT=<MARVELL_PLATFORM> all fip
-
-	And if we want to build a Armada37x0 image in debug mode with log level up to 'notice' level,
-	the image has the preset CPU at 1000 MHz, preset DDR3 at 800 MHz, the DDR topology of DDR4 2CS,
-	the image boot from SPI NOR flash partition 0, and the image is non trusted in WTP, the command
-	line is as following::
-
-		> make DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 CLOCKSPRESET=CPU_1000_DDR_800 \
-			MARVELL_SECURE_BOOT=0 DDR_TOPOLOGY=3 BOOTDEV=SPINOR PARTNUM=0 PLAT=a3700 all fip
-
-	Supported MARVELL_PLATFORM are:
-		- a3700 (for both A3720 DB and EspressoBin)
-		- a70x0
-		- a70x0_amc (for AMC board)
-		- a80x0
-		- a80x0_mcbin (for MacciatoBin)
-
-Special Build Flags
---------------------
-	- PLAT_RECOVERY_IMAGE_ENABLE: When set this option to enable secondary recovery function when build
-		atf. In order to build UART recovery image this operation should be disabled for a70x0 and a80x0
-		because of hardware limitation (boot from secondary image can interrupt UART recovery process).
-		This MACRO definition is set in plat/marvell/a8k/common/include/platform_def.h file
-
-(for more information about build options, please refer to section 'Summary of build options' in  TF-A user-guide:
- https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/user-guide.md)
-
-
-Build output
--------------
-Marvell's TF-A compilation generates 7 files:
-	- ble.bin		- BLe image
-	- bl1.bin		- BL1 image
-	- bl2.bin		- BL2 image
-	- bl31.bin		- BL31 image
-	- fip.bin		- FIP image (contains BL2, BL31 & BL33 (U-Boot) images)
-	- boot-image.bin	- TF-A image (contains BL1 and FIP images)
-	- flash-image.bin	- Image which contains boot-image.bin and SPL image;
-				  should be placed on the boot flash/device.
-
-
-Tools and external components installation
-==========================================
-
-Armada37x0 Builds require installation of 3 components
--------------------------------------------------------
-
-(1) ARM cross compiler capable of building images for the service CPU (CM3).
-    This component is usually included in the Linux host packages.
-    On Debian/Ubuntu hosts the default GNU ARM tool chain can be installed
-    using the following command::
-
-		> sudo apt-get install gcc-arm-linux-gnueabi
-
-    Only if required, the default tool chain prefix "arm-linux-gnueabi-" can be
-    overwritten using the environment variable CROSS_CM3.
-    Example for BASH shell::
-
-		> export CROSS_CM3=/opt/arm-cross/bin/arm-linux-gnueabi
-
-(2) DDR initialization library sources (mv_ddr) available at the following repository
-    (use the "mv_ddr-armada-atf-mainline" branch)::
-    https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
-
-(3) Armada3700 tools available at the following repository (use the latest release branch)::
-    https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell.git
-
-Armada70x0 and Armada80x0 Builds require installation of an additional component
---------------------------------------------------------------------------------
-
-(1) DDR initialization library sources (mv_ddr) available at the following repository
-    (use the "mv_ddr-armada-atf-mainline" branch)::
-    https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
-
diff --git a/docs/plat/marvell/index.rst b/docs/plat/marvell/index.rst
new file mode 100644
index 0000000..89ebdc0
--- /dev/null
+++ b/docs/plat/marvell/index.rst
@@ -0,0 +1,14 @@
+Marvell
+=======
+
+.. toctree::
+   :maxdepth: 1
+   :caption: Contents
+
+   build
+   porting
+   misc/mvebu-a8k-addr-map
+   misc/mvebu-amb
+   misc/mvebu-ccu
+   misc/mvebu-io-win
+   misc/mvebu-iob
diff --git a/docs/plat/marvell/misc/mvebu-a8k-addr-map.rst b/docs/plat/marvell/misc/mvebu-a8k-addr-map.rst
new file mode 100644
index 0000000..e88a458
--- /dev/null
+++ b/docs/plat/marvell/misc/mvebu-a8k-addr-map.rst
@@ -0,0 +1,49 @@
+Address decoding flow and address translation units of Marvell Armada 8K SoC family
+===================================================================================
+
+::
+
+  +--------------------------------------------------------------------------------------------------+
+  |                                                              +-------------+    +--------------+ |
+  |                                                              | Memory      +-----   DRAM CS    | |
+  |+------------+ +-----------+ +-----------+                    | Controller  |    +--------------+ |
+  ||  AP DMA    | |           | |           |                    +-------------+                     |
+  ||  SD/eMMC   | | CA72 CPUs | |  AP MSS   |                    +-------------+                     |
+  ||  MCI-0/1   | |           | |           |                    | Memory      |                     |
+  |+------+-----+ +--+--------+ +--------+--+  +------------+    | Controller  |     +-------------+ |
+  |       |          |                   |     |            +----- Translaton  |     |AP           | |
+  |       |          |                   |     |            |    +-------------+     |Configuration| |
+  |       |          |                   +-----+            +-------------------------Space        | |
+  |       |          | +-------------+         |  CCU       |                        +-------------+ |
+  |       |          | | MMU         +---------+  Windows   |   +-----------+        +-------------+ |
+  |       |          +-| translation |         |  Lookup    +----           +---------   AP SPI    | |
+  |       |            +-------------+         |            |   |           |        +-------------+ |
+  |       |            +-------------+         |            |   |  IO       |        +-------------+ |
+  |       +------------| SMMU        +---------+            |   |  Windows  +---------  AP MCI0/1  | |
+  |                    | translation |         +------------+   |  Lookup   |        +-------------+ |
+  |                    +---------+---+                          |           |        +-------------+ |
+  |             -                |                              |           +---------   AP STM    | |
+  |             +-----------------                              |           |        +-------------+ |
+  | AP          |                |                              +-+---------+                        |
+  +---------------------------------------------------------------|----------------------------------+
+  +-------------|-------------------------------------------------|----------------------------------+
+  | CP          |            +-------------+               +------+-----+      +-------------------+ |
+  |             |            |             |               |            +-------   SB CFG Space    | |
+  |             |            |   DIOB      |               |            |      +-------------------+ |
+  |             |            |   Windows   -----------------  IOB       |      +-------------------+ |
+  |             |            |   Control   |               |  Windows   +------| SB PCIe-0 - PCIe2 | |
+  |             |            |             |               |  Lookup    |      +-------------------+ |
+  |             |            +------+------+               |            |      +-------------------+ |
+  |             |                   |                      |            +------+      SB NAND      | |
+  |             |                   |                      +------+-----+      +-------------------+ |
+  |             |                   |                             |                                  |
+  |             |                   |                             |                                  |
+  |   +------------------+   +------------+                +------+-----+      +-------------------+ |
+  |   | Network Engine   |   |            |                |            +-------  SB SPI-0/SPI-1   | |
+  |   | Security Engine  |   | PCIe, MSS  |                |  RUNIT     |      +-------------------+ |
+  |   | SATA, USB        |   | DMA        |                |  Windows   |      +-------------------+ |
+  |   | SD/eMMC          |   |            |                |  Lookup    +-------   SB Device Bus   | |
+  |   | TDM, I2C         |   |            |                |            |      +-------------------+ |
+  |   +------------------+   +------------+                +------------+                            |
+  |                                                                                                  |
+  +--------------------------------------------------------------------------------------------------+
diff --git a/docs/plat/marvell/misc/mvebu-a8k-addr-map.txt b/docs/plat/marvell/misc/mvebu-a8k-addr-map.txt
deleted file mode 100644
index 586e8b7..0000000
--- a/docs/plat/marvell/misc/mvebu-a8k-addr-map.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Address decoding flow and address translation units of Marvell Armada 8K SoC family
-
-+--------------------------------------------------------------------------------------------------+
-|                                                              +-------------+    +--------------+ |
-|                                                              | Memory      +-----   DRAM CS    | |
-|+------------+ +-----------+ +-----------+                    | Controller  |    +--------------+ |
-||  AP DMA    | |           | |           |                    +-------------+                     |
-||  SD/eMMC   | | CA72 CPUs | |  AP MSS   |                    +-------------+                     |
-||  MCI-0/1   | |           | |           |                    | Memory      |                     |
-|+------+-----+ +--+--------+ +--------+--+  +------------+    | Controller  |     +-------------+ |
-|       |          |                   |     |            +----- Translaton  |     |AP           | |
-|       |          |                   |     |            |    +-------------+     |Configuration| |
-|       |          |                   +-----+            +-------------------------Space        | |
-|       |          | +-------------+         |  CCU       |                        +-------------+ |
-|       |          | | MMU         +---------+  Windows   |   +-----------+        +-------------+ |
-|       |          +-| translation |         |  Lookup    +----           +---------   AP SPI    | |
-|       |            +-------------+         |            |   |           |        +-------------+ |
-|       |            +-------------+         |            |   |  IO       |        +-------------+ |
-|       +------------| SMMU        +---------+            |   |  Windows  +---------  AP MCI0/1  | |
-|                    | translation |         +------------+   |  Lookup   |        +-------------+ |
-|                    +---------+---+                          |           |        +-------------+ |
-|             -                |                              |           +---------   AP STM    | |
-|             +-----------------                              |           |        +-------------+ |
-| AP          |                |                              +-+---------+                        |
-+---------------------------------------------------------------|----------------------------------+
-+-------------|-------------------------------------------------|----------------------------------+
-| CP          |            +-------------+               +------+-----+      +-------------------+ |
-|             |            |             |               |            +-------   SB CFG Space    | |
-|             |            |   DIOB      |               |            |      +-------------------+ |
-|             |            |   Windows   -----------------  IOB       |      +-------------------+ |
-|             |            |   Control   |               |  Windows   +------| SB PCIe-0 - PCIe2 | |
-|             |            |             |               |  Lookup    |      +-------------------+ |
-|             |            +------+------+               |            |      +-------------------+ |
-|             |                   |                      |            +------+      SB NAND      | |
-|             |                   |                      +------+-----+      +-------------------+ |
-|             |                   |                             |                                  |
-|             |                   |                             |                                  |
-|   +------------------+   +------------+                +------+-----+      +-------------------+ |
-|   | Network Engine   |   |            |                |            +-------  SB SPI-0/SPI-1   | |
-|   | Security Engine  |   | PCIe, MSS  |                |  RUNIT     |      +-------------------+ |
-|   | SATA, USB        |   | DMA        |                |  Windows   |      +-------------------+ |
-|   | SD/eMMC          |   |            |                |  Lookup    +-------   SB Device Bus   | |
-|   | TDM, I2C         |   |            |                |            |      +-------------------+ |
-|   +------------------+   +------------+                +------------+                            |
-|                                                                                                  |
-+--------------------------------------------------------------------------------------------------+
-
diff --git a/docs/plat/marvell/misc/mvebu-amb.rst b/docs/plat/marvell/misc/mvebu-amb.rst
new file mode 100644
index 0000000..d734003
--- /dev/null
+++ b/docs/plat/marvell/misc/mvebu-amb.rst
@@ -0,0 +1,58 @@
+AMB - AXI MBUS address decoding
+===============================
+
+AXI to M-bridge decoding unit driver for Marvell Armada 8K and 8K+ SoCs.
+
+The Runit offers a second level of address windows lookup. It is used to map
+transaction towards the CD BootROM, SPI0, SPI1 and Device bus (NOR).
+
+The Runit contains eight configurable windows. Each window defines a contiguous,
+address space and the properties associated with that address space.
+
+::
+
+  Unit        Bank         ATTR
+  Device-Bus  DEV_BOOT_CS  0x2F
+              DEV_CS0      0x3E
+              DEV_CS1      0x3D
+              DEV_CS2      0x3B
+              DEV_CS3      0x37
+  SPI-0       SPI_A_CS0    0x1E
+              SPI_A_CS1    0x5E
+              SPI_A_CS2    0x9E
+              SPI_A_CS3    0xDE
+              SPI_A_CS4    0x1F
+              SPI_A_CS5    0x5F
+              SPI_A_CS6    0x9F
+              SPI_A_CS7    0xDF
+  SPI         SPI_B_CS0    0x1A
+              SPI_B_CS1    0x5A
+              SPI_B_CS2    0x9A
+              SPI_B_CS3    0xDA
+  BOOT_ROM    BOOT_ROM     0x1D
+  UART        UART         0x01
+
+Mandatory functions
+-------------------
+
+- marvell_get_amb_memory_map
+    Returns the AMB windows configuration and the number of windows
+
+Mandatory structures
+--------------------
+
+- amb_memory_map
+    Array that include the configuration of the windows. Every window/entry is a
+    struct which has 2 parameters:
+
+      - Base address of the window
+      - Attribute of the window
+
+Examples
+--------
+
+.. code:: c
+
+    struct addr_map_win amb_memory_map[] = {
+        {0xf900,	AMB_DEV_CS0_ID},
+    };
diff --git a/docs/plat/marvell/misc/mvebu-amb.txt b/docs/plat/marvell/misc/mvebu-amb.txt
deleted file mode 100644
index 2a7a41e..0000000
--- a/docs/plat/marvell/misc/mvebu-amb.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-AMB - AXI MBUS address decoding
--------------------------------
-
-AXI to M-bridge decoding unit driver for Marvell Armada 8K and 8K+ SoCs.
-
-- The Runit offers a second level of address windows lookup. It is used to map transaction towards
-the CD BootROM, SPI0, SPI1 and Device bus (NOR).
-- The Runit contains eight configurable windows. Each window defines a contiguous,
-address space and the properties associated with that address space.
-
-Unit		Bank		ATTR
-Device-Bus	DEV_BOOT_CS 	0x2F
-		DEV_CS0     	0x3E
-		DEV_CS1     	0x3D
-		DEV_CS2     	0x3B
-		DEV_CS3     	0x37
-SPI-0		SPI_A_CS0 	0x1E
-		SPI_A_CS1 	0x5E
-		SPI_A_CS2 	0x9E
-		SPI_A_CS3 	0xDE
-		SPI_A_CS4 	0x1F
-		SPI_A_CS5 	0x5F
-		SPI_A_CS6 	0x9F
-		SPI_A_CS7 	0xDF
-SPI1		SPI_B_CS0 	0x1A
-		SPI_B_CS1 	0x5A
-		SPI_B_CS2	0x9A
-		SPI_B_CS3	0xDA
-BOOT_ROM	BOOT_ROM	0x1D
-UART		UART		0x01
-
-Mandatory functions:
-	- marvell_get_amb_memory_map
-		returns the AMB windows configuration and the number of windows
-
-Mandatory structures:
-	amb_memory_map - Array that include the configuration of the windows
-	  every window/entry is a struct which has 2 parameters:
-	  - base address of the window
-	  - Attribute of the window
-
-Examples:
-	struct addr_map_win amb_memory_map[] = {
-		{0xf900,	AMB_DEV_CS0_ID},
-	};
diff --git a/docs/plat/marvell/misc/mvebu-ccu.rst b/docs/plat/marvell/misc/mvebu-ccu.rst
new file mode 100644
index 0000000..5bac11f
--- /dev/null
+++ b/docs/plat/marvell/misc/mvebu-ccu.rst
@@ -0,0 +1,33 @@
+Marvell CCU address decoding bindings
+=====================================
+
+CCU configration driver (1st stage address translation) for Marvell Armada 8K and 8K+ SoCs.
+
+The CCU node includes a description of the address decoding configuration.
+
+Mandatory functions
+-------------------
+
+- marvell_get_ccu_memory_map
+    Return the CCU windows configuration and the number of windows of the
+    specific AP.
+
+Mandatory structures
+--------------------
+
+- ccu_memory_map
+    Array that includes the configuration of the windows. Every window/entry is
+    a struct which has 3 parameters:
+
+      - Base address of the window
+      - Size of the window
+      - Target-ID of the window
+
+Example
+-------
+
+.. code:: c
+
+	struct addr_map_win ccu_memory_map[] = {
+		{0x00000000f2000000,     0x00000000e000000,      IO_0_TID}, /* IO window */
+	};
diff --git a/docs/plat/marvell/misc/mvebu-ccu.txt b/docs/plat/marvell/misc/mvebu-ccu.txt
deleted file mode 100644
index 9764027..0000000
--- a/docs/plat/marvell/misc/mvebu-ccu.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Marvell CCU address decoding bindings
-=====================================
-
-CCU configration driver (1st stage address translation) for Marvell Armada 8K and 8K+ SoCs.
-
-The CCU node includes a description of the address decoding configuration.
-
-Mandatory functions:
-	- marvell_get_ccu_memory_map
-		return the CCU windows configuration and the number of windows
-		of the specific AP.
-
-Mandatory structures:
-	ccu_memory_map - Array that includes the configuration of the windows
-	  every window/entry is a struct which has 3 parameters:
-	  - Base address of the window
-	  - Size of the window
-	  - Target-ID of the window
-
-Example:
-	struct addr_map_win ccu_memory_map[] = {
-		{0x00000000f2000000,     0x00000000e000000,      IO_0_TID}, /* IO window */
-	};
diff --git a/docs/plat/marvell/misc/mvebu-io-win.rst b/docs/plat/marvell/misc/mvebu-io-win.rst
new file mode 100644
index 0000000..52845ca
--- /dev/null
+++ b/docs/plat/marvell/misc/mvebu-io-win.rst
@@ -0,0 +1,46 @@
+Marvell IO WIN address decoding bindings
+========================================
+
+IO Window configration driver (2nd stage address translation) for Marvell Armada 8K and 8K+ SoCs.
+
+The IO WIN includes a description of the address decoding configuration.
+
+Transactions that are decoded by CCU windows as IO peripheral, have an additional
+layer of decoding. This additional address decoding layer defines one of the
+following targets:
+
+- **0x0** = BootRom
+- **0x1** = STM (Serial Trace Macro-cell, a programmer's port into trace stream)
+- **0x2** = SPI direct access
+- **0x3** = PCIe registers
+- **0x4** = MCI Port
+- **0x5** = PCIe port
+
+Mandatory functions
+-------------------
+
+- marvell_get_io_win_memory_map
+    Returns the IO windows configuration and the number of windows of the
+    specific AP.
+
+Mandatory structures
+--------------------
+
+- io_win_memory_map
+    Array that include the configuration of the windows. Every window/entry is
+    a struct which has 3 parameters:
+
+	  - Base address of the window
+	  - Size of the window
+	  - Target-ID of the window
+
+Example
+-------
+
+.. code:: c
+
+	struct addr_map_win io_win_memory_map[] = {
+		{0x00000000fe000000,	0x000000001f00000,	PCIE_PORT_TID}, /* PCIe window 31Mb for PCIe port*/
+		{0x00000000ffe00000,	0x000000000100000,	PCIE_REGS_TID}, /* PCI-REG window 64Kb for PCIe-reg*/
+		{0x00000000f6000000,	0x000000000100000,	MCIPHY_TID},	/* MCI window  1Mb for PHY-reg*/
+	};
diff --git a/docs/plat/marvell/misc/mvebu-io-win.txt b/docs/plat/marvell/misc/mvebu-io-win.txt
deleted file mode 100644
index c83ad1f..0000000
--- a/docs/plat/marvell/misc/mvebu-io-win.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Marvell IO WIN address decoding bindings
-=====================================
-
-IO Window configration driver (2nd stage address translation) for Marvell Armada 8K and 8K+ SoCs.
-
-The IO WIN includes a description of the address decoding configuration.
-
-Transactions that are decoded by CCU windows as IO peripheral, have an additional
-layer of decoding. This additional address decoding layer defines one of the
-following targets:
-	0x0 = BootRom
-	0x1 = STM (Serial Trace Macro-cell, a programmer's port into trace stream)
-	0x2 = SPI direct access
-	0x3 = PCIe registers
-	0x4 = MCI Port
-	0x5 = PCIe port
-
-Mandatory functions:
-	- marvell_get_io_win_memory_map
-		returns the IO windows configuration and the number of windows
-		of the specific AP.
-
-Mandatory structures:
-	io_win_memory_map - Array that include the configuration of the windows
-	  every window/entry is a struct which has 3 parameters:
-	  - Base address of the window
-	  - Size of the window
-	  - Target-ID of the window
-
-Example:
-	struct addr_map_win io_win_memory_map[] = {
-		{0x00000000fe000000,	0x000000001f00000,	PCIE_PORT_TID}, /* PCIe window 31Mb for PCIe port*/
-		{0x00000000ffe00000,	0x000000000100000,	PCIE_REGS_TID}, /* PCI-REG window 64Kb for PCIe-reg*/
-		{0x00000000f6000000,	0x000000000100000,	MCIPHY_TID},	/* MCI window  1Mb for PHY-reg*/
-	};
diff --git a/docs/plat/marvell/misc/mvebu-iob.rst b/docs/plat/marvell/misc/mvebu-iob.rst
new file mode 100644
index 0000000..d02a7e8
--- /dev/null
+++ b/docs/plat/marvell/misc/mvebu-iob.rst
@@ -0,0 +1,52 @@
+Marvell IOB address decoding bindings
+=====================================
+
+IO bridge configration driver (3rd stage address translation) for Marvell Armada 8K and 8K+ SoCs.
+
+The IOB includes a description of the address decoding configuration.
+
+IOB supports up to n (in CP110 n=24) windows for external memory transaction.
+When a transaction passes through the IOB, its address is compared to each of
+the enabled windows. If there is a hit and it passes the security checks, it is
+advanced to the target port.
+
+Mandatory functions
+-------------------
+
+- marvell_get_iob_memory_map
+     Returns the IOB windows configuration and the number of windows
+
+Mandatory structures
+--------------------
+
+- iob_memory_map
+     Array that includes the configuration of the windows. Every window/entry is
+     a struct which has 3 parameters:
+
+       - Base address of the window
+       - Size of the window
+       - Target-ID of the window
+
+Target ID options
+-----------------
+
+- **0x0** = Internal configuration space
+- **0x1** = MCI0
+- **0x2** = PEX1_X1
+- **0x3** = PEX2_X1
+- **0x4** = PEX0_X4
+- **0x5** = NAND flash
+- **0x6** = RUNIT (NOR/SPI/BootRoom)
+- **0x7** = MCI1
+
+Example
+-------
+
+.. code:: c
+
+	struct addr_map_win iob_memory_map[] = {
+		{0x00000000f7000000,	0x0000000001000000,	PEX1_TID}, /* PEX1_X1 window */
+		{0x00000000f8000000,	0x0000000001000000,	PEX2_TID}, /* PEX2_X1 window */
+		{0x00000000f6000000,	0x0000000001000000,	PEX0_TID}, /* PEX0_X4 window */
+		{0x00000000f9000000,	0x0000000001000000,	NAND_TID}  /* NAND window */
+	};
diff --git a/docs/plat/marvell/misc/mvebu-iob.txt b/docs/plat/marvell/misc/mvebu-iob.txt
deleted file mode 100644
index 97ec09d..0000000
--- a/docs/plat/marvell/misc/mvebu-iob.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Marvell IOB address decoding bindings
-=====================================
-
-IO bridge configration driver (3rd stage address translation) for Marvell Armada 8K and 8K+ SoCs.
-
-The IOB includes a description of the address decoding configuration.
-
-IOB supports up to n (in CP110 n=24) windows for external memory transaction.
-When a transaction passes through the IOB, its address is compared to each of
-the enabled windows. If there is a hit and it passes the security checks, it is
-advanced to the target port.
-
-Mandatory functions:
-	- marvell_get_iob_memory_map
-		returns the IOB windows configuration and the number of windows
-
-Mandatory structures:
-	iob_memory_map - Array that include the configuration of the windows
-	  every window/entry is a struct which has 3 parameters:
-	  - Base address of the window
-	  - Size of the window
-	  - Target-ID of the window
-
-Target ID options:
-	- 0x0 = Internal configuration space
-	- 0x1 = MCI0
-	- 0x2 = PEX1_X1
-	- 0x3 = PEX2_X1
-	- 0x4 = PEX0_X4
-	- 0x5 = NAND flash
-	- 0x6 = RUNIT (NOR/SPI/BootRoom)
-	- 0x7 = MCI1
-
-Example:
-	struct addr_map_win iob_memory_map[] = {
-		{0x00000000f7000000,	0x0000000001000000,	PEX1_TID}, /* PEX1_X1 window */
-		{0x00000000f8000000,	0x0000000001000000,	PEX2_TID}, /* PEX2_X1 window */
-		{0x00000000f6000000,	0x0000000001000000,	PEX0_TID}, /* PEX0_X4 window */
-		{0x00000000f9000000,	0x0000000001000000,	NAND_TID}  /* NAND window */
-	};
diff --git a/docs/plat/marvell/porting.rst b/docs/plat/marvell/porting.rst
new file mode 100644
index 0000000..8fc1c1f
--- /dev/null
+++ b/docs/plat/marvell/porting.rst
@@ -0,0 +1,163 @@
+TF-A Porting Guide for Marvell Platforms
+========================================
+
+This section describes how to port TF-A to a customer board, assuming that the
+SoC being used is already supported in TF-A.
+
+
+Source Code Structure
+---------------------
+
+- The customer platform specific code shall reside under ``plat/marvell/<soc family>/<soc>_cust``
+  (e.g. 'plat/marvell/a8k/a7040_cust').
+- The platform name for build purposes is called ``<soc>_cust`` (e.g. ``a7040_cust``).
+- The build system will reuse all files from within the soc directory, and take only the porting
+  files from the customer platform directory.
+
+Files that require porting are located at ``plat/marvell/<soc family>/<soc>_cust`` directory.
+
+
+Armada-70x0/Armada-80x0 Porting
+-------------------------------
+
+SoC Physical Address Map (marvell_plat_config.c)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This file describes the SoC physical memory mapping to be used for the CCU,
+IOWIN, AXI-MBUS and IOB address decode units (Refer to the functional spec for
+more details).
+
+In most cases, using the default address decode windows should work OK.
+
+In cases where a special physical address map is needed (e.g. Special size for
+PCIe MEM windows, large memory mapped SPI flash...), then porting of the SoC
+memory map is required.
+
+.. note::
+   For a detailed information on how CCU, IOWIN, AXI-MBUS & IOB work, please
+   refer to the SoC functional spec, and under
+   ``docs/marvell/misc/mvebu-[ccu/iob/amb/io-win].txt`` files.
+
+boot loader recovery (marvell_plat_config.c)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- Background:
+
+  Boot rom can skip the current image and choose to boot from next position if a
+  specific value (``0xDEADB002``) is returned by the ble main function. This
+  feature is used for boot loader recovery by booting from a valid flash-image
+  saved in next position on flash (e.g. address 2M in SPI flash).
+
+  Supported options to implement the skip request are:
+    - GPIO
+    - I2C
+    - User defined
+
+- Porting:
+
+  Under marvell_plat_config.c, implement struct skip_image that includes
+  specific board parameters.
+
+  .. warning::
+     To disable this feature make sure the struct skip_image is not implemented.
+
+- Example:
+
+In A7040-DB specific implementation
+(``plat/marvell/a8k/a70x0/board/marvell_plat_config.c``), the image skip is
+implemented using GPIO: mpp 33 (SW5).
+
+Before resetting the board make sure there is a valid image on the next flash
+address:
+
+ -tftp [valid address] flash-image.bin
+ -sf update [valid address] 0x2000000 [size]
+
+Press reset and keep pressing the button connected to the chosen GPIO pin. A
+skip image request message is printed on the screen and boot rom boots from the
+saved image at the next position.
+
+DDR Porting (dram_port.c)
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This file defines the dram topology and parameters of the target board.
+
+The DDR code is part of the BLE component, which is an extension of ARM Trusted
+Firmware (TF-A).
+
+The DDR driver called mv_ddr is released separately apart from TF-A sources.
+
+The BLE and consequently, the DDR init code is executed at the early stage of
+the boot process.
+
+Each supported platform of the TF-A has its own DDR porting file called
+dram_port.c located at ``atf/plat/marvell/a8k/<platform>/board`` directory.
+
+Please refer to '<path_to_mv_ddr_sources>/doc/porting_guide.txt' for detailed
+porting description.
+
+The build target directory is "build/<platform>/release/ble".
+
+Comphy Porting (phy-porting-layer.h or phy-default-porting-layer.h)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- Background:
+    Some of the comphy's parameters value depend on the HW connection between
+    the SoC and the PHY. Every board type has specific HW characteristics like
+    wire length. Due to those differences some comphy parameters vary between
+    board types. Therefore each board type can have its own list of values for
+    all relevant comphy parameters. The PHY porting layer specifies which
+    parameters need to be suited and the board designer should provide relevant
+    values.
+
+    .. seealso::
+        For XFI/SFI comphy type there is procedure "rx_training" which eases
+        process of suiting some of the parameters. Please see :ref:`uboot_cmd`
+        section: rx_training.
+
+    The PHY porting layer simplifies updating static values per board type,
+    which are now grouped in one place.
+
+    .. note::
+        The parameters for the same type of comphy may vary even for the same
+        board type, it is because the lanes from comphy-x to some PHY may have
+        different HW characteristic than lanes from comphy-y to the same
+        (multiplexed) or other PHY.
+
+- Porting:
+    The porting layer for PHY was introduced in TF-A. There is one file
+    ``drivers/marvell/comphy/phy-default-porting-layer.h`` which contains the
+    defaults. Those default parameters are used only if there is no appropriate
+    phy-porting-layer.h file under: ``plat/marvell/<soc
+    family>/<platform>/board/phy-porting-layer.h``. If the phy-porting-layer.h
+    exists, the phy-default-porting-layer.h is not going to be included.
+
+    .. warning::
+        Not all comphy types are already reworked to support the PHY porting
+        layer, currently the porting layer is supported for XFI/SFI and SATA
+        comphy types.
+
+    The easiest way to prepare the PHY porting layer for custom board is to copy
+    existing example to a new platform:
+
+    - cp ``plat/marvell/a8k/a80x0/board/phy-porting-layer.h`` "plat/marvell/<soc family>/<platform>/board/phy-porting-layer.h"
+    - adjust relevant parameters or
+    - if different comphy index is used for specific feature, move it to proper table entry and then adjust.
+
+    .. note::
+        The final table size with comphy parameters can be different, depending
+        on the CP module count for given SoC type.
+
+- Example:
+    Example porting layer for armada-8040-db is under:
+    ``plat/marvell/a8k/a80x0/board/phy-porting-layer.h``
+
+    .. note::
+        If there is no PHY porting layer for new platform (missing
+        phy-porting-layer.h), the default values are used
+        (drivers/marvell/comphy/phy-default-porting-layer.h) and the user is
+        warned:
+
+    .. warning::
+        "Using default comphy parameters - it may be required to suit them for
+        your board".
diff --git a/docs/plat/marvell/porting.txt b/docs/plat/marvell/porting.txt
deleted file mode 100644
index f9a39a0..0000000
--- a/docs/plat/marvell/porting.txt
+++ /dev/null
@@ -1,118 +0,0 @@
-.. _porting:
-
-TF-A Porting Guide
-=================
-
-This section describes how to port TF-A to a customer board, assuming that the SoC being used is already supported
-in TF-A.
-
-
-Source Code Structure
----------------------
-- The customer platform specific code shall reside under "plat/marvell/<soc family>/<soc>_cust"
-	(e.g. 'plat/marvell/a8k/a7040_cust').
-- The platform name for build purposes is called "<soc>_cust" (e.g. a7040_cust).
-- The build system will reuse all files from within the soc directory, and take only the porting
-  files from the customer platform directory.
-
-Files that require porting are located at "plat/marvell/<soc family>/<soc>_cust" directory.
-
-
-Armada-70x0/Armada-80x0 Porting
--------------------------------
-
-  - SoC Physical Address Map (marvell_plat_config.c):
-	- This file describes the SoC physical memory mapping to be used for the CCU, IOWIN, AXI-MBUS and IOB
-	  address decode units (Refer to the functional spec for more details).
-	- In most cases, using the default address decode windows should work OK.
-	- In cases where a special physical address map is needed (e.g. Special size for PCIe MEM windows,
-	  large memory mapped SPI flash...), then porting of the SoC memory map is required.
-	- Note: For a detailed information on how CCU, IOWIN, AXI-MBUS & IOB work, please refer to the SoC functional spec,
-	  and under "docs/marvell/misc/mvebu-[ccu/iob/amb/io-win].txt" files.
-
-  - boot loader recovery (marvell_plat_config.c):
-	- Background:
-		boot rom can skip the current image and choose to boot from next position if a specific value
-		(0xDEADB002) is returned by the ble main function. This feature is used for boot loader recovery
-		by booting from a valid flash-image saved in next position on flash (e.g. address 2M in SPI flash).
-
-		Supported options to implement the skip request are:
-			- GPIO
-			- I2C
-			- User defined
-
-	- Porting:
-		Under marvell_plat_config.c, implement struct skip_image that includes specific board parameters.
-		.. warning:: to disable this feature make sure the struct skip_image is not implemented.
-
-	- Example:
-		In A7040-DB specific implementation (plat/marvell/a8k/a70x0/board/marvell_plat_config.c),
-		the image skip is implemented using GPIO: mpp 33 (SW5).
-
-		Before resetting the board make sure there is a valid image on the next flash address:
-			-tftp [valid address] flash-image.bin
-			-sf update [valid address] 0x2000000 [size]
-
-		Press reset and keep pressing the button connected to the chosen GPIO pin. A skip image request
-		message is printed on the screen and boot rom boots from the saved image at the next position.
-
-  - DDR Porting (dram_port.c):
-	- This file defines the dram topology and parameters of the target board.
-	- The DDR code is part of the BLE component, which is an extension of ARM Trusted Firmware (TF-A).
-	- The DDR driver called mv_ddr is released separately apart from TF-A sources.
-	- The BLE and consequently, the DDR init code is executed at the early stage of the boot process.
-	- Each supported platform of the TF-A has its own DDR porting file called dram_port.c located at
-	  ``atf/plat/marvell/a8k/<platform>/board`` directory.
-	- Please refer to '<path_to_mv_ddr_sources>/doc/porting_guide.txt' for detailed porting description.
-	- The build target directory is "build/<platform>/release/ble".
-
-  - Comphy Porting (phy-porting-layer.h or phy-default-porting-layer.h)
-	- Background:
-		Some of the comphy's parameters value depend on the HW connection between the SoC and the PHY. Every
-		board type has specific HW characteristics like wire length. Due to those differences some comphy
-		parameters vary between board types. Therefore each board type can have its own list of values for
-		all relevant comphy parameters. The PHY porting layer specifies which parameters need to be suited and
-		the board designer should provide relevant values.
-
-		.. seealso::
-			For XFI/SFI comphy type there is procedure "rx_training" which eases process of suiting some of
-			the parameters. Please see :ref:`uboot_cmd` section: rx_training.
-
-		The PHY porting layer simplifies updating static values per board type, which are now grouped in one place.
-
-		.. note::
-			The parameters for the same type of comphy may vary even for the same board type, it is because
-			the lanes from comphy-x to some PHY may have different HW characteristic than lanes from
-			comphy-y to the same (multiplexed) or other PHY.
-
-	- Porting:
-		The porting layer for PHY was introduced in TF-A. There is one file
-		``drivers/marvell/comphy/phy-default-porting-layer.h`` which contains the defaults. Those default
-		parameters are used only if there is no appropriate phy-porting-layer.h file under:
-		``plat/marvell/<soc family>/<platform>/board/phy-porting-layer.h``. If the phy-porting-layer.h exists,
-		the phy-default-porting-layer.h is not going to be included.
-
-		.. warning::
-			Not all comphy types are already reworked to support the PHY porting layer, currently the porting
-			layer is supported for XFI/SFI and SATA comphy types.
-
-		The easiest way to prepare the PHY porting layer for custom board is to copy existing example to a new
-		platform:
-
-		- cp ``plat/marvell/a8k/a80x0/board/phy-porting-layer.h`` "plat/marvell/<soc family>/<platform>/board/phy-porting-layer.h"
-		- adjust relevant parameters or
-		- if different comphy index is used for specific feature, move it to proper table entry and then adjust.
-
-		.. note::
-			The final table size with comphy parameters can be different, depending on the CP module count for
-			given SoC type.
-
-	- Example:
-		Example porting layer for armada-8040-db is under: ``plat/marvell/a8k/a80x0/board/phy-porting-layer.h``
-
-		.. note::
-			If there is no PHY porting layer for new platform (missing phy-porting-layer.h), the default
-			values are used (drivers/marvell/comphy/phy-default-porting-layer.h) and the user is warned:
-
-		.. warning::
-			"Using default comphy parameters - it may be required to suit them for your board".
diff --git a/docs/plat/meson-g12a.rst b/docs/plat/meson-g12a.rst
new file mode 100644
index 0000000..1021da4
--- /dev/null
+++ b/docs/plat/meson-g12a.rst
@@ -0,0 +1,27 @@
+Amlogic Meson S905X2 (G12A)
+==========================
+
+The Amlogic Meson S905X2 is a SoC with a quad core Arm Cortex-A53 running at
+~1.8GHz. It also contains a Cortex-M3 used as SCP.
+
+This port is a minimal implementation of BL31 capable of booting mainline U-Boot
+and Linux:
+
+- SCPI support.
+- Basic PSCI support (CPU_ON, CPU_OFF, SYSTEM_RESET, SYSTEM_OFF). Note that CPU0
+  can't be turned off, so there is a workaround to hide this from the caller.
+- GICv2 driver set up.
+- Basic SIP services (read efuse data, enable/disable JTAG).
+
+In order to build it:
+
+.. code:: shell
+
+    CROSS_COMPILE=aarch64-linux-gnu- make DEBUG=1 PLAT=g12a
+
+This port has been tested on a SEI510 board. After building it, follow the
+instructions in the `gxlimg repository` or `U-Boot repository`_, replacing the
+mentioned **bl31.img** by the one built from this port.
+
+.. _gxlimg repository: https://github.com/repk/gxlimg/blob/master/README.g12a
+.. _U-Boot repository: https://github.com/u-boot/u-boot/blob/master/board/amlogic/sei510/README
diff --git a/docs/plat/poplar.rst b/docs/plat/poplar.rst
index 5884ed9..215f551 100644
--- a/docs/plat/poplar.rst
+++ b/docs/plat/poplar.rst
@@ -1,5 +1,5 @@
-Description
-===========
+Poplar
+======
 
 Poplar is the first development board compliant with the 96Boards Enterprise
 Edition TV Platform specification.
@@ -35,10 +35,10 @@
     l-loader --> Trusted Firmware-A --> u-boot
 
 How to build
-============
+------------
 
 Code Locations
---------------
+~~~~~~~~~~~~~~
 
 -  Trusted Firmware-A:
    `link <https://github.com/ARM-software/arm-trusted-firmware>`__
@@ -50,7 +50,7 @@
    `link <http://git.denx.de/u-boot.git>`__
 
 Build Procedure
----------------
+~~~~~~~~~~~~~~~
 
 -  Fetch all the above 3 repositories into local host.
    Make all the repositories in the same ${BUILD\_PATH}.
@@ -89,7 +89,7 @@
 working firmware to eMMC.
 
 Boot trace
-==========
+----------
 
 ::
 
diff --git a/docs/plat/rpi4.rst b/docs/plat/rpi4.rst
new file mode 100644
index 0000000..0f529c1
--- /dev/null
+++ b/docs/plat/rpi4.rst
@@ -0,0 +1,85 @@
+Raspberry Pi 4
+==============
+
+The `Raspberry Pi 4`_ is an inexpensive single-board computer that contains four
+Arm Cortex-A72 cores. Also in contrast to previous Raspberry Pi versions this
+model has a GICv2 interrupt controller.
+
+This port is a minimal port to support loading non-secure EL2 payloads such
+as a 64-bit Linux kernel. Other payloads such as U-Boot or EDK-II should work
+as well, but have not been tested at this point.
+
+**IMPORTANT NOTE**: This port isn't secure. All of the memory used is DRAM,
+which is available from both the Non-secure and Secure worlds. The SoC does
+not seem to feature a secure memory controller of any kind, so portions of
+DRAM can't be protected properly from the Non-secure world.
+
+Build Instructions
+------------------
+
+There are no real configuration options at this point, so there is only
+one universal binary (bl31.bin), which can be built with:
+
+.. code:: shell
+
+    CROSS_COMPILE=aarch64-linux-gnu- make PLAT=rpi4 DEBUG=1
+
+Copy the generated build/rpi4/debug/bl31.bin to the SD card, either
+renaming it to ``armstub8.bin`` or adding an entry starting with ``armstub=``,
+then followed by the respective file name to ``config.txt``.
+You should have AArch64 code in the file loaded as the "kernel", as BL31
+will drop into AArch64/EL2 to the respective load address.
+arm64 Linux kernels are known to work this way.
+
+Other options that should be set in ``config.txt`` to properly boot 64-bit
+kernels are:
+
+::
+
+    enable_uart=1
+    arm_64bit=1
+    enable_gic=1
+
+The BL31 code will patch the provided device tree blob in memory to advertise
+PSCI support, also will add a reserved-memory node to the DT to tell the
+non-secure payload to not touch the resident TF-A code.
+
+If you connect a serial cable between the Mini UART and your computer, and
+connect to it (for example, with ``screen /dev/ttyUSB0 115200``) you should
+see some text from BL31, followed by the output of the EL2 payload.
+The command line provided is read from the ``cmdline.txt`` file on the SD card.
+
+TF-A port design
+----------------
+
+In contrast to the existing Raspberry Pi 3 port this one here is a BL31-only
+port, also it deviates quite a lot from the RPi3 port in many other ways.
+There is not so much difference between the two models, so eventually those
+two could be (more) unified in the future.
+
+As with the previous models, the GPU and its firmware are the first entity to
+run after the SoC gets its power. The on-chip Boot ROM loads the next stage
+(bootcode.bin) from flash (EEPROM), which is again GPU code.
+This part knows how to access the MMC controller and how to parse a FAT
+filesystem, so it will load further compononents and configuration files
+from the first FAT partition on the SD card.
+
+To accommodate this existing way of configuring and setting up the board,
+we use as much of this workflow as possible.
+If bootcode.bin finds a file called ``armstub8.bin`` on the SD card or it gets
+pointed to such code by finding a ``armstub=`` key in ``config.txt``, it will
+load this file to the beginning of DRAM (address 0) and execute it in
+AArch64 EL3.
+But before doing that, it will also load a "kernel" and the device tree into
+memory. The load addresses have a default, but can also be changed by
+setting them in ``config.txt``. If the GPU firmware finds a magic value in the
+armstub image file, it will put those two load addresses in memory locations
+near the beginning of memory, where TF-A code picks them up.
+
+To keep things simple, we will just use the kernel load address as the BL33
+entry point, also put the DTB address in the x0 register, as requested by
+the arm64 Linux kernel boot protocol. This does not necessarily mean that
+the EL2 payload needs to be a Linux kernel, a bootloader or any other kernel
+would work as well, as long as it can cope with having the DT address in
+register x0. If the payload has other means of finding the device tree, it
+could ignore this address as well.
diff --git a/drivers/amlogic/crypto/sha_dma.c b/drivers/amlogic/crypto/sha_dma.c
index d48ded9..fceb1c0 100644
--- a/drivers/amlogic/crypto/sha_dma.c
+++ b/drivers/amlogic/crypto/sha_dma.c
@@ -9,10 +9,7 @@
 #include <crypto/sha_dma.h>
 #include <lib/mmio.h>
 
-#define AML_SHA_DMA_BASE 0xc883e000
-
-#define AML_SHA_DMA_DESC (AML_SHA_DMA_BASE + 0x08)
-#define AML_SHA_DMA_STATUS (AML_SHA_DMA_BASE + 0x18)
+#include "aml_private.h"
 
 #define ASD_MODE_SHA224 0x7
 #define ASD_MODE_SHA256 0x6
diff --git a/drivers/arm/gic/v3/gicv3_main.c b/drivers/arm/gic/v3/gicv3_main.c
index 94a20ba..fb49a57 100644
--- a/drivers/arm/gic/v3/gicv3_main.c
+++ b/drivers/arm/gic/v3/gicv3_main.c
@@ -16,7 +16,6 @@
 #include "gicv3_private.h"
 
 const gicv3_driver_data_t *gicv3_driver_data;
-static unsigned int gicv2_compat;
 
 /*
  * Spinlock to guard registers needing read-modify-write. APIs protected by this
@@ -60,51 +59,61 @@
 void __init gicv3_driver_init(const gicv3_driver_data_t *plat_driver_data)
 {
 	unsigned int gic_version;
+	unsigned int gicv2_compat;
 
 	assert(plat_driver_data != NULL);
 	assert(plat_driver_data->gicd_base != 0U);
-	assert(plat_driver_data->gicr_base != 0U);
 	assert(plat_driver_data->rdistif_num != 0U);
 	assert(plat_driver_data->rdistif_base_addrs != NULL);
 
 	assert(IS_IN_EL3());
 
-	assert(plat_driver_data->interrupt_props_num > 0 ?
-	       plat_driver_data->interrupt_props != NULL : 1);
+	assert((plat_driver_data->interrupt_props_num != 0U) ?
+	       (plat_driver_data->interrupt_props != NULL) : 1);
 
 	/* Check for system register support */
-#ifdef __aarch64__
+#ifndef __aarch64__
+	assert((read_id_pfr1() &
+			(ID_PFR1_GIC_MASK << ID_PFR1_GIC_SHIFT)) != 0U);
+#else
 	assert((read_id_aa64pfr0_el1() &
 			(ID_AA64PFR0_GIC_MASK << ID_AA64PFR0_GIC_SHIFT)) != 0U);
-#else
-	assert((read_id_pfr1() & (ID_PFR1_GIC_MASK << ID_PFR1_GIC_SHIFT)) != 0U);
-#endif /* __aarch64__ */
+#endif /* !__aarch64__ */
 
 	/* The GIC version should be 3.0 */
 	gic_version = gicd_read_pidr2(plat_driver_data->gicd_base);
-	gic_version >>=	PIDR2_ARCH_REV_SHIFT;
+	gic_version >>= PIDR2_ARCH_REV_SHIFT;
 	gic_version &= PIDR2_ARCH_REV_MASK;
 	assert(gic_version == ARCH_REV_GICV3);
 
 	/*
-	 * Find out whether the GIC supports the GICv2 compatibility mode. The
-	 * ARE_S bit resets to 0 if supported
+	 * Find out whether the GIC supports the GICv2 compatibility mode.
+	 * The ARE_S bit resets to 0 if supported
 	 */
 	gicv2_compat = gicd_read_ctlr(plat_driver_data->gicd_base);
 	gicv2_compat >>= CTLR_ARE_S_SHIFT;
-	gicv2_compat = !(gicv2_compat & CTLR_ARE_S_MASK);
+	gicv2_compat = gicv2_compat & CTLR_ARE_S_MASK;
 
-	/*
-	 * Find the base address of each implemented Redistributor interface.
-	 * The number of interfaces should be equal to the number of CPUs in the
-	 * system. The memory for saving these addresses has to be allocated by
-	 * the platform port
-	 */
-	gicv3_rdistif_base_addrs_probe(plat_driver_data->rdistif_base_addrs,
-					   plat_driver_data->rdistif_num,
-					   plat_driver_data->gicr_base,
-					   plat_driver_data->mpidr_to_core_pos);
-
+	if (plat_driver_data->gicr_base != 0U) {
+		/*
+		 * Find the base address of each implemented Redistributor interface.
+		 * The number of interfaces should be equal to the number of CPUs in the
+		 * system. The memory for saving these addresses has to be allocated by
+		 * the platform port
+		 */
+		gicv3_rdistif_base_addrs_probe(plat_driver_data->rdistif_base_addrs,
+						   plat_driver_data->rdistif_num,
+						   plat_driver_data->gicr_base,
+						   plat_driver_data->mpidr_to_core_pos);
+#if !HW_ASSISTED_COHERENCY
+		/*
+		 * Flush the rdistif_base_addrs[] contents linked to the GICv3 driver.
+		 */
+		flush_dcache_range((uintptr_t)(plat_driver_data->rdistif_base_addrs),
+			plat_driver_data->rdistif_num *
+			sizeof(*(plat_driver_data->rdistif_base_addrs)));
+#endif
+	}
 	gicv3_driver_data = plat_driver_data;
 
 	/*
@@ -112,19 +121,19 @@
 	 * enabled. When the secondary CPU boots up, it initializes the
 	 * GICC/GICR interface with the caches disabled. Hence flush the
 	 * driver data to ensure coherency. This is not required if the
-	 * platform has HW_ASSISTED_COHERENCY or WARMBOOT_ENABLE_DCACHE_EARLY
-	 * enabled.
+	 * platform has HW_ASSISTED_COHERENCY enabled.
 	 */
-#if !(HW_ASSISTED_COHERENCY || WARMBOOT_ENABLE_DCACHE_EARLY)
-	flush_dcache_range((uintptr_t) &gicv3_driver_data,
-			sizeof(gicv3_driver_data));
-	flush_dcache_range((uintptr_t) gicv3_driver_data,
-			sizeof(*gicv3_driver_data));
+#if !HW_ASSISTED_COHERENCY
+	flush_dcache_range((uintptr_t)&gicv3_driver_data,
+		sizeof(gicv3_driver_data));
+	flush_dcache_range((uintptr_t)gicv3_driver_data,
+		sizeof(*gicv3_driver_data));
 #endif
 
-	INFO("GICv3 %s legacy support detected."
-			" ARM GICV3 driver initialized in EL3\n",
-			gicv2_compat ? "with" : "without");
+	INFO("GICv3 with%s legacy support detected."
+			" ARM GICv3 driver initialized in EL3\n",
+			(gicv2_compat == 0U) ? "" : "out");
+
 }
 
 /*******************************************************************************
@@ -192,6 +201,7 @@
 	gicv3_rdistif_on(proc_num);
 
 	gicr_base = gicv3_driver_data->rdistif_base_addrs[proc_num];
+	assert(gicr_base != 0U);
 
 	/* Set the default attribute of all SGIs and PPIs */
 	gicv3_ppi_sgi_config_defaults(gicr_base);
@@ -313,6 +323,7 @@
 
 	/* Mark the connected core as asleep */
 	gicr_base = gicv3_driver_data->rdistif_base_addrs[proc_num];
+	assert(gicr_base != 0U);
 	gicv3_rdistif_mark_core_asleep(gicr_base);
 }
 
@@ -629,7 +640,9 @@
 	num_ints &= TYPER_IT_LINES_NO_MASK;
 	num_ints = (num_ints + 1U) << 5;
 
-	assert(num_ints <= (MAX_SPI_ID + 1U));
+	/* Filter out special INTIDs 1020-1023 */
+	if (num_ints > (MAX_SPI_ID + 1U))
+		num_ints = MAX_SPI_ID + 1U;
 
 	/* Wait for pending write to complete */
 	gicd_wait_for_pending_write(gicd_base);
@@ -637,31 +650,31 @@
 	/* Save the GICD_CTLR */
 	dist_ctx->gicd_ctlr = gicd_read_ctlr(gicd_base);
 
-	/* Save GICD_IGROUPR for INTIDs 32 - 1020 */
+	/* Save GICD_IGROUPR for INTIDs 32 - 1019 */
 	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, igroupr, IGROUPR);
 
-	/* Save GICD_ISENABLER for INT_IDs 32 - 1020 */
+	/* Save GICD_ISENABLER for INT_IDs 32 - 1019 */
 	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, isenabler, ISENABLER);
 
-	/* Save GICD_ISPENDR for INTIDs 32 - 1020 */
+	/* Save GICD_ISPENDR for INTIDs 32 - 1019 */
 	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, ispendr, ISPENDR);
 
-	/* Save GICD_ISACTIVER for INTIDs 32 - 1020 */
+	/* Save GICD_ISACTIVER for INTIDs 32 - 1019 */
 	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, isactiver, ISACTIVER);
 
-	/* Save GICD_IPRIORITYR for INTIDs 32 - 1020 */
+	/* Save GICD_IPRIORITYR for INTIDs 32 - 1019 */
 	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, ipriorityr, IPRIORITYR);
 
-	/* Save GICD_ICFGR for INTIDs 32 - 1020 */
+	/* Save GICD_ICFGR for INTIDs 32 - 1019 */
 	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, icfgr, ICFGR);
 
-	/* Save GICD_IGRPMODR for INTIDs 32 - 1020 */
+	/* Save GICD_IGRPMODR for INTIDs 32 - 1019 */
 	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, igrpmodr, IGRPMODR);
 
-	/* Save GICD_NSACR for INTIDs 32 - 1020 */
+	/* Save GICD_NSACR for INTIDs 32 - 1019 */
 	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, nsacr, NSACR);
 
-	/* Save GICD_IROUTER for INTIDs 32 - 1024 */
+	/* Save GICD_IROUTER for INTIDs 32 - 1019 */
 	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, irouter, IROUTER);
 
 	/*
@@ -707,24 +720,26 @@
 	num_ints &= TYPER_IT_LINES_NO_MASK;
 	num_ints = (num_ints + 1U) << 5;
 
-	assert(num_ints <= (MAX_SPI_ID + 1U));
+	/* Filter out special INTIDs 1020-1023 */
+	if (num_ints > (MAX_SPI_ID + 1U))
+		num_ints = MAX_SPI_ID + 1U;
 
-	/* Restore GICD_IGROUPR for INTIDs 32 - 1020 */
+	/* Restore GICD_IGROUPR for INTIDs 32 - 1019 */
 	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, igroupr, IGROUPR);
 
-	/* Restore GICD_IPRIORITYR for INTIDs 32 - 1020 */
+	/* Restore GICD_IPRIORITYR for INTIDs 32 - 1019 */
 	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, ipriorityr, IPRIORITYR);
 
-	/* Restore GICD_ICFGR for INTIDs 32 - 1020 */
+	/* Restore GICD_ICFGR for INTIDs 32 - 1019 */
 	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, icfgr, ICFGR);
 
-	/* Restore GICD_IGRPMODR for INTIDs 32 - 1020 */
+	/* Restore GICD_IGRPMODR for INTIDs 32 - 1019 */
 	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, igrpmodr, IGRPMODR);
 
-	/* Restore GICD_NSACR for INTIDs 32 - 1020 */
+	/* Restore GICD_NSACR for INTIDs 32 - 1019 */
 	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, nsacr, NSACR);
 
-	/* Restore GICD_IROUTER for INTIDs 32 - 1020 */
+	/* Restore GICD_IROUTER for INTIDs 32 - 1019 */
 	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, irouter, IROUTER);
 
 	/*
@@ -732,13 +747,13 @@
 	 * configured.
 	 */
 
-	/* Restore GICD_ISENABLER for INT_IDs 32 - 1020 */
+	/* Restore GICD_ISENABLER for INT_IDs 32 - 1019 */
 	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, isenabler, ISENABLER);
 
-	/* Restore GICD_ISPENDR for INTIDs 32 - 1020 */
+	/* Restore GICD_ISPENDR for INTIDs 32 - 1019 */
 	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, ispendr, ISPENDR);
 
-	/* Restore GICD_ISACTIVER for INTIDs 32 - 1020 */
+	/* Restore GICD_ISACTIVER for INTIDs 32 - 1019 */
 	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, isactiver, ISACTIVER);
 
 	/* Restore the GICD_CTLR */
@@ -1081,3 +1096,71 @@
 
 	return old_mask;
 }
+
+/*******************************************************************************
+ * This function delegates the responsibility of discovering the corresponding
+ * Redistributor frames to each CPU itself. It is a modified version of
+ * gicv3_rdistif_base_addrs_probe() and is executed by each CPU in the platform
+ * unlike the previous way in which only the Primary CPU did the discovery of
+ * all the Redistributor frames for every CPU. It also handles the scenario in
+ * which the frames of various CPUs are not contiguous in physical memory.
+ ******************************************************************************/
+int gicv3_rdistif_probe(const uintptr_t gicr_frame)
+{
+	u_register_t mpidr;
+	unsigned int proc_num, proc_self;
+	uint64_t typer_val;
+	uintptr_t rdistif_base;
+	bool gicr_frame_found = false;
+
+	assert(gicv3_driver_data->gicr_base == 0U);
+
+	/* Ensure this function is called with Data Cache enabled */
+#ifndef __aarch64__
+	assert((read_sctlr() & SCTLR_C_BIT) != 0U);
+#else
+	assert((read_sctlr_el3() & SCTLR_C_BIT) != 0U);
+#endif /* !__aarch64__ */
+
+	proc_self = gicv3_driver_data->mpidr_to_core_pos(read_mpidr_el1());
+	rdistif_base = gicr_frame;
+	do {
+		typer_val = gicr_read_typer(rdistif_base);
+		if (gicv3_driver_data->mpidr_to_core_pos != NULL) {
+			mpidr = mpidr_from_gicr_typer(typer_val);
+			proc_num = gicv3_driver_data->mpidr_to_core_pos(mpidr);
+		} else {
+			proc_num = (unsigned int)(typer_val >> TYPER_PROC_NUM_SHIFT) &
+					TYPER_PROC_NUM_MASK;
+		}
+		if (proc_num == proc_self) {
+			/* The base address doesn't need to be initialized on
+			 * every warm boot.
+			 */
+			if (gicv3_driver_data->rdistif_base_addrs[proc_num] != 0U)
+				return 0;
+			gicv3_driver_data->rdistif_base_addrs[proc_num] =
+			rdistif_base;
+			gicr_frame_found = true;
+			break;
+		}
+		rdistif_base += (uintptr_t)(ULL(1) << GICR_PCPUBASE_SHIFT);
+	} while ((typer_val & TYPER_LAST_BIT) == 0U);
+
+	if (!gicr_frame_found)
+		return -1;
+
+	/*
+	 * Flush the driver data to ensure coherency. This is
+	 * not required if platform has HW_ASSISTED_COHERENCY
+	 * enabled.
+	 */
+#if !HW_ASSISTED_COHERENCY
+	/*
+	 * Flush the rdistif_base_addrs[] contents linked to the GICv3 driver.
+	 */
+	flush_dcache_range((uintptr_t)&(gicv3_driver_data->rdistif_base_addrs[proc_num]),
+		sizeof(*(gicv3_driver_data->rdistif_base_addrs)));
+#endif
+	return 0; /* Found matching GICR frame */
+}
diff --git a/drivers/partition/gpt.c b/drivers/partition/gpt.c
index 4577f06..1b804de 100644
--- a/drivers/partition/gpt.c
+++ b/drivers/partition/gpt.c
@@ -52,9 +52,10 @@
 	if (result != 0) {
 		return result;
 	}
-	entry->start = (uint64_t)gpt_entry->first_lba * PARTITION_BLOCK_SIZE;
+	entry->start = (uint64_t)gpt_entry->first_lba *
+		       PLAT_PARTITION_BLOCK_SIZE;
 	entry->length = (uint64_t)(gpt_entry->last_lba -
 				   gpt_entry->first_lba + 1) *
-			PARTITION_BLOCK_SIZE;
+			PLAT_PARTITION_BLOCK_SIZE;
 	return 0;
 }
diff --git a/drivers/partition/partition.c b/drivers/partition/partition.c
index 7fdbf53..68133ea 100644
--- a/drivers/partition/partition.c
+++ b/drivers/partition/partition.c
@@ -15,7 +15,7 @@
 #include <drivers/partition/mbr.h>
 #include <plat/common/platform.h>
 
-static uint8_t mbr_sector[PARTITION_BLOCK_SIZE];
+static uint8_t mbr_sector[PLAT_PARTITION_BLOCK_SIZE];
 static partition_entry_list_t list;
 
 #if LOG_LEVEL >= LOG_LEVEL_VERBOSE
@@ -57,15 +57,15 @@
 		return result;
 	}
 	result = io_read(image_handle, (uintptr_t)&mbr_sector,
-			 PARTITION_BLOCK_SIZE, &bytes_read);
+			 PLAT_PARTITION_BLOCK_SIZE, &bytes_read);
 	if (result != 0) {
 		WARN("Failed to read data (%i)\n", result);
 		return result;
 	}
 
 	/* Check MBR boot signature. */
-	if ((mbr_sector[PARTITION_BLOCK_SIZE - 2] != MBR_SIGNATURE_FIRST) ||
-	    (mbr_sector[PARTITION_BLOCK_SIZE - 1] != MBR_SIGNATURE_SECOND)) {
+	if ((mbr_sector[LEGACY_PARTITION_BLOCK_SIZE - 2] != MBR_SIGNATURE_FIRST) ||
+	    (mbr_sector[LEGACY_PARTITION_BLOCK_SIZE - 1] != MBR_SIGNATURE_SECOND)) {
 		return -ENOENT;
 	}
 	offset = (uintptr_t)&mbr_sector + MBR_PRIMARY_ENTRY_OFFSET;
@@ -120,15 +120,15 @@
 		return result;
 	}
 	result = io_read(image_handle, (uintptr_t)&mbr_sector,
-			 PARTITION_BLOCK_SIZE, &bytes_read);
+			 PLAT_PARTITION_BLOCK_SIZE, &bytes_read);
 	if (result != 0) {
 		WARN("Failed to read data (%i)\n", result);
 		return result;
 	}
 
 	/* Check MBR boot signature. */
-	if ((mbr_sector[PARTITION_BLOCK_SIZE - 2] != MBR_SIGNATURE_FIRST) ||
-	    (mbr_sector[PARTITION_BLOCK_SIZE - 1] != MBR_SIGNATURE_SECOND)) {
+	if ((mbr_sector[LEGACY_PARTITION_BLOCK_SIZE - 2] != MBR_SIGNATURE_FIRST) ||
+	    (mbr_sector[LEGACY_PARTITION_BLOCK_SIZE - 1] != MBR_SIGNATURE_SECOND)) {
 		return -ENOENT;
 	}
 	offset = (uintptr_t)&mbr_sector +
diff --git a/drivers/rpi3/mailbox/rpi3_mbox.c b/drivers/rpi3/mailbox/rpi3_mbox.c
new file mode 100644
index 0000000..aef1f39
--- /dev/null
+++ b/drivers/rpi3/mailbox/rpi3_mbox.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <rpi_hw.h>
+
+#include <drivers/rpi3/mailbox/rpi3_mbox.h>
+
+#define RPI3_MAILBOX_MAX_RETRIES	U(1000000)
+
+/*******************************************************************************
+ * Routine to send requests to the VideoCore using the mailboxes.
+ ******************************************************************************/
+void rpi3_vc_mailbox_request_send(rpi3_mbox_request_t *req, int req_size)
+{
+	uint32_t st, data;
+	uintptr_t resp_addr, addr;
+	unsigned int retries;
+
+	/* This is the location of the request buffer */
+	addr = (uintptr_t)req;
+
+	/* Make sure that the changes are seen by the VideoCore */
+	flush_dcache_range(addr, req_size);
+
+	/* Wait until the outbound mailbox is empty */
+	retries = 0U;
+
+	do {
+		st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX1_STATUS_OFFSET);
+
+		retries++;
+		if (retries == RPI3_MAILBOX_MAX_RETRIES) {
+			ERROR("rpi3: mbox: Send request timeout\n");
+			return;
+		}
+
+	} while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) == 0U);
+
+	/* Send base address of this message to start request */
+	mmio_write_32(RPI3_MBOX_BASE + RPI3_MBOX1_WRITE_OFFSET,
+		      RPI3_CHANNEL_ARM_TO_VC | (uint32_t) addr);
+
+	/* Wait until the inbound mailbox isn't empty */
+	retries = 0U;
+
+	do {
+		st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_STATUS_OFFSET);
+
+		retries++;
+		if (retries == RPI3_MAILBOX_MAX_RETRIES) {
+			ERROR("rpi3: mbox: Receive response timeout\n");
+			return;
+		}
+
+	} while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) != 0U);
+
+	/* Get location and channel */
+	data = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_READ_OFFSET);
+
+	if ((data & RPI3_CHANNEL_MASK) != RPI3_CHANNEL_ARM_TO_VC) {
+		ERROR("rpi3: mbox: Wrong channel: 0x%08x\n", data);
+		panic();
+	}
+
+	resp_addr = (uintptr_t)(data & ~RPI3_CHANNEL_MASK);
+	if (addr != resp_addr) {
+		ERROR("rpi3: mbox: Unexpected address: 0x%08x\n", data);
+		panic();
+	}
+
+	/* Make sure that the data seen by the CPU is up to date */
+	inv_dcache_range(addr, req_size);
+}
diff --git a/plat/rpi3/rpi3_rng.c b/drivers/rpi3/rng/rpi3_rng.c
similarity index 98%
rename from plat/rpi3/rpi3_rng.c
rename to drivers/rpi3/rng/rpi3_rng.c
index fd69adb..b6bf005 100644
--- a/plat/rpi3/rpi3_rng.c
+++ b/drivers/rpi3/rng/rpi3_rng.c
@@ -9,7 +9,7 @@
 
 #include <lib/mmio.h>
 
-#include "rpi3_hw.h"
+#include <rpi_hw.h>
 
 /* Initial amount of values to discard */
 #define RNG_WARMUP_COUNT	U(0x40000)
diff --git a/drivers/st/bsec/bsec.c b/drivers/st/bsec/bsec.c
index b3c15ee..01c369e 100644
--- a/drivers/st/bsec/bsec.c
+++ b/drivers/st/bsec/bsec.c
@@ -841,22 +841,6 @@
 }
 
 /*
- * bsec_mode_is_closed_device: read OTP secure sub-mode.
- * return: false if open_device and true of closed_device.
- */
-bool bsec_mode_is_closed_device(void)
-{
-	uint32_t value;
-
-	if ((bsec_shadow_register(DATA0_OTP) != BSEC_OK) ||
-	    (bsec_read_otp(&value, DATA0_OTP) != BSEC_OK)) {
-		return true;
-	}
-
-	return (value & DATA0_OTP_SECURED) == DATA0_OTP_SECURED;
-}
-
-/*
  * bsec_shadow_read_otp: Load OTP from SAFMEM and provide its value
  * otp_value: read value.
  * word: OTP number.
@@ -894,7 +878,7 @@
 
 	if (otp >= STM32MP1_UPPER_OTP_START) {
 		/* Check if BSEC is in OTP-SECURED closed_device state. */
-		if (bsec_mode_is_closed_device()) {
+		if (stm32mp_is_closed_device()) {
 			if (!non_secure_can_access(otp)) {
 				return BSEC_ERROR;
 			}
diff --git a/drivers/st/crypto/stm32_hash.c b/drivers/st/crypto/stm32_hash.c
new file mode 100644
index 0000000..f72787d
--- /dev/null
+++ b/drivers/st/crypto/stm32_hash.c
@@ -0,0 +1,330 @@
+/*
+ * Copyright (c) 2019, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <stdint.h>
+
+#include <libfdt.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <drivers/st/stm32_hash.h>
+#include <drivers/st/stm32mp_reset.h>
+#include <lib/mmio.h>
+#include <lib/utils.h>
+#include <plat/common/platform.h>
+
+#define DT_HASH_COMPAT			"st,stm32f756-hash"
+
+#define HASH_CR				0x00U
+#define HASH_DIN			0x04U
+#define HASH_STR			0x08U
+#define HASH_SR				0x24U
+#define HASH_HREG(x)			(0x310U + ((x) * 0x04U))
+
+/* Control Register */
+#define HASH_CR_INIT			BIT(2)
+#define HASH_CR_DATATYPE_SHIFT		U(4)
+
+#define HASH_CR_ALGO_SHA1		0x0U
+#define HASH_CR_ALGO_MD5		BIT(7)
+#define HASH_CR_ALGO_SHA224		BIT(18)
+#define HASH_CR_ALGO_SHA256		(BIT(18) | BIT(7))
+
+/* Status Flags */
+#define HASH_SR_DCIS			BIT(1)
+#define HASH_SR_BUSY			BIT(3)
+
+/* STR Register */
+#define HASH_STR_NBLW_MASK		GENMASK(4, 0)
+#define HASH_STR_DCAL			BIT(8)
+
+#define MD5_DIGEST_SIZE			16U
+#define SHA1_DIGEST_SIZE		20U
+#define SHA224_DIGEST_SIZE		28U
+#define SHA256_DIGEST_SIZE		32U
+
+#define HASH_TIMEOUT_US			10000U
+
+enum stm32_hash_data_format {
+	HASH_DATA_32_BITS,
+	HASH_DATA_16_BITS,
+	HASH_DATA_8_BITS,
+	HASH_DATA_1_BIT
+};
+
+struct stm32_hash_instance {
+	uintptr_t base;
+	unsigned int clock;
+	size_t digest_size;
+};
+
+struct stm32_hash_remain {
+	uint32_t buffer;
+	size_t length;
+};
+
+/* Expect a single HASH peripheral */
+static struct stm32_hash_instance stm32_hash;
+static struct stm32_hash_remain stm32_remain;
+
+static uintptr_t hash_base(void)
+{
+	return stm32_hash.base;
+}
+
+static int hash_wait_busy(void)
+{
+	uint64_t timeout = timeout_init_us(HASH_TIMEOUT_US);
+
+	while ((mmio_read_32(hash_base() + HASH_SR) & HASH_SR_BUSY) != 0U) {
+		if (timeout_elapsed(timeout)) {
+			ERROR("%s: busy timeout\n", __func__);
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+static int hash_wait_computation(void)
+{
+	uint64_t timeout = timeout_init_us(HASH_TIMEOUT_US);
+
+	while ((mmio_read_32(hash_base() + HASH_SR) & HASH_SR_DCIS) == 0U) {
+		if (timeout_elapsed(timeout)) {
+			ERROR("%s: busy timeout\n", __func__);
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+static int hash_write_data(uint32_t data)
+{
+	int ret;
+
+	ret = hash_wait_busy();
+	if (ret != 0) {
+		return ret;
+	}
+
+	mmio_write_32(hash_base() + HASH_DIN, data);
+
+	return 0;
+}
+
+static void hash_hw_init(enum stm32_hash_algo_mode mode)
+{
+	uint32_t reg;
+
+	reg = HASH_CR_INIT | (HASH_DATA_8_BITS << HASH_CR_DATATYPE_SHIFT);
+
+	switch (mode) {
+	case HASH_MD5SUM:
+		reg |= HASH_CR_ALGO_MD5;
+		stm32_hash.digest_size = MD5_DIGEST_SIZE;
+		break;
+	case HASH_SHA1:
+		reg |= HASH_CR_ALGO_SHA1;
+		stm32_hash.digest_size = SHA1_DIGEST_SIZE;
+		break;
+	case HASH_SHA224:
+		reg |= HASH_CR_ALGO_SHA224;
+		stm32_hash.digest_size = SHA224_DIGEST_SIZE;
+		break;
+	/* Default selected algo is SHA256 */
+	case HASH_SHA256:
+	default:
+		reg |= HASH_CR_ALGO_SHA256;
+		stm32_hash.digest_size = SHA256_DIGEST_SIZE;
+		break;
+	}
+
+	mmio_write_32(hash_base() + HASH_CR, reg);
+}
+
+static int hash_get_digest(uint8_t *digest)
+{
+	int ret;
+	uint32_t i;
+	uint32_t dsg;
+
+	ret = hash_wait_computation();
+	if (ret != 0) {
+		return ret;
+	}
+
+	for (i = 0U; i < (stm32_hash.digest_size / sizeof(uint32_t)); i++) {
+		dsg = __builtin_bswap32(mmio_read_32(hash_base() +
+						     HASH_HREG(i)));
+		memcpy(digest + (i * sizeof(uint32_t)), &dsg, sizeof(uint32_t));
+	}
+
+#if defined(IMAGE_BL2)
+	/*
+	 * Clean hardware context as HASH could be used later
+	 * by non-secure software
+	 */
+	hash_hw_init(HASH_SHA256);
+#endif
+	return 0;
+}
+
+int stm32_hash_update(const uint8_t *buffer, size_t length)
+{
+	size_t remain_length = length;
+	int ret = 0;
+
+	if ((length == 0U) || (buffer == NULL)) {
+		return 0;
+	}
+
+	stm32mp_clk_enable(stm32_hash.clock);
+
+	if (stm32_remain.length != 0U) {
+		uint32_t copysize;
+
+		copysize = MIN((sizeof(uint32_t) - stm32_remain.length),
+			       length);
+		memcpy(((uint8_t *)&stm32_remain.buffer) + stm32_remain.length,
+		       buffer, copysize);
+		remain_length -= copysize;
+		buffer += copysize;
+		if (stm32_remain.length == sizeof(uint32_t)) {
+			ret = hash_write_data(stm32_remain.buffer);
+			if (ret != 0) {
+				goto exit;
+			}
+
+			zeromem(&stm32_remain, sizeof(stm32_remain));
+		}
+	}
+
+	while (remain_length / sizeof(uint32_t) != 0U) {
+		uint32_t tmp_buf;
+
+		memcpy(&tmp_buf, buffer, sizeof(uint32_t));
+		ret = hash_write_data(tmp_buf);
+		if (ret != 0) {
+			goto exit;
+		}
+
+		buffer += sizeof(uint32_t);
+		remain_length -= sizeof(uint32_t);
+	}
+
+	if (remain_length != 0U) {
+		assert(stm32_remain.length == 0U);
+
+		memcpy((uint8_t *)&stm32_remain.buffer, buffer, remain_length);
+		stm32_remain.length = remain_length;
+	}
+
+exit:
+	stm32mp_clk_disable(stm32_hash.clock);
+
+	return ret;
+}
+
+int stm32_hash_final(uint8_t *digest)
+{
+	int ret;
+
+	stm32mp_clk_enable(stm32_hash.clock);
+
+	if (stm32_remain.length != 0U) {
+		ret = hash_write_data(stm32_remain.buffer);
+		if (ret != 0) {
+			stm32mp_clk_disable(stm32_hash.clock);
+			return ret;
+		}
+
+		mmio_clrsetbits_32(hash_base() + HASH_STR, HASH_STR_NBLW_MASK,
+				   8U * stm32_remain.length);
+		zeromem(&stm32_remain, sizeof(stm32_remain));
+	}
+
+	mmio_setbits_32(hash_base() + HASH_STR, HASH_STR_DCAL);
+
+	ret = hash_get_digest(digest);
+
+	stm32mp_clk_disable(stm32_hash.clock);
+
+	return ret;
+}
+
+int stm32_hash_final_update(const uint8_t *buffer, uint32_t length,
+			    uint8_t *digest)
+{
+	int ret;
+
+	ret = stm32_hash_update(buffer, length);
+	if (ret != 0) {
+		return ret;
+	}
+
+	return stm32_hash_final(digest);
+}
+
+void stm32_hash_init(enum stm32_hash_algo_mode mode)
+{
+	stm32mp_clk_enable(stm32_hash.clock);
+
+	hash_hw_init(mode);
+
+	stm32mp_clk_disable(stm32_hash.clock);
+
+	zeromem(&stm32_remain, sizeof(stm32_remain));
+}
+
+int stm32_hash_register(void)
+{
+	struct dt_node_info hash_info;
+	int node;
+
+	for (node = dt_get_node(&hash_info, -1, DT_HASH_COMPAT);
+	     node != -FDT_ERR_NOTFOUND;
+	     node = dt_get_node(&hash_info, node, DT_HASH_COMPAT)) {
+#if defined(IMAGE_BL2)
+		if (hash_info.status != DT_DISABLED) {
+			break;
+		}
+#else
+		if (hash_info.status == DT_SECURE) {
+			break;
+		}
+#endif
+	}
+
+	if (node == -FDT_ERR_NOTFOUND) {
+		return -ENODEV;
+	}
+
+	if (hash_info.clock < 0) {
+		return -EINVAL;
+	}
+
+	stm32_hash.base = hash_info.base;
+	stm32_hash.clock = hash_info.clock;
+
+	stm32mp_clk_enable(stm32_hash.clock);
+
+	if (hash_info.reset >= 0) {
+		stm32mp_reset_assert((unsigned long)hash_info.reset);
+		udelay(20);
+		stm32mp_reset_deassert((unsigned long)hash_info.reset);
+	}
+
+	stm32mp_clk_disable(stm32_hash.clock);
+
+	return 0;
+}
diff --git a/drivers/st/io/io_stm32image.c b/drivers/st/io/io_stm32image.c
index 971dcce..413521b 100644
--- a/drivers/st/io/io_stm32image.c
+++ b/drivers/st/io/io_stm32image.c
@@ -246,7 +246,7 @@
 static int stm32image_partition_read(io_entity_t *entity, uintptr_t buffer,
 				     size_t length, size_t *length_read)
 {
-	int result = 0;
+	int result;
 	uint8_t *local_buffer = (uint8_t *)buffer;
 	boot_api_image_header_t *header =
 		(boot_api_image_header_t *)first_lba_buffer;
@@ -341,6 +341,12 @@
 			header->magic = 0;
 		}
 
+		result = stm32mp_auth_image(header, buffer);
+		if (result != 0) {
+			ERROR("Authentication Failed (%i)\n", result);
+			return result;
+		}
+
 		io_close(backend_handle);
 	}
 
diff --git a/fdts/a5ds.dts b/fdts/a5ds.dts
index 8bc4adf..91212e8 100644
--- a/fdts/a5ds.dts
+++ b/fdts/a5ds.dts
@@ -12,14 +12,40 @@
 	interrupt-parent = <&gic>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_on = <0x84000003>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
+			enable-method = "psci";
 			reg = <0>;
 		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			enable-method = "psci";
+			reg = <1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			enable-method = "psci";
+			reg = <2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			enable-method = "psci";
+			reg = <3>;
+		};
 	};
 
 	memory@80000000 {
diff --git a/fdts/stm32mp157c-security.dtsi b/fdts/stm32mp157c-security.dtsi
index f7e55b3..165ffa0 100644
--- a/fdts/stm32mp157c-security.dtsi
+++ b/fdts/stm32mp157c-security.dtsi
@@ -28,6 +28,10 @@
 	};
 };
 
+&hash1 {
+	secure-status = "okay";
+};
+
 &sdmmc1 {
 	compatible = "st,stm32-sdmmc2";
 };
diff --git a/include/arch/aarch32/arch.h b/include/arch/aarch32/arch.h
index 34036d7..2017548 100644
--- a/include/arch/aarch32/arch.h
+++ b/include/arch/aarch32/arch.h
@@ -162,6 +162,7 @@
 #define SDCR_SPD_DISABLE	U(0x2)
 #define SDCR_SPD_ENABLE		U(0x3)
 #define SDCR_SCCD_BIT		(U(1) << 23)
+#define SDCR_SPME_BIT		(U(1) << 17)
 #define SDCR_RESET_VAL		U(0x0)
 
 /* HSCTLR definitions */
@@ -243,6 +244,8 @@
 #define VTTBR_BADDR_SHIFT	U(0)
 
 /* HDCR definitions */
+#define HDCR_HLP_BIT		(U(1) << 26)
+#define HDCR_HPME_BIT		(U(1) << 7)
 #define HDCR_RESET_VAL		U(0x0)
 
 /* HSTR definitions */
@@ -419,8 +422,10 @@
 #define PMCR_N_SHIFT		U(11)
 #define PMCR_N_MASK		U(0x1f)
 #define PMCR_N_BITS		(PMCR_N_MASK << PMCR_N_SHIFT)
+#define PMCR_LP_BIT		(U(1) << 7)
 #define PMCR_LC_BIT		(U(1) << 6)
 #define PMCR_DP_BIT		(U(1) << 5)
+#define	PMCR_RESET_VAL		U(0x0)
 
 /*******************************************************************************
  * Definitions of register offsets, fields and macros for CPU system
diff --git a/include/arch/aarch32/el3_common_macros.S b/include/arch/aarch32/el3_common_macros.S
index 0bd8978..c62d7d7 100644
--- a/include/arch/aarch32/el3_common_macros.S
+++ b/include/arch/aarch32/el3_common_macros.S
@@ -112,15 +112,41 @@
 	 * SDCR.SPD: Disable AArch32 privileged debug. Debug exceptions from
 	 *  Secure EL1 are disabled.
 	 *
-	 * SDCR: Set to one so that cycle counting by PMCCNTR is prohibited in
-	 *  Secure state. This bit is RES0 in versions of the architecture
+	 * SDCR.SCCD: Set to one so that cycle counting by PMCCNTR is prohibited
+	 *  in Secure state. This bit is RES0 in versions of the architecture
 	 *  earlier than ARMv8.5, setting it to 1 doesn't have any effect on
 	 *  them.
 	 * ---------------------------------------------------------------------
 	 */
 	ldr	r0, =(SDCR_RESET_VAL | SDCR_SPD(SDCR_SPD_DISABLE) | SDCR_SCCD_BIT)
 	stcopr	r0, SDCR
+
+	/* ---------------------------------------------------------------------
+	 * Initialise PMCR, setting all fields rather than relying
+	 * on hw. Some fields are architecturally UNKNOWN on reset.
+	 *
+	 * PMCR.LP: Set to one so that event counter overflow, that
+	 *  is recorded in PMOVSCLR[0-30], occurs on the increment
+	 *  that changes PMEVCNTR<n>[63] from 1 to 0, when ARMv8.5-PMU
+	 *  is implemented. This bit is RES0 in versions of the architecture
+	 *  earlier than ARMv8.5, setting it to 1 doesn't have any effect
+	 *  on them.
+	 *  This bit is Reserved, UNK/SBZP in ARMv7.
+	 *
+	 * PMCR.LC: Set to one so that cycle counter overflow, that
+	 *  is recorded in PMOVSCLR[31], occurs on the increment
+	 *  that changes PMCCNTR[63] from 1 to 0.
+	 *  This bit is Reserved, UNK/SBZP in ARMv7.
+	 *
+	 * PMCR.DP: Set to one to prohibit cycle counting whilst in Secure mode.
+	 * ---------------------------------------------------------------------
+	 */
+	ldr	r0, =(PMCR_RESET_VAL | PMCR_DP_BIT | PMCR_LC_BIT | \
+		      PMCR_LP_BIT)
+#else
+	ldr	r0, =(PMCR_RESET_VAL | PMCR_DP_BIT)
 #endif
+	stcopr	r0, PMCR
 
 	/*
 	 * If Data Independent Timing (DIT) functionality is implemented,
diff --git a/include/arch/aarch32/smccc_macros.S b/include/arch/aarch32/smccc_macros.S
index 1fe6c64..4ec2292 100644
--- a/include/arch/aarch32/smccc_macros.S
+++ b/include/arch/aarch32/smccc_macros.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -58,7 +58,6 @@
 	stm	r0!, {r2}
 
 	stcopr	r4, SCR
-	isb
 #else
 	/* Save the banked registers including the current SPSR and LR */
 	mrs	r4, sp_usr
@@ -85,10 +84,34 @@
 	/* lr_mon is already saved by caller */
 
 	ldcopr	r4, SCR
+
+#if ARM_ARCH_MAJOR > 7
+	/*
+	 * Check if earlier initialization of SDCR.SCCD to 1
+	 * failed, meaning that ARMv8-PMU is not implemented,
+	 * cycle counting is not disabled and PMCR should be
+	 * saved in Non-secure context.
+	 */
+	ldcopr	r5, SDCR
+	tst	r5, #SDCR_SCCD_BIT
+	bne	1f
 #endif
-	str	r4, [sp, #SMC_CTX_SCR]
-	ldcopr	r4, PMCR
-	str	r4, [sp, #SMC_CTX_PMCR]
+	/* Secure Cycle Counter is not disabled */
+#endif
+	ldcopr	r5, PMCR
+
+	/* Check caller's security state */
+	tst	r4, #SCR_NS_BIT
+	beq	2f
+
+	/* Save PMCR if called from Non-secure state */
+	str	r5, [sp, #SMC_CTX_PMCR]
+
+	/* Disable cycle counter when event counting is prohibited */
+2:	orr	r5, r5, #PMCR_DP_BIT
+	stcopr	r5, PMCR
+	isb
+1:	str	r4, [sp, #SMC_CTX_SCR]
 	.endm
 
 /*
@@ -114,11 +137,30 @@
 	isb
 
 	/*
+	 * Restore PMCR when returning to Non-secure state
+	 */
+	tst	r1, #SCR_NS_BIT
+	beq	2f
+
+	/*
+	 * Back to Non-secure state
+	 */
+#if ARM_ARCH_MAJOR > 7
+	/*
+	 * Check if earlier initialization SDCR.SCCD to 1
+	 * failed, meaning that ARMv8-PMU is not implemented and
+	 * PMCR should be restored from Non-secure context.
+	 */
+	ldcopr	r1, SDCR
+	tst	r1, #SDCR_SCCD_BIT
+	bne	2f
+#endif
+	/*
 	 * Restore the PMCR register.
 	 */
 	ldr	r1, [r0, #SMC_CTX_PMCR]
 	stcopr	r1, PMCR
-
+2:
 	/* Restore the banked registers including the current SPSR */
 	add	r1, r0, #SMC_CTX_SP_USR
 
diff --git a/include/common/fdt_fixup.h b/include/common/fdt_fixup.h
new file mode 100644
index 0000000..0248de9
--- /dev/null
+++ b/include/common/fdt_fixup.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FDT_FIXUP_H
+#define FDT_FIXUP_H
+
+int dt_add_psci_node(void *fdt);
+int dt_add_psci_cpu_enable_methods(void *fdt);
+int fdt_add_reserved_memory(void *dtb, const char *node_name,
+			    uintptr_t base, size_t size);
+
+#endif /* FDT_FIXUP_H */
diff --git a/include/drivers/arm/gicv3.h b/include/drivers/arm/gicv3.h
index 9c72d4d..c4f42d0 100644
--- a/include/drivers/arm/gicv3.h
+++ b/include/drivers/arm/gicv3.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -366,6 +366,7 @@
  * GICv3 EL3 driver API
  ******************************************************************************/
 void gicv3_driver_init(const gicv3_driver_data_t *plat_driver_data);
+int gicv3_rdistif_probe(const uintptr_t gicr_frame);
 void gicv3_distif_init(void);
 void gicv3_rdistif_init(unsigned int proc_num);
 void gicv3_rdistif_on(unsigned int proc_num);
diff --git a/include/drivers/partition/gpt.h b/include/drivers/partition/gpt.h
index 3ae160f..d923e95 100644
--- a/include/drivers/partition/gpt.h
+++ b/include/drivers/partition/gpt.h
@@ -10,9 +10,9 @@
 #include <drivers/partition/partition.h>
 
 #define PARTITION_TYPE_GPT		0xee
-#define GPT_HEADER_OFFSET		PARTITION_BLOCK_SIZE
+#define GPT_HEADER_OFFSET		PLAT_PARTITION_BLOCK_SIZE
 #define GPT_ENTRY_OFFSET		(GPT_HEADER_OFFSET +		\
-					 PARTITION_BLOCK_SIZE)
+					 PLAT_PARTITION_BLOCK_SIZE)
 #define GUID_LEN			16
 
 #define GPT_SIGNATURE			"EFI PART"
diff --git a/include/drivers/partition/partition.h b/include/drivers/partition/partition.h
index d94c782..5f64833 100644
--- a/include/drivers/partition/partition.h
+++ b/include/drivers/partition/partition.h
@@ -17,7 +17,15 @@
 
 CASSERT(PLAT_PARTITION_MAX_ENTRIES <= 128, assert_plat_partition_max_entries);
 
-#define PARTITION_BLOCK_SIZE		512
+#if !PLAT_PARTITION_BLOCK_SIZE
+# define PLAT_PARTITION_BLOCK_SIZE	512
+#endif /* PLAT_PARTITION_BLOCK_SIZE */
+
+CASSERT((PLAT_PARTITION_BLOCK_SIZE == 512) ||
+	(PLAT_PARTITION_BLOCK_SIZE == 4096),
+	assert_plat_partition_block_size);
+
+#define LEGACY_PARTITION_BLOCK_SIZE	512
 
 #define EFI_NAMELEN			36
 
diff --git a/include/drivers/rpi3/mailbox/rpi3_mbox.h b/include/drivers/rpi3/mailbox/rpi3_mbox.h
new file mode 100644
index 0000000..c107440
--- /dev/null
+++ b/include/drivers/rpi3/mailbox/rpi3_mbox.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2019, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RPI3_MBOX_H
+#define RPI3_MBOX_H
+
+#include <stdint.h>
+
+/* This struct must be aligned to 16 bytes */
+typedef struct __packed __aligned(16) rpi3_mbox_request {
+	uint32_t	size; /* Buffer size in bytes */
+	uint32_t	code; /* Request/response code */
+	uint32_t	tags[0];
+} rpi3_mbox_request_t;
+
+#define RPI3_MBOX_BUFFER_SIZE		U(256)
+
+/* Constants to perform a request/check the status of a request. */
+#define RPI3_MBOX_PROCESS_REQUEST	U(0x00000000)
+#define RPI3_MBOX_REQUEST_SUCCESSFUL	U(0x80000000)
+#define RPI3_MBOX_REQUEST_ERROR		U(0x80000001)
+
+/* Command constants */
+#define RPI3_TAG_HARDWARE_GET_BOARD_REVISION	U(0x00010002)
+#define RPI3_TAG_END				U(0x00000000)
+
+#define RPI3_TAG_REQUEST		U(0x00000000)
+#define RPI3_TAG_IS_RESPONSE		U(0x80000000) /* Set if response */
+#define RPI3_TAG_RESPONSE_LENGTH_MASK	U(0x7FFFFFFF)
+
+#define RPI3_CHANNEL_ARM_TO_VC		U(0x8)
+#define RPI3_CHANNEL_MASK		U(0xF)
+
+void rpi3_vc_mailbox_request_send(rpi3_mbox_request_t *req, int req_size);
+
+#endif
diff --git a/include/drivers/rpi3/rng/rpi3_rng.h b/include/drivers/rpi3/rng/rpi3_rng.h
new file mode 100644
index 0000000..ea5a677
--- /dev/null
+++ b/include/drivers/rpi3/rng/rpi3_rng.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (c) 2019, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RPI3_RNG_H
+#define RPI3_RNG_H
+
+void rpi3_rng_read(void *buf, size_t len);
+
+#endif
diff --git a/include/drivers/st/bsec.h b/include/drivers/st/bsec.h
index 2171550..d833e7a 100644
--- a/include/drivers/st/bsec.h
+++ b/include/drivers/st/bsec.h
@@ -199,7 +199,6 @@
 bool bsec_wr_lock(uint32_t otp);
 uint32_t bsec_otp_lock(uint32_t service, uint32_t value);
 
-bool bsec_mode_is_closed_device(void);
 uint32_t bsec_shadow_read_otp(uint32_t *otp_value, uint32_t word);
 uint32_t bsec_check_nsec_access_rights(uint32_t otp);
 
diff --git a/include/drivers/st/stm32_hash.h b/include/drivers/st/stm32_hash.h
new file mode 100644
index 0000000..969d7aa
--- /dev/null
+++ b/include/drivers/st/stm32_hash.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2019, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef STM32_HASH_H
+#define STM32_HASH_H
+
+enum stm32_hash_algo_mode {
+	HASH_MD5SUM,
+	HASH_SHA1,
+	HASH_SHA224,
+	HASH_SHA256
+};
+
+int stm32_hash_update(const uint8_t *buffer, uint32_t length);
+int stm32_hash_final(uint8_t *digest);
+int stm32_hash_final_update(const uint8_t *buffer, uint32_t buf_length,
+			    uint8_t *digest);
+void stm32_hash_init(enum stm32_hash_algo_mode mode);
+int stm32_hash_register(void);
+
+#endif /* STM32_HASH_H */
diff --git a/include/lib/psci/psci.h b/include/lib/psci/psci.h
index 04e5e3d..7f7b7e3 100644
--- a/include/lib/psci/psci.h
+++ b/include/lib/psci/psci.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -301,6 +301,8 @@
 				const psci_power_state_t *target_state);
 	void (*pwr_domain_suspend)(const psci_power_state_t *target_state);
 	void (*pwr_domain_on_finish)(const psci_power_state_t *target_state);
+	void (*pwr_domain_on_finish_late)(
+				const psci_power_state_t *target_state);
 	void (*pwr_domain_suspend_finish)(
 				const psci_power_state_t *target_state);
 	void __dead2 (*pwr_domain_pwr_down_wfi)(
diff --git a/include/plat/arm/css/common/css_pm.h b/include/plat/arm/css/common/css_pm.h
index b82ff47..93f8616 100644
--- a/include/plat/arm/css/common/css_pm.h
+++ b/include/plat/arm/css/common/css_pm.h
@@ -27,6 +27,7 @@
 
 int css_pwr_domain_on(u_register_t mpidr);
 void css_pwr_domain_on_finish(const psci_power_state_t *target_state);
+void css_pwr_domain_on_finish_late(const psci_power_state_t *target_state);
 void css_pwr_domain_off(const psci_power_state_t *target_state);
 void css_pwr_domain_suspend(const psci_power_state_t *target_state);
 void css_pwr_domain_suspend_finish(
diff --git a/lib/el3_runtime/aarch32/context_mgmt.c b/lib/el3_runtime/aarch32/context_mgmt.c
index a4702fc..73d1e35 100644
--- a/lib/el3_runtime/aarch32/context_mgmt.c
+++ b/lib/el3_runtime/aarch32/context_mgmt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -281,10 +281,28 @@
 			 *
 			 * HDCR.HPMN: Set to value of PMCR.N which is the
 			 *  architecturally-defined reset value.
+			 *
+			 * HDCR.HLP: Set to one so that event counter
+			 *  overflow, that is recorded in PMOVSCLR[0-30],
+			 *  occurs on the increment that changes
+			 *  PMEVCNTR<n>[63] from 1 to 0, when ARMv8.5-PMU is
+			 *  implemented. This bit is RES0 in versions of the
+			 *  architecture earlier than ARMv8.5, setting it to 1
+			 *  doesn't have any effect on them.
+			 *  This bit is Reserved, UNK/SBZP in ARMv7.
+			 *
+			 * HDCR.HPME: Set to zero to disable EL2 Event
+			 *  counters.
 			 */
-			write_hdcr(HDCR_RESET_VAL |
-				((read_pmcr() & PMCR_N_BITS) >> PMCR_N_SHIFT));
-
+#if (ARM_ARCH_MAJOR > 7)
+			write_hdcr((HDCR_RESET_VAL | HDCR_HLP_BIT |
+				   ((read_pmcr() & PMCR_N_BITS) >>
+				    PMCR_N_SHIFT)) & ~HDCR_HPME_BIT);
+#else
+			write_hdcr((HDCR_RESET_VAL |
+				   ((read_pmcr() & PMCR_N_BITS) >>
+				    PMCR_N_SHIFT)) & ~HDCR_HPME_BIT);
+#endif
 			/*
 			 * Set HSTR to its architectural reset value so that
 			 * access to system registers in the cproc=1111
diff --git a/lib/el3_runtime/aarch64/context_mgmt.c b/lib/el3_runtime/aarch64/context_mgmt.c
index 446d9da..d65e02d 100644
--- a/lib/el3_runtime/aarch64/context_mgmt.c
+++ b/lib/el3_runtime/aarch64/context_mgmt.c
@@ -69,7 +69,7 @@
 	uint32_t scr_el3;
 	el3_state_t *state;
 	gp_regs_t *gp_regs;
-	unsigned long sctlr_elx, actlr_elx;
+	u_register_t sctlr_elx, actlr_elx;
 
 	assert(ctx != NULL);
 
@@ -142,11 +142,11 @@
 	 * world, and only for the secure world when CTX_INCLUDE_MTE_REGS is
 	 * set.
 	 */
-	unsigned int mte = get_armv8_5_mte_support();
 #if CTX_INCLUDE_MTE_REGS
-	assert(mte == MTE_IMPLEMENTED_ELX);
+	assert(get_armv8_5_mte_support() == MTE_IMPLEMENTED_ELX);
 	scr_el3 |= SCR_ATA_BIT;
 #else
+	unsigned int mte = get_armv8_5_mte_support();
 	if (mte == MTE_IMPLEMENTED_EL0) {
 		/*
 		 * Can enable MTE across both worlds as no MTE registers are
diff --git a/lib/psci/psci_on.c b/lib/psci/psci_on.c
index aa6b324..470b4f3 100644
--- a/lib/psci/psci_on.c
+++ b/lib/psci/psci_on.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -182,6 +182,14 @@
 #endif
 
 	/*
+	 * Plat. management: Perform any platform specific actions which
+	 * can only be done with the cpu and the cluster guaranteed to
+	 * be coherent.
+	 */
+	if (psci_plat_pm_ops->pwr_domain_on_finish_late != NULL)
+		psci_plat_pm_ops->pwr_domain_on_finish_late(state_info);
+
+	/*
 	 * All the platform specific actions for turning this cpu
 	 * on have completed. Perform enough arch.initialization
 	 * to run in the non-secure address space.
diff --git a/plat/amlogic/common/aml_scpi.c b/plat/amlogic/common/aml_scpi.c
index 728bcd0..c8a6772 100644
--- a/plat/amlogic/common/aml_scpi.c
+++ b/plat/amlogic/common/aml_scpi.c
@@ -25,6 +25,7 @@
 
 #define SCPI_CMD_JTAG_SET_STATE		0xC0
 #define SCPI_CMD_EFUSE_READ		0xC2
+#define SCPI_CMD_CHIP_ID		0xC6
 
 #define SCPI_CMD_COPY_FW 0xd4
 #define SCPI_CMD_SET_FW_ADDR 0xd3
@@ -142,6 +143,28 @@
 	aml_mhu_secure_message_end();
 }
 
+uint32_t aml_scpi_get_chip_id(uint8_t *obuff, uint32_t osize)
+{
+	uint32_t *response;
+	size_t resp_size;
+
+	if ((osize != 16) && (osize != 12))
+		return 0;
+
+	aml_mhu_secure_message_start();
+	aml_mhu_secure_message_send(aml_scpi_cmd(SCPI_CMD_CHIP_ID, osize));
+	aml_scpi_secure_message_receive((void *)&response, &resp_size);
+	aml_mhu_secure_message_end();
+
+	if (!((resp_size == 16) && (osize == 16)) &&
+	    !((resp_size == 0) && (osize == 12)))
+		return 0;
+
+	memcpy((void *)obuff, (const void *)response, osize);
+
+	return osize;
+}
+
 static inline void aml_scpi_copy_scp_data(uint8_t *data, size_t len)
 {
 	void *dst = (void *)AML_MHU_SECURE_AP_TO_SCP_PAYLOAD;
diff --git a/plat/amlogic/common/aml_sip_svc.c b/plat/amlogic/common/aml_sip_svc.c
index 8a9b070..ab4c015 100644
--- a/plat/amlogic/common/aml_sip_svc.c
+++ b/plat/amlogic/common/aml_sip_svc.c
@@ -9,9 +9,39 @@
 #include <lib/mmio.h>
 #include <platform_def.h>
 #include <stdint.h>
+#include <string.h>
 
 #include "aml_private.h"
 
+struct aml_cpu_info {
+	uint32_t version;
+	uint8_t chip_id[16];
+};
+
+static int aml_sip_get_chip_id(uint64_t version)
+{
+	struct aml_cpu_info *info = (void *)AML_SHARE_MEM_OUTPUT_BASE;
+	uint32_t size;
+
+	if (version > 2)
+		return -1;
+
+	memset(info, 0, sizeof(struct aml_cpu_info));
+
+	if (version == 2) {
+		info->version = 2;
+		size = 16;
+	} else {
+		info->version = 1;
+		size = 12;
+	}
+
+	if (aml_scpi_get_chip_id(info->chip_id, size) == 0)
+		return -1;
+
+	return 0;
+}
+
 /*******************************************************************************
  * This function is responsible for handling all SiP calls
  ******************************************************************************/
@@ -47,6 +77,9 @@
 		aml_scpi_jtag_set_state(AML_JTAG_STATE_OFF, x1);
 		SMC_RET1(handle, 0);
 
+	case AML_SM_GET_CHIP_ID:
+		SMC_RET1(handle, aml_sip_get_chip_id(x1));
+
 	default:
 		ERROR("BL31: Unhandled SIP SMC: 0x%08x\n", smc_fid);
 		break;
diff --git a/plat/amlogic/common/include/aml_private.h b/plat/amlogic/common/include/aml_private.h
index 4923745..724f382 100644
--- a/plat/amlogic/common/include/aml_private.h
+++ b/plat/amlogic/common/include/aml_private.h
@@ -31,6 +31,7 @@
 void aml_scpi_unknown_thermal(uint32_t arg0, uint32_t arg1,
 			      uint32_t arg2, uint32_t arg3);
 void aml_scpi_upload_scp_fw(uintptr_t addr, size_t size, int send);
+uint32_t aml_scpi_get_chip_id(uint8_t *obuff, uint32_t osize);
 
 /* Peripherals */
 void aml_thermal_unknown(void);
diff --git a/plat/amlogic/g12a/g12a_bl31_setup.c b/plat/amlogic/g12a/g12a_bl31_setup.c
new file mode 100644
index 0000000..77057a1
--- /dev/null
+++ b/plat/amlogic/g12a/g12a_bl31_setup.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <common/bl_common.h>
+#include <common/interrupt_props.h>
+#include <drivers/arm/gicv2.h>
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_mmu_helpers.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+#include "aml_private.h"
+
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL31 from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+static image_info_t bl30_image_info;
+static image_info_t bl301_image_info;
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for
+ * the security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+	entry_point_info_t *next_image_info;
+
+	next_image_info = (type == NON_SECURE) ?
+			  &bl33_image_ep_info : &bl32_image_ep_info;
+
+	/* None of the images can have 0x0 as the entrypoint. */
+	if (next_image_info->pc != 0U)
+		return next_image_info;
+
+	return NULL;
+}
+
+/*******************************************************************************
+ * Perform any BL31 early platform setup. Here is an opportunity to copy
+ * parameters passed by the calling EL (S-EL1 in BL2 & S-EL3 in BL1) before
+ * they are lost (potentially). This needs to be done before the MMU is
+ * initialized so that the memory layout can be used while creating page
+ * tables. BL2 has flushed this information to memory, so we are guaranteed
+ * to pick up good data.
+ ******************************************************************************/
+struct g12a_bl31_param {
+	param_header_t h;
+	image_info_t *bl31_image_info;
+	entry_point_info_t *bl32_ep_info;
+	image_info_t *bl32_image_info;
+	entry_point_info_t *bl33_ep_info;
+	image_info_t *bl33_image_info;
+	image_info_t *scp_image_info[];
+};
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+				u_register_t arg2, u_register_t arg3)
+{
+	struct g12a_bl31_param *from_bl2;
+
+	/* Initialize the console to provide early debug support */
+	aml_console_init();
+
+	from_bl2 = (struct g12a_bl31_param *)arg0;
+
+	/* Check params passed from BL2 are not NULL. */
+	assert(from_bl2 != NULL);
+	assert(from_bl2->h.type == PARAM_BL31);
+	assert(from_bl2->h.version >= VERSION_1);
+
+	/*
+	 * Copy BL32 and BL33 entry point information. It is stored in Secure
+	 * RAM, in BL2's address space.
+	 */
+	bl32_image_ep_info = *from_bl2->bl32_ep_info;
+	bl33_image_ep_info = *from_bl2->bl33_ep_info;
+
+	if (bl33_image_ep_info.pc == 0U) {
+		ERROR("BL31: BL33 entrypoint not obtained from BL2\n");
+		panic();
+	}
+
+	bl30_image_info = *from_bl2->scp_image_info[0];
+	bl301_image_info = *from_bl2->scp_image_info[1];
+}
+
+void bl31_plat_arch_setup(void)
+{
+	aml_setup_page_tables();
+
+	enable_mmu_el3(0);
+}
+
+/*******************************************************************************
+ * GICv2 driver setup information
+ ******************************************************************************/
+static const interrupt_prop_t g12a_interrupt_props[] = {
+	INTR_PROP_DESC(IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY,
+		       GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL),
+	INTR_PROP_DESC(IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY,
+		       GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL),
+	INTR_PROP_DESC(IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY,
+		       GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL),
+	INTR_PROP_DESC(IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY,
+		       GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL),
+	INTR_PROP_DESC(IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY,
+		       GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL),
+	INTR_PROP_DESC(IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY,
+		       GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL),
+	INTR_PROP_DESC(IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY,
+		       GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL),
+	INTR_PROP_DESC(IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY,
+		       GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL),
+	INTR_PROP_DESC(IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY,
+		       GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL)
+};
+
+static const gicv2_driver_data_t g12a_gic_data = {
+	.gicd_base = AML_GICD_BASE,
+	.gicc_base = AML_GICC_BASE,
+	.interrupt_props = g12a_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(g12a_interrupt_props)
+};
+
+void bl31_platform_setup(void)
+{
+	aml_mhu_secure_init();
+
+	gicv2_driver_init(&g12a_gic_data);
+	gicv2_distif_init();
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+}
diff --git a/plat/amlogic/g12a/g12a_common.c b/plat/amlogic/g12a/g12a_common.c
new file mode 100644
index 0000000..e74ed04
--- /dev/null
+++ b/plat/amlogic/g12a/g12a_common.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <bl31/interrupt_mgmt.h>
+#include <common/bl_common.h>
+#include <common/ep_info.h>
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <platform_def.h>
+#include <stdint.h>
+
+/*******************************************************************************
+ * Platform memory map regions
+ ******************************************************************************/
+#define MAP_NSDRAM0		MAP_REGION_FLAT(AML_NSDRAM0_BASE,		\
+						AML_NSDRAM0_SIZE,		\
+						MT_MEMORY | MT_RW | MT_NS)
+
+#define MAP_NS_SHARE_MEM	MAP_REGION_FLAT(AML_NS_SHARE_MEM_BASE,		\
+						AML_NS_SHARE_MEM_SIZE,		\
+						MT_MEMORY | MT_RW | MT_NS)
+
+#define MAP_SEC_SHARE_MEM	MAP_REGION_FLAT(AML_SEC_SHARE_MEM_BASE,		\
+						AML_SEC_SHARE_MEM_SIZE,		\
+						MT_MEMORY | MT_RW | MT_SECURE)
+
+#define MAP_SEC_DEVICE0		MAP_REGION_FLAT(AML_SEC_DEVICE0_BASE,		\
+						AML_SEC_DEVICE0_SIZE,		\
+						MT_DEVICE | MT_RW)
+
+#define MAP_HDCP_RX		MAP_REGION_FLAT(AML_HDCP_RX_BASE,		\
+						AML_HDCP_RX_SIZE,		\
+						MT_DEVICE | MT_RW | MT_SECURE)
+
+#define MAP_HDCP_TX		MAP_REGION_FLAT(AML_HDCP_TX_BASE,		\
+						AML_HDCP_TX_SIZE,		\
+						MT_DEVICE | MT_RW | MT_SECURE)
+
+#define MAP_GIC_DEVICE		MAP_REGION_FLAT(AML_GIC_DEVICE_BASE,		\
+						AML_GIC_DEVICE_SIZE,		\
+						MT_DEVICE | MT_RW | MT_SECURE)
+
+#define MAP_SEC_DEVICE1		MAP_REGION_FLAT(AML_SEC_DEVICE1_BASE,		\
+						AML_SEC_DEVICE1_SIZE,		\
+						MT_DEVICE | MT_RW | MT_SECURE)
+
+#define MAP_SEC_DEVICE2		MAP_REGION_FLAT(AML_SEC_DEVICE2_BASE,		\
+						AML_SEC_DEVICE2_SIZE,		\
+						MT_DEVICE | MT_RW | MT_SECURE)
+
+#define MAP_TZRAM		MAP_REGION_FLAT(AML_TZRAM_BASE,			\
+						AML_TZRAM_SIZE,			\
+						MT_DEVICE | MT_RW | MT_SECURE)
+
+static const mmap_region_t g12a_mmap[] = {
+	MAP_NSDRAM0,
+	MAP_NS_SHARE_MEM,
+	MAP_SEC_SHARE_MEM,
+	MAP_SEC_DEVICE0,
+	MAP_HDCP_RX,
+	MAP_HDCP_TX,
+	MAP_GIC_DEVICE,
+	MAP_SEC_DEVICE1,
+	MAP_SEC_DEVICE2,
+	MAP_TZRAM,
+	{0}
+};
+
+/*******************************************************************************
+ * Per-image regions
+ ******************************************************************************/
+#define MAP_BL31	MAP_REGION_FLAT(BL31_BASE,					\
+					BL31_END - BL31_BASE,				\
+					MT_MEMORY | MT_RW | MT_SECURE)
+
+#define MAP_BL_CODE	MAP_REGION_FLAT(BL_CODE_BASE,					\
+					BL_CODE_END - BL_CODE_BASE,			\
+					MT_CODE | MT_SECURE)
+
+#define MAP_BL_RO_DATA	MAP_REGION_FLAT(BL_RO_DATA_BASE,				\
+					BL_RO_DATA_END - BL_RO_DATA_BASE,		\
+					MT_RO_DATA | MT_SECURE)
+
+#define MAP_BL_COHERENT	MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,				\
+					BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE, 	\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+/*******************************************************************************
+ * Function that sets up the translation tables.
+ ******************************************************************************/
+void aml_setup_page_tables(void)
+{
+#if IMAGE_BL31
+	const mmap_region_t g12a_bl_mmap[] = {
+		MAP_BL31,
+		MAP_BL_CODE,
+		MAP_BL_RO_DATA,
+#if USE_COHERENT_MEM
+		MAP_BL_COHERENT,
+#endif
+		{0}
+	};
+#endif
+
+	mmap_add(g12a_bl_mmap);
+
+	mmap_add(g12a_mmap);
+
+	init_xlat_tables();
+}
+
+/*******************************************************************************
+ * Function that returns the system counter frequency
+ ******************************************************************************/
+unsigned int plat_get_syscnt_freq2(void)
+{
+	mmio_clrbits_32(AML_SYS_CPU_CFG7, ~0xFDFFFFFF);
+	mmio_clrbits_32(AML_AO_TIMESTAMP_CNTL, ~0xFFFFFE00);
+
+	return AML_OSC24M_CLK_IN_HZ;
+}
diff --git a/plat/amlogic/g12a/g12a_def.h b/plat/amlogic/g12a/g12a_def.h
new file mode 100644
index 0000000..d032815
--- /dev/null
+++ b/plat/amlogic/g12a/g12a_def.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef G12A_DEF_H
+#define G12A_DEF_H
+
+#include <lib/utils_def.h>
+
+/*******************************************************************************
+ * System oscillator
+ ******************************************************************************/
+#define AML_OSC24M_CLK_IN_HZ			ULL(24000000) /* 24 MHz */
+
+/*******************************************************************************
+ * Memory regions
+ ******************************************************************************/
+#define AML_HDCP_RX_BASE			UL(0xFFE0D000)
+#define AML_HDCP_RX_SIZE			UL(0x00002000)
+
+#define AML_HDCP_TX_BASE			UL(0xFFE01000)
+#define AML_HDCP_TX_SIZE			UL(0x00001000)
+
+#define AML_NS_SHARE_MEM_BASE			UL(0x05000000)
+#define AML_NS_SHARE_MEM_SIZE			UL(0x00100000)
+
+#define AML_SEC_SHARE_MEM_BASE			UL(0x05200000)
+#define AML_SEC_SHARE_MEM_SIZE			UL(0x00100000)
+
+#define AML_GIC_DEVICE_BASE			UL(0xFFC00000)
+#define AML_GIC_DEVICE_SIZE			UL(0x00008000)
+
+#define AML_NSDRAM0_BASE			UL(0x01000000)
+#define AML_NSDRAM0_SIZE			UL(0x0F000000)
+
+#define BL31_BASE				UL(0x05100000)
+#define BL31_SIZE				UL(0x00100000)
+#define BL31_LIMIT				(BL31_BASE + BL31_SIZE)
+
+/* Shared memory used for SMC services */
+#define AML_SHARE_MEM_INPUT_BASE		UL(0x050FE000)
+#define AML_SHARE_MEM_OUTPUT_BASE		UL(0x050FF000)
+
+#define AML_SEC_DEVICE0_BASE			UL(0xFFD00000)
+#define AML_SEC_DEVICE0_SIZE			UL(0x00026000)
+
+#define AML_SEC_DEVICE1_BASE			UL(0xFF800000)
+#define AML_SEC_DEVICE1_SIZE			UL(0x0000A000)
+
+#define AML_TZRAM_BASE				UL(0xFFFA0000)
+#define AML_TZRAM_SIZE				UL(0x00048000)
+
+/* Mailboxes */
+#define AML_MHU_SECURE_SCP_TO_AP_PAYLOAD	UL(0xFFFE7800)
+#define AML_MHU_SECURE_AP_TO_SCP_PAYLOAD	UL(0xFFFE7A00)
+#define AML_PSCI_MAILBOX_BASE			UL(0xFFFE7F00)
+
+#define AML_SEC_DEVICE2_BASE			UL(0xFF620000)
+#define AML_SEC_DEVICE2_SIZE			UL(0x00028000)
+
+/*******************************************************************************
+ * GIC-400 and interrupt handling related constants
+ ******************************************************************************/
+#define AML_GICD_BASE				UL(0xFFC01000)
+#define AML_GICC_BASE				UL(0xFFC02000)
+
+#define IRQ_SEC_PHY_TIMER			29
+
+#define IRQ_SEC_SGI_0				8
+#define IRQ_SEC_SGI_1				9
+#define IRQ_SEC_SGI_2				10
+#define IRQ_SEC_SGI_3				11
+#define IRQ_SEC_SGI_4				12
+#define IRQ_SEC_SGI_5				13
+#define IRQ_SEC_SGI_6				14
+#define IRQ_SEC_SGI_7				15
+#define IRQ_SEC_SGI_8				16
+
+/*******************************************************************************
+ * UART definitions
+ ******************************************************************************/
+#define AML_UART0_AO_BASE			UL(0xFF803000)
+#define AML_UART0_AO_CLK_IN_HZ			AML_OSC24M_CLK_IN_HZ
+#define AML_UART_BAUDRATE			U(115200)
+
+/*******************************************************************************
+ * Memory-mapped I/O Registers
+ ******************************************************************************/
+#define AML_AO_TIMESTAMP_CNTL			UL(0xFF8000B4)
+
+#define AML_SYS_CPU_CFG7			UL(0xFF634664)
+
+#define AML_AO_RTI_STATUS_REG3			UL(0xFF80001C)
+#define AML_AO_RTI_SCP_STAT			UL(0xFF80023C)
+#define AML_AO_RTI_SCP_READY_OFF		U(0x14)
+#define AML_A0_RTI_SCP_READY_MASK		U(3)
+#define AML_AO_RTI_SCP_IS_READY(v)					\
+	((((v) >> AML_AO_RTI_SCP_READY_OFF) &				\
+	AML_A0_RTI_SCP_READY_MASK) == AML_A0_RTI_SCP_READY_MASK)
+
+#define AML_HIU_MAILBOX_SET_0			UL(0xFF63C404)
+#define AML_HIU_MAILBOX_STAT_0			UL(0xFF63C408)
+#define AML_HIU_MAILBOX_CLR_0			UL(0xFF63C40C)
+#define AML_HIU_MAILBOX_SET_3			UL(0xFF63C428)
+#define AML_HIU_MAILBOX_STAT_3			UL(0xFF63C42C)
+#define AML_HIU_MAILBOX_CLR_3			UL(0xFF63C430)
+
+#define AML_SHA_DMA_BASE			UL(0xFF63E000)
+#define AML_SHA_DMA_DESC			(AML_SHA_DMA_BASE + 0x08)
+#define AML_SHA_DMA_STATUS			(AML_SHA_DMA_BASE + 0x28)
+
+/*******************************************************************************
+ * System Monitor Call IDs and arguments
+ ******************************************************************************/
+#define AML_SM_GET_SHARE_MEM_INPUT_BASE		U(0x82000020)
+#define AML_SM_GET_SHARE_MEM_OUTPUT_BASE	U(0x82000021)
+
+#define AML_SM_EFUSE_READ			U(0x82000030)
+#define AML_SM_EFUSE_USER_MAX			U(0x82000033)
+
+#define AML_SM_JTAG_ON				U(0x82000040)
+#define AML_SM_JTAG_OFF				U(0x82000041)
+#define AML_SM_GET_CHIP_ID			U(0x82000044)
+
+#define AML_JTAG_STATE_ON			U(0)
+#define AML_JTAG_STATE_OFF			U(1)
+
+#define AML_JTAG_M3_AO				U(0)
+#define AML_JTAG_M3_EE				U(1)
+#define AML_JTAG_A53_AO				U(2)
+#define AML_JTAG_A53_EE				U(3)
+
+#endif /* G12A_DEF_H */
diff --git a/plat/amlogic/g12a/g12a_pm.c b/plat/amlogic/g12a/g12a_pm.c
new file mode 100644
index 0000000..c9fe3e9
--- /dev/null
+++ b/plat/amlogic/g12a/g12a_pm.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <common/debug.h>
+#include <drivers/arm/gicv2.h>
+#include <drivers/console.h>
+#include <errno.h>
+#include <lib/mmio.h>
+#include <lib/psci/psci.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+#include "aml_private.h"
+
+#define SCPI_POWER_ON		0
+#define SCPI_POWER_RETENTION	1
+#define SCPI_POWER_OFF		3
+
+#define SCPI_SYSTEM_SHUTDOWN	0
+#define SCPI_SYSTEM_REBOOT	1
+
+static uintptr_t g12a_sec_entrypoint;
+static volatile uint32_t g12a_cpu0_go;
+
+static void g12a_pm_set_reset_addr(u_register_t mpidr, uint64_t value)
+{
+	unsigned int core = plat_calc_core_pos(mpidr);
+	uintptr_t cpu_mailbox_addr = AML_PSCI_MAILBOX_BASE + (core << 4);
+
+	mmio_write_64(cpu_mailbox_addr, value);
+}
+
+static void g12a_pm_reset(u_register_t mpidr)
+{
+	unsigned int core = plat_calc_core_pos(mpidr);
+	uintptr_t cpu_mailbox_addr = AML_PSCI_MAILBOX_BASE + (core << 4) + 8;
+
+	mmio_write_32(cpu_mailbox_addr, 0);
+}
+
+static void __dead2 g12a_system_reset(void)
+{
+	INFO("BL31: PSCI_SYSTEM_RESET\n");
+
+	u_register_t mpidr = read_mpidr_el1();
+	uint32_t status = mmio_read_32(AML_AO_RTI_STATUS_REG3);
+	int ret;
+
+	NOTICE("BL31: Reboot reason: 0x%x\n", status);
+
+	status &= 0xFFFF0FF0;
+
+	console_flush();
+
+	mmio_write_32(AML_AO_RTI_STATUS_REG3, status);
+
+	ret = aml_scpi_sys_power_state(SCPI_SYSTEM_REBOOT);
+
+	if (ret != 0) {
+		ERROR("BL31: PSCI_SYSTEM_RESET: SCP error: %i\n", ret);
+		panic();
+	}
+
+	g12a_pm_reset(mpidr);
+
+	wfi();
+
+	ERROR("BL31: PSCI_SYSTEM_RESET: Operation not handled\n");
+	panic();
+}
+
+static void __dead2 g12a_system_off(void)
+{
+	INFO("BL31: PSCI_SYSTEM_OFF\n");
+
+	u_register_t mpidr = read_mpidr_el1();
+	int ret;
+
+	ret = aml_scpi_sys_power_state(SCPI_SYSTEM_SHUTDOWN);
+
+	if (ret != 0) {
+		ERROR("BL31: PSCI_SYSTEM_OFF: SCP error %i\n", ret);
+		panic();
+	}
+
+	g12a_pm_set_reset_addr(mpidr, 0);
+	g12a_pm_reset(mpidr);
+
+	wfi();
+
+	ERROR("BL31: PSCI_SYSTEM_OFF: Operation not handled\n");
+	panic();
+}
+
+static int32_t g12a_pwr_domain_on(u_register_t mpidr)
+{
+	unsigned int core = plat_calc_core_pos(mpidr);
+
+	/* CPU0 can't be turned OFF */
+	if (core == AML_PRIMARY_CPU) {
+		VERBOSE("BL31: Releasing CPU0 from wait loop...\n");
+
+		g12a_cpu0_go = 1;
+		flush_dcache_range((uintptr_t)&g12a_cpu0_go,
+				sizeof(g12a_cpu0_go));
+		dsb();
+		isb();
+
+		sev();
+
+		return PSCI_E_SUCCESS;
+	}
+
+	g12a_pm_set_reset_addr(mpidr, g12a_sec_entrypoint);
+	aml_scpi_set_css_power_state(mpidr,
+				     SCPI_POWER_ON, SCPI_POWER_ON, SCPI_POWER_ON);
+	dmbsy();
+	sev();
+
+	return PSCI_E_SUCCESS;
+}
+
+static void g12a_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	unsigned int core = plat_calc_core_pos(read_mpidr_el1());
+
+	assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] ==
+					PLAT_LOCAL_STATE_OFF);
+
+	if (core == AML_PRIMARY_CPU) {
+		g12a_cpu0_go = 0;
+		flush_dcache_range((uintptr_t)&g12a_cpu0_go,
+				sizeof(g12a_cpu0_go));
+		dsb();
+		isb();
+	}
+
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+}
+
+static void g12a_pwr_domain_off(const psci_power_state_t *target_state)
+{
+	u_register_t mpidr = read_mpidr_el1();
+	unsigned int core = plat_calc_core_pos(mpidr);
+
+	gicv2_cpuif_disable();
+
+	/* CPU0 can't be turned OFF */
+	if (core == AML_PRIMARY_CPU)
+		return;
+
+	aml_scpi_set_css_power_state(mpidr,
+				     SCPI_POWER_OFF, SCPI_POWER_ON,
+				     SCPI_POWER_ON);
+}
+
+static void __dead2 g12a_pwr_domain_pwr_down_wfi(const psci_power_state_t
+						 *target_state)
+{
+	u_register_t mpidr = read_mpidr_el1();
+	unsigned int core = plat_calc_core_pos(mpidr);
+
+	/* CPU0 can't be turned OFF, emulate it with a WFE loop */
+	if (core == AML_PRIMARY_CPU) {
+		VERBOSE("BL31: CPU0 entering wait loop...\n");
+
+		while (g12a_cpu0_go == 0)
+			wfe();
+
+		VERBOSE("BL31: CPU0 resumed.\n");
+
+		/*
+		 * Because setting CPU0's warm reset entrypoint through PSCI
+		 * mailbox and/or mmio mapped RVBAR (0xda834650) does not seem
+		 * to work, jump to it manually.
+		 * In order to avoid an assert, MMU has to be disabled.
+		 */
+		disable_mmu_el3();
+		((void(*)(void))g12a_sec_entrypoint)();
+	}
+
+	dsbsy();
+	g12a_pm_set_reset_addr(mpidr, 0);
+	g12a_pm_reset(mpidr);
+
+	for (;;)
+		wfi();
+}
+
+/*******************************************************************************
+ * Platform handlers and setup function.
+ ******************************************************************************/
+static const plat_psci_ops_t g12a_ops = {
+	.pwr_domain_on			= g12a_pwr_domain_on,
+	.pwr_domain_on_finish		= g12a_pwr_domain_on_finish,
+	.pwr_domain_off			= g12a_pwr_domain_off,
+	.pwr_domain_pwr_down_wfi	= g12a_pwr_domain_pwr_down_wfi,
+	.system_off			= g12a_system_off,
+	.system_reset			= g12a_system_reset
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+			const plat_psci_ops_t **psci_ops)
+{
+	g12a_sec_entrypoint = sec_entrypoint;
+	*psci_ops = &g12a_ops;
+	g12a_cpu0_go = 0;
+	return 0;
+}
diff --git a/plat/amlogic/g12a/include/platform_def.h b/plat/amlogic/g12a/include/platform_def.h
new file mode 100644
index 0000000..23d816d
--- /dev/null
+++ b/plat/amlogic/g12a/include/platform_def.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <arch.h>
+#include <lib/utils_def.h>
+
+#include "../g12a_def.h"
+
+#define PLATFORM_LINKER_FORMAT		"elf64-littleaarch64"
+#define PLATFORM_LINKER_ARCH		aarch64
+
+#define PLATFORM_STACK_SIZE		UL(0x1000)
+
+#define PLATFORM_MAX_CPUS_PER_CLUSTER	U(4)
+#define PLATFORM_CLUSTER_COUNT		U(1)
+#define PLATFORM_CLUSTER0_CORE_COUNT	PLATFORM_MAX_CPUS_PER_CLUSTER
+#define PLATFORM_CORE_COUNT		PLATFORM_CLUSTER0_CORE_COUNT
+
+#define AML_PRIMARY_CPU			U(0)
+
+#define PLAT_MAX_PWR_LVL		MPIDR_AFFLVL1
+#define PLAT_NUM_PWR_DOMAINS		(PLATFORM_CLUSTER_COUNT + \
+					 PLATFORM_CORE_COUNT)
+
+#define PLAT_MAX_RET_STATE		U(1)
+#define PLAT_MAX_OFF_STATE		U(2)
+
+/* Local power state for power domains in Run state. */
+#define PLAT_LOCAL_STATE_RUN		U(0)
+/* Local power state for retention. Valid only for CPU power domains */
+#define PLAT_LOCAL_STATE_RET		U(1)
+/* Local power state for power-down. Valid for CPU and cluster power domains. */
+#define PLAT_LOCAL_STATE_OFF		U(2)
+
+/*
+ * Macros used to parse state information from State-ID if it is using the
+ * recommended encoding for State-ID.
+ */
+#define PLAT_LOCAL_PSTATE_WIDTH		U(4)
+#define PLAT_LOCAL_PSTATE_MASK		((U(1) << PLAT_LOCAL_PSTATE_WIDTH) - 1)
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_SHIFT		U(6)
+#define CACHE_WRITEBACK_GRANULE		(U(1) << CACHE_WRITEBACK_SHIFT)
+
+/* Memory-related defines */
+#define PLAT_PHY_ADDR_SPACE_SIZE	(ULL(1) << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(ULL(1) << 32)
+
+#define MAX_MMAP_REGIONS		16
+#define MAX_XLAT_TABLES			8
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/amlogic/g12a/platform.mk b/plat/amlogic/g12a/platform.mk
new file mode 100644
index 0000000..b0c91b0
--- /dev/null
+++ b/plat/amlogic/g12a/platform.mk
@@ -0,0 +1,91 @@
+#
+# Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+include lib/xlat_tables_v2/xlat_tables.mk
+
+AML_PLAT		:=	plat/amlogic
+AML_PLAT_SOC		:=	${AML_PLAT}/${PLAT}
+AML_PLAT_COMMON		:=	${AML_PLAT}/common
+
+DOIMAGEPATH		?=	tools/amlogic
+DOIMAGETOOL		?=	${DOIMAGEPATH}/doimage
+
+PLAT_INCLUDES		:=	-Iinclude/drivers/amlogic/			\
+				-I${AML_PLAT_SOC}/include			\
+				-I${AML_PLAT_COMMON}/include
+
+GIC_SOURCES		:=	drivers/arm/gic/common/gic_common.c		\
+				drivers/arm/gic/v2/gicv2_main.c			\
+				drivers/arm/gic/v2/gicv2_helpers.c		\
+				plat/common/plat_gicv2.c
+
+BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a53.S			\
+				plat/common/plat_psci_common.c			\
+				drivers/amlogic/console/aarch64/meson_console.S	\
+				${AML_PLAT_SOC}/${PLAT}_bl31_setup.c		\
+				${AML_PLAT_SOC}/${PLAT}_pm.c			\
+				${AML_PLAT_SOC}/${PLAT}_common.c		\
+				${AML_PLAT_COMMON}/aarch64/aml_helpers.S	\
+				${AML_PLAT_COMMON}/aml_efuse.c			\
+				${AML_PLAT_COMMON}/aml_mhu.c			\
+				${AML_PLAT_COMMON}/aml_scpi.c			\
+				${AML_PLAT_COMMON}/aml_sip_svc.c		\
+				${AML_PLAT_COMMON}/aml_thermal.c		\
+				${AML_PLAT_COMMON}/aml_topology.c		\
+				${AML_PLAT_COMMON}/aml_console.c		\
+				drivers/amlogic/crypto/sha_dma.c		\
+				${XLAT_TABLES_LIB_SRCS}				\
+				${GIC_SOURCES}
+
+# Tune compiler for Cortex-A53
+ifeq ($(notdir $(CC)),armclang)
+    TF_CFLAGS_aarch64	+=	-mcpu=cortex-a53
+else ifneq ($(findstring clang,$(notdir $(CC))),)
+    TF_CFLAGS_aarch64	+=	-mcpu=cortex-a53
+else
+    TF_CFLAGS_aarch64	+=	-mtune=cortex-a53
+endif
+
+# Build config flags
+# ------------------
+
+# Enable all errata workarounds for Cortex-A53
+ERRATA_A53_855873		:= 1
+ERRATA_A53_819472		:= 1
+ERRATA_A53_824069		:= 1
+ERRATA_A53_827319		:= 1
+
+WORKAROUND_CVE_2017_5715	:= 0
+
+# Have different sections for code and rodata
+SEPARATE_CODE_AND_RODATA	:= 1
+
+# Use Coherent memory
+USE_COHERENT_MEM		:= 1
+
+# Verify build config
+# -------------------
+
+ifneq (${RESET_TO_BL31}, 0)
+  $(error Error: ${PLAT} needs RESET_TO_BL31=0)
+endif
+
+ifeq (${ARCH},aarch32)
+  $(error Error: AArch32 not supported on ${PLAT})
+endif
+
+all: ${BUILD_PLAT}/bl31.img
+distclean realclean clean: cleanimage
+
+cleanimage:
+	${Q}${MAKE} -C ${DOIMAGEPATH} clean
+
+${DOIMAGETOOL}:
+	${Q}${MAKE} -C ${DOIMAGEPATH}
+
+${BUILD_PLAT}/bl31.img: ${BUILD_PLAT}/bl31.bin ${DOIMAGETOOL}
+	${DOIMAGETOOL} ${BUILD_PLAT}/bl31.bin ${BUILD_PLAT}/bl31.img
+
diff --git a/plat/amlogic/gxbb/gxbb_def.h b/plat/amlogic/gxbb/gxbb_def.h
index 2f6d1d2..fa5e4fa 100644
--- a/plat/amlogic/gxbb/gxbb_def.h
+++ b/plat/amlogic/gxbb/gxbb_def.h
@@ -95,6 +95,10 @@
 #define AML_HIU_MAILBOX_STAT_3			UL(0xDA83C42C)
 #define AML_HIU_MAILBOX_CLR_3			UL(0xDA83C430)
 
+#define AML_SHA_DMA_BASE			UL(0xC883E000)
+#define AML_SHA_DMA_DESC			(AML_SHA_DMA_BASE + 0x08)
+#define AML_SHA_DMA_STATUS			(AML_SHA_DMA_BASE + 0x18)
+
 /*******************************************************************************
  * System Monitor Call IDs and arguments
  ******************************************************************************/
@@ -106,6 +110,7 @@
 
 #define AML_SM_JTAG_ON				U(0x82000040)
 #define AML_SM_JTAG_OFF				U(0x82000041)
+#define AML_SM_GET_CHIP_ID			U(0x82000044)
 
 #define AML_JTAG_STATE_ON			U(0)
 #define AML_JTAG_STATE_OFF			U(1)
diff --git a/plat/amlogic/gxbb/platform.mk b/plat/amlogic/gxbb/platform.mk
index 57167b0..62384d2 100644
--- a/plat/amlogic/gxbb/platform.mk
+++ b/plat/amlogic/gxbb/platform.mk
@@ -22,9 +22,9 @@
 BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a53.S			\
 				plat/common/plat_psci_common.c			\
 				drivers/amlogic/console/aarch64/meson_console.S	\
-				${AML_PLAT_SOC}/gxbb_bl31_setup.c		\
-				${AML_PLAT_SOC}/gxbb_pm.c			\
-				${AML_PLAT_SOC}/gxbb_common.c			\
+				${AML_PLAT_SOC}/${PLAT}_bl31_setup.c		\
+				${AML_PLAT_SOC}/${PLAT}_pm.c			\
+				${AML_PLAT_SOC}/${PLAT}_common.c		\
 				${AML_PLAT_COMMON}/aarch64/aml_helpers.S	\
 				${AML_PLAT_COMMON}/aml_efuse.c			\
 				${AML_PLAT_COMMON}/aml_mhu.c			\
diff --git a/plat/amlogic/gxl/gxl_def.h b/plat/amlogic/gxl/gxl_def.h
index 6f49ed2..f30eb28 100644
--- a/plat/amlogic/gxl/gxl_def.h
+++ b/plat/amlogic/gxl/gxl_def.h
@@ -105,6 +105,10 @@
 #define AML_HIU_MAILBOX_STAT_3			UL(0xDA83C42C)
 #define AML_HIU_MAILBOX_CLR_3			UL(0xDA83C430)
 
+#define AML_SHA_DMA_BASE			UL(0xC883E000)
+#define AML_SHA_DMA_DESC			(AML_SHA_DMA_BASE + 0x08)
+#define AML_SHA_DMA_STATUS			(AML_SHA_DMA_BASE + 0x18)
+
 /*******************************************************************************
  * System Monitor Call IDs and arguments
  ******************************************************************************/
@@ -116,6 +120,7 @@
 
 #define AML_SM_JTAG_ON				U(0x82000040)
 #define AML_SM_JTAG_OFF				U(0x82000041)
+#define AML_SM_GET_CHIP_ID			U(0x82000044)
 
 #define AML_JTAG_STATE_ON			U(0)
 #define AML_JTAG_STATE_OFF			U(1)
diff --git a/plat/amlogic/gxl/platform.mk b/plat/amlogic/gxl/platform.mk
index 2e47670..641d177 100644
--- a/plat/amlogic/gxl/platform.mk
+++ b/plat/amlogic/gxl/platform.mk
@@ -25,9 +25,9 @@
 BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a53.S			\
 				plat/common/plat_psci_common.c			\
 				drivers/amlogic/console/aarch64/meson_console.S	\
-				${AML_PLAT_SOC}/gxl_bl31_setup.c		\
-				${AML_PLAT_SOC}/gxl_pm.c			\
-				${AML_PLAT_SOC}/gxl_common.c			\
+				${AML_PLAT_SOC}/${PLAT}_bl31_setup.c		\
+				${AML_PLAT_SOC}/${PLAT}_pm.c			\
+				${AML_PLAT_SOC}/${PLAT}_common.c		\
 				${AML_PLAT_COMMON}/aarch64/aml_helpers.S	\
 				${AML_PLAT_COMMON}/aml_efuse.c			\
 				${AML_PLAT_COMMON}/aml_mhu.c			\
diff --git a/plat/arm/board/a5ds/a5ds_pm.c b/plat/arm/board/a5ds/a5ds_pm.c
index 5fd443b..98de77d 100644
--- a/plat/arm/board/a5ds/a5ds_pm.c
+++ b/plat/arm/board/a5ds/a5ds_pm.c
@@ -6,6 +6,38 @@
 
 #include <lib/psci/psci.h>
 #include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <drivers/arm/gicv2.h>
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned on. The
+ * mpidr determines the CPU to be turned on.
+ ******************************************************************************/
+static int a5ds_pwr_domain_on(u_register_t mpidr)
+{
+	unsigned int pos = plat_core_pos_by_mpidr(mpidr);
+	uint64_t *hold_base = (uint64_t *)A5DS_HOLD_BASE;
+
+	hold_base[pos] = A5DS_HOLD_STATE_GO;
+	dsbish();
+	sev();
+
+	return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from.
+ ******************************************************************************/
+void a5ds_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	/* TODO: This setup is needed only after a cold boot*/
+	gicv2_pcpu_distif_init();
+
+	/* Enable the gic cpu interface */
+	gicv2_cpuif_enable();
+}
 
 /*******************************************************************************
  * Export the platform handlers via a5ds_psci_pm_ops. The ARM Standard
@@ -14,11 +46,16 @@
 plat_psci_ops_t a5ds_psci_pm_ops = {
 	/* dummy struct */
 	.validate_ns_entrypoint = NULL,
+	.pwr_domain_on = a5ds_pwr_domain_on,
+	.pwr_domain_on_finish = a5ds_pwr_domain_on_finish
 };
 
 int __init plat_setup_psci_ops(uintptr_t sec_entrypoint,
 				const plat_psci_ops_t **psci_ops)
 {
+	uintptr_t *mailbox = (void *)A5DS_TRUSTED_MAILBOX_BASE;
+	*mailbox = sec_entrypoint;
+
 	*psci_ops = &a5ds_psci_pm_ops;
 
 	return 0;
diff --git a/plat/arm/board/a5ds/aarch32/a5ds_helpers.S b/plat/arm/board/a5ds/aarch32/a5ds_helpers.S
index 23a22d9..ed7ad9c 100644
--- a/plat/arm/board/a5ds/aarch32/a5ds_helpers.S
+++ b/plat/arm/board/a5ds/aarch32/a5ds_helpers.S
@@ -12,17 +12,36 @@
 	.globl	plat_get_my_entrypoint
 	.globl	plat_is_my_cpu_primary
 
-	/* --------------------------------------------------------------------
+	/* -----------------------------------------------------
 	 * void plat_secondary_cold_boot_setup (void);
 	 *
-	 * For AArch32, cold-booting secondary CPUs is not yet
-	 * implemented and they panic.
-	 * --------------------------------------------------------------------
+	 * This function performs any platform specific actions
+	 * needed for a secondary cpu after a cold reset e.g
+	 * mark the cpu's presence, mechanism to place it in a
+	 * holding pen etc.
+	 * -----------------------------------------------------
 	 */
 func plat_secondary_cold_boot_setup
-cb_panic:
-	wfi
-	b	cb_panic
+	/* Calculate address of our hold entry */
+	bl	plat_my_core_pos
+	lsl	r0, r0, #A5DS_HOLD_ENTRY_SHIFT
+	mov_imm	r2, A5DS_HOLD_BASE
+	/* Clear the value stored in the hold address for the specific core */
+	mov_imm	r3, A5DS_HOLD_STATE_WAIT
+	str	r3, [r2, r0]
+	dmb	ish
+
+	/* Wait until we have a go */
+poll_mailbox:
+	ldr	r1, [r2, r0]
+	cmp	r1, #A5DS_HOLD_STATE_WAIT
+	beq	1f
+	mov_imm	r0, A5DS_TRUSTED_MAILBOX_BASE
+	ldr	r1, [r0]
+	bx	r1
+1:
+	wfe
+	b	poll_mailbox
 endfunc plat_secondary_cold_boot_setup
 
 	/* ---------------------------------------------------------------------
@@ -56,3 +75,52 @@
 	movne	r0, #0
 	bx	lr
 endfunc plat_is_my_cpu_primary
+
+	/* ---------------------------------------------------------------------
+	 * Loads MPIDR in r0 and calls plat_arm_calc_core_pos
+	 * ---------------------------------------------------------------------
+	 */
+func plat_my_core_pos
+	ldcopr	r0, MPIDR
+	b	plat_arm_calc_core_pos
+
+endfunc plat_my_core_pos
+
+	/* ---------------------------------------------------------------------
+	 * unsigned int plat_arm_calc_core_pos(u_register_t mpidr)
+	 *
+	 * Function to calculate the core position on A5DS.
+	 *
+	 * (ClusterId * A5DS_MAX_CPUS_PER_CLUSTER * A5DS_MAX_PE_PER_CPU) +
+	 * (CPUId * A5DS_MAX_PE_PER_CPU) +
+	 * ThreadId
+	 *
+	 * which can be simplified as:
+	 *
+	 * ((ClusterId * A5DS_MAX_CPUS_PER_CLUSTER + CPUId) * A5DS_MAX_PE_PER_CPU)
+	 * + ThreadId
+	 * ---------------------------------------------------------------------
+	 */
+func plat_arm_calc_core_pos
+	mov	r3, r0
+
+	/*
+	 * Check for MT bit in MPIDR. If not set, shift MPIDR to left to make it
+	 * look as if in a multi-threaded implementation
+	 */
+	tst	r0, #MPIDR_MT_MASK
+	lsleq	r3, r0, #MPIDR_AFFINITY_BITS
+
+	/* Extract individual affinity fields from MPIDR */
+	ubfx	r0, r3, #MPIDR_AFF0_SHIFT, #MPIDR_AFFINITY_BITS
+	ubfx	r1, r3, #MPIDR_AFF1_SHIFT, #MPIDR_AFFINITY_BITS
+	ubfx	r2, r3, #MPIDR_AFF2_SHIFT, #MPIDR_AFFINITY_BITS
+
+	/* Compute linear position */
+	mov	r3, #A5DS_MAX_CPUS_PER_CLUSTER
+	mla	r1, r2, r3, r1
+	mov	r3, #A5DS_MAX_PE_PER_CPU
+	mla	r0, r1, r3, r0
+
+	bx	lr
+endfunc plat_arm_calc_core_pos
diff --git a/plat/arm/board/a5ds/include/platform_def.h b/plat/arm/board/a5ds/include/platform_def.h
index db65c37..e9e4b9a 100644
--- a/plat/arm/board/a5ds/include/platform_def.h
+++ b/plat/arm/board/a5ds/include/platform_def.h
@@ -97,9 +97,9 @@
 /* Default number of threads per CPU on A5DS */
 #define A5DS_MAX_PE_PER_CPU	1
 
-#define A5DS_CORE_COUNT 1
+#define A5DS_CORE_COUNT		4
 
-#define A5DS_PRIMARY_CPU			0x0
+#define A5DS_PRIMARY_CPU	0x0
 
 #define FLASH1_BASE			UL(0x8000000)
 #define FLASH1_SIZE			UL(0x2800000)
@@ -229,11 +229,11 @@
 #define BL32_LIMIT			(ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
 
 /* Required platform porting definitions */
-#define PLATFORM_CORE_COUNT 1
-#define PLAT_NUM_PWR_DOMAINS		(A5DS_CLUSTER_COUNT + \
+#define PLATFORM_CORE_COUNT	A5DS_CORE_COUNT
+#define PLAT_NUM_PWR_DOMAINS	(A5DS_CLUSTER_COUNT + \
 					PLATFORM_CORE_COUNT) + 1
 
-#define PLAT_MAX_PWR_LVL		2
+#define PLAT_MAX_PWR_LVL	2
 
 /*
  * Other platform porting definitions are provided by included headers
@@ -325,6 +325,14 @@
 
 /* Mailbox base address */
 #define A5DS_TRUSTED_MAILBOX_BASE	A5DS_SHARED_RAM_BASE
+#define A5DS_TRUSTED_MAILBOX_SIZE	(8 + A5DS_HOLD_SIZE)
+#define A5DS_HOLD_BASE		(A5DS_TRUSTED_MAILBOX_BASE + 8)
+#define A5DS_HOLD_SIZE		(PLATFORM_CORE_COUNT * \
+					 A5DS_HOLD_ENTRY_SIZE)
+#define A5DS_HOLD_ENTRY_SHIFT	3
+#define A5DS_HOLD_ENTRY_SIZE	(1 << A5DS_HOLD_ENTRY_SHIFT)
+#define A5DS_HOLD_STATE_WAIT	0
+#define A5DS_HOLD_STATE_GO	1
 
 /*
  * GIC related constants to cater for GICv2
diff --git a/plat/arm/board/fvp/fvp_pm.c b/plat/arm/board/fvp/fvp_pm.c
index 42dec8d..0a62543 100644
--- a/plat/arm/board/fvp/fvp_pm.c
+++ b/plat/arm/board/fvp/fvp_pm.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -247,10 +247,19 @@
 {
 	fvp_power_domain_on_finish_common(target_state);
 
-	/* Enable the gic cpu interface */
+}
+
+/*******************************************************************************
+ * FVP handler called when a power domain has just been powered on and the cpu
+ * and its cluster are fully participating in coherent transaction on the
+ * interconnect. Data cache must be enabled for CPU at this point.
+ ******************************************************************************/
+static void fvp_pwr_domain_on_finish_late(const psci_power_state_t *target_state)
+{
+	/* Program GIC per-cpu distributor or re-distributor interface */
 	plat_arm_gic_pcpu_init();
 
-	/* Program the gic per-cpu distributor or re-distributor interface */
+	/* Enable GIC CPU interface */
 	plat_arm_gic_cpuif_enable();
 }
 
@@ -272,7 +281,7 @@
 
 	fvp_power_domain_on_finish_common(target_state);
 
-	/* Enable the gic cpu interface */
+	/* Enable GIC CPU interface */
 	plat_arm_gic_cpuif_enable();
 }
 
@@ -397,6 +406,7 @@
 	.pwr_domain_off = fvp_pwr_domain_off,
 	.pwr_domain_suspend = fvp_pwr_domain_suspend,
 	.pwr_domain_on_finish = fvp_pwr_domain_on_finish,
+	.pwr_domain_on_finish_late = fvp_pwr_domain_on_finish_late,
 	.pwr_domain_suspend_finish = fvp_pwr_domain_suspend_finish,
 	.system_off = fvp_system_off,
 	.system_reset = fvp_system_reset,
diff --git a/plat/arm/board/fvp/fvp_trusted_boot.c b/plat/arm/board/fvp/fvp_trusted_boot.c
index 0d160cb..dc50764 100644
--- a/plat/arm/board/fvp/fvp_trusted_boot.c
+++ b/plat/arm/board/fvp/fvp_trusted_boot.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -8,39 +8,41 @@
 #include <stdint.h>
 #include <string.h>
 
+#include <lib/mmio.h>
+
 #include <plat/common/platform.h>
 #include <platform_def.h>
 #include <tools_share/tbbr_oid.h>
 
 /*
- * Store a new non-volatile counter value. On some FVP versions, the
- * non-volatile counters are RO. On these versions we expect the values in the
- * certificates to always match the RO values so that this function is never
- * called.
+ * Store a new non-volatile counter value.
+ *
+ * On some FVP versions, the non-volatile counters are read-only so this
+ * function will always fail.
  *
  * Return: 0 = success, Otherwise = error
  */
 int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr)
 {
 	const char *oid;
-	uint32_t *nv_ctr_addr;
+	uintptr_t nv_ctr_addr;
 
 	assert(cookie != NULL);
 
 	oid = (const char *)cookie;
 	if (strcmp(oid, TRUSTED_FW_NVCOUNTER_OID) == 0) {
-		nv_ctr_addr = (uint32_t *)TFW_NVCTR_BASE;
+		nv_ctr_addr = TFW_NVCTR_BASE;
 	} else if (strcmp(oid, NON_TRUSTED_FW_NVCOUNTER_OID) == 0) {
-		nv_ctr_addr = (uint32_t *)NTFW_CTR_BASE;
+		nv_ctr_addr = NTFW_CTR_BASE;
 	} else {
 		return 1;
 	}
 
-	*(unsigned int *)nv_ctr_addr = nv_ctr;
+	mmio_write_32(nv_ctr_addr, nv_ctr);
 
-	/* Verify that the current value is the one we just wrote. */
-	if (nv_ctr != (unsigned int)(*nv_ctr_addr))
-		return 1;
-
-	return 0;
+	/*
+	 * If the FVP models a locked counter then its value cannot be updated
+	 * and the above write operation has been silently ignored.
+	 */
+	return (mmio_read_32(nv_ctr_addr) == nv_ctr) ? 0 : 1;
 }
diff --git a/plat/arm/common/arm_gicv3.c b/plat/arm/common/arm_gicv3.c
index 7f4957f..fef5376 100644
--- a/plat/arm/common/arm_gicv3.c
+++ b/plat/arm/common/arm_gicv3.c
@@ -4,6 +4,7 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
+#include <assert.h>
 #include <platform_def.h>
 
 #include <common/interrupt_props.h>
@@ -67,7 +68,7 @@
 
 static const gicv3_driver_data_t arm_gic_data __unused = {
 	.gicd_base = PLAT_ARM_GICD_BASE,
-	.gicr_base = PLAT_ARM_GICR_BASE,
+	.gicr_base = 0U,
 	.interrupt_props = arm_interrupt_props,
 	.interrupt_props_num = ARRAY_SIZE(arm_interrupt_props),
 	.rdistif_num = PLATFORM_CORE_COUNT,
@@ -86,6 +87,11 @@
 #if (!defined(__aarch64__) && defined(IMAGE_BL32)) || \
 	(defined(__aarch64__) && defined(IMAGE_BL31))
 	gicv3_driver_init(&arm_gic_data);
+
+	if (gicv3_rdistif_probe(PLAT_ARM_GICR_BASE) == -1) {
+		ERROR("No GICR base frame found for Primary CPU\n");
+		panic();
+	}
 #endif
 }
 
@@ -116,10 +122,20 @@
 }
 
 /******************************************************************************
- * ARM common helper to initialize the per-cpu redistributor interface in GICv3
+ * ARM common helper function to iterate over all GICR frames and discover the
+ * corresponding per-cpu redistributor frame as well as initialize the
+ * corresponding interface in GICv3. At the moment, Arm platforms do not have
+ * non-contiguous GICR frames.
  *****************************************************************************/
 void plat_arm_gic_pcpu_init(void)
 {
+	int result;
+
+	result = gicv3_rdistif_probe(PLAT_ARM_GICR_BASE);
+	if (result == -1) {
+		ERROR("No GICR base frame found for CPU 0x%lx\n", read_mpidr());
+		panic();
+	}
 	gicv3_rdistif_init(plat_my_core_pos());
 }
 
diff --git a/plat/arm/css/common/css_pm.c b/plat/arm/css/common/css_pm.c
index f6fc6aa..01c674f 100644
--- a/plat/arm/css/common/css_pm.c
+++ b/plat/arm/css/common/css_pm.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -76,9 +76,6 @@
 {
 	assert(CSS_CORE_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF);
 
-	/* Enable the gic cpu interface */
-	plat_arm_gic_cpuif_enable();
-
 	/*
 	 * Perform the common cluster specific operations i.e enable coherency
 	 * if this cluster was off.
@@ -100,10 +97,21 @@
 	/* Assert that the system power domain need not be initialized */
 	assert(css_system_pwr_state(target_state) == ARM_LOCAL_STATE_RUN);
 
+	css_pwr_domain_on_finisher_common(target_state);
+}
+
+/*******************************************************************************
+ * Handler called when a power domain has just been powered on and the cpu
+ * and its cluster are fully participating in coherent transaction on the
+ * interconnect. Data cache must be enabled for CPU at this point.
+ ******************************************************************************/
+void css_pwr_domain_on_finish_late(const psci_power_state_t *target_state)
+{
 	/* Program the gic per-cpu distributor or re-distributor interface */
 	plat_arm_gic_pcpu_init();
 
-	css_pwr_domain_on_finisher_common(target_state);
+	/* Enable the gic cpu interface */
+	plat_arm_gic_cpuif_enable();
 }
 
 /*******************************************************************************
@@ -185,6 +193,9 @@
 		arm_system_pwr_domain_resume();
 
 	css_pwr_domain_on_finisher_common(target_state);
+
+	/* Enable the gic cpu interface */
+	plat_arm_gic_cpuif_enable();
 }
 
 /*******************************************************************************
@@ -306,6 +317,7 @@
 plat_psci_ops_t plat_arm_psci_pm_ops = {
 	.pwr_domain_on		= css_pwr_domain_on,
 	.pwr_domain_on_finish	= css_pwr_domain_on_finish,
+	.pwr_domain_on_finish_late = css_pwr_domain_on_finish_late,
 	.pwr_domain_off		= css_pwr_domain_off,
 	.cpu_standby		= css_cpu_standby,
 	.pwr_domain_suspend	= css_pwr_domain_suspend,
diff --git a/plat/hisilicon/hikey/hikey_bl2_setup.c b/plat/hisilicon/hikey/hikey_bl2_setup.c
index 2f96efc..96136ec 100644
--- a/plat/hisilicon/hikey/hikey_bl2_setup.c
+++ b/plat/hisilicon/hikey/hikey_bl2_setup.c
@@ -114,6 +114,11 @@
 }
 #endif /* __aarch64__ */
 
+int bl2_plat_handle_pre_image_load(unsigned int image_id)
+{
+	return hikey_set_fip_addr(image_id, "fastboot");
+}
+
 int hikey_bl2_handle_post_image_load(unsigned int image_id)
 {
 	int err = 0;
diff --git a/plat/hisilicon/hikey/hikey_io_storage.c b/plat/hisilicon/hikey/hikey_io_storage.c
index 11dd973..fd610d8 100644
--- a/plat/hisilicon/hikey/hikey_io_storage.c
+++ b/plat/hisilicon/hikey/hikey_io_storage.c
@@ -18,6 +18,7 @@
 #include <drivers/io/io_memmap.h>
 #include <drivers/io/io_storage.h>
 #include <drivers/mmc.h>
+#include <drivers/partition/partition.h>
 #include <lib/mmio.h>
 #include <lib/semihosting.h>
 #include <tools_share/firmware_image_package.h>
@@ -43,9 +44,12 @@
 static int check_emmc(const uintptr_t spec);
 static int check_fip(const uintptr_t spec);
 
-static const io_block_spec_t emmc_fip_spec = {
-	.offset		= HIKEY_FIP_BASE,
-	.length		= HIKEY_FIP_MAX_SIZE,
+static io_block_spec_t emmc_fip_spec;
+
+static const io_block_spec_t emmc_gpt_spec = {
+	.offset		= 0,
+	.length		= PLAT_PARTITION_BLOCK_SIZE *
+			  (PLAT_PARTITION_MAX_ENTRIES / 4 + 2),
 };
 
 static const io_block_dev_spec_t emmc_dev_spec = {
@@ -213,6 +217,11 @@
 		check_fip
 	},
 #endif /* TRUSTED_BOARD_BOOT */
+	[GPT_IMAGE_ID] = {
+		&emmc_dev_handle,
+		(uintptr_t)&emmc_gpt_spec,
+		check_emmc
+	},
 };
 
 static int check_emmc(const uintptr_t spec)
@@ -267,6 +276,23 @@
 	(void)result;
 }
 
+int hikey_set_fip_addr(unsigned int image_id, const char *name)
+{
+	const partition_entry_t *entry;
+
+	if (emmc_fip_spec.length == 0) {
+		partition_init(GPT_IMAGE_ID);
+		entry = get_partition_entry(name);
+		if (entry == NULL) {
+			ERROR("Could NOT find the %s partition!\n", name);
+			return -ENOENT;
+		}
+		emmc_fip_spec.offset = entry->start;
+		emmc_fip_spec.length = entry->length;
+	}
+	return 0;
+}
+
 /* Return an IO device handle and specification which can be used to access
  * an image. Use this to enforce platform load policy
  */
diff --git a/plat/hisilicon/hikey/hikey_private.h b/plat/hisilicon/hikey/hikey_private.h
index d82a079..b75bc72 100644
--- a/plat/hisilicon/hikey/hikey_private.h
+++ b/plat/hisilicon/hikey/hikey_private.h
@@ -72,4 +72,6 @@
 
 void init_acpu_dvfs(void);
 
+int hikey_set_fip_addr(unsigned int image_id, const char *name);
+
 #endif /* HIKEY_PRIVATE_H */
diff --git a/plat/hisilicon/hikey/include/hikey_def.h b/plat/hisilicon/hikey/include/hikey_def.h
index 4fb3e56..590700d 100644
--- a/plat/hisilicon/hikey/include/hikey_def.h
+++ b/plat/hisilicon/hikey/include/hikey_def.h
@@ -84,8 +84,6 @@
 #define HIKEY_BL1_MMC_DATA_SIZE		0x0000B000
 
 #define EMMC_BASE			0
-#define HIKEY_FIP_BASE			(EMMC_BASE + (4 << 20))
-#define HIKEY_FIP_MAX_SIZE		(8 << 20)
 #define HIKEY_EMMC_RPMB_BASE		(EMMC_BASE + 0)
 #define HIKEY_EMMC_RPMB_MAX_SIZE	(128 << 10)
 #define HIKEY_EMMC_USERDATA_BASE	(EMMC_BASE + 0)
diff --git a/plat/hisilicon/hikey/platform.mk b/plat/hisilicon/hikey/platform.mk
index 7fd897c..fbf7432 100644
--- a/plat/hisilicon/hikey/platform.mk
+++ b/plat/hisilicon/hikey/platform.mk
@@ -76,6 +76,8 @@
 				drivers/io/io_fip.c			\
 				drivers/io/io_storage.c			\
 				drivers/mmc/mmc.c			\
+				drivers/partition/gpt.c			\
+				drivers/partition/partition.c		\
 				drivers/synopsys/emmc/dw_mmc.c		\
 				lib/cpus/aarch64/cortex_a53.S		\
 				plat/hisilicon/hikey/aarch64/hikey_helpers.S \
diff --git a/plat/hisilicon/hikey960/hikey960_bl2_setup.c b/plat/hisilicon/hikey960/hikey960_bl2_setup.c
index fc9ddab..35d7692 100644
--- a/plat/hisilicon/hikey960/hikey960_bl2_setup.c
+++ b/plat/hisilicon/hikey960/hikey960_bl2_setup.c
@@ -18,6 +18,7 @@
 #include <drivers/delay_timer.h>
 #include <drivers/dw_ufs.h>
 #include <drivers/generic_delay_timer.h>
+#include <drivers/partition/partition.h>
 #include <drivers/ufs.h>
 #include <lib/mmio.h>
 #ifdef SPD_opteed
@@ -263,6 +264,11 @@
  * This function can be used by the platforms to update/use image
  * information for given `image_id`.
  ******************************************************************************/
+int bl2_plat_handle_pre_image_load(unsigned int image_id)
+{
+	return hikey960_set_fip_addr(image_id, "fip");
+}
+
 int bl2_plat_handle_post_image_load(unsigned int image_id)
 {
 	return hikey960_bl2_handle_post_image_load(image_id);
diff --git a/plat/hisilicon/hikey960/hikey960_def.h b/plat/hisilicon/hikey960/hikey960_def.h
index 4ea3acd..9651d78 100644
--- a/plat/hisilicon/hikey960/hikey960_def.h
+++ b/plat/hisilicon/hikey960/hikey960_def.h
@@ -44,9 +44,6 @@
 #define PL011_UART_CLK_IN_HZ		19200000
 
 #define UFS_BASE			0
-/* FIP partition */
-#define HIKEY960_FIP_BASE		(UFS_BASE + 0x1400000)
-#define HIKEY960_FIP_MAX_SIZE		(12 << 20)
 
 #define HIKEY960_UFS_DESC_BASE		0x20000000
 #define HIKEY960_UFS_DESC_SIZE		0x00200000	/* 2MB */
diff --git a/plat/hisilicon/hikey960/hikey960_io_storage.c b/plat/hisilicon/hikey960/hikey960_io_storage.c
index a4e8389..e1c5845 100644
--- a/plat/hisilicon/hikey960/hikey960_io_storage.c
+++ b/plat/hisilicon/hikey960/hikey960_io_storage.c
@@ -18,6 +18,7 @@
 #include <drivers/io/io_fip.h>
 #include <drivers/io/io_memmap.h>
 #include <drivers/io/io_storage.h>
+#include <drivers/partition/partition.h>
 #include <lib/mmio.h>
 #include <lib/semihosting.h>
 #include <tools_share/firmware_image_package.h>
@@ -36,9 +37,12 @@
 size_t ufs_read_lun3_blks(int lba, uintptr_t buf, size_t size);
 size_t ufs_write_lun3_blks(int lba, const uintptr_t buf, size_t size);
 
-static const io_block_spec_t ufs_fip_spec = {
-	.offset		= HIKEY960_FIP_BASE,
-	.length		= HIKEY960_FIP_MAX_SIZE,
+static io_block_spec_t ufs_fip_spec;
+
+static const io_block_spec_t ufs_gpt_spec = {
+	.offset		= 0,
+	.length		= PLAT_PARTITION_BLOCK_SIZE *
+			  (PLAT_PARTITION_MAX_ENTRIES / 4 + 2),
 };
 
 static const io_block_dev_spec_t ufs_dev_spec = {
@@ -199,6 +203,11 @@
 		check_fip
 	},
 #endif /* TRUSTED_BOARD_BOOT */
+	[GPT_IMAGE_ID] = {
+		&ufs_dev_handle,
+		(uintptr_t)&ufs_gpt_spec,
+		check_ufs
+	},
 };
 
 static int check_ufs(const uintptr_t spec)
@@ -253,6 +262,23 @@
 	(void)result;
 }
 
+int hikey960_set_fip_addr(unsigned int image_id, const char *name)
+{
+	const partition_entry_t *entry;
+
+	if (ufs_fip_spec.length == 0) {
+		partition_init(GPT_IMAGE_ID);
+		entry = get_partition_entry(name);
+		if (entry == NULL) {
+			ERROR("Could NOT find the %s partition!\n", name);
+			return -ENOENT;
+		}
+		ufs_fip_spec.offset = entry->start;
+		ufs_fip_spec.length = entry->length;
+	}
+	return 0;
+}
+
 /* Return an IO device handle and specification which can be used to access
  * an image. Use this to enforce platform load policy
  */
diff --git a/plat/hisilicon/hikey960/hikey960_private.h b/plat/hisilicon/hikey960/hikey960_private.h
index 9a18dd6..54bf501 100644
--- a/plat/hisilicon/hikey960/hikey960_private.h
+++ b/plat/hisilicon/hikey960/hikey960_private.h
@@ -26,6 +26,7 @@
 			unsigned long coh_limit);
 void hikey960_io_setup(void);
 int hikey960_read_boardid(unsigned int *id);
+int hikey960_set_fip_addr(unsigned int image_id, const char *name);
 void hikey960_clk_init(void);
 void hikey960_pmu_init(void);
 void hikey960_regulator_enable(void);
diff --git a/plat/hisilicon/hikey960/platform.mk b/plat/hisilicon/hikey960/platform.mk
index 4f2c3c6..6cb53c7 100644
--- a/plat/hisilicon/hikey960/platform.mk
+++ b/plat/hisilicon/hikey960/platform.mk
@@ -22,11 +22,13 @@
 PLAT_PL061_MAX_GPIOS		:=	176
 PROGRAMMABLE_RESET_ADDRESS	:=	1
 ENABLE_SVE_FOR_NS		:=	0
+PLAT_PARTITION_BLOCK_SIZE	:=	4096
 
 # Process flags
 $(eval $(call add_define,HIKEY960_TSP_RAM_LOCATION_ID))
 $(eval $(call add_define,CRASH_CONSOLE_BASE))
 $(eval $(call add_define,PLAT_PL061_MAX_GPIOS))
+$(eval $(call add_define,PLAT_PARTITION_BLOCK_SIZE))
 
 # Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
 # in the FIP if the platform requires.
@@ -75,6 +77,8 @@
 				drivers/io/io_block.c			\
 				drivers/io/io_fip.c			\
 				drivers/io/io_storage.c			\
+				drivers/partition/gpt.c			\
+				drivers/partition/partition.c		\
 				drivers/synopsys/ufs/dw_ufs.c		\
 				drivers/ufs/ufs.c			\
 				lib/cpus/aarch64/cortex_a53.S		\
diff --git a/plat/mediatek/mt8173/drivers/pmic/pmic_wrap_init.c b/plat/mediatek/mt8173/drivers/pmic/pmic_wrap_init.c
deleted file mode 100644
index 8120d99..0000000
--- a/plat/mediatek/mt8173/drivers/pmic/pmic_wrap_init.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <common/debug.h>
-#include <drivers/delay_timer.h>
-#include <lib/mmio.h>
-
-#include <mt8173_def.h>
-#include <pmic_wrap_init.h>
-
-/* pmic wrap module wait_idle and read polling interval (in microseconds) */
-enum {
-	WAIT_IDLE_POLLING_DELAY_US	= 1,
-	READ_POLLING_DELAY_US		= 2
-};
-
-static inline uint32_t wait_for_state_idle(uint32_t timeout_us,
-					   void *wacs_register,
-					   void *wacs_vldclr_register,
-					   uint32_t *read_reg)
-{
-	uint32_t reg_rdata;
-	uint32_t retry;
-
-	retry = (timeout_us + WAIT_IDLE_POLLING_DELAY_US) /
-		WAIT_IDLE_POLLING_DELAY_US;
-
-	do {
-		udelay(WAIT_IDLE_POLLING_DELAY_US);
-		reg_rdata = mmio_read_32((uintptr_t)wacs_register);
-		/* if last read command timeout,clear vldclr bit
-		   read command state machine:FSM_REQ-->wfdle-->WFVLDCLR;
-		   write:FSM_REQ-->idle */
-		switch (((reg_rdata >> RDATA_WACS_FSM_SHIFT) &
-			RDATA_WACS_FSM_MASK)) {
-		case WACS_FSM_WFVLDCLR:
-			mmio_write_32((uintptr_t)wacs_vldclr_register, 1);
-			ERROR("WACS_FSM = PMIC_WRAP_WACS_VLDCLR\n");
-			break;
-		case WACS_FSM_WFDLE:
-			ERROR("WACS_FSM = WACS_FSM_WFDLE\n");
-			break;
-		case WACS_FSM_REQ:
-			ERROR("WACS_FSM = WACS_FSM_REQ\n");
-			break;
-		case WACS_FSM_IDLE:
-			goto done;
-		default:
-			break;
-		}
-
-		retry--;
-	} while (retry);
-
-done:
-	if (!retry)	/* timeout */
-		return E_PWR_WAIT_IDLE_TIMEOUT;
-
-	if (read_reg)
-		*read_reg = reg_rdata;
-	return 0;
-}
-
-static inline uint32_t wait_for_state_ready(uint32_t timeout_us,
-					    void *wacs_register,
-					    uint32_t *read_reg)
-{
-	uint32_t reg_rdata;
-	uint32_t retry;
-
-	retry = (timeout_us + READ_POLLING_DELAY_US) / READ_POLLING_DELAY_US;
-
-	do {
-		udelay(READ_POLLING_DELAY_US);
-		reg_rdata = mmio_read_32((uintptr_t)wacs_register);
-
-		if (((reg_rdata >> RDATA_WACS_FSM_SHIFT) & RDATA_WACS_FSM_MASK)
-		    == WACS_FSM_WFVLDCLR)
-			break;
-
-		retry--;
-	} while (retry);
-
-	if (!retry) {	/* timeout */
-		ERROR("timeout when waiting for idle\n");
-		return E_PWR_WAIT_IDLE_TIMEOUT_READ;
-	}
-
-	if (read_reg)
-		*read_reg = reg_rdata;
-	return 0;
-}
-
-static int32_t pwrap_wacs2(uint32_t write,
-		    uint32_t adr,
-		    uint32_t wdata,
-		    uint32_t *rdata,
-		    uint32_t init_check)
-{
-	uint32_t reg_rdata = 0;
-	uint32_t wacs_write = 0;
-	uint32_t wacs_adr = 0;
-	uint32_t wacs_cmd = 0;
-	uint32_t return_value = 0;
-
-	if (init_check) {
-		reg_rdata = mmio_read_32((uintptr_t)&mt8173_pwrap->wacs2_rdata);
-		/* Prevent someone to used pwrap before pwrap init */
-		if (((reg_rdata >> RDATA_INIT_DONE_SHIFT) &
-		    RDATA_INIT_DONE_MASK) != WACS_INIT_DONE) {
-			ERROR("initialization isn't finished\n");
-			return E_PWR_NOT_INIT_DONE;
-		}
-	}
-	reg_rdata = 0;
-	/* Check IDLE in advance */
-	return_value = wait_for_state_idle(TIMEOUT_WAIT_IDLE,
-				&mt8173_pwrap->wacs2_rdata,
-				&mt8173_pwrap->wacs2_vldclr,
-				0);
-	if (return_value != 0) {
-		ERROR("wait_for_fsm_idle fail,return_value=%d\n", return_value);
-		goto FAIL;
-	}
-	wacs_write = write << 31;
-	wacs_adr = (adr >> 1) << 16;
-	wacs_cmd = wacs_write | wacs_adr | wdata;
-
-	mmio_write_32((uintptr_t)&mt8173_pwrap->wacs2_cmd, wacs_cmd);
-	if (write == 0) {
-		if (NULL == rdata) {
-			ERROR("rdata is a NULL pointer\n");
-			return_value = E_PWR_INVALID_ARG;
-			goto FAIL;
-		}
-		return_value = wait_for_state_ready(TIMEOUT_READ,
-					&mt8173_pwrap->wacs2_rdata,
-					&reg_rdata);
-		if (return_value != 0) {
-			ERROR("wait_for_fsm_vldclr fail,return_value=%d\n",
-				 return_value);
-			goto FAIL;
-		}
-		*rdata = ((reg_rdata >> RDATA_WACS_RDATA_SHIFT)
-			  & RDATA_WACS_RDATA_MASK);
-		mmio_write_32((uintptr_t)&mt8173_pwrap->wacs2_vldclr, 1);
-	}
-FAIL:
-	return return_value;
-}
-
-/* external API for pmic_wrap user */
-
-int32_t pwrap_read(uint32_t adr, uint32_t *rdata)
-{
-	return pwrap_wacs2(0, adr, 0, rdata, 1);
-}
-
-int32_t pwrap_write(uint32_t adr, uint32_t wdata)
-{
-	return pwrap_wacs2(1, adr, wdata, 0, 1);
-}
diff --git a/plat/mediatek/mt8173/drivers/pmic/pmic_wrap_init.h b/plat/mediatek/mt8173/drivers/pmic/pmic_wrap_init.h
index 0f09771..0dffc23 100644
--- a/plat/mediatek/mt8173/drivers/pmic/pmic_wrap_init.h
+++ b/plat/mediatek/mt8173/drivers/pmic/pmic_wrap_init.h
@@ -7,11 +7,13 @@
 #ifndef PMIC_WRAP_INIT_H
 #define PMIC_WRAP_INIT_H
 
+#include <platform_def.h>
+
 /* external API */
 int32_t pwrap_read(uint32_t adr, uint32_t *rdata);
 int32_t pwrap_write(uint32_t adr, uint32_t wdata);
 
-static struct mt8173_pmic_wrap_regs *const mt8173_pwrap =
+static struct mt8173_pmic_wrap_regs *const mtk_pwrap =
 	(void *)PMIC_WRAP_BASE;
 
 /* timeout setting */
diff --git a/plat/mediatek/mt8173/drivers/rtc/rtc.c b/plat/mediatek/mt8173/drivers/rtc/rtc.c
index 2b9033e..587886c 100644
--- a/plat/mediatek/mt8173/drivers/rtc/rtc.c
+++ b/plat/mediatek/mt8173/drivers/rtc/rtc.c
@@ -5,66 +5,11 @@
  */
 
 #include <assert.h>
-
 #include <common/debug.h>
-#include <drivers/delay_timer.h>
 
 #include <mt8173_def.h>
-#include <pmic_wrap_init.h>
 #include <rtc.h>
 
-/* RTC busy status polling interval and retry count */
-enum {
-	RTC_WRTGR_POLLING_DELAY_MS	= 10,
-	RTC_WRTGR_POLLING_CNT		= 100
-};
-
-static uint16_t RTC_Read(uint32_t addr)
-{
-	uint32_t rdata = 0;
-
-	pwrap_read((uint32_t)addr, &rdata);
-	return (uint16_t)rdata;
-}
-
-static void RTC_Write(uint32_t addr, uint16_t data)
-{
-	pwrap_write((uint32_t)addr, (uint32_t)data);
-}
-
-static inline int32_t rtc_busy_wait(void)
-{
-	uint64_t retry = RTC_WRTGR_POLLING_CNT;
-
-	do {
-		mdelay(RTC_WRTGR_POLLING_DELAY_MS);
-		if (!(RTC_Read(RTC_BBPU) & RTC_BBPU_CBUSY))
-			return 1;
-		retry--;
-	} while (retry);
-
-	ERROR("[RTC] rtc cbusy time out!\n");
-	return 0;
-}
-
-static int32_t Write_trigger(void)
-{
-	RTC_Write(RTC_WRTGR, 1);
-	return rtc_busy_wait();
-}
-
-static int32_t Writeif_unlock(void)
-{
-	RTC_Write(RTC_PROT, RTC_PROT_UNLOCK1);
-	if (!Write_trigger())
-		return 0;
-	RTC_Write(RTC_PROT, RTC_PROT_UNLOCK2);
-	if (!Write_trigger())
-		return 0;
-
-	return 1;
-}
-
 void rtc_bbpu_power_down(void)
 {
 	uint16_t bbpu;
@@ -73,7 +18,7 @@
 	bbpu = RTC_BBPU_KEY | RTC_BBPU_AUTO | RTC_BBPU_PWREN;
 	if (Writeif_unlock()) {
 		RTC_Write(RTC_BBPU, bbpu);
-		if (!Write_trigger())
+		if (!RTC_Write_Trigger())
 			assert(0);
 	} else {
 		assert(0);
diff --git a/plat/mediatek/mt8173/drivers/rtc/rtc.h b/plat/mediatek/mt8173/drivers/rtc/rtc.h
index 9c4ca49..f60a4c1 100644
--- a/plat/mediatek/mt8173/drivers/rtc/rtc.h
+++ b/plat/mediatek/mt8173/drivers/rtc/rtc.h
@@ -49,6 +49,12 @@
 	RTC_BBPU_KEY	= 0x43 << 8
 };
 
+/* external API */
+uint16_t RTC_Read(uint32_t addr);
+void RTC_Write(uint32_t addr, uint16_t data);
+int32_t rtc_busy_wait(void);
+int32_t RTC_Write_Trigger(void);
+int32_t Writeif_unlock(void);
 void rtc_bbpu_power_down(void);
 
 #endif /* RTC_H */
diff --git a/plat/mediatek/mt8173/platform.mk b/plat/mediatek/mt8173/platform.mk
index e5eca9f..a66c49b 100644
--- a/plat/mediatek/mt8173/platform.mk
+++ b/plat/mediatek/mt8173/platform.mk
@@ -35,6 +35,8 @@
 				lib/cpus/aarch64/cortex_a53.S			\
 				lib/cpus/aarch64/cortex_a57.S			\
 				lib/cpus/aarch64/cortex_a72.S			\
+				${MTK_PLAT}/common/drivers/pmic_wrap/pmic_wrap_init.c	\
+				${MTK_PLAT}/common/drivers/rtc/rtc_common.c	\
 				${MTK_PLAT}/common/mtk_plat_common.c		\
 				${MTK_PLAT}/common/mtk_sip_svc.c		\
 				${MTK_PLAT_SOC}/aarch64/plat_helpers.S		\
@@ -42,7 +44,6 @@
 				${MTK_PLAT_SOC}/bl31_plat_setup.c		\
 				${MTK_PLAT_SOC}/drivers/crypt/crypt.c		\
 				${MTK_PLAT_SOC}/drivers/mtcmos/mtcmos.c		\
-				${MTK_PLAT_SOC}/drivers/pmic/pmic_wrap_init.c	\
 				${MTK_PLAT_SOC}/drivers/rtc/rtc.c		\
 				${MTK_PLAT_SOC}/drivers/spm/spm.c		\
 				${MTK_PLAT_SOC}/drivers/spm/spm_hotplug.c	\
diff --git a/plat/mediatek/mt8183/bl31_plat_setup.c b/plat/mediatek/mt8183/bl31_plat_setup.c
index 337470a..ec387f4 100644
--- a/plat/mediatek/mt8183/bl31_plat_setup.c
+++ b/plat/mediatek/mt8183/bl31_plat_setup.c
@@ -16,6 +16,7 @@
 #include <mt_gic_v3.h>
 #include <lib/coreboot.h>
 #include <lib/mmio.h>
+#include <mtk_mcdi.h>
 #include <mtk_plat_common.h>
 #include <mtspmc.h>
 #include <plat_debug.h>
@@ -23,6 +24,7 @@
 #include <plat_private.h>
 #include <platform_def.h>
 #include <scu.h>
+#include <spm.h>
 #include <drivers/ti/uart/uart_16550.h>
 
 static entry_point_info_t bl32_ep_info;
@@ -32,15 +34,49 @@
 {
 	mmio_write_32((uintptr_t)&mt8183_mcucfg->mp0_rw_rsvd0, 0x00000001);
 
-	VERBOSE("addr of cci_adb400_dcm_config: 0x%x\n",
-		mmio_read_32((uintptr_t)&mt8183_mcucfg->cci_adb400_dcm_config));
-	VERBOSE("addr of sync_dcm_config: 0x%x\n",
-		mmio_read_32((uintptr_t)&mt8183_mcucfg->sync_dcm_config));
-
-	VERBOSE("mp0_spmc: 0x%x\n",
-		mmio_read_32((uintptr_t)&mt8183_mcucfg->mp0_cputop_spmc_ctl));
-	VERBOSE("mp1_spmc: 0x%x\n",
-		mmio_read_32((uintptr_t)&mt8183_mcucfg->mp1_cputop_spmc_ctl));
+	/* Mcusys dcm control */
+	/* Enable pll plldiv dcm */
+	mmio_setbits_32((uintptr_t)&mt8183_mcucfg->bus_pll_divider_cfg,
+		BUS_PLLDIV_DCM);
+	mmio_setbits_32((uintptr_t)&mt8183_mcucfg->mp0_pll_divider_cfg,
+		MP0_PLLDIV_DCM);
+	mmio_setbits_32((uintptr_t)&mt8183_mcucfg->mp2_pll_divider_cfg,
+		MP2_PLLDIV_DCM);
+	/* Enable mscib dcm  */
+	mmio_clrsetbits_32((uintptr_t)&mt8183_mcucfg->mscib_dcm_en,
+		MCSIB_CACTIVE_SEL_MASK, MCSIB_CACTIVE_SEL);
+	mmio_clrsetbits_32((uintptr_t)&mt8183_mcucfg->mscib_dcm_en,
+		MCSIB_DCM_MASK, MCSIB_DCM);
+	/* Enable adb400 dcm */
+	mmio_clrsetbits_32((uintptr_t)&mt8183_mcucfg->cci_adb400_dcm_config,
+		CCI_ADB400_DCM_MASK, CCI_ADB400_DCM);
+	/* Enable bus clock dcm */
+	mmio_setbits_32((uintptr_t)&mt8183_mcucfg->cci_clk_ctrl,
+		MCU_BUS_DCM);
+	/* Enable bus fabric dcm */
+	mmio_clrsetbits_32(
+		(uintptr_t)&mt8183_mcucfg->mcusys_bus_fabric_dcm_ctrl,
+		MCUSYS_BUS_FABRIC_DCM_MASK,
+		MCUSYS_BUS_FABRIC_DCM);
+	/* Enable l2c sram dcm */
+	mmio_setbits_32((uintptr_t)&mt8183_mcucfg->l2c_sram_ctrl,
+		L2C_SRAM_DCM);
+	/* Enable busmp0 sync dcm */
+	mmio_clrsetbits_32((uintptr_t)&mt8183_mcucfg->sync_dcm_config,
+		SYNC_DCM_MASK, SYNC_DCM);
+	/* Enable cntvalue dcm */
+	mmio_setbits_32((uintptr_t)&mt8183_mcucfg->mcu_misc_dcm_ctrl,
+		CNTVALUEB_DCM);
+	/* Enable dcm cluster stall */
+	mmio_clrsetbits_32(
+		(uintptr_t)&mt8183_mcucfg->sync_dcm_cluster_config,
+		MCUSYS_MAX_ACCESS_LATENCY_MASK,
+		MCUSYS_MAX_ACCESS_LATENCY);
+	mmio_setbits_32((uintptr_t)&mt8183_mcucfg->sync_dcm_cluster_config,
+		MCU0_SYNC_DCM_STALL_WR_EN);
+	/* Enable rgu dcm */
+	mmio_setbits_32((uintptr_t)&mt8183_mcucfg->mp0_rgu_dcm_config,
+		CPUSYS_RGU_DCM_CINFIG);
 }
 
 /*******************************************************************************
@@ -112,6 +148,8 @@
 #if SPMC_MODE == 1
 	spmc_init();
 #endif
+	spm_boot_init();
+	mcdi_init();
 }
 
 /*******************************************************************************
diff --git a/plat/mediatek/mt8183/drivers/mcdi/mtk_mcdi.c b/plat/mediatek/mt8183/drivers/mcdi/mtk_mcdi.c
new file mode 100644
index 0000000..29eebcb
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/mcdi/mtk_mcdi.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+#include <sspm_reg.h>
+#include <mtk_mcdi.h>
+
+static inline uint32_t mcdi_mbox_read(uint32_t id)
+{
+	return mmio_read_32(SSPM_MBOX_3_BASE + (id << 2));
+}
+
+static inline void mcdi_mbox_write(uint32_t id, uint32_t val)
+{
+	mmio_write_32(SSPM_MBOX_3_BASE + (id << 2), val);
+}
+
+void sspm_set_bootaddr(uint32_t bootaddr)
+{
+	mcdi_mbox_write(MCDI_MBOX_BOOTADDR, bootaddr);
+}
+
+void sspm_cluster_pwr_off_notify(uint32_t cluster)
+{
+	mcdi_mbox_write(MCDI_MBOX_CLUSTER_0_ATF_ACTION_DONE + cluster, 1);
+}
+
+void sspm_cluster_pwr_on_notify(uint32_t cluster)
+{
+	mcdi_mbox_write(MCDI_MBOX_CLUSTER_0_ATF_ACTION_DONE + cluster, 0);
+}
+
+void sspm_standbywfi_irq_enable(uint32_t cpu_idx)
+{
+	mmio_write_32(SSPM_CFGREG_ACAO_INT_SET, STANDBYWFI_EN(cpu_idx));
+}
+
+uint32_t mcdi_avail_cpu_mask_read(void)
+{
+	return mcdi_mbox_read(MCDI_MBOX_AVAIL_CPU_MASK);
+}
+
+uint32_t mcdi_avail_cpu_mask_write(uint32_t mask)
+{
+	mcdi_mbox_write(MCDI_MBOX_AVAIL_CPU_MASK, mask);
+
+	return mask;
+}
+
+uint32_t mcdi_avail_cpu_mask_set(uint32_t mask)
+{
+	uint32_t m;
+
+	m = mcdi_mbox_read(MCDI_MBOX_AVAIL_CPU_MASK);
+	m |= mask;
+	mcdi_mbox_write(MCDI_MBOX_AVAIL_CPU_MASK, m);
+
+	return m;
+}
+
+uint32_t mcdi_avail_cpu_mask_clr(uint32_t mask)
+{
+	uint32_t m;
+
+	m = mcdi_mbox_read(MCDI_MBOX_AVAIL_CPU_MASK);
+	m &= ~mask;
+	mcdi_mbox_write(MCDI_MBOX_AVAIL_CPU_MASK, m);
+
+	return m;
+}
+
+uint32_t mcdi_cpu_cluster_pwr_stat_read(void)
+{
+	return mcdi_mbox_read(MCDI_MBOX_CPU_CLUSTER_PWR_STAT);
+}
+
+#define PAUSE_BIT		1
+#define CLUSTER_OFF_OFS		20
+#define CPU_OFF_OFS		24
+#define CLUSTER_ON_OFS		4
+#define CPU_ON_OFS		8
+
+static uint32_t target_mask(int cluster, int cpu_idx, bool on)
+{
+	uint32_t t = 0;
+
+	if (on) {
+		if (cluster >= 0)
+			t |= BIT(cluster + CLUSTER_ON_OFS);
+
+		if (cpu_idx >= 0)
+			t |= BIT(cpu_idx + CPU_ON_OFS);
+	} else {
+		if (cluster >= 0)
+			t |= BIT(cluster + CLUSTER_OFF_OFS);
+
+		if (cpu_idx >= 0)
+			t |= BIT(cpu_idx + CPU_OFF_OFS);
+	}
+
+	return t;
+}
+
+void mcdi_pause_clr(int cluster, int cpu_idx, bool on)
+{
+	uint32_t tgt = target_mask(cluster, cpu_idx, on);
+	uint32_t m = mcdi_mbox_read(MCDI_MBOX_PAUSE_ACTION);
+
+	m &= ~tgt;
+	mcdi_mbox_write(MCDI_MBOX_PAUSE_ACTION, m);
+}
+
+void mcdi_pause_set(int cluster, int cpu_idx, bool on)
+{
+	uint32_t tgt = target_mask(cluster, cpu_idx, on);
+	uint32_t m = mcdi_mbox_read(MCDI_MBOX_PAUSE_ACTION);
+	uint32_t tgtn = target_mask(-1, cpu_idx, !on);
+
+	/* request on and off at the same time to ensure it can be paused */
+	m |= tgt | tgtn;
+	mcdi_mbox_write(MCDI_MBOX_PAUSE_ACTION, m);
+
+	/* wait pause_ack */
+	while (!mcdi_mbox_read(MCDI_MBOX_PAUSE_ACK))
+		;
+
+	/* clear non-requested operation */
+	m &= ~tgtn;
+	mcdi_mbox_write(MCDI_MBOX_PAUSE_ACTION, m);
+}
+
+void mcdi_pause(void)
+{
+	uint32_t m = mcdi_mbox_read(MCDI_MBOX_PAUSE_ACTION) | BIT(PAUSE_BIT);
+
+	mcdi_mbox_write(MCDI_MBOX_PAUSE_ACTION, m);
+
+	/* wait pause_ack */
+	while (!mcdi_mbox_read(MCDI_MBOX_PAUSE_ACK))
+		;
+}
+
+void mcdi_unpause(void)
+{
+	uint32_t m = mcdi_mbox_read(MCDI_MBOX_PAUSE_ACTION) & ~BIT(PAUSE_BIT);
+
+	mcdi_mbox_write(MCDI_MBOX_PAUSE_ACTION, m);
+}
+
+void mcdi_hotplug_wait_ack(int cluster, int cpu_idx, bool on)
+{
+	uint32_t tgt = target_mask(cluster, cpu_idx, on);
+	uint32_t ack = mcdi_mbox_read(MCDI_MBOX_HP_ACK);
+
+	/* wait until ack */
+	while (!(ack & tgt))
+		ack = mcdi_mbox_read(MCDI_MBOX_HP_ACK);
+}
+
+void mcdi_hotplug_clr(int cluster, int cpu_idx, bool on)
+{
+	uint32_t tgt = target_mask(cluster, cpu_idx, on);
+	uint32_t tgt_cpu = target_mask(-1, cpu_idx, on);
+	uint32_t cmd = mcdi_mbox_read(MCDI_MBOX_HP_CMD);
+	uint32_t ack = mcdi_mbox_read(MCDI_MBOX_HP_ACK);
+
+	if (!(cmd & tgt))
+		return;
+
+	/* wait until ack */
+	while (!(ack & tgt_cpu))
+		ack = mcdi_mbox_read(MCDI_MBOX_HP_ACK);
+
+	cmd &= ~tgt;
+	mcdi_mbox_write(MCDI_MBOX_HP_CMD, cmd);
+}
+
+void mcdi_hotplug_set(int cluster, int cpu_idx, bool on)
+{
+	uint32_t tgt = target_mask(cluster, cpu_idx, on);
+	uint32_t tgt_cpu = target_mask(-1, cpu_idx, on);
+	uint32_t cmd = mcdi_mbox_read(MCDI_MBOX_HP_CMD);
+	uint32_t ack = mcdi_mbox_read(MCDI_MBOX_HP_ACK);
+
+	if ((cmd & tgt) == tgt)
+		return;
+
+	/* wait until ack clear */
+	while (ack & tgt_cpu)
+		ack = mcdi_mbox_read(MCDI_MBOX_HP_ACK);
+
+	cmd |= tgt;
+	mcdi_mbox_write(MCDI_MBOX_HP_CMD, cmd);
+}
+
+bool check_mcdi_ctl_stat(void)
+{
+	uint32_t clk_regs[] = {0x100010ac, 0x100010c8};
+	uint32_t clk_mask[] = {0x00028000, 0x00000018};
+	uint32_t tgt = target_mask(0, 0, true);
+	uint32_t m;
+	int i;
+
+	/* check clk status */
+	for (i = 0; i < ARRAY_SIZE(clk_regs); i++) {
+		if (mmio_read_32(clk_regs[i]) & clk_mask[i]) {
+			WARN("mcdi: clk check fail.\n");
+			return false;
+		}
+	}
+
+	/* check mcdi cmd handling */
+	m = mcdi_mbox_read(MCDI_MBOX_PAUSE_ACTION) | BIT(PAUSE_BIT);
+	mcdi_mbox_write(MCDI_MBOX_PAUSE_ACTION, m);
+
+	i = 500;
+	while (!mcdi_mbox_read(MCDI_MBOX_PAUSE_ACK) && --i > 0)
+		udelay(10);
+
+	m = mcdi_mbox_read(MCDI_MBOX_PAUSE_ACTION) & ~BIT(PAUSE_BIT);
+	mcdi_mbox_write(MCDI_MBOX_PAUSE_ACTION, m);
+
+	if (i == 0) {
+		WARN("mcdi: pause_action fail.\n");
+		return false;
+	}
+
+	/* check mcdi cmd handling */
+	if (mcdi_mbox_read(MCDI_MBOX_HP_CMD) ||
+			mcdi_mbox_read(MCDI_MBOX_HP_ACK)) {
+		WARN("mcdi: hp_cmd fail.\n");
+		return false;
+	}
+
+	mcdi_mbox_write(MCDI_MBOX_HP_CMD, tgt);
+
+	i = 500;
+	while ((mcdi_mbox_read(MCDI_MBOX_HP_ACK) & tgt) != tgt && --i > 0)
+		udelay(10);
+
+	mcdi_mbox_write(MCDI_MBOX_HP_CMD, 0);
+
+	if (i == 0) {
+		WARN("mcdi: hp_ack fail.\n");
+		return false;
+	}
+
+	return true;
+}
+
+void mcdi_init(void)
+{
+	mcdi_avail_cpu_mask_write(0x01); /* cpu0 default on */
+}
diff --git a/plat/mediatek/mt8183/drivers/mcdi/mtk_mcdi.h b/plat/mediatek/mt8183/drivers/mcdi/mtk_mcdi.h
new file mode 100644
index 0000000..9a40df1
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/mcdi/mtk_mcdi.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __MTK_MCDI_H__
+#define __MTK_MCDI_H__
+
+#include <stdbool.h>
+
+void sspm_set_bootaddr(uint32_t bootaddr);
+void sspm_standbywfi_irq_enable(uint32_t cpu_idx);
+void sspm_cluster_pwr_off_notify(uint32_t cluster);
+void sspm_cluster_pwr_on_notify(uint32_t cluster);
+
+uint32_t mcdi_avail_cpu_mask_read(void);
+uint32_t mcdi_avail_cpu_mask_write(uint32_t mask);
+uint32_t mcdi_avail_cpu_mask_set(uint32_t mask);
+uint32_t mcdi_avail_cpu_mask_clr(uint32_t mask);
+uint32_t mcdi_cpu_cluster_pwr_stat_read(void);
+
+void mcdi_pause(void);
+void mcdi_unpause(void);
+void mcdi_pause_set(int cluster, int cpu_idx, bool on);
+void mcdi_pause_clr(int cluster, int cpu_idx, bool on);
+void mcdi_hotplug_set(int cluster, int cpu_idx, bool on);
+void mcdi_hotplug_clr(int cluster, int cpu_idx, bool on);
+void mcdi_hotplug_wait_ack(int cluster, int cpu_idx, bool on);
+
+bool check_mcdi_ctl_stat(void);
+void mcdi_init(void);
+
+#endif /* __MTK_MCDI_H__ */
diff --git a/plat/mediatek/mt8183/drivers/pmic/pmic.c b/plat/mediatek/mt8183/drivers/pmic/pmic.c
index 818c149..b0f898e 100644
--- a/plat/mediatek/mt8183/drivers/pmic/pmic.c
+++ b/plat/mediatek/mt8183/drivers/pmic/pmic.c
@@ -7,6 +7,24 @@
 #include <pmic_wrap_init.h>
 #include <pmic.h>
 
+void bcpu_enable(uint32_t en)
+{
+	pwrap_write(PMIC_VPROC11_OP_EN, 0x1);
+	if (en)
+		pwrap_write(PMIC_VPROC11_CON0, 1);
+	else
+		pwrap_write(PMIC_VPROC11_CON0, 0);
+}
+
+void bcpu_sram_enable(uint32_t en)
+{
+	pwrap_write(PMIC_VSRAM_PROC11_OP_EN, 0x1);
+	if (en)
+		pwrap_write(PMIC_VSRAM_PROC11_CON0, 1);
+	else
+		pwrap_write(PMIC_VSRAM_PROC11_CON0, 0);
+}
+
 void wk_pmic_enable_sdn_delay(void)
 {
 	uint32_t con;
diff --git a/plat/mediatek/mt8183/drivers/pmic/pmic.h b/plat/mediatek/mt8183/drivers/pmic/pmic.h
index d62c6da..f19f9f6 100644
--- a/plat/mediatek/mt8183/drivers/pmic/pmic.h
+++ b/plat/mediatek/mt8183/drivers/pmic/pmic.h
@@ -10,7 +10,11 @@
 enum {
 	PMIC_TMA_KEY = 0x03a8,
 	PMIC_PWRHOLD = 0x0a08,
-	PMIC_PSEQ_ELR11 = 0x0a62
+	PMIC_PSEQ_ELR11 = 0x0a62,
+	PMIC_VPROC11_CON0 = 0x1388,
+	PMIC_VPROC11_OP_EN = 0x1390,
+	PMIC_VSRAM_PROC11_CON0 = 0x1b46,
+	PMIC_VSRAM_PROC11_OP_EN = 0x1b4e
 };
 
 enum {
@@ -18,6 +22,8 @@
 };
 
 /* external API */
+void bcpu_enable(uint32_t en);
+void bcpu_sram_enable(uint32_t en);
 void wk_pmic_enable_sdn_delay(void);
 void pmic_power_off(void);
 
diff --git a/plat/mediatek/mt8183/drivers/spm/spm.c b/plat/mediatek/mt8183/drivers/spm/spm.c
new file mode 100644
index 0000000..dcafd55
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/spm/spm.c
@@ -0,0 +1,328 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <lib/bakery_lock.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+#include <spm.h>
+#include <spm_pmic_wrap.h>
+
+DEFINE_BAKERY_LOCK(spm_lock);
+
+const char *wakeup_src_str[32] = {
+	[0] = "R12_PCM_TIMER",
+	[1] = "R12_SSPM_WDT_EVENT_B",
+	[2] = "R12_KP_IRQ_B",
+	[3] = "R12_APWDT_EVENT_B",
+	[4] = "R12_APXGPT1_EVENT_B",
+	[5] = "R12_CONN2AP_SPM_WAKEUP_B",
+	[6] = "R12_EINT_EVENT_B",
+	[7] = "R12_CONN_WDT_IRQ_B",
+	[8] = "R12_CCIF0_EVENT_B",
+	[9] = "R12_LOWBATTERY_IRQ_B",
+	[10] = "R12_SSPM_SPM_IRQ_B",
+	[11] = "R12_SCP_SPM_IRQ_B",
+	[12] = "R12_SCP_WDT_EVENT_B",
+	[13] = "R12_PCM_WDT_WAKEUP_B",
+	[14] = "R12_USB_CDSC_B ",
+	[15] = "R12_USB_POWERDWN_B",
+	[16] = "R12_SYS_TIMER_EVENT_B",
+	[17] = "R12_EINT_EVENT_SECURE_B",
+	[18] = "R12_CCIF1_EVENT_B",
+	[19] = "R12_UART0_IRQ_B",
+	[20] = "R12_AFE_IRQ_MCU_B",
+	[21] = "R12_THERM_CTRL_EVENT_B",
+	[22] = "R12_SYS_CIRQ_IRQ_B",
+	[23] = "R12_MD2AP_PEER_EVENT_B",
+	[24] = "R12_CSYSPWREQ_B",
+	[25] = "R12_MD1_WDT_B ",
+	[26] = "R12_CLDMA_EVENT_B",
+	[27] = "R12_SEJ_WDT_GPT_B",
+	[28] = "R12_ALL_SSPM_WAKEUP_B",
+	[29] = "R12_CPU_IRQ_B",
+	[30] = "R12_CPU_WFI_AND_B"
+};
+
+const char *spm_get_firmware_version(void)
+{
+	return "DYNAMIC_SPM_FW_VERSION";
+}
+
+void spm_lock_init(void)
+{
+	bakery_lock_init(&spm_lock);
+}
+
+void spm_lock_get(void)
+{
+	bakery_lock_get(&spm_lock);
+}
+
+void spm_lock_release(void)
+{
+	bakery_lock_release(&spm_lock);
+}
+
+void spm_set_bootaddr(unsigned long bootaddr)
+{
+	/* initialize core4~7 boot entry address */
+	mmio_write_32(SW2SPM_MAILBOX_3, bootaddr);
+}
+
+void spm_set_cpu_status(int cpu)
+{
+	if (cpu >= 0 && cpu < 4) {
+		mmio_write_32(ROOT_CPUTOP_ADDR, 0x10006204);
+		mmio_write_32(ROOT_CORE_ADDR, 0x10006208 + (cpu * 0x4));
+	} else if (cpu >= 4 && cpu < 8) {
+		mmio_write_32(ROOT_CPUTOP_ADDR, 0x10006218);
+		mmio_write_32(ROOT_CORE_ADDR, 0x1000621c + ((cpu - 4) * 0x4));
+	} else {
+		ERROR("%s: error cpu number %d\n", __func__, cpu);
+	}
+}
+
+void spm_set_power_control(const struct pwr_ctrl *pwrctrl)
+{
+	mmio_write_32(SPM_AP_STANDBY_CON,
+		      ((pwrctrl->wfi_op & 0x1) << 0) |
+		      ((pwrctrl->mp0_cputop_idle_mask & 0x1) << 1) |
+		      ((pwrctrl->mp1_cputop_idle_mask & 0x1) << 2) |
+		      ((pwrctrl->mcusys_idle_mask & 0x1) << 4) |
+		      ((pwrctrl->mm_mask_b & 0x3) << 16) |
+		      ((pwrctrl->md_ddr_en_0_dbc_en & 0x1) << 18) |
+		      ((pwrctrl->md_ddr_en_1_dbc_en & 0x1) << 19) |
+		      ((pwrctrl->md_mask_b & 0x3) << 20) |
+		      ((pwrctrl->sspm_mask_b & 0x1) << 22) |
+		      ((pwrctrl->scp_mask_b & 0x1) << 23) |
+		      ((pwrctrl->srcclkeni_mask_b & 0x1) << 24) |
+		      ((pwrctrl->md_apsrc_1_sel & 0x1) << 25) |
+		      ((pwrctrl->md_apsrc_0_sel & 0x1) << 26) |
+		      ((pwrctrl->conn_ddr_en_dbc_en & 0x1) << 27) |
+		      ((pwrctrl->conn_mask_b & 0x1) << 28) |
+		      ((pwrctrl->conn_apsrc_sel & 0x1) << 29));
+
+	mmio_write_32(SPM_SRC_REQ,
+		      ((pwrctrl->spm_apsrc_req & 0x1) << 0) |
+		      ((pwrctrl->spm_f26m_req & 0x1) << 1) |
+		      ((pwrctrl->spm_infra_req & 0x1) << 3) |
+		      ((pwrctrl->spm_vrf18_req & 0x1) << 4) |
+		      ((pwrctrl->spm_ddren_req & 0x1) << 7) |
+		      ((pwrctrl->spm_rsv_src_req & 0x7) << 8) |
+		      ((pwrctrl->spm_ddren_2_req & 0x1) << 11) |
+		      ((pwrctrl->cpu_md_dvfs_sop_force_on & 0x1) << 16));
+
+	mmio_write_32(SPM_SRC_MASK,
+		      ((pwrctrl->csyspwreq_mask & 0x1) << 0) |
+		      ((pwrctrl->ccif0_md_event_mask_b & 0x1) << 1) |
+		      ((pwrctrl->ccif0_ap_event_mask_b & 0x1) << 2) |
+		      ((pwrctrl->ccif1_md_event_mask_b & 0x1) << 3) |
+		      ((pwrctrl->ccif1_ap_event_mask_b & 0x1) << 4) |
+		      ((pwrctrl->ccif2_md_event_mask_b & 0x1) << 5) |
+		      ((pwrctrl->ccif2_ap_event_mask_b & 0x1) << 6) |
+		      ((pwrctrl->ccif3_md_event_mask_b & 0x1) << 7) |
+		      ((pwrctrl->ccif3_ap_event_mask_b & 0x1) << 8) |
+		      ((pwrctrl->md_srcclkena_0_infra_mask_b & 0x1) << 9) |
+		      ((pwrctrl->md_srcclkena_1_infra_mask_b & 0x1) << 10) |
+		      ((pwrctrl->conn_srcclkena_infra_mask_b & 0x1) << 11) |
+		      ((pwrctrl->ufs_infra_req_mask_b & 0x1) << 12) |
+		      ((pwrctrl->srcclkeni_infra_mask_b & 0x1) << 13) |
+		      ((pwrctrl->md_apsrc_req_0_infra_mask_b & 0x1) << 14) |
+		      ((pwrctrl->md_apsrc_req_1_infra_mask_b & 0x1) << 15) |
+		      ((pwrctrl->conn_apsrcreq_infra_mask_b & 0x1) << 16) |
+		      ((pwrctrl->ufs_srcclkena_mask_b & 0x1) << 17) |
+		      ((pwrctrl->md_vrf18_req_0_mask_b & 0x1) << 18) |
+		      ((pwrctrl->md_vrf18_req_1_mask_b & 0x1) << 19) |
+		      ((pwrctrl->ufs_vrf18_req_mask_b & 0x1) << 20) |
+		      ((pwrctrl->gce_vrf18_req_mask_b & 0x1) << 21) |
+		      ((pwrctrl->conn_infra_req_mask_b & 0x1) << 22) |
+		      ((pwrctrl->gce_apsrc_req_mask_b & 0x1) << 23) |
+		      ((pwrctrl->disp0_apsrc_req_mask_b & 0x1) << 24) |
+		      ((pwrctrl->disp1_apsrc_req_mask_b & 0x1) << 25) |
+		      ((pwrctrl->mfg_req_mask_b & 0x1) << 26) |
+		      ((pwrctrl->vdec_req_mask_b & 0x1) << 27));
+
+	mmio_write_32(SPM_SRC2_MASK,
+		      ((pwrctrl->md_ddr_en_0_mask_b & 0x1) << 0) |
+		      ((pwrctrl->md_ddr_en_1_mask_b & 0x1) << 1) |
+		      ((pwrctrl->conn_ddr_en_mask_b & 0x1) << 2) |
+		      ((pwrctrl->ddren_sspm_apsrc_req_mask_b & 0x1) << 3) |
+		      ((pwrctrl->ddren_scp_apsrc_req_mask_b & 0x1) << 4) |
+		      ((pwrctrl->disp0_ddren_mask_b & 0x1) << 5) |
+		      ((pwrctrl->disp1_ddren_mask_b & 0x1) << 6) |
+		      ((pwrctrl->gce_ddren_mask_b & 0x1) << 7) |
+		      ((pwrctrl->ddren_emi_self_refresh_ch0_mask_b & 0x1)
+		       << 8) |
+		      ((pwrctrl->ddren_emi_self_refresh_ch1_mask_b & 0x1)
+		       << 9));
+
+	mmio_write_32(SPM_WAKEUP_EVENT_MASK,
+		      ((pwrctrl->spm_wakeup_event_mask & 0xffffffff) << 0));
+
+	mmio_write_32(SPM_WAKEUP_EVENT_EXT_MASK,
+		      ((pwrctrl->spm_wakeup_event_ext_mask & 0xffffffff)
+		       << 0));
+
+	mmio_write_32(SPM_SRC3_MASK,
+		      ((pwrctrl->md_ddr_en_2_0_mask_b & 0x1) << 0) |
+		      ((pwrctrl->md_ddr_en_2_1_mask_b & 0x1) << 1) |
+		      ((pwrctrl->conn_ddr_en_2_mask_b & 0x1) << 2) |
+		      ((pwrctrl->ddren2_sspm_apsrc_req_mask_b & 0x1) << 3) |
+		      ((pwrctrl->ddren2_scp_apsrc_req_mask_b & 0x1) << 4) |
+		      ((pwrctrl->disp0_ddren2_mask_b & 0x1) << 5) |
+		      ((pwrctrl->disp1_ddren2_mask_b & 0x1) << 6) |
+		      ((pwrctrl->gce_ddren2_mask_b & 0x1) << 7) |
+		      ((pwrctrl->ddren2_emi_self_refresh_ch0_mask_b & 0x1)
+		       << 8) |
+		      ((pwrctrl->ddren2_emi_self_refresh_ch1_mask_b & 0x1)
+		       << 9));
+
+	mmio_write_32(MP0_CPU0_WFI_EN,
+		      ((pwrctrl->mp0_cpu0_wfi_en & 0x1) << 0));
+	mmio_write_32(MP0_CPU1_WFI_EN,
+		      ((pwrctrl->mp0_cpu1_wfi_en & 0x1) << 0));
+	mmio_write_32(MP0_CPU2_WFI_EN,
+		      ((pwrctrl->mp0_cpu2_wfi_en & 0x1) << 0));
+	mmio_write_32(MP0_CPU3_WFI_EN,
+		      ((pwrctrl->mp0_cpu3_wfi_en & 0x1) << 0));
+
+	mmio_write_32(MP1_CPU0_WFI_EN,
+		      ((pwrctrl->mp1_cpu0_wfi_en & 0x1) << 0));
+	mmio_write_32(MP1_CPU1_WFI_EN,
+		      ((pwrctrl->mp1_cpu1_wfi_en & 0x1) << 0));
+	mmio_write_32(MP1_CPU2_WFI_EN,
+		      ((pwrctrl->mp1_cpu2_wfi_en & 0x1) << 0));
+	mmio_write_32(MP1_CPU3_WFI_EN,
+		      ((pwrctrl->mp1_cpu3_wfi_en & 0x1) << 0));
+}
+
+void spm_disable_pcm_timer(void)
+{
+	mmio_clrsetbits_32(PCM_CON1, PCM_TIMER_EN_LSB, SPM_REGWR_CFG_KEY);
+}
+
+void spm_set_wakeup_event(const struct pwr_ctrl *pwrctrl)
+{
+	uint32_t val, mask, isr;
+
+	val = pwrctrl->timer_val ? pwrctrl->timer_val : PCM_TIMER_MAX;
+	mmio_write_32(PCM_TIMER_VAL, val);
+	mmio_setbits_32(PCM_CON1, SPM_REGWR_CFG_KEY | PCM_TIMER_EN_LSB);
+
+	mask = pwrctrl->wake_src;
+
+	if (pwrctrl->csyspwreq_mask)
+		mask &= ~WAKE_SRC_R12_CSYSPWREQ_B;
+
+	mmio_write_32(SPM_WAKEUP_EVENT_MASK, ~mask);
+
+	isr = mmio_read_32(SPM_IRQ_MASK) & SPM_TWAM_IRQ_MASK_LSB;
+	mmio_write_32(SPM_IRQ_MASK, isr | ISRM_RET_IRQ_AUX);
+}
+
+void spm_set_pcm_flags(const struct pwr_ctrl *pwrctrl)
+{
+	mmio_write_32(SPM_SW_FLAG, pwrctrl->pcm_flags);
+	mmio_write_32(SPM_SW_RSV_2, pwrctrl->pcm_flags1);
+}
+
+void spm_set_pcm_wdt(int en)
+{
+	if (en) {
+		mmio_clrsetbits_32(PCM_CON1, PCM_WDT_WAKE_MODE_LSB,
+				   SPM_REGWR_CFG_KEY);
+
+		if (mmio_read_32(PCM_TIMER_VAL) > PCM_TIMER_MAX)
+			mmio_write_32(PCM_TIMER_VAL, PCM_TIMER_MAX);
+		mmio_write_32(PCM_WDT_VAL,
+			      mmio_read_32(PCM_TIMER_VAL) + PCM_WDT_TIMEOUT);
+		mmio_setbits_32(PCM_CON1, SPM_REGWR_CFG_KEY | PCM_WDT_EN_LSB);
+	} else {
+		mmio_clrsetbits_32(PCM_CON1, PCM_WDT_EN_LSB,
+				   SPM_REGWR_CFG_KEY);
+	}
+}
+
+void spm_send_cpu_wakeup_event(void)
+{
+	mmio_write_32(PCM_REG_DATA_INI, 0);
+	mmio_write_32(SPM_CPU_WAKEUP_EVENT, 1);
+}
+
+void spm_get_wakeup_status(struct wake_status *wakesta)
+{
+	wakesta->assert_pc = mmio_read_32(PCM_REG_DATA_INI);
+	wakesta->r12 = mmio_read_32(SPM_SW_RSV_0);
+	wakesta->r12_ext = mmio_read_32(PCM_REG12_EXT_DATA);
+	wakesta->raw_sta = mmio_read_32(SPM_WAKEUP_STA);
+	wakesta->raw_ext_sta = mmio_read_32(SPM_WAKEUP_EXT_STA);
+	wakesta->wake_misc = mmio_read_32(SPM_BSI_D0_SR);
+	wakesta->timer_out = mmio_read_32(SPM_BSI_D1_SR);
+	wakesta->r13 = mmio_read_32(PCM_REG13_DATA);
+	wakesta->idle_sta = mmio_read_32(SUBSYS_IDLE_STA);
+	wakesta->req_sta = mmio_read_32(SRC_REQ_STA);
+	wakesta->sw_flag = mmio_read_32(SPM_SW_FLAG);
+	wakesta->sw_flag1 = mmio_read_32(SPM_SW_RSV_2);
+	wakesta->r15 = mmio_read_32(PCM_REG15_DATA);
+	wakesta->debug_flag = mmio_read_32(SPM_SW_DEBUG);
+	wakesta->debug_flag1 = mmio_read_32(WDT_LATCH_SPARE0_FIX);
+	wakesta->event_reg = mmio_read_32(SPM_BSI_D2_SR);
+	wakesta->isr = mmio_read_32(SPM_IRQ_STA);
+}
+
+void spm_clean_after_wakeup(void)
+{
+	mmio_write_32(SPM_SW_RSV_0,
+		      mmio_read_32(SPM_WAKEUP_STA) |
+		      mmio_read_32(SPM_SW_RSV_0));
+	mmio_write_32(SPM_CPU_WAKEUP_EVENT, 0);
+	mmio_write_32(SPM_WAKEUP_EVENT_MASK, ~0);
+	mmio_setbits_32(SPM_IRQ_MASK, ISRM_ALL_EXC_TWAM);
+	mmio_write_32(SPM_IRQ_STA, ISRC_ALL_EXC_TWAM);
+	mmio_write_32(SPM_SWINT_CLR, PCM_SW_INT_ALL);
+}
+
+void spm_output_wake_reason(struct wake_status *wakesta, const char *scenario)
+{
+	uint32_t i;
+
+	if (wakesta->assert_pc != 0) {
+		INFO("%s: PCM ASSERT AT %u, ULPOSC_CON = 0x%x\n",
+		     scenario, wakesta->assert_pc, mmio_read_32(ULPOSC_CON));
+		goto spm_debug_flags;
+	}
+
+	for (i = 0; i <= 31; i++) {
+		if (wakesta->r12 & (1U << i)) {
+			INFO("%s: wake up by %s, timer_out = %u\n",
+			     scenario, wakeup_src_str[i], wakesta->timer_out);
+			break;
+		}
+	}
+
+spm_debug_flags:
+	INFO("r15 = 0x%x, r13 = 0x%x, debug_flag = 0x%x 0x%x\n",
+	     wakesta->r15, wakesta->r13, wakesta->debug_flag,
+	     wakesta->debug_flag1);
+	INFO("sw_flag = 0x%x 0x%x, r12 = 0x%x, r12_ext = 0x%x\n",
+	     wakesta->sw_flag, wakesta->sw_flag1, wakesta->r12,
+	     wakesta->r12_ext);
+	INFO("idle_sta = 0x%x, req_sta =  0x%x, event_reg = 0x%x\n",
+	     wakesta->idle_sta, wakesta->req_sta, wakesta->event_reg);
+	INFO("isr = 0x%x, raw_sta = 0x%x, raw_ext_sta = 0x%x\n",
+	     wakesta->isr, wakesta->raw_sta, wakesta->raw_ext_sta);
+	INFO("wake_misc = 0x%x\n", wakesta->wake_misc);
+}
+
+void spm_boot_init(void)
+{
+	NOTICE("%s() start\n", __func__);
+
+	spm_lock_init();
+	mt_spm_pmic_wrap_set_phase(PMIC_WRAP_PHASE_ALLINONE);
+
+	NOTICE("%s() end\n", __func__);
+}
diff --git a/plat/mediatek/mt8183/drivers/spm/spm.h b/plat/mediatek/mt8183/drivers/spm/spm.h
new file mode 100644
index 0000000..b2e83dc
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/spm/spm.h
@@ -0,0 +1,2552 @@
+/*
+ * Copyright (c) 2019, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SPM_H
+#define SPM_H
+
+/**************************************
+ * Define and Declare
+ **************************************/
+
+#define POWERON_CONFIG_EN              (SPM_BASE + 0x000)
+#define SPM_POWER_ON_VAL0              (SPM_BASE + 0x004)
+#define SPM_POWER_ON_VAL1              (SPM_BASE + 0x008)
+#define SPM_CLK_CON                    (SPM_BASE + 0x00C)
+#define SPM_CLK_SETTLE                 (SPM_BASE + 0x010)
+#define SPM_AP_STANDBY_CON             (SPM_BASE + 0x014)
+#define PCM_CON0                       (SPM_BASE + 0x018)
+#define PCM_CON1                       (SPM_BASE + 0x01C)
+#define PCM_IM_PTR                     (SPM_BASE + 0x020)
+#define PCM_IM_LEN                     (SPM_BASE + 0x024)
+#define PCM_REG_DATA_INI               (SPM_BASE + 0x028)
+#define PCM_PWR_IO_EN                  (SPM_BASE + 0x02C)
+#define PCM_TIMER_VAL                  (SPM_BASE + 0x030)
+#define PCM_WDT_VAL                    (SPM_BASE + 0x034)
+#define PCM_IM_HOST_RW_PTR             (SPM_BASE + 0x038)
+#define PCM_IM_HOST_RW_DAT             (SPM_BASE + 0x03C)
+#define PCM_EVENT_VECTOR0              (SPM_BASE + 0x040)
+#define PCM_EVENT_VECTOR1              (SPM_BASE + 0x044)
+#define PCM_EVENT_VECTOR2              (SPM_BASE + 0x048)
+#define PCM_EVENT_VECTOR3              (SPM_BASE + 0x04C)
+#define PCM_EVENT_VECTOR4              (SPM_BASE + 0x050)
+#define PCM_EVENT_VECTOR5              (SPM_BASE + 0x054)
+#define PCM_EVENT_VECTOR6              (SPM_BASE + 0x058)
+#define PCM_EVENT_VECTOR7              (SPM_BASE + 0x05C)
+#define PCM_EVENT_VECTOR8              (SPM_BASE + 0x060)
+#define PCM_EVENT_VECTOR9              (SPM_BASE + 0x064)
+#define PCM_EVENT_VECTOR10             (SPM_BASE + 0x068)
+#define PCM_EVENT_VECTOR11             (SPM_BASE + 0x06C)
+#define PCM_EVENT_VECTOR12             (SPM_BASE + 0x070)
+#define PCM_EVENT_VECTOR13             (SPM_BASE + 0x074)
+#define PCM_EVENT_VECTOR14             (SPM_BASE + 0x078)
+#define PCM_EVENT_VECTOR15             (SPM_BASE + 0x07C)
+#define PCM_EVENT_VECTOR_EN            (SPM_BASE + 0x080)
+#define SPM_SRAM_RSV_CON               (SPM_BASE + 0x088)
+#define SPM_SWINT                      (SPM_BASE + 0x08C)
+#define SPM_SWINT_SET                  (SPM_BASE + 0x090)
+#define SPM_SWINT_CLR                  (SPM_BASE + 0x094)
+#define SPM_SCP_MAILBOX                (SPM_BASE + 0x098)
+#define SCP_SPM_MAILBOX                (SPM_BASE + 0x09C)
+#define SPM_TWAM_CON                   (SPM_BASE + 0x0A0)
+#define SPM_TWAM_WINDOW_LEN            (SPM_BASE + 0x0A4)
+#define SPM_TWAM_IDLE_SEL              (SPM_BASE + 0x0A8)
+#define SPM_SCP_IRQ                    (SPM_BASE + 0x0AC)
+#define SPM_CPU_WAKEUP_EVENT           (SPM_BASE + 0x0B0)
+#define SPM_IRQ_MASK                   (SPM_BASE + 0x0B4)
+#define SPM_SRC_REQ                    (SPM_BASE + 0x0B8)
+#define SPM_SRC_MASK                   (SPM_BASE + 0x0BC)
+#define SPM_SRC2_MASK                  (SPM_BASE + 0x0C0)
+#define SPM_WAKEUP_EVENT_MASK          (SPM_BASE + 0x0C4)
+#define SPM_WAKEUP_EVENT_EXT_MASK      (SPM_BASE + 0x0C8)
+#define SPM_TWAM_EVENT_CLEAR           (SPM_BASE + 0x0CC)
+#define SCP_CLK_CON                    (SPM_BASE + 0x0D0)
+#define PCM_DEBUG_CON                  (SPM_BASE + 0x0D4)
+#define DDR_EN_DBC_LEN                 (SPM_BASE + 0x0D8)
+#define AHB_BUS_CON                    (SPM_BASE + 0x0DC)
+#define SPM_SRC3_MASK                  (SPM_BASE + 0x0E0)
+#define DDR_EN_EMI_DBC_CON             (SPM_BASE + 0x0E4)
+#define SSPM_CLK_CON                   (SPM_BASE + 0x0E8)
+#define PCM_REG0_DATA                  (SPM_BASE + 0x100)
+#define PCM_REG1_DATA                  (SPM_BASE + 0x104)
+#define PCM_REG2_DATA                  (SPM_BASE + 0x108)
+#define PCM_REG3_DATA                  (SPM_BASE + 0x10C)
+#define PCM_REG4_DATA                  (SPM_BASE + 0x110)
+#define PCM_REG5_DATA                  (SPM_BASE + 0x114)
+#define PCM_REG6_DATA                  (SPM_BASE + 0x118)
+#define PCM_REG7_DATA                  (SPM_BASE + 0x11C)
+#define PCM_REG8_DATA                  (SPM_BASE + 0x120)
+#define PCM_REG9_DATA                  (SPM_BASE + 0x124)
+#define PCM_REG10_DATA                 (SPM_BASE + 0x128)
+#define PCM_REG11_DATA                 (SPM_BASE + 0x12C)
+#define PCM_REG12_DATA                 (SPM_BASE + 0x130)
+#define PCM_REG13_DATA                 (SPM_BASE + 0x134)
+#define PCM_REG14_DATA                 (SPM_BASE + 0x138)
+#define PCM_REG15_DATA                 (SPM_BASE + 0x13C)
+#define PCM_REG12_MASK_B_STA           (SPM_BASE + 0x140)
+#define PCM_REG12_EXT_DATA             (SPM_BASE + 0x144)
+#define PCM_REG12_EXT_MASK_B_STA       (SPM_BASE + 0x148)
+#define PCM_EVENT_REG_STA              (SPM_BASE + 0x14C)
+#define PCM_TIMER_OUT                  (SPM_BASE + 0x150)
+#define PCM_WDT_OUT                    (SPM_BASE + 0x154)
+#define SPM_IRQ_STA                    (SPM_BASE + 0x158)
+#define SPM_WAKEUP_STA                 (SPM_BASE + 0x15C)
+#define SPM_WAKEUP_EXT_STA             (SPM_BASE + 0x160)
+#define SPM_WAKEUP_MISC                (SPM_BASE + 0x164)
+#define BUS_PROTECT_RDY                (SPM_BASE + 0x168)
+#define BUS_PROTECT2_RDY               (SPM_BASE + 0x16C)
+#define SUBSYS_IDLE_STA                (SPM_BASE + 0x170)
+#define CPU_IDLE_STA                   (SPM_BASE + 0x174)
+#define PCM_FSM_STA                    (SPM_BASE + 0x178)
+#define SRC_REQ_STA                    (SPM_BASE + 0x17C)
+#define PWR_STATUS                     (SPM_BASE + 0x180)
+#define PWR_STATUS_2ND                 (SPM_BASE + 0x184)
+#define CPU_PWR_STATUS                 (SPM_BASE + 0x188)
+#define CPU_PWR_STATUS_2ND             (SPM_BASE + 0x18C)
+#define MISC_STA                       (SPM_BASE + 0x190)
+#define SPM_SRC_RDY_STA                (SPM_BASE + 0x194)
+#define DRAMC_DBG_LATCH                (SPM_BASE + 0x19C)
+#define SPM_TWAM_LAST_STA0             (SPM_BASE + 0x1A0)
+#define SPM_TWAM_LAST_STA1             (SPM_BASE + 0x1A4)
+#define SPM_TWAM_LAST_STA2             (SPM_BASE + 0x1A8)
+#define SPM_TWAM_LAST_STA3             (SPM_BASE + 0x1AC)
+#define SPM_TWAM_CURR_STA0             (SPM_BASE + 0x1B0)
+#define SPM_TWAM_CURR_STA1             (SPM_BASE + 0x1B4)
+#define SPM_TWAM_CURR_STA2             (SPM_BASE + 0x1B8)
+#define SPM_TWAM_CURR_STA3             (SPM_BASE + 0x1BC)
+#define SPM_TWAM_TIMER_OUT             (SPM_BASE + 0x1C0)
+#define SPM_DVFS_STA                   (SPM_BASE + 0x1C8)
+#define BUS_PROTECT3_RDY               (SPM_BASE + 0x1CC)
+#define SRC_DDREN_STA                  (SPM_BASE + 0x1E0)
+#define MCU_PWR_CON                    (SPM_BASE + 0x200)
+#define MP0_CPUTOP_PWR_CON             (SPM_BASE + 0x204)
+#define MP0_CPU0_PWR_CON               (SPM_BASE + 0x208)
+#define MP0_CPU1_PWR_CON               (SPM_BASE + 0x20C)
+#define MP0_CPU2_PWR_CON               (SPM_BASE + 0x210)
+#define MP0_CPU3_PWR_CON               (SPM_BASE + 0x214)
+#define MP1_CPUTOP_PWR_CON             (SPM_BASE + 0x218)
+#define MP1_CPU0_PWR_CON               (SPM_BASE + 0x21C)
+#define MP1_CPU1_PWR_CON               (SPM_BASE + 0x220)
+#define MP1_CPU2_PWR_CON               (SPM_BASE + 0x224)
+#define MP1_CPU3_PWR_CON               (SPM_BASE + 0x228)
+#define MP0_CPUTOP_L2_PDN              (SPM_BASE + 0x240)
+#define MP0_CPUTOP_L2_SLEEP_B          (SPM_BASE + 0x244)
+#define MP0_CPU0_L1_PDN                (SPM_BASE + 0x248)
+#define MP0_CPU1_L1_PDN                (SPM_BASE + 0x24C)
+#define MP0_CPU2_L1_PDN                (SPM_BASE + 0x250)
+#define MP0_CPU3_L1_PDN                (SPM_BASE + 0x254)
+#define MP1_CPUTOP_L2_PDN              (SPM_BASE + 0x258)
+#define MP1_CPUTOP_L2_SLEEP_B          (SPM_BASE + 0x25C)
+#define MP1_CPU0_L1_PDN                (SPM_BASE + 0x260)
+#define MP1_CPU1_L1_PDN                (SPM_BASE + 0x264)
+#define MP1_CPU2_L1_PDN                (SPM_BASE + 0x268)
+#define MP1_CPU3_L1_PDN                (SPM_BASE + 0x26C)
+#define CPU_EXT_BUCK_ISO               (SPM_BASE + 0x290)
+#define DUMMY1_PWR_CON                 (SPM_BASE + 0x2B0)
+#define BYPASS_SPMC                    (SPM_BASE + 0x2B4)
+#define SPMC_DORMANT_ENABLE            (SPM_BASE + 0x2B8)
+#define ARMPLL_CLK_CON                 (SPM_BASE + 0x2BC)
+#define SPMC_IN_RET                    (SPM_BASE + 0x2C0)
+#define VDE_PWR_CON                    (SPM_BASE + 0x300)
+#define VEN_PWR_CON                    (SPM_BASE + 0x304)
+#define ISP_PWR_CON                    (SPM_BASE + 0x308)
+#define DIS_PWR_CON                    (SPM_BASE + 0x30C)
+#define MFG_CORE1_PWR_CON              (SPM_BASE + 0x310)
+#define AUDIO_PWR_CON                  (SPM_BASE + 0x314)
+#define IFR_PWR_CON                    (SPM_BASE + 0x318)
+#define DPY_PWR_CON                    (SPM_BASE + 0x31C)
+#define MD1_PWR_CON                    (SPM_BASE + 0x320)
+#define VPU_TOP_PWR_CON                (SPM_BASE + 0x324)
+#define CONN_PWR_CON                   (SPM_BASE + 0x32C)
+#define VPU_CORE2_PWR_CON              (SPM_BASE + 0x330)
+#define MFG_ASYNC_PWR_CON              (SPM_BASE + 0x334)
+#define MFG_PWR_CON                    (SPM_BASE + 0x338)
+#define VPU_CORE0_PWR_CON              (SPM_BASE + 0x33C)
+#define VPU_CORE1_PWR_CON              (SPM_BASE + 0x340)
+#define CAM_PWR_CON                    (SPM_BASE + 0x344)
+#define MFG_2D_PWR_CON                 (SPM_BASE + 0x348)
+#define MFG_CORE0_PWR_CON              (SPM_BASE + 0x34C)
+#define SYSRAM_CON                     (SPM_BASE + 0x350)
+#define SYSROM_CON                     (SPM_BASE + 0x354)
+#define SSPM_SRAM_CON                  (SPM_BASE + 0x358)
+#define SCP_SRAM_CON                   (SPM_BASE + 0x35C)
+#define UFS_SRAM_CON                   (SPM_BASE + 0x36C)
+#define DUMMY_SRAM_CON                 (SPM_BASE + 0x380)
+#define MD_EXT_BUCK_ISO_CON            (SPM_BASE + 0x390)
+#define MD_SRAM_ISO_CON                (SPM_BASE + 0x394)
+#define MD_EXTRA_PWR_CON               (SPM_BASE + 0x398)
+#define EXT_BUCK_CON                   (SPM_BASE + 0x3A0)
+#define MBIST_EFUSE_REPAIR_ACK_STA     (SPM_BASE + 0x3D0)
+#define SPM_DVFS_CON                   (SPM_BASE + 0x400)
+#define SPM_MDBSI_CON                  (SPM_BASE + 0x404)
+#define SPM_MAS_PAUSE_MASK_B           (SPM_BASE + 0x408)
+#define SPM_MAS_PAUSE2_MASK_B          (SPM_BASE + 0x40C)
+#define SPM_BSI_GEN                    (SPM_BASE + 0x410)
+#define SPM_BSI_EN_SR                  (SPM_BASE + 0x414)
+#define SPM_BSI_CLK_SR                 (SPM_BASE + 0x418)
+#define SPM_BSI_D0_SR                  (SPM_BASE + 0x41C)
+#define SPM_BSI_D1_SR                  (SPM_BASE + 0x420)
+#define SPM_BSI_D2_SR                  (SPM_BASE + 0x424)
+#define SPM_AP_SEMA                    (SPM_BASE + 0x428)
+#define SPM_SPM_SEMA                   (SPM_BASE + 0x42C)
+#define AP_MDSRC_REQ                   (SPM_BASE + 0x430)
+#define SPM2MD_DVFS_CON                (SPM_BASE + 0x438)
+#define MD2SPM_DVFS_CON                (SPM_BASE + 0x43C)
+#define DRAMC_DPY_CLK_SW_CON_RSV       (SPM_BASE + 0x440)
+#define DPY_LP_CON                     (SPM_BASE + 0x444)
+#define CPU_DVFS_REQ                   (SPM_BASE + 0x448)
+#define SPM_PLL_CON                    (SPM_BASE + 0x44C)
+#define SPM_EMI_BW_MODE                (SPM_BASE + 0x450)
+#define AP2MD_PEER_WAKEUP              (SPM_BASE + 0x454)
+#define ULPOSC_CON                     (SPM_BASE + 0x458)
+#define SPM2MM_CON                     (SPM_BASE + 0x45C)
+#define DRAMC_DPY_CLK_SW_CON_SEL       (SPM_BASE + 0x460)
+#define DRAMC_DPY_CLK_SW_CON           (SPM_BASE + 0x464)
+#define SPM_S1_MODE_CH                 (SPM_BASE + 0x468)
+#define EMI_SELF_REFRESH_CH_STA        (SPM_BASE + 0x46C)
+#define DRAMC_DPY_CLK_SW_CON_SEL2      (SPM_BASE + 0x470)
+#define DRAMC_DPY_CLK_SW_CON2          (SPM_BASE + 0x474)
+#define DRAMC_DMYRD_CON                (SPM_BASE + 0x478)
+#define SPM_DRS_CON                    (SPM_BASE + 0x47C)
+#define SPM_SEMA_M0                    (SPM_BASE + 0x480)
+#define SPM_SEMA_M1                    (SPM_BASE + 0x484)
+#define SPM_SEMA_M2                    (SPM_BASE + 0x488)
+#define SPM_SEMA_M3                    (SPM_BASE + 0x48C)
+#define SPM_SEMA_M4                    (SPM_BASE + 0x490)
+#define SPM_SEMA_M5                    (SPM_BASE + 0x494)
+#define SPM_SEMA_M6                    (SPM_BASE + 0x498)
+#define SPM_SEMA_M7                    (SPM_BASE + 0x49C)
+#define SPM_MAS_PAUSE_MM_MASK_B        (SPM_BASE + 0x4A0)
+#define SPM_MAS_PAUSE_MCU_MASK_B       (SPM_BASE + 0x4A4)
+#define SRAM_DREQ_ACK                  (SPM_BASE + 0x4AC)
+#define SRAM_DREQ_CON                  (SPM_BASE + 0x4B0)
+#define SRAM_DREQ_CON_SET              (SPM_BASE + 0x4B4)
+#define SRAM_DREQ_CON_CLR              (SPM_BASE + 0x4B8)
+#define SPM2EMI_ENTER_ULPM             (SPM_BASE + 0x4BC)
+#define SPM_SSPM_IRQ                   (SPM_BASE + 0x4C0)
+#define SPM2PMCU_INT                   (SPM_BASE + 0x4C4)
+#define SPM2PMCU_INT_SET               (SPM_BASE + 0x4C8)
+#define SPM2PMCU_INT_CLR               (SPM_BASE + 0x4CC)
+#define SPM2PMCU_MAILBOX_0             (SPM_BASE + 0x4D0)
+#define SPM2PMCU_MAILBOX_1             (SPM_BASE + 0x4D4)
+#define SPM2PMCU_MAILBOX_2             (SPM_BASE + 0x4D8)
+#define SPM2PMCU_MAILBOX_3             (SPM_BASE + 0x4DC)
+#define PMCU2SPM_INT                   (SPM_BASE + 0x4E0)
+#define PMCU2SPM_INT_SET               (SPM_BASE + 0x4E4)
+#define PMCU2SPM_INT_CLR               (SPM_BASE + 0x4E8)
+#define PMCU2SPM_MAILBOX_0             (SPM_BASE + 0x4EC)
+#define PMCU2SPM_MAILBOX_1             (SPM_BASE + 0x4F0)
+#define PMCU2SPM_MAILBOX_2             (SPM_BASE + 0x4F4)
+#define PMCU2SPM_MAILBOX_3             (SPM_BASE + 0x4F8)
+#define PMCU2SPM_CFG                   (SPM_BASE + 0x4FC)
+#define MP0_CPU0_IRQ_MASK              (SPM_BASE + 0x500)
+#define MP0_CPU1_IRQ_MASK              (SPM_BASE + 0x504)
+#define MP0_CPU2_IRQ_MASK              (SPM_BASE + 0x508)
+#define MP0_CPU3_IRQ_MASK              (SPM_BASE + 0x50C)
+#define MP1_CPU0_IRQ_MASK              (SPM_BASE + 0x510)
+#define MP1_CPU1_IRQ_MASK              (SPM_BASE + 0x514)
+#define MP1_CPU2_IRQ_MASK              (SPM_BASE + 0x518)
+#define MP1_CPU3_IRQ_MASK              (SPM_BASE + 0x51C)
+#define MP0_CPU0_WFI_EN                (SPM_BASE + 0x530)
+#define MP0_CPU1_WFI_EN                (SPM_BASE + 0x534)
+#define MP0_CPU2_WFI_EN                (SPM_BASE + 0x538)
+#define MP0_CPU3_WFI_EN                (SPM_BASE + 0x53C)
+#define MP1_CPU0_WFI_EN                (SPM_BASE + 0x540)
+#define MP1_CPU1_WFI_EN                (SPM_BASE + 0x544)
+#define MP1_CPU2_WFI_EN                (SPM_BASE + 0x548)
+#define MP1_CPU3_WFI_EN                (SPM_BASE + 0x54C)
+#define MP0_L2CFLUSH                   (SPM_BASE + 0x554)
+#define MP1_L2CFLUSH                   (SPM_BASE + 0x558)
+#define CPU_PTPOD2_CON                 (SPM_BASE + 0x560)
+#define ROOT_CPUTOP_ADDR               (SPM_BASE + 0x570)
+#define ROOT_CORE_ADDR                 (SPM_BASE + 0x574)
+#define CPU_SPARE_CON                  (SPM_BASE + 0x580)
+#define CPU_SPARE_CON_SET              (SPM_BASE + 0x584)
+#define CPU_SPARE_CON_CLR              (SPM_BASE + 0x588)
+#define SPM2SW_MAILBOX_0               (SPM_BASE + 0x5D0)
+#define SPM2SW_MAILBOX_1               (SPM_BASE + 0x5D4)
+#define SPM2SW_MAILBOX_2               (SPM_BASE + 0x5D8)
+#define SPM2SW_MAILBOX_3               (SPM_BASE + 0x5DC)
+#define SW2SPM_INT                     (SPM_BASE + 0x5E0)
+#define SW2SPM_INT_SET                 (SPM_BASE + 0x5E4)
+#define SW2SPM_INT_CLR                 (SPM_BASE + 0x5E8)
+#define SW2SPM_MAILBOX_0               (SPM_BASE + 0x5EC)
+#define SW2SPM_MAILBOX_1               (SPM_BASE + 0x5F0)
+#define SW2SPM_MAILBOX_2               (SPM_BASE + 0x5F4)
+#define SW2SPM_MAILBOX_3               (SPM_BASE + 0x5F8)
+#define SW2SPM_CFG                     (SPM_BASE + 0x5FC)
+#define SPM_SW_FLAG                    (SPM_BASE + 0x600)
+#define SPM_SW_DEBUG                   (SPM_BASE + 0x604)
+#define SPM_SW_RSV_0                   (SPM_BASE + 0x608)
+#define SPM_SW_RSV_1                   (SPM_BASE + 0x60C)
+#define SPM_SW_RSV_2                   (SPM_BASE + 0x610)
+#define SPM_SW_RSV_3                   (SPM_BASE + 0x614)
+#define SPM_SW_RSV_4                   (SPM_BASE + 0x618)
+#define SPM_SW_RSV_5                   (SPM_BASE + 0x61C)
+#define SPM_RSV_CON                    (SPM_BASE + 0x620)
+#define SPM_RSV_STA                    (SPM_BASE + 0x624)
+#define SPM_RSV_CON1                   (SPM_BASE + 0x628)
+#define SPM_RSV_STA1                   (SPM_BASE + 0x62C)
+#define SPM_PASR_DPD_0                 (SPM_BASE + 0x630)
+#define SPM_PASR_DPD_1                 (SPM_BASE + 0x634)
+#define SPM_PASR_DPD_2                 (SPM_BASE + 0x638)
+#define SPM_PASR_DPD_3                 (SPM_BASE + 0x63C)
+#define SPM_SPARE_CON                  (SPM_BASE + 0x640)
+#define SPM_SPARE_CON_SET              (SPM_BASE + 0x644)
+#define SPM_SPARE_CON_CLR              (SPM_BASE + 0x648)
+#define SPM_SW_RSV_6                   (SPM_BASE + 0x64C)
+#define SPM_SW_RSV_7                   (SPM_BASE + 0x650)
+#define SPM_SW_RSV_8                   (SPM_BASE + 0x654)
+#define SPM_SW_RSV_9                   (SPM_BASE + 0x658)
+#define SPM_SW_RSV_10                  (SPM_BASE + 0x65C)
+#define SPM_SW_RSV_18                  (SPM_BASE + 0x67C)
+#define SPM_SW_RSV_19                  (SPM_BASE + 0x680)
+#define DVFSRC_EVENT_MASK_CON          (SPM_BASE + 0x690)
+#define DVFSRC_EVENT_FORCE_ON          (SPM_BASE + 0x694)
+#define DVFSRC_EVENT_SEL               (SPM_BASE + 0x698)
+#define SPM_DVFS_EVENT_STA             (SPM_BASE + 0x69C)
+#define SPM_DVFS_EVENT_STA1            (SPM_BASE + 0x6A0)
+#define SPM_DVFS_LEVEL                 (SPM_BASE + 0x6A4)
+#define DVFS_ABORT_STA                 (SPM_BASE + 0x6A8)
+#define DVFS_ABORT_OTHERS_MASK         (SPM_BASE + 0x6AC)
+#define SPM_DFS_LEVEL                  (SPM_BASE + 0x6B0)
+#define SPM_DVS_LEVEL                  (SPM_BASE + 0x6B4)
+#define SPM_DVFS_MISC                  (SPM_BASE + 0x6B8)
+#define SPARE_SRC_REQ_MASK             (SPM_BASE + 0x6C0)
+#define SCP_VCORE_LEVEL                (SPM_BASE + 0x6C4)
+#define SC_MM_CK_SEL_CON               (SPM_BASE + 0x6C8)
+#define SPARE_ACK_STA                  (SPM_BASE + 0x6F0)
+#define SPARE_ACK_MASK                 (SPM_BASE + 0x6F4)
+#define SPM_DVFS_CON1                  (SPM_BASE + 0x700)
+#define SPM_DVFS_CON1_STA              (SPM_BASE + 0x704)
+#define SPM_DVFS_CMD0                  (SPM_BASE + 0x710)
+#define SPM_DVFS_CMD1                  (SPM_BASE + 0x714)
+#define SPM_DVFS_CMD2                  (SPM_BASE + 0x718)
+#define SPM_DVFS_CMD3                  (SPM_BASE + 0x71C)
+#define SPM_DVFS_CMD4                  (SPM_BASE + 0x720)
+#define SPM_DVFS_CMD5                  (SPM_BASE + 0x724)
+#define SPM_DVFS_CMD6                  (SPM_BASE + 0x728)
+#define SPM_DVFS_CMD7                  (SPM_BASE + 0x72C)
+#define SPM_DVFS_CMD8                  (SPM_BASE + 0x730)
+#define SPM_DVFS_CMD9                  (SPM_BASE + 0x734)
+#define SPM_DVFS_CMD10                 (SPM_BASE + 0x738)
+#define SPM_DVFS_CMD11                 (SPM_BASE + 0x73C)
+#define SPM_DVFS_CMD12                 (SPM_BASE + 0x740)
+#define SPM_DVFS_CMD13                 (SPM_BASE + 0x744)
+#define SPM_DVFS_CMD14                 (SPM_BASE + 0x748)
+#define SPM_DVFS_CMD15                 (SPM_BASE + 0x74C)
+#define WDT_LATCH_SPARE0_FIX           (SPM_BASE + 0x780)
+#define WDT_LATCH_SPARE1_FIX           (SPM_BASE + 0x784)
+#define WDT_LATCH_SPARE2_FIX           (SPM_BASE + 0x788)
+#define WDT_LATCH_SPARE3_FIX           (SPM_BASE + 0x78C)
+#define SPARE_ACK_IN_FIX               (SPM_BASE + 0x790)
+#define DCHA_LATCH_RSV0_FIX            (SPM_BASE + 0x794)
+#define DCHB_LATCH_RSV0_FIX            (SPM_BASE + 0x798)
+#define PCM_WDT_LATCH_0                (SPM_BASE + 0x800)
+#define PCM_WDT_LATCH_1                (SPM_BASE + 0x804)
+#define PCM_WDT_LATCH_2                (SPM_BASE + 0x808)
+#define PCM_WDT_LATCH_3                (SPM_BASE + 0x80C)
+#define PCM_WDT_LATCH_4                (SPM_BASE + 0x810)
+#define PCM_WDT_LATCH_5                (SPM_BASE + 0x814)
+#define PCM_WDT_LATCH_6                (SPM_BASE + 0x818)
+#define PCM_WDT_LATCH_7                (SPM_BASE + 0x81C)
+#define PCM_WDT_LATCH_8                (SPM_BASE + 0x820)
+#define PCM_WDT_LATCH_9                (SPM_BASE + 0x824)
+#define WDT_LATCH_SPARE0               (SPM_BASE + 0x828)
+#define WDT_LATCH_SPARE1               (SPM_BASE + 0x82C)
+#define WDT_LATCH_SPARE2               (SPM_BASE + 0x830)
+#define WDT_LATCH_SPARE3               (SPM_BASE + 0x834)
+#define PCM_WDT_LATCH_10               (SPM_BASE + 0x838)
+#define PCM_WDT_LATCH_11               (SPM_BASE + 0x83C)
+#define DCHA_GATING_LATCH_0            (SPM_BASE + 0x840)
+#define DCHA_GATING_LATCH_1            (SPM_BASE + 0x844)
+#define DCHA_GATING_LATCH_2            (SPM_BASE + 0x848)
+#define DCHA_GATING_LATCH_3            (SPM_BASE + 0x84C)
+#define DCHA_GATING_LATCH_4            (SPM_BASE + 0x850)
+#define DCHA_GATING_LATCH_5            (SPM_BASE + 0x854)
+#define DCHA_GATING_LATCH_6            (SPM_BASE + 0x858)
+#define DCHA_GATING_LATCH_7            (SPM_BASE + 0x85C)
+#define DCHB_GATING_LATCH_0            (SPM_BASE + 0x860)
+#define DCHB_GATING_LATCH_1            (SPM_BASE + 0x864)
+#define DCHB_GATING_LATCH_2            (SPM_BASE + 0x868)
+#define DCHB_GATING_LATCH_3            (SPM_BASE + 0x86C)
+#define DCHB_GATING_LATCH_4            (SPM_BASE + 0x870)
+#define DCHB_GATING_LATCH_5            (SPM_BASE + 0x874)
+#define DCHB_GATING_LATCH_6            (SPM_BASE + 0x878)
+#define DCHB_GATING_LATCH_7            (SPM_BASE + 0x87C)
+#define DCHA_LATCH_RSV0                (SPM_BASE + 0x880)
+#define DCHB_LATCH_RSV0                (SPM_BASE + 0x884)
+#define PCM_WDT_LATCH_12               (SPM_BASE + 0x888)
+#define PCM_WDT_LATCH_13               (SPM_BASE + 0x88C)
+#define SPM_PC_TRACE_CON               (SPM_BASE + 0x8C0)
+#define SPM_PC_TRACE_G0                (SPM_BASE + 0x8C4)
+#define SPM_PC_TRACE_G1                (SPM_BASE + 0x8C8)
+#define SPM_PC_TRACE_G2                (SPM_BASE + 0x8CC)
+#define SPM_PC_TRACE_G3                (SPM_BASE + 0x8D0)
+#define SPM_PC_TRACE_G4                (SPM_BASE + 0x8D4)
+#define SPM_PC_TRACE_G5                (SPM_BASE + 0x8D8)
+#define SPM_PC_TRACE_G6                (SPM_BASE + 0x8DC)
+#define SPM_PC_TRACE_G7                (SPM_BASE + 0x8E0)
+#define SPM_ACK_CHK_CON                (SPM_BASE + 0x900)
+#define SPM_ACK_CHK_PC                 (SPM_BASE + 0x904)
+#define SPM_ACK_CHK_SEL                (SPM_BASE + 0x908)
+#define SPM_ACK_CHK_TIMER              (SPM_BASE + 0x90C)
+#define SPM_ACK_CHK_STA                (SPM_BASE + 0x910)
+#define SPM_ACK_CHK_LATCH              (SPM_BASE + 0x914)
+#define SPM_ACK_CHK_CON2               (SPM_BASE + 0x920)
+#define SPM_ACK_CHK_PC2                (SPM_BASE + 0x924)
+#define SPM_ACK_CHK_SEL2               (SPM_BASE + 0x928)
+#define SPM_ACK_CHK_TIMER2             (SPM_BASE + 0x92C)
+#define SPM_ACK_CHK_STA2               (SPM_BASE + 0x930)
+#define SPM_ACK_CHK_LATCH2             (SPM_BASE + 0x934)
+#define SPM_ACK_CHK_CON3               (SPM_BASE + 0x940)
+#define SPM_ACK_CHK_PC3                (SPM_BASE + 0x944)
+#define SPM_ACK_CHK_SEL3               (SPM_BASE + 0x948)
+#define SPM_ACK_CHK_TIMER3             (SPM_BASE + 0x94C)
+#define SPM_ACK_CHK_STA3               (SPM_BASE + 0x950)
+#define SPM_ACK_CHK_LATCH3             (SPM_BASE + 0x954)
+#define SPM_ACK_CHK_CON4               (SPM_BASE + 0x960)
+#define SPM_ACK_CHK_PC4                (SPM_BASE + 0x964)
+#define SPM_ACK_CHK_SEL4               (SPM_BASE + 0x968)
+#define SPM_ACK_CHK_TIMER4             (SPM_BASE + 0x96C)
+#define SPM_ACK_CHK_STA4               (SPM_BASE + 0x970)
+#define SPM_ACK_CHK_LATCH4             (SPM_BASE + 0x974)
+
+/* POWERON_CONFIG_EN (0x10006000+0x000) */
+#define BCLK_CG_EN_LSB                      (1U << 0)       /* 1b */
+#define MD_BCLK_CG_EN_LSB                   (1U << 1)       /* 1b */
+#define PROJECT_CODE_LSB                    (1U << 16)      /* 16b */
+/* SPM_POWER_ON_VAL0 (0x10006000+0x004) */
+#define POWER_ON_VAL0_LSB                   (1U << 0)       /* 32b */
+/* SPM_POWER_ON_VAL1 (0x10006000+0x008) */
+#define POWER_ON_VAL1_LSB                   (1U << 0)       /* 32b */
+/* SPM_CLK_CON (0x10006000+0x00C) */
+#define SYSCLK0_EN_CTRL_LSB                 (1U << 0)       /* 2b */
+#define SYSCLK1_EN_CTRL_LSB                 (1U << 2)       /* 2b */
+#define SYS_SETTLE_SEL_LSB                  (1U << 4)       /* 1b */
+#define SPM_LOCK_INFRA_DCM_LSB              (1U << 5)       /* 1b */
+#define EXT_SRCCLKEN_MASK_LSB               (1U << 6)       /* 3b */
+#define CXO32K_REMOVE_EN_MD1_LSB            (1U << 9)       /* 1b */
+#define CXO32K_REMOVE_EN_MD2_LSB            (1U << 10)      /* 1b */
+#define CLKSQ0_SEL_CTRL_LSB                 (1U << 11)      /* 1b */
+#define CLKSQ1_SEL_CTRL_LSB                 (1U << 12)      /* 1b */
+#define SRCLKEN0_EN_LSB                     (1U << 13)      /* 1b */
+#define SRCLKEN1_EN_LSB                     (1U << 14)      /* 1b */
+#define SCP_DCM_EN_LSB                      (1U << 15)      /* 1b */
+#define SYSCLK0_SRC_MASK_B_LSB              (1U << 16)      /* 7b */
+#define SYSCLK1_SRC_MASK_B_LSB              (1U << 23)      /* 7b */
+/* SPM_CLK_SETTLE (0x10006000+0x010) */
+#define SYSCLK_SETTLE_LSB                   (1U << 0)       /* 28b */
+/* SPM_AP_STANDBY_CON (0x10006000+0x014) */
+#define WFI_OP_LSB                          (1U << 0)       /* 1b */
+#define MP0_CPUTOP_IDLE_MASK_LSB            (1U << 1)       /* 1b */
+#define MP1_CPUTOP_IDLE_MASK_LSB            (1U << 2)       /* 1b */
+#define MCUSYS_IDLE_MASK_LSB                (1U << 4)       /* 1b */
+#define MM_MASK_B_LSB                       (1U << 16)      /* 2b */
+#define MD_DDR_EN_0_DBC_EN_LSB              (1U << 18)      /* 1b */
+#define MD_DDR_EN_1_DBC_EN_LSB              (1U << 19)      /* 1b */
+#define MD_MASK_B_LSB                       (1U << 20)      /* 2b */
+#define SSPM_MASK_B_LSB                     (1U << 22)      /* 1b */
+#define SCP_MASK_B_LSB                      (1U << 23)      /* 1b */
+#define SRCCLKENI_MASK_B_LSB                (1U << 24)      /* 1b */
+#define MD_APSRC_1_SEL_LSB                  (1U << 25)      /* 1b */
+#define MD_APSRC_0_SEL_LSB                  (1U << 26)      /* 1b */
+#define CONN_DDR_EN_DBC_EN_LSB              (1U << 27)      /* 1b */
+#define CONN_MASK_B_LSB                     (1U << 28)      /* 1b */
+#define CONN_APSRC_SEL_LSB                  (1U << 29)      /* 1b */
+/* PCM_CON0 (0x10006000+0x018) */
+#define PCM_KICK_L_LSB                      (1U << 0)       /* 1b */
+#define IM_KICK_L_LSB                       (1U << 1)       /* 1b */
+#define PCM_CK_EN_LSB                       (1U << 2)       /* 1b */
+#define EN_IM_SLEEP_DVS_LSB                 (1U << 3)       /* 1b */
+#define IM_AUTO_PDN_EN_LSB                  (1U << 4)       /* 1b */
+#define PCM_SW_RESET_LSB                    (1U << 15)      /* 1b */
+#define PROJECT_CODE_LSB                    (1U << 16)      /* 16b */
+/* PCM_CON1 (0x10006000+0x01C) */
+#define IM_SLAVE_LSB                        (1U << 0)       /* 1b */
+#define IM_SLEEP_LSB                        (1U << 1)       /* 1b */
+#define MIF_APBEN_LSB                       (1U << 3)       /* 1b */
+#define IM_PDN_LSB                          (1U << 4)       /* 1b */
+#define PCM_TIMER_EN_LSB                    (1U << 5)       /* 1b */
+#define IM_NONRP_EN_LSB                     (1U << 6)       /* 1b */
+#define DIS_MIF_PROT_LSB                    (1U << 7)       /* 1b */
+#define PCM_WDT_EN_LSB                      (1U << 8)       /* 1b */
+#define PCM_WDT_WAKE_MODE_LSB               (1U << 9)       /* 1b */
+#define SPM_SRAM_SLEEP_B_LSB                (1U << 10)      /* 1b */
+#define SPM_SRAM_ISOINT_B_LSB               (1U << 11)      /* 1b */
+#define EVENT_LOCK_EN_LSB                   (1U << 12)      /* 1b */
+#define SRCCLKEN_FAST_RESP_LSB              (1U << 13)      /* 1b */
+#define SCP_APB_INTERNAL_EN_LSB             (1U << 14)      /* 1b */
+#define PROJECT_CODE_LSB                    (1U << 16)      /* 16b */
+/* PCM_IM_PTR (0x10006000+0x020) */
+#define PCM_IM_PTR_LSB                      (1U << 0)       /* 32b */
+/* PCM_IM_LEN (0x10006000+0x024) */
+#define PCM_IM_LEN_LSB                      (1U << 0)       /* 13b */
+/* PCM_REG_DATA_INI (0x10006000+0x028) */
+#define PCM_REG_DATA_INI_LSB                (1U << 0)       /* 32b */
+/* PCM_PWR_IO_EN (0x10006000+0x02C) */
+#define PCM_PWR_IO_EN_LSB                   (1U << 0)       /* 8b */
+#define PCM_RF_SYNC_EN_LSB                  (1U << 16)      /* 8b */
+/* PCM_TIMER_VAL (0x10006000+0x030) */
+#define PCM_TIMER_VAL_LSB                   (1U << 0)       /* 32b */
+/* PCM_WDT_VAL (0x10006000+0x034) */
+#define PCM_WDT_VAL_LSB                     (1U << 0)       /* 32b */
+/* PCM_IM_HOST_RW_PTR (0x10006000+0x038) */
+#define PCM_IM_HOST_RW_PTR_LSB              (1U << 0)       /* 12b */
+#define PCM_IM_HOST_W_EN_LSB                (1U << 30)      /* 1b */
+#define PCM_IM_HOST_EN_LSB                  (1U << 31)      /* 1b */
+/* PCM_IM_HOST_RW_DAT (0x10006000+0x03C) */
+#define PCM_IM_HOST_RW_DAT_LSB              (1U << 0)       /* 32b */
+/* PCM_EVENT_VECTOR0 (0x10006000+0x040) */
+#define PCM_EVENT_VECTOR_0_LSB              (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_0_LSB              (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_0_LSB             (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_0_LSB              (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR1 (0x10006000+0x044) */
+#define PCM_EVENT_VECTOR_1_LSB              (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_1_LSB              (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_1_LSB             (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_1_LSB              (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR2 (0x10006000+0x048) */
+#define PCM_EVENT_VECTOR_2_LSB              (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_2_LSB              (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_2_LSB             (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_2_LSB              (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR3 (0x10006000+0x04C) */
+#define PCM_EVENT_VECTOR_3_LSB              (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_3_LSB              (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_3_LSB             (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_3_LSB              (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR4 (0x10006000+0x050) */
+#define PCM_EVENT_VECTOR_4_LSB              (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_4_LSB              (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_4_LSB             (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_4_LSB              (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR5 (0x10006000+0x054) */
+#define PCM_EVENT_VECTOR_5_LSB              (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_5_LSB              (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_5_LSB             (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_5_LSB              (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR6 (0x10006000+0x058) */
+#define PCM_EVENT_VECTOR_6_LSB              (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_6_LSB              (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_6_LSB             (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_6_LSB              (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR7 (0x10006000+0x05C) */
+#define PCM_EVENT_VECTOR_7_LSB              (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_7_LSB              (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_7_LSB             (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_7_LSB              (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR8 (0x10006000+0x060) */
+#define PCM_EVENT_VECTOR_8_LSB              (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_8_LSB              (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_8_LSB             (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_8_LSB              (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR9 (0x10006000+0x064) */
+#define PCM_EVENT_VECTOR_9_LSB              (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_9_LSB              (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_9_LSB             (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_9_LSB              (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR10 (0x10006000+0x068) */
+#define PCM_EVENT_VECTOR_10_LSB             (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_10_LSB             (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_10_LSB            (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_10_LSB             (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR11 (0x10006000+0x06C) */
+#define PCM_EVENT_VECTOR_11_LSB             (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_11_LSB             (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_11_LSB            (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_11_LSB             (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR12 (0x10006000+0x070) */
+#define PCM_EVENT_VECTOR_12_LSB             (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_12_LSB             (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_12_LSB            (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_12_LSB             (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR13 (0x10006000+0x074) */
+#define PCM_EVENT_VECTOR_13_LSB             (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_13_LSB             (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_13_LSB            (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_13_LSB             (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR14 (0x10006000+0x078) */
+#define PCM_EVENT_VECTOR_14_LSB             (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_14_LSB             (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_14_LSB            (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_14_LSB             (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR15 (0x10006000+0x07C) */
+#define PCM_EVENT_VECTOR_15_LSB             (1U << 0)       /* 6b */
+#define PCM_EVENT_RESUME_15_LSB             (1U << 6)       /* 1b */
+#define PCM_EVENT_IMMEDIA_15_LSB            (1U << 7)       /* 1b */
+#define PCM_EVENT_VECTPC_15_LSB             (1U << 16)      /* 11b */
+/* PCM_EVENT_VECTOR_EN (0x10006000+0x080) */
+#define PCM_EVENT_VECTOR_EN_LSB             (1U << 0)       /* 16b */
+/* SPM_SRAM_RSV_CON (0x10006000+0x088) */
+#define SPM_SRAM_SLEEP_B_ECO_EN_LSB         (1U << 0)       /* 1b */
+/* SPM_SWINT (0x10006000+0x08C) */
+#define SPM_SWINT_LSB                       (1U << 0)       /* 10b */
+/* SPM_SWINT_SET (0x10006000+0x090) */
+#define SPM_SWINT_SET_LSB                   (1U << 0)       /* 10b */
+/* SPM_SWINT_CLR (0x10006000+0x094) */
+#define SPM_SWINT_CLR_LSB                   (1U << 0)       /* 10b */
+/* SPM_SCP_MAILBOX (0x10006000+0x098) */
+#define SPM_SCP_MAILBOX_LSB                 (1U << 0)       /* 32b */
+/* SCP_SPM_MAILBOX (0x10006000+0x09C) */
+#define SCP_SPM_MAILBOX_LSB                 (1U << 0)       /* 32b */
+/* SPM_TWAM_CON (0x10006000+0x0A0) */
+#define TWAM_ENABLE_LSB                     (1U << 0)       /* 1b */
+#define TWAM_SPEED_MODE_ENABLE_LSB          (1U << 1)       /* 1b */
+#define TWAM_SW_RST_LSB                     (1U << 2)       /* 1b */
+#define TWAM_MON_TYPE0_LSB                  (1U << 4)       /* 2b */
+#define TWAM_MON_TYPE1_LSB                  (1U << 6)       /* 2b */
+#define TWAM_MON_TYPE2_LSB                  (1U << 8)       /* 2b */
+#define TWAM_MON_TYPE3_LSB                  (1U << 10)      /* 2b */
+#define TWAM_SIGNAL_SEL0_LSB                (1U << 12)      /* 5b */
+#define TWAM_SIGNAL_SEL1_LSB                (1U << 17)      /* 5b */
+#define TWAM_SIGNAL_SEL2_LSB                (1U << 22)      /* 5b */
+#define TWAM_SIGNAL_SEL3_LSB                (1U << 27)      /* 5b */
+/* SPM_TWAM_WINDOW_LEN (0x10006000+0x0A4) */
+#define TWAM_WINDOW_LEN_LSB                 (1U << 0)       /* 32b */
+/* SPM_TWAM_IDLE_SEL (0x10006000+0x0A8) */
+#define TWAM_IDLE_SEL_LSB                   (1U << 0)       /* 5b */
+/* SPM_SCP_IRQ (0x10006000+0x0AC) */
+#define SPM_SCP_IRQ_LSB                     (1U << 0)       /* 1b */
+#define SPM_SCP_IRQ_SEL_LSB                 (1U << 4)       /* 1b */
+/* SPM_CPU_WAKEUP_EVENT (0x10006000+0x0B0) */
+#define SPM_CPU_WAKEUP_EVENT_LSB            (1U << 0)       /* 1b */
+/* SPM_IRQ_MASK (0x10006000+0x0B4) */
+#define SPM_TWAM_IRQ_MASK_LSB               (1U << 2)       /* 1b */
+#define PCM_IRQ_ROOT_MASK_LSB               (1U << 3)       /* 1b */
+#define SPM_IRQ_MASK_LSB                    (1U << 8)       /* 10b */
+/* SPM_SRC_REQ (0x10006000+0x0B8) */
+#define SPM_APSRC_REQ_LSB                   (1U << 0)       /* 1b */
+#define SPM_F26M_REQ_LSB                    (1U << 1)       /* 1b */
+#define SPM_INFRA_REQ_LSB                   (1U << 3)       /* 1b */
+#define SPM_VRF18_REQ_LSB                   (1U << 4)       /* 1b */
+#define SPM_DDREN_REQ_LSB                   (1U << 7)       /* 1b */
+#define SPM_RSV_SRC_REQ_LSB                 (1U << 8)       /* 3b */
+#define SPM_DDREN_2_REQ_LSB                 (1U << 11)      /* 1b */
+#define CPU_MD_DVFS_SOP_FORCE_ON_LSB        (1U << 16)      /* 1b */
+/* SPM_SRC_MASK (0x10006000+0x0BC) */
+#define CSYSPWREQ_MASK_LSB                  (1U << 0)       /* 1b */
+#define CCIF0_MD_EVENT_MASK_B_LSB           (1U << 1)       /* 1b */
+#define CCIF0_AP_EVENT_MASK_B_LSB           (1U << 2)       /* 1b */
+#define CCIF1_MD_EVENT_MASK_B_LSB           (1U << 3)       /* 1b */
+#define CCIF1_AP_EVENT_MASK_B_LSB           (1U << 4)       /* 1b */
+#define CCIF2_MD_EVENT_MASK_B_LSB           (1U << 5)       /* 1b */
+#define CCIF2_AP_EVENT_MASK_B_LSB           (1U << 6)       /* 1b */
+#define CCIF3_MD_EVENT_MASK_B_LSB           (1U << 7)       /* 1b */
+#define CCIF3_AP_EVENT_MASK_B_LSB           (1U << 8)       /* 1b */
+#define MD_SRCCLKENA_0_INFRA_MASK_B_LSB     (1U << 9)       /* 1b */
+#define MD_SRCCLKENA_1_INFRA_MASK_B_LSB     (1U << 10)      /* 1b */
+#define CONN_SRCCLKENA_INFRA_MASK_B_LSB     (1U << 11)      /* 1b */
+#define UFS_INFRA_REQ_MASK_B_LSB            (1U << 12)      /* 1b */
+#define SRCCLKENI_INFRA_MASK_B_LSB          (1U << 13)      /* 1b */
+#define MD_APSRC_REQ_0_INFRA_MASK_B_LSB     (1U << 14)      /* 1b */
+#define MD_APSRC_REQ_1_INFRA_MASK_B_LSB     (1U << 15)      /* 1b */
+#define CONN_APSRCREQ_INFRA_MASK_B_LSB      (1U << 16)      /* 1b */
+#define UFS_SRCCLKENA_MASK_B_LSB            (1U << 17)      /* 1b */
+#define MD_VRF18_REQ_0_MASK_B_LSB           (1U << 18)      /* 1b */
+#define MD_VRF18_REQ_1_MASK_B_LSB           (1U << 19)      /* 1b */
+#define UFS_VRF18_REQ_MASK_B_LSB            (1U << 20)      /* 1b */
+#define GCE_VRF18_REQ_MASK_B_LSB            (1U << 21)      /* 1b */
+#define CONN_INFRA_REQ_MASK_B_LSB           (1U << 22)      /* 1b */
+#define GCE_APSRC_REQ_MASK_B_LSB            (1U << 23)      /* 1b */
+#define DISP0_APSRC_REQ_MASK_B_LSB          (1U << 24)      /* 1b */
+#define DISP1_APSRC_REQ_MASK_B_LSB          (1U << 25)      /* 1b */
+#define MFG_REQ_MASK_B_LSB                  (1U << 26)      /* 1b */
+#define VDEC_REQ_MASK_B_LSB                 (1U << 27)      /* 1b */
+/* SPM_SRC2_MASK (0x10006000+0x0C0) */
+#define MD_DDR_EN_0_MASK_B_LSB              (1U << 0)       /* 1b */
+#define MD_DDR_EN_1_MASK_B_LSB              (1U << 1)       /* 1b */
+#define CONN_DDR_EN_MASK_B_LSB              (1U << 2)       /* 1b */
+#define DDREN_SSPM_APSRC_REQ_MASK_B_LSB     (1U << 3)       /* 1b */
+#define DDREN_SCP_APSRC_REQ_MASK_B_LSB      (1U << 4)       /* 1b */
+#define DISP0_DDREN_MASK_B_LSB              (1U << 5)       /* 1b */
+#define DISP1_DDREN_MASK_B_LSB              (1U << 6)       /* 1b */
+#define GCE_DDREN_MASK_B_LSB                (1U << 7)       /* 1b */
+#define DDREN_EMI_SELF_REFRESH_CH0_MASK_B_LSB (1U << 8)       /* 1b */
+#define DDREN_EMI_SELF_REFRESH_CH1_MASK_B_LSB (1U << 9)       /* 1b */
+/* SPM_WAKEUP_EVENT_MASK (0x10006000+0x0C4) */
+#define SPM_WAKEUP_EVENT_MASK_LSB           (1U << 0)       /* 32b */
+/* SPM_WAKEUP_EVENT_EXT_MASK (0x10006000+0x0C8) */
+#define SPM_WAKEUP_EVENT_EXT_MASK_LSB       (1U << 0)       /* 32b */
+/* SPM_TWAM_EVENT_CLEAR (0x10006000+0x0CC) */
+#define SPM_TWAM_EVENT_CLEAR_LSB            (1U << 0)       /* 1b */
+/* SCP_CLK_CON (0x10006000+0x0D0) */
+#define SCP_26M_CK_SEL_LSB                  (1U << 0)       /* 1b */
+#define SCP_SECURE_V_REQ_MASK_LSB           (1U << 1)       /* 1b */
+#define SCP_SLP_REQ_LSB                     (1U << 2)       /* 1b */
+#define SCP_SLP_ACK_LSB                     (1U << 3)       /* 1b */
+/* PCM_DEBUG_CON (0x10006000+0x0D4) */
+#define PCM_DEBUG_OUT_ENABLE_LSB            (1U << 0)       /* 1b */
+/* DDR_EN_DBC_LEN (0x10006000+0x0D8) */
+#define MD_DDR_EN_0_DBC_LEN_LSB             (1U << 0)       /* 10b */
+#define MD_DDR_EN_1_DBC_LEN_LSB             (1U << 10)      /* 10b */
+#define CONN_DDR_EN_DBC_LEN_LSB             (1U << 20)      /* 10b */
+/* AHB_BUS_CON (0x10006000+0x0DC) */
+#define AHB_HADDR_EXT_LSB                   (1U << 0)       /* 2b */
+#define REG_AHB_LOCK_LSB                    (1U << 8)       /* 1b */
+/* SPM_SRC3_MASK (0x10006000+0x0E0) */
+#define MD_DDR_EN_2_0_MASK_B_LSB            (1U << 0)       /* 1b */
+#define MD_DDR_EN_2_1_MASK_B_LSB            (1U << 1)       /* 1b */
+#define CONN_DDR_EN_2_MASK_B_LSB            (1U << 2)       /* 1b */
+#define DDREN2_SSPM_APSRC_REQ_MASK_B_LSB    (1U << 3)       /* 1b */
+#define DDREN2_SCP_APSRC_REQ_MASK_B_LSB     (1U << 4)       /* 1b */
+#define DISP0_DDREN2_MASK_B_LSB             (1U << 5)       /* 1b */
+#define DISP1_DDREN2_MASK_B_LSB             (1U << 6)       /* 1b */
+#define GCE_DDREN2_MASK_B_LSB               (1U << 7)       /* 1b */
+#define DDREN2_EMI_SELF_REFRESH_CH0_MASK_B_LSB (1U << 8)       /* 1b */
+#define DDREN2_EMI_SELF_REFRESH_CH1_MASK_B_LSB (1U << 9)       /* 1b */
+/* DDR_EN_EMI_DBC_CON (0x10006000+0x0E4) */
+#define EMI_SELF_REFRESH_CH0_DBC_LEN_LSB    (1U << 0)       /* 10b */
+#define EMI_SELF_REFRESH_CH0_DBC_EN_LSB     (1U << 10)      /* 1b */
+#define EMI_SELF_REFRESH_CH1_DBC_LEN_LSB    (1U << 16)      /* 10b */
+#define EMI_SELF_REFRESH_CH1_DBC_EN_LSB     (1U << 26)      /* 1b */
+/* SSPM_CLK_CON (0x10006000+0x0E8) */
+#define SSPM_26M_CK_SEL_LSB                 (1U << 0)       /* 1b */
+/* PCM_REG0_DATA (0x10006000+0x100) */
+#define PCM_REG0_DATA_LSB                   (1U << 0)       /* 32b */
+/* PCM_REG1_DATA (0x10006000+0x104) */
+#define PCM_REG1_DATA_LSB                   (1U << 0)       /* 32b */
+/* PCM_REG2_DATA (0x10006000+0x108) */
+#define PCM_REG2_DATA_LSB                   (1U << 0)       /* 32b */
+/* PCM_REG3_DATA (0x10006000+0x10C) */
+#define PCM_REG3_DATA_LSB                   (1U << 0)       /* 32b */
+/* PCM_REG4_DATA (0x10006000+0x110) */
+#define PCM_REG4_DATA_LSB                   (1U << 0)       /* 32b */
+/* PCM_REG5_DATA (0x10006000+0x114) */
+#define PCM_REG5_DATA_LSB                   (1U << 0)       /* 32b */
+/* PCM_REG6_DATA (0x10006000+0x118) */
+#define PCM_REG6_DATA_LSB                   (1U << 0)       /* 32b */
+/* PCM_REG7_DATA (0x10006000+0x11C) */
+#define PCM_REG7_DATA_LSB                   (1U << 0)       /* 32b */
+/* PCM_REG8_DATA (0x10006000+0x120) */
+#define PCM_REG8_DATA_LSB                   (1U << 0)       /* 32b */
+/* PCM_REG9_DATA (0x10006000+0x124) */
+#define PCM_REG9_DATA_LSB                   (1U << 0)       /* 32b */
+/* PCM_REG10_DATA (0x10006000+0x128) */
+#define PCM_REG10_DATA_LSB                  (1U << 0)       /* 32b */
+/* PCM_REG11_DATA (0x10006000+0x12C) */
+#define PCM_REG11_DATA_LSB                  (1U << 0)       /* 32b */
+/* PCM_REG12_DATA (0x10006000+0x130) */
+#define PCM_REG12_DATA_LSB                  (1U << 0)       /* 32b */
+/* PCM_REG13_DATA (0x10006000+0x134) */
+#define PCM_REG13_DATA_LSB                  (1U << 0)       /* 32b */
+/* PCM_REG14_DATA (0x10006000+0x138) */
+#define PCM_REG14_DATA_LSB                  (1U << 0)       /* 32b */
+/* PCM_REG15_DATA (0x10006000+0x13C) */
+#define PCM_REG15_DATA_LSB                  (1U << 0)       /* 32b */
+/* PCM_REG12_MASK_B_STA (0x10006000+0x140) */
+#define PCM_REG12_MASK_B_STA_LSB            (1U << 0)       /* 32b */
+/* PCM_REG12_EXT_DATA (0x10006000+0x144) */
+#define PCM_REG12_EXT_DATA_LSB              (1U << 0)       /* 32b */
+/* PCM_REG12_EXT_MASK_B_STA (0x10006000+0x148) */
+#define PCM_REG12_EXT_MASK_B_STA_LSB        (1U << 0)       /* 32b */
+/* PCM_EVENT_REG_STA (0x10006000+0x14C) */
+#define PCM_EVENT_REG_STA_LSB               (1U << 0)       /* 32b */
+/* PCM_TIMER_OUT (0x10006000+0x150) */
+#define PCM_TIMER_OUT_LSB                   (1U << 0)       /* 32b */
+/* PCM_WDT_OUT (0x10006000+0x154) */
+#define PCM_WDT_OUT_LSB                     (1U << 0)       /* 32b */
+/* SPM_IRQ_STA (0x10006000+0x158) */
+#define SPM_ACK_CHK_WAKEUP_LSB              (1U << 1)       /* 1b */
+#define TWAM_IRQ_LSB                        (1U << 2)       /* 1b */
+#define PCM_IRQ_LSB                         (1U << 3)       /* 1b */
+/* #define SPM_SWINT_LSB                    (1U << 4) */       /* 10b */
+/* SPM_WAKEUP_STA (0x10006000+0x15C) */
+#define SPM_WAKEUP_EVENT_STA_LSB            (1U << 0)       /* 32b */
+/* SPM_WAKEUP_EXT_STA (0x10006000+0x160) */
+#define SPM_WAKEUP_EVENT_EXT_STA_LSB        (1U << 0)       /* 32b */
+/* SPM_WAKEUP_MISC (0x10006000+0x164) */
+#define SPM_WAKEUP_EVENT_MISC_LSB           (1U << 0)       /* 30b */
+#define SPM_PWRAP_IRQ_ACK_LSB               (1U << 30)      /* 1b */
+#define SPM_PWRAP_IRQ_LSB                   (1U << 31)      /* 1b */
+/* BUS_PROTECT_RDY (0x10006000+0x168) */
+#define BUS_PROTECT_RDY_LSB                 (1U << 0)       /* 32b */
+/* BUS_PROTECT2_RDY (0x10006000+0x16C) */
+#define BUS_PROTECT2_RDY_LSB                (1U << 0)       /* 32b */
+/* SUBSYS_IDLE_STA (0x10006000+0x170) */
+#define SUBSYS_IDLE_STA_LSB                 (1U << 0)       /* 32b */
+/* CPU_IDLE_STA (0x10006000+0x174) */
+#define MP0_CPU0_STANDBYWFI_AFTER_SEL_LSB   (1U << 0)       /* 1b */
+#define MP0_CPU1_STANDBYWFI_AFTER_SEL_LSB   (1U << 1)       /* 1b */
+#define MP0_CPU2_STANDBYWFI_AFTER_SEL_LSB   (1U << 2)       /* 1b */
+#define MP0_CPU3_STANDBYWFI_AFTER_SEL_LSB   (1U << 3)       /* 1b */
+#define MP1_CPU0_STANDBYWFI_AFTER_SEL_LSB   (1U << 4)       /* 1b */
+#define MP1_CPU1_STANDBYWFI_AFTER_SEL_LSB   (1U << 5)       /* 1b */
+#define MP1_CPU2_STANDBYWFI_AFTER_SEL_LSB   (1U << 6)       /* 1b */
+#define MP1_CPU3_STANDBYWFI_AFTER_SEL_LSB   (1U << 7)       /* 1b */
+#define MP0_CPU0_STANDBYWFI_LSB             (1U << 10)      /* 1b */
+#define MP0_CPU1_STANDBYWFI_LSB             (1U << 11)      /* 1b */
+#define MP0_CPU2_STANDBYWFI_LSB             (1U << 12)      /* 1b */
+#define MP0_CPU3_STANDBYWFI_LSB             (1U << 13)      /* 1b */
+#define MP1_CPU0_STANDBYWFI_LSB             (1U << 14)      /* 1b */
+#define MP1_CPU1_STANDBYWFI_LSB             (1U << 15)      /* 1b */
+#define MP1_CPU2_STANDBYWFI_LSB             (1U << 16)      /* 1b */
+#define MP1_CPU3_STANDBYWFI_LSB             (1U << 17)      /* 1b */
+#define MP0_CPUTOP_IDLE_LSB                 (1U << 20)      /* 1b */
+#define MP1_CPUTOP_IDLE_LSB                 (1U << 21)      /* 1b */
+#define MCU_BIU_IDLE_LSB                    (1U << 22)      /* 1b */
+#define MCUSYS_IDLE_LSB                     (1U << 23)      /* 1b */
+/* PCM_FSM_STA (0x10006000+0x178) */
+#define EXEC_INST_OP_LSB                    (1U << 0)       /* 4b */
+#define PC_STATE_LSB                        (1U << 4)       /* 3b */
+#define IM_STATE_LSB                        (1U << 7)       /* 3b */
+#define MASTER_STATE_LSB                    (1U << 10)      /* 5b */
+#define EVENT_FSM_LSB                       (1U << 15)      /* 3b */
+#define PCM_CLK_SEL_STA_LSB                 (1U << 18)      /* 3b */
+#define PCM_KICK_LSB                        (1U << 21)      /* 1b */
+#define IM_KICK_LSB                         (1U << 22)      /* 1b */
+#define EXT_SRCCLKEN_STA_LSB                (1U << 23)      /* 2b */
+#define EXT_SRCVOLTEN_STA_LSB               (1U << 25)      /* 1b */
+/* SRC_REQ_STA (0x10006000+0x17C) */
+#define SRC_REQ_STA_LSB                     (1U << 0)       /* 32b */
+/* PWR_STATUS (0x10006000+0x180) */
+#define PWR_STATUS_LSB                      (1U << 0)       /* 32b */
+/* PWR_STATUS_2ND (0x10006000+0x184) */
+#define PWR_STATUS_2ND_LSB                  (1U << 0)       /* 32b */
+/* CPU_PWR_STATUS (0x10006000+0x188) */
+#define CPU_PWR_STATUS_LSB                  (1U << 0)       /* 32b */
+/* CPU_PWR_STATUS_2ND (0x10006000+0x18C) */
+#define CPU_PWR_STATUS_2ND_LSB              (1U << 0)       /* 32b */
+/* MISC_STA (0x10006000+0x190) */
+#define MM_DVFS_HALT_AF_MASK_LSB            (1U << 0)       /* 5b */
+/* SPM_SRC_RDY_STA (0x10006000+0x194) */
+#define SPM_INFRA_SRC_ACK_LSB               (1U << 0)       /* 1b */
+#define SPM_VRF18_SRC_ACK_LSB               (1U << 1)       /* 1b */
+/* DRAMC_DBG_LATCH (0x10006000+0x19C) */
+#define DRAMC_DEBUG_LATCH_STATUS_LSB        (1U << 0)       /* 32b */
+/* SPM_TWAM_LAST_STA0 (0x10006000+0x1A0) */
+#define SPM_TWAM_LAST_STA0_LSB              (1U << 0)       /* 32b */
+/* SPM_TWAM_LAST_STA1 (0x10006000+0x1A4) */
+#define SPM_TWAM_LAST_STA1_LSB              (1U << 0)       /* 32b */
+/* SPM_TWAM_LAST_STA2 (0x10006000+0x1A8) */
+#define SPM_TWAM_LAST_STA2_LSB              (1U << 0)       /* 32b */
+/* SPM_TWAM_LAST_STA3 (0x10006000+0x1AC) */
+#define SPM_TWAM_LAST_STA3_LSB              (1U << 0)       /* 32b */
+/* SPM_TWAM_CURR_STA0 (0x10006000+0x1B0) */
+#define SPM_TWAM_CURR_STA0_LSB              (1U << 0)       /* 32b */
+/* SPM_TWAM_CURR_STA1 (0x10006000+0x1B4) */
+#define SPM_TWAM_CURR_STA1_LSB              (1U << 0)       /* 32b */
+/* SPM_TWAM_CURR_STA2 (0x10006000+0x1B8) */
+#define SPM_TWAM_CURR_STA2_LSB              (1U << 0)       /* 32b */
+/* SPM_TWAM_CURR_STA3 (0x10006000+0x1BC) */
+#define SPM_TWAM_CURR_STA3_LSB              (1U << 0)       /* 32b */
+/* SPM_TWAM_TIMER_OUT (0x10006000+0x1C0) */
+#define SPM_TWAM_TIMER_OUT_LSB              (1U << 0)       /* 32b */
+/* SPM_DVFS_STA (0x10006000+0x1C8) */
+#define MD_DVFS_ERROR_STATUS_LSB            (1U << 0)       /* 1b */
+/* BUS_PROTECT3_RDY (0x10006000+0x1CC) */
+#define BUS_PROTECT_MM_RDY_LSB              (1U << 0)       /* 16b */
+#define BUS_PROTECT_MCU_RDY_LSB             (1U << 16)      /* 16b */
+/* SRC_DDREN_STA (0x10006000+0x1E0) */
+#define SRC_DDREN_STA_LSB                   (1U << 0)       /* 32b */
+/* MCU_PWR_CON (0x10006000+0x200) */
+#define MCU_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
+#define MCU_PWR_ISO_LSB                     (1U << 1)       /* 1b */
+#define MCU_PWR_ON_LSB                      (1U << 2)       /* 1b */
+#define MCU_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
+#define MCU_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
+#define MCU_SRAM_CKISO_LSB                  (1U << 5)       /* 1b */
+#define MCU_SRAM_ISOINT_B_LSB               (1U << 6)       /* 1b */
+#define MCU_SRAM_PD_SLPB_CLAMP_LSB          (1U << 7)       /* 1b */
+#define MCU_SRAM_PDN_LSB                    (1U << 8)       /* 1b */
+#define MCU_SRAM_SLEEP_B_LSB                (1U << 12)      /* 1b */
+#define SC_MCU_SRAM_PDN_ACK_LSB             (1U << 24)      /* 1b */
+#define SC_MCU_SRAM_SLEEP_B_ACK_LSB         (1U << 28)      /* 1b */
+/* MP0_CPUTOP_PWR_CON (0x10006000+0x204) */
+#define MP0_CPUTOP_PWR_RST_B_LSB            (1U << 0)       /* 1b */
+#define MP0_CPUTOP_PWR_ISO_LSB              (1U << 1)       /* 1b */
+#define MP0_CPUTOP_PWR_ON_LSB               (1U << 2)       /* 1b */
+#define MP0_CPUTOP_PWR_ON_2ND_LSB           (1U << 3)       /* 1b */
+#define MP0_CPUTOP_PWR_CLK_DIS_LSB          (1U << 4)       /* 1b */
+#define MP0_CPUTOP_SRAM_CKISO_LSB           (1U << 5)       /* 1b */
+#define MP0_CPUTOP_SRAM_ISOINT_B_LSB        (1U << 6)       /* 1b */
+#define MP0_CPUTOP_SRAM_PD_SLPB_CLAMP_LSB   (1U << 7)       /* 1b */
+#define MP0_CPUTOP_SRAM_PDN_LSB             (1U << 8)       /* 1b */
+#define MP0_CPUTOP_SRAM_SLEEP_B_LSB         (1U << 12)      /* 1b */
+#define SC_MP0_CPUTOP_SRAM_PDN_ACK_LSB      (1U << 24)      /* 1b */
+#define SC_MP0_CPUTOP_SRAM_SLEEP_B_ACK_LSB  (1U << 28)      /* 1b */
+/* MP0_CPU0_PWR_CON (0x10006000+0x208) */
+#define MP0_CPU0_PWR_RST_B_LSB              (1U << 0)       /* 1b */
+#define MP0_CPU0_PWR_ISO_LSB                (1U << 1)       /* 1b */
+#define MP0_CPU0_PWR_ON_LSB                 (1U << 2)       /* 1b */
+#define MP0_CPU0_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
+#define MP0_CPU0_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
+#define MP0_CPU0_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
+#define MP0_CPU0_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
+#define MP0_CPU0_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
+#define MP0_CPU0_SRAM_PDN_LSB               (1U << 8)       /* 1b */
+#define MP0_CPU0_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
+#define SC_MP0_CPU0_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
+#define SC_MP0_CPU0_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
+/* MP0_CPU1_PWR_CON (0x10006000+0x20C) */
+#define MP0_CPU1_PWR_RST_B_LSB              (1U << 0)       /* 1b */
+#define MP0_CPU1_PWR_ISO_LSB                (1U << 1)       /* 1b */
+#define MP0_CPU1_PWR_ON_LSB                 (1U << 2)       /* 1b */
+#define MP0_CPU1_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
+#define MP0_CPU1_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
+#define MP0_CPU1_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
+#define MP0_CPU1_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
+#define MP0_CPU1_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
+#define MP0_CPU1_SRAM_PDN_LSB               (1U << 8)       /* 1b */
+#define MP0_CPU1_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
+#define SC_MP0_CPU1_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
+#define SC_MP0_CPU1_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
+/* MP0_CPU2_PWR_CON (0x10006000+0x210) */
+#define MP0_CPU2_PWR_RST_B_LSB              (1U << 0)       /* 1b */
+#define MP0_CPU2_PWR_ISO_LSB                (1U << 1)       /* 1b */
+#define MP0_CPU2_PWR_ON_LSB                 (1U << 2)       /* 1b */
+#define MP0_CPU2_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
+#define MP0_CPU2_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
+#define MP0_CPU2_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
+#define MP0_CPU2_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
+#define MP0_CPU2_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
+#define MP0_CPU2_SRAM_PDN_LSB               (1U << 8)       /* 1b */
+#define MP0_CPU2_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
+#define SC_MP0_CPU2_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
+#define SC_MP0_CPU2_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
+/* MP0_CPU3_PWR_CON (0x10006000+0x214) */
+#define MP0_CPU3_PWR_RST_B_LSB              (1U << 0)       /* 1b */
+#define MP0_CPU3_PWR_ISO_LSB                (1U << 1)       /* 1b */
+#define MP0_CPU3_PWR_ON_LSB                 (1U << 2)       /* 1b */
+#define MP0_CPU3_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
+#define MP0_CPU3_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
+#define MP0_CPU3_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
+#define MP0_CPU3_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
+#define MP0_CPU3_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
+#define MP0_CPU3_SRAM_PDN_LSB               (1U << 8)       /* 1b */
+#define MP0_CPU3_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
+#define SC_MP0_CPU3_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
+#define SC_MP0_CPU3_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
+/* MP1_CPUTOP_PWR_CON (0x10006000+0x218) */
+#define MP1_CPUTOP_PWR_RST_B_LSB            (1U << 0)       /* 1b */
+#define MP1_CPUTOP_PWR_ISO_LSB              (1U << 1)       /* 1b */
+#define MP1_CPUTOP_PWR_ON_LSB               (1U << 2)       /* 1b */
+#define MP1_CPUTOP_PWR_ON_2ND_LSB           (1U << 3)       /* 1b */
+#define MP1_CPUTOP_PWR_CLK_DIS_LSB          (1U << 4)       /* 1b */
+#define MP1_CPUTOP_SRAM_CKISO_LSB           (1U << 5)       /* 1b */
+#define MP1_CPUTOP_SRAM_ISOINT_B_LSB        (1U << 6)       /* 1b */
+#define MP1_CPUTOP_SRAM_PD_SLPB_CLAMP_LSB   (1U << 7)       /* 1b */
+#define MP1_CPUTOP_SRAM_PDN_LSB             (1U << 8)       /* 1b */
+#define MP1_CPUTOP_SRAM_SLEEP_B_LSB         (1U << 12)      /* 1b */
+#define SC_MP1_CPUTOP_SRAM_PDN_ACK_LSB      (1U << 24)      /* 1b */
+#define SC_MP1_CPUTOP_SRAM_SLEEP_B_ACK_LSB  (1U << 28)      /* 1b */
+/* MP1_CPU0_PWR_CON (0x10006000+0x21C) */
+#define MP1_CPU0_PWR_RST_B_LSB              (1U << 0)       /* 1b */
+#define MP1_CPU0_PWR_ISO_LSB                (1U << 1)       /* 1b */
+#define MP1_CPU0_PWR_ON_LSB                 (1U << 2)       /* 1b */
+#define MP1_CPU0_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
+#define MP1_CPU0_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
+#define MP1_CPU0_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
+#define MP1_CPU0_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
+#define MP1_CPU0_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
+#define MP1_CPU0_SRAM_PDN_LSB               (1U << 8)       /* 1b */
+#define MP1_CPU0_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
+#define SC_MP1_CPU0_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
+#define SC_MP1_CPU0_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
+/* MP1_CPU1_PWR_CON (0x10006000+0x220) */
+#define MP1_CPU1_PWR_RST_B_LSB              (1U << 0)       /* 1b */
+#define MP1_CPU1_PWR_ISO_LSB                (1U << 1)       /* 1b */
+#define MP1_CPU1_PWR_ON_LSB                 (1U << 2)       /* 1b */
+#define MP1_CPU1_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
+#define MP1_CPU1_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
+#define MP1_CPU1_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
+#define MP1_CPU1_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
+#define MP1_CPU1_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
+#define MP1_CPU1_SRAM_PDN_LSB               (1U << 8)       /* 1b */
+#define MP1_CPU1_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
+#define SC_MP1_CPU1_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
+#define SC_MP1_CPU1_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
+/* MP1_CPU2_PWR_CON (0x10006000+0x224) */
+#define MP1_CPU2_PWR_RST_B_LSB              (1U << 0)       /* 1b */
+#define MP1_CPU2_PWR_ISO_LSB                (1U << 1)       /* 1b */
+#define MP1_CPU2_PWR_ON_LSB                 (1U << 2)       /* 1b */
+#define MP1_CPU2_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
+#define MP1_CPU2_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
+#define MP1_CPU2_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
+#define MP1_CPU2_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
+#define MP1_CPU2_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
+#define MP1_CPU2_SRAM_PDN_LSB               (1U << 8)       /* 1b */
+#define MP1_CPU2_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
+#define SC_MP1_CPU2_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
+#define SC_MP1_CPU2_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
+/* MP1_CPU3_PWR_CON (0x10006000+0x228) */
+#define MP1_CPU3_PWR_RST_B_LSB              (1U << 0)       /* 1b */
+#define MP1_CPU3_PWR_ISO_LSB                (1U << 1)       /* 1b */
+#define MP1_CPU3_PWR_ON_LSB                 (1U << 2)       /* 1b */
+#define MP1_CPU3_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
+#define MP1_CPU3_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
+#define MP1_CPU3_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
+#define MP1_CPU3_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
+#define MP1_CPU3_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
+#define MP1_CPU3_SRAM_PDN_LSB               (1U << 8)       /* 1b */
+#define MP1_CPU3_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
+#define SC_MP1_CPU3_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
+#define SC_MP1_CPU3_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
+/* MP0_CPUTOP_L2_PDN (0x10006000+0x240) */
+#define MP0_CPUTOP_L2_SRAM_PDN_LSB          (1U << 0)       /* 1b */
+#define MP0_CPUTOP_L2_SRAM_PDN_ACK_LSB      (1U << 8)       /* 1b */
+/* MP0_CPUTOP_L2_SLEEP_B (0x10006000+0x244) */
+#define MP0_CPUTOP_L2_SRAM_SLEEP_B_LSB      (1U << 0)       /* 1b */
+#define MP0_CPUTOP_L2_SRAM_SLEEP_B_ACK_LSB  (1U << 8)       /* 1b */
+/* MP0_CPU0_L1_PDN (0x10006000+0x248) */
+#define MP0_CPU0_L1_PDN_LSB                 (1U << 0)       /* 1b */
+#define MP0_CPU0_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
+/* MP0_CPU1_L1_PDN (0x10006000+0x24C) */
+#define MP0_CPU1_L1_PDN_LSB                 (1U << 0)       /* 1b */
+#define MP0_CPU1_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
+/* MP0_CPU2_L1_PDN (0x10006000+0x250) */
+#define MP0_CPU2_L1_PDN_LSB                 (1U << 0)       /* 1b */
+#define MP0_CPU2_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
+/* MP0_CPU3_L1_PDN (0x10006000+0x254) */
+#define MP0_CPU3_L1_PDN_LSB                 (1U << 0)       /* 1b */
+#define MP0_CPU3_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
+/* MP1_CPUTOP_L2_PDN (0x10006000+0x258) */
+#define MP1_CPUTOP_L2_SRAM_PDN_LSB          (1U << 0)       /* 1b */
+#define MP1_CPUTOP_L2_SRAM_PDN_ACK_LSB      (1U << 8)       /* 1b */
+/* MP1_CPUTOP_L2_SLEEP_B (0x10006000+0x25C) */
+#define MP1_CPUTOP_L2_SRAM_SLEEP_B_LSB      (1U << 0)       /* 1b */
+#define MP1_CPUTOP_L2_SRAM_SLEEP_B_ACK_LSB  (1U << 8)       /* 1b */
+/* MP1_CPU0_L1_PDN (0x10006000+0x260) */
+#define MP1_CPU0_L1_PDN_LSB                 (1U << 0)       /* 1b */
+#define MP1_CPU0_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
+/* MP1_CPU1_L1_PDN (0x10006000+0x264) */
+#define MP1_CPU1_L1_PDN_LSB                 (1U << 0)       /* 1b */
+#define MP1_CPU1_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
+/* MP1_CPU2_L1_PDN (0x10006000+0x268) */
+#define MP1_CPU2_L1_PDN_LSB                 (1U << 0)       /* 1b */
+#define MP1_CPU2_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
+/* MP1_CPU3_L1_PDN (0x10006000+0x26C) */
+#define MP1_CPU3_L1_PDN_LSB                 (1U << 0)       /* 1b */
+#define MP1_CPU3_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
+/* CPU_EXT_BUCK_ISO (0x10006000+0x290) */
+#define MP0_EXT_BUCK_ISO_LSB                (1U << 0)       /* 1b */
+#define MP1_EXT_BUCK_ISO_LSB                (1U << 1)       /* 1b */
+#define MP_EXT_BUCK_ISO_LSB                 (1U << 2)       /* 1b */
+/* DUMMY1_PWR_CON (0x10006000+0x2B0) */
+#define DUMMY1_PWR_RST_B_LSB                (1U << 0)       /* 1b */
+#define DUMMY1_PWR_ISO_LSB                  (1U << 1)       /* 1b */
+#define DUMMY1_PWR_ON_LSB                   (1U << 2)       /* 1b */
+#define DUMMY1_PWR_ON_2ND_LSB               (1U << 3)       /* 1b */
+#define DUMMY1_PWR_CLK_DIS_LSB              (1U << 4)       /* 1b */
+/* BYPASS_SPMC (0x10006000+0x2B4) */
+#define BYPASS_CPU_SPMC_MODE_LSB            (1U << 0)       /* 1b */
+/* SPMC_DORMANT_ENABLE (0x10006000+0x2B8) */
+#define MP0_SPMC_SRAM_DORMANT_EN_LSB        (1U << 0)       /* 1b */
+#define MP1_SPMC_SRAM_DORMANT_EN_LSB        (1U << 1)       /* 1b */
+/* ARMPLL_CLK_CON (0x10006000+0x2BC) */
+#define REG_SC_ARM_FHC_PAUSE_LSB            (1U << 0)       /* 3b */
+#define REG_SC_ARM_CLK_OFF_LSB              (1U << 3)       /* 3b */
+#define REG_SC_ARMPLLOUT_OFF_LSB            (1U << 6)       /* 3b */
+#define REG_SC_ARMPLL_OFF_LSB               (1U << 9)       /* 3b */
+#define REG_SC_ARMPLL_S_OFF_LSB             (1U << 12)      /* 3b */
+/* SPMC_IN_RET (0x10006000+0x2C0) */
+#define SPMC_STATUS_LSB                     (1U << 0)       /* 8b */
+/* VDE_PWR_CON (0x10006000+0x300) */
+#define VDE_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
+#define VDE_PWR_ISO_LSB                     (1U << 1)       /* 1b */
+#define VDE_PWR_ON_LSB                      (1U << 2)       /* 1b */
+#define VDE_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
+#define VDE_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
+#define VDE_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
+#define VDE_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
+/* VEN_PWR_CON (0x10006000+0x304) */
+#define VEN_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
+#define VEN_PWR_ISO_LSB                     (1U << 1)       /* 1b */
+#define VEN_PWR_ON_LSB                      (1U << 2)       /* 1b */
+#define VEN_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
+#define VEN_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
+#define VEN_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
+#define VEN_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
+/* ISP_PWR_CON (0x10006000+0x308) */
+#define ISP_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
+#define ISP_PWR_ISO_LSB                     (1U << 1)       /* 1b */
+#define ISP_PWR_ON_LSB                      (1U << 2)       /* 1b */
+#define ISP_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
+#define ISP_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
+#define ISP_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
+#define ISP_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
+/* DIS_PWR_CON (0x10006000+0x30C) */
+#define DIS_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
+#define DIS_PWR_ISO_LSB                     (1U << 1)       /* 1b */
+#define DIS_PWR_ON_LSB                      (1U << 2)       /* 1b */
+#define DIS_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
+#define DIS_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
+#define DIS_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
+#define DIS_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
+/* MFG_CORE1_PWR_CON (0x10006000+0x310) */
+#define MFG_CORE1_PWR_RST_B_LSB             (1U << 0)       /* 1b */
+#define MFG_CORE1_PWR_ISO_LSB               (1U << 1)       /* 1b */
+#define MFG_CORE1_PWR_ON_LSB                (1U << 2)       /* 1b */
+#define MFG_CORE1_PWR_ON_2ND_LSB            (1U << 3)       /* 1b */
+#define MFG_CORE1_PWR_CLK_DIS_LSB           (1U << 4)       /* 1b */
+#define MFG_CORE1_SRAM_PDN_LSB              (1U << 8)       /* 4b */
+#define MFG_CORE1_SRAM_PDN_ACK_LSB          (1U << 12)      /* 4b */
+/* AUDIO_PWR_CON (0x10006000+0x314) */
+#define AUD_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
+#define AUD_PWR_ISO_LSB                     (1U << 1)       /* 1b */
+#define AUD_PWR_ON_LSB                      (1U << 2)       /* 1b */
+#define AUD_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
+#define AUD_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
+#define AUD_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
+#define AUD_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
+/* IFR_PWR_CON (0x10006000+0x318) */
+#define IFR_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
+#define IFR_PWR_ISO_LSB                     (1U << 1)       /* 1b */
+#define IFR_PWR_ON_LSB                      (1U << 2)       /* 1b */
+#define IFR_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
+#define IFR_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
+#define IFR_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
+#define IFR_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
+/* DPY_PWR_CON (0x10006000+0x31C) */
+#define DPY_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
+#define DPY_PWR_ISO_LSB                     (1U << 1)       /* 1b */
+#define DPY_PWR_ON_LSB                      (1U << 2)       /* 1b */
+#define DPY_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
+#define DPY_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
+#define DPY_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
+#define DPY_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
+/* MD1_PWR_CON (0x10006000+0x320) */
+#define MD1_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
+#define MD1_PWR_ISO_LSB                     (1U << 1)       /* 1b */
+#define MD1_PWR_ON_LSB                      (1U << 2)       /* 1b */
+#define MD1_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
+#define MD1_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
+#define MD1_SRAM_PDN_LSB                    (1U << 8)       /* 1b */
+/* VPU_TOP_PWR_CON (0x10006000+0x324) */
+#define VPU_TOP_PWR_RST_B_LSB               (1U << 0)       /* 1b */
+#define VPU_TOP_PWR_ISO_LSB                 (1U << 1)       /* 1b */
+#define VPU_TOP_PWR_ON_LSB                  (1U << 2)       /* 1b */
+#define VPU_TOP_PWR_ON_2ND_LSB              (1U << 3)       /* 1b */
+#define VPU_TOP_PWR_CLK_DIS_LSB             (1U << 4)       /* 1b */
+#define VPU_TOP_SRAM_CKISO_LSB              (1U << 5)       /* 1b */
+#define VPU_TOP_SRAM_ISOINT_B_LSB           (1U << 6)       /* 1b */
+#define VPU_TOP_SRAM_PDN_LSB                (1U << 8)       /* 4b */
+#define VPU_TOP_SRAM_PDN_ACK_LSB            (1U << 12)      /* 4b */
+#define VPU_TOP_SRAM_SLPB_LSB               (1U << 16)      /* 4b */
+#define VPU_TOP_SRAM_SLPB_ACK_LSB           (1U << 28)      /* 4b */
+/* CONN_PWR_CON (0x10006000+0x32C) */
+#define CONN_PWR_RST_B_LSB                  (1U << 0)       /* 1b */
+#define CONN_PWR_ISO_LSB                    (1U << 1)       /* 1b */
+#define CONN_PWR_ON_LSB                     (1U << 2)       /* 1b */
+#define CONN_PWR_ON_2ND_LSB                 (1U << 3)       /* 1b */
+#define CONN_PWR_CLK_DIS_LSB                (1U << 4)       /* 1b */
+#define CONN_SRAM_PDN_LSB                   (1U << 8)       /* 1b */
+#define CONN_SRAM_PDN_ACK_LSB               (1U << 12)      /* 1b */
+/* VPU_CORE2_PWR_CON (0x10006000+0x330) */
+#define VPU_CORE2_PWR_RST_B_LSB             (1U << 0)       /* 1b */
+#define VPU_CORE2_PWR_ISO_LSB               (1U << 1)       /* 1b */
+#define VPU_CORE2_PWR_ON_LSB                (1U << 2)       /* 1b */
+#define VPU_CORE2_PWR_ON_2ND_LSB            (1U << 3)       /* 1b */
+#define VPU_CORE2_PWR_CLK_DIS_LSB           (1U << 4)       /* 1b */
+#define VPU_CORE2_SRAM_CKISO_LSB            (1U << 5)       /* 1b */
+#define VPU_CORE2_SRAM_ISOINT_B_LSB         (1U << 6)       /* 1b */
+#define VPU_CORE2_SRAM_PDN_LSB              (1U << 8)       /* 4b */
+#define VPU_CORE2_SRAM_PDN_ACK_LSB          (1U << 12)      /* 4b */
+#define VPU_CORE2_SRAM_SLPB_LSB             (1U << 16)      /* 4b */
+#define VPU_CORE2_SRAM_SLPB_ACK_LSB         (1U << 28)      /* 4b */
+/* MFG_ASYNC_PWR_CON (0x10006000+0x334) */
+#define MFG_ASYNC_PWR_RST_B_LSB             (1U << 0)       /* 1b */
+#define MFG_ASYNC_PWR_ISO_LSB               (1U << 1)       /* 1b */
+#define MFG_ASYNC_PWR_ON_LSB                (1U << 2)       /* 1b */
+#define MFG_ASYNC_PWR_ON_2ND_LSB            (1U << 3)       /* 1b */
+#define MFG_ASYNC_PWR_CLK_DIS_LSB           (1U << 4)       /* 1b */
+#define MFG_ASYNC_SRAM_PDN_LSB              (1U << 8)       /* 4b */
+#define MFG_ASYNC_SRAM_PDN_ACK_LSB          (1U << 12)      /* 4b */
+/* MFG_PWR_CON (0x10006000+0x338) */
+#define MFG_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
+#define MFG_PWR_ISO_LSB                     (1U << 1)       /* 1b */
+#define MFG_PWR_ON_LSB                      (1U << 2)       /* 1b */
+#define MFG_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
+#define MFG_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
+#define MFG_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
+#define MFG_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
+/* VPU_CORE0_PWR_CON (0x10006000+0x33C) */
+#define VPU_CORE0_PWR_RST_B_LSB             (1U << 0)       /* 1b */
+#define VPU_CORE0_PWR_ISO_LSB               (1U << 1)       /* 1b */
+#define VPU_CORE0_PWR_ON_LSB                (1U << 2)       /* 1b */
+#define VPU_CORE0_ON_2ND_LSB                (1U << 3)       /* 1b */
+#define VPU_CORE0_CLK_DIS_LSB               (1U << 4)       /* 1b */
+#define VPU_CORE0_SRAM_CKISO_LSB            (1U << 5)       /* 1b */
+#define VPU_CORE0_SRAM_ISOINT_B_LSB         (1U << 6)       /* 1b */
+#define VPU_CORE0_SRAM_PDN_LSB              (1U << 8)       /* 4b */
+#define VPU_CORE0_SRAM_PDN_ACK_LSB          (1U << 12)      /* 4b */
+#define VPU_CORE0_SRAM_SLPB_LSB             (1U << 16)      /* 4b */
+#define VPU_CORE0_SRAM_SLPB_ACK_LSB         (1U << 28)      /* 4b */
+/* VPU_CORE1_PWR_CON (0x10006000+0x340) */
+#define VPU_CORE1_PWR_RST_B_LSB             (1U << 0)       /* 1b */
+#define VPU_CORE1_PWR_ISO_LSB               (1U << 1)       /* 1b */
+#define VPU_CORE1_PWR_ON_LSB                (1U << 2)       /* 1b */
+#define VPU_CORE1_ON_2ND_LSB                (1U << 3)       /* 1b */
+#define VPU_CORE1_CLK_DIS_LSB               (1U << 4)       /* 1b */
+#define VPU_CORE1_SRAM_CKISO_LSB            (1U << 5)       /* 1b */
+#define VPU_CORE1_SRAM_ISOINT_B_LSB         (1U << 6)       /* 1b */
+#define VPU_CORE1_SRAM_PDN_LSB              (1U << 8)       /* 4b */
+#define VPU_CORE1_SRAM_PDN_ACK_LSB          (1U << 12)      /* 4b */
+#define VPU_CORE1_SRAM_SLPB_LSB             (1U << 16)      /* 4b */
+#define VPU_CORE1_SRAM_SLPB_ACK_LSB         (1U << 28)      /* 4b */
+/* CAM_PWR_CON (0x10006000+0x344) */
+#define CAM_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
+#define CAM_PWR_ISO_LSB                     (1U << 1)       /* 1b */
+#define CAM_PWR_ON_LSB                      (1U << 2)       /* 1b */
+#define CAM_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
+#define CAM_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
+#define CAM_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
+#define CAM_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
+/* MFG_2D_PWR_CON (0x10006000+0x348) */
+#define MFG_2D_PWR_RST_B_LSB                (1U << 0)       /* 1b */
+#define MFG_2D_PWR_ISO_LSB                  (1U << 1)       /* 1b */
+#define MFG_2D_PWR_ON_LSB                   (1U << 2)       /* 1b */
+#define MFG_2D_PWR_ON_2ND_LSB               (1U << 3)       /* 1b */
+#define MFG_2D_PWR_CLK_DIS_LSB              (1U << 4)       /* 1b */
+#define MFG_2D_SRAM_PDN_LSB                 (1U << 8)       /* 4b */
+#define MFG_2D_SRAM_PDN_ACK_LSB             (1U << 12)      /* 4b */
+/* MFG_CORE0_PWR_CON (0x10006000+0x34C) */
+#define MFG_CORE0_PWR_RST_B_LSB             (1U << 0)       /* 1b */
+#define MFG_CORE0_PWR_ISO_LSB               (1U << 1)       /* 1b */
+#define MFG_CORE0_PWR_ON_LSB                (1U << 2)       /* 1b */
+#define MFG_CORE0_PWR_ON_2ND_LSB            (1U << 3)       /* 1b */
+#define MFG_CORE0_PWR_CLK_DIS_LSB           (1U << 4)       /* 1b */
+#define MFG_CORE0_SRAM_PDN_LSB              (1U << 8)       /* 4b */
+#define MFG_CORE0_SRAM_PDN_ACK_LSB          (1U << 12)      /* 4b */
+/* SYSRAM_CON (0x10006000+0x350) */
+#define IFR_SRAMROM_SRAM_CKISO_LSB          (1U << 0)       /* 1b */
+#define IFR_SRAMROM_SRAM_ISOINT_B_LSB       (1U << 1)       /* 1b */
+#define IFR_SRAMROM_SRAM_SLEEP_B_LSB        (1U << 4)       /* 8b */
+#define IFR_SRAMROM_SRAM_PDN_LSB            (1U << 16)      /* 8b */
+/* SYSROM_CON (0x10006000+0x354) */
+#define IFR_SRAMROM_ROM_PDN_LSB             (1U << 0)       /* 6b */
+/* SSPM_SRAM_CON (0x10006000+0x358) */
+#define SSPM_SRAM_CKISO_LSB                 (1U << 0)       /* 1b */
+#define SSPM_SRAM_ISOINT_B_LSB              (1U << 1)       /* 1b */
+#define SSPM_SRAM_SLEEP_B_LSB               (1U << 4)       /* 1b */
+#define SSPM_SRAM_PDN_LSB                   (1U << 16)      /* 1b */
+/* SCP_SRAM_CON (0x10006000+0x35C) */
+#define SCP_SRAM_CKISO_LSB                  (1U << 0)       /* 1b */
+#define SCP_SRAM_ISOINT_B_LSB               (1U << 1)       /* 1b */
+#define SCP_SRAM_SLEEP_B_LSB                (1U << 4)       /* 1b */
+#define SCP_SRAM_PDN_LSB                    (1U << 16)      /* 1b */
+/* UFS_SRAM_CON (0x10006000+0x36C) */
+#define UFS_SRAM_CKISO_LSB                  (1U << 0)       /* 1b */
+#define UFS_SRAM_ISOINT_B_LSB               (1U << 1)       /* 1b */
+#define UFS_SRAM_SLEEP_B_LSB                (1U << 4)       /* 5b */
+#define UFS_SRAM_PDN_LSB                    (1U << 16)      /* 5b */
+/* DUMMY_SRAM_CON (0x10006000+0x380) */
+#define DUMMY_SRAM_CKISO_LSB                (1U << 0)       /* 1b */
+#define DUMMY_SRAM_ISOINT_B_LSB             (1U << 1)       /* 1b */
+#define DUMMY_SRAM_SLEEP_B_LSB              (1U << 4)       /* 8b */
+#define DUMMY_SRAM_PDN_LSB                  (1U << 16)      /* 8b */
+/* MD_EXT_BUCK_ISO_CON (0x10006000+0x390) */
+#define VMODEM_BUCK_ELS_EN_LSB              (1U << 0)       /* 1b */
+#define VMD_BUCK_ELS_EN_LSB                 (1U << 1)       /* 1b */
+/* MD_SRAM_ISO_CON (0x10006000+0x394) */
+#define MD1_SRAM_ISOINT_B_LSB               (1U << 0)       /* 1b */
+/* MD_EXTRA_PWR_CON (0x10006000+0x398) */
+#define MD1_PWR_PROT_REQ_STA_LSB            (1U << 0)       /* 1b */
+#define MD2_PWR_PROT_REQ_STA_LSB            (1U << 1)       /* 1b */
+/* EXT_BUCK_CON (0x10006000+0x3A0) */
+#define RG_VA09_ON_LSB                      (1U << 0)       /* 1b */
+/* MBIST_EFUSE_REPAIR_ACK_STA (0x10006000+0x3D0) */
+#define MBIST_EFUSE_REPAIR_ACK_STA_LSB      (1U << 0)       /* 32b */
+/* SPM_DVFS_CON (0x10006000+0x400) */
+#define SPM_DVFS_CON_LSB                    (1U << 0)       /* 4b */
+#define SPM_DVFS_ACK_LSB                    (1U << 30)      /* 2b */
+/* SPM_MDBSI_CON (0x10006000+0x404) */
+#define SPM_MDBSI_CON_LSB                   (1U << 0)       /* 3b */
+/* SPM_MAS_PAUSE_MASK_B (0x10006000+0x408) */
+#define SPM_MAS_PAUSE_MASK_B_LSB            (1U << 0)       /* 32b */
+/* SPM_MAS_PAUSE2_MASK_B (0x10006000+0x40C) */
+#define SPM_MAS_PAUSE2_MASK_B_LSB           (1U << 0)       /* 32b */
+/* SPM_BSI_GEN (0x10006000+0x410) */
+#define SPM_BSI_START_LSB                   (1U << 0)       /* 1b */
+/* SPM_BSI_EN_SR (0x10006000+0x414) */
+#define SPM_BSI_EN_SR_LSB                   (1U << 0)       /* 32b */
+/* SPM_BSI_CLK_SR (0x10006000+0x418) */
+#define SPM_BSI_CLK_SR_LSB                  (1U << 0)       /* 32b */
+/* SPM_BSI_D0_SR (0x10006000+0x41C) */
+#define SPM_BSI_D0_SR_LSB                   (1U << 0)       /* 32b */
+/* SPM_BSI_D1_SR (0x10006000+0x420) */
+#define SPM_BSI_D1_SR_LSB                   (1U << 0)       /* 32b */
+/* SPM_BSI_D2_SR (0x10006000+0x424) */
+#define SPM_BSI_D2_SR_LSB                   (1U << 0)       /* 32b */
+/* SPM_AP_SEMA (0x10006000+0x428) */
+#define SPM_AP_SEMA_LSB                     (1U << 0)       /* 1b */
+/* SPM_SPM_SEMA (0x10006000+0x42C) */
+#define SPM_SPM_SEMA_LSB                    (1U << 0)       /* 1b */
+/* AP_MDSRC_REQ (0x10006000+0x430) */
+#define AP_MDSMSRC_REQ_LSB                  (1U << 0)       /* 1b */
+#define AP_L1SMSRC_REQ_LSB                  (1U << 1)       /* 1b */
+#define AP_MD2SRC_REQ_LSB                   (1U << 2)       /* 1b */
+#define AP_MDSMSRC_ACK_LSB                  (1U << 4)       /* 1b */
+#define AP_L1SMSRC_ACK_LSB                  (1U << 5)       /* 1b */
+#define AP_MD2SRC_ACK_LSB                   (1U << 6)       /* 1b */
+/* SPM2MD_DVFS_CON (0x10006000+0x438) */
+#define SPM2MD_DVFS_CON_LSB                 (1U << 0)       /* 32b */
+/* MD2SPM_DVFS_CON (0x10006000+0x43C) */
+#define MD2SPM_DVFS_CON_LSB                 (1U << 0)       /* 32b */
+/* DRAMC_DPY_CLK_SW_CON_RSV (0x10006000+0x440) */
+#define SPM2DRAMC_SHUFFLE_START_LSB         (1U << 0)       /* 1b */
+#define SPM2DRAMC_SHUFFLE_SWITCH_LSB        (1U << 1)       /* 1b */
+#define SPM2DPY_DIV2_SYNC_LSB               (1U << 2)       /* 1b */
+#define SPM2DPY_1PLL_SWITCH_LSB             (1U << 3)       /* 1b */
+#define SPM2DPY_TEST_CK_MUX_LSB             (1U << 4)       /* 1b */
+#define SPM2DPY_ASYNC_MODE_LSB              (1U << 5)       /* 1b */
+#define SPM2TOP_ASYNC_MODE_LSB              (1U << 6)       /* 1b */
+/* DPY_LP_CON (0x10006000+0x444) */
+#define SC_DDRPHY_LP_SIGNALS_LSB            (1U << 0)       /* 3b */
+/* CPU_DVFS_REQ (0x10006000+0x448) */
+#define CPU_DVFS_REQ_LSB                    (1U << 0)       /* 32b */
+/* SPM_PLL_CON (0x10006000+0x44C) */
+#define SC_MAINPLLOUT_OFF_LSB               (1U << 0)       /* 1b */
+#define SC_UNIPLLOUT_OFF_LSB                (1U << 1)       /* 1b */
+#define SC_MAINPLL_OFF_LSB                  (1U << 4)       /* 1b */
+#define SC_UNIPLL_OFF_LSB                   (1U << 5)       /* 1b */
+#define SC_MAINPLL_S_OFF_LSB                (1U << 8)       /* 1b */
+#define SC_UNIPLL_S_OFF_LSB                 (1U << 9)       /* 1b */
+#define SC_SMI_CK_OFF_LSB                   (1U << 16)      /* 1b */
+#define SC_SSPMK_CK_OFF_LSB                 (1U << 17)      /* 1b */
+/* SPM_EMI_BW_MODE (0x10006000+0x450) */
+#define EMI_BW_MODE_LSB                     (1U << 0)       /* 1b */
+#define EMI_BOOST_MODE_LSB                  (1U << 1)       /* 1b */
+#define EMI_BW_MODE_2_LSB                   (1U << 2)       /* 1b */
+#define EMI_BOOST_MODE_2_LSB                (1U << 3)       /* 1b */
+/* AP2MD_PEER_WAKEUP (0x10006000+0x454) */
+#define AP2MD_PEER_WAKEUP_LSB               (1U << 0)       /* 1b */
+/* ULPOSC_CON (0x10006000+0x458) */
+#define ULPOSC_EN_LSB                       (1U << 0)       /* 1b */
+#define ULPOSC_RST_LSB                      (1U << 1)       /* 1b */
+#define ULPOSC_CG_EN_LSB                    (1U << 2)       /* 1b */
+#define ULPOSC_CLK_SEL_LSB                  (1U << 3)       /* 1b */
+/* SPM2MM_CON (0x10006000+0x45C) */
+#define SPM2MM_FORCE_ULTRA_LSB              (1U << 0)       /* 1b */
+#define SPM2MM_DBL_OSTD_ACT_LSB             (1U << 1)       /* 1b */
+#define SPM2MM_ULTRAREQ_LSB                 (1U << 2)       /* 1b */
+#define SPM2MD_ULTRAREQ_LSB                 (1U << 3)       /* 1b */
+#define SPM2ISP_ULTRAREQ_LSB                (1U << 4)       /* 1b */
+#define MM2SPM_FORCE_ULTRA_ACK_LSB          (1U << 16)      /* 1b */
+#define MM2SPM_DBL_OSTD_ACT_ACK_LSB         (1U << 17)      /* 1b */
+#define SPM2ISP_ULTRAACK_D2T_LSB            (1U << 18)      /* 1b */
+#define SPM2MM_ULTRAACK_D2T_LSB             (1U << 19)      /* 1b */
+#define SPM2MD_ULTRAACK_D2T_LSB             (1U << 20)      /* 1b */
+/* DRAMC_DPY_CLK_SW_CON_SEL (0x10006000+0x460) */
+#define SW_DR_GATE_RETRY_EN_SEL_LSB         (1U << 0)       /* 2b */
+#define SW_EMI_CLK_OFF_SEL_LSB              (1U << 2)       /* 2b */
+#define SW_DPY_MODE_SW_SEL_LSB              (1U << 4)       /* 2b */
+#define SW_DMSUS_OFF_SEL_LSB                (1U << 6)       /* 2b */
+#define SW_MEM_CK_OFF_SEL_LSB               (1U << 8)       /* 2b */
+#define SW_DPY_2ND_DLL_EN_SEL_LSB           (1U << 10)      /* 2b */
+#define SW_DPY_DLL_EN_SEL_LSB               (1U << 12)      /* 2b */
+#define SW_DPY_DLL_CK_EN_SEL_LSB            (1U << 14)      /* 2b */
+#define SW_DPY_VREF_EN_SEL_LSB              (1U << 16)      /* 2b */
+#define SW_PHYPLL_EN_SEL_LSB                (1U << 18)      /* 2b */
+#define SW_DDRPHY_FB_CK_EN_SEL_LSB          (1U << 20)      /* 2b */
+#define SEPERATE_PHY_PWR_SEL_LSB            (1U << 23)      /* 1b */
+#define SW_DMDRAMCSHU_ACK_SEL_LSB           (1U << 24)      /* 2b */
+#define SW_EMI_CLK_OFF_ACK_SEL_LSB          (1U << 26)      /* 2b */
+#define SW_DR_SHORT_QUEUE_ACK_SEL_LSB       (1U << 28)      /* 2b */
+#define SW_DRAMC_DFS_STA_SEL_LSB            (1U << 30)      /* 2b */
+/* DRAMC_DPY_CLK_SW_CON (0x10006000+0x464) */
+#define SW_DR_GATE_RETRY_EN_LSB             (1U << 0)       /* 2b */
+#define SW_EMI_CLK_OFF_LSB                  (1U << 2)       /* 2b */
+#define SW_DPY_MODE_SW_LSB                  (1U << 4)       /* 2b */
+#define SW_DMSUS_OFF_LSB                    (1U << 6)       /* 2b */
+#define SW_MEM_CK_OFF_LSB                   (1U << 8)       /* 2b */
+#define SW_DPY_2ND_DLL_EN_LSB               (1U << 10)      /* 2b */
+#define SW_DPY_DLL_EN_LSB                   (1U << 12)      /* 2b */
+#define SW_DPY_DLL_CK_EN_LSB                (1U << 14)      /* 2b */
+#define SW_DPY_VREF_EN_LSB                  (1U << 16)      /* 2b */
+#define SW_PHYPLL_EN_LSB                    (1U << 18)      /* 2b */
+#define SW_DDRPHY_FB_CK_EN_LSB              (1U << 20)      /* 2b */
+#define SC_DR_SHU_EN_ACK_LSB                (1U << 24)      /* 2b */
+#define EMI_CLK_OFF_ACK_LSB                 (1U << 26)      /* 2b */
+#define SC_DR_SHORT_QUEUE_ACK_LSB           (1U << 28)      /* 2b */
+#define SC_DRAMC_DFS_STA_LSB                (1U << 30)      /* 2b */
+/* SPM_S1_MODE_CH (0x10006000+0x468) */
+#define SPM_S1_MODE_CH_LSB                  (1U << 0)       /* 2b */
+#define S1_EMI_CK_SWITCH_LSB                (1U << 8)       /* 2b */
+/* EMI_SELF_REFRESH_CH_STA (0x10006000+0x46C) */
+#define EMI_SELF_REFRESH_CH_LSB             (1U << 0)       /* 2b */
+/* DRAMC_DPY_CLK_SW_CON_SEL2 (0x10006000+0x470) */
+#define SW_PHYPLL_SHU_EN_SEL_LSB            (1U << 0)       /* 1b */
+#define SW_PHYPLL2_SHU_EN_SEL_LSB           (1U << 1)       /* 1b */
+#define SW_PHYPLL_MODE_SW_SEL_LSB           (1U << 2)       /* 1b */
+#define SW_PHYPLL2_MODE_SW_SEL_LSB          (1U << 3)       /* 1b */
+#define SW_DR_SHORT_QUEUE_SEL_LSB           (1U << 4)       /* 1b */
+#define SW_DR_SHU_EN_SEL_LSB                (1U << 5)       /* 1b */
+#define SW_DR_SHU_LEVEL_SEL_LSB             (1U << 6)       /* 1b */
+#define SW_DPY_BCLK_ENABLE_SEL_LSB          (1U << 8)       /* 2b */
+#define SW_SHU_RESTORE_SEL_LSB              (1U << 10)      /* 2b */
+#define SW_DPHY_PRECAL_UP_SEL_LSB           (1U << 12)      /* 2b */
+#define SW_DPHY_RXDLY_TRACK_EN_SEL_LSB      (1U << 14)      /* 2b */
+#define SW_TX_TRACKING_DIS_SEL_LSB          (1U << 16)      /* 2b */
+/* DRAMC_DPY_CLK_SW_CON2 (0x10006000+0x474) */
+#define SW_PHYPLL_SHU_EN_LSB                (1U << 0)       /* 1b */
+#define SW_PHYPLL2_SHU_EN_LSB               (1U << 1)       /* 1b */
+#define SW_PHYPLL_MODE_SW_LSB               (1U << 2)       /* 1b */
+#define SW_PHYPLL2_MODE_SW_LSB              (1U << 3)       /* 1b */
+#define SW_DR_SHORT_QUEUE_LSB               (1U << 4)       /* 1b */
+#define SW_DR_SHU_EN_LSB                    (1U << 5)       /* 1b */
+#define SW_DR_SHU_LEVEL_LSB                 (1U << 6)       /* 2b */
+#define SW_DPY_BCLK_ENABLE_LSB              (1U << 8)       /* 2b */
+#define SW_SHU_RESTORE_LSB                  (1U << 10)      /* 2b */
+#define SW_DPHY_PRECAL_UP_LSB               (1U << 12)      /* 2b */
+#define SW_DPHY_RXDLY_TRACK_EN_LSB          (1U << 14)      /* 2b */
+#define SW_TX_TRACKING_DIS_LSB              (1U << 16)      /* 2b */
+/* DRAMC_DMYRD_CON (0x10006000+0x478) */
+#define DRAMC_DMYRD_EN_CH0_LSB              (1U << 0)       /* 1b */
+#define DRAMC_DMYRD_INTV_SEL_CH0_LSB        (1U << 1)       /* 1b */
+#define DRAMC_DMYRD_EN_MOD_SEL_CH0_LSB      (1U << 2)       /* 1b */
+#define DRAMC_DMYRD_EN_CH1_LSB              (1U << 8)       /* 1b */
+#define DRAMC_DMYRD_INTV_SEL_CH1_LSB        (1U << 9)       /* 1b */
+#define DRAMC_DMYRD_EN_MOD_SEL_CH1_LSB      (1U << 10)      /* 1b */
+/* SPM_DRS_CON (0x10006000+0x47C) */
+#define SPM_DRS_DIS_REQ_CH0_LSB             (1U << 0)       /* 1b */
+#define SPM_DRS_DIS_REQ_CH1_LSB             (1U << 1)       /* 1b */
+#define SPM_DRS_DIS_ACK_CH0_LSB             (1U << 8)       /* 1b */
+#define SPM_DRS_DIS_ACK_CH1_LSB             (1U << 9)       /* 1b */
+/* SPM_SEMA_M0 (0x10006000+0x480) */
+#define SPM_SEMA_M0_LSB                     (1U << 0)       /* 8b */
+/* SPM_SEMA_M1 (0x10006000+0x484) */
+#define SPM_SEMA_M1_LSB                     (1U << 0)       /* 8b */
+/* SPM_SEMA_M2 (0x10006000+0x488) */
+#define SPM_SEMA_M2_LSB                     (1U << 0)       /* 8b */
+/* SPM_SEMA_M3 (0x10006000+0x48C) */
+#define SPM_SEMA_M3_LSB                     (1U << 0)       /* 8b */
+/* SPM_SEMA_M4 (0x10006000+0x490) */
+#define SPM_SEMA_M4_LSB                     (1U << 0)       /* 8b */
+/* SPM_SEMA_M5 (0x10006000+0x494) */
+#define SPM_SEMA_M5_LSB                     (1U << 0)       /* 8b */
+/* SPM_SEMA_M6 (0x10006000+0x498) */
+#define SPM_SEMA_M6_LSB                     (1U << 0)       /* 8b */
+/* SPM_SEMA_M7 (0x10006000+0x49C) */
+#define SPM_SEMA_M7_LSB                     (1U << 0)       /* 8b */
+/* SPM_MAS_PAUSE_MM_MASK_B (0x10006000+0x4A0) */
+#define SPM_MAS_PAUSE_MM_MASK_B_LSB         (1U << 0)       /* 16b */
+/* SPM_MAS_PAUSE_MCU_MASK_B (0x10006000+0x4A4) */
+#define SPM_MAS_PAUSE_MCU_MASK_B_LSB        (1U << 0)       /* 16b */
+/* SRAM_DREQ_ACK (0x10006000+0x4AC) */
+#define SRAM_DREQ_ACK_LSB                   (1U << 0)       /* 16b */
+/* SRAM_DREQ_CON (0x10006000+0x4B0) */
+#define SRAM_DREQ_CON_LSB                   (1U << 0)       /* 16b */
+/* SRAM_DREQ_CON_SET (0x10006000+0x4B4) */
+#define SRAM_DREQ_CON_SET_LSB               (1U << 0)       /* 16b */
+/* SRAM_DREQ_CON_CLR (0x10006000+0x4B8) */
+#define SRAM_DREQ_CON_CLR_LSB               (1U << 0)       /* 16b */
+/* SPM2EMI_ENTER_ULPM (0x10006000+0x4BC) */
+#define SPM2EMI_ENTER_ULPM_LSB              (1U << 0)       /* 1b */
+/* SPM_SSPM_IRQ (0x10006000+0x4C0) */
+#define SPM_SSPM_IRQ_LSB                    (1U << 0)       /* 1b */
+#define SPM_SSPM_IRQ_SEL_LSB                (1U << 4)       /* 1b */
+/* SPM2PMCU_INT (0x10006000+0x4C4) */
+#define SPM2PMCU_INT_LSB                    (1U << 0)       /* 4b */
+/* SPM2PMCU_INT_SET (0x10006000+0x4C8) */
+#define SPM2PMCU_INT_SET_LSB                (1U << 0)       /* 4b */
+/* SPM2PMCU_INT_CLR (0x10006000+0x4CC) */
+#define SPM2PMCU_INT_CLR_LSB                (1U << 0)       /* 4b */
+/* SPM2PMCU_MAILBOX_0 (0x10006000+0x4D0) */
+#define SPM2PMCU_MAILBOX_0_LSB              (1U << 0)       /* 32b */
+/* SPM2PMCU_MAILBOX_1 (0x10006000+0x4D4) */
+#define SPM2PMCU_MAILBOX_1_LSB              (1U << 0)       /* 32b */
+/* SPM2PMCU_MAILBOX_2 (0x10006000+0x4D8) */
+#define SPM2PMCU_MAILBOX_2_LSB              (1U << 0)       /* 32b */
+/* SPM2PMCU_MAILBOX_3 (0x10006000+0x4DC) */
+#define SPM2PMCU_MAILBOX_3_LSB              (1U << 0)       /* 32b */
+/* PMCU2SPM_INT (0x10006000+0x4E0) */
+#define PMCU2SPM_INT_LSB                    (1U << 0)       /* 4b */
+/* PMCU2SPM_INT_SET (0x10006000+0x4E4) */
+#define PMCU2SPM_INT_SET_LSB                (1U << 0)       /* 4b */
+/* PMCU2SPM_INT_CLR (0x10006000+0x4E8) */
+#define PMCU2SPM_INT_CLR_LSB                (1U << 0)       /* 4b */
+/* PMCU2SPM_MAILBOX_0 (0x10006000+0x4EC) */
+#define PMCU2SPM_MAILBOX_0_LSB              (1U << 0)       /* 32b */
+/* PMCU2SPM_MAILBOX_1 (0x10006000+0x4F0) */
+#define PMCU2SPM_MAILBOX_1_LSB              (1U << 0)       /* 32b */
+/* PMCU2SPM_MAILBOX_2 (0x10006000+0x4F4) */
+#define PMCU2SPM_MAILBOX_2_LSB              (1U << 0)       /* 32b */
+/* PMCU2SPM_MAILBOX_3 (0x10006000+0x4F8) */
+#define PMCU2SPM_MAILBOX_3_LSB              (1U << 0)       /* 32b */
+/* PMCU2SPM_CFG (0x10006000+0x4FC) */
+#define PMCU2SPM_INT_MASK_B_LSB             (1U << 0)       /* 4b */
+#define SPM_PMCU_MAILBOX_REQ_LSB            (1U << 8)       /* 1b */
+/* MP0_CPU0_IRQ_MASK (0x10006000+0x500) */
+#define MP0_CPU0_IRQ_MASK_LSB               (1U << 0)       /* 1b */
+#define MP0_CPU0_AUX_LSB                    (1U << 8)       /* 11b */
+/* MP0_CPU1_IRQ_MASK (0x10006000+0x504) */
+#define MP0_CPU1_IRQ_MASK_LSB               (1U << 0)       /* 1b */
+#define MP0_CPU1_AUX_LSB                    (1U << 8)       /* 11b */
+/* MP0_CPU2_IRQ_MASK (0x10006000+0x508) */
+#define MP0_CPU2_IRQ_MASK_LSB               (1U << 0)       /* 1b */
+#define MP0_CPU2_AUX_LSB                    (1U << 8)       /* 11b */
+/* MP0_CPU3_IRQ_MASK (0x10006000+0x50C) */
+#define MP0_CPU3_IRQ_MASK_LSB               (1U << 0)       /* 1b */
+#define MP0_CPU3_AUX_LSB                    (1U << 8)       /* 11b */
+/* MP1_CPU0_IRQ_MASK (0x10006000+0x510) */
+#define MP1_CPU0_IRQ_MASK_LSB               (1U << 0)       /* 1b */
+#define MP1_CPU0_AUX_LSB                    (1U << 8)       /* 11b */
+/* MP1_CPU1_IRQ_MASK (0x10006000+0x514) */
+#define MP1_CPU1_IRQ_MASK_LSB               (1U << 0)       /* 1b */
+#define MP1_CPU1_AUX_LSB                    (1U << 8)       /* 11b */
+/* MP1_CPU2_IRQ_MASK (0x10006000+0x518) */
+#define MP1_CPU2_IRQ_MASK_LSB               (1U << 0)       /* 1b */
+#define MP1_CPU2_AUX_LSB                    (1U << 8)       /* 11b */
+/* MP1_CPU3_IRQ_MASK (0x10006000+0x51C) */
+#define MP1_CPU3_IRQ_MASK_LSB               (1U << 0)       /* 1b */
+#define MP1_CPU3_AUX_LSB                    (1U << 8)       /* 11b */
+/* MP0_CPU0_WFI_EN (0x10006000+0x530) */
+#define MP0_CPU0_WFI_EN_LSB                 (1U << 0)       /* 1b */
+/* MP0_CPU1_WFI_EN (0x10006000+0x534) */
+#define MP0_CPU1_WFI_EN_LSB                 (1U << 0)       /* 1b */
+/* MP0_CPU2_WFI_EN (0x10006000+0x538) */
+#define MP0_CPU2_WFI_EN_LSB                 (1U << 0)       /* 1b */
+/* MP0_CPU3_WFI_EN (0x10006000+0x53C) */
+#define MP0_CPU3_WFI_EN_LSB                 (1U << 0)       /* 1b */
+/* MP1_CPU0_WFI_EN (0x10006000+0x540) */
+#define MP1_CPU0_WFI_EN_LSB                 (1U << 0)       /* 1b */
+/* MP1_CPU1_WFI_EN (0x10006000+0x544) */
+#define MP1_CPU1_WFI_EN_LSB                 (1U << 0)       /* 1b */
+/* MP1_CPU2_WFI_EN (0x10006000+0x548) */
+#define MP1_CPU2_WFI_EN_LSB                 (1U << 0)       /* 1b */
+/* MP1_CPU3_WFI_EN (0x10006000+0x54C) */
+#define MP1_CPU3_WFI_EN_LSB                 (1U << 0)       /* 1b */
+/* MP0_L2CFLUSH (0x10006000+0x554) */
+#define MP0_L2CFLUSH_REQ_LSB                (1U << 0)       /* 1b */
+#define MP0_L2CFLUSH_DONE_LSB               (1U << 4)       /* 1b */
+/* MP1_L2CFLUSH (0x10006000+0x558) */
+#define MP1_L2CFLUSH_REQ_LSB                (1U << 0)       /* 1b */
+#define MP1_L2CFLUSH_DONE_LSB               (1U << 4)       /* 1b */
+/* CPU_PTPOD2_CON (0x10006000+0x560) */
+#define MP0_PTPOD2_FBB_EN_LSB               (1U << 0)       /* 1b */
+#define MP1_PTPOD2_FBB_EN_LSB               (1U << 1)       /* 1b */
+#define MP0_PTPOD2_SPARK_EN_LSB             (1U << 2)       /* 1b */
+#define MP1_PTPOD2_SPARK_EN_LSB             (1U << 3)       /* 1b */
+#define MP0_PTPOD2_FBB_ACK_LSB              (1U << 4)       /* 1b */
+#define MP1_PTPOD2_FBB_ACK_LSB              (1U << 5)       /* 1b */
+/* ROOT_CPUTOP_ADDR (0x10006000+0x570) */
+#define ROOT_CPUTOP_ADDR_LSB                (1U << 0)       /* 32b */
+/* ROOT_CORE_ADDR (0x10006000+0x574) */
+#define ROOT_CORE_ADDR_LSB                  (1U << 0)       /* 32b */
+/* CPU_SPARE_CON (0x10006000+0x580) */
+#define CPU_SPARE_CON_LSB                   (1U << 0)       /* 32b */
+/* CPU_SPARE_CON_SET (0x10006000+0x584) */
+#define CPU_SPARE_CON_SET_LSB               (1U << 0)       /* 32b */
+/* CPU_SPARE_CON_CLR (0x10006000+0x588) */
+#define CPU_SPARE_CON_CLR_LSB               (1U << 0)       /* 32b */
+/* SPM2SW_MAILBOX_0 (0x10006000+0x5D0) */
+#define SPM2SW_MAILBOX_0_LSB                (1U << 0)       /* 32b */
+/* SPM2SW_MAILBOX_1 (0x10006000+0x5D4) */
+#define SPM2SW_MAILBOX_1_LSB                (1U << 0)       /* 32b */
+/* SPM2SW_MAILBOX_2 (0x10006000+0x5D8) */
+#define SPM2SW_MAILBOX_2_LSB                (1U << 0)       /* 32b */
+/* SPM2SW_MAILBOX_3 (0x10006000+0x5DC) */
+#define SPM2SW_MAILBOX_3_LSB                (1U << 0)       /* 32b */
+/* SW2SPM_INT (0x10006000+0x5E0) */
+#define SW2SPM_INT_LSB                      (1U << 0)       /* 4b */
+/* SW2SPM_INT_SET (0x10006000+0x5E4) */
+#define SW2SPM_INT_SET_LSB                  (1U << 0)       /* 4b */
+/* SW2SPM_INT_CLR (0x10006000+0x5E8) */
+#define SW2SPM_INT_CLR_LSB                  (1U << 0)       /* 4b */
+/* SW2SPM_MAILBOX_0 (0x10006000+0x5EC) */
+#define SW2SPM_MAILBOX_0_LSB                (1U << 0)       /* 32b */
+/* SW2SPM_MAILBOX_1 (0x10006000+0x5F0) */
+#define SW2SPM_MAILBOX_1_LSB                (1U << 0)       /* 32b */
+/* SW2SPM_MAILBOX_2 (0x10006000+0x5F4) */
+#define SW2SPM_MAILBOX_2_LSB                (1U << 0)       /* 32b */
+/* SW2SPM_MAILBOX_3 (0x10006000+0x5F8) */
+#define SW2SPM_MAILBOX_3_LSB                (1U << 0)       /* 32b */
+/* SW2SPM_CFG (0x10006000+0x5FC) */
+#define SWU2SPM_INT_MASK_B_LSB              (1U << 0)       /* 4b */
+#define SPM_SW_MAILBOX_REQ_LSB              (1U << 8)       /* 1b */
+/* SPM_SW_FLAG (0x10006000+0x600) */
+#define SPM_SW_FLAG_LSB                     (1U << 0)       /* 32b */
+/* SPM_SW_DEBUG (0x10006000+0x604) */
+#define SPM_SW_DEBUG_LSB                    (1U << 0)       /* 32b */
+/* SPM_SW_RSV_0 (0x10006000+0x608) */
+#define SPM_SW_RSV_0_LSB                    (1U << 0)       /* 32b */
+/* SPM_SW_RSV_1 (0x10006000+0x60C) */
+#define SPM_SW_RSV_1_LSB                    (1U << 0)       /* 32b */
+/* SPM_SW_RSV_2 (0x10006000+0x610) */
+#define SPM_SW_RSV_2_LSB                    (1U << 0)       /* 32b */
+/* SPM_SW_RSV_3 (0x10006000+0x614) */
+#define SPM_SW_RSV_3_LSB                    (1U << 0)       /* 32b */
+/* SPM_SW_RSV_4 (0x10006000+0x618) */
+#define SPM_SW_RSV_4_LSB                    (1U << 0)       /* 32b */
+/* SPM_SW_RSV_5 (0x10006000+0x61C) */
+#define SPM_SW_RSV_5_LSB                    (1U << 0)       /* 32b */
+/* SPM_RSV_CON (0x10006000+0x620) */
+#define SPM_RSV_CON_LSB                     (1U << 0)       /* 16b */
+/* SPM_RSV_STA (0x10006000+0x624) */
+#define SPM_RSV_STA_LSB                     (1U << 0)       /* 16b */
+/* SPM_RSV_CON1 (0x10006000+0x628) */
+#define SPM_RSV_CON1_LSB                    (1U << 0)       /* 16b */
+/* SPM_RSV_STA1 (0x10006000+0x62C) */
+#define SPM_RSV_STA1_LSB                    (1U << 0)       /* 16b */
+/* SPM_PASR_DPD_0 (0x10006000+0x630) */
+#define SPM_PASR_DPD_0_LSB                  (1U << 0)       /* 32b */
+/* SPM_PASR_DPD_1 (0x10006000+0x634) */
+#define SPM_PASR_DPD_1_LSB                  (1U << 0)       /* 32b */
+/* SPM_PASR_DPD_2 (0x10006000+0x638) */
+#define SPM_PASR_DPD_2_LSB                  (1U << 0)       /* 32b */
+/* SPM_PASR_DPD_3 (0x10006000+0x63C) */
+#define SPM_PASR_DPD_3_LSB                  (1U << 0)       /* 32b */
+/* SPM_SPARE_CON (0x10006000+0x640) */
+#define SPM_SPARE_CON_LSB                   (1U << 0)       /* 32b */
+/* SPM_SPARE_CON_SET (0x10006000+0x644) */
+#define SPM_SPARE_CON_SET_LSB               (1U << 0)       /* 32b */
+/* SPM_SPARE_CON_CLR (0x10006000+0x648) */
+#define SPM_SPARE_CON_CLR_LSB               (1U << 0)       /* 32b */
+/* SPM_SW_RSV_6 (0x10006000+0x64C) */
+#define SPM_SW_RSV_6_LSB                    (1U << 0)       /* 32b */
+/* SPM_SW_RSV_7 (0x10006000+0x650) */
+#define SPM_SW_RSV_7_LSB                    (1U << 0)       /* 32b */
+/* SPM_SW_RSV_8 (0x10006000+0x654) */
+#define SPM_SW_RSV_8_LSB                    (1U << 0)       /* 32b */
+/* SPM_SW_RSV_9 (0x10006000+0x658) */
+#define SPM_SW_RSV_9_LSB                    (1U << 0)       /* 32b */
+/* SPM_SW_RSV_10 (0x10006000+0x65C) */
+#define SPM_SW_RSV_10_LSB                   (1U << 0)       /* 32b */
+/* SPM_SW_RSV_18 (0x10006000+0x67C) */
+#define SPM_SW_RSV_18_LSB                   (1U << 0)       /* 32b */
+/* SPM_SW_RSV_19 (0x10006000+0x680) */
+#define SPM_SW_RSV_19_LSB                   (1U << 0)       /* 32b */
+/* DVFSRC_EVENT_MASK_CON (0x10006000+0x690) */
+#define DVFSRC_EVENT_MASK_B_LSB             (1U << 0)       /* 16b */
+#define DVFSRC_EVENT_TRIGGER_MASK_B_LSB     (1U << 16)      /* 1b */
+/* DVFSRC_EVENT_FORCE_ON (0x10006000+0x694) */
+#define DVFSRC_EVENT_FORCE_ON_LSB           (1U << 0)       /* 16b */
+#define DVFSRC_EVENT_TRIGGER_FORCE_ON_LSB   (1U << 16)      /* 1b */
+/* DVFSRC_EVENT_SEL (0x10006000+0x698) */
+#define DVFSRC_EVENT_SEL_LSB                (1U << 0)       /* 16b */
+/* SPM_DVFS_EVENT_STA (0x10006000+0x69C) */
+#define SPM_DVFS_EVENT_STA_LSB              (1U << 0)       /* 32b */
+/* SPM_DVFS_EVENT_STA1 (0x10006000+0x6A0) */
+#define SPM_DVFS_EVENT_STA1_LSB             (1U << 0)       /* 32b */
+/* SPM_DVFS_LEVEL (0x10006000+0x6A4) */
+#define SPM_DVFS_LEVEL_LSB                  (1U << 0)       /* 16b */
+/* DVFS_ABORT_STA (0x10006000+0x6A8) */
+#define RC2SPM_EVENT_ABORT_D2T_LSB          (1U << 0)       /* 16b */
+#define RC2SPM_EVENT_ABORT_MASK_OR_LSB      (1U << 16)      /* 1b */
+/* DVFS_ABORT_OTHERS_MASK (0x10006000+0x6AC) */
+#define DVFS_ABORT_OTHERS_MASK_B_LSB        (1U << 0)       /* 16b */
+/* SPM_DFS_LEVEL (0x10006000+0x6B0) */
+#define SPM_DFS_LEVEL_LSB                   (1U << 0)       /* 4b */
+/* SPM_DVS_LEVEL (0x10006000+0x6B4) */
+#define SPM_VCORE_LEVEL_LSB                 (1U << 0)       /* 8b */
+#define SPM_VSRAM_LEVEL_LSB                 (1U << 8)       /* 8b */
+#define SPM_VMODEM_LEVEL_LSB                (1U << 16)      /* 8b */
+/* SPM_DVFS_MISC (0x10006000+0x6B8) */
+#define MSDC_DVFS_REQUEST_LSB               (1U << 0)       /* 1b */
+#define MSDC_DVFS_LEVEL_LSB                 (1U << 1)       /* 4b */
+#define SDIO_READY_TO_SPM_LSB               (1U << 7)       /* 1b */
+#define MD2AP_CENTRAL_BUCK_GEAR_REQ_D2T_LSB (1U << 8)       /* 1b */
+#define MD2AP_CENTRAL_BUCK_GEAR_RDY_D2T_LSB (1U << 9)       /* 1b */
+/* SPARE_SRC_REQ_MASK (0x10006000+0x6C0) */
+#define SPARE1_DDREN_MASK_B_LSB             (1U << 0)       /* 1b */
+#define SPARE1_APSRC_REQ_MASK_B_LSB         (1U << 1)       /* 1b */
+#define SPARE1_VRF18_REQ_MASK_B_LSB         (1U << 2)       /* 1b */
+#define SPARE1_INFRA_REQ_MASK_B_LSB         (1U << 3)       /* 1b */
+#define SPARE1_SRCCLKENA_MASK_B_LSB         (1U << 4)       /* 1b */
+#define SPARE1_DDREN_2_MASK_B_LSB           (1U << 5)       /* 1b */
+#define SPARE2_DDREN_MASK_B_LSB             (1U << 8)       /* 1b */
+#define SPARE2_APSRC_REQ_MASK_B_LSB         (1U << 9)       /* 1b */
+#define SPARE2_VRF18_REQ_MASK_B_LSB         (1U << 10)      /* 1b */
+#define SPARE2_INFRA_REQ_MASK_B_LSB         (1U << 11)      /* 1b */
+#define SPARE2_SRCCLKENA_MASK_B_LSB         (1U << 12)      /* 1b */
+#define SPARE2_DDREN_2_MASK_B_LSB           (1U << 13)      /* 1b */
+/* SCP_VCORE_LEVEL (0x10006000+0x6C4) */
+#define SCP_VCORE_LEVEL_LSB                 (1U << 0)       /* 8b */
+/* SC_MM_CK_SEL_CON (0x10006000+0x6C8) */
+#define SC_MM_CK_SEL_LSB                    (1U << 0)       /* 4b */
+#define SC_MM_CK_SEL_EN_LSB                 (1U << 4)       /* 1b */
+/* SPARE_ACK_STA (0x10006000+0x6F0) */
+#define SPARE_ACK_SYNC_LSB                  (1U << 0)       /* 32b */
+/* SPARE_ACK_MASK (0x10006000+0x6F4) */
+#define SPARE_ACK_MASK_B_LSB                (1U << 0)       /* 32b */
+/* SPM_DVFS_CON1 (0x10006000+0x700) */
+#define SPM_DVFS_CON1_LSB                   (1U << 0)       /* 32b */
+/* SPM_DVFS_CON1_STA (0x10006000+0x704) */
+#define SPM_DVFS_CON1_STA_LSB               (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD0 (0x10006000+0x710) */
+#define SPM_DVFS_CMD0_LSB                   (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD1 (0x10006000+0x714) */
+#define SPM_DVFS_CMD1_LSB                   (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD2 (0x10006000+0x718) */
+#define SPM_DVFS_CMD2_LSB                   (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD3 (0x10006000+0x71C) */
+#define SPM_DVFS_CMD3_LSB                   (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD4 (0x10006000+0x720) */
+#define SPM_DVFS_CMD4_LSB                   (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD5 (0x10006000+0x724) */
+#define SPM_DVFS_CMD5_LSB                   (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD6 (0x10006000+0x728) */
+#define SPM_DVFS_CMD6_LSB                   (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD7 (0x10006000+0x72C) */
+#define SPM_DVFS_CMD7_LSB                   (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD8 (0x10006000+0x730) */
+#define SPM_DVFS_CMD8_LSB                   (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD9 (0x10006000+0x734) */
+#define SPM_DVFS_CMD9_LSB                   (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD10 (0x10006000+0x738) */
+#define SPM_DVFS_CMD10_LSB                  (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD11 (0x10006000+0x73C) */
+#define SPM_DVFS_CMD11_LSB                  (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD12 (0x10006000+0x740) */
+#define SPM_DVFS_CMD12_LSB                  (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD13 (0x10006000+0x744) */
+#define SPM_DVFS_CMD13_LSB                  (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD14 (0x10006000+0x748) */
+#define SPM_DVFS_CMD14_LSB                  (1U << 0)       /* 32b */
+/* SPM_DVFS_CMD15 (0x10006000+0x74C) */
+#define SPM_DVFS_CMD15_LSB                  (1U << 0)       /* 32b */
+/* WDT_LATCH_SPARE0_FIX (0x10006000+0x780) */
+#define WDT_LATCH_SPARE0_FIX_LSB            (1U << 0)       /* 32b */
+/* WDT_LATCH_SPARE1_FIX (0x10006000+0x784) */
+#define WDT_LATCH_SPARE1_FIX_LSB            (1U << 0)       /* 32b */
+/* WDT_LATCH_SPARE2_FIX (0x10006000+0x788) */
+#define WDT_LATCH_SPARE2_FIX_LSB            (1U << 0)       /* 32b */
+/* WDT_LATCH_SPARE3_FIX (0x10006000+0x78C) */
+#define WDT_LATCH_SPARE3_FIX_LSB            (1U << 0)       /* 32b */
+/* SPARE_ACK_IN_FIX (0x10006000+0x790) */
+#define SPARE_ACK_IN_FIX_LSB                (1U << 0)       /* 32b */
+/* DCHA_LATCH_RSV0_FIX (0x10006000+0x794) */
+#define DCHA_LATCH_RSV0_FIX_LSB             (1U << 0)       /* 32b */
+/* DCHB_LATCH_RSV0_FIX (0x10006000+0x798) */
+#define DCHB_LATCH_RSV0_FIX_LSB             (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_0 (0x10006000+0x800) */
+#define PCM_WDT_LATCH_0_LSB                 (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_1 (0x10006000+0x804) */
+#define PCM_WDT_LATCH_1_LSB                 (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_2 (0x10006000+0x808) */
+#define PCM_WDT_LATCH_2_LSB                 (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_3 (0x10006000+0x80C) */
+#define PCM_WDT_LATCH_3_LSB                 (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_4 (0x10006000+0x810) */
+#define PCM_WDT_LATCH_4_LSB                 (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_5 (0x10006000+0x814) */
+#define PCM_WDT_LATCH_5_LSB                 (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_6 (0x10006000+0x818) */
+#define PCM_WDT_LATCH_6_LSB                 (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_7 (0x10006000+0x81C) */
+#define PCM_WDT_LATCH_7_LSB                 (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_8 (0x10006000+0x820) */
+#define PCM_WDT_LATCH_8_LSB                 (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_9 (0x10006000+0x824) */
+#define PCM_WDT_LATCH_9_LSB                 (1U << 0)       /* 32b */
+/* WDT_LATCH_SPARE0 (0x10006000+0x828) */
+#define WDT_LATCH_SPARE0_LSB                (1U << 0)       /* 32b */
+/* WDT_LATCH_SPARE1 (0x10006000+0x82C) */
+#define WDT_LATCH_SPARE1_LSB                (1U << 0)       /* 32b */
+/* WDT_LATCH_SPARE2 (0x10006000+0x830) */
+#define WDT_LATCH_SPARE2_LSB                (1U << 0)       /* 32b */
+/* WDT_LATCH_SPARE3 (0x10006000+0x834) */
+#define WDT_LATCH_SPARE3_LSB                (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_10 (0x10006000+0x838) */
+#define PCM_WDT_LATCH_10_LSB                (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_11 (0x10006000+0x83C) */
+#define PCM_WDT_LATCH_11_LSB                (1U << 0)       /* 32b */
+/* DCHA_GATING_LATCH_0 (0x10006000+0x840) */
+#define DCHA_GATING_LATCH_0_LSB             (1U << 0)       /* 32b */
+/* DCHA_GATING_LATCH_1 (0x10006000+0x844) */
+#define DCHA_GATING_LATCH_1_LSB             (1U << 0)       /* 32b */
+/* DCHA_GATING_LATCH_2 (0x10006000+0x848) */
+#define DCHA_GATING_LATCH_2_LSB             (1U << 0)       /* 32b */
+/* DCHA_GATING_LATCH_3 (0x10006000+0x84C) */
+#define DCHA_GATING_LATCH_3_LSB             (1U << 0)       /* 32b */
+/* DCHA_GATING_LATCH_4 (0x10006000+0x850) */
+#define DCHA_GATING_LATCH_4_LSB             (1U << 0)       /* 32b */
+/* DCHA_GATING_LATCH_5 (0x10006000+0x854) */
+#define DCHA_GATING_LATCH_5_LSB             (1U << 0)       /* 32b */
+/* DCHA_GATING_LATCH_6 (0x10006000+0x858) */
+#define DCHA_GATING_LATCH_6_LSB             (1U << 0)       /* 32b */
+/* DCHA_GATING_LATCH_7 (0x10006000+0x85C) */
+#define DCHA_GATING_LATCH_7_LSB             (1U << 0)       /* 32b */
+/* DCHB_GATING_LATCH_0 (0x10006000+0x860) */
+#define DCHB_GATING_LATCH_0_LSB             (1U << 0)       /* 32b */
+/* DCHB_GATING_LATCH_1 (0x10006000+0x864) */
+#define DCHB_GATING_LATCH_1_LSB             (1U << 0)       /* 32b */
+/* DCHB_GATING_LATCH_2 (0x10006000+0x868) */
+#define DCHB_GATING_LATCH_2_LSB             (1U << 0)       /* 32b */
+/* DCHB_GATING_LATCH_3 (0x10006000+0x86C) */
+#define DCHB_GATING_LATCH_3_LSB             (1U << 0)       /* 32b */
+/* DCHB_GATING_LATCH_4 (0x10006000+0x870) */
+#define DCHB_GATING_LATCH_4_LSB             (1U << 0)       /* 32b */
+/* DCHB_GATING_LATCH_5 (0x10006000+0x874) */
+#define DCHB_GATING_LATCH_5_LSB             (1U << 0)       /* 32b */
+/* DCHB_GATING_LATCH_6 (0x10006000+0x878) */
+#define DCHB_GATING_LATCH_6_LSB             (1U << 0)       /* 32b */
+/* DCHB_GATING_LATCH_7 (0x10006000+0x87C) */
+#define DCHB_GATING_LATCH_7_LSB             (1U << 0)       /* 32b */
+/* DCHA_LATCH_RSV0 (0x10006000+0x880) */
+#define DCHA_LATCH_RSV0_LSB                 (1U << 0)       /* 32b */
+/* DCHB_LATCH_RSV0 (0x10006000+0x884) */
+#define DCHB_LATCH_RSV0_LSB                 (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_12 (0x10006000+0x888) */
+#define PCM_WDT_LATCH_12_LSB                (1U << 0)       /* 32b */
+/* PCM_WDT_LATCH_13 (0x10006000+0x88C) */
+#define PCM_WDT_LATCH_13_LSB                (1U << 0)       /* 32b */
+/* SPM_PC_TRACE_CON (0x10006000+0x8C0) */
+#define SPM_PC_TRACE_OFFSET_LSB             (1U << 0)       /* 12b */
+#define SPM_PC_TRACE_HW_EN_LSB              (1U << 16)      /* 1b */
+#define SPM_PC_TRACE_SW_LSB                 (1U << 17)      /* 1b */
+/* SPM_PC_TRACE_G0 (0x10006000+0x8C4) */
+#define SPM_PC_TRACE0_LSB                   (1U << 0)       /* 12b */
+#define SPM_PC_TRACE1_LSB                   (1U << 16)      /* 12b */
+/* SPM_PC_TRACE_G1 (0x10006000+0x8C8) */
+#define SPM_PC_TRACE2_LSB                   (1U << 0)       /* 12b */
+#define SPM_PC_TRACE3_LSB                   (1U << 16)      /* 12b */
+/* SPM_PC_TRACE_G2 (0x10006000+0x8CC) */
+#define SPM_PC_TRACE4_LSB                   (1U << 0)       /* 12b */
+#define SPM_PC_TRACE5_LSB                   (1U << 16)      /* 12b */
+/* SPM_PC_TRACE_G3 (0x10006000+0x8D0) */
+#define SPM_PC_TRACE6_LSB                   (1U << 0)       /* 12b */
+#define SPM_PC_TRACE7_LSB                   (1U << 16)      /* 12b */
+/* SPM_PC_TRACE_G4 (0x10006000+0x8D4) */
+#define SPM_PC_TRACE8_LSB                   (1U << 0)       /* 12b */
+#define SPM_PC_TRACE9_LSB                   (1U << 16)      /* 12b */
+/* SPM_PC_TRACE_G5 (0x10006000+0x8D8) */
+#define SPM_PC_TRACE10_LSB                  (1U << 0)       /* 12b */
+#define SPM_PC_TRACE11_LSB                  (1U << 16)      /* 12b */
+/* SPM_PC_TRACE_G6 (0x10006000+0x8DC) */
+#define SPM_PC_TRACE12_LSB                  (1U << 0)       /* 12b */
+#define SPM_PC_TRACE13_LSB                  (1U << 16)      /* 12b */
+/* SPM_PC_TRACE_G7 (0x10006000+0x8E0) */
+#define SPM_PC_TRACE14_LSB                  (1U << 0)       /* 12b */
+#define SPM_PC_TRACE15_LSB                  (1U << 16)      /* 12b */
+/* SPM_ACK_CHK_CON (0x10006000+0x900) */
+#define SPM_ACK_CHK_SW_EN_LSB               (1U << 0)       /* 1b */
+#define SPM_ACK_CHK_CLR_ALL_LSB             (1U << 1)       /* 1b */
+#define SPM_ACK_CHK_CLR_TIMER_LSB           (1U << 2)       /* 1b */
+#define SPM_ACK_CHK_CLR_IRQ_LSB             (1U << 3)       /* 1b */
+#define SPM_ACK_CHK_STA_EN_LSB              (1U << 4)       /* 1b */
+#define SPM_ACK_CHK_WAKEUP_EN_LSB           (1U << 5)       /* 1b */
+#define SPM_ACK_CHK_WDT_EN_LSB              (1U << 6)       /* 1b */
+#define SPM_ACK_CHK_LOCK_PC_TRACE_EN_LSB    (1U << 7)       /* 1b */
+#define SPM_ACK_CHK_HW_EN_LSB               (1U << 8)       /* 1b */
+#define SPM_ACK_CHK_HW_MODE_LSB             (1U << 9)       /* 3b */
+#define SPM_ACK_CHK_FAIL_LSB                (1U << 15)      /* 1b */
+#define SPM_ACK_CHK_SWINT_EN_LSB            (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_PC (0x10006000+0x904) */
+#define SPM_ACK_CHK_HW_TRIG_PC_VAL_LSB      (1U << 0)       /* 16b */
+#define SPM_ACK_CHK_HW_TARG_PC_VAL_LSB      (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_SEL (0x10006000+0x908) */
+#define SPM_ACK_CHK_HW_TRIG_SIGNAL_SEL_LSB  (1U << 0)       /* 5b */
+#define SPM_ACK_CHK_HW_TRIG_GROUP_SEL_LSB   (1U << 5)       /* 3b */
+#define SPM_ACK_CHK_HW_TARG_SIGNAL_SEL_LSB  (1U << 16)      /* 5b */
+#define SPM_ACK_CHK_HW_TARG_GROUP_SEL_LSB   (1U << 21)      /* 3b */
+/* SPM_ACK_CHK_TIMER (0x10006000+0x90C) */
+#define SPM_ACK_CHK_TIMER_VAL_LSB           (1U << 0)       /* 16b */
+#define SPM_ACK_CHK_TIMER_LSB               (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_STA (0x10006000+0x910) */
+#define SPM_ACK_CHK_STA_LSB                 (1U << 0)       /* 32b */
+/* SPM_ACK_CHK_LATCH (0x10006000+0x914) */
+#define SPM_ACK_CHK_LATCH_LSB               (1U << 0)       /* 32b */
+/* SPM_ACK_CHK_CON2 (0x10006000+0x920) */
+#define SPM_ACK_CHK_SW_EN2_LSB              (1U << 0)       /* 1b */
+#define SPM_ACK_CHK_CLR_ALL2_LSB            (1U << 1)       /* 1b */
+#define SPM_ACK_CHK_CLR_TIMER2_LSB          (1U << 2)       /* 1b */
+#define SPM_ACK_CHK_CLR_IRQ2_LSB            (1U << 3)       /* 1b */
+#define SPM_ACK_CHK_STA_EN2_LSB             (1U << 4)       /* 1b */
+#define SPM_ACK_CHK_WAKEUP_EN2_LSB          (1U << 5)       /* 1b */
+#define SPM_ACK_CHK_WDT_EN2_LSB             (1U << 6)       /* 1b */
+#define SPM_ACK_CHK_LOCK_PC_TRACE_EN2_LSB   (1U << 7)       /* 1b */
+#define SPM_ACK_CHK_HW_EN2_LSB              (1U << 8)       /* 1b */
+#define SPM_ACK_CHK_HW_MODE2_LSB            (1U << 9)       /* 3b */
+#define SPM_ACK_CHK_FAIL2_LSB               (1U << 15)      /* 1b */
+#define SPM_ACK_CHK_SWINT_EN2_LSB           (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_PC2 (0x10006000+0x924) */
+#define SPM_ACK_CHK_HW_TRIG_PC_VAL2_LSB     (1U << 0)       /* 16b */
+#define SPM_ACK_CHK_HW_TARG_PC_VAL2_LSB     (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_SEL2 (0x10006000+0x928) */
+#define SPM_ACK_CHK_HW_TRIG_SIGNAL_SEL2_LSB (1U << 0)       /* 5b */
+#define SPM_ACK_CHK_HW_TRIG_GROUP_SEL2_LSB  (1U << 5)       /* 3b */
+#define SPM_ACK_CHK_HW_TARG_SIGNAL_SEL2_LSB (1U << 16)      /* 5b */
+#define SPM_ACK_CHK_HW_TARG_GROUP_SEL2_LSB  (1U << 21)      /* 3b */
+/* SPM_ACK_CHK_TIMER2 (0x10006000+0x92C) */
+#define SPM_ACK_CHK_TIMER_VAL2_LSB          (1U << 0)       /* 16b */
+#define SPM_ACK_CHK_TIMER2_LSB              (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_STA2 (0x10006000+0x930) */
+#define SPM_ACK_CHK_STA2_LSB                (1U << 0)       /* 32b */
+/* SPM_ACK_CHK_LATCH2 (0x10006000+0x934) */
+#define SPM_ACK_CHK_LATCH2_LSB              (1U << 0)       /* 32b */
+/* SPM_ACK_CHK_CON3 (0x10006000+0x940) */
+#define SPM_ACK_CHK_SW_EN3_LSB              (1U << 0)       /* 1b */
+#define SPM_ACK_CHK_CLR_ALL3_LSB            (1U << 1)       /* 1b */
+#define SPM_ACK_CHK_CLR_TIMER3_LSB          (1U << 2)       /* 1b */
+#define SPM_ACK_CHK_CLR_IRQ3_LSB            (1U << 3)       /* 1b */
+#define SPM_ACK_CHK_STA_EN3_LSB             (1U << 4)       /* 1b */
+#define SPM_ACK_CHK_WAKEUP_EN3_LSB          (1U << 5)       /* 1b */
+#define SPM_ACK_CHK_WDT_EN3_LSB             (1U << 6)       /* 1b */
+#define SPM_ACK_CHK_LOCK_PC_TRACE_EN3_LSB   (1U << 7)       /* 1b */
+#define SPM_ACK_CHK_HW_EN3_LSB              (1U << 8)       /* 1b */
+#define SPM_ACK_CHK_HW_MODE3_LSB            (1U << 9)       /* 3b */
+#define SPM_ACK_CHK_FAIL3_LSB               (1U << 15)      /* 1b */
+#define SPM_ACK_CHK_SWINT_EN3_LSB           (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_PC3 (0x10006000+0x944) */
+#define SPM_ACK_CHK_HW_TRIG_PC_VAL3_LSB     (1U << 0)       /* 16b */
+#define SPM_ACK_CHK_HW_TARG_PC_VAL3_LSB     (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_SEL3 (0x10006000+0x948) */
+#define SPM_ACK_CHK_HW_TRIG_SIGNAL_SEL3_LSB (1U << 0)       /* 5b */
+#define SPM_ACK_CHK_HW_TRIG_GROUP_SEL3_LSB  (1U << 5)       /* 3b */
+#define SPM_ACK_CHK_HW_TARG_SIGNAL_SEL3_LSB (1U << 16)      /* 5b */
+#define SPM_ACK_CHK_HW_TARG_GROUP_SEL3_LSB  (1U << 21)      /* 3b */
+/* SPM_ACK_CHK_TIMER3 (0x10006000+0x94C) */
+#define SPM_ACK_CHK_TIMER_VAL3_LSB          (1U << 0)       /* 16b */
+#define SPM_ACK_CHK_TIMER3_LSB              (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_STA3 (0x10006000+0x950) */
+#define SPM_ACK_CHK_STA3_LSB                (1U << 0)       /* 32b */
+/* SPM_ACK_CHK_LATCH3 (0x10006000+0x954) */
+#define SPM_ACK_CHK_LATCH3_LSB              (1U << 0)       /* 32b */
+/* SPM_ACK_CHK_CON4 (0x10006000+0x960) */
+#define SPM_ACK_CHK_SW_EN4_LSB              (1U << 0)       /* 1b */
+#define SPM_ACK_CHK_CLR_ALL4_LSB            (1U << 1)       /* 1b */
+#define SPM_ACK_CHK_CLR_TIMER4_LSB          (1U << 2)       /* 1b */
+#define SPM_ACK_CHK_CLR_IRQ4_LSB            (1U << 3)       /* 1b */
+#define SPM_ACK_CHK_STA_EN4_LSB             (1U << 4)       /* 1b */
+#define SPM_ACK_CHK_WAKEUP_EN4_LSB          (1U << 5)       /* 1b */
+#define SPM_ACK_CHK_WDT_EN4_LSB             (1U << 6)       /* 1b */
+#define SPM_ACK_CHK_LOCK_PC_TRACE_EN4_LSB   (1U << 7)       /* 1b */
+#define SPM_ACK_CHK_HW_EN4_LSB              (1U << 8)       /* 1b */
+#define SPM_ACK_CHK_HW_MODE4_LSB            (1U << 9)       /* 3b */
+#define SPM_ACK_CHK_FAIL4_LSB               (1U << 15)      /* 1b */
+#define SPM_ACK_CHK_SWINT_EN4_LSB           (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_PC4 (0x10006000+0x964) */
+#define SPM_ACK_CHK_HW_TRIG_PC_VAL4_LSB     (1U << 0)       /* 16b */
+#define SPM_ACK_CHK_HW_TARG_PC_VAL4_LSB     (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_SEL4 (0x10006000+0x968) */
+#define SPM_ACK_CHK_HW_TRIG_SIGNAL_SEL4_LSB (1U << 0)       /* 5b */
+#define SPM_ACK_CHK_HW_TRIG_GROUP_SEL4_LSB  (1U << 5)       /* 3b */
+#define SPM_ACK_CHK_HW_TARG_SIGNAL_SEL4_LSB (1U << 16)      /* 5b */
+#define SPM_ACK_CHK_HW_TARG_GROUP_SEL4_LSB  (1U << 21)      /* 3b */
+/* SPM_ACK_CHK_TIMER4 (0x10006000+0x96C) */
+#define SPM_ACK_CHK_TIMER_VAL4_LSB          (1U << 0)       /* 16b */
+#define SPM_ACK_CHK_TIMER4_LSB              (1U << 16)      /* 16b */
+/* SPM_ACK_CHK_STA4 (0x10006000+0x970) */
+#define SPM_ACK_CHK_STA4_LSB                (1U << 0)       /* 32b */
+/* SPM_ACK_CHK_LATCH4 (0x10006000+0x974) */
+#define SPM_ACK_CHK_LATCH4_LSB              (1U << 0)       /* 32b */
+
+/* --- SPM Flag Define --- */
+#define SPM_FLAG_DIS_CPU_PDN                  (1U << 0)
+#define SPM_FLAG_DIS_INFRA_PDN                (1U << 1)
+#define SPM_FLAG_DIS_DDRPHY_PDN               (1U << 2)
+#define SPM_FLAG_DIS_VCORE_DVS                (1U << 3)
+#define SPM_FLAG_DIS_VCORE_DFS                (1U << 4)
+#define SPM_FLAG_DIS_COMMON_SCENARIO          (1U << 5)
+#define SPM_FLAG_DIS_BUS_CLOCK_OFF            (1U << 6)
+#define SPM_FLAG_DIS_ATF_ABORT                (1U << 7)
+#define SPM_FLAG_KEEP_CSYSPWRUPACK_HIGH       (1U << 8)
+#define SPM_FLAG_DIS_VPROC_VSRAM_DVS          (1U << 9)
+#define SPM_FLAG_RUN_COMMON_SCENARIO          (1U << 10)
+#define SPM_FLAG_EN_MET_DEBUG_USAGE           (1U << 11)
+#define SPM_FLAG_SODI_CG_MODE                 (1U << 12)
+#define SPM_FLAG_SODI_NO_EVENT                (1U << 13)
+#define SPM_FLAG_ENABLE_SODI3                 (1U << 14)
+#define SPM_FLAG_DISABLE_MMSYS_DVFS           (1U << 15)
+#define SPM_FLAG_DIS_SYSRAM_SLEEP             (1U << 16)
+#define SPM_FLAG_DIS_SSPM_SRAM_SLEEP          (1U << 17)
+#define SPM_FLAG_DIS_VMODEM_DVS               (1U << 18)
+#define SPM_FLAG_SUSPEND_OPTION               (1U << 19)
+#define SPM_FLAG_DEEPIDLE_OPTION              (1U << 20)
+#define SPM_FLAG_SODI_OPTION                  (1U << 21)
+#define SPM_FLAG_SPM_FLAG_DONT_TOUCH_BIT22    (1U << 22)
+#define SPM_FLAG_SPM_FLAG_DONT_TOUCH_BIT23    (1U << 23)
+#define SPM_FLAG_SPM_FLAG_DONT_TOUCH_BIT24    (1U << 24)
+#define SPM_FLAG_SPM_FLAG_DONT_TOUCH_BIT25    (1U << 25)
+#define SPM_FLAG_SPM_FLAG_DONT_TOUCH_BIT26    (1U << 26)
+#define SPM_FLAG_SPM_FLAG_DONT_TOUCH_BIT27    (1U << 27)
+#define SPM_FLAG_SPM_FLAG_DONT_TOUCH_BIT28    (1U << 28)
+#define SPM_FLAG_SPM_FLAG_DONT_TOUCH_BIT29    (1U << 29)
+#define SPM_FLAG_SPM_FLAG_DONT_TOUCH_BIT30    (1U << 30)
+#define SPM_FLAG_SPM_FLAG_DONT_TOUCH_BIT31    (1U << 31)
+
+/* --- SPM Flag1 Define --- */
+#define SPM_FLAG1_RESERVED_BIT0               (1U << 0)
+#define SPM_FLAG1_ENABLE_CPU_DORMANT          (1U << 1)
+#define SPM_FLAG1_ENABLE_CPU_SLEEP_VOLT       (1U << 2)
+#define SPM_FLAG1_DISABLE_PWRAP_CLK_SWITCH    (1U << 3)
+#define SPM_FLAG1_DISABLE_ULPOSC_OFF          (1U << 4)
+#define SPM_FLAG1_VCORE_LP_0P7V               (1U << 5)
+#define SPM_FLAG1_DISABLE_MCDSR               (1U << 6)
+#define SPM_FLAG1_DISABLE_NO_RESUME           (1U << 7)
+#define SPM_FLAG1_BIG_BUCK_OFF_ENABLE         (1U << 8)
+#define SPM_FLAG1_BIG_BUCK_ON_ENABLE          (1U << 9)
+#define SPM_FLAG1_RESERVED_BIT10              (1U << 10)
+#define SPM_FLAG1_RESERVED_BIT11              (1U << 11)
+#define SPM_FLAG1_RESERVED_BIT12              (1U << 12)
+#define SPM_FLAG1_RESERVED_BIT13              (1U << 13)
+#define SPM_FLAG1_RESERVED_BIT14              (1U << 14)
+#define SPM_FLAG1_DIS_ARMPLL_OFF              (1U << 15)
+#define SPM_FLAG1_DIS_AXI_BUS_TO_26M          (1U << 16)
+#define SPM_FLAG1_DIS_IMP_DIS                 (1U << 17)
+#define SPM_FLAG1_DIS_IMP_COPY                (1U << 18)
+#define SPM_FLAG1_DIS_EMI_TOGGLE_WORKAROUND   (1U << 19)
+#define SPM_FLAG1_DIS_DRAM_ENTER_SREF         (1U << 20)
+#define SPM_FLAG1_DIS_DRAM_DLL_OFF            (1U << 21)
+#define SPM_FLAG1_DIS_PHYPLL_OFF              (1U << 22)
+#define SPM_FLAG1_DIS_MPLL_OFF                (1U << 23)
+#define SPM_FLAG1_DIS_SYSPLL_OFF              (1U << 24)
+#define SPM_FLAG1_DIS_TOP_AXI_CLK_OFF         (1U << 25)
+#define SPM_FLAG1_DIS_PCM_26M_SWITCH          (1U << 26)
+#define SPM_FLAG1_DIS_CKSQ_OFF                (1U << 27)
+#define SPM_FLAG1_DIS_SRCVOLTEN_OFF           (1U << 28)
+#define SPM_FLAG1_DIS_CHB_CG_FREE_EN          (1U << 29)
+#define SPM_FLAG1_DIS_CHA_DCM_RES             (1U << 30)
+#define SPM_FLAG1_DIS_SW_MR4                  (1U << 31)
+
+/* --- SPM DEBUG Define --- */
+#define SPM_DBG_DEBUG_IDX_26M_WAKE            (1U << 0)
+#define SPM_DBG_DEBUG_IDX_26M_SLEEP           (1U << 1)
+#define SPM_DBG_DEBUG_IDX_INFRA_WAKE          (1U << 2)
+#define SPM_DBG_DEBUG_IDX_INFRA_SLEEP         (1U << 3)
+#define SPM_DBG_DEBUG_IDX_APSRC_WAKE          (1U << 4)
+#define SPM_DBG_DEBUG_IDX_APSRC_SLEEP         (1U << 5)
+#define SPM_DBG_DEBUG_IDX_VRF18_WAKE          (1U << 6)
+#define SPM_DBG_DEBUG_IDX_VRF18_SLEEP         (1U << 7)
+#define SPM_DBG_DEBUG_IDX_DDREN_WAKE          (1U << 8)
+#define SPM_DBG_DEBUG_IDX_DDREN_SLEEP         (1U << 9)
+#define SPM_DBG_DEBUG_IDX_NFC_CKBUF_ON        (1U << 10)
+#define SPM_DBG_DEBUG_IDX_NFC_CKBUF_OFF       (1U << 11)
+#define SPM_DBG_DEBUG_IDX_CPU_PDN             (1U << 12)
+#define SPM_DBG_DEBUG_IDX_DPD                 (1U << 13)
+#define SPM_DBG_DEBUG_IDX_CONN_CKBUF_ON       (1U << 14)
+#define SPM_DBG_DEBUG_IDX_CONN_CKBUF_OFF      (1U << 15)
+#define SPM_DBG_DEBUG_IDX_VCORE_DVFS_START    (1U << 16)
+#define SPM_DBG_DEBUG_IDX_DDREN2_WAKE         (1U << 17)
+#define SPM_DBG_DEBUG_IDX_DDREN2_SLEEP        (1U << 18)
+#define SPM_DBG_DEBUG_IDX_SSPM_WFI            (1U << 19)
+#define SPM_DBG_DEBUG_IDX_SSPM_SRAM_SLP       (1U << 20)
+#define SPM_DBG_RESERVED_BIT21                (1U << 21)
+#define SPM_DBG_RESERVED_BIT22                (1U << 22)
+#define SPM_DBG_RESERVED_BIT23                (1U << 23)
+#define SPM_DBG_RESERVED_BIT24                (1U << 24)
+#define SPM_DBG_RESERVED_BIT25                (1U << 25)
+#define SPM_DBG_RESERVED_BIT26                (1U << 26)
+#define SPM_DBG_SODI1_FLAG                    (1U << 27)
+#define SPM_DBG_SODI3_FLAG                    (1U << 28)
+#define SPM_DBG_VCORE_DVFS_FLAG               (1U << 29)
+#define SPM_DBG_DEEPIDLE_FLAG                 (1U << 30)
+#define SPM_DBG_SUSPEND_FLAG                  (1U << 31)
+
+/* --- SPM DEBUG1 Define --- */
+#define SPM_DBG1_DRAM_SREF_ACK_TO             (1U << 0)
+#define SPM_DBG1_PWRAP_SLEEP_ACK_TO           (1U << 1)
+#define SPM_DBG1_PWRAP_SPI_ACK_TO             (1U << 2)
+#define SPM_DBG1_DRAM_GATE_ERR_DDREN_WAKEUP   (1U << 3)
+#define SPM_DBG1_DRAM_GATE_ERR_LEAVE_LP_SCN   (1U << 4)
+#define SPM_DBG1_RESERVED_BIT5                (1U << 5)
+#define SPM_DBG1_RESERVED_BIT6                (1U << 6)
+#define SPM_DBG1_RESERVED_BIT7                (1U << 7)
+#define SPM_DBG1_RESERVED_BIT8                (1U << 8)
+#define SPM_DBG1_RESERVED_BIT9                (1U << 9)
+#define SPM_DBG1_RESERVED_BIT10               (1U << 10)
+#define SPM_DBG1_RESERVED_BIT11               (1U << 11)
+#define SPM_DBG1_RESERVED_BIT12               (1U << 12)
+#define SPM_DBG1_RESERVED_BIT13               (1U << 13)
+#define SPM_DBG1_RESERVED_BIT14               (1U << 14)
+#define SPM_DBG1_RESERVED_BIT15               (1U << 15)
+#define SPM_DBG1_RESERVED_BIT16               (1U << 16)
+#define SPM_DBG1_RESERVED_BIT17               (1U << 17)
+#define SPM_DBG1_RESERVED_BIT18               (1U << 18)
+#define SPM_DBG1_RESERVED_BIT19               (1U << 19)
+#define SPM_DBG1_RESERVED_BIT20               (1U << 20)
+#define SPM_DBG1_RESERVED_BIT21               (1U << 21)
+#define SPM_DBG1_RESERVED_BIT22               (1U << 22)
+#define SPM_DBG1_RESERVED_BIT23               (1U << 23)
+#define SPM_DBG1_RESERVED_BIT24               (1U << 24)
+#define SPM_DBG1_RESERVED_BIT25               (1U << 25)
+#define SPM_DBG1_RESERVED_BIT26               (1U << 26)
+#define SPM_DBG1_RESERVED_BIT27               (1U << 27)
+#define SPM_DBG1_RESERVED_BIT28               (1U << 28)
+#define SPM_DBG1_RESERVED_BIT29               (1U << 29)
+#define SPM_DBG1_RESERVED_BIT30               (1U << 30)
+#define SPM_DBG1_RESERVED_BIT31               (1U << 31)
+
+/* --- R0 Define --- */
+#define R0_SC_26M_CK_OFF                      (1U << 0)
+#define R0_BIT1                               (1U << 1)
+#define R0_SC_MEM_CK_OFF                      (1U << 2)
+#define R0_SC_AXI_CK_OFF                      (1U << 3)
+#define R0_SC_DR_GATE_RETRY_EN_PCM            (1U << 4)
+#define R0_SC_MD26M_CK_OFF                    (1U << 5)
+#define R0_SC_DPY_MODE_SW_PCM                 (1U << 6)
+#define R0_SC_DMSUS_OFF_PCM                   (1U << 7)
+#define R0_SC_DPY_2ND_DLL_EN_PCM              (1U << 8)
+#define R0_BIT9                               (1U << 9)
+#define R0_SC_MPLLOUT_OFF                     (1U << 10)
+#define R0_SC_TX_TRACKING_DIS                 (1U << 11)
+#define R0_SC_DPY_DLL_EN_PCM                  (1U << 12)
+#define R0_SC_DPY_DLL_CK_EN_PCM               (1U << 13)
+#define R0_SC_DPY_VREF_EN_PCM                 (1U << 14)
+#define R0_SC_PHYPLL_EN_PCM                   (1U << 15)
+#define R0_SC_DDRPHY_FB_CK_EN_PCM             (1U << 16)
+#define R0_SC_DPY_BCLK_ENABLE                 (1U << 17)
+#define R0_SC_MPLL_OFF                        (1U << 18)
+#define R0_SC_SHU_RESTORE                     (1U << 19)
+#define R0_SC_CKSQ0_OFF                       (1U << 20)
+#define R0_SC_CKSQ1_OFF                       (1U << 21)
+#define R0_SC_DR_SHU_EN_PCM                   (1U << 22)
+#define R0_SC_DPHY_PRECAL_UP                  (1U << 23)
+#define R0_SC_MPLL_S_OFF                      (1U << 24)
+#define R0_SC_DPHY_RXDLY_TRACK_EN             (1U << 25)
+#define R0_SC_PHYPLL_SHU_EN_PCM               (1U << 26)
+#define R0_SC_PHYPLL2_SHU_EN_PCM              (1U << 27)
+#define R0_SC_PHYPLL_MODE_SW_PCM              (1U << 28)
+#define R0_SC_PHYPLL2_MODE_SW_PCM             (1U << 29)
+#define R0_SC_DR_SHU_LEVEL_PCM0               (1U << 30)
+#define R0_SC_DR_SHU_LEVEL_PCM1               (1U << 31)
+
+/* --- R7 Define --- */
+#define R7_PWRAP_SLEEP_REQ                    (1U << 0)
+#define R7_EMI_CLK_OFF_REQ                    (1U << 1)
+#define R7_TOP_MAS_PAU_REQ                    (1U << 2)
+#define R7_SPM2CKSYS_MEM_CK_MUX_UPDATE        (1U << 3)
+#define R7_PCM_CK_SEL0                        (1U << 4)
+#define R7_PCM_CK_SEL1                        (1U << 5)
+#define R7_SPM2RC_DVS_DONE                    (1U << 6)
+#define R7_FREQH_PAUSE_MPLL                   (1U << 7)
+#define R7_SC_26M_CK_SEL                      (1U << 8)
+#define R7_PCM_TIMER_SET                      (1U << 9)
+#define R7_PCM_TIMER_CLR                      (1U << 10)
+#define R7_SRCVOLTEN                          (1U << 11)
+#define R7_CSYSPWRUPACK                       (1U << 12)
+#define R7_IM_SLEEP_ENABLE                    (1U << 13)
+#define R7_SRCCLKENO_0                        (1U << 14)
+#define R7_SYSRST                             (1U << 15)
+#define R7_MD_APSRC_ACK                       (1U << 16)
+#define R7_CPU_SYS_TIMER_CLK_SEL              (1U << 17)
+#define R7_SC_AXI_DCM_DIS                     (1U << 18)
+#define R7_FREQH_PAUSE_MAIN                   (1U << 19)
+#define R7_FREQH_PAUSE_MEM                    (1U << 20)
+#define R7_SRCCLKENO_1                        (1U << 21)
+#define R7_WDT_KICK_P                         (1U << 22)
+#define R7_SPM2RC_EVENT_ABORT_ACK             (1U << 23)
+#define R7_WAKEUP_EXT_W_SEL                   (1U << 24)
+#define R7_WAKEUP_EXT_R_SEL                   (1U << 25)
+#define R7_PMIC_IRQ_REQ_EN                    (1U << 26)
+#define R7_FORCE_26M_WAKE                     (1U << 27)
+#define R7_FORCE_APSRC_WAKE                   (1U << 28)
+#define R7_FORCE_INFRA_WAKE                   (1U << 29)
+#define R7_FORCE_VRF18_WAKE                   (1U << 30)
+#define R7_SC_DR_SHORT_QUEUE_PCM              (1U << 31)
+
+/* --- R12 Define --- */
+#define R12_PCM_TIMER                         (1U << 0)
+#define R12_SSPM_WDT_EVENT_B                  (1U << 1)
+#define R12_KP_IRQ_B                          (1U << 2)
+#define R12_APWDT_EVENT_B                     (1U << 3)
+#define R12_APXGPT1_EVENT_B                   (1U << 4)
+#define R12_CONN2AP_SPM_WAKEUP_B              (1U << 5)
+#define R12_EINT_EVENT_B                      (1U << 6)
+#define R12_CONN_WDT_IRQ_B                    (1U << 7)
+#define R12_CCIF0_EVENT_B                     (1U << 8)
+#define R12_LOWBATTERY_IRQ_B                  (1U << 9)
+#define R12_SSPM_SPM_IRQ_B                    (1U << 10)
+#define R12_SCP_SPM_IRQ_B                     (1U << 11)
+#define R12_SCP_WDT_EVENT_B                   (1U << 12)
+#define R12_PCM_WDT_WAKEUP_B                  (1U << 13)
+#define R12_USB_CDSC_B                        (1U << 14)
+#define R12_USB_POWERDWN_B                    (1U << 15)
+#define R12_SYS_TIMER_EVENT_B                 (1U << 16)
+#define R12_EINT_EVENT_SECURE_B               (1U << 17)
+#define R12_CCIF1_EVENT_B                     (1U << 18)
+#define R12_UART0_IRQ_B                       (1U << 19)
+#define R12_AFE_IRQ_MCU_B                     (1U << 20)
+#define R12_THERM_CTRL_EVENT_B                (1U << 21)
+#define R12_SYS_CIRQ_IRQ_B                    (1U << 22)
+#define R12_MD2AP_PEER_EVENT_B                (1U << 23)
+#define R12_CSYSPWREQ_B                       (1U << 24)
+#define R12_MD1_WDT_B                         (1U << 25)
+#define R12_CLDMA_EVENT_B                     (1U << 26)
+#define R12_SEJ_WDT_GPT_B                     (1U << 27)
+#define R12_ALL_SSPM_WAKEUP_B                 (1U << 28)
+#define R12_CPU_IRQ_B                         (1U << 29)
+#define R12_CPU_WFI_AND_B                     (1U << 30)
+#define R12_MCUSYS_IDLE_TO_EMI_ALL_B          (1U << 31)
+
+/* --- R12ext Define --- */
+#define R12EXT_26M_WAKE                       (1U << 0)
+#define R12EXT_26M_SLEEP                      (1U << 1)
+#define R12EXT_INFRA_WAKE                     (1U << 2)
+#define R12EXT_INFRA_SLEEP                    (1U << 3)
+#define R12EXT_APSRC_WAKE                     (1U << 4)
+#define R12EXT_APSRC_SLEEP                    (1U << 5)
+#define R12EXT_VRF18_WAKE                     (1U << 6)
+#define R12EXT_VRF18_SLEEP                    (1U << 7)
+#define R12EXT_DVFS_ALL_STATE                 (1U << 8)
+#define R12EXT_DVFS_LEVEL_STATE0              (1U << 9)
+#define R12EXT_DVFS_LEVEL_STATE1              (1U << 10)
+#define R12EXT_DVFS_LEVEL_STATE2              (1U << 11)
+#define R12EXT_DDREN_WAKE                     (1U << 12)
+#define R12EXT_DDREN_SLEEP                    (1U << 13)
+#define R12EXT_NFC_CLK_BUF_WAKE               (1U << 14)
+#define R12EXT_NFC_CLK_BUF_SLEEP              (1U << 15)
+#define R12EXT_CONN_CLK_BUF_WAKE              (1U << 16)
+#define R12EXT_CONN_CLK_BUF_SLEEP             (1U << 17)
+#define R12EXT_MD_DVFS_ERROR_STATUS           (1U << 18)
+#define R12EXT_DVFS_LEVEL_STATE3              (1U << 19)
+#define R12EXT_DVFS_LEVEL_STATE4              (1U << 20)
+#define R12EXT_DVFS_LEVEL_STATE5              (1U << 21)
+#define R12EXT_DVFS_LEVEL_STATE6              (1U << 22)
+#define R12EXT_DVFS_LEVEL_STATE7              (1U << 23)
+#define R12EXT_DVFS_LEVEL_STATE8              (1U << 24)
+#define R12EXT_DVFS_LEVEL_STATE9              (1U << 25)
+#define R12EXT_DVFS_LEVEL_STATE_G0            (1U << 26)
+#define R12EXT_DVFS_LEVEL_STATE_G1            (1U << 27)
+#define R12EXT_DVFS_LEVEL_STATE_G2            (1U << 28)
+#define R12EXT_DVFS_LEVEL_STATE_G3            (1U << 29)
+#define R12EXT_HYBRID_DDREN_SLEEP             (1U << 30)
+#define R12EXT_HYBRID_DDREN_WAKE              (1U << 31)
+
+/* --- R13 Define --- */
+#define R13_EXT_SRCCLKENI_0                   (1U << 0)
+#define R13_EXT_SRCCLKENI_1                   (1U << 1)
+#define R13_MD1_SRCCLKENA                     (1U << 2)
+#define R13_MD1_APSRC_REQ                     (1U << 3)
+#define R13_CONN_DDR_EN                       (1U << 4)
+#define R13_MD2_SRCCLKENA                     (1U << 5)
+#define R13_SSPM_SRCCLKENA                    (1U << 6)
+#define R13_SSPM_APSRC_REQ                    (1U << 7)
+#define R13_MD_STATE                          (1U << 8)
+#define R13_EMI_CLK_OFF_2_ACK                 (1U << 9)
+#define R13_MM_STATE                          (1U << 10)
+#define R13_SSPM_STATE                        (1U << 11)
+#define R13_MD_DDR_EN                         (1U << 12)
+#define R13_CONN_STATE                        (1U << 13)
+#define R13_CONN_SRCCLKENA                    (1U << 14)
+#define R13_CONN_APSRC_REQ                    (1U << 15)
+#define R13_SLEEP_EVENT_STA                   (1U << 16)
+#define R13_WAKE_EVENT_STA                    (1U << 17)
+#define R13_EMI_IDLE                          (1U << 18)
+#define R13_CSYSPWRUPREQ                      (1U << 19)
+#define R13_PWRAP_SLEEP_ACK                   (1U << 20)
+#define R13_EMI_CLK_OFF_ACK_ALL               (1U << 21)
+#define R13_TOP_MAS_PAU_ACK                   (1U << 22)
+#define R13_SW_DMDRAMCSHU_ACK_ALL             (1U << 23)
+#define R13_RC2SPM_EVENT_ABORT_MASK_OR        (1U << 24)
+#define R13_DR_SHORT_QUEUE_ACK_ALL            (1U << 25)
+#define R13_INFRA_AUX_IDLE                    (1U << 26)
+#define R13_DVFS_ALL_STATE                    (1U << 27)
+#define R13_RC2SPM_EVENT_ABORT_OR             (1U << 28)
+#define R13_DRAMC_SPCMD_APSRC_REQ             (1U << 29)
+#define R13_MD1_VRF18_REQ                     (1U << 30)
+#define R13_C2K_VRF18_REQ                     (1U << 31)
+
+#define is_cpu_pdn(flags)		(!((flags) & SPM_FLAG_DIS_CPU_PDN))
+#define is_infra_pdn(flags)		(!((flags) & SPM_FLAG_DIS_INFRA_PDN))
+#define is_ddrphy_pdn(flags)		(!((flags) & SPM_FLAG_DIS_DDRPHY_PDN))
+
+#define MP0_SPMC_SRAM_DORMANT_EN	(1<<0)
+#define MP1_SPMC_SRAM_DORMANT_EN	(1<<1)
+#define MP2_SPMC_SRAM_DORMANT_EN	(1<<2)
+
+#define EVENT_VEC(event, resume, imme, pc)	\
+	(((pc) << 16) |				\
+	 (!!(imme) << 7) |			\
+	 (!!(resume) << 6) |			\
+	 ((event) & 0x3f))
+
+#define SPM_PROJECT_CODE	0xb16
+#define SPM_REGWR_CFG_KEY	(SPM_PROJECT_CODE << 16)
+
+/**************************************
+ * Config and Parameter
+ **************************************/
+#define POWER_ON_VAL1_DEF		0x00015800
+#define PCM_FSM_STA_DEF			0x00108490
+#define SPM_WAKEUP_EVENT_MASK_DEF	0xF0F92218
+#define PCM_WDT_TIMEOUT			(30 * 32768)	/* 30s */
+#define PCM_TIMER_MAX			(0xffffffff - PCM_WDT_TIMEOUT)
+
+/**************************************
+ * Define and Declare
+ **************************************/
+/* PCM_PWR_IO_EN */
+#define PCM_PWRIO_EN_R0		(1U << 0)
+#define PCM_PWRIO_EN_R7		(1U << 7)
+#define PCM_RF_SYNC_R0		(1U << 16)
+#define PCM_RF_SYNC_R6		(1U << 22)
+#define PCM_RF_SYNC_R7		(1U << 23)
+
+/* SPM_SWINT */
+#define PCM_SW_INT0		(1U << 0)
+#define PCM_SW_INT1		(1U << 1)
+#define PCM_SW_INT2		(1U << 2)
+#define PCM_SW_INT3		(1U << 3)
+#define PCM_SW_INT4		(1U << 4)
+#define PCM_SW_INT5		(1U << 5)
+#define PCM_SW_INT6		(1U << 6)
+#define PCM_SW_INT7		(1U << 7)
+#define PCM_SW_INT8		(1U << 8)
+#define PCM_SW_INT9		(1U << 9)
+#define PCM_SW_INT_ALL		(PCM_SW_INT9 | PCM_SW_INT8 | PCM_SW_INT7 | \
+				 PCM_SW_INT6 | PCM_SW_INT5 | PCM_SW_INT4 | \
+				 PCM_SW_INT3 | PCM_SW_INT2 | PCM_SW_INT1 | \
+				 PCM_SW_INT0)
+/* SPM_IRQ_MASK */
+#define ISRM_TWAM		(1U << 2)
+#define ISRM_PCM_RETURN		(1U << 3)
+#define ISRM_RET_IRQ0		(1U << 8)
+#define ISRM_RET_IRQ1		(1U << 9)
+#define ISRM_RET_IRQ2		(1U << 10)
+#define ISRM_RET_IRQ3		(1U << 11)
+#define ISRM_RET_IRQ4		(1U << 12)
+#define ISRM_RET_IRQ5		(1U << 13)
+#define ISRM_RET_IRQ6		(1U << 14)
+#define ISRM_RET_IRQ7		(1U << 15)
+#define ISRM_RET_IRQ8		(1U << 16)
+#define ISRM_RET_IRQ9		(1U << 17)
+#define ISRM_RET_IRQ_AUX	(ISRM_RET_IRQ9 | ISRM_RET_IRQ8 | \
+				 ISRM_RET_IRQ7 | ISRM_RET_IRQ6 | \
+				 ISRM_RET_IRQ5 | ISRM_RET_IRQ4 | \
+				 ISRM_RET_IRQ3 | ISRM_RET_IRQ2 | \
+				 ISRM_RET_IRQ1)
+#define ISRM_ALL_EXC_TWAM	(ISRM_RET_IRQ_AUX)
+#define ISRM_ALL		(ISRM_ALL_EXC_TWAM | ISRM_TWAM)
+
+/* SPM_IRQ_STA */
+#define ISRS_TWAM		(1U << 2)
+#define ISRS_PCM_RETURN		(1U << 3)
+#define ISRS_SW_INT0		(1U << 4)
+#define ISRC_TWAM		ISRS_TWAM
+#define ISRC_ALL_EXC_TWAM	ISRS_PCM_RETURN
+#define ISRC_ALL		(ISRC_ALL_EXC_TWAM | ISRC_TWAM)
+
+/* SPM_WAKEUP_MISC */
+#define WAKE_MISC_TWAM		(1U << 18)
+#define WAKE_MISC_PCM_TIMER	(1U << 19)
+#define WAKE_MISC_CPU_WAKE	(1U << 20)
+
+enum SPM_WAKE_SRC_LIST {
+	WAKE_SRC_R12_PCM_TIMER = (1U << 0),
+	WAKE_SRC_R12_SSPM_WDT_EVENT_B = (1U << 1),
+	WAKE_SRC_R12_KP_IRQ_B = (1U << 2),
+	WAKE_SRC_R12_APWDT_EVENT_B = (1U << 3),
+	WAKE_SRC_R12_APXGPT1_EVENT_B = (1U << 4),
+	WAKE_SRC_R12_CONN2AP_SPM_WAKEUP_B = (1U << 5),
+	WAKE_SRC_R12_EINT_EVENT_B = (1U << 6),
+	WAKE_SRC_R12_CONN_WDT_IRQ_B = (1U << 7),
+	WAKE_SRC_R12_CCIF0_EVENT_B = (1U << 8),
+	WAKE_SRC_R12_LOWBATTERY_IRQ_B = (1U << 9),
+	WAKE_SRC_R12_SSPM_SPM_IRQ_B = (1U << 10),
+	WAKE_SRC_R12_SCP_SPM_IRQ_B = (1U << 11),
+	WAKE_SRC_R12_SCP_WDT_EVENT_B = (1U << 12),
+	WAKE_SRC_R12_PCM_WDT_WAKEUP_B = (1U << 13),
+	WAKE_SRC_R12_USB_CDSC_B = (1U << 14),
+	WAKE_SRC_R12_USB_POWERDWN_B = (1U << 15),
+	WAKE_SRC_R12_SYS_TIMER_EVENT_B = (1U << 16),
+	WAKE_SRC_R12_EINT_EVENT_SECURE_B = (1U << 17),
+	WAKE_SRC_R12_CCIF1_EVENT_B = (1U << 18),
+	WAKE_SRC_R12_UART0_IRQ_B = (1U << 19),
+	WAKE_SRC_R12_AFE_IRQ_MCU_B = (1U << 20),
+	WAKE_SRC_R12_THERM_CTRL_EVENT_B = (1U << 21),
+	WAKE_SRC_R12_SYS_CIRQ_IRQ_B = (1U << 22),
+	WAKE_SRC_R12_MD2AP_PEER_EVENT_B = (1U << 23),
+	WAKE_SRC_R12_CSYSPWREQ_B = (1U << 24),
+	WAKE_SRC_R12_MD1_WDT_B = (1U << 25),
+	WAKE_SRC_R12_CLDMA_EVENT_B = (1U << 26),
+	WAKE_SRC_R12_SEJ_WDT_GPT_B = (1U << 27),
+	WAKE_SRC_R12_ALL_SSPM_WAKEUP_B = (1U << 28),
+	WAKE_SRC_R12_CPU_IRQ_B = (1U << 29),
+	WAKE_SRC_R12_CPU_WFI_AND_B = (1U << 30),
+};
+
+struct pcm_desc {
+	const char *version;
+	const uint32_t *base;
+	const uint32_t base_dma;
+	const uint32_t size;
+	const uint32_t sess;
+	const uint32_t replace;
+	const uint32_t addr_2nd;
+	const uint32_t reserved;
+
+	uint32_t vec0;
+	uint32_t vec1;
+	uint32_t vec2;
+	uint32_t vec3;
+	uint32_t vec4;
+	uint32_t vec5;
+	uint32_t vec6;
+	uint32_t vec7;
+	uint32_t vec8;
+	uint32_t vec9;
+	uint32_t vec10;
+	uint32_t vec11;
+	uint32_t vec12;
+	uint32_t vec13;
+	uint32_t vec14;
+	uint32_t vec15;
+};
+
+struct pwr_ctrl {
+	uint32_t pcm_flags;
+	uint32_t pcm_flags1;
+	uint32_t timer_val;
+	uint32_t wake_src;
+
+	/* SPM_AP_STANDBY_CON */
+	uint8_t wfi_op;
+	uint8_t mp0_cputop_idle_mask;
+	uint8_t mp1_cputop_idle_mask;
+	uint8_t mcusys_idle_mask;
+	uint8_t mm_mask_b;
+	uint8_t md_ddr_en_0_dbc_en;
+	uint8_t md_ddr_en_1_dbc_en;
+	uint8_t md_mask_b;
+	uint8_t sspm_mask_b;
+	uint8_t scp_mask_b;
+	uint8_t srcclkeni_mask_b;
+	uint8_t md_apsrc_1_sel;
+	uint8_t md_apsrc_0_sel;
+	uint8_t conn_ddr_en_dbc_en;
+	uint8_t conn_mask_b;
+	uint8_t conn_apsrc_sel;
+
+	/* SPM_SRC_REQ */
+	uint8_t spm_apsrc_req;
+	uint8_t spm_f26m_req;
+	uint8_t spm_infra_req;
+	uint8_t spm_vrf18_req;
+	uint8_t spm_ddren_req;
+	uint8_t spm_rsv_src_req;
+	uint8_t spm_ddren_2_req;
+	uint8_t cpu_md_dvfs_sop_force_on;
+
+	/* SPM_SRC_MASK */
+	uint8_t csyspwreq_mask;
+	uint8_t ccif0_md_event_mask_b;
+	uint8_t ccif0_ap_event_mask_b;
+	uint8_t ccif1_md_event_mask_b;
+	uint8_t ccif1_ap_event_mask_b;
+	uint8_t ccif2_md_event_mask_b;
+	uint8_t ccif2_ap_event_mask_b;
+	uint8_t ccif3_md_event_mask_b;
+	uint8_t ccif3_ap_event_mask_b;
+	uint8_t md_srcclkena_0_infra_mask_b;
+	uint8_t md_srcclkena_1_infra_mask_b;
+	uint8_t conn_srcclkena_infra_mask_b;
+	uint8_t ufs_infra_req_mask_b;
+	uint8_t srcclkeni_infra_mask_b;
+	uint8_t md_apsrc_req_0_infra_mask_b;
+	uint8_t md_apsrc_req_1_infra_mask_b;
+	uint8_t conn_apsrcreq_infra_mask_b;
+	uint8_t ufs_srcclkena_mask_b;
+	uint8_t md_vrf18_req_0_mask_b;
+	uint8_t md_vrf18_req_1_mask_b;
+	uint8_t ufs_vrf18_req_mask_b;
+	uint8_t gce_vrf18_req_mask_b;
+	uint8_t conn_infra_req_mask_b;
+	uint8_t gce_apsrc_req_mask_b;
+	uint8_t disp0_apsrc_req_mask_b;
+	uint8_t disp1_apsrc_req_mask_b;
+	uint8_t mfg_req_mask_b;
+	uint8_t vdec_req_mask_b;
+
+	/* SPM_SRC2_MASK */
+	uint8_t md_ddr_en_0_mask_b;
+	uint8_t md_ddr_en_1_mask_b;
+	uint8_t conn_ddr_en_mask_b;
+	uint8_t ddren_sspm_apsrc_req_mask_b;
+	uint8_t ddren_scp_apsrc_req_mask_b;
+	uint8_t disp0_ddren_mask_b;
+	uint8_t disp1_ddren_mask_b;
+	uint8_t gce_ddren_mask_b;
+	uint8_t ddren_emi_self_refresh_ch0_mask_b;
+	uint8_t ddren_emi_self_refresh_ch1_mask_b;
+
+	/* SPM_WAKEUP_EVENT_MASK */
+	uint32_t spm_wakeup_event_mask;
+
+	/* SPM_WAKEUP_EVENT_EXT_MASK */
+	uint32_t spm_wakeup_event_ext_mask;
+
+	/* SPM_SRC3_MASK */
+	uint8_t md_ddr_en_2_0_mask_b;
+	uint8_t md_ddr_en_2_1_mask_b;
+	uint8_t conn_ddr_en_2_mask_b;
+	uint8_t ddren2_sspm_apsrc_req_mask_b;
+	uint8_t ddren2_scp_apsrc_req_mask_b;
+	uint8_t disp0_ddren2_mask_b;
+	uint8_t disp1_ddren2_mask_b;
+	uint8_t gce_ddren2_mask_b;
+	uint8_t ddren2_emi_self_refresh_ch0_mask_b;
+	uint8_t ddren2_emi_self_refresh_ch1_mask_b;
+
+	uint8_t mp0_cpu0_wfi_en;
+	uint8_t mp0_cpu1_wfi_en;
+	uint8_t mp0_cpu2_wfi_en;
+	uint8_t mp0_cpu3_wfi_en;
+
+	uint8_t mp1_cpu0_wfi_en;
+	uint8_t mp1_cpu1_wfi_en;
+	uint8_t mp1_cpu2_wfi_en;
+	uint8_t mp1_cpu3_wfi_en;
+};
+
+struct wake_status {
+	uint32_t assert_pc;
+	uint32_t r12;
+	uint32_t r12_ext;
+	uint32_t raw_sta;
+	uint32_t raw_ext_sta;
+	uint32_t wake_misc;
+	uint32_t timer_out;
+	uint32_t r13;
+	uint32_t r15;
+	uint32_t idle_sta;
+	uint32_t req_sta;
+	uint32_t debug_flag;
+	uint32_t debug_flag1;
+	uint32_t event_reg;
+	uint32_t isr;
+	uint32_t sw_flag;
+	uint32_t sw_flag1;
+	uint32_t log_index;
+};
+
+typedef struct spm_data {
+	unsigned int cmd;
+	union {
+		struct {
+			unsigned int sys_timestamp_l;
+			unsigned int sys_timestamp_h;
+			unsigned int sys_src_clk_l;
+			unsigned int sys_src_clk_h;
+			unsigned int spm_opt;
+		} suspend;
+		struct {
+			unsigned int args1;
+			unsigned int args2;
+			unsigned int args3;
+			unsigned int args4;
+			unsigned int args5;
+			unsigned int args6;
+			unsigned int args7;
+		} args;
+	} u;
+} spm_data_t;
+
+enum {
+	SPM_SUSPEND,
+	SPM_RESUME
+};
+
+extern void spm_disable_pcm_timer(void);
+extern void spm_set_bootaddr(unsigned long bootaddr);
+extern void spm_set_cpu_status(int cpu);
+extern void spm_set_power_control(const struct pwr_ctrl *pwrctrl);
+extern void spm_set_wakeup_event(const struct pwr_ctrl *pwrctrl);
+extern void spm_set_pcm_flags(const struct pwr_ctrl *pwrctrl);
+extern void spm_send_cpu_wakeup_event(void);
+extern void spm_get_wakeup_status(struct wake_status *wakesta);
+extern void spm_clean_after_wakeup(void);
+extern void spm_output_wake_reason(struct wake_status *wakesta,
+				   const char *scenario);
+extern void spm_set_pcm_wdt(int en);
+extern void spm_lock_get(void);
+extern void spm_lock_release(void);
+extern void spm_boot_init(void);
+extern const char *spm_get_firmware_version(void);
+
+#endif /* SPM_H */
diff --git a/plat/mediatek/mt8183/drivers/spm/spm_pmic_wrap.c b/plat/mediatek/mt8183/drivers/spm/spm_pmic_wrap.c
new file mode 100644
index 0000000..ce85272
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/spm/spm_pmic_wrap.c
@@ -0,0 +1,170 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include <platform_def.h>
+#include <spm.h>
+#include <spm_pmic_wrap.h>
+#include <lib/libc/string.h>
+
+#define SLEEP_REG_MD_SPM_DVFS_CMD20	(SLEEP_REG_MD_BASE + 0x010)
+#define SLEEP_REG_MD_SPM_DVFS_CMD21	(SLEEP_REG_MD_BASE + 0x014)
+#define SLEEP_REG_MD_SPM_DVFS_CMD22	(SLEEP_REG_MD_BASE + 0x018)
+#define SLEEP_REG_MD_SPM_DVFS_CMD23	(SLEEP_REG_MD_BASE + 0x01C)
+
+/* PMIC_WRAP -> PMIC MT6358 */
+#define VCORE_BASE_UV 50000
+#define VOLT_TO_PMIC_VAL(volt)  (((volt) - VCORE_BASE_UV + 625 - 1) / 625)
+#define PMIC_VAL_TO_VOLT(pmic)  (((pmic) * 625) + VCORE_BASE_UV)
+
+#define DEFAULT_VOLT_VSRAM      (100000)
+#define DEFAULT_VOLT_VCORE      (100000)
+#define NR_PMIC_WRAP_CMD	(NR_IDX_ALL)
+#define MAX_RETRY_COUNT		(100)
+#define SPM_DATA_SHIFT		(16)
+
+#define BUCK_VCORE_ELR0		0x14AA
+#define BUCK_VPROC12_CON0	0x1408
+#define BUCK_VPROC11_CON0	0x1388
+#define TOP_SPI_CON0		0x044C
+#define LDO_VSRAM_PROC12_CON0	0x1B88
+#define LDO_VSRAM_PROC11_CON0	0x1B46
+#define BUCK_VMODEM_ELR0	0x15A6
+
+struct pmic_wrap_cmd {
+	unsigned long cmd_addr;
+	unsigned long cmd_wdata;
+};
+
+struct pmic_wrap_setting {
+	enum pmic_wrap_phase_id phase;
+	struct pmic_wrap_cmd addr[NR_PMIC_WRAP_CMD];
+	struct {
+		struct {
+			unsigned long cmd_addr;
+			unsigned long cmd_wdata;
+		} _[NR_PMIC_WRAP_CMD];
+		const int nr_idx;
+	} set[NR_PMIC_WRAP_PHASE];
+};
+
+static struct pmic_wrap_setting pw = {
+	.phase = NR_PMIC_WRAP_PHASE,
+	.addr = {{0, 0} },
+	.set[PMIC_WRAP_PHASE_ALLINONE] = {
+		._[CMD_0]    = {BUCK_VCORE_ELR0, VOLT_TO_PMIC_VAL(70000),},
+		._[CMD_1]    = {BUCK_VCORE_ELR0, VOLT_TO_PMIC_VAL(80000),},
+		._[CMD_2]    = {BUCK_VPROC12_CON0, 0x3,},
+		._[CMD_3]    = {BUCK_VPROC12_CON0, 0x1,},
+		._[CMD_4]    = {BUCK_VPROC11_CON0, 0x3,},
+		._[CMD_5]    = {BUCK_VPROC11_CON0, 0x1,},
+		._[CMD_6]    = {TOP_SPI_CON0, 0x1,},
+		._[CMD_7]    = {TOP_SPI_CON0, 0x0,},
+		._[CMD_8]    = {BUCK_VPROC12_CON0, 0x0,},
+		._[CMD_9]    = {BUCK_VPROC12_CON0, 0x1,},
+		._[CMD_10]   = {BUCK_VPROC11_CON0, 0x0,},
+		._[CMD_11]   = {BUCK_VPROC11_CON0, 0x1,},
+		._[CMD_12]   = {LDO_VSRAM_PROC12_CON0, 0x0,},
+		._[CMD_13]   = {LDO_VSRAM_PROC12_CON0, 0x1,},
+		._[CMD_14]   = {LDO_VSRAM_PROC11_CON0, 0x0,},
+		._[CMD_15]   = {LDO_VSRAM_PROC11_CON0, 0x1,},
+		._[CMD_20]   = {BUCK_VMODEM_ELR0, VOLT_TO_PMIC_VAL(55000),},
+		._[CMD_21]   = {BUCK_VCORE_ELR0, VOLT_TO_PMIC_VAL(60000),},
+		._[CMD_22]   = {LDO_VSRAM_PROC11_CON0, 0x3,},
+		._[CMD_23]   = {LDO_VSRAM_PROC11_CON0, 0x1,},
+		.nr_idx = NR_IDX_ALL
+	}
+};
+
+void _mt_spm_pmic_table_init(void)
+{
+	struct pmic_wrap_cmd pwrap_cmd_default[NR_PMIC_WRAP_CMD] = {
+		{(uint32_t)SPM_DVFS_CMD0, (uint32_t)SPM_DVFS_CMD0,},
+		{(uint32_t)SPM_DVFS_CMD1, (uint32_t)SPM_DVFS_CMD1,},
+		{(uint32_t)SPM_DVFS_CMD2, (uint32_t)SPM_DVFS_CMD2,},
+		{(uint32_t)SPM_DVFS_CMD3, (uint32_t)SPM_DVFS_CMD3,},
+		{(uint32_t)SPM_DVFS_CMD4, (uint32_t)SPM_DVFS_CMD4,},
+		{(uint32_t)SPM_DVFS_CMD5, (uint32_t)SPM_DVFS_CMD5,},
+		{(uint32_t)SPM_DVFS_CMD6, (uint32_t)SPM_DVFS_CMD6,},
+		{(uint32_t)SPM_DVFS_CMD7, (uint32_t)SPM_DVFS_CMD7,},
+		{(uint32_t)SPM_DVFS_CMD8, (uint32_t)SPM_DVFS_CMD8,},
+		{(uint32_t)SPM_DVFS_CMD9, (uint32_t)SPM_DVFS_CMD9,},
+		{(uint32_t)SPM_DVFS_CMD10, (uint32_t)SPM_DVFS_CMD10,},
+		{(uint32_t)SPM_DVFS_CMD11, (uint32_t)SPM_DVFS_CMD11,},
+		{(uint32_t)SPM_DVFS_CMD12, (uint32_t)SPM_DVFS_CMD12,},
+		{(uint32_t)SPM_DVFS_CMD13, (uint32_t)SPM_DVFS_CMD13,},
+		{(uint32_t)SPM_DVFS_CMD14, (uint32_t)SPM_DVFS_CMD14,},
+		{(uint32_t)SPM_DVFS_CMD15, (uint32_t)SPM_DVFS_CMD15,},
+		{(uint32_t)SLEEP_REG_MD_SPM_DVFS_CMD20,
+		 (uint32_t)SLEEP_REG_MD_SPM_DVFS_CMD20,},
+		{(uint32_t)SLEEP_REG_MD_SPM_DVFS_CMD21,
+		 (uint32_t)SLEEP_REG_MD_SPM_DVFS_CMD21,},
+		{(uint32_t)SLEEP_REG_MD_SPM_DVFS_CMD22,
+		 (uint32_t)SLEEP_REG_MD_SPM_DVFS_CMD22,},
+		{(uint32_t)SLEEP_REG_MD_SPM_DVFS_CMD23,
+		 (uint32_t)SLEEP_REG_MD_SPM_DVFS_CMD23,}
+	};
+
+	memcpy(pw.addr, pwrap_cmd_default, sizeof(pwrap_cmd_default));
+}
+
+void mt_spm_pmic_wrap_set_phase(enum pmic_wrap_phase_id phase)
+{
+	uint32_t idx, addr, data;
+
+	if (phase >= NR_PMIC_WRAP_PHASE)
+		return;
+
+	if (pw.phase == phase)
+		return;
+
+	if (pw.addr[0].cmd_addr == 0)
+		_mt_spm_pmic_table_init();
+
+	pw.phase = phase;
+
+	mmio_write_32(POWERON_CONFIG_EN, SPM_REGWR_CFG_KEY |
+		      BCLK_CG_EN_LSB | MD_BCLK_CG_EN_LSB);
+	for (idx = 0; idx < pw.set[phase].nr_idx; idx++) {
+		addr = pw.set[phase]._[idx].cmd_addr << SPM_DATA_SHIFT;
+		data = pw.set[phase]._[idx].cmd_wdata;
+		mmio_write_32(pw.addr[idx].cmd_addr, addr | data);
+	}
+}
+
+void mt_spm_pmic_wrap_set_cmd(enum pmic_wrap_phase_id phase, uint32_t idx,
+			      uint32_t cmd_wdata)
+{
+	uint32_t addr;
+
+	if (phase >= NR_PMIC_WRAP_PHASE)
+		return;
+
+	if (idx >= pw.set[phase].nr_idx)
+		return;
+
+	pw.set[phase]._[idx].cmd_wdata = cmd_wdata;
+
+	mmio_write_32(POWERON_CONFIG_EN, SPM_REGWR_CFG_KEY |
+		      BCLK_CG_EN_LSB | MD_BCLK_CG_EN_LSB);
+	if (pw.phase == phase) {
+		addr = pw.set[phase]._[idx].cmd_addr << SPM_DATA_SHIFT;
+		mmio_write_32(pw.addr[idx].cmd_addr, addr | cmd_wdata);
+	}
+}
+
+uint64_t mt_spm_pmic_wrap_get_cmd(enum pmic_wrap_phase_id phase, uint32_t idx)
+{
+	if (phase >= NR_PMIC_WRAP_PHASE)
+		return 0;
+
+	if (idx >= pw.set[phase].nr_idx)
+		return 0;
+
+	return pw.set[phase]._[idx].cmd_wdata;
+}
+
diff --git a/plat/mediatek/mt8183/drivers/spm/spm_pmic_wrap.h b/plat/mediatek/mt8183/drivers/spm/spm_pmic_wrap.h
new file mode 100644
index 0000000..194d347
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/spm/spm_pmic_wrap.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/****************************************************************
+ * Auto generated by DE, please DO NOT modify this file directly.
+ *****************************************************************/
+
+#ifndef SPM_PMIC_WRAP__H
+#define SPM_PMIC_WRAP__H
+
+enum pmic_wrap_phase_id {
+	PMIC_WRAP_PHASE_ALLINONE,
+	NR_PMIC_WRAP_PHASE
+};
+
+/* IDX mapping */
+enum {
+	CMD_0,        /* 0x0 *//* PMIC_WRAP_PHASE_ALLINONE */
+	CMD_1,        /* 0x1 */
+	CMD_2,        /* 0x2 */
+	CMD_3,        /* 0x3 */
+	CMD_4,        /* 0x4 */
+	CMD_5,        /* 0x5 */
+	CMD_6,        /* 0x6 */
+	CMD_7,        /* 0x7 */
+	CMD_8,        /* 0x8 */
+	CMD_9,        /* 0x9 */
+	CMD_10,       /* 0xA */
+	CMD_11,       /* 0xB */
+	CMD_12,       /* 0xC */
+	CMD_13,       /* 0xD */
+	CMD_14,       /* 0xE */
+	CMD_15,       /* 0xF */
+	CMD_20,       /* 0x14 */
+	CMD_21,       /* 0x15 */
+	CMD_22,       /* 0x16 */
+	CMD_23,       /* 0x17 */
+	NR_IDX_ALL
+};
+
+/* APIs */
+void mt_spm_pmic_wrap_set_phase(enum pmic_wrap_phase_id phase);
+void mt_spm_pmic_wrap_set_cmd(enum pmic_wrap_phase_id phase,
+			      uint32_t idx, uint32_t cmd_wdata);
+uint64_t mt_spm_pmic_wrap_get_cmd(enum pmic_wrap_phase_id phase, uint32_t idx);
+#endif /* SPM_PMIC_WRAP__H */
+
diff --git a/plat/mediatek/mt8183/drivers/spm/spm_suspend.c b/plat/mediatek/mt8183/drivers/spm/spm_suspend.c
new file mode 100644
index 0000000..b9ac19f
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/spm/spm_suspend.c
@@ -0,0 +1,255 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <mt_gic_v3.h>
+#include <lib/mmio.h>
+#include <platform_def.h>
+#include <pmic.h>
+#include <spm.h>
+#include <uart.h>
+
+#define SPM_SYSCLK_SETTLE       99
+
+#define WAKE_SRC_FOR_SUSPEND \
+	(WAKE_SRC_R12_PCM_TIMER | \
+	 WAKE_SRC_R12_SSPM_WDT_EVENT_B | \
+	 WAKE_SRC_R12_KP_IRQ_B | \
+	 WAKE_SRC_R12_CONN2AP_SPM_WAKEUP_B | \
+	 WAKE_SRC_R12_EINT_EVENT_B | \
+	 WAKE_SRC_R12_CONN_WDT_IRQ_B | \
+	 WAKE_SRC_R12_CCIF0_EVENT_B | \
+	 WAKE_SRC_R12_SSPM_SPM_IRQ_B | \
+	 WAKE_SRC_R12_SCP_SPM_IRQ_B | \
+	 WAKE_SRC_R12_SCP_WDT_EVENT_B | \
+	 WAKE_SRC_R12_USB_CDSC_B | \
+	 WAKE_SRC_R12_USB_POWERDWN_B | \
+	 WAKE_SRC_R12_SYS_TIMER_EVENT_B | \
+	 WAKE_SRC_R12_EINT_EVENT_SECURE_B | \
+	 WAKE_SRC_R12_CCIF1_EVENT_B | \
+	 WAKE_SRC_R12_MD2AP_PEER_EVENT_B | \
+	 WAKE_SRC_R12_MD1_WDT_B | \
+	 WAKE_SRC_R12_CLDMA_EVENT_B | \
+	 WAKE_SRC_R12_SEJ_WDT_GPT_B)
+
+#define SLP_PCM_FLAGS \
+	(SPM_FLAG_DIS_VCORE_DVS	| SPM_FLAG_DIS_VCORE_DFS | \
+	 SPM_FLAG_DIS_ATF_ABORT | SPM_FLAG_DISABLE_MMSYS_DVFS | \
+	 SPM_FLAG_DIS_INFRA_PDN | SPM_FLAG_SUSPEND_OPTION)
+
+#define SLP_PCM_FLAGS1 \
+	(SPM_FLAG1_DISABLE_MCDSR)
+
+static const struct pwr_ctrl suspend_ctrl = {
+	.wake_src = WAKE_SRC_FOR_SUSPEND,
+	.pcm_flags = SLP_PCM_FLAGS,
+	.pcm_flags1 = SLP_PCM_FLAGS1,
+
+	/* SPM_AP_STANDBY_CON */
+	.wfi_op = 0x1,
+	.mp0_cputop_idle_mask = 0,
+	.mp1_cputop_idle_mask = 0,
+	.mcusys_idle_mask = 0,
+	.mm_mask_b = 0,
+	.md_ddr_en_0_dbc_en = 0x1,
+	.md_ddr_en_1_dbc_en = 0,
+	.md_mask_b = 0x1,
+	.sspm_mask_b = 0x1,
+	.scp_mask_b = 0x1,
+	.srcclkeni_mask_b = 0x1,
+	.md_apsrc_1_sel = 0,
+	.md_apsrc_0_sel = 0,
+	.conn_ddr_en_dbc_en = 0x1,
+	.conn_mask_b = 0x1,
+	.conn_apsrc_sel = 0,
+
+	/* SPM_SRC_REQ */
+	.spm_apsrc_req = 0,
+	.spm_f26m_req = 0,
+	.spm_infra_req = 0,
+	.spm_vrf18_req = 0,
+	.spm_ddren_req = 0,
+	.spm_rsv_src_req = 0,
+	.spm_ddren_2_req = 0,
+	.cpu_md_dvfs_sop_force_on = 0,
+
+	/* SPM_SRC_MASK */
+	.csyspwreq_mask = 0x1,
+	.ccif0_md_event_mask_b = 0x1,
+	.ccif0_ap_event_mask_b = 0x1,
+	.ccif1_md_event_mask_b = 0x1,
+	.ccif1_ap_event_mask_b = 0x1,
+	.ccif2_md_event_mask_b = 0x1,
+	.ccif2_ap_event_mask_b = 0x1,
+	.ccif3_md_event_mask_b = 0x1,
+	.ccif3_ap_event_mask_b = 0x1,
+	.md_srcclkena_0_infra_mask_b = 0x1,
+	.md_srcclkena_1_infra_mask_b = 0,
+	.conn_srcclkena_infra_mask_b = 0,
+	.ufs_infra_req_mask_b = 0,
+	.srcclkeni_infra_mask_b = 0,
+	.md_apsrc_req_0_infra_mask_b = 0x1,
+	.md_apsrc_req_1_infra_mask_b = 0x1,
+	.conn_apsrcreq_infra_mask_b = 0x1,
+	.ufs_srcclkena_mask_b = 0,
+	.md_vrf18_req_0_mask_b = 0,
+	.md_vrf18_req_1_mask_b = 0,
+	.ufs_vrf18_req_mask_b = 0,
+	.gce_vrf18_req_mask_b = 0,
+	.conn_infra_req_mask_b = 0x1,
+	.gce_apsrc_req_mask_b = 0,
+	.disp0_apsrc_req_mask_b = 0,
+	.disp1_apsrc_req_mask_b = 0,
+	.mfg_req_mask_b = 0,
+	.vdec_req_mask_b = 0,
+
+	/* SPM_SRC2_MASK */
+	.md_ddr_en_0_mask_b = 0x1,
+	.md_ddr_en_1_mask_b = 0,
+	.conn_ddr_en_mask_b = 0x1,
+	.ddren_sspm_apsrc_req_mask_b = 0x1,
+	.ddren_scp_apsrc_req_mask_b = 0x1,
+	.disp0_ddren_mask_b = 0x1,
+	.disp1_ddren_mask_b = 0x1,
+	.gce_ddren_mask_b = 0x1,
+	.ddren_emi_self_refresh_ch0_mask_b = 0,
+	.ddren_emi_self_refresh_ch1_mask_b = 0,
+
+	/* SPM_WAKEUP_EVENT_MASK */
+	.spm_wakeup_event_mask = 0xF1782218,
+
+	/* SPM_WAKEUP_EVENT_EXT_MASK */
+	.spm_wakeup_event_ext_mask = 0xFFFFFFFF,
+
+	/* SPM_SRC3_MASK */
+	.md_ddr_en_2_0_mask_b = 0x1,
+	.md_ddr_en_2_1_mask_b = 0,
+	.conn_ddr_en_2_mask_b = 0x1,
+	.ddren2_sspm_apsrc_req_mask_b = 0x1,
+	.ddren2_scp_apsrc_req_mask_b = 0x1,
+	.disp0_ddren2_mask_b = 0,
+	.disp1_ddren2_mask_b = 0,
+	.gce_ddren2_mask_b = 0,
+	.ddren2_emi_self_refresh_ch0_mask_b = 0,
+	.ddren2_emi_self_refresh_ch1_mask_b = 0,
+
+	.mp0_cpu0_wfi_en = 0x1,
+	.mp0_cpu1_wfi_en = 0x1,
+	.mp0_cpu2_wfi_en = 0x1,
+	.mp0_cpu3_wfi_en = 0x1,
+
+	.mp1_cpu0_wfi_en = 0x1,
+	.mp1_cpu1_wfi_en = 0x1,
+	.mp1_cpu2_wfi_en = 0x1,
+	.mp1_cpu3_wfi_en = 0x1
+};
+
+static uint32_t spm_set_sysclk_settle(void)
+{
+	mmio_write_32(SPM_CLK_SETTLE, SPM_SYSCLK_SETTLE);
+	return mmio_read_32(SPM_CLK_SETTLE);
+}
+
+void go_to_sleep_before_wfi(void)
+{
+	int cpu = MPIDR_AFFLVL0_VAL(read_mpidr());
+	uint32_t settle;
+
+	settle = spm_set_sysclk_settle();
+	spm_set_cpu_status(cpu);
+	spm_set_power_control(&suspend_ctrl);
+	spm_set_wakeup_event(&suspend_ctrl);
+	spm_set_pcm_flags(&suspend_ctrl);
+	spm_send_cpu_wakeup_event();
+	spm_set_pcm_wdt(0);
+	spm_disable_pcm_timer();
+
+	if (is_infra_pdn(suspend_ctrl.pcm_flags))
+		mt_uart_save();
+
+	if (!mt_console_uart_cg_status())
+		console_switch_state(CONSOLE_FLAG_BOOT);
+
+	INFO("cpu%d: \"%s\", wakesrc = 0x%x, pcm_con1 = 0x%x\n",
+	     cpu, spm_get_firmware_version(), suspend_ctrl.wake_src,
+	     mmio_read_32(PCM_CON1));
+	INFO("settle = %u, sec = %u, sw_flag = 0x%x 0x%x, src_req = 0x%x\n",
+	     settle, mmio_read_32(PCM_TIMER_VAL) / 32768,
+	     suspend_ctrl.pcm_flags, suspend_ctrl.pcm_flags1,
+	     mmio_read_32(SPM_SRC_REQ));
+
+	if (!mt_console_uart_cg_status())
+		console_switch_state(CONSOLE_FLAG_RUNTIME);
+}
+
+static void go_to_sleep_after_wfi(void)
+{
+	struct wake_status spm_wakesta;
+
+	if (is_infra_pdn(suspend_ctrl.pcm_flags))
+		mt_uart_restore();
+
+	spm_set_pcm_wdt(0);
+	spm_get_wakeup_status(&spm_wakesta);
+	spm_clean_after_wakeup();
+
+	if (!mt_console_uart_cg_status())
+		console_switch_state(CONSOLE_FLAG_BOOT);
+
+	spm_output_wake_reason(&spm_wakesta, "suspend");
+
+	if (!mt_console_uart_cg_status())
+		console_switch_state(CONSOLE_FLAG_RUNTIME);
+}
+
+static void spm_enable_armpll_l(void)
+{
+	/* power on */
+	mmio_setbits_32(ARMPLL_L_PWR_CON0, 0x1);
+
+	/* clear isolation */
+	mmio_clrbits_32(ARMPLL_L_PWR_CON0, 0x2);
+
+	/* enable pll */
+	mmio_setbits_32(ARMPLL_L_CON0, 0x1);
+
+	/* Add 20us delay for turning on PLL */
+	udelay(20);
+}
+
+static void spm_disable_armpll_l(void)
+{
+	/* disable pll */
+	mmio_clrbits_32(ARMPLL_L_CON0, 0x1);
+
+	/* isolation */
+	mmio_setbits_32(ARMPLL_L_PWR_CON0, 0x2);
+
+	/* power off */
+	mmio_clrbits_32(ARMPLL_L_PWR_CON0, 0x1);
+}
+
+void spm_system_suspend(void)
+{
+	spm_disable_armpll_l();
+	bcpu_enable(0);
+	bcpu_sram_enable(0);
+	spm_lock_get();
+	go_to_sleep_before_wfi();
+	spm_lock_release();
+}
+
+void spm_system_suspend_finish(void)
+{
+	spm_lock_get();
+	go_to_sleep_after_wfi();
+	spm_lock_release();
+	spm_enable_armpll_l();
+	bcpu_sram_enable(1);
+	bcpu_enable(1);
+}
diff --git a/plat/mediatek/mt8183/drivers/spm/spm_suspend.h b/plat/mediatek/mt8183/drivers/spm/spm_suspend.h
new file mode 100644
index 0000000..e127c2e
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/spm/spm_suspend.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __SPM_SUSPEND_H__
+#define __SPM_SUSPEND_H__
+
+void spm_system_suspend(void);
+void spm_system_suspend_finish(void);
+
+#endif /* __SPM_SUSPEND_H__*/
diff --git a/plat/mediatek/mt8183/drivers/spmc/mtspmc_private.h b/plat/mediatek/mt8183/drivers/spmc/mtspmc_private.h
index 613d471..2228e63 100644
--- a/plat/mediatek/mt8183/drivers/spmc/mtspmc_private.h
+++ b/plat/mediatek/mt8183/drivers/spmc/mtspmc_private.h
@@ -136,8 +136,7 @@
 /*
  * MCU configuration registers
  */
-#define MCUCFG_MP0_AXI_CONFIG	((uintptr_t)&mt8183_mcucfg->mp0_axi_config)
-#define MCUCFG_MP1_AXI_CONFIG	((uintptr_t)&mt8183_mcucfg->mp1_axi_config)
+
 /* bit-fields of MCUCFG_MP?_AXI_CONFIG */
 #define MCUCFG_AXI_CONFIG_BROADCASTINNER	(1 << 0)
 #define MCUCFG_AXI_CONFIG_BROADCASTOUTER	(1 << 1)
@@ -146,11 +145,6 @@
 #define MCUCFG_AXI_CONFIG_ACINACTM		(1 << 4)
 #define MCUCFG_AXI_CONFIG_AINACTS		(1 << 5)
 
-/* per_cpu registers for MCUCFG_MP?_AXI_CONFIG */
-static const struct per_cpu_reg MCUCFG_SCUCTRL[] = {
-	[0] = { .cluster_addr = MCUCFG_MP0_AXI_CONFIG },
-	[1] = { .cluster_addr = MCUCFG_MP1_AXI_CONFIG },
-};
 
 #define MCUCFG_MP0_MISC_CONFIG2 ((uintptr_t)&mt8183_mcucfg->mp0_misc_config[2])
 #define MCUCFG_MP0_MISC_CONFIG3 ((uintptr_t)&mt8183_mcucfg->mp0_misc_config[3])
diff --git a/plat/mediatek/mt8183/drivers/sspm/sspm.c b/plat/mediatek/mt8183/drivers/sspm/sspm.c
new file mode 100644
index 0000000..3917638
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/sspm/sspm.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <errno.h>
+#include <lib/mmio.h>
+#include <sspm.h>
+
+static void memcpy_to_sspm(uint32_t dst, uint32_t *src, uint32_t len)
+{
+	while (len--) {
+		mmio_write_32(dst, *src);
+		dst += sizeof(uint32_t);
+		src++;
+	}
+}
+
+static void memcpy_from_sspm(uint32_t *dst, uint32_t src, uint32_t len)
+{
+	while (len--) {
+		*dst = mmio_read_32(src);
+		dst++;
+		src += sizeof(uint32_t);
+	}
+}
+
+int sspm_mbox_read(uint32_t slot, uint32_t *data, uint32_t len)
+{
+	if (slot >= 32)	{
+		ERROR("%s:slot = %d\n", __func__, slot);
+		return -EINVAL;
+	}
+
+	if (data)
+		memcpy_from_sspm(data,
+				 MBOX3_BASE + slot * 4,
+				 len);
+
+	return 0;
+}
+
+int sspm_mbox_write(uint32_t slot, uint32_t *data, uint32_t len)
+{
+	if (slot >= 32) {
+		ERROR("%s:slot = %d\n", __func__, slot);
+		return -EINVAL;
+	}
+
+	if (data)
+		memcpy_to_sspm(MBOX3_BASE + slot * 4,
+			       data,
+			       len);
+
+	return 0;
+}
+
+static int sspm_ipi_check_ack(uint32_t id)
+{
+	int ret = 0;
+
+	if (id == IPI_ID_PLATFORM) {
+		if ((mmio_read_32(MBOX0_BASE + MBOX_IN_IRQ_OFS) & 0x1) == 0x1)
+			ret = -EINPROGRESS;
+	} else if (id == IPI_ID_SUSPEND) {
+		if ((mmio_read_32(MBOX1_BASE + MBOX_IN_IRQ_OFS) & 0x2) == 0x2)
+			ret = -EINPROGRESS;
+	} else {
+		ERROR("%s: id = %d\n", __func__, id);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+int sspm_ipi_send_non_blocking(uint32_t id, uint32_t *data)
+{
+	int ret = 0;
+
+	ret = sspm_ipi_check_ack(id);
+	if (ret)
+		return ret;
+
+	if (id == IPI_ID_PLATFORM) {
+		memcpy_to_sspm(MBOX0_BASE + PINR_OFFSET_PLATFORM * 4,
+			       data,
+			       PINR_SIZE_PLATFORM);
+		dsb();
+		mmio_write_32(MBOX0_BASE + MBOX_OUT_IRQ_OFS, 0x1);
+	} else if (id == IPI_ID_SUSPEND) {
+		memcpy_to_sspm(MBOX1_BASE + PINR_OFFSET_SUSPEND * 4,
+			       data,
+			       PINR_SIZE_SUSPEND);
+		dsb();
+		mmio_write_32(MBOX1_BASE + MBOX_OUT_IRQ_OFS,
+			      0x2);
+	}
+
+	return 0;
+}
+
+int sspm_ipi_recv_non_blocking(uint32_t id, uint32_t *data, uint32_t len)
+{
+	int ret = 0;
+
+	ret = sspm_ipi_check_ack(id);
+	if (ret == -EINPROGRESS) {
+		if (id == IPI_ID_PLATFORM) {
+			memcpy_from_sspm(data,
+					 MBOX0_BASE + PINR_OFFSET_PLATFORM * 4,
+					 len);
+			dsb();
+			/* clear interrupt bit*/
+			mmio_write_32(MBOX0_BASE + MBOX_IN_IRQ_OFS,
+				      0x1);
+			ret = 0;
+		} else if (id == IPI_ID_SUSPEND) {
+			memcpy_from_sspm(data,
+					 MBOX1_BASE + PINR_OFFSET_SUSPEND * 4,
+					 len);
+			dsb();
+			/* clear interrupt bit*/
+			mmio_write_32(MBOX1_BASE + MBOX_IN_IRQ_OFS,
+				      0x2);
+			ret = 0;
+		}
+	} else if (ret == 0) {
+		ret = -EBUSY;
+	}
+
+	return ret;
+}
+
+int sspm_alive_show(void)
+{
+	uint32_t ipi_data, count;
+	int ret = 0;
+
+	count = 5;
+	ipi_data = 0xdead;
+
+	if (sspm_ipi_send_non_blocking(IPI_ID_PLATFORM, &ipi_data) != 0) {
+		ERROR("sspm init send fail! ret=%d\n", ret);
+		return -1;
+	}
+
+	while (sspm_ipi_recv_non_blocking(IPI_ID_PLATFORM,
+					  &ipi_data,
+					  sizeof(ipi_data))
+					  && count) {
+		mdelay(100);
+		count--;
+	}
+
+	return (ipi_data == 1) ? 0 : -1;
+}
diff --git a/plat/mediatek/mt8183/drivers/sspm/sspm.h b/plat/mediatek/mt8183/drivers/sspm/sspm.h
new file mode 100644
index 0000000..2c2cc10
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/sspm/sspm.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef __SSPM_H__
+#define __SSPM_H__
+/* These should sync with sspm.bin */
+#define IPI_ID_PLATFORM			0
+#define IPI_ID_SUSPEND			6
+#define PINR_OFFSET_PLATFORM		0
+#define PINR_SIZE_PLATFORM		3
+#define PINR_OFFSET_SUSPEND		2
+#define PINR_SIZE_SUSPEND		8
+
+#define MBOX0_BASE			0x10450000
+#define MBOX1_BASE			0x10460000
+#define MBOX3_BASE			0x10480000
+#define MBOX_OUT_IRQ_OFS		0x1000
+#define MBOX_IN_IRQ_OFS			0x1004
+
+#define SHAREMBOX_OFFSET_MCDI		0
+#define SHAREMBOX_SIZE_MCDI		20
+#define SHAREMBOX_OFFSET_SUSPEND	26
+#define SHAREMBOX_SIZE_SUSPEND		6
+
+int sspm_mbox_read(uint32_t slot, uint32_t *data, uint32_t len);
+int sspm_mbox_write(uint32_t slot, uint32_t *data, uint32_t len);
+int sspm_ipi_send_non_blocking(uint32_t id, uint32_t *data);
+int sspm_ipi_recv_non_blocking(uint32_t slot, uint32_t *data, uint32_t len);
+int sspm_alive_show(void);
+#endif /* __SSPM_H__ */
diff --git a/plat/mediatek/mt8183/drivers/uart/uart.c b/plat/mediatek/mt8183/drivers/uart/uart.c
new file mode 100644
index 0000000..3c6a980
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/uart/uart.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <lib/mmio.h>
+#include <uart.h>
+
+static struct mt_uart uart_save_addr[DRV_SUPPORT_UART_PORTS];
+
+static const unsigned int uart_base_addr[DRV_SUPPORT_UART_PORTS] = {
+	UART0_BASE,
+	UART1_BASE
+};
+
+void mt_uart_restore(void)
+{
+	int uart_idx = UART_PORT0;
+	struct mt_uart *uart;
+	unsigned long base;
+
+	/* Must NOT print any debug log before UART restore */
+	for (uart_idx = UART_PORT0; uart_idx < HW_SUPPORT_UART_PORTS;
+	     uart_idx++) {
+
+		uart = &uart_save_addr[uart_idx];
+		base = uart->base;
+
+		mmio_write_32(UART_LCR(base), UART_LCR_MODE_B);
+		mmio_write_32(UART_EFR(base), uart->registers.efr);
+		mmio_write_32(UART_LCR(base), uart->registers.lcr);
+		mmio_write_32(UART_FCR(base), uart->registers.fcr);
+
+		/* baudrate */
+		mmio_write_32(UART_HIGHSPEED(base), uart->registers.highspeed);
+		mmio_write_32(UART_FRACDIV_L(base), uart->registers.fracdiv_l);
+		mmio_write_32(UART_FRACDIV_M(base), uart->registers.fracdiv_m);
+		mmio_write_32(UART_LCR(base),
+			      uart->registers.lcr | UART_LCR_DLAB);
+		mmio_write_32(UART_DLL(base), uart->registers.dll);
+		mmio_write_32(UART_DLH(base), uart->registers.dlh);
+		mmio_write_32(UART_LCR(base), uart->registers.lcr);
+		mmio_write_32(UART_SAMPLE_COUNT(base),
+			      uart->registers.sample_count);
+		mmio_write_32(UART_SAMPLE_POINT(base),
+			      uart->registers.sample_point);
+		mmio_write_32(UART_GUARD(base), uart->registers.guard);
+
+		/* flow control */
+		mmio_write_32(UART_ESCAPE_EN(base), uart->registers.escape_en);
+		mmio_write_32(UART_MCR(base), uart->registers.mcr);
+		mmio_write_32(UART_IER(base), uart->registers.ier);
+		mmio_write_32(UART_SCR(base), uart->registers.scr);
+	}
+}
+
+void mt_uart_save(void)
+{
+	int uart_idx = UART_PORT0;
+	struct mt_uart *uart;
+	unsigned long base;
+
+	for (uart_idx = UART_PORT0; uart_idx < HW_SUPPORT_UART_PORTS;
+	     uart_idx++) {
+
+		uart_save_addr[uart_idx].base = uart_base_addr[uart_idx];
+		base = uart_base_addr[uart_idx];
+		uart = &uart_save_addr[uart_idx];
+		uart->registers.lcr = mmio_read_32(UART_LCR(base));
+
+		mmio_write_32(UART_LCR(base), UART_LCR_MODE_B);
+		uart->registers.efr = mmio_read_32(UART_EFR(base));
+		mmio_write_32(UART_LCR(base), uart->registers.lcr);
+		uart->registers.fcr = mmio_read_32(UART_FCR_RD(base));
+
+		/* baudrate */
+		uart->registers.highspeed = mmio_read_32(UART_HIGHSPEED(base));
+		uart->registers.fracdiv_l = mmio_read_32(UART_FRACDIV_L(base));
+		uart->registers.fracdiv_m = mmio_read_32(UART_FRACDIV_M(base));
+		mmio_write_32(UART_LCR(base),
+			      uart->registers.lcr | UART_LCR_DLAB);
+		uart->registers.dll = mmio_read_32(UART_DLL(base));
+		uart->registers.dlh = mmio_read_32(UART_DLH(base));
+		mmio_write_32(UART_LCR(base), uart->registers.lcr);
+		uart->registers.sample_count = mmio_read_32(
+						UART_SAMPLE_COUNT(base));
+		uart->registers.sample_point = mmio_read_32(
+						UART_SAMPLE_POINT(base));
+		uart->registers.guard = mmio_read_32(UART_GUARD(base));
+
+		/* flow control */
+		uart->registers.escape_en = mmio_read_32(UART_ESCAPE_EN(base));
+		uart->registers.mcr = mmio_read_32(UART_MCR(base));
+		uart->registers.ier = mmio_read_32(UART_IER(base));
+		uart->registers.scr = mmio_read_32(UART_SCR(base));
+	}
+}
+
+void mt_console_uart_cg(int on)
+{
+	if (on)
+		mmio_write_32(UART_CLOCK_GATE_CLR, UART0_CLOCK_GATE_BIT);
+	else
+		mmio_write_32(UART_CLOCK_GATE_SET, UART0_CLOCK_GATE_BIT);
+}
+
+int mt_console_uart_cg_status(void)
+{
+	return mmio_read_32(UART_CLOCK_GATE_STA) & UART0_CLOCK_GATE_BIT;
+}
diff --git a/plat/mediatek/mt8183/drivers/uart/uart.h b/plat/mediatek/mt8183/drivers/uart/uart.h
new file mode 100644
index 0000000..be04c35
--- /dev/null
+++ b/plat/mediatek/mt8183/drivers/uart/uart.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __UART_H__
+#define __UART_H__
+
+#include <platform_def.h>
+
+/* UART HW information */
+#define HW_SUPPORT_UART_PORTS	2
+#define DRV_SUPPORT_UART_PORTS	2
+
+/* console UART clock cg */
+#define UART_CLOCK_GATE_SET		(INFRACFG_AO_BASE + 0x80)
+#define UART_CLOCK_GATE_CLR		(INFRACFG_AO_BASE + 0x84)
+#define UART_CLOCK_GATE_STA		(INFRACFG_AO_BASE + 0x90)
+#define UART0_CLOCK_GATE_BIT		(1U<<22)
+#define UART1_CLOCK_GATE_BIT		(1U<<23)
+
+/* UART registers */
+#define UART_RBR(_baseaddr)			(_baseaddr + 0x0)
+#define UART_THR(_baseaddr)			(_baseaddr + 0x0)
+#define UART_IER(_baseaddr)			(_baseaddr + 0x4)
+#define UART_IIR(_baseaddr)			(_baseaddr + 0x8)
+#define UART_FCR(_baseaddr)			(_baseaddr + 0x8)
+#define UART_LCR(_baseaddr)			(_baseaddr + 0xc)
+#define UART_MCR(_baseaddr)			(_baseaddr + 0x10)
+#define UART_LSR(_baseaddr)			(_baseaddr + 0x14)
+#define UART_MSR(_baseaddr)			(_baseaddr + 0x18)
+#define UART_SCR(_baseaddr)			(_baseaddr + 0x1c)
+#define UART_DLL(_baseaddr)			(_baseaddr + 0x0)
+#define UART_DLH(_baseaddr)			(_baseaddr + 0x4)
+#define UART_EFR(_baseaddr)			(_baseaddr + 0x8)
+#define UART_XON1(_baseaddr)			(_baseaddr + 0x10)
+#define UART_XON2(_baseaddr)			(_baseaddr + 0x14)
+#define UART_XOFF1(_baseaddr)			(_baseaddr + 0x18)
+#define UART_XOFF2(_baseaddr)			(_baseaddr + 0x1c)
+#define UART_AUTOBAUD(_baseaddr)		(_baseaddr + 0x20)
+#define UART_HIGHSPEED(_baseaddr)		(_baseaddr + 0x24)
+#define UART_SAMPLE_COUNT(_baseaddr)		(_baseaddr + 0x28)
+#define UART_SAMPLE_POINT(_baseaddr)		(_baseaddr + 0x2c)
+#define UART_AUTOBAUD_REG(_baseaddr)		(_baseaddr + 0x30)
+#define UART_RATE_FIX_REG(_baseaddr)		(_baseaddr + 0x34)
+#define UART_AUTO_BAUDSAMPLE(_baseaddr)		(_baseaddr + 0x38)
+#define UART_GUARD(_baseaddr)			(_baseaddr + 0x3c)
+#define UART_ESCAPE_DAT(_baseaddr)		(_baseaddr + 0x40)
+#define UART_ESCAPE_EN(_baseaddr)		(_baseaddr + 0x44)
+#define UART_SLEEP_EN(_baseaddr)		(_baseaddr + 0x48)
+#define UART_DMA_EN(_baseaddr)			(_baseaddr + 0x4c)
+#define UART_RXTRI_AD(_baseaddr)		(_baseaddr + 0x50)
+#define UART_FRACDIV_L(_baseaddr)		(_baseaddr + 0x54)
+#define UART_FRACDIV_M(_baseaddr)		(_baseaddr + 0x58)
+#define UART_FCR_RD(_baseaddr)			(_baseaddr + 0x5C)
+#define UART_USB_RX_SEL(_baseaddr)		(_baseaddr + 0xB0)
+#define UART_SLEEP_REQ(_baseaddr)		(_baseaddr + 0xB4)
+#define UART_SLEEP_ACK(_baseaddr)		(_baseaddr + 0xB8)
+#define UART_SPM_SEL(_baseaddr)			(_baseaddr + 0xBC)
+#define UART_LCR_DLAB				0x0080
+#define UART_LCR_MODE_B				0x00bf
+
+enum uart_port_ID {
+	UART_PORT0 = 0,
+	UART_PORT1
+};
+
+struct mt_uart_register {
+	unsigned int dll;
+	unsigned int dlh;
+	unsigned int ier;
+	unsigned int lcr;
+	unsigned int mcr;
+	unsigned int fcr;
+	unsigned int lsr;
+	unsigned int scr;
+	unsigned int efr;
+	unsigned int highspeed;
+	unsigned int sample_count;
+	unsigned int sample_point;
+	unsigned int fracdiv_l;
+	unsigned int fracdiv_m;
+	unsigned int escape_en;
+	unsigned int guard;
+	unsigned int rx_sel;
+};
+
+struct mt_uart {
+	unsigned long base;
+	struct mt_uart_register registers;
+};
+
+/* external API */
+void mt_uart_save(void);
+void mt_uart_restore(void);
+void mt_console_uart_cg(int on);
+int mt_console_uart_cg_status(void);
+
+#endif /* __UART_H__ */
diff --git a/plat/mediatek/mt8183/include/mcucfg.h b/plat/mediatek/mt8183/include/mcucfg.h
index 83ee88f..6b03818 100644
--- a/plat/mediatek/mt8183/include/mcucfg.h
+++ b/plat/mediatek/mt8183/include/mcucfg.h
@@ -28,51 +28,141 @@
 	uint32_t mp0_rw_rsvd0;			/* 0x6C */
 	uint32_t mp0_rw_rsvd1;			/* 0x70 */
 	uint32_t mp0_ro_rsvd;			/* 0x74 */
-	uint32_t reserved0_0[98];		/* 0x78 */
-	uint32_t mp1_ca7l_cache_config;		/* 0x200 */
-	uint32_t mp1_miscdbg;			/* 0x204 */
-	uint32_t reserved0_1[9];		/* 0x208 */
-	uint32_t mp1_axi_config;		/* 0x22C */
-	uint32_t mp1_misc_config[10];		/* 0x230 */
-	uint32_t reserved0_2[3];		/* 0x258 */
-	uint32_t mp1_ca7l_misc_config;		/* 0x264 */
-	uint32_t reserved0_3[310];		/* 0x268 */
+	uint32_t reserved0_0;			/* 0x78 */
+	uint32_t mp0_l2_cache_parity1_rdata;	/* 0x7C */
+	uint32_t mp0_l2_cache_parity2_rdata;	/* 0x80 */
+	uint32_t reserved0_1;			/* 0x84 */
+	uint32_t mp0_rgu_dcm_config;		/* 0x88 */
+	uint32_t mp0_ca53_specific_ctrl;	/* 0x8C */
+	uint32_t mp0_esr_case;			/* 0x90 */
+	uint32_t mp0_esr_mask;			/* 0x94 */
+	uint32_t mp0_esr_trig_en;		/* 0x98 */
+	uint32_t reserved_0_2;			/* 0x9C */
+	uint32_t mp0_ses_cg_en;			/* 0xA0 */
+	uint32_t reserved0_3[216];		/* 0xA4 */
+	uint32_t mp_dbg_ctrl;			/* 0x404 */
+	uint32_t reserved0_4[34];		/* 0x408 */
+	uint32_t mp_dfd_ctrl;			/* 0x490 */
+	uint32_t dfd_cnt_l;			/* 0x494 */
+	uint32_t dfd_cnt_h;			/* 0x498 */
+	uint32_t misccfg_ro_rsvd;		/* 0x49C */
+	uint32_t reserved0_5[24];		/* 0x4A0 */
+	uint32_t mp1_rst_status;		/* 0x500 */
+	uint32_t mp1_dbg_ctrl;			/* 0x504 */
+	uint32_t mp1_dbg_flag;			/* 0x508 */
+	uint32_t mp1_ca7l_ir_mon;		/* 0x50C */
+	uint32_t reserved0_6[32];		/* 0x510 */
+	uint32_t mcusys_dbg_mon_sel_a;		/* 0x590 */
+	uint32_t mcucys_dbg_mon;		/* 0x594 */
+	uint32_t misccfg_sec_voi_status0;	/* 0x598 */
+	uint32_t misccfg_sec_vio_status1;	/* 0x59C */
+	uint32_t reserved0_7[18];		/* 0x5A0 */
+	uint32_t gic500_int_mask;		/* 0x5E8 */
+	uint32_t core_rst_en_latch;		/* 0x5EC */
+	uint32_t reserved0_8[3];		/* 0x5F0 */
+	uint32_t dbg_core_ret;			/* 0x5FC */
+	uint32_t mcusys_config_a;		/* 0x600 */
+	uint32_t mcusys_config1_a;		/* 0x604 */
+	uint32_t mcusys_gic_prebase_a;		/* 0x608 */
+	uint32_t mcusys_pinmux;			/* 0x60C */
+	uint32_t sec_range0_start;		/* 0x610 */
+	uint32_t sec_range0_end;		/* 0x614 */
+	uint32_t sec_range_enable;		/* 0x618 */
+	uint32_t l2c_mm_base;			/* 0x61C */
+	uint32_t reserved0_9[8];		/* 0x620 */
+	uint32_t aclken_div;			/* 0x640 */
+	uint32_t pclken_div;			/* 0x644 */
+	uint32_t l2c_sram_ctrl;			/* 0x648 */
+	uint32_t armpll_jit_ctrl;		/* 0x64C */
+	uint32_t cci_addrmap;			/* 0x650 */
+	uint32_t cci_config;			/* 0x654 */
+	uint32_t cci_periphbase;		/* 0x658 */
+	uint32_t cci_nevntcntovfl;		/* 0x65C */
+	uint32_t cci_clk_ctrl;			/* 0x660 */
+	uint32_t cci_acel_s1_ctrl;		/* 0x664 */
+	uint32_t mcusys_bus_fabric_dcm_ctrl;	/* 0x668 */
+	uint32_t mcu_misc_dcm_ctrl;		/* 0x66C */
+	uint32_t xgpt_ctl;			/* 0x670 */
+	uint32_t xgpt_idx;			/* 0x674 */
+	uint32_t reserved0_10[3];		/* 0x678 */
+	uint32_t mcusys_rw_rsvd0;		/* 0x684 */
+	uint32_t mcusys_rw_rsvd1;		/* 0x688 */
+	uint32_t reserved0_11[13];		/* 0x68C */
+	uint32_t gic_500_delsel_ctl;		/* 0x6C0 */
+	uint32_t etb_delsel_ctl;		/* 0x6C4 */
+	uint32_t etb_rst_ctl;			/* 0x6C8 */
+	uint32_t reserved0_12[29];		/* 0x6CC */
 	uint32_t cci_adb400_dcm_config;		/* 0x740 */
 	uint32_t sync_dcm_config;		/* 0x744 */
-	uint32_t reserved0_4[16];		/* 0x748 */
-	uint32_t mp0_cputop_spmc_ctl;		/* 0x788 */
-	uint32_t mp1_cputop_spmc_ctl;		/* 0x78C */
-	uint32_t mp1_cputop_spmc_sram_ctl;	/* 0x790 */
-	uint32_t reserved0_5[23];		/* 0x794 */
+	uint32_t reserved0_13;			/* 0x748 */
+	uint32_t sync_dcm_cluster_config;	/* 0x74C */
+	uint32_t sw_udi;			/* 0x750 */
+	uint32_t reserved0_14;			/* 0x754 */
+	uint32_t gic_sync_dcm;			/* 0x758 */
+	uint32_t big_dbg_pwr_ctrl;		/* 0x75C */
+	uint32_t gic_cpu_periphbase;		/* 0x760 */
+	uint32_t axi_cpu_config;		/* 0x764 */
+	uint32_t reserved0_15[2];		/* 0x768 */
+	uint32_t mcsib_sys_ctrl1;		/* 0x770 */
+	uint32_t mcsib_sys_ctrl2;		/* 0x774 */
+	uint32_t mcsib_sys_ctrl3;		/* 0x778 */
+	uint32_t mcsib_sys_ctrl4;		/* 0x77C */
+	uint32_t mcsib_dbg_ctrl1;		/* 0x780 */
+	uint32_t pwrmcu_apb2to1;		/* 0x784 */
+	uint32_t mp0_spmc;			/* 0x788 */
+	uint32_t reserved0_16;			/* 0x78C */
+	uint32_t mp0_spmc_sram_ctl;		/* 0x790 */
+	uint32_t reserved0_17;			/* 0x794 */
+	uint32_t mp0_sw_rst_wait_cycle;		/* 0x798 */
+	uint32_t reserved0_18;			/* 0x79C */
+	uint32_t mp0_pll_divider_cfg;		/* 0x7A0 */
+	uint32_t reserved0_19;			/* 0x7A4 */
+	uint32_t mp2_pll_divider_cfg;		/* 0x7A8 */
+	uint32_t reserved0_20[5];		/* 0x7AC */
+	uint32_t bus_pll_divider_cfg;		/* 0x7C0 */
+	uint32_t reserved0_21[7];		/* 0x7C4 */
+	uint32_t clusterid_aff1;		/* 0x7E0 */
+	uint32_t clusterid_aff2;		/* 0x7E4 */
+	uint32_t reserved0_22[2];		/* 0x7E8 */
 	uint32_t l2_cfg_mp0;			/* 0x7F0 */
 	uint32_t l2_cfg_mp1;			/* 0x7F4 */
-	uint32_t reserved0_6[1282];		/* 0x7F8 */
+	uint32_t reserved0_23[218];		/* 0x7F8 */
+	uint32_t mscib_dcm_en;			/* 0xB60 */
+	uint32_t reserved0_24[1063];		/* 0xB64 */
 	uint32_t cpusys0_sparkvretcntrl;	/* 0x1C00 */
 	uint32_t cpusys0_sparken;		/* 0x1C04 */
 	uint32_t cpusys0_amuxsel;		/* 0x1C08 */
-	uint32_t reserved0_7[9];		/* 0x1C0C */
+	uint32_t reserved0_25[9];		/* 0x1C0C */
 	uint32_t cpusys0_cpu0_spmc_ctl;		/* 0x1C30 */
 	uint32_t cpusys0_cpu1_spmc_ctl;		/* 0x1C34 */
 	uint32_t cpusys0_cpu2_spmc_ctl;		/* 0x1C38 */
 	uint32_t cpusys0_cpu3_spmc_ctl;		/* 0x1C3C */
-	uint32_t reserved0_8[370];		/* 0x1C40 */
+	uint32_t reserved0_26[8];		/* 0x1C40 */
+	uint32_t mp0_sync_dcm_cgavg_ctrl;	/* 0x1C60 */
+	uint32_t mp0_sync_dcm_cgavg_fact;	/* 0x1C64 */
+	uint32_t mp0_sync_dcm_cgavg_rfact;	/* 0x1C68 */
+	uint32_t mp0_sync_dcm_cgavg;		/* 0x1C6C */
+	uint32_t mp0_l2_parity_clr;		/* 0x1C70 */
+	uint32_t reserved0_27[357];		/* 0x1C74 */
 	uint32_t mp2_cpucfg;			/* 0x2208 */
 	uint32_t mp2_axi_config;		/* 0x220C */
-	uint32_t reserved0_9[36];		/* 0x2210 */
-	uint32_t mp2_cputop_spm_ctl;		/* 0x22A0 */
-	uint32_t mp2_cputop_spm_sta;		/* 0x22A4 */
-	uint32_t reserved0_10[98];		/* 0x22A8 */
-	uint32_t cpusys2_cpu0_spmc_ctl;		/* 0x2430 */
-	uint32_t cpusys2_cpu0_spmc_sta;		/* 0x2434 */
-	uint32_t cpusys2_cpu1_spmc_ctl;		/* 0x2438 */
-	uint32_t cpusys2_cpu1_spmc_sta;		/* 0x243C */
-	uint32_t reserved0_11[176];		/* 0x2440 */
+	uint32_t reserved0_28[25];		/* 0x2210 */
+	uint32_t mp2_sync_dcm;			/* 0x2274 */
+	uint32_t reserved0_29[10];		/* 0x2278 */
+	uint32_t ptp3_cputop_spmc0;		/* 0x22A0 */
+	uint32_t ptp3_cputop_spmc1;		/* 0x22A4 */
+	uint32_t reserved0_30[98];		/* 0x22A8 */
+	uint32_t ptp3_cpu0_spmc0;		/* 0x2430 */
+	uint32_t ptp3_cpu0_spmc1;		/* 0x2434 */
+	uint32_t ptp3_cpu1_spmc0;		/* 0x2438 */
+	uint32_t ptp3_cpu1_spmc1;		/* 0x243C */
+	uint32_t ptp3_cpu2_spmc0;		/* 0x2440 */
+	uint32_t ptp3_cpu2_spmc1;		/* 0x2444 */
+	uint32_t ptp3_cpu3_spmc0;		/* 0x2448 */
+	uint32_t ptp3_cpu3_spmc1;		/* 0x244C */
+	uint32_t ptp3_cpux_spmc;		/* 0x2450 */
+	uint32_t reserved0_31[171];		/* 0x2454 */
 	uint32_t spark2ld0;			/* 0x2700 */
-	uint32_t reserved0_12[1355];		/* 0x2704 */
-	uint32_t cpusys1_cpu0_spmc_ctl;		/* 0x3C30 */
-	uint32_t cpusys1_cpu1_spmc_ctl;		/* 0x3C34 */
-	uint32_t cpusys1_cpu2_spmc_ctl;		/* 0x3C38 */
-	uint32_t cpusys1_cpu3_spmc_ctl;		/* 0x3C3C */
 };
 
 static struct mt8183_mcucfg_regs *const mt8183_mcucfg = (void *)MCUCFG_BASE;
@@ -244,4 +334,235 @@
 	MP1_L2RSTDISABLE = 1 << MP1_L2RSTDISABLE_SHIFT
 };
 
+/* bus pll divider dcm related */
+enum {
+	BUS_PLLDIVIDER_DCM_DBC_CNT_0_SHIFT = 11,
+	BUS_PLLDIV_ARMWFI_DCM_EN_SHIFT = 24,
+	BUS_PLLDIV_ARMWFE_DCM_EN_SHIFT = 25,
+
+	BUS_PLLDIV_DCM = (1 << BUS_PLLDIVIDER_DCM_DBC_CNT_0_SHIFT) |
+			 (1 << BUS_PLLDIV_ARMWFI_DCM_EN_SHIFT) |
+			 (1 << BUS_PLLDIV_ARMWFE_DCM_EN_SHIFT)
+};
+
+/* mp0 pll divider dcm related */
+enum {
+	MP0_PLLDIV_DCM_DBC_CNT_0_SHIFT = 11,
+	MP0_PLLDIV_ARMWFI_DCM_EN_SHIFT = 24,
+	MP0_PLLDIV_ARMWFE_DCM_EN_SHIFT = 25,
+	MP0_PLLDIV_LASTCORE_IDLE_EN_SHIFT = 31,
+	MP0_PLLDIV_DCM = (1 << MP0_PLLDIV_DCM_DBC_CNT_0_SHIFT) |
+			 (1 << MP0_PLLDIV_ARMWFI_DCM_EN_SHIFT) |
+			 (1 << MP0_PLLDIV_ARMWFE_DCM_EN_SHIFT) |
+			 (1u << MP0_PLLDIV_LASTCORE_IDLE_EN_SHIFT)
+};
+
+/* mp2 pll divider dcm related */
+enum {
+	MP2_PLLDIV_DCM_DBC_CNT_0_SHIFT = 11,
+	MP2_PLLDIV_ARMWFI_DCM_EN_SHIFT = 24,
+	MP2_PLLDIV_ARMWFE_DCM_EN_SHIFT = 25,
+	MP2_PLLDIV_LASTCORE_IDLE_EN_SHIFT = 31,
+	MP2_PLLDIV_DCM = (1 << MP2_PLLDIV_DCM_DBC_CNT_0_SHIFT) |
+			 (1 << MP2_PLLDIV_ARMWFI_DCM_EN_SHIFT) |
+			 (1 << MP2_PLLDIV_ARMWFE_DCM_EN_SHIFT) |
+			 (1u << MP2_PLLDIV_LASTCORE_IDLE_EN_SHIFT)
+};
+
+/* mcsib dcm related */
+enum {
+	MCSIB_CACTIVE_SEL_SHIFT = 0,
+	MCSIB_DCM_EN_SHIFT = 16,
+
+	MCSIB_CACTIVE_SEL_MASK = 0xffff << MCSIB_CACTIVE_SEL_SHIFT,
+	MCSIB_CACTIVE_SEL = 0xffff << MCSIB_CACTIVE_SEL_SHIFT,
+
+	MCSIB_DCM_MASK = 0xffffu << MCSIB_DCM_EN_SHIFT,
+	MCSIB_DCM = 0xffffu << MCSIB_DCM_EN_SHIFT,
+};
+
+/* cci adb400 dcm related */
+enum {
+	CCI_M0_ADB400_DCM_EN_SHIFT = 0,
+	CCI_M1_ADB400_DCM_EN_SHIFT = 1,
+	CCI_M2_ADB400_DCM_EN_SHIFT = 2,
+	CCI_S2_ADB400_DCM_EN_SHIFT = 3,
+	CCI_S3_ADB400_DCM_EN_SHIFT = 4,
+	CCI_S4_ADB400_DCM_EN_SHIFT = 5,
+	CCI_S5_ADB400_DCM_EN_SHIFT = 6,
+	ACP_S3_ADB400_DCM_EN_SHIFT = 11,
+
+	CCI_ADB400_DCM_MASK = (1 << CCI_M0_ADB400_DCM_EN_SHIFT) |
+			      (1 << CCI_M1_ADB400_DCM_EN_SHIFT) |
+			      (1 << CCI_M2_ADB400_DCM_EN_SHIFT) |
+			      (1 << CCI_S2_ADB400_DCM_EN_SHIFT) |
+			      (1 << CCI_S4_ADB400_DCM_EN_SHIFT) |
+			      (1 << CCI_S4_ADB400_DCM_EN_SHIFT) |
+			      (1 << CCI_S5_ADB400_DCM_EN_SHIFT) |
+			      (1 << ACP_S3_ADB400_DCM_EN_SHIFT),
+	CCI_ADB400_DCM = (1 << CCI_M0_ADB400_DCM_EN_SHIFT) |
+			 (1 << CCI_M1_ADB400_DCM_EN_SHIFT) |
+			 (1 << CCI_M2_ADB400_DCM_EN_SHIFT) |
+			 (0 << CCI_S2_ADB400_DCM_EN_SHIFT) |
+			 (0 << CCI_S4_ADB400_DCM_EN_SHIFT) |
+			 (0 << CCI_S4_ADB400_DCM_EN_SHIFT) |
+			 (0 << CCI_S5_ADB400_DCM_EN_SHIFT) |
+			 (1 << ACP_S3_ADB400_DCM_EN_SHIFT)
+};
+
+/* sync dcm related */
+enum {
+	CCI_SYNC_DCM_DIV_EN_SHIFT = 0,
+	CCI_SYNC_DCM_UPDATE_TOG_SHIFT = 1,
+	CCI_SYNC_DCM_DIV_SEL_SHIFT = 2,
+	MP0_SYNC_DCM_DIV_EN_SHIFT = 10,
+	MP0_SYNC_DCM_UPDATE_TOG_SHIFT = 11,
+	MP0_SYNC_DCM_DIV_SEL_SHIFT = 12,
+
+	SYNC_DCM_MASK = (1 << CCI_SYNC_DCM_DIV_EN_SHIFT) |
+			(1 << CCI_SYNC_DCM_UPDATE_TOG_SHIFT) |
+			(0x7f << CCI_SYNC_DCM_DIV_SEL_SHIFT) |
+			(1 << MP0_SYNC_DCM_DIV_EN_SHIFT) |
+			(1 << MP0_SYNC_DCM_UPDATE_TOG_SHIFT) |
+			(0x7f << MP0_SYNC_DCM_DIV_SEL_SHIFT),
+	SYNC_DCM = (1 << CCI_SYNC_DCM_DIV_EN_SHIFT) |
+		   (1 << CCI_SYNC_DCM_UPDATE_TOG_SHIFT) |
+		   (0 << CCI_SYNC_DCM_DIV_SEL_SHIFT) |
+		   (1 << MP0_SYNC_DCM_DIV_EN_SHIFT) |
+		   (1 << MP0_SYNC_DCM_UPDATE_TOG_SHIFT) |
+		   (0 << MP0_SYNC_DCM_DIV_SEL_SHIFT)
+};
+
+/* mcu bus dcm related */
+enum {
+	MCU_BUS_DCM_EN_SHIFT = 8,
+	MCU_BUS_DCM = 1 << MCU_BUS_DCM_EN_SHIFT
+};
+
+/* mcusys bus fabric dcm related */
+enum {
+	ACLK_INFRA_DYNAMIC_CG_EN_SHIFT = 0,
+	EMI2_ADB400_S_DCM_CTRL_SHIFT = 1,
+	ACLK_GPU_DYNAMIC_CG_EN_SHIFT = 2,
+	ACLK_PSYS_DYNAMIC_CG_EN_SHIFT = 3,
+	MP0_ADB400_S_DCM_CTRL_SHIFT = 4,
+	MP0_ADB400_M_DCM_CTRL_SHIFT = 5,
+	MP1_ADB400_S_DCM_CTRL_SHIFT = 6,
+	MP1_ADB400_M_DCM_CTRL_SHIFT = 7,
+	EMICLK_EMI_DYNAMIC_CG_EN_SHIFT = 8,
+	INFRACLK_INFRA_DYNAMIC_CG_EN_SHIFT = 9,
+	EMICLK_GPU_DYNAMIC_CG_EN_SHIFT = 10,
+	INFRACLK_PSYS_DYNAMIC_CG_EN_SHIFT = 11,
+	EMICLK_EMI1_DYNAMIC_CG_EN_SHIFT = 12,
+	EMI1_ADB400_S_DCM_CTRL_SHIFT = 16,
+	MP2_ADB400_M_DCM_CTRL_SHIFT = 17,
+	MP0_ICC_AXI_STREAM_ARCH_CG_SHIFT = 18,
+	MP1_ICC_AXI_STREAM_ARCH_CG_SHIFT = 19,
+	MP2_ICC_AXI_STREAM_ARCH_CG_SHIFT = 20,
+	L2_SHARE_ADB400_DCM_CTRL_SHIFT = 21,
+	MP1_AGGRESS_DCM_CTRL_SHIFT = 22,
+	MP0_AGGRESS_DCM_CTRL_SHIFT = 23,
+	MP0_ADB400_ACP_S_DCM_CTRL_SHIFT = 24,
+	MP0_ADB400_ACP_M_DCM_CTRL_SHIFT = 25,
+	MP1_ADB400_ACP_S_DCM_CTRL_SHIFT = 26,
+	MP1_ADB400_ACP_M_DCM_CTRL_SHIFT = 27,
+	MP3_ADB400_M_DCM_CTRL_SHIFT = 28,
+	MP3_ICC_AXI_STREAM_ARCH_CG_SHIFT = 29,
+
+	MCUSYS_BUS_FABRIC_DCM_MASK = (1 << ACLK_INFRA_DYNAMIC_CG_EN_SHIFT) |
+				     (1 << EMI2_ADB400_S_DCM_CTRL_SHIFT) |
+				     (1 << ACLK_GPU_DYNAMIC_CG_EN_SHIFT) |
+				     (1 << ACLK_PSYS_DYNAMIC_CG_EN_SHIFT) |
+				     (1 << MP0_ADB400_S_DCM_CTRL_SHIFT) |
+				     (1 << MP0_ADB400_M_DCM_CTRL_SHIFT) |
+				     (1 << MP1_ADB400_S_DCM_CTRL_SHIFT) |
+				     (1 << MP1_ADB400_M_DCM_CTRL_SHIFT) |
+				     (1 << EMICLK_EMI_DYNAMIC_CG_EN_SHIFT) |
+				     (1 << INFRACLK_INFRA_DYNAMIC_CG_EN_SHIFT) |
+				     (1 << EMICLK_GPU_DYNAMIC_CG_EN_SHIFT) |
+				     (1 << INFRACLK_PSYS_DYNAMIC_CG_EN_SHIFT) |
+				     (1 << EMICLK_EMI1_DYNAMIC_CG_EN_SHIFT) |
+				     (1 << EMI1_ADB400_S_DCM_CTRL_SHIFT) |
+				     (1 << MP2_ADB400_M_DCM_CTRL_SHIFT) |
+				     (1 << MP0_ICC_AXI_STREAM_ARCH_CG_SHIFT) |
+				     (1 << MP1_ICC_AXI_STREAM_ARCH_CG_SHIFT) |
+				     (1 << MP2_ICC_AXI_STREAM_ARCH_CG_SHIFT) |
+				     (1 << L2_SHARE_ADB400_DCM_CTRL_SHIFT) |
+				     (1 << MP1_AGGRESS_DCM_CTRL_SHIFT) |
+				     (1 << MP0_AGGRESS_DCM_CTRL_SHIFT) |
+				     (1 << MP0_ADB400_ACP_S_DCM_CTRL_SHIFT) |
+				     (1 << MP0_ADB400_ACP_M_DCM_CTRL_SHIFT) |
+				     (1 << MP1_ADB400_ACP_S_DCM_CTRL_SHIFT) |
+				     (1 << MP1_ADB400_ACP_M_DCM_CTRL_SHIFT) |
+				     (1 << MP3_ADB400_M_DCM_CTRL_SHIFT) |
+				     (1 << MP3_ICC_AXI_STREAM_ARCH_CG_SHIFT),
+
+	MCUSYS_BUS_FABRIC_DCM = (1 << ACLK_INFRA_DYNAMIC_CG_EN_SHIFT) |
+				(1 << EMI2_ADB400_S_DCM_CTRL_SHIFT) |
+				(1 << ACLK_GPU_DYNAMIC_CG_EN_SHIFT) |
+				(1 << ACLK_PSYS_DYNAMIC_CG_EN_SHIFT) |
+				(0 << MP0_ADB400_S_DCM_CTRL_SHIFT) |
+				(0 << MP0_ADB400_M_DCM_CTRL_SHIFT) |
+				(1 << MP1_ADB400_S_DCM_CTRL_SHIFT) |
+				(1 << MP1_ADB400_M_DCM_CTRL_SHIFT) |
+				(1 << EMICLK_EMI_DYNAMIC_CG_EN_SHIFT) |
+				(1 << INFRACLK_INFRA_DYNAMIC_CG_EN_SHIFT) |
+				(1 << EMICLK_GPU_DYNAMIC_CG_EN_SHIFT) |
+				(1 << INFRACLK_PSYS_DYNAMIC_CG_EN_SHIFT) |
+				(1 << EMICLK_EMI1_DYNAMIC_CG_EN_SHIFT) |
+				(1 << EMI1_ADB400_S_DCM_CTRL_SHIFT) |
+				(0 << MP2_ADB400_M_DCM_CTRL_SHIFT) |
+				(1 << MP0_ICC_AXI_STREAM_ARCH_CG_SHIFT) |
+				(1 << MP1_ICC_AXI_STREAM_ARCH_CG_SHIFT) |
+				(1 << MP2_ICC_AXI_STREAM_ARCH_CG_SHIFT) |
+				(1 << L2_SHARE_ADB400_DCM_CTRL_SHIFT) |
+				(1 << MP1_AGGRESS_DCM_CTRL_SHIFT) |
+				(1 << MP0_AGGRESS_DCM_CTRL_SHIFT) |
+				(1 << MP0_ADB400_ACP_S_DCM_CTRL_SHIFT) |
+				(1 << MP0_ADB400_ACP_M_DCM_CTRL_SHIFT) |
+				(1 << MP1_ADB400_ACP_S_DCM_CTRL_SHIFT) |
+				(1 << MP1_ADB400_ACP_M_DCM_CTRL_SHIFT) |
+				(1 << MP3_ADB400_M_DCM_CTRL_SHIFT) |
+				(1 << MP3_ICC_AXI_STREAM_ARCH_CG_SHIFT)
+};
+
+/* l2c_sram dcm related */
+enum {
+	L2C_SRAM_DCM_EN_SHIFT = 0,
+	L2C_SRAM_DCM = 1 << L2C_SRAM_DCM_EN_SHIFT
+};
+
+/* mcu misc dcm related */
+enum {
+	MP0_CNTVALUEB_DCM_EN_SHIFT = 0,
+	MP_CNTVALUEB_DCM_EN = 8,
+
+	CNTVALUEB_DCM = (1 << MP0_CNTVALUEB_DCM_EN_SHIFT) |
+			(1 << MP_CNTVALUEB_DCM_EN)
+};
+
+/* sync dcm cluster config related */
+enum {
+	MP0_SYNC_DCM_STALL_WR_EN_SHIFT = 7,
+	MCUSYS_MAX_ACCESS_LATENCY_SHIFT = 24,
+
+	MCU0_SYNC_DCM_STALL_WR_EN = 1 << MP0_SYNC_DCM_STALL_WR_EN_SHIFT,
+
+	MCUSYS_MAX_ACCESS_LATENCY_MASK = 0xf << MCUSYS_MAX_ACCESS_LATENCY_SHIFT,
+	MCUSYS_MAX_ACCESS_LATENCY = 0x5 << MCUSYS_MAX_ACCESS_LATENCY_SHIFT
+};
+
+/* cpusys rgu dcm related */
+enum {
+	CPUSYS_RGU_DCM_CONFIG_SHIFT = 0,
+
+	CPUSYS_RGU_DCM_CINFIG = 1 << CPUSYS_RGU_DCM_CONFIG_SHIFT
+};
+
+/* mp2 sync dcm related */
+enum {
+	MP2_DCM_EN_SHIFT = 0,
+
+	MP2_DCM_EN = 1 << MP2_DCM_EN_SHIFT
+};
 #endif  /* MT8183_MCUCFG_H */
diff --git a/plat/mediatek/mt8183/include/plat_debug.h b/plat/mediatek/mt8183/include/plat_debug.h
index e51a6ea..c9d73cc 100644
--- a/plat/mediatek/mt8183/include/plat_debug.h
+++ b/plat/mediatek/mt8183/include/plat_debug.h
@@ -24,8 +24,6 @@
 #define BIT_CA15M_L2PARITY_EN		(1 << 1)
 #define BIT_CA15M_LASTPC_DIS		(1 << 8)
 
-#define MP1_CPUTOP_PWR_CON		0x10006218
-
 #define MCU_ALL_PWR_ON_CTRL		0x0c530b58
 #define PLAT_MTK_CIRCULAR_BUFFER_UNLOCK	0xefab4133
 #define PLAT_MTK_CIRCULAR_BUFFER_LOCK	0xefab4134
diff --git a/plat/mediatek/mt8183/include/platform_def.h b/plat/mediatek/mt8183/include/platform_def.h
index f802ac2..766e766 100644
--- a/plat/mediatek/mt8183/include/platform_def.h
+++ b/plat/mediatek/mt8183/include/platform_def.h
@@ -41,6 +41,7 @@
 #define APMIXEDSYS         (IO_PHYS + 0xC000)
 #define ARMPLL_LL_CON0     (APMIXEDSYS + 0x200)
 #define ARMPLL_L_CON0      (APMIXEDSYS + 0x210)
+#define ARMPLL_L_PWR_CON0  (APMIXEDSYS + 0x21c)
 #define MAINPLL_CON0       (APMIXEDSYS + 0x220)
 #define CCIPLL_CON0        (APMIXEDSYS + 0x290)
 
@@ -74,6 +75,7 @@
 #define MT_L2_WRITE_ACCESS_RATE  (MCUCFG_BASE + 0x604)
 #define MP0_CA7L_CACHE_CONFIG    (MCUCFG_BASE + 0x7f0)
 #define MP1_CA7L_CACHE_CONFIG    (MCUCFG_BASE + 0x7f4)
+#define EMI_WFIFO                (MCUCFG_BASE + 0x0b5c)
 
 /*******************************************************************************
  * GIC related constants
@@ -87,6 +89,7 @@
  * UART related constants
  ******************************************************************************/
 #define UART0_BASE    (IO_PHYS + 0x01002000)
+#define UART1_BASE    (IO_PHYS + 0x01003000)
 
 #define UART_BAUDRATE 115200
 #define UART_CLOCK    26000000
diff --git a/plat/mediatek/mt8183/include/spm.h b/plat/mediatek/mt8183/include/spm.h
deleted file mode 100644
index 208d760..0000000
--- a/plat/mediatek/mt8183/include/spm.h
+++ /dev/null
@@ -1,1715 +0,0 @@
-/*
- * Copyright (c) 2019, MediaTek Inc. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef SPM_H
-#define SPM_H
-
-#define POWERON_CONFIG_EN		(SPM_BASE + 0x000)
-#define SPM_POWER_ON_VAL0		(SPM_BASE + 0x004)
-#define SPM_POWER_ON_VAL1		(SPM_BASE + 0x008)
-#define SPM_CLK_CON			(SPM_BASE + 0x00C)
-#define SPM_CLK_SETTLE			(SPM_BASE + 0x010)
-#define SPM_AP_STANDBY_CON		(SPM_BASE + 0x014)
-#define PCM_CON0			(SPM_BASE + 0x018)
-#define PCM_CON1			(SPM_BASE + 0x01C)
-#define PCM_IM_PTR			(SPM_BASE + 0x020)
-#define PCM_IM_LEN			(SPM_BASE + 0x024)
-#define PCM_REG_DATA_INI		(SPM_BASE + 0x028)
-#define PCM_PWR_IO_EN			(SPM_BASE + 0x02C)
-#define PCM_TIMER_VAL			(SPM_BASE + 0x030)
-#define PCM_WDT_VAL			(SPM_BASE + 0x034)
-#define PCM_IM_HOST_RW_PTR		(SPM_BASE + 0x038)
-#define PCM_IM_HOST_RW_DAT		(SPM_BASE + 0x03C)
-#define PCM_EVENT_VECTOR0		(SPM_BASE + 0x040)
-#define PCM_EVENT_VECTOR1		(SPM_BASE + 0x044)
-#define PCM_EVENT_VECTOR2		(SPM_BASE + 0x048)
-#define PCM_EVENT_VECTOR3		(SPM_BASE + 0x04C)
-#define PCM_EVENT_VECTOR4		(SPM_BASE + 0x050)
-#define PCM_EVENT_VECTOR5		(SPM_BASE + 0x054)
-#define PCM_EVENT_VECTOR6		(SPM_BASE + 0x058)
-#define PCM_EVENT_VECTOR7		(SPM_BASE + 0x05C)
-#define PCM_EVENT_VECTOR8		(SPM_BASE + 0x060)
-#define PCM_EVENT_VECTOR9		(SPM_BASE + 0x064)
-#define PCM_EVENT_VECTOR10		(SPM_BASE + 0x068)
-#define PCM_EVENT_VECTOR11		(SPM_BASE + 0x06C)
-#define PCM_EVENT_VECTOR12		(SPM_BASE + 0x070)
-#define PCM_EVENT_VECTOR13		(SPM_BASE + 0x074)
-#define PCM_EVENT_VECTOR14		(SPM_BASE + 0x078)
-#define PCM_EVENT_VECTOR15		(SPM_BASE + 0x07C)
-#define PCM_EVENT_VECTOR_EN		(SPM_BASE + 0x080)
-#define SPM_SWINT			(SPM_BASE + 0x08C)
-#define SPM_SWINT_SET			(SPM_BASE + 0x090)
-#define SPM_SWINT_CLR			(SPM_BASE + 0x094)
-#define SPM_SCP_MAILBOX			(SPM_BASE + 0x098)
-#define SPM_SCP_IRQ			(SPM_BASE + 0x09C)
-#define SPM_TWAM_CON			(SPM_BASE + 0x0A0)
-#define SPM_TWAM_WINDOW_LEN		(SPM_BASE + 0x0A4)
-#define SPM_TWAM_IDLE_SEL		(SPM_BASE + 0x0A8)
-#define SPM_CPU_WAKEUP_EVENT		(SPM_BASE + 0x0B0)
-#define SPM_IRQ_MASK			(SPM_BASE + 0x0B4)
-#define SPM_SRC_REQ			(SPM_BASE + 0x0B8)
-#define SPM_SRC_MASK			(SPM_BASE + 0x0BC)
-#define SPM_SRC2_MASK			(SPM_BASE + 0x0C0)
-#define SPM_WAKEUP_EVENT_MASK		(SPM_BASE + 0x0C4)
-#define SPM_WAKEUP_EVENT_EXT_MASK	(SPM_BASE + 0x0C8)
-#define SCP_CLK_CON			(SPM_BASE + 0x0D0)
-#define PCM_DEBUG_CON			(SPM_BASE + 0x0D4)
-#define PCM_REG0_DATA			(SPM_BASE + 0x100)
-#define PCM_REG1_DATA			(SPM_BASE + 0x104)
-#define PCM_REG2_DATA			(SPM_BASE + 0x108)
-#define PCM_REG3_DATA			(SPM_BASE + 0x10C)
-#define PCM_REG4_DATA			(SPM_BASE + 0x110)
-#define PCM_REG5_DATA			(SPM_BASE + 0x114)
-#define PCM_REG6_DATA			(SPM_BASE + 0x118)
-#define PCM_REG7_DATA			(SPM_BASE + 0x11C)
-#define PCM_REG8_DATA			(SPM_BASE + 0x120)
-#define PCM_REG9_DATA			(SPM_BASE + 0x124)
-#define PCM_REG10_DATA			(SPM_BASE + 0x128)
-#define PCM_REG11_DATA			(SPM_BASE + 0x12C)
-#define PCM_REG12_DATA			(SPM_BASE + 0x130)
-#define PCM_REG13_DATA			(SPM_BASE + 0x134)
-#define PCM_REG14_DATA			(SPM_BASE + 0x138)
-#define PCM_REG15_DATA			(SPM_BASE + 0x13C)
-#define PCM_REG12_MASK_B_STA		(SPM_BASE + 0x140)
-#define PCM_REG12_EXT_DATA		(SPM_BASE + 0x144)
-#define PCM_REG12_EXT_MASK_B_STA	(SPM_BASE + 0x148)
-#define PCM_EVENT_REG_STA		(SPM_BASE + 0x14C)
-#define PCM_TIMER_OUT			(SPM_BASE + 0x150)
-#define PCM_WDT_OUT			(SPM_BASE + 0x154)
-#define SPM_IRQ_STA			(SPM_BASE + 0x158)
-#define SPM_WAKEUP_STA			(SPM_BASE + 0x15C)
-#define SPM_WAKEUP_EXT_STA		(SPM_BASE + 0x160)
-#define SPM_WAKEUP_MISC			(SPM_BASE + 0x164)
-#define BUS_PROTECT_RDY			(SPM_BASE + 0x168)
-#define BUS_PROTECT2_RDY		(SPM_BASE + 0x16C)
-#define SUBSYS_IDLE_STA			(SPM_BASE + 0x170)
-#define CPU_IDLE_STA			(SPM_BASE + 0x174)
-#define PCM_FSM_STA			(SPM_BASE + 0x178)
-#define PWR_STATUS			(SPM_BASE + 0x180)
-#define PWR_STATUS_2ND			(SPM_BASE + 0x184)
-#define CPU_PWR_STATUS			(SPM_BASE + 0x188)
-#define CPU_PWR_STATUS_2ND		(SPM_BASE + 0x18C)
-#define PCM_WDT_LATCH_0			(SPM_BASE + 0x190)
-#define PCM_WDT_LATCH_1			(SPM_BASE + 0x194)
-#define PCM_WDT_LATCH_2			(SPM_BASE + 0x198)
-#define DRAMC_DBG_LATCH			(SPM_BASE + 0x19C)
-#define SPM_TWAM_LAST_STA0		(SPM_BASE + 0x1A0)
-#define SPM_TWAM_LAST_STA1		(SPM_BASE + 0x1A4)
-#define SPM_TWAM_LAST_STA2		(SPM_BASE + 0x1A8)
-#define SPM_TWAM_LAST_STA3		(SPM_BASE + 0x1AC)
-#define SPM_TWAM_CURR_STA0		(SPM_BASE + 0x1B0)
-#define SPM_TWAM_CURR_STA1		(SPM_BASE + 0x1B4)
-#define SPM_TWAM_CURR_STA2		(SPM_BASE + 0x1B8)
-#define SPM_TWAM_CURR_STA3		(SPM_BASE + 0x1BC)
-#define SPM_TWAM_TIMER_OUT		(SPM_BASE + 0x1C0)
-#define PCM_WDT_LATCH_3			(SPM_BASE + 0x1C4)
-#define SPM_SRC_RDY_STA			(SPM_BASE + 0x1D0)
-#define MISC_STA			(SPM_BASE + 0x1D4)
-#define MCU_PWR_CON			(SPM_BASE + 0x200)
-#define MP0_CPUTOP_PWR_CON		(SPM_BASE + 0x204)
-#define MP0_CPU0_PWR_CON		(SPM_BASE + 0x208)
-#define MP0_CPU1_PWR_CON		(SPM_BASE + 0x20C)
-#define MP0_CPU2_PWR_CON		(SPM_BASE + 0x210)
-#define MP0_CPU3_PWR_CON		(SPM_BASE + 0x214)
-#define MP1_CPUTOP_PWR_CON		(SPM_BASE + 0x218)
-#define MP1_CPU0_PWR_CON		(SPM_BASE + 0x21C)
-#define MP1_CPU1_PWR_CON		(SPM_BASE + 0x220)
-#define MP1_CPU2_PWR_CON		(SPM_BASE + 0x224)
-#define MP1_CPU3_PWR_CON		(SPM_BASE + 0x228)
-#define MP0_CPUTOP_L2_PDN		(SPM_BASE + 0x240)
-#define MP0_CPUTOP_L2_SLEEP_B		(SPM_BASE + 0x244)
-#define MP0_CPU0_L1_PDN			(SPM_BASE + 0x248)
-#define MP0_CPU1_L1_PDN			(SPM_BASE + 0x24C)
-#define MP0_CPU2_L1_PDN			(SPM_BASE + 0x250)
-#define MP0_CPU3_L1_PDN			(SPM_BASE + 0x254)
-#define MP1_CPUTOP_L2_PDN		(SPM_BASE + 0x258)
-#define MP1_CPUTOP_L2_SLEEP_B		(SPM_BASE + 0x25C)
-#define MP1_CPU0_L1_PDN			(SPM_BASE + 0x260)
-#define MP1_CPU1_L1_PDN			(SPM_BASE + 0x264)
-#define MP1_CPU2_L1_PDN			(SPM_BASE + 0x268)
-#define MP1_CPU3_L1_PDN			(SPM_BASE + 0x26C)
-#define CPU_EXT_BUCK_ISO		(SPM_BASE + 0x290)
-#define DUMMY1_PWR_CON			(SPM_BASE + 0x2B0)
-#define BYPASS_SPMC			(SPM_BASE + 0x2B4)
-#define SPMC_DORMANT_ENABLE		(SPM_BASE + 0x2B8)
-#define ARMPLL_CLK_CON			(SPM_BASE + 0x2BC)
-#define SPMC_IN_RET			(SPM_BASE + 0x2C0)
-#define VDE_PWR_CON			(SPM_BASE + 0x300)
-#define VEN_PWR_CON			(SPM_BASE + 0x304)
-#define ISP_PWR_CON			(SPM_BASE + 0x308)
-#define DIS_PWR_CON			(SPM_BASE + 0x30C)
-#define MJC_PWR_CON			(SPM_BASE + 0x310)
-#define AUDIO_PWR_CON			(SPM_BASE + 0x314)
-#define IFR_PWR_CON			(SPM_BASE + 0x318)
-#define DPY_PWR_CON			(SPM_BASE + 0x31C)
-#define MD1_PWR_CON			(SPM_BASE + 0x320)
-#define MD2_PWR_CON			(SPM_BASE + 0x324)
-#define C2K_PWR_CON			(SPM_BASE + 0x328)
-#define CONN_PWR_CON			(SPM_BASE + 0x32C)
-#define VCOREPDN_PWR_CON		(SPM_BASE + 0x330)
-#define MFG_ASYNC_PWR_CON		(SPM_BASE + 0x334)
-#define MFG_PWR_CON			(SPM_BASE + 0x338)
-#define MFG_CORE0_PWR_CON		(SPM_BASE + 0x33C)
-#define MFG_CORE1_PWR_CON		(SPM_BASE + 0x340)
-#define CAM_PWR_CON			(SPM_BASE + 0x344)
-#define SYSRAM_CON			(SPM_BASE + 0x350)
-#define SYSROM_CON			(SPM_BASE + 0x354)
-#define SCP_SRAM_CON			(SPM_BASE + 0x358)
-#define GCPU_SRAM_CON			(SPM_BASE + 0x35C)
-#define MDSYS_INTF_INFRA_PWR_CON	(SPM_BASE + 0x360)
-#define MDSYS_INTF_MD1_PWR_CON		(SPM_BASE + 0x364)
-#define MDSYS_INTF_C2K_PWR_CON		(SPM_BASE + 0x368)
-#define BSI_TOP_SRAM_CON		(SPM_BASE + 0x370)
-#define DVFSP_SRAM_CON			(SPM_BASE + 0x374)
-#define MD_EXT_BUCK_ISO			(SPM_BASE + 0x390)
-#define DUMMY2_PWR_CON			(SPM_BASE + 0x3B0)
-#define MD1_OUTPUT_PISO_S_EN_IZ		(SPM_BASE + 0x3B4)
-#define SPM_DVFS_CON			(SPM_BASE + 0x400)
-#define SPM_MDBSI_CON			(SPM_BASE + 0x404)
-#define SPM_MAS_PAUSE_MASK_B		(SPM_BASE + 0x408)
-#define SPM_MAS_PAUSE2_MASK_B		(SPM_BASE + 0x40C)
-#define SPM_BSI_GEN			(SPM_BASE + 0x410)
-#define SPM_BSI_EN_SR			(SPM_BASE + 0x414)
-#define SPM_BSI_CLK_SR			(SPM_BASE + 0x418)
-#define SPM_BSI_D0_SR			(SPM_BASE + 0x41C)
-#define SPM_BSI_D1_SR			(SPM_BASE + 0x420)
-#define SPM_BSI_D2_SR			(SPM_BASE + 0x424)
-#define SPM_AP_SEMA			(SPM_BASE + 0x428)
-#define SPM_SPM_SEMA			(SPM_BASE + 0x42C)
-#define AP2MD_CROSS_TRIGGER		(SPM_BASE + 0x430)
-#define AP_MDSRC_REQ			(SPM_BASE + 0x434)
-#define SPM2MD_DVFS_CON			(SPM_BASE + 0x438)
-#define MD2SPM_DVFS_CON			(SPM_BASE + 0x43C)
-#define DRAMC_DPY_CLK_SW_CON_RSV	(SPM_BASE + 0x440)
-#define DPY_LP_CON			(SPM_BASE + 0x444)
-#define CPU_DVFS_REQ			(SPM_BASE + 0x448)
-#define SPM_PLL_CON			(SPM_BASE + 0x44C)
-#define SPM_EMI_BW_MODE			(SPM_BASE + 0x450)
-#define AP2MD_PEER_WAKEUP		(SPM_BASE + 0x454)
-#define ULPOSC_CON			(SPM_BASE + 0x458)
-#define DRAMC_DPY_CLK_SW_CON_SEL	(SPM_BASE + 0x460)
-#define DRAMC_DPY_CLK_SW_CON		(SPM_BASE + 0x464)
-#define DRAMC_DPY_CLK_SW_CON_SEL2	(SPM_BASE + 0x470)
-#define DRAMC_DPY_CLK_SW_CON2		(SPM_BASE + 0x474)
-#define SPM_SEMA_M0			(SPM_BASE + 0x480)
-#define SPM_SEMA_M1			(SPM_BASE + 0x484)
-#define SPM_SEMA_M2			(SPM_BASE + 0x488)
-#define SPM_SEMA_M3			(SPM_BASE + 0x48C)
-#define SPM_SEMA_M4			(SPM_BASE + 0x490)
-#define SPM_SEMA_M5			(SPM_BASE + 0x494)
-#define SPM_SEMA_M6			(SPM_BASE + 0x498)
-#define SPM_SEMA_M7			(SPM_BASE + 0x49C)
-#define SPM_SEMA_M8			(SPM_BASE + 0x4A0)
-#define SPM_SEMA_M9			(SPM_BASE + 0x4A4)
-#define SRAM_DREQ_ACK			(SPM_BASE + 0x4AC)
-#define SRAM_DREQ_CON			(SPM_BASE + 0x4B0)
-#define SRAM_DREQ_CON_SET		(SPM_BASE + 0x4B4)
-#define SRAM_DREQ_CON_CLR		(SPM_BASE + 0x4B8)
-#define MP0_CPU0_IRQ_MASK		(SPM_BASE + 0x500)
-#define MP0_CPU1_IRQ_MASK		(SPM_BASE + 0x504)
-#define MP0_CPU2_IRQ_MASK		(SPM_BASE + 0x508)
-#define MP0_CPU3_IRQ_MASK		(SPM_BASE + 0x50C)
-#define MP1_CPU0_IRQ_MASK		(SPM_BASE + 0x510)
-#define MP1_CPU1_IRQ_MASK		(SPM_BASE + 0x514)
-#define MP1_CPU2_IRQ_MASK		(SPM_BASE + 0x518)
-#define MP1_CPU3_IRQ_MASK		(SPM_BASE + 0x51C)
-#define MP0_CPU0_WFI_EN			(SPM_BASE + 0x530)
-#define MP0_CPU1_WFI_EN			(SPM_BASE + 0x534)
-#define MP0_CPU2_WFI_EN			(SPM_BASE + 0x538)
-#define MP0_CPU3_WFI_EN			(SPM_BASE + 0x53C)
-#define MP1_CPU0_WFI_EN			(SPM_BASE + 0x540)
-#define MP1_CPU1_WFI_EN			(SPM_BASE + 0x544)
-#define MP1_CPU2_WFI_EN			(SPM_BASE + 0x548)
-#define MP1_CPU3_WFI_EN			(SPM_BASE + 0x54C)
-#define CPU_PTPOD2_CON			(SPM_BASE + 0x560)
-#define ROOT_CPUTOP_ADDR		(SPM_BASE + 0x570)
-#define ROOT_CORE_ADDR			(SPM_BASE + 0x574)
-#define CPU_SPARE_CON			(SPM_BASE + 0x580)
-#define CPU_SPARE_CON_SET		(SPM_BASE + 0x584)
-#define CPU_SPARE_CON_CLR		(SPM_BASE + 0x588)
-#define SPM_SW_FLAG			(SPM_BASE + 0x600)
-#define SPM_SW_DEBUG			(SPM_BASE + 0x604)
-#define SPM_SW_RSV_0			(SPM_BASE + 0x608)
-#define SPM_SW_RSV_1			(SPM_BASE + 0x60C)
-#define SPM_SW_RSV_2			(SPM_BASE + 0x610)
-#define SPM_SW_RSV_3			(SPM_BASE + 0x614)
-#define SPM_SW_RSV_4			(SPM_BASE + 0x618)
-#define SPM_SW_RSV_5			(SPM_BASE + 0x61C)
-#define SPM_RSV_CON			(SPM_BASE + 0x620)
-#define SPM_RSV_STA			(SPM_BASE + 0x624)
-#define SPM_PASR_DPD_0			(SPM_BASE + 0x630)
-#define SPM_PASR_DPD_1			(SPM_BASE + 0x634)
-#define SPM_PASR_DPD_2			(SPM_BASE + 0x638)
-#define SPM_PASR_DPD_3			(SPM_BASE + 0x63C)
-#define SPM_SPARE_CON			(SPM_BASE + 0x640)
-#define SPM_SPARE_CON_SET		(SPM_BASE + 0x644)
-#define SPM_SPARE_CON_CLR		(SPM_BASE + 0x648)
-#define SPM_SW_RSV_6			(SPM_BASE + 0x64C)
-#define SPM_SW_RSV_7			(SPM_BASE + 0x650)
-#define SPM_SW_RSV_8			(SPM_BASE + 0x654)
-#define SPM_SW_RSV_9			(SPM_BASE + 0x658)
-#define SPM_SW_RSV_10			(SPM_BASE + 0x65C)
-#define SPM_SW_RSV_11			(SPM_BASE + 0x660)
-#define SPM_SW_RSV_12			(SPM_BASE + 0x664)
-#define SPM_SW_RSV_13			(SPM_BASE + 0x668)
-#define SPM_SW_RSV_14			(SPM_BASE + 0x66C)
-#define SPM_SW_RSV_15			(SPM_BASE + 0x670)
-#define SPM_SW_RSV_16			(SPM_BASE + 0x674)
-#define SPM_SW_RSV_17			(SPM_BASE + 0x678)
-#define SPM_SW_RSV_18			(SPM_BASE + 0x67C)
-#define SPM_SW_RSV_19			(SPM_BASE + 0x680)
-#define SW_CRTL_EVENT			(SPM_BASE + 0x690)
-
-
-#define MP1_CPU3_PWR_STA_MASK	(1U << 19)
-#define MP1_CPU2_PWR_STA_MASK	(1U << 18)
-#define MP1_CPU1_PWR_STA_MASK	(1U << 17)
-#define MP1_CPU0_PWR_STA_MASK	(1U << 16)
-#define MP1_CPUTOP_PWR_STA_MASK	(1U << 15)
-#define MCU_PWR_STA_MASK	(1U << 14)
-#define MP0_CPU3_PWR_STA_MASK	(1U << 12)
-#define MP0_CPU2_PWR_STA_MASK	(1U << 11)
-#define MP0_CPU1_PWR_STA_MASK	(1U << 10)
-#define MP0_CPU0_PWR_STA_MASK	(1U << 9)
-#define MP0_CPUTOP_PWR_STA_MASK	(1U << 8)
-
-
-#define MP1_CPU3_STANDBYWFI	(1U << 17)
-#define MP1_CPU2_STANDBYWFI	(1U << 16)
-#define MP1_CPU1_STANDBYWFI	(1U << 15)
-#define MP1_CPU0_STANDBYWFI	(1U << 14)
-#define MP0_CPU3_STANDBYWFI	(1U << 13)
-#define MP0_CPU2_STANDBYWFI	(1U << 12)
-#define MP0_CPU1_STANDBYWFI	(1U << 11)
-#define MP0_CPU0_STANDBYWFI	(1U << 10)
-
-#define MP0_SPMC_SRAM_DORMANT_EN	(1<<0)
-#define MP1_SPMC_SRAM_DORMANT_EN	(1<<1)
-#define MP2_SPMC_SRAM_DORMANT_EN	(1<<2)
-
-/* POWERON_CONFIG_EN (0x10006000+0x000) */
-#define BCLK_CG_EN_LSB                      (1U << 0)       /* 1b */
-#define PROJECT_CODE_LSB                    (1U << 16)      /* 16b */
-
-/* SPM_POWER_ON_VAL0 (0x10006000+0x004) */
-#define POWER_ON_VAL0_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_POWER_ON_VAL1 (0x10006000+0x008) */
-#define POWER_ON_VAL1_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_CLK_CON (0x10006000+0x00C) */
-#define SYSCLK0_EN_CTRL_LSB                 (1U << 0)       /* 2b */
-#define SYSCLK1_EN_CTRL_LSB                 (1U << 2)       /* 2b */
-#define SYS_SETTLE_SEL_LSB                  (1U << 4)       /* 1b */
-#define SPM_LOCK_INFRA_DCM_LSB              (1U << 5)       /* 1b */
-#define EXT_SRCCLKEN_MASK_LSB               (1U << 6)       /* 3b */
-#define CXO32K_REMOVE_EN_MD1_LSB            (1U << 9)       /* 1b */
-#define CXO32K_REMOVE_EN_MD2_LSB            (1U << 10)      /* 1b */
-#define CLKSQ0_SEL_CTRL_LSB                 (1U << 11)      /* 1b */
-#define CLKSQ1_SEL_CTRL_LSB                 (1U << 12)      /* 1b */
-#define SRCLKEN0_EN_LSB                     (1U << 13)      /* 1b */
-#define SRCLKEN1_EN_LSB                     (1U << 14)      /* 1b */
-#define SCP_DCM_EN_LSB                      (1U << 15)      /* 1b */
-#define SYSCLK0_SRC_MASK_B_LSB              (1U << 16)      /* 7b */
-#define SYSCLK1_SRC_MASK_B_LSB              (1U << 23)      /* 7b */
-
-/* SPM_CLK_SETTLE (0x10006000+0x010) */
-#define SYSCLK_SETTLE_LSB                   (1U << 0)       /* 28b */
-
-/* SPM_AP_STANDBY_CON (0x10006000+0x014) */
-#define WFI_OP_LSB                          (1U << 0)       /* 1b */
-#define MP0_CPUTOP_IDLE_MASK_LSB            (1U << 1)       /* 1b */
-#define MP1_CPUTOP_IDLE_MASK_LSB            (1U << 2)       /* 1b */
-#define MCUSYS_IDLE_MASK_LSB                (1U << 4)       /* 1b */
-#define MM_MASK_B_LSB                       (1U << 16)      /* 2b */
-#define MD_DDR_EN_DBC_EN_LSB                (1U << 18)      /* 1b */
-#define MD_MASK_B_LSB                       (1U << 19)      /* 2b */
-#define SCP_MASK_B_LSB                      (1U << 21)      /* 1b */
-#define LTE_MASK_B_LSB                      (1U << 22)      /* 1b */
-#define SRCCLKENI_MASK_B_LSB                (1U << 23)      /* 1b */
-#define MD_APSRC_1_SEL_LSB                  (1U << 24)      /* 1b */
-#define MD_APSRC_0_SEL_LSB                  (1U << 25)      /* 1b */
-#define CONN_MASK_B_LSB                     (1U << 26)      /* 1b */
-#define CONN_APSRC_SEL_LSB                  (1U << 27)      /* 1b */
-
-/* PCM_CON0 (0x10006000+0x018) */
-#define PCM_KICK_L_LSB                      (1U << 0)       /* 1b */
-#define IM_KICK_L_LSB                       (1U << 1)       /* 1b */
-#define PCM_CK_EN_LSB                       (1U << 2)       /* 1b */
-#define EN_IM_SLEEP_DVS_LSB                 (1U << 3)       /* 1b */
-#define IM_AUTO_PDN_EN_LSB                  (1U << 4)       /* 1b */
-#define PCM_SW_RESET_LSB                    (1U << 15)      /* 1b */
-#define PROJECT_CODE_LSB                    (1U << 16)      /* 16b */
-
-/* PCM_CON1 (0x10006000+0x01C) */
-#define IM_SLAVE_LSB                        (1U << 0)       /* 1b */
-#define IM_SLEEP_LSB                        (1U << 1)       /* 1b */
-#define MIF_APBEN_LSB                       (1U << 3)       /* 1b */
-#define IM_PDN_LSB                          (1U << 4)       /* 1b */
-#define PCM_TIMER_EN_LSB                    (1U << 5)       /* 1b */
-#define IM_NONRP_EN_LSB                     (1U << 6)       /* 1b */
-#define DIS_MIF_PROT_LSB                    (1U << 7)       /* 1b */
-#define PCM_WDT_EN_LSB                      (1U << 8)       /* 1b */
-#define PCM_WDT_WAKE_MODE_LSB               (1U << 9)       /* 1b */
-#define SPM_SRAM_SLEEP_B_LSB                (1U << 10)      /* 1b */
-#define SPM_SRAM_ISOINT_B_LSB               (1U << 11)      /* 1b */
-#define EVENT_LOCK_EN_LSB                   (1U << 12)      /* 1b */
-#define SRCCLKEN_FAST_RESP_LSB              (1U << 13)      /* 1b */
-#define SCP_APB_INTERNAL_EN_LSB             (1U << 14)      /* 1b */
-#define PROJECT_CODE_LSB                    (1U << 16)      /* 16b */
-
-/* PCM_IM_PTR (0x10006000+0x020) */
-#define PCM_IM_PTR_LSB                      (1U << 0)       /* 32b */
-
-/* PCM_IM_LEN (0x10006000+0x024) */
-#define PCM_IM_LEN_LSB                      (1U << 0)       /* 13b */
-
-/* PCM_REG_DATA_INI (0x10006000+0x028) */
-#define PCM_REG_DATA_INI_LSB                (1U << 0)       /* 32b */
-
-/* PCM_PWR_IO_EN (0x10006000+0x02C) */
-#define PCM_PWR_IO_EN_LSB                   (1U << 0)       /* 8b */
-#define PCM_RF_SYNC_EN_LSB                  (1U << 16)      /* 8b */
-
-/* PCM_TIMER_VAL (0x10006000+0x030) */
-#define PCM_TIMER_VAL_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_WDT_VAL (0x10006000+0x034) */
-#define PCM_WDT_VAL_LSB                     (1U << 0)       /* 32b */
-
-/* PCM_IM_HOST_RW_PTR (0x10006000+0x038) */
-#define PCM_IM_HOST_RW_PTR_LSB              (1U << 0)       /* 12b */
-#define PCM_IM_HOST_W_EN_LSB                (1U << 30)      /* 1b */
-#define PCM_IM_HOST_EN_LSB                  (1U << 31)      /* 1b */
-
-/* PCM_IM_HOST_RW_DAT (0x10006000+0x03C) */
-#define PCM_IM_HOST_RW_DAT_LSB              (1U << 0)       /* 32b */
-
-/* PCM_EVENT_VECTOR0 (0x10006000+0x040) */
-#define PCM_EVENT_VECTOR_0_LSB              (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_0_LSB              (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_0_LSB             (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_0_LSB              (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR1 (0x10006000+0x044) */
-#define PCM_EVENT_VECTOR_1_LSB              (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_1_LSB              (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_1_LSB             (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_1_LSB              (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR2 (0x10006000+0x048) */
-#define PCM_EVENT_VECTOR_2_LSB              (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_2_LSB              (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_2_LSB             (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_2_LSB              (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR3 (0x10006000+0x04C) */
-#define PCM_EVENT_VECTOR_3_LSB              (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_3_LSB              (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_3_LSB             (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_3_LSB              (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR4 (0x10006000+0x050) */
-#define PCM_EVENT_VECTOR_4_LSB              (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_4_LSB              (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_4_LSB             (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_4_LSB              (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR5 (0x10006000+0x054) */
-#define PCM_EVENT_VECTOR_5_LSB              (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_5_LSB              (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_5_LSB             (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_5_LSB              (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR6 (0x10006000+0x058) */
-#define PCM_EVENT_VECTOR_6_LSB              (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_6_LSB              (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_6_LSB             (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_6_LSB              (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR7 (0x10006000+0x05C) */
-#define PCM_EVENT_VECTOR_7_LSB              (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_7_LSB              (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_7_LSB             (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_7_LSB              (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR8 (0x10006000+0x060) */
-#define PCM_EVENT_VECTOR_8_LSB              (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_8_LSB              (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_8_LSB             (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_8_LSB              (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR9 (0x10006000+0x064) */
-#define PCM_EVENT_VECTOR_9_LSB              (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_9_LSB              (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_9_LSB             (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_9_LSB              (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR10 (0x10006000+0x068) */
-#define PCM_EVENT_VECTOR_10_LSB             (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_10_LSB             (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_10_LSB            (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_10_LSB             (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR11 (0x10006000+0x06C) */
-#define PCM_EVENT_VECTOR_11_LSB             (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_11_LSB             (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_11_LSB            (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_11_LSB             (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR12 (0x10006000+0x070) */
-#define PCM_EVENT_VECTOR_12_LSB             (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_12_LSB             (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_12_LSB            (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_12_LSB             (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR13 (0x10006000+0x074) */
-#define PCM_EVENT_VECTOR_13_LSB             (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_13_LSB             (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_13_LSB            (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_13_LSB             (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR14 (0x10006000+0x078) */
-#define PCM_EVENT_VECTOR_14_LSB             (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_14_LSB             (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_14_LSB            (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_14_LSB             (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR15 (0x10006000+0x07C) */
-#define PCM_EVENT_VECTOR_15_LSB             (1U << 0)       /* 6b */
-#define PCM_EVENT_RESUME_15_LSB             (1U << 6)       /* 1b */
-#define PCM_EVENT_IMMEDIA_15_LSB            (1U << 7)       /* 1b */
-#define PCM_EVENT_VECTPC_15_LSB             (1U << 16)      /* 11b */
-
-/* PCM_EVENT_VECTOR_EN (0x10006000+0x080) */
-#define PCM_EVENT_VECTOR_EN_LSB             (1U << 0)       /* 16b */
-
-/* SPM_SWINT (0x10006000+0x08C) */
-#define SPM_SWINT_LSB                       (1U << 0)       /* 10b */
-
-/* SPM_SWINT_SET (0x10006000+0x090) */
-#define SPM_SWINT_SET_LSB                   (1U << 0)       /* 10b */
-
-/* SPM_SWINT_CLR (0x10006000+0x094) */
-#define SPM_SWINT_CLR_LSB                   (1U << 0)       /* 10b */
-
-/* SPM_SCP_MAILBOX (0x10006000+0x098) */
-#define SPM_SCP_MAILBOX_LSB                 (1U << 0)       /* 32b */
-
-/* SPM_SCP_IRQ (0x10006000+0x09C) */
-#define SPM_SCP_IRQ_LSB                     (1U << 0)       /* 1b */
-#define SPM_SCP_IRQ_SEL_LSB                 (1U << 4)       /* 1b */
-
-/* SPM_TWAM_CON (0x10006000+0x0A0) */
-#define TWAM_ENABLE_LSB                     (1U << 0)       /* 1b */
-#define TWAM_SPEED_MODE_ENABLE_LSB          (1U << 1)       /* 1b */
-#define TWAM_SW_RST_LSB                     (1U << 2)       /* 1b */
-#define TWAM_MON_TYPE0_LSB                  (1U << 4)       /* 2b */
-#define TWAM_MON_TYPE1_LSB                  (1U << 6)       /* 2b */
-#define TWAM_MON_TYPE2_LSB                  (1U << 8)       /* 2b */
-#define TWAM_MON_TYPE3_LSB                  (1U << 10)      /* 2b */
-#define TWAM_SIGNAL_SEL0_LSB                (1U << 12)      /* 5b */
-#define TWAM_SIGNAL_SEL1_LSB                (1U << 17)      /* 5b */
-#define TWAM_SIGNAL_SEL2_LSB                (1U << 22)      /* 5b */
-#define TWAM_SIGNAL_SEL3_LSB                (1U << 27)      /* 5b */
-
-/* SPM_TWAM_WINDOW_LEN (0x10006000+0x0A4) */
-#define TWAM_WINDOW_LEN_LSB                 (1U << 0)       /* 32b */
-
-/* SPM_TWAM_IDLE_SEL (0x10006000+0x0A8) */
-#define TWAM_IDLE_SEL_LSB                   (1U << 0)       /* 5b */
-
-/* SPM_CPU_WAKEUP_EVENT (0x10006000+0x0B0) */
-#define SPM_CPU_WAKEUP_EVENT_LSB            (1U << 0)       /* 1b */
-
-/* SPM_IRQ_MASK (0x10006000+0x0B4) */
-#define SPM_TWAM_IRQ_MASK_LSB               (1U << 2)       /* 1b */
-#define PCM_IRQ_ROOT_MASK_LSB               (1U << 3)       /* 1b */
-#define SPM_IRQ_MASK_LSB                    (1U << 8)       /* 10b */
-
-/* SPM_SRC_REQ (0x10006000+0x0B8) */
-#define SPM_APSRC_REQ_LSB                   (1U << 0)       /* 1b */
-#define SPM_F26M_REQ_LSB                    (1U << 1)       /* 1b */
-#define SPM_LTE_REQ_LSB                     (1U << 2)       /* 1b */
-#define SPM_INFRA_REQ_LSB                   (1U << 3)       /* 1b */
-#define SPM_VRF18_REQ_LSB                   (1U << 4)       /* 1b */
-#define SPM_DVFS_REQ_LSB                    (1U << 5)       /* 1b */
-#define SPM_DVFS_FORCE_DOWN_LSB             (1U << 6)       /* 1b */
-#define SPM_DDREN_REQ_LSB                   (1U << 7)       /* 1b */
-#define SPM_RSV_SRC_REQ_LSB                 (1U << 8)       /* 3b */
-#define CPU_MD_DVFS_SOP_FORCE_ON_LSB        (1U << 16)      /* 1b */
-
-/* SPM_SRC_MASK (0x10006000+0x0BC) */
-#define CSYSPWREQ_MASK_LSB                  (1U << 0)       /* 1b */
-#define CCIF0_MD_EVENT_MASK_B_LSB           (1U << 1)       /* 1b */
-#define CCIF0_AP_EVENT_MASK_B_LSB           (1U << 2)       /* 1b */
-#define CCIF1_MD_EVENT_MASK_B_LSB           (1U << 3)       /* 1b */
-#define CCIF1_AP_EVENT_MASK_B_LSB           (1U << 4)       /* 1b */
-#define CCIFMD_MD1_EVENT_MASK_B_LSB         (1U << 5)       /* 1b */
-#define CCIFMD_MD2_EVENT_MASK_B_LSB         (1U << 6)       /* 1b */
-#define DSI0_VSYNC_MASK_B_LSB               (1U << 7)       /* 1b */
-#define DSI1_VSYNC_MASK_B_LSB               (1U << 8)       /* 1b */
-#define DPI_VSYNC_MASK_B_LSB                (1U << 9)       /* 1b */
-#define ISP0_VSYNC_MASK_B_LSB               (1U << 10)      /* 1b */
-#define ISP1_VSYNC_MASK_B_LSB               (1U << 11)      /* 1b */
-#define MD_SRCCLKENA_0_INFRA_MASK_B_LSB     (1U << 12)      /* 1b */
-#define MD_SRCCLKENA_1_INFRA_MASK_B_LSB     (1U << 13)      /* 1b */
-#define CONN_SRCCLKENA_INFRA_MASK_B_LSB     (1U << 14)      /* 1b */
-#define MD32_SRCCLKENA_INFRA_MASK_B_LSB     (1U << 15)      /* 1b */
-#define SRCCLKENI_INFRA_MASK_B_LSB          (1U << 16)      /* 1b */
-#define MD_APSRC_REQ_0_INFRA_MASK_B_LSB     (1U << 17)      /* 1b */
-#define MD_APSRC_REQ_1_INFRA_MASK_B_LSB     (1U << 18)      /* 1b */
-#define CONN_APSRCREQ_INFRA_MASK_B_LSB      (1U << 19)      /* 1b */
-#define MD32_APSRCREQ_INFRA_MASK_B_LSB      (1U << 20)      /* 1b */
-#define MD_DDR_EN_0_MASK_B_LSB              (1U << 21)      /* 1b */
-#define MD_DDR_EN_1_MASK_B_LSB              (1U << 22)      /* 1b */
-#define MD_VRF18_REQ_0_MASK_B_LSB           (1U << 23)      /* 1b */
-#define MD_VRF18_REQ_1_MASK_B_LSB           (1U << 24)      /* 1b */
-#define MD1_DVFS_REQ_MASK_LSB               (1U << 25)      /* 2b */
-#define CPU_DVFS_REQ_MASK_LSB               (1U << 27)      /* 1b */
-#define EMI_BW_DVFS_REQ_MASK_LSB            (1U << 28)      /* 1b */
-#define MD_SRCCLKENA_0_DVFS_REQ_MASK_B_LSB  (1U << 29)      /* 1b */
-#define MD_SRCCLKENA_1_DVFS_REQ_MASK_B_LSB  (1U << 30)      /* 1b */
-#define CONN_SRCCLKENA_DVFS_REQ_MASK_B_LSB  (1U << 31)      /* 1b */
-
-/* SPM_SRC2_MASK (0x10006000+0x0C0) */
-#define DVFS_HALT_MASK_B_LSB                (1U << 0)       /* 5b */
-#define VDEC_REQ_MASK_B_LSB                 (1U << 6)       /* 1b */
-#define GCE_REQ_MASK_B_LSB                  (1U << 7)       /* 1b */
-#define CPU_MD_DVFS_REQ_MERGE_MASK_B_LSB    (1U << 8)       /* 1b */
-#define MD_DDR_EN_DVFS_HALT_MASK_B_LSB      (1U << 9)       /* 2b */
-#define DSI0_VSYNC_DVFS_HALT_MASK_B_LSB     (1U << 11)      /* 1b */
-#define DSI1_VSYNC_DVFS_HALT_MASK_B_LSB     (1U << 12)      /* 1b */
-#define DPI_VSYNC_DVFS_HALT_MASK_B_LSB      (1U << 13)      /* 1b */
-#define ISP0_VSYNC_DVFS_HALT_MASK_B_LSB     (1U << 14)      /* 1b */
-#define ISP1_VSYNC_DVFS_HALT_MASK_B_LSB     (1U << 15)      /* 1b */
-#define CONN_DDR_EN_MASK_B_LSB              (1U << 16)      /* 1b */
-#define DISP_REQ_MASK_B_LSB                 (1U << 17)      /* 1b */
-#define DISP1_REQ_MASK_B_LSB                (1U << 18)      /* 1b */
-#define MFG_REQ_MASK_B_LSB                  (1U << 19)      /* 1b */
-#define C2K_PS_RCCIF_WAKE_MASK_B_LSB        (1U << 20)      /* 1b */
-#define C2K_L1_RCCIF_WAKE_MASK_B_LSB        (1U << 21)      /* 1b */
-#define PS_C2K_RCCIF_WAKE_MASK_B_LSB        (1U << 22)      /* 1b */
-#define L1_C2K_RCCIF_WAKE_MASK_B_LSB        (1U << 23)      /* 1b */
-#define SDIO_ON_DVFS_REQ_MASK_B_LSB         (1U << 24)      /* 1b */
-#define EMI_BOOST_DVFS_REQ_MASK_B_LSB       (1U << 25)      /* 1b */
-#define CPU_MD_EMI_DVFS_REQ_PROT_DIS_LSB    (1U << 26)      /* 1b */
-#define DRAMC_SPCMD_APSRC_REQ_MASK_B_LSB    (1U << 27)      /* 1b */
-
-/* SPM_WAKEUP_EVENT_MASK (0x10006000+0x0C4) */
-#define SPM_WAKEUP_EVENT_MASK_LSB           (1U << 0)       /* 32b */
-
-/* SPM_WAKEUP_EVENT_EXT_MASK (0x10006000+0x0C8) */
-#define SPM_WAKEUP_EVENT_EXT_MASK_LSB       (1U << 0)       /* 32b */
-
-/* SCP_CLK_CON (0x10006000+0x0D0) */
-#define SCP_26M_CK_SEL_LSB                  (1U << 0)       /* 1b */
-
-/* PCM_DEBUG_CON (0x10006000+0x0D4) */
-#define PCM_DEBUG_OUT_ENABLE_LSB            (1U << 0)       /* 1b */
-
-/* PCM_REG0_DATA (0x10006000+0x100) */
-#define PCM_REG0_DATA_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_REG1_DATA (0x10006000+0x104) */
-#define PCM_REG1_DATA_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_REG2_DATA (0x10006000+0x108) */
-#define PCM_REG2_DATA_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_REG3_DATA (0x10006000+0x10C) */
-#define PCM_REG3_DATA_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_REG4_DATA (0x10006000+0x110) */
-#define PCM_REG4_DATA_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_REG5_DATA (0x10006000+0x114) */
-#define PCM_REG5_DATA_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_REG6_DATA (0x10006000+0x118) */
-#define PCM_REG6_DATA_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_REG7_DATA (0x10006000+0x11C) */
-#define PCM_REG7_DATA_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_REG8_DATA (0x10006000+0x120) */
-#define PCM_REG8_DATA_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_REG9_DATA (0x10006000+0x124) */
-#define PCM_REG9_DATA_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_REG10_DATA (0x10006000+0x128) */
-#define PCM_REG10_DATA_LSB                  (1U << 0)       /* 32b */
-
-/* PCM_REG11_DATA (0x10006000+0x12C) */
-#define PCM_REG11_DATA_LSB                  (1U << 0)       /* 32b */
-
-/* PCM_REG12_DATA (0x10006000+0x130) */
-#define PCM_REG12_DATA_LSB                  (1U << 0)       /* 32b */
-
-/* PCM_REG13_DATA (0x10006000+0x134) */
-#define PCM_REG13_DATA_LSB                  (1U << 0)       /* 32b */
-
-/* PCM_REG14_DATA (0x10006000+0x138) */
-#define PCM_REG14_DATA_LSB                  (1U << 0)       /* 32b */
-
-/* PCM_REG15_DATA (0x10006000+0x13C) */
-#define PCM_REG15_DATA_LSB                  (1U << 0)       /* 32b */
-
-/* PCM_REG12_MASK_B_STA (0x10006000+0x140) */
-#define PCM_REG12_MASK_B_STA_LSB            (1U << 0)       /* 32b */
-
-/* PCM_REG12_EXT_DATA (0x10006000+0x144) */
-#define PCM_REG12_EXT_DATA_LSB              (1U << 0)       /* 32b */
-
-/* PCM_REG12_EXT_MASK_B_STA (0x10006000+0x148) */
-#define PCM_REG12_EXT_MASK_B_STA_LSB        (1U << 0)       /* 32b */
-
-/* PCM_EVENT_REG_STA (0x10006000+0x14C) */
-#define PCM_EVENT_REG_STA_LSB               (1U << 0)       /* 32b */
-
-/* PCM_TIMER_OUT (0x10006000+0x150) */
-#define PCM_TIMER_OUT_LSB                   (1U << 0)       /* 32b */
-
-/* PCM_WDT_OUT (0x10006000+0x154) */
-#define PCM_WDT_OUT_LSB                     (1U << 0)       /* 32b */
-
-/* SPM_IRQ_STA (0x10006000+0x158) */
-#define TWAM_IRQ_LSB                        (1U << 2)       /* 1b */
-#define PCM_IRQ_LSB                         (1U << 3)       /* 1b */
-#define SPM_IRQ_SWINT_LSB                   (1U << 4)       /* 10b */
-
-/* SPM_WAKEUP_STA (0x10006000+0x15C) */
-#define SPM_WAKEUP_EVENT_STA_LSB            (1U << 0)       /* 32b */
-
-/* SPM_WAKEUP_EXT_STA (0x10006000+0x160) */
-#define SPM_WAKEUP_EVENT_EXT_STA_LSB        (1U << 0)       /* 32b */
-
-/* SPM_WAKEUP_MISC (0x10006000+0x164) */
-#define SPM_WAKEUP_EVENT_MISC_LSB           (1U << 0)       /* 30b */
-#define SPM_PWRAP_IRQ_ACK_LSB               (1U << 30)      /* 1b */
-#define SPM_PWRAP_IRQ_LSB                   (1U << 31)      /* 1b */
-
-/* BUS_PROTECT_RDY (0x10006000+0x168) */
-#define BUS_PROTECT_RDY_LSB                 (1U << 0)       /* 32b */
-
-/* BUS_PROTECT2_RDY (0x10006000+0x16C) */
-#define BUS_PROTECT2_RDY_LSB                (1U << 0)       /* 32b */
-
-/* SUBSYS_IDLE_STA (0x10006000+0x170) */
-#define SUBSYS_IDLE_STA_LSB                 (1U << 0)       /* 32b */
-
-/* CPU_IDLE_STA (0x10006000+0x174) */
-#define MP0_CPU0_STANDBYWFI_AFTER_SEL_LSB   (1U << 0)       /* 1b */
-#define MP0_CPU1_STANDBYWFI_AFTER_SEL_LSB   (1U << 1)       /* 1b */
-#define MP0_CPU2_STANDBYWFI_AFTER_SEL_LSB   (1U << 2)       /* 1b */
-#define MP0_CPU3_STANDBYWFI_AFTER_SEL_LSB   (1U << 3)       /* 1b */
-#define MP1_CPU0_STANDBYWFI_AFTER_SEL_LSB   (1U << 4)       /* 1b */
-#define MP1_CPU1_STANDBYWFI_AFTER_SEL_LSB   (1U << 5)       /* 1b */
-#define MP1_CPU2_STANDBYWFI_AFTER_SEL_LSB   (1U << 6)       /* 1b */
-#define MP1_CPU3_STANDBYWFI_AFTER_SEL_LSB   (1U << 7)       /* 1b */
-#define MP0_CPU0_STANDBYWFI_LSB             (1U << 10)      /* 1b */
-#define MP0_CPU1_STANDBYWFI_LSB             (1U << 11)      /* 1b */
-#define MP0_CPU2_STANDBYWFI_LSB             (1U << 12)      /* 1b */
-#define MP0_CPU3_STANDBYWFI_LSB             (1U << 13)      /* 1b */
-#define MP1_CPU0_STANDBYWFI_LSB             (1U << 14)      /* 1b */
-#define MP1_CPU1_STANDBYWFI_LSB             (1U << 15)      /* 1b */
-#define MP1_CPU2_STANDBYWFI_LSB             (1U << 16)      /* 1b */
-#define MP1_CPU3_STANDBYWFI_LSB             (1U << 17)      /* 1b */
-#define MP0_CPUTOP_IDLE_LSB                 (1U << 20)      /* 1b */
-#define MP1_CPUTOP_IDLE_LSB                 (1U << 21)      /* 1b */
-#define MCU_BIU_IDLE_LSB                    (1U << 22)      /* 1b */
-#define MCUSYS_IDLE_LSB                     (1U << 23)      /* 1b */
-
-/* PCM_FSM_STA (0x10006000+0x178) */
-#define EXEC_INST_OP_LSB                    (1U << 0)       /* 4b */
-#define PC_STATE_LSB                        (1U << 4)       /* 3b */
-#define IM_STATE_LSB                        (1U << 7)       /* 3b */
-#define MASTER_STATE_LSB                    (1U << 10)      /* 5b */
-#define EVENT_FSM_LSB                       (1U << 15)      /* 3b */
-#define PCM_CLK_SEL_STA_LSB                 (1U << 18)      /* 3b */
-#define PCM_KICK_LSB                        (1U << 21)      /* 1b */
-#define IM_KICK_LSB                         (1U << 22)      /* 1b */
-#define EXT_SRCCLKEN_STA_LSB                (1U << 23)      /* 2b */
-#define EXT_SRCVOLTEN_STA_LSB               (1U << 25)      /* 1b */
-
-/* PWR_STATUS (0x10006000+0x180) */
-#define PWR_STATUS_LSB                      (1U << 0)       /* 32b */
-
-/* PWR_STATUS_2ND (0x10006000+0x184) */
-#define PWR_STATUS_2ND_LSB                  (1U << 0)       /* 32b */
-
-/* CPU_PWR_STATUS (0x10006000+0x188) */
-#define CPU_PWR_STATUS_LSB                  (1U << 0)       /* 32b */
-
-/* CPU_PWR_STATUS_2ND (0x10006000+0x18C) */
-#define CPU_PWR_STATUS_2ND_LSB              (1U << 0)       /* 32b */
-
-/* PCM_WDT_LATCH_0 (0x10006000+0x190) */
-#define PCM_WDT_LATCH_0_LSB                 (1U << 0)       /* 32b */
-
-/* PCM_WDT_LATCH_1 (0x10006000+0x194) */
-#define PCM_WDT_LATCH_1_LSB                 (1U << 0)       /* 32b */
-
-/* PCM_WDT_LATCH_2 (0x10006000+0x198) */
-#define PCM_WDT_LATCH_2_LSB                 (1U << 0)       /* 32b */
-
-/* DRAMC_DBG_LATCH (0x10006000+0x19C) */
-#define DRAMC_DEBUG_LATCH_STATUS_LSB        (1U << 0)       /* 32b */
-
-/* SPM_TWAM_LAST_STA0 (0x10006000+0x1A0) */
-#define SPM_TWAM_LAST_STA0_LSB              (1U << 0)       /* 32b */
-
-/* SPM_TWAM_LAST_STA1 (0x10006000+0x1A4) */
-#define SPM_TWAM_LAST_STA1_LSB              (1U << 0)       /* 32b */
-
-/* SPM_TWAM_LAST_STA2 (0x10006000+0x1A8) */
-#define SPM_TWAM_LAST_STA2_LSB              (1U << 0)       /* 32b */
-
-/* SPM_TWAM_LAST_STA3 (0x10006000+0x1AC) */
-#define SPM_TWAM_LAST_STA3_LSB              (1U << 0)       /* 32b */
-
-/* SPM_TWAM_CURR_STA0 (0x10006000+0x1B0) */
-#define SPM_TWAM_CURR_STA0_LSB              (1U << 0)       /* 32b */
-
-/* SPM_TWAM_CURR_STA1 (0x10006000+0x1B4) */
-#define SPM_TWAM_CURR_STA1_LSB              (1U << 0)       /* 32b */
-
-/* SPM_TWAM_CURR_STA2 (0x10006000+0x1B8) */
-#define SPM_TWAM_CURR_STA2_LSB              (1U << 0)       /* 32b */
-
-/* SPM_TWAM_CURR_STA3 (0x10006000+0x1BC) */
-#define SPM_TWAM_CURR_STA3_LSB              (1U << 0)       /* 32b */
-
-/* SPM_TWAM_TIMER_OUT (0x10006000+0x1C0) */
-#define SPM_TWAM_TIMER_OUT_LSB              (1U << 0)       /* 32b */
-
-/* PCM_WDT_LATCH_3 (0x10006000+0x1C4) */
-#define PCM_WDT_LATCH_3_LSB                 (1U << 0)       /* 32b */
-
-/* SPM_SRC_RDY_STA (0x10006000+0x1D0) */
-#define SPM_INFRA_SRC_ACK_LSB               (1U << 0)       /* 1b */
-#define SPM_VRF18_SRC_ACK_LSB               (1U << 1)       /* 1b */
-
-/* MISC_STA (0x10006000+0x1D4) */
-#define MM_DVFS_HALT_AF_MASK_LSB            (1U << 0)       /* 5b */
-
-/* MCU_PWR_CON (0x10006000+0x200) */
-#define MCU_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define MCU_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define MCU_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define MCU_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define MCU_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define MCU_SRAM_CKISO_LSB                  (1U << 5)       /* 1b */
-#define MCU_SRAM_ISOINT_B_LSB               (1U << 6)       /* 1b */
-#define MCU_SRAM_PD_SLPB_CLAMP_LSB          (1U << 7)       /* 1b */
-#define MCU_SRAM_PDN_LSB                    (1U << 8)       /* 1b */
-#define MCU_SRAM_SLEEP_B_LSB                (1U << 12)      /* 1b */
-#define SC_MCU_SRAM_PDN_ACK_LSB             (1U << 24)      /* 1b */
-#define SC_MCU_SRAM_SLEEP_B_ACK_LSB         (1U << 28)      /* 1b */
-
-/* MP0_CPUTOP_PWR_CON (0x10006000+0x204) */
-#define MP0_CPUTOP_PWR_RST_B_LSB            (1U << 0)       /* 1b */
-#define MP0_CPUTOP_PWR_ISO_LSB              (1U << 1)       /* 1b */
-#define MP0_CPUTOP_PWR_ON_LSB               (1U << 2)       /* 1b */
-#define MP0_CPUTOP_PWR_ON_2ND_LSB           (1U << 3)       /* 1b */
-#define MP0_CPUTOP_PWR_CLK_DIS_LSB          (1U << 4)       /* 1b */
-#define MP0_CPUTOP_SRAM_CKISO_LSB           (1U << 5)       /* 1b */
-#define MP0_CPUTOP_SRAM_ISOINT_B_LSB        (1U << 6)       /* 1b */
-#define MP0_CPUTOP_SRAM_PD_SLPB_CLAMP_LSB   (1U << 7)       /* 1b */
-#define MP0_CPUTOP_SRAM_PDN_LSB             (1U << 8)       /* 1b */
-#define MP0_CPUTOP_SRAM_SLEEP_B_LSB         (1U << 12)      /* 1b */
-#define SC_MP0_CPUTOP_SRAM_PDN_ACK_LSB      (1U << 24)      /* 1b */
-#define SC_MP0_CPUTOP_SRAM_SLEEP_B_ACK_LSB  (1U << 28)      /* 1b */
-
-/* MP0_CPU0_PWR_CON (0x10006000+0x208) */
-#define MP0_CPU0_PWR_RST_B_LSB              (1U << 0)       /* 1b */
-#define MP0_CPU0_PWR_ISO_LSB                (1U << 1)       /* 1b */
-#define MP0_CPU0_PWR_ON_LSB                 (1U << 2)       /* 1b */
-#define MP0_CPU0_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
-#define MP0_CPU0_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
-#define MP0_CPU0_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
-#define MP0_CPU0_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
-#define MP0_CPU0_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
-#define MP0_CPU0_SRAM_PDN_LSB               (1U << 8)       /* 1b */
-#define MP0_CPU0_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
-#define SC_MP0_CPU0_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
-#define SC_MP0_CPU0_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
-
-/* MP0_CPU1_PWR_CON (0x10006000+0x20C) */
-#define MP0_CPU1_PWR_RST_B_LSB              (1U << 0)       /* 1b */
-#define MP0_CPU1_PWR_ISO_LSB                (1U << 1)       /* 1b */
-#define MP0_CPU1_PWR_ON_LSB                 (1U << 2)       /* 1b */
-#define MP0_CPU1_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
-#define MP0_CPU1_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
-#define MP0_CPU1_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
-#define MP0_CPU1_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
-#define MP0_CPU1_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
-#define MP0_CPU1_SRAM_PDN_LSB               (1U << 8)       /* 1b */
-#define MP0_CPU1_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
-#define SC_MP0_CPU1_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
-#define SC_MP0_CPU1_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
-
-/* MP0_CPU2_PWR_CON (0x10006000+0x210) */
-#define MP0_CPU2_PWR_RST_B_LSB              (1U << 0)       /* 1b */
-#define MP0_CPU2_PWR_ISO_LSB                (1U << 1)       /* 1b */
-#define MP0_CPU2_PWR_ON_LSB                 (1U << 2)       /* 1b */
-#define MP0_CPU2_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
-#define MP0_CPU2_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
-#define MP0_CPU2_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
-#define MP0_CPU2_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
-#define MP0_CPU2_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
-#define MP0_CPU2_SRAM_PDN_LSB               (1U << 8)       /* 1b */
-#define MP0_CPU2_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
-#define SC_MP0_CPU2_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
-#define SC_MP0_CPU2_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
-
-/* MP0_CPU3_PWR_CON (0x10006000+0x214) */
-#define MP0_CPU3_PWR_RST_B_LSB              (1U << 0)       /* 1b */
-#define MP0_CPU3_PWR_ISO_LSB                (1U << 1)       /* 1b */
-#define MP0_CPU3_PWR_ON_LSB                 (1U << 2)       /* 1b */
-#define MP0_CPU3_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
-#define MP0_CPU3_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
-#define MP0_CPU3_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
-#define MP0_CPU3_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
-#define MP0_CPU3_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
-#define MP0_CPU3_SRAM_PDN_LSB               (1U << 8)       /* 1b */
-#define MP0_CPU3_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
-#define SC_MP0_CPU3_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
-#define SC_MP0_CPU3_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
-
-/* MP1_CPUTOP_PWR_CON (0x10006000+0x218) */
-#define MP1_CPUTOP_PWR_RST_B_LSB            (1U << 0)       /* 1b */
-#define MP1_CPUTOP_PWR_ISO_LSB              (1U << 1)       /* 1b */
-#define MP1_CPUTOP_PWR_ON_LSB               (1U << 2)       /* 1b */
-#define MP1_CPUTOP_PWR_ON_2ND_LSB           (1U << 3)       /* 1b */
-#define MP1_CPUTOP_PWR_CLK_DIS_LSB          (1U << 4)       /* 1b */
-#define MP1_CPUTOP_SRAM_CKISO_LSB           (1U << 5)       /* 1b */
-#define MP1_CPUTOP_SRAM_ISOINT_B_LSB        (1U << 6)       /* 1b */
-#define MP1_CPUTOP_SRAM_PD_SLPB_CLAMP_LSB   (1U << 7)       /* 1b */
-#define MP1_CPUTOP_SRAM_PDN_LSB             (1U << 8)       /* 1b */
-#define MP1_CPUTOP_SRAM_SLEEP_B_LSB         (1U << 12)      /* 1b */
-#define SC_MP1_CPUTOP_SRAM_PDN_ACK_LSB      (1U << 24)      /* 1b */
-#define SC_MP1_CPUTOP_SRAM_SLEEP_B_ACK_LSB  (1U << 28)      /* 1b */
-
-/* MP1_CPU0_PWR_CON (0x10006000+0x21C) */
-#define MP1_CPU0_PWR_RST_B_LSB              (1U << 0)       /* 1b */
-#define MP1_CPU0_PWR_ISO_LSB                (1U << 1)       /* 1b */
-#define MP1_CPU0_PWR_ON_LSB                 (1U << 2)       /* 1b */
-#define MP1_CPU0_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
-#define MP1_CPU0_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
-#define MP1_CPU0_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
-#define MP1_CPU0_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
-#define MP1_CPU0_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
-#define MP1_CPU0_SRAM_PDN_LSB               (1U << 8)       /* 1b */
-#define MP1_CPU0_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
-#define SC_MP1_CPU0_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
-#define SC_MP1_CPU0_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
-
-/* MP1_CPU1_PWR_CON (0x10006000+0x220) */
-#define MP1_CPU1_PWR_RST_B_LSB              (1U << 0)       /* 1b */
-#define MP1_CPU1_PWR_ISO_LSB                (1U << 1)       /* 1b */
-#define MP1_CPU1_PWR_ON_LSB                 (1U << 2)       /* 1b */
-#define MP1_CPU1_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
-#define MP1_CPU1_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
-#define MP1_CPU1_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
-#define MP1_CPU1_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
-#define MP1_CPU1_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
-#define MP1_CPU1_SRAM_PDN_LSB               (1U << 8)       /* 1b */
-#define MP1_CPU1_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
-#define SC_MP1_CPU1_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
-#define SC_MP1_CPU1_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
-
-/* MP1_CPU2_PWR_CON (0x10006000+0x224) */
-#define MP1_CPU2_PWR_RST_B_LSB              (1U << 0)       /* 1b */
-#define MP1_CPU2_PWR_ISO_LSB                (1U << 1)       /* 1b */
-#define MP1_CPU2_PWR_ON_LSB                 (1U << 2)       /* 1b */
-#define MP1_CPU2_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
-#define MP1_CPU2_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
-#define MP1_CPU2_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
-#define MP1_CPU2_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
-#define MP1_CPU2_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
-#define MP1_CPU2_SRAM_PDN_LSB               (1U << 8)       /* 1b */
-#define MP1_CPU2_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
-#define SC_MP1_CPU2_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
-#define SC_MP1_CPU2_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
-
-/* MP1_CPU3_PWR_CON (0x10006000+0x228) */
-#define MP1_CPU3_PWR_RST_B_LSB              (1U << 0)       /* 1b */
-#define MP1_CPU3_PWR_ISO_LSB                (1U << 1)       /* 1b */
-#define MP1_CPU3_PWR_ON_LSB                 (1U << 2)       /* 1b */
-#define MP1_CPU3_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
-#define MP1_CPU3_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
-#define MP1_CPU3_SRAM_CKISO_LSB             (1U << 5)       /* 1b */
-#define MP1_CPU3_SRAM_ISOINT_B_LSB          (1U << 6)       /* 1b */
-#define MP1_CPU3_SRAM_PD_SLPB_CLAMP_LSB     (1U << 7)       /* 1b */
-#define MP1_CPU3_SRAM_PDN_LSB               (1U << 8)       /* 1b */
-#define MP1_CPU3_SRAM_SLEEP_B_LSB           (1U << 12)      /* 1b */
-#define SC_MP1_CPU3_SRAM_PDN_ACK_LSB        (1U << 24)      /* 1b */
-#define SC_MP1_CPU3_SRAM_SLEEP_B_ACK_LSB    (1U << 28)      /* 1b */
-
-/* MP0_CPUTOP_L2_PDN (0x10006000+0x240) */
-#define MP0_CPUTOP_L2_SRAM_PDN_LSB          (1U << 0)       /* 1b */
-#define MP0_CPUTOP_L2_SRAM_PDN_ACK_LSB      (1U << 8)       /* 1b */
-
-/* MP0_CPUTOP_L2_SLEEP_B (0x10006000+0x244) */
-#define MP0_CPUTOP_L2_SRAM_SLEEP_B_LSB      (1U << 0)       /* 1b */
-#define MP0_CPUTOP_L2_SRAM_SLEEP_B_ACK_LSB  (1U << 8)       /* 1b */
-
-/* MP0_CPU0_L1_PDN (0x10006000+0x248) */
-#define MP0_CPU0_L1_PDN_LSB                 (1U << 0)       /* 1b */
-#define MP0_CPU0_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
-
-/* MP0_CPU1_L1_PDN (0x10006000+0x24C) */
-#define MP0_CPU1_L1_PDN_LSB                 (1U << 0)       /* 1b */
-#define MP0_CPU1_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
-
-/* MP0_CPU2_L1_PDN (0x10006000+0x250) */
-#define MP0_CPU2_L1_PDN_LSB                 (1U << 0)       /* 1b */
-#define MP0_CPU2_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
-
-/* MP0_CPU3_L1_PDN (0x10006000+0x254) */
-#define MP0_CPU3_L1_PDN_LSB                 (1U << 0)       /* 1b */
-#define MP0_CPU3_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
-
-/* MP1_CPUTOP_L2_PDN (0x10006000+0x258) */
-#define MP1_CPUTOP_L2_SRAM_PDN_LSB          (1U << 0)       /* 1b */
-#define MP1_CPUTOP_L2_SRAM_PDN_ACK_LSB      (1U << 8)       /* 1b */
-
-/* MP1_CPUTOP_L2_SLEEP_B (0x10006000+0x25C) */
-#define MP1_CPUTOP_L2_SRAM_SLEEP_B_LSB      (1U << 0)       /* 1b */
-#define MP1_CPUTOP_L2_SRAM_SLEEP_B_ACK_LSB  (1U << 8)       /* 1b */
-
-/* MP1_CPU0_L1_PDN (0x10006000+0x260) */
-#define MP1_CPU0_L1_PDN_LSB                 (1U << 0)       /* 1b */
-#define MP1_CPU0_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
-
-/* MP1_CPU1_L1_PDN (0x10006000+0x264) */
-#define MP1_CPU1_L1_PDN_LSB                 (1U << 0)       /* 1b */
-#define MP1_CPU1_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
-
-/* MP1_CPU2_L1_PDN (0x10006000+0x268) */
-#define MP1_CPU2_L1_PDN_LSB                 (1U << 0)       /* 1b */
-#define MP1_CPU2_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
-
-/* MP1_CPU3_L1_PDN (0x10006000+0x26C) */
-#define MP1_CPU3_L1_PDN_LSB                 (1U << 0)       /* 1b */
-#define MP1_CPU3_L1_PDN_ACK_LSB             (1U << 8)       /* 1b */
-
-/* CPU_EXT_BUCK_ISO (0x10006000+0x290) */
-#define MP0_EXT_BUCK_ISO_LSB                (1U << 0)       /* 1b */
-#define MP1_EXT_BUCK_ISO_LSB                (1U << 1)       /* 1b */
-
-/* DUMMY1_PWR_CON (0x10006000+0x2B0) */
-#define DUMMY1_PWR_RST_B_LSB                (1U << 0)       /* 1b */
-#define DUMMY1_PWR_ISO_LSB                  (1U << 1)       /* 1b */
-#define DUMMY1_PWR_ON_LSB                   (1U << 2)       /* 1b */
-#define DUMMY1_PWR_ON_2ND_LSB               (1U << 3)       /* 1b */
-#define DUMMY1_PWR_CLK_DIS_LSB              (1U << 4)       /* 1b */
-
-/* BYPASS_SPMC (0x10006000+0x2B4) */
-#define BYPASS_CPU_SPMC_MODE_LSB            (1U << 0)       /* 1b */
-
-/* SPMC_DORMANT_ENABLE (0x10006000+0x2B8) */
-#define MP0_SPMC_SRAM_DORMANT_EN_LSB        (1U << 0)       /* 1b */
-#define MP1_SPMC_SRAM_DORMANT_EN_LSB        (1U << 1)       /* 1b */
-
-/* ARMPLL_CLK_CON (0x10006000+0x2BC) */
-#define MUXSEL_SC_CCIPLL_LSB                (1U << 0)       /* 1b */
-#define MUXSEL_SC_ARMPLL1_LSB               (1U << 1)       /* 1b */
-#define MUXSEL_SC_ARMPLL2_LSB               (1U << 2)       /* 1b */
-#define REG_SC_ARM_CLK_OFF_LSB              (1U << 8)       /* 4b */
-#define REG_SC_ARMPLL_OFF_LSB               (1U << 12)      /* 4b */
-#define REG_SC_ARMPLLOUT_OFF_LSB            (1U << 16)      /* 4b */
-#define REG_SC_FHC_PAUSE_LSB                (1U << 20)      /* 4b */
-#define REG_SC_ARMPLL_S_OFF_LSB             (1U << 24)      /* 4b */
-
-/* SPMC_IN_RET (0x10006000+0x2C0) */
-#define SPMC_STATUS_LSB                     (1U << 0)       /* 8b */
-
-/* VDE_PWR_CON (0x10006000+0x300) */
-#define VDE_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define VDE_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define VDE_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define VDE_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define VDE_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define VDE_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
-#define VDE_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
-
-/* VEN_PWR_CON (0x10006000+0x304) */
-#define VEN_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define VEN_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define VEN_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define VEN_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define VEN_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define VEN_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
-#define VEN_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
-
-/* ISP_PWR_CON (0x10006000+0x308) */
-#define ISP_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define ISP_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define ISP_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define ISP_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define ISP_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define ISP_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
-#define ISP_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
-
-/* DIS_PWR_CON (0x10006000+0x30C) */
-#define DIS_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define DIS_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define DIS_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define DIS_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define DIS_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define DIS_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
-#define DIS_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
-
-/* MJC_PWR_CON (0x10006000+0x310) */
-#define MJC_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define MJC_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define MJC_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define MJC_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define MJC_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define MJC_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
-#define MJC_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
-
-/* AUDIO_PWR_CON (0x10006000+0x314) */
-#define AUD_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define AUD_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define AUD_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define AUD_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define AUD_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define AUD_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
-#define AUD_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
-
-/* IFR_PWR_CON (0x10006000+0x318) */
-#define IFR_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define IFR_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define IFR_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define IFR_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define IFR_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define IFR_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
-#define IFR_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
-
-/* DPY_PWR_CON (0x10006000+0x31C) */
-#define DPY_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define DPY_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define DPY_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define DPY_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define DPY_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define DPY_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
-#define DPY_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
-
-/* MD1_PWR_CON (0x10006000+0x320) */
-#define MD1_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define MD1_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define MD1_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define MD1_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define MD1_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define MD1_SRAM_PDN_LSB                    (1U << 8)       /* 1b */
-
-/* MD2_PWR_CON (0x10006000+0x324) */
-#define MD2_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define MD2_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define MD2_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define MD2_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define MD2_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define MD2_SRAM_PDN_LSB                    (1U << 8)       /* 1b */
-
-/* C2K_PWR_CON (0x10006000+0x328) */
-#define C2K_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define C2K_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define C2K_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define C2K_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define C2K_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-
-/* CONN_PWR_CON (0x10006000+0x32C) */
-#define CONN_PWR_RST_B_LSB                  (1U << 0)       /* 1b */
-#define CONN_PWR_ISO_LSB                    (1U << 1)       /* 1b */
-#define CONN_PWR_ON_LSB                     (1U << 2)       /* 1b */
-#define CONN_PWR_ON_2ND_LSB                 (1U << 3)       /* 1b */
-#define CONN_PWR_CLK_DIS_LSB                (1U << 4)       /* 1b */
-#define CONN_SRAM_PDN_LSB                   (1U << 8)       /* 1b */
-#define CONN_SRAM_PDN_ACK_LSB               (1U << 12)      /* 1b */
-
-/* VCOREPDN_PWR_CON (0x10006000+0x330) */
-#define VCOREPDN_PWR_RST_B_LSB              (1U << 0)       /* 1b */
-#define VCOREPDN_PWR_ISO_LSB                (1U << 1)       /* 1b */
-#define VCOREPDN_PWR_ON_LSB                 (1U << 2)       /* 1b */
-#define VCOREPDN_PWR_ON_2ND_LSB             (1U << 3)       /* 1b */
-#define VCOREPDN_PWR_CLK_DIS_LSB            (1U << 4)       /* 1b */
-
-/* MFG_ASYNC_PWR_CON (0x10006000+0x334) */
-#define MFG_ASYNC_PWR_RST_B_LSB             (1U << 0)       /* 1b */
-#define MFG_ASYNC_PWR_ISO_LSB               (1U << 1)       /* 1b */
-#define MFG_ASYNC_PWR_ON_LSB                (1U << 2)       /* 1b */
-#define MFG_ASYNC_PWR_ON_2ND_LSB            (1U << 3)       /* 1b */
-#define MFG_ASYNC_PWR_CLK_DIS_LSB           (1U << 4)       /* 1b */
-#define MFG_ASYNC_SRAM_PDN_LSB              (1U << 8)       /* 4b */
-#define MFG_ASYNC_SRAM_PDN_ACK_LSB          (1U << 12)      /* 4b */
-
-/* MFG_PWR_CON (0x10006000+0x338) */
-#define MFG_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define MFG_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define MFG_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define MFG_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define MFG_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define MFG_SRAM_PDN_LSB                    (1U << 8)       /* 6b */
-#define MFG_SRAM_PDN_ACK_LSB                (1U << 16)      /* 6b */
-
-/* MFG_CORE0_PWR_CON (0x10006000+0x33C) */
-#define MFG_CORE0_PWR_RST_B_LSB             (1U << 0)       /* 1b */
-#define MFG_CORE0_PWR_ISO_LSB               (1U << 1)       /* 1b */
-#define MFG_CORE0_PWR_ON_LSB                (1U << 2)       /* 1b */
-#define MFG_CORE0_ON_2ND_LSB                (1U << 3)       /* 1b */
-#define MFG_CORE0_CLK_DIS_LSB               (1U << 4)       /* 1b */
-#define MFG_CORE0_SRAM_PDN_LSB              (1U << 5)       /* 1b */
-#define MFG_CORE0_SRAM_PDN_ACK_LSB          (1U << 6)       /* 1b */
-
-/* MFG_CORE1_PWR_CON (0x10006000+0x340) */
-#define MFG_CORE1_PWR_RST_B_LSB             (1U << 0)       /* 1b */
-#define MFG_CORE1_PWR_ISO_LSB               (1U << 1)       /* 1b */
-#define MFG_CORE1_PWR_ON_LSB                (1U << 2)       /* 1b */
-#define MFG_CORE1_ON_2ND_LSB                (1U << 3)       /* 1b */
-#define MFG_CORE1_CLK_DIS_LSB               (1U << 4)       /* 1b */
-#define MFG_CORE1_SRAM_PDN_LSB              (1U << 5)       /* 1b */
-#define MFG_CORE1_SRAM_PDN_ACK_LSB          (1U << 6)       /* 1b */
-
-/* CAM_PWR_CON (0x10006000+0x344) */
-#define CAM_PWR_RST_B_LSB                   (1U << 0)       /* 1b */
-#define CAM_PWR_ISO_LSB                     (1U << 1)       /* 1b */
-#define CAM_PWR_ON_LSB                      (1U << 2)       /* 1b */
-#define CAM_PWR_ON_2ND_LSB                  (1U << 3)       /* 1b */
-#define CAM_PWR_CLK_DIS_LSB                 (1U << 4)       /* 1b */
-#define CAM_SRAM_PDN_LSB                    (1U << 8)       /* 4b */
-#define CAM_SRAM_PDN_ACK_LSB                (1U << 12)      /* 4b */
-
-/* SYSRAM_CON (0x10006000+0x350) */
-#define IFR_SRAMROM_SRAM_PDN_LSB            (1U << 0)       /* 8b */
-#define IFR_SRAMROM_SRAM_CKISO_LSB          (1U << 8)       /* 8b */
-#define IFR_SRAMROM_SRAM_SLEEP_B_LSB        (1U << 16)      /* 8b */
-#define IFR_SRAMROM_SRAM_ISOINT_B_LSB       (1U << 24)      /* 8b */
-
-/* SYSROM_CON (0x10006000+0x354) */
-#define IFR_SRAMROM_ROM_PDN_LSB             (1U << 0)       /* 6b */
-
-/* SCP_SRAM_CON (0x10006000+0x358) */
-#define SCP_SRAM_PDN_LSB                    (1U << 0)       /* 1b */
-#define SCP_SRAM_SLEEP_B_LSB                (1U << 4)       /* 1b */
-#define SCP_SRAM_ISOINT_B_LSB               (1U << 8)       /* 1b */
-
-/* GCPU_SRAM_CON (0x10006000+0x35C) */
-#define GCPU_SRAM_PDN_LSB                   (1U << 0)       /* 4b */
-#define GCPU_SRAM_CKISO_LSB                 (1U << 4)       /* 4b */
-#define GCPU_SRAM_SLEEP_B_LSB               (1U << 8)       /* 4b */
-#define GCPU_SRAM_ISOINT_B_LSB              (1U << 12)      /* 4b */
-
-/* MDSYS_INTF_INFRA_PWR_CON (0x10006000+0x360) */
-#define MDSYS_INTF_INFRA_PWR_RST_B_LSB      (1U << 0)       /* 1b */
-#define MDSYS_INTF_INFRA_PWR_ISO_LSB        (1U << 1)       /* 1b */
-#define MDSYS_INTF_INFRA_PWR_ON_LSB         (1U << 2)       /* 1b */
-#define MDSYS_INTF_INFRA_PWR_ON_2ND_LSB     (1U << 3)       /* 1b */
-#define MDSYS_INTF_INFRA_PWR_CLK_DIS_LSB    (1U << 4)       /* 1b */
-
-/* MDSYS_INTF_MD1_PWR_CON (0x10006000+0x364) */
-#define MDSYS_INTF_MD1_PWR_RST_B_LSB        (1U << 0)       /* 1b */
-#define MDSYS_INTF_MD1_PWR_ISO_LSB          (1U << 1)       /* 1b */
-#define MDSYS_INTF_MD1_PWR_ON_LSB           (1U << 2)       /* 1b */
-#define MDSYS_INTF_MD1_PWR_ON_2ND_LSB       (1U << 3)       /* 1b */
-#define MDSYS_INTF_MD1_PWR_CLK_DIS_LSB      (1U << 4)       /* 1b */
-
-/* MDSYS_INTF_C2K_PWR_CON (0x10006000+0x368) */
-#define MDSYS_INTF_C2K_PWR_RST_B_LSB        (1U << 0)       /* 1b */
-#define MDSYS_INTF_C2K_PWR_ISO_LSB          (1U << 1)       /* 1b */
-#define MDSYS_INTF_C2K_PWR_ON_LSB           (1U << 2)       /* 1b */
-#define MDSYS_INTF_C2K_PWR_ON_2ND_LSB       (1U << 3)       /* 1b */
-#define MDSYS_INTF_C2K_PWR_CLK_DIS_LSB      (1U << 4)       /* 1b */
-
-/* BSI_TOP_SRAM_CON (0x10006000+0x370) */
-#define BSI_TOP_SRAM_PDN_LSB                (1U << 0)       /* 7b */
-#define BSI_TOP_SRAM_DSLP_LSB               (1U << 7)       /* 7b */
-#define BSI_TOP_SRAM_SLEEP_B_LSB            (1U << 14)      /* 7b */
-#define BSI_TOP_SRAM_ISOINT_B_LSB           (1U << 21)      /* 7b */
-#define BSI_TOP_SRAM_ISO_EN_LSB             (1U << 28)      /* 2b */
-
-/* DVFSP_SRAM_CON (0x10006000+0x374) */
-#define DVFSP_SRAM_PDN_LSB                  (1U << 0)       /* 2b */
-#define DVFSP_SRAM_SLEEP_B_LSB              (1U << 4)       /* 2b */
-#define DVFSP_SRAM_ISOINT_B_LSB             (1U << 8)       /* 2b */
-
-/* MD_EXT_BUCK_ISO (0x10006000+0x390) */
-#define MD_EXT_BUCK_ISO_LSB                 (1U << 0)       /* 1b */
-
-/* DUMMY2_PWR_CON (0x10006000+0x3B0) */
-#define DUMMY2_PWR_RST_B_LSB                (1U << 0)       /* 1b */
-#define DUMMY2_PWR_ISO_LSB                  (1U << 1)       /* 1b */
-#define DUMMY2_PWR_ON_LSB                   (1U << 2)       /* 1b */
-#define DUMMY2_PWR_ON_2ND_LSB               (1U << 3)       /* 1b */
-#define DUMMY2_PWR_CLK_DIS_LSB              (1U << 4)       /* 1b */
-#define DUMMY2_SRAM_PDN_LSB                 (1U << 8)       /* 4b */
-#define DUMMY2_SRAM_PDN_ACK_LSB             (1U << 12)      /* 4b */
-
-/* MD1_OUTPUT_PISO_S_EN_IZ (0x10006000+0x3B4) */
-#define MD1_OUTPUT_PISO_S_EN_IZ_LSB         (1U << 0)       /* 1b */
-
-/* SPM_DVFS_CON (0x10006000+0x400) */
-#define SPM_DVFS_CON_LSB                    (1U << 0)       /* 4b */
-#define SPM_DVFS_ACK_LSB                    (1U << 30)      /* 2b */
-
-/* SPM_MDBSI_CON (0x10006000+0x404) */
-#define SPM_MDBSI_CON_LSB                   (1U << 0)       /* 3b */
-
-/* SPM_MAS_PAUSE_MASK_B (0x10006000+0x408) */
-#define SPM_MAS_PAUSE_MASK_B_LSB            (1U << 0)       /* 32b */
-
-/* SPM_MAS_PAUSE2_MASK_B (0x10006000+0x40C) */
-#define SPM_MAS_PAUSE2_MASK_B_LSB           (1U << 0)       /* 32b */
-
-/* SPM_BSI_GEN (0x10006000+0x410) */
-#define SPM_BSI_START_LSB                   (1U << 0)       /* 1b */
-
-/* SPM_BSI_EN_SR (0x10006000+0x414) */
-#define SPM_BSI_EN_SR_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_BSI_CLK_SR (0x10006000+0x418) */
-#define SPM_BSI_CLK_SR_LSB                  (1U << 0)       /* 32b */
-
-/* SPM_BSI_D0_SR (0x10006000+0x41C) */
-#define SPM_BSI_D0_SR_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_BSI_D1_SR (0x10006000+0x420) */
-#define SPM_BSI_D1_SR_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_BSI_D2_SR (0x10006000+0x424) */
-#define SPM_BSI_D2_SR_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_AP_SEMA (0x10006000+0x428) */
-#define SPM_AP_SEMA_LSB                     (1U << 0)       /* 1b */
-
-/* SPM_SPM_SEMA (0x10006000+0x42C) */
-#define SPM_SPM_SEMA_LSB                    (1U << 0)       /* 1b */
-
-/* AP2MD_CROSS_TRIGGER (0x10006000+0x430) */
-#define AP2MD_CROSS_TRIGGER_REQ_LSB         (1U << 0)       /* 1b */
-#define AP2MD_CROSS_TRIGGER_ACK_LSB         (1U << 1)       /* 1b */
-
-/* AP_MDSRC_REQ (0x10006000+0x434) */
-#define AP_MD1SRC_REQ_LSB                   (1U << 0)       /* 1b */
-#define AP_MD2SRC_REQ_LSB                   (1U << 1)       /* 1b */
-#define AP_MD1SRC_ACK_LSB                   (1U << 4)       /* 1b */
-#define AP_MD2SRC_ACK_LSB                   (1U << 5)       /* 1b */
-
-/* SPM2MD_DVFS_CON (0x10006000+0x438) */
-#define SPM2MD_DVFS_CON_LSB                 (1U << 0)       /* 16b */
-
-/* MD2SPM_DVFS_CON (0x10006000+0x43C) */
-#define MD2SPM_DVFS_CON_LSB                 (1U << 0)       /* 16b */
-
-/* DRAMC_DPY_CLK_SW_CON_RSV (0x10006000+0x440) */
-#define SPM2DRAMC_SHUFFLE_START_LSB         (1U << 0)       /* 1b */
-#define SPM2DRAMC_SHUFFLE_SWITCH_LSB        (1U << 1)       /* 1b */
-#define SPM2DPY_DIV2_SYNC_LSB               (1U << 2)       /* 1b */
-#define SPM2DPY_1PLL_SWITCH_LSB             (1U << 3)       /* 1b */
-#define SPM2DPY_TEST_CK_MUX_LSB             (1U << 4)       /* 1b */
-#define SPM2DPY_ASYNC_MODE_LSB              (1U << 5)       /* 1b */
-#define SPM2TOP_ASYNC_MODE_LSB              (1U << 6)       /* 1b */
-
-/* DPY_LP_CON (0x10006000+0x444) */
-#define SC_DDRPHY_LP_SIGNALS_LSB            (1U << 0)       /* 3b */
-
-/* CPU_DVFS_REQ (0x10006000+0x448) */
-#define CPU_DVFS_REQ_LSB                    (1U << 0)       /* 16b */
-#define DVFS_HALT_LSB                       (1U << 16)      /* 1b */
-#define MD_DVFS_ERROR_STATUS_LSB            (1U << 17)      /* 1b */
-
-/* SPM_PLL_CON (0x10006000+0x44C) */
-#define SC_MPLLOUT_OFF_LSB                  (1U << 0)       /* 1b */
-#define SC_UNIPLLOUT_OFF_LSB                (1U << 1)       /* 1b */
-#define SC_MPLL_OFF_LSB                     (1U << 4)       /* 1b */
-#define SC_UNIPLL_OFF_LSB                   (1U << 5)       /* 1b */
-#define SC_MPLL_S_OFF_LSB                   (1U << 8)       /* 1b */
-#define SC_UNIPLL_S_OFF_LSB                 (1U << 9)       /* 1b */
-#define SC_SMI_CK_OFF_LSB                   (1U << 16)      /* 1b */
-#define SC_MD32K_CK_OFF_LSB                 (1U << 17)      /* 1b */
-
-/* SPM_EMI_BW_MODE (0x10006000+0x450) */
-#define EMI_BW_MODE_LSB                     (1U << 0)       /* 1b */
-#define EMI_BOOST_MODE_LSB                  (1U << 1)       /* 1b */
-
-/* AP2MD_PEER_WAKEUP (0x10006000+0x454) */
-#define AP2MD_PEER_WAKEUP_LSB               (1U << 0)       /* 1b */
-
-/* ULPOSC_CON (0x10006000+0x458) */
-#define ULPOSC_EN_LSB                       (1U << 0)       /* 1b */
-#define ULPOSC_RST_LSB                      (1U << 1)       /* 1b */
-#define ULPOSC_CG_EN_LSB                    (1U << 2)       /* 1b */
-
-/* DRAMC_DPY_CLK_SW_CON_SEL (0x10006000+0x460) */
-#define SW_DR_GATE_RETRY_EN_SEL_LSB         (1U << 0)       /* 2b */
-#define SW_EMI_CLK_OFF_SEL_LSB              (1U << 2)       /* 2b */
-#define SW_DPY_MODE_SW_SEL_LSB              (1U << 4)       /* 2b */
-#define SW_DMSUS_OFF_SEL_LSB                (1U << 6)       /* 2b */
-#define SW_MEM_CK_OFF_SEL_LSB               (1U << 8)       /* 2b */
-#define SW_DPY_2ND_DLL_EN_SEL_LSB           (1U << 10)      /* 2b */
-#define SW_DPY_DLL_EN_SEL_LSB               (1U << 12)      /* 2b */
-#define SW_DPY_DLL_CK_EN_SEL_LSB            (1U << 14)      /* 2b */
-#define SW_DPY_VREF_EN_SEL_LSB              (1U << 16)      /* 2b */
-#define SW_PHYPLL_EN_SEL_LSB                (1U << 18)      /* 2b */
-#define SW_DDRPHY_FB_CK_EN_SEL_LSB          (1U << 20)      /* 2b */
-#define SEPERATE_PHY_PWR_SEL_LSB            (1U << 23)      /* 1b */
-#define SW_DMDRAMCSHU_ACK_SEL_LSB           (1U << 24)      /* 2b */
-#define SW_EMI_CLK_OFF_ACK_SEL_LSB          (1U << 26)      /* 2b */
-#define SW_DR_SHORT_QUEUE_ACK_SEL_LSB       (1U << 28)      /* 2b */
-#define SW_DRAMC_DFS_STA_SEL_LSB            (1U << 30)      /* 2b */
-
-/* DRAMC_DPY_CLK_SW_CON (0x10006000+0x464) */
-#define SW_DR_GATE_RETRY_EN_LSB             (1U << 0)       /* 2b */
-#define SW_EMI_CLK_OFF_LSB                  (1U << 2)       /* 2b */
-#define SW_DPY_MODE_SW_LSB                  (1U << 4)       /* 2b */
-#define SW_DMSUS_OFF_LSB                    (1U << 6)       /* 2b */
-#define SW_MEM_CK_OFF_LSB                   (1U << 8)       /* 2b */
-#define SW_DPY_2ND_DLL_EN_LSB               (1U << 10)      /* 2b */
-#define SW_DPY_DLL_EN_LSB                   (1U << 12)      /* 2b */
-#define SW_DPY_DLL_CK_EN_LSB                (1U << 14)      /* 2b */
-#define SW_DPY_VREF_EN_LSB                  (1U << 16)      /* 2b */
-#define SW_PHYPLL_EN_LSB                    (1U << 18)      /* 2b */
-#define SW_DDRPHY_FB_CK_EN_LSB              (1U << 20)      /* 2b */
-#define SC_DR_SHU_EN_ACK_LSB                (1U << 24)      /* 2b */
-#define EMI_CLK_OFF_ACK_LSB                 (1U << 26)      /* 2b */
-#define SC_DR_SHORT_QUEUE_ACK_LSB           (1U << 28)      /* 2b */
-#define SC_DRAMC_DFS_STA_LSB                (1U << 30)      /* 2b */
-
-/* DRAMC_DPY_CLK_SW_CON_SEL2 (0x10006000+0x470) */
-#define SW_PHYPLL_SHU_EN_SEL_LSB            (1U << 0)       /* 1b */
-#define SW_PHYPLL2_SHU_EN_SEL_LSB           (1U << 1)       /* 1b */
-#define SW_PHYPLL_MODE_SW_SEL_LSB           (1U << 2)       /* 1b */
-#define SW_PHYPLL2_MODE_SW_SEL_LSB          (1U << 3)       /* 1b */
-#define SW_DR_SHORT_QUEUE_SEL_LSB           (1U << 4)       /* 1b */
-#define SW_DR_SHU_EN_SEL_LSB                (1U << 5)       /* 1b */
-#define SW_DR_SHU_LEVEL_SEL_LSB             (1U << 6)       /* 1b */
-
-/* DRAMC_DPY_CLK_SW_CON2 (0x10006000+0x474) */
-#define SW_PHYPLL_SHU_EN_LSB                (1U << 0)       /* 1b */
-#define SW_PHYPLL2_SHU_EN_LSB               (1U << 1)       /* 1b */
-#define SW_PHYPLL_MODE_SW_LSB               (1U << 2)       /* 1b */
-#define SW_PHYPLL2_MODE_SW_LSB              (1U << 3)       /* 1b */
-#define SW_DR_SHORT_QUEUE_LSB               (1U << 4)       /* 1b */
-#define SW_DR_SHU_EN_LSB                    (1U << 5)       /* 1b */
-#define SW_DR_SHU_LEVEL_LSB                 (1U << 6)       /* 2b */
-#define SPM2MM_ULTRAREQ_LSB                 (1U << 8)       /* 1b */
-#define SPM2MD_ULTRAREQ_LSB                 (1U << 9)       /* 1b */
-#define SPM2MM_ULTRAACK_D2T_LSB             (1U << 30)      /* 1b */
-#define SPM2MD_ULTRAACK_D2T_LSB             (1U << 31)      /* 1b */
-
-/* SPM_SEMA_M0 (0x10006000+0x480) */
-#define SPM_SEMA_M0_LSB                     (1U << 0)       /* 8b */
-
-/* SPM_SEMA_M1 (0x10006000+0x484) */
-#define SPM_SEMA_M1_LSB                     (1U << 0)       /* 8b */
-
-/* SPM_SEMA_M2 (0x10006000+0x488) */
-#define SPM_SEMA_M2_LSB                     (1U << 0)       /* 8b */
-
-/* SPM_SEMA_M3 (0x10006000+0x48C) */
-#define SPM_SEMA_M3_LSB                     (1U << 0)       /* 8b */
-
-/* SPM_SEMA_M4 (0x10006000+0x490) */
-#define SPM_SEMA_M4_LSB                     (1U << 0)       /* 8b */
-
-/* SPM_SEMA_M5 (0x10006000+0x494) */
-#define SPM_SEMA_M5_LSB                     (1U << 0)       /* 8b */
-
-/* SPM_SEMA_M6 (0x10006000+0x498) */
-#define SPM_SEMA_M6_LSB                     (1U << 0)       /* 8b */
-
-/* SPM_SEMA_M7 (0x10006000+0x49C) */
-#define SPM_SEMA_M7_LSB                     (1U << 0)       /* 8b */
-
-/* SPM_SEMA_M8 (0x10006000+0x4A0) */
-#define SPM_SEMA_M8_LSB                     (1U << 0)       /* 8b */
-
-/* SPM_SEMA_M9 (0x10006000+0x4A4) */
-#define SPM_SEMA_M9_LSB                     (1U << 0)       /* 8b */
-
-/* SRAM_DREQ_ACK (0x10006000+0x4AC) */
-#define SRAM_DREQ_ACK_LSB                   (1U << 0)       /* 16b */
-
-/* SRAM_DREQ_CON (0x10006000+0x4B0) */
-#define SRAM_DREQ_CON_LSB                   (1U << 0)       /* 16b */
-
-/* SRAM_DREQ_CON_SET (0x10006000+0x4B4) */
-#define SRAM_DREQ_CON_SET_LSB               (1U << 0)       /* 16b */
-
-/* SRAM_DREQ_CON_CLR (0x10006000+0x4B8) */
-#define SRAM_DREQ_CON_CLR_LSB               (1U << 0)       /* 16b */
-
-/* MP0_CPU0_IRQ_MASK (0x10006000+0x500) */
-#define MP0_CPU0_IRQ_MASK_LSB               (1U << 0)       /* 1b */
-#define MP0_CPU0_AUX_LSB                    (1U << 8)       /* 11b */
-
-/* MP0_CPU1_IRQ_MASK (0x10006000+0x504) */
-#define MP0_CPU1_IRQ_MASK_LSB               (1U << 0)       /* 1b */
-#define MP0_CPU1_AUX_LSB                    (1U << 8)       /* 11b */
-
-/* MP0_CPU2_IRQ_MASK (0x10006000+0x508) */
-#define MP0_CPU2_IRQ_MASK_LSB               (1U << 0)       /* 1b */
-#define MP0_CPU2_AUX_LSB                    (1U << 8)       /* 11b */
-
-/* MP0_CPU3_IRQ_MASK (0x10006000+0x50C) */
-#define MP0_CPU3_IRQ_MASK_LSB               (1U << 0)       /* 1b */
-#define MP0_CPU3_AUX_LSB                    (1U << 8)       /* 11b */
-
-/* MP1_CPU0_IRQ_MASK (0x10006000+0x510) */
-#define MP1_CPU0_IRQ_MASK_LSB               (1U << 0)       /* 1b */
-#define MP1_CPU0_AUX_LSB                    (1U << 8)       /* 11b */
-
-/* MP1_CPU1_IRQ_MASK (0x10006000+0x514) */
-#define MP1_CPU1_IRQ_MASK_LSB               (1U << 0)       /* 1b */
-#define MP1_CPU1_AUX_LSB                    (1U << 8)       /* 11b */
-
-/* MP1_CPU2_IRQ_MASK (0x10006000+0x518) */
-#define MP1_CPU2_IRQ_MASK_LSB               (1U << 0)       /* 1b */
-#define MP1_CPU2_AUX_LSB                    (1U << 8)       /* 11b */
-
-/* MP1_CPU3_IRQ_MASK (0x10006000+0x51C) */
-#define MP1_CPU3_IRQ_MASK_LSB               (1U << 0)       /* 1b */
-#define MP1_CPU3_AUX_LSB                    (1U << 8)       /* 11b */
-
-/* MP0_CPU0_WFI_EN (0x10006000+0x530) */
-#define MP0_CPU0_WFI_EN_LSB                 (1U << 0)       /* 1b */
-
-/* MP0_CPU1_WFI_EN (0x10006000+0x534) */
-#define MP0_CPU1_WFI_EN_LSB                 (1U << 0)       /* 1b */
-
-/* MP0_CPU2_WFI_EN (0x10006000+0x538) */
-#define MP0_CPU2_WFI_EN_LSB                 (1U << 0)       /* 1b */
-
-/* MP0_CPU3_WFI_EN (0x10006000+0x53C) */
-#define MP0_CPU3_WFI_EN_LSB                 (1U << 0)       /* 1b */
-
-/* MP1_CPU0_WFI_EN (0x10006000+0x540) */
-#define MP1_CPU0_WFI_EN_LSB                 (1U << 0)       /* 1b */
-
-/* MP1_CPU1_WFI_EN (0x10006000+0x544) */
-#define MP1_CPU1_WFI_EN_LSB                 (1U << 0)       /* 1b */
-
-/* MP1_CPU2_WFI_EN (0x10006000+0x548) */
-#define MP1_CPU2_WFI_EN_LSB                 (1U << 0)       /* 1b */
-
-/* MP1_CPU3_WFI_EN (0x10006000+0x54C) */
-#define MP1_CPU3_WFI_EN_LSB                 (1U << 0)       /* 1b */
-
-/* CPU_PTPOD2_CON (0x10006000+0x560) */
-#define MP0_PTPOD2_FBB_EN_LSB               (1U << 0)       /* 1b */
-#define MP1_PTPOD2_FBB_EN_LSB               (1U << 1)       /* 1b */
-#define MP0_PTPOD2_SPARK_EN_LSB             (1U << 2)       /* 1b */
-#define MP1_PTPOD2_SPARK_EN_LSB             (1U << 3)       /* 1b */
-#define MP0_PTPOD2_FBB_ACK_LSB              (1U << 4)       /* 1b */
-#define MP1_PTPOD2_FBB_ACK_LSB              (1U << 5)       /* 1b */
-
-/* ROOT_CPUTOP_ADDR (0x10006000+0x570) */
-#define ROOT_CPUTOP_ADDR_LSB                (1U << 0)       /* 32b */
-
-/* ROOT_CORE_ADDR (0x10006000+0x574) */
-#define ROOT_CORE_ADDR_LSB                  (1U << 0)       /* 32b */
-
-/* CPU_SPARE_CON (0x10006000+0x580) */
-#define CPU_SPARE_CON_LSB                   (1U << 0)       /* 32b */
-
-/* CPU_SPARE_CON_SET (0x10006000+0x584) */
-#define CPU_SPARE_CON_SET_LSB               (1U << 0)       /* 32b */
-
-/* CPU_SPARE_CON_CLR (0x10006000+0x588) */
-#define CPU_SPARE_CON_CLR_LSB               (1U << 0)       /* 32b */
-
-/* SPM_SW_FLAG (0x10006000+0x600) */
-#define SPM_SW_FLAG_LSB                     (1U << 0)       /* 32b */
-
-/* SPM_SW_DEBUG (0x10006000+0x604) */
-#define SPM_SW_DEBUG_LSB                    (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_0 (0x10006000+0x608) */
-#define SPM_SW_RSV_0_LSB                    (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_1 (0x10006000+0x60C) */
-#define SPM_SW_RSV_1_LSB                    (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_2 (0x10006000+0x610) */
-#define SPM_SW_RSV_2_LSB                    (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_3 (0x10006000+0x614) */
-#define SPM_SW_RSV_3_LSB                    (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_4 (0x10006000+0x618) */
-#define SPM_SW_RSV_4_LSB                    (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_5 (0x10006000+0x61C) */
-#define SPM_SW_RSV_5_LSB                    (1U << 0)       /* 32b */
-
-/* SPM_RSV_CON (0x10006000+0x620) */
-#define SPM_RSV_CON_LSB                     (1U << 0)       /* 16b */
-
-/* SPM_RSV_STA (0x10006000+0x624) */
-#define SPM_RSV_STA_LSB                     (1U << 0)       /* 16b */
-
-/* SPM_PASR_DPD_0 (0x10006000+0x630) */
-#define SPM_PASR_DPD_0_LSB                  (1U << 0)       /* 32b */
-
-/* SPM_PASR_DPD_1 (0x10006000+0x634) */
-#define SPM_PASR_DPD_1_LSB                  (1U << 0)       /* 32b */
-
-/* SPM_PASR_DPD_2 (0x10006000+0x638) */
-#define SPM_PASR_DPD_2_LSB                  (1U << 0)       /* 32b */
-
-/* SPM_PASR_DPD_3 (0x10006000+0x63C) */
-#define SPM_PASR_DPD_3_LSB                  (1U << 0)       /* 32b */
-
-/* SPM_SPARE_CON (0x10006000+0x640) */
-#define SPM_SPARE_CON_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_SPARE_CON_SET (0x10006000+0x644) */
-#define SPM_SPARE_CON_SET_LSB               (1U << 0)       /* 32b */
-
-/* SPM_SPARE_CON_CLR (0x10006000+0x648) */
-#define SPM_SPARE_CON_CLR_LSB               (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_6 (0x10006000+0x64C) */
-#define SPM_SW_RSV_6_LSB                    (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_7 (0x10006000+0x650) */
-#define SPM_SW_RSV_7_LSB                    (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_8 (0x10006000+0x654) */
-#define SPM_SW_RSV_8_LSB                    (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_9 (0x10006000+0x658) */
-#define SPM_SW_RSV_9_LSB                    (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_10 (0x10006000+0x65C) */
-#define SPM_SW_RSV_10_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_11 (0x10006000+0x660) */
-#define SPM_SW_RSV_11_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_12 (0x10006000+0x664) */
-#define SPM_SW_RSV_12_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_13 (0x10006000+0x668) */
-#define SPM_SW_RSV_13_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_14 (0x10006000+0x66C) */
-#define SPM_SW_RSV_14_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_15 (0x10006000+0x670) */
-#define SPM_SW_RSV_15_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_16 (0x10006000+0x674) */
-#define SPM_SW_RSV_16_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_17 (0x10006000+0x678) */
-#define SPM_SW_RSV_17_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_18 (0x10006000+0x67C) */
-#define SPM_SW_RSV_18_LSB                   (1U << 0)       /* 32b */
-
-/* SPM_SW_RSV_19 (0x10006000+0x680) */
-#define SPM_SW_RSV_19_LSB                   (1U << 0)       /* 32b */
-
-/* SW_CRTL_EVENT (0x10006000+0x690) */
-#define SW_CRTL_EVENT_ON_LSB                (1U << 0)       /* 1b */
-
-#define SPM_PROJECT_CODE	0xb16
-
-#define SPM_REGWR_EN		(1U << 0)
-#define SPM_REGWR_CFG_KEY	(SPM_PROJECT_CODE << 16)
-
-#define SPM_CPU_PDN_DIS		(1U << 0)
-#define SPM_INFRA_PDN_DIS	(1U << 1)
-#define SPM_DDRPHY_PDN_DIS	(1U << 2)
-#define SPM_DUALVCORE_PDN_DIS	(1U << 3)
-#define SPM_PASR_DIS		(1U << 4)
-#define SPM_DPD_DIS		(1U << 5)
-#define SPM_SODI_DIS		(1U << 6)
-#define SPM_MEMPLL_RESET	(1U << 7)
-#define SPM_MAINPLL_PDN_DIS	(1U << 8)
-#define SPM_CPU_DVS_DIS		(1U << 9)
-#define SPM_CPU_DORMANT		(1U << 10)
-#define SPM_EXT_VSEL_GPIO103	(1U << 11)
-#define SPM_DDR_HIGH_SPEED	(1U << 12)
-#define SPM_OPT			(1U << 13)
-
-#define POWER_ON_VAL1_DEF	0x15820
-#define PCM_FSM_STA_DEF		0x48490
-#define PCM_END_FSM_STA_DEF	0x08490
-#define PCM_END_FSM_STA_MASK	0x3fff0
-#define PCM_HANDSHAKE_SEND1	0xbeefbeef
-
-#define PCM_WDT_TIMEOUT		(30 * 32768)
-#define PCM_TIMER_MAX		(0xffffffff - PCM_WDT_TIMEOUT)
-
-#define CON0_PCM_KICK		(1U << 0)
-#define CON0_IM_KICK		(1U << 1)
-#define CON0_IM_SLEEP_DVS	(1U << 3)
-#define CON0_PCM_SW_RESET	(1U << 15)
-#define CON0_CFG_KEY		(SPM_PROJECT_CODE << 16)
-
-#define CON1_IM_SLAVE		(1U << 0)
-#define CON1_MIF_APBEN		(1U << 3)
-#define CON1_PCM_TIMER_EN	(1U << 5)
-#define CON1_IM_NONRP_EN	(1U << 6)
-#define CON1_PCM_WDT_EN		(1U << 8)
-#define CON1_PCM_WDT_WAKE_MODE	(1U << 9)
-#define CON1_SPM_SRAM_SLP_B	(1U << 10)
-#define CON1_SPM_SRAM_ISO_B	(1U << 11)
-#define CON1_EVENT_LOCK_EN	(1U << 12)
-#define CON1_CFG_KEY		(SPM_PROJECT_CODE << 16)
-
-#define PCM_PWRIO_EN_R0		(1U << 0)
-#define PCM_PWRIO_EN_R7		(1U << 7)
-#define PCM_RF_SYNC_R0		(1U << 16)
-#define PCM_RF_SYNC_R2		(1U << 18)
-#define PCM_RF_SYNC_R6		(1U << 22)
-#define PCM_RF_SYNC_R7		(1U << 23)
-
-#define CC_SYSCLK0_EN_0		(1U << 0)
-#define CC_SYSCLK0_EN_1		(1U << 1)
-#define CC_SYSCLK1_EN_0		(1U << 2)
-#define CC_SYSCLK1_EN_1		(1U << 3)
-#define CC_SYSSETTLE_SEL	(1U << 4)
-#define CC_LOCK_INFRA_DCM	(1U << 5)
-#define CC_SRCLKENA_MASK_0	(1U << 6)
-#define CC_CXO32K_RM_EN_MD1	(1U << 9)
-#define CC_CXO32K_RM_EN_MD2	(1U << 10)
-#define CC_CLKSQ1_SEL		(1U << 12)
-#define CC_DISABLE_DORM_PWR	(1U << 14)
-#define CC_MD32_DCM_EN		(1U << 18)
-
-#define WFI_OP_AND		1
-#define WFI_OP_OR		0
-
-#define WAKE_MISC_PCM_TIMER	(1U << 19)
-#define WAKE_MISC_CPU_WAKE	(1U << 20)
-
-/* define WAKE_SRC_XXX */
-#define WAKE_SRC_SPM_MERGE	(1 << 0)
-#define WAKE_SRC_KP		(1 << 2)
-#define WAKE_SRC_WDT		(1 << 3)
-#define WAKE_SRC_GPT		(1 << 4)
-#define WAKE_SRC_EINT		(1 << 6)
-#define WAKE_SRC_LOW_BAT	(1 << 9)
-#define WAKE_SRC_MD32		(1 << 10)
-#define WAKE_SRC_USB_CD		(1 << 14)
-#define WAKE_SRC_USB_PDN	(1 << 15)
-#define WAKE_SRC_AFE		(1 << 20)
-#define WAKE_SRC_THERM		(1 << 21)
-#define WAKE_SRC_SYSPWREQ	(1 << 24)
-#define WAKE_SRC_SEJ		(1 << 27)
-#define WAKE_SRC_ALL_MD32	(1 << 28)
-#define WAKE_SRC_CPU_IRQ	(1 << 29)
-
-#define spm_read(addr)		mmio_read_32(addr)
-#define spm_write(addr, val)	mmio_write_32(addr, val)
-
-#endif /* SPM_H */
diff --git a/plat/mediatek/mt8183/include/sspm_reg.h b/plat/mediatek/mt8183/include/sspm_reg.h
new file mode 100644
index 0000000..3f1ac86
--- /dev/null
+++ b/plat/mediatek/mt8183/include/sspm_reg.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __SSPM_REG_H__
+#define __SSPM_REG_H__
+
+#include "platform_def.h"
+
+#define SSPM_CFGREG_RSV_RW_REG0        (SSPM_CFGREG_BASE + 0x0100)
+#define SSPM_CFGREG_ACAO_INT_SET       (SSPM_CFGREG_BASE + 0x00D8)
+#define SSPM_CFGREG_ACAO_INT_CLR       (SSPM_CFGREG_BASE + 0x00DC)
+#define SSPM_CFGREG_ACAO_WAKEUP_EN     (SSPM_CFGREG_BASE + 0x0204)
+
+#define STANDBYWFI_EN(n)               (1 << (n +  8))
+#define GIC_IRQOUT_EN(n)               (1 << (n +  0))
+
+#define NF_MCDI_MBOX                            19
+#define MCDI_MBOX_CLUSTER_0_CAN_POWER_OFF       0
+#define MCDI_MBOX_CLUSTER_1_CAN_POWER_OFF       1
+#define MCDI_MBOX_BUCK_POWER_OFF_MASK           2
+#define MCDI_MBOX_CLUSTER_0_ATF_ACTION_DONE     3
+#define MCDI_MBOX_CLUSTER_1_ATF_ACTION_DONE     4
+#define MCDI_MBOX_BOOTADDR                      5
+#define MCDI_MBOX_PAUSE_ACTION                  6
+#define MCDI_MBOX_AVAIL_CPU_MASK                7
+#define MCDI_MBOX_CPU_CLUSTER_PWR_STAT          8
+#define MCDI_MBOX_ACTION_STAT                   9
+#define MCDI_MBOX_CLUSTER_0_CNT                 10
+#define MCDI_MBOX_CLUSTER_1_CNT                 11
+#define MCDI_MBOX_CPU_ISOLATION_MASK            12
+#define MCDI_MBOX_PAUSE_ACK                     13
+#define MCDI_MBOX_PENDING_ON_EVENT              14
+#define MCDI_MBOX_PROF_CMD                      15
+#define MCDI_MBOX_DRCC_CALI_DONE                16
+#define MCDI_MBOX_HP_CMD                        17
+#define MCDI_MBOX_HP_ACK                        18
+
+#endif /* __SSPM_REG_H__ */
diff --git a/plat/mediatek/mt8183/plat_debug.c b/plat/mediatek/mt8183/plat_debug.c
index 51816db..2f0b67d 100644
--- a/plat/mediatek/mt8183/plat_debug.c
+++ b/plat/mediatek/mt8183/plat_debug.c
@@ -9,6 +9,7 @@
 #include <lib/mmio.h>
 #include <plat_debug.h>
 #include <platform_def.h>
+#include <spm.h>
 
 void circular_buffer_setup(void)
 {
diff --git a/plat/mediatek/mt8183/plat_pm.c b/plat/mediatek/mt8183/plat_pm.c
index 83c8d4c..555b389 100644
--- a/plat/mediatek/mt8183/plat_pm.c
+++ b/plat/mediatek/mt8183/plat_pm.c
@@ -16,6 +16,7 @@
 #include <platform_def.h>
 #include <scu.h>
 #include <mt_gic_v3.h>
+#include <mtk_mcdi.h>
 #include <mtk_plat_common.h>
 #include <mtgpio.h>
 #include <mtspmc.h>
@@ -25,9 +26,103 @@
 #include <plat_private.h>
 #include <power_tracer.h>
 #include <pmic.h>
+#include <spm.h>
+#include <spm_suspend.h>
+#include <sspm.h>
 #include <rtc.h>
 
-#define MTK_LOCAL_STATE_OFF     2
+/* Local power state for power domains in Run state. */
+#define MTK_LOCAL_STATE_RUN	0
+/* Local power state for retention. */
+#define MTK_LOCAL_STATE_RET	1
+/* Local power state for OFF/power-down. */
+#define MTK_LOCAL_STATE_OFF	2
+
+#if PSCI_EXTENDED_STATE_ID
+/*
+ * Macros used to parse state information from State-ID if it is using the
+ * recommended encoding for State-ID.
+ */
+#define MTK_LOCAL_PSTATE_WIDTH		4
+#define MTK_LOCAL_PSTATE_MASK		((1 << MTK_LOCAL_PSTATE_WIDTH) - 1)
+
+/* Macros to construct the composite power state */
+
+/* Make composite power state parameter till power level 0 */
+
+#define mtk_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
+	(((lvl0_state) << PSTATE_ID_SHIFT) | ((type) << PSTATE_TYPE_SHIFT))
+
+#else /* !PSCI_EXTENDED_STATE_ID */
+
+#define mtk_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
+		(((lvl0_state) << PSTATE_ID_SHIFT) | \
+		((pwr_lvl) << PSTATE_PWR_LVL_SHIFT) | \
+		((type) << PSTATE_TYPE_SHIFT))
+
+#endif /* PSCI_EXTENDED_STATE_ID */
+
+/* Make composite power state parameter till power level 1 */
+#define mtk_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type) \
+		(((lvl1_state) << MTK_LOCAL_PSTATE_WIDTH) | \
+		mtk_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type))
+
+/* Make composite power state parameter till power level 2 */
+#define mtk_make_pwrstate_lvl2( \
+		lvl2_state, lvl1_state, lvl0_state, pwr_lvl, type) \
+		(((lvl2_state) << (MTK_LOCAL_PSTATE_WIDTH * 2)) | \
+		mtk_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type))
+
+#define MTK_PWR_LVL0	0
+#define MTK_PWR_LVL1	1
+#define MTK_PWR_LVL2	2
+
+/* Macros to read the MTK power domain state */
+#define MTK_CORE_PWR_STATE(state)	(state)->pwr_domain_state[MTK_PWR_LVL0]
+#define MTK_CLUSTER_PWR_STATE(state)	(state)->pwr_domain_state[MTK_PWR_LVL1]
+#define MTK_SYSTEM_PWR_STATE(state)	((PLAT_MAX_PWR_LVL > MTK_PWR_LVL1) ? \
+			(state)->pwr_domain_state[MTK_PWR_LVL2] : 0)
+
+#if PSCI_EXTENDED_STATE_ID
+/*
+ *  The table storing the valid idle power states. Ensure that the
+ *  array entries are populated in ascending order of state-id to
+ *  enable us to use binary search during power state validation.
+ *  The table must be terminated by a NULL entry.
+ */
+const unsigned int mtk_pm_idle_states[] = {
+	/* State-id - 0x001 */
+	mtk_make_pwrstate_lvl2(MTK_LOCAL_STATE_RUN, MTK_LOCAL_STATE_RUN,
+		MTK_LOCAL_STATE_RET, MTK_PWR_LVL0, PSTATE_TYPE_STANDBY),
+	/* State-id - 0x002 */
+	mtk_make_pwrstate_lvl2(MTK_LOCAL_STATE_RUN, MTK_LOCAL_STATE_RUN,
+		MTK_LOCAL_STATE_OFF, MTK_PWR_LVL0, PSTATE_TYPE_POWERDOWN),
+	/* State-id - 0x022 */
+	mtk_make_pwrstate_lvl2(MTK_LOCAL_STATE_RUN, MTK_LOCAL_STATE_OFF,
+		MTK_LOCAL_STATE_OFF, MTK_PWR_LVL1, PSTATE_TYPE_POWERDOWN),
+#if PLAT_MAX_PWR_LVL > MTK_PWR_LVL1
+	/* State-id - 0x222 */
+	mtk_make_pwrstate_lvl2(MTK_LOCAL_STATE_OFF, MTK_LOCAL_STATE_OFF,
+		MTK_LOCAL_STATE_OFF, MTK_PWR_LVL2, PSTATE_TYPE_POWERDOWN),
+#endif
+	0,
+};
+#endif
+
+#define CPU_IDX(cluster, cpu)		((cluster << 2) + cpu)
+#define ON	true
+#define OFF	false
+
+/* Pause MCDI when CPU hotplug */
+static bool HP_SSPM_PAUSE;
+/* CPU Hotplug by SSPM */
+static bool HP_SSPM_CTRL = true;
+/* Turn off cluster when CPU hotplug off */
+static bool HP_CLUSTER_OFF = true;
+/* Turn off cluster when CPU MCDI off */
+static bool MCDI_C2 = true;
+/* Enable MCDI */
+static bool MCDI_SSPM = true;
 
 static uintptr_t secure_entrypoint;
 
@@ -38,30 +133,171 @@
 	dsb();
 }
 
+static bool clst_single_pwr(int cluster, int cpu)
+{
+	uint32_t cpu_mask[2] = {0x00001e00, 0x000f0000};
+	uint32_t cpu_pwr_bit[] = {9, 10, 11, 12, 16, 17, 18, 19};
+	int my_idx = (cluster << 2) + cpu;
+	uint32_t pwr_stat = mmio_read_32(0x10006180);
+
+	return !(pwr_stat & (cpu_mask[cluster] & ~BIT(cpu_pwr_bit[my_idx])));
+}
+
+static bool clst_single_on(int cluster, int cpu)
+{
+	uint32_t cpu_mask[2] = {0x0f, 0xf0};
+	int my_idx = (cluster << 2) + cpu;
+	uint32_t on_stat = mcdi_avail_cpu_mask_read();
+
+	return !(on_stat & (cpu_mask[cluster] & ~BIT(my_idx)));
+}
+
+static void plat_cluster_pwrdwn_common(uint64_t mpidr, int cluster)
+{
+	if (cluster > 0)
+		mt_gic_sync_dcm_enable();
+
+	/* Disable coherency */
+	plat_mtk_cci_disable();
+	disable_scu(mpidr);
+}
+
+static void plat_cluster_pwron_common(uint64_t mpidr, int cluster)
+{
+	if (cluster > 0) {
+		l2c_parity_check_setup();
+		circular_buffer_setup();
+		mp1_L2_desel_config();
+		mt_gic_sync_dcm_disable();
+	}
+
+	/* Enable coherency */
+	enable_scu(mpidr);
+	plat_mtk_cci_enable();
+	/* Enable big core dcm */
+	plat_dcm_restore_cluster_on(mpidr);
+	/* Enable rgu dcm */
+	plat_dcm_rgu_enable();
+}
+
+static void plat_cpu_standby(plat_local_state_t cpu_state)
+{
+	unsigned int scr;
+
+	scr = read_scr_el3();
+	write_scr_el3(scr | SCR_IRQ_BIT | SCR_FIQ_BIT);
+
+	isb();
+	dsb();
+	wfi();
+
+	write_scr_el3(scr);
+}
+
+static void mcdi_ctrl_before_hotplug_on(int cluster, int cpu)
+{
+	if (!HP_SSPM_CTRL && HP_SSPM_PAUSE && MCDI_SSPM) {
+		mcdi_pause_clr(cluster, CPU_IDX(cluster, cpu), OFF);
+		mcdi_pause_set(cluster, CPU_IDX(cluster, cpu), ON);
+	}
+}
+
+static void mcdi_ctrl_before_hotplug_off(int cluster, int cpu, bool cluster_off)
+{
+	if (!HP_SSPM_CTRL && HP_SSPM_PAUSE && MCDI_SSPM)
+		mcdi_pause_set(cluster_off ? cluster : -1,
+				CPU_IDX(cluster, cpu), OFF);
+}
+
+static void mcdi_ctrl_cluster_cpu_off(int cluster, int cpu, bool cluster_off)
+{
+	if (MCDI_SSPM) {
+		sspm_set_bootaddr(secure_entrypoint);
+
+		sspm_standbywfi_irq_enable(CPU_IDX(cluster, cpu));
+
+		if (cluster_off)
+			sspm_cluster_pwr_off_notify(cluster);
+		else
+			sspm_cluster_pwr_on_notify(cluster);
+	}
+}
+
+static void mcdi_ctrl_suspend(void)
+{
+	if (MCDI_SSPM)
+		mcdi_pause();
+}
+
+static void mcdi_ctrl_resume(void)
+{
+	if (MCDI_SSPM)
+		mcdi_unpause();
+}
+
+static void hotplug_ctrl_cluster_on(int cluster, int cpu)
+{
+	if (HP_SSPM_CTRL && MCDI_SSPM) {
+		mcdi_hotplug_clr(cluster, CPU_IDX(cluster, cpu), OFF);
+		mcdi_hotplug_set(cluster, -1, ON);
+		mcdi_hotplug_wait_ack(cluster, -1, ON);
+	} else {
+		/* power on cluster */
+		if (!spm_get_cluster_powerstate(cluster))
+			spm_poweron_cluster(cluster);
+	}
+}
+
+static void hotplug_ctrl_cpu_on(int cluster, int cpu)
+{
+	if (HP_SSPM_CTRL && MCDI_SSPM)
+		mcdi_hotplug_set(cluster, CPU_IDX(cluster, cpu), ON);
+	else
+		spm_poweron_cpu(cluster, cpu);
+}
+
+static void hotplug_ctrl_cpu_on_finish(int cluster, int cpu)
+{
+	spm_disable_cpu_auto_off(cluster, cpu);
+
+	if (HP_SSPM_CTRL && MCDI_SSPM)
+		mcdi_hotplug_clr(cluster, CPU_IDX(cluster, cpu), ON);
+	else if (HP_SSPM_PAUSE && MCDI_SSPM)
+		mcdi_pause_clr(cluster, CPU_IDX(cluster, cpu), ON);
+
+	mcdi_avail_cpu_mask_set(BIT(CPU_IDX(cluster, cpu)));
+}
+
+static void hotplug_ctrl_cluster_cpu_off(int cluster, int cpu, bool cluster_off)
+{
+	mcdi_avail_cpu_mask_clr(BIT(CPU_IDX(cluster, cpu)));
+
+	if (HP_SSPM_CTRL && MCDI_SSPM) {
+		mcdi_hotplug_set(cluster_off ? cluster : -1,
+				CPU_IDX(cluster, cpu), OFF);
+	} else {
+		spm_enable_cpu_auto_off(cluster, cpu);
+
+		if (cluster_off)
+			spm_enable_cluster_auto_off(cluster);
+
+		spm_set_cpu_power_off(cluster, cpu);
+	}
+}
+
 static int plat_mtk_power_domain_on(unsigned long mpidr)
 {
 	int cpu = MPIDR_AFFLVL0_VAL(mpidr);
 	int cluster = MPIDR_AFFLVL1_VAL(mpidr);
 
-	INFO("%s():%d: mpidr: %lx, c.c: %d.%d\n",
-		__func__, __LINE__, mpidr, cluster, cpu);
-
-	/* power on cluster */
-	if (!spm_get_cluster_powerstate(cluster)) {
-		spm_poweron_cluster(cluster);
-		if (cluster == 1) {
-			l2c_parity_check_setup();
-			circular_buffer_setup();
-			mp1_L2_desel_config();
-			mt_gic_sync_dcm_disable();
-		}
-	}
+	mcdi_ctrl_before_hotplug_on(cluster, cpu);
+	hotplug_ctrl_cluster_on(cluster, cpu);
 
 	/* init cpu reset arch as AARCH64 */
 	mcucfg_init_archstate(cluster, cpu, 1);
 	mcucfg_set_bootaddr(cluster, cpu, secure_entrypoint);
 
-	spm_poweron_cpu(cluster, cpu);
+	hotplug_ctrl_cpu_on(cluster, cpu);
 
 	return PSCI_E_SUCCESS;
 }
@@ -71,23 +307,18 @@
 	uint64_t mpidr = read_mpidr();
 	int cpu = MPIDR_AFFLVL0_VAL(mpidr);
 	int cluster = MPIDR_AFFLVL1_VAL(mpidr);
+	const plat_local_state_t *pds = state->pwr_domain_state;
+	bool afflvl1 = (pds[MPIDR_AFFLVL1] == MTK_LOCAL_STATE_OFF);
+	bool cluster_off = (HP_CLUSTER_OFF && afflvl1 &&
+					clst_single_on(cluster, cpu));
 
-	INFO("%s():%d: c.c: %d.%d\n", __func__, __LINE__, cluster, cpu);
-
-	/* Prevent interrupts from spuriously waking up this cpu */
 	mt_gic_cpuif_disable();
 
-	spm_enable_cpu_auto_off(cluster, cpu);
+	if (cluster_off)
+		plat_cluster_pwrdwn_common(mpidr, cluster);
 
-	if (state->pwr_domain_state[MPIDR_AFFLVL1] == MTK_LOCAL_STATE_OFF) {
-		if (cluster == 1)
-			mt_gic_sync_dcm_enable();
-
-		plat_mtk_cci_disable();
-		spm_enable_cluster_auto_off(cluster);
-	}
-
-	spm_set_cpu_power_off(cluster, cpu);
+	mcdi_ctrl_before_hotplug_off(cluster, cpu, cluster_off);
+	hotplug_ctrl_cluster_cpu_off(cluster, cpu, cluster_off);
 }
 
 static void plat_mtk_power_domain_on_finish(const psci_power_state_t *state)
@@ -95,29 +326,170 @@
 	uint64_t mpidr = read_mpidr();
 	int cpu = MPIDR_AFFLVL0_VAL(mpidr);
 	int cluster = MPIDR_AFFLVL1_VAL(mpidr);
+	const plat_local_state_t *pds = state->pwr_domain_state;
+	bool afflvl1 = (pds[MPIDR_AFFLVL1] == MTK_LOCAL_STATE_OFF);
 
-	INFO("%s():%d: c.c: %d.%d\n", __func__, __LINE__, cluster, cpu);
+	if (afflvl1)
+		plat_cluster_pwron_common(mpidr, cluster);
 
-	assert(state->pwr_domain_state[MPIDR_AFFLVL0] == MTK_LOCAL_STATE_OFF);
-
-	if (state->pwr_domain_state[MPIDR_AFFLVL1] == MTK_LOCAL_STATE_OFF) {
-		enable_scu(mpidr);
-
-		/* Enable coherency if this cluster was off */
-		plat_mtk_cci_enable();
-		/* Enable big core dcm if this cluster was on */
-		plat_dcm_restore_cluster_on(mpidr);
-		/* Enable rgu dcm if this cluster was off */
-		plat_dcm_rgu_enable();
-	}
-
-	spm_disable_cpu_auto_off(cluster, cpu);
-
-	/* Enable the gic cpu interface */
 	mt_gic_pcpu_init();
 	mt_gic_cpuif_enable();
+
+	hotplug_ctrl_cpu_on_finish(cluster, cpu);
 }
 
+static void plat_mtk_power_domain_suspend(const psci_power_state_t *state)
+{
+	uint64_t mpidr = read_mpidr();
+	int cpu = MPIDR_AFFLVL0_VAL(mpidr);
+	int cluster = MPIDR_AFFLVL1_VAL(mpidr);
+	const plat_local_state_t *pds = state->pwr_domain_state;
+	bool afflvl1 = (pds[MPIDR_AFFLVL1] == MTK_LOCAL_STATE_OFF);
+	bool afflvl2 = (pds[MPIDR_AFFLVL2] == MTK_LOCAL_STATE_OFF);
+	bool cluster_off = MCDI_C2 && afflvl1 && clst_single_pwr(cluster, cpu);
+
+	/* init cpu reset arch as AARCH64 */
+	mcucfg_init_archstate(cluster, cpu, 1);
+	mcucfg_set_bootaddr(cluster, cpu, secure_entrypoint);
+
+	mt_gic_cpuif_disable();
+	mt_gic_irq_save();
+	plat_dcm_mcsi_a_backup();
+
+	if (cluster_off || afflvl2)
+		plat_cluster_pwrdwn_common(mpidr, cluster);
+
+	if (afflvl2) {
+		spm_data_t spm_d = { .cmd = SPM_SUSPEND };
+		uint32_t *d = (uint32_t *)&spm_d;
+		uint32_t l = sizeof(spm_d) / sizeof(uint32_t);
+
+		mcdi_ctrl_suspend();
+
+		spm_set_bootaddr(secure_entrypoint);
+
+		if (MCDI_SSPM)
+			sspm_ipi_send_non_blocking(IPI_ID_SUSPEND, d);
+
+		spm_system_suspend();
+
+		if (MCDI_SSPM)
+			while (sspm_ipi_recv_non_blocking(IPI_ID_SUSPEND, d, l))
+				;
+	} else {
+		mcdi_ctrl_cluster_cpu_off(cluster, cpu, cluster_off);
+	}
+}
+
+static void plat_mtk_power_domain_suspend_finish(const psci_power_state_t *state)
+{
+	uint64_t mpidr = read_mpidr();
+	int cluster = MPIDR_AFFLVL1_VAL(mpidr);
+	const plat_local_state_t *pds = state->pwr_domain_state;
+	bool afflvl2 = (pds[MPIDR_AFFLVL2] == MTK_LOCAL_STATE_OFF);
+
+	if (afflvl2) {
+		spm_data_t spm_d = { .cmd = SPM_RESUME };
+		uint32_t *d = (uint32_t *)&spm_d;
+		uint32_t l = sizeof(spm_d) / sizeof(uint32_t);
+
+		mt_gic_init();
+		mt_gic_irq_restore();
+		mmio_write_32(EMI_WFIFO, 0xf);
+
+		if (MCDI_SSPM)
+			sspm_ipi_send_non_blocking(IPI_ID_SUSPEND, d);
+
+		spm_system_suspend_finish();
+
+		if (MCDI_SSPM)
+			while (sspm_ipi_recv_non_blocking(IPI_ID_SUSPEND, d, l))
+				;
+
+		mcdi_ctrl_resume();
+	}
+
+	plat_cluster_pwron_common(mpidr, cluster);
+
+	plat_dcm_mcsi_a_restore();
+}
+
+#if PSCI_EXTENDED_STATE_ID
+
+static int plat_mtk_validate_power_state(unsigned int power_state,
+				psci_power_state_t *req_state)
+{
+	unsigned int state_id;
+	int i;
+
+	assert(req_state);
+
+	if (!MCDI_SSPM)
+		return PSCI_E_INVALID_PARAMS;
+
+	/*
+	 *  Currently we are using a linear search for finding the matching
+	 *  entry in the idle power state array. This can be made a binary
+	 *  search if the number of entries justify the additional complexity.
+	 */
+	for (i = 0; !!mtk_pm_idle_states[i]; i++) {
+		if (power_state == mtk_pm_idle_states[i])
+			break;
+	}
+
+	/* Return error if entry not found in the idle state array */
+	if (!mtk_pm_idle_states[i])
+		return PSCI_E_INVALID_PARAMS;
+
+	i = 0;
+	state_id = psci_get_pstate_id(power_state);
+
+	/* Parse the State ID and populate the state info parameter */
+	while (state_id) {
+		req_state->pwr_domain_state[i++] = state_id &
+						MTK_LOCAL_PSTATE_MASK;
+		state_id >>= MTK_LOCAL_PSTATE_WIDTH;
+	}
+
+	return PSCI_E_SUCCESS;
+}
+
+#else /* if !PSCI_EXTENDED_STATE_ID */
+
+static int plat_mtk_validate_power_state(unsigned int power_state,
+					psci_power_state_t *req_state)
+{
+	int pstate = psci_get_pstate_type(power_state);
+	int pwr_lvl = psci_get_pstate_pwrlvl(power_state);
+	int i;
+
+	assert(req_state);
+
+	if (pwr_lvl > PLAT_MAX_PWR_LVL)
+		return PSCI_E_INVALID_PARAMS;
+
+	/* Sanity check the requested state */
+	if (pstate == PSTATE_TYPE_STANDBY) {
+		/*
+		 * It's possible to enter standby only on power level 0
+		 * Ignore any other power level.
+		 */
+		if (pwr_lvl != 0)
+			return PSCI_E_INVALID_PARAMS;
+
+		req_state->pwr_domain_state[MTK_PWR_LVL0] = MTK_LOCAL_STATE_RET;
+	} else if (!MCDI_SSPM) {
+		return PSCI_E_INVALID_PARAMS;
+	} else {
+		for (i = 0; i <= pwr_lvl; i++)
+			req_state->pwr_domain_state[i] = MTK_LOCAL_STATE_OFF;
+	}
+
+	return PSCI_E_SUCCESS;
+}
+
+#endif /* PSCI_EXTENDED_STATE_ID */
+
 /*******************************************************************************
  * MTK handlers to shutdown/reboot the system
  ******************************************************************************/
@@ -147,21 +519,29 @@
 	panic();
 }
 
+static void plat_mtk_get_sys_suspend_power_state(psci_power_state_t *req_state)
+{
+	assert(PLAT_MAX_PWR_LVL >= 2);
+
+	for (int i = MPIDR_AFFLVL0; i <= PLAT_MAX_PWR_LVL; i++)
+		req_state->pwr_domain_state[i] = MTK_LOCAL_STATE_OFF;
+}
+
 /*******************************************************************************
  * MTK_platform handler called when an affinity instance is about to be turned
  * on. The level and mpidr determine the affinity instance.
  ******************************************************************************/
 static const plat_psci_ops_t plat_plat_pm_ops = {
-	.cpu_standby			= NULL,
+	.cpu_standby			= plat_cpu_standby,
 	.pwr_domain_on			= plat_mtk_power_domain_on,
 	.pwr_domain_on_finish		= plat_mtk_power_domain_on_finish,
 	.pwr_domain_off			= plat_mtk_power_domain_off,
-	.pwr_domain_suspend		= NULL,
-	.pwr_domain_suspend_finish	= NULL,
+	.pwr_domain_suspend		= plat_mtk_power_domain_suspend,
+	.pwr_domain_suspend_finish	= plat_mtk_power_domain_suspend_finish,
 	.system_off			= plat_mtk_system_off,
 	.system_reset			= plat_mtk_system_reset,
-	.validate_power_state		= NULL,
-	.get_sys_suspend_power_state	= NULL,
+	.validate_power_state		= plat_mtk_validate_power_state,
+	.get_sys_suspend_power_state	= plat_mtk_get_sys_suspend_power_state,
 };
 
 int plat_setup_psci_ops(uintptr_t sec_entrypoint,
@@ -169,5 +549,11 @@
 {
 	*psci_ops = &plat_plat_pm_ops;
 	secure_entrypoint = sec_entrypoint;
+
+	if (!check_mcdi_ctl_stat()) {
+		HP_SSPM_CTRL = false;
+		MCDI_SSPM = false;
+	}
+
 	return 0;
 }
diff --git a/plat/mediatek/mt8183/platform.mk b/plat/mediatek/mt8183/platform.mk
index 09fd133..efa7e9e 100644
--- a/plat/mediatek/mt8183/platform.mk
+++ b/plat/mediatek/mt8183/platform.mk
@@ -9,10 +9,14 @@
 
 PLAT_INCLUDES := -I${MTK_PLAT}/common/                            \
                  -I${MTK_PLAT_SOC}/drivers/                       \
+                 -I${MTK_PLAT_SOC}/drivers/mcdi/                  \
                  -I${MTK_PLAT_SOC}/drivers/spmc/                  \
                  -I${MTK_PLAT_SOC}/drivers/gpio/                  \
                  -I${MTK_PLAT_SOC}/drivers/pmic/                  \
+                 -I${MTK_PLAT_SOC}/drivers/spm/                   \
+                 -I${MTK_PLAT_SOC}/drivers/sspm/                  \
                  -I${MTK_PLAT_SOC}/drivers/rtc/                   \
+                 -I${MTK_PLAT_SOC}/drivers/uart/                  \
                  -I${MTK_PLAT_SOC}/include/
 
 PLAT_BL_COMMON_SOURCES := lib/xlat_tables/aarch64/xlat_tables.c       \
@@ -45,15 +49,21 @@
                    ${MTK_PLAT_SOC}/drivers/mcsi/mcsi.c                   \
                    ${MTK_PLAT_SOC}/drivers/pmic/pmic.c                   \
                    ${MTK_PLAT_SOC}/drivers/rtc/rtc.c                     \
+                   ${MTK_PLAT_SOC}/drivers/mcdi/mtk_mcdi.c               \
                    ${MTK_PLAT_SOC}/drivers/spmc/mtspmc.c                 \
+                   ${MTK_PLAT_SOC}/drivers/spm/spm.c                     \
+                   ${MTK_PLAT_SOC}/drivers/spm/spm_pmic_wrap.c           \
+                   ${MTK_PLAT_SOC}/drivers/spm/spm_suspend.c             \
                    ${MTK_PLAT_SOC}/drivers/gpio/mtgpio.c                 \
+                   ${MTK_PLAT_SOC}/drivers/uart/uart.c                   \
                    ${MTK_PLAT_SOC}/plat_pm.c                             \
                    ${MTK_PLAT_SOC}/plat_topology.c                       \
                    ${MTK_PLAT_SOC}/plat_mt_gic.c                         \
                    ${MTK_PLAT_SOC}/plat_dcm.c                            \
                    ${MTK_PLAT_SOC}/bl31_plat_setup.c                     \
                    ${MTK_PLAT_SOC}/plat_debug.c                          \
-                   ${MTK_PLAT_SOC}/scu.c
+                   ${MTK_PLAT_SOC}/scu.c                                 \
+                   ${MTK_PLAT_SOC}/drivers/sspm/sspm.c
 
 # Enable workarounds for selected Cortex-A53 erratas.
 ERRATA_A53_826319 := 0
diff --git a/plat/qemu/aarch32/plat_helpers.S b/plat/qemu/common/aarch32/plat_helpers.S
similarity index 100%
rename from plat/qemu/aarch32/plat_helpers.S
rename to plat/qemu/common/aarch32/plat_helpers.S
diff --git a/plat/qemu/aarch64/plat_helpers.S b/plat/qemu/common/aarch64/plat_helpers.S
similarity index 100%
rename from plat/qemu/aarch64/plat_helpers.S
rename to plat/qemu/common/aarch64/plat_helpers.S
diff --git a/plat/qemu/include/plat_macros.S b/plat/qemu/common/include/plat_macros.S
similarity index 100%
rename from plat/qemu/include/plat_macros.S
rename to plat/qemu/common/include/plat_macros.S
diff --git a/plat/qemu/qemu_bl1_setup.c b/plat/qemu/common/qemu_bl1_setup.c
similarity index 100%
rename from plat/qemu/qemu_bl1_setup.c
rename to plat/qemu/common/qemu_bl1_setup.c
diff --git a/plat/qemu/qemu_bl2_mem_params_desc.c b/plat/qemu/common/qemu_bl2_mem_params_desc.c
similarity index 96%
rename from plat/qemu/qemu_bl2_mem_params_desc.c
rename to plat/qemu/common/qemu_bl2_mem_params_desc.c
index a01f2dc..f8b9066 100644
--- a/plat/qemu/qemu_bl2_mem_params_desc.c
+++ b/plat/qemu/common/qemu_bl2_mem_params_desc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -139,8 +139,7 @@
 	  SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2, image_info_t,
 				0),
 	  .image_info.image_base = NS_IMAGE_OFFSET,
-	  .image_info.image_max_size = NS_DRAM0_BASE + NS_DRAM0_SIZE -
-				       NS_IMAGE_OFFSET,
+	  .image_info.image_max_size = NS_IMAGE_MAX_SIZE,
 # endif /* !PRELOADED_BL33_BASE */
 
 	  .next_handoff_image_id = INVALID_IMAGE_ID,
diff --git a/plat/qemu/qemu_bl2_setup.c b/plat/qemu/common/qemu_bl2_setup.c
similarity index 98%
rename from plat/qemu/qemu_bl2_setup.c
rename to plat/qemu/common/qemu_bl2_setup.c
index 4c97c8d..166d245 100644
--- a/plat/qemu/qemu_bl2_setup.c
+++ b/plat/qemu/common/qemu_bl2_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -15,6 +15,7 @@
 #include <common/bl_common.h>
 #include <common/debug.h>
 #include <common/desc_image_load.h>
+#include <common/fdt_fixup.h>
 #include <lib/optee_utils.h>
 #include <lib/utils.h>
 #include <plat/common/platform.h>
diff --git a/plat/qemu/qemu_bl31_setup.c b/plat/qemu/common/qemu_bl31_setup.c
similarity index 100%
rename from plat/qemu/qemu_bl31_setup.c
rename to plat/qemu/common/qemu_bl31_setup.c
diff --git a/plat/qemu/qemu_common.c b/plat/qemu/common/qemu_common.c
similarity index 100%
rename from plat/qemu/qemu_common.c
rename to plat/qemu/common/qemu_common.c
diff --git a/plat/qemu/qemu_console.c b/plat/qemu/common/qemu_console.c
similarity index 100%
rename from plat/qemu/qemu_console.c
rename to plat/qemu/common/qemu_console.c
diff --git a/plat/qemu/qemu_gicv2.c b/plat/qemu/common/qemu_gicv2.c
similarity index 100%
rename from plat/qemu/qemu_gicv2.c
rename to plat/qemu/common/qemu_gicv2.c
diff --git a/plat/qemu/qemu_gicv3.c b/plat/qemu/common/qemu_gicv3.c
similarity index 100%
rename from plat/qemu/qemu_gicv3.c
rename to plat/qemu/common/qemu_gicv3.c
diff --git a/plat/qemu/qemu_image_load.c b/plat/qemu/common/qemu_image_load.c
similarity index 100%
rename from plat/qemu/qemu_image_load.c
rename to plat/qemu/common/qemu_image_load.c
diff --git a/plat/qemu/qemu_io_storage.c b/plat/qemu/common/qemu_io_storage.c
similarity index 100%
rename from plat/qemu/qemu_io_storage.c
rename to plat/qemu/common/qemu_io_storage.c
diff --git a/plat/qemu/qemu_pm.c b/plat/qemu/common/qemu_pm.c
similarity index 100%
rename from plat/qemu/qemu_pm.c
rename to plat/qemu/common/qemu_pm.c
diff --git a/plat/qemu/qemu_private.h b/plat/qemu/common/qemu_private.h
similarity index 93%
rename from plat/qemu/qemu_private.h
rename to plat/qemu/common/qemu_private.h
index 46b1ca1..71ea4de 100644
--- a/plat/qemu/qemu_private.h
+++ b/plat/qemu/common/qemu_private.h
@@ -28,9 +28,6 @@
 void plat_qemu_io_setup(void);
 unsigned int plat_qemu_calc_core_pos(u_register_t mpidr);
 
-int dt_add_psci_node(void *fdt);
-int dt_add_psci_cpu_enable_methods(void *fdt);
-
 void qemu_console_init(void);
 
 void plat_qemu_gic_init(void);
diff --git a/plat/qemu/qemu_rotpk.S b/plat/qemu/common/qemu_rotpk.S
similarity index 100%
rename from plat/qemu/qemu_rotpk.S
rename to plat/qemu/common/qemu_rotpk.S
diff --git a/plat/qemu/qemu_stack_protector.c b/plat/qemu/common/qemu_stack_protector.c
similarity index 100%
rename from plat/qemu/qemu_stack_protector.c
rename to plat/qemu/common/qemu_stack_protector.c
diff --git a/plat/qemu/qemu_trusted_boot.c b/plat/qemu/common/qemu_trusted_boot.c
similarity index 100%
rename from plat/qemu/qemu_trusted_boot.c
rename to plat/qemu/common/qemu_trusted_boot.c
diff --git a/plat/qemu/sp_min/sp_min-qemu.mk b/plat/qemu/common/sp_min/sp_min-qemu.mk
similarity index 100%
rename from plat/qemu/sp_min/sp_min-qemu.mk
rename to plat/qemu/common/sp_min/sp_min-qemu.mk
diff --git a/plat/qemu/sp_min/sp_min_setup.c b/plat/qemu/common/sp_min/sp_min_setup.c
similarity index 100%
rename from plat/qemu/sp_min/sp_min_setup.c
rename to plat/qemu/common/sp_min/sp_min_setup.c
diff --git a/plat/qemu/topology.c b/plat/qemu/common/topology.c
similarity index 100%
rename from plat/qemu/topology.c
rename to plat/qemu/common/topology.c
diff --git a/plat/qemu/dt.c b/plat/qemu/dt.c
deleted file mode 100644
index b1cd368..0000000
--- a/plat/qemu/dt.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <string.h>
-
-#include <libfdt.h>
-
-#include <common/debug.h>
-#include <drivers/console.h>
-#include <lib/psci/psci.h>
-
-#include "qemu_private.h"
-
-static int append_psci_compatible(void *fdt, int offs, const char *str)
-{
-	return fdt_appendprop(fdt, offs, "compatible", str, strlen(str) + 1);
-}
-
-int dt_add_psci_node(void *fdt)
-{
-	int offs;
-
-	if (fdt_path_offset(fdt, "/psci") >= 0) {
-		WARN("PSCI Device Tree node already exists!\n");
-		return 0;
-	}
-
-	offs = fdt_path_offset(fdt, "/");
-	if (offs < 0)
-		return -1;
-	offs = fdt_add_subnode(fdt, offs, "psci");
-	if (offs < 0)
-		return -1;
-	if (append_psci_compatible(fdt, offs, "arm,psci-1.0"))
-		return -1;
-	if (append_psci_compatible(fdt, offs, "arm,psci-0.2"))
-		return -1;
-	if (append_psci_compatible(fdt, offs, "arm,psci"))
-		return -1;
-	if (fdt_setprop_string(fdt, offs, "method", "smc"))
-		return -1;
-	if (fdt_setprop_u32(fdt, offs, "cpu_suspend", PSCI_CPU_SUSPEND_AARCH64))
-		return -1;
-	if (fdt_setprop_u32(fdt, offs, "cpu_off", PSCI_CPU_OFF))
-		return -1;
-	if (fdt_setprop_u32(fdt, offs, "cpu_on", PSCI_CPU_ON_AARCH64))
-		return -1;
-	if (fdt_setprop_u32(fdt, offs, "sys_poweroff", PSCI_SYSTEM_OFF))
-		return -1;
-	if (fdt_setprop_u32(fdt, offs, "sys_reset", PSCI_SYSTEM_RESET))
-		return -1;
-	return 0;
-}
-
-static int check_node_compat_prefix(void *fdt, int offs, const char *prefix)
-{
-	const size_t prefix_len = strlen(prefix);
-	size_t l;
-	int plen;
-	const char *prop;
-
-	prop = fdt_getprop(fdt, offs, "compatible", &plen);
-	if (!prop)
-		return -1;
-
-	while (plen > 0) {
-		if (memcmp(prop, prefix, prefix_len) == 0)
-			return 0; /* match */
-
-		l = strlen(prop) + 1;
-		prop += l;
-		plen -= l;
-	}
-
-	return -1;
-}
-
-int dt_add_psci_cpu_enable_methods(void *fdt)
-{
-	int offs = 0;
-
-	while (1) {
-		offs = fdt_next_node(fdt, offs, NULL);
-		if (offs < 0)
-			break;
-		if (fdt_getprop(fdt, offs, "enable-method", NULL))
-			continue; /* already set */
-		if (check_node_compat_prefix(fdt, offs, "arm,cortex-a"))
-			continue; /* no compatible */
-		if (fdt_setprop_string(fdt, offs, "enable-method", "psci"))
-			return -1;
-		/* Need to restart scanning as offsets may have changed */
-		offs = 0;
-	}
-	return 0;
-}
diff --git a/plat/qemu/include/platform_def.h b/plat/qemu/qemu/include/platform_def.h
similarity index 98%
rename from plat/qemu/include/platform_def.h
rename to plat/qemu/qemu/include/platform_def.h
index d7f77cc..a905737 100644
--- a/plat/qemu/include/platform_def.h
+++ b/plat/qemu/qemu/include/platform_def.h
@@ -165,7 +165,8 @@
 # error "Unsupported BL32_RAM_LOCATION_ID value"
 #endif
 
-#define NS_IMAGE_OFFSET			0x60000000
+#define NS_IMAGE_OFFSET			(NS_DRAM0_BASE + 0x20000000)
+#define NS_IMAGE_MAX_SIZE		(NS_DRAM0_SIZE - 0x20000000)
 
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
diff --git a/plat/qemu/platform.mk b/plat/qemu/qemu/platform.mk
similarity index 74%
rename from plat/qemu/platform.mk
rename to plat/qemu/qemu/platform.mk
index 6b9749c..5fda2cd 100644
--- a/plat/qemu/platform.mk
+++ b/plat/qemu/qemu/platform.mk
@@ -32,16 +32,20 @@
 $(eval $(call add_define,QEMU_LOAD_BL32))
 endif
 
-PLAT_PATH               :=      plat/qemu/
-PLAT_INCLUDES		:=	-Iplat/qemu/include
+PLAT_QEMU_PATH               :=      plat/qemu/qemu
+PLAT_QEMU_COMMON_PATH        :=      plat/qemu/common
+PLAT_INCLUDES		:=	-Iinclude/plat/arm/common/		\
+				-I${PLAT_QEMU_COMMON_PATH}/include			\
+				-I${PLAT_QEMU_PATH}/include			\
+				-Iinclude/common/tbbr
 
 ifeq (${ARM_ARCH_MAJOR},8)
 PLAT_INCLUDES		+=	-Iinclude/plat/arm/common/${ARCH}
 endif
 
-PLAT_BL_COMMON_SOURCES	:=	plat/qemu/qemu_common.c			  \
-				plat/qemu/qemu_console.c		  \
-				drivers/arm/pl011/${ARCH}/pl011_console.S \
+PLAT_BL_COMMON_SOURCES	:=	${PLAT_QEMU_COMMON_PATH}/qemu_common.c			\
+				${PLAT_QEMU_COMMON_PATH}/qemu_console.c		  \
+				drivers/arm/pl011/${ARCH}/pl011_console.S
 
 include lib/xlat_tables_v2/xlat_tables.mk
 PLAT_BL_COMMON_SOURCES	+=	${XLAT_TABLES_LIB_SRCS}
@@ -59,13 +63,13 @@
     BL1_SOURCES		+=	${AUTH_SOURCES}				\
 				bl1/tbbr/tbbr_img_desc.c		\
 				plat/common/tbbr/plat_tbbr.c		\
-				plat/qemu/qemu_trusted_boot.c	     	\
-				$(PLAT_PATH)/qemu_rotpk.S
+				${PLAT_QEMU_COMMON_PATH}/qemu_trusted_boot.c	     	\
+				$(PLAT_QEMU_COMMON_PATH)/qemu_rotpk.S
 
     BL2_SOURCES		+=	${AUTH_SOURCES}				\
 				plat/common/tbbr/plat_tbbr.c		\
-				plat/qemu/qemu_trusted_boot.c	     	\
-				$(PLAT_PATH)/qemu_rotpk.S
+				${PLAT_QEMU_COMMON_PATH}/qemu_trusted_boot.c	     	\
+				$(PLAT_QEMU_COMMON_PATH)/qemu_rotpk.S
 
     ROT_KEY             = $(BUILD_PLAT)/rot_key.pem
     ROTPK_HASH          = $(BUILD_PLAT)/rotpk_sha256.bin
@@ -93,9 +97,9 @@
 				drivers/io/io_memmap.c			\
 				lib/semihosting/semihosting.c		\
 				lib/semihosting/${ARCH}/semihosting_call.S \
-				plat/qemu/qemu_io_storage.c		\
-				plat/qemu/${ARCH}/plat_helpers.S	\
-				plat/qemu/qemu_bl1_setup.c
+				${PLAT_QEMU_COMMON_PATH}/qemu_io_storage.c		\
+				${PLAT_QEMU_COMMON_PATH}/${ARCH}/plat_helpers.S	\
+				${PLAT_QEMU_COMMON_PATH}/qemu_bl1_setup.c
 
 ifeq (${ARM_ARCH_MAJOR},8)
 BL1_SOURCES		+=	lib/cpus/aarch64/aem_generic.S		\
@@ -110,13 +114,13 @@
 				drivers/io/io_fip.c			\
 				drivers/io/io_memmap.c			\
 				lib/semihosting/semihosting.c		\
-				lib/semihosting/${ARCH}/semihosting_call.S\
-				plat/qemu/qemu_io_storage.c		\
-				plat/qemu/${ARCH}/plat_helpers.S	\
-				plat/qemu/qemu_bl2_setup.c		\
-				plat/qemu/dt.c				\
-				plat/qemu/qemu_bl2_mem_params_desc.c	\
-				plat/qemu/qemu_image_load.c		\
+				lib/semihosting/${ARCH}/semihosting_call.S		\
+				${PLAT_QEMU_COMMON_PATH}/qemu_io_storage.c		\
+				${PLAT_QEMU_COMMON_PATH}/${ARCH}/plat_helpers.S		\
+				${PLAT_QEMU_COMMON_PATH}/qemu_bl2_setup.c		\
+				${PLAT_QEMU_COMMON_PATH}/qemu_bl2_mem_params_desc.c	\
+				${PLAT_QEMU_COMMON_PATH}/qemu_image_load.c		\
+				common/fdt_fixup.c					\
 				common/desc_image_load.c
 
 ifeq ($(add-lib-optee),yes)
@@ -127,13 +131,13 @@
 				drivers/arm/gic/v2/gicv2_main.c		\
 				drivers/arm/gic/common/gic_common.c	\
 				plat/common/plat_gicv2.c		\
-				plat/qemu/qemu_gicv2.c
+				${PLAT_QEMU_COMMON_PATH}/qemu_gicv2.c
 
 QEMU_GICV3_SOURCES	:=	drivers/arm/gic/v3/gicv3_helpers.c	\
 				drivers/arm/gic/v3/gicv3_main.c		\
 				drivers/arm/gic/common/gic_common.c	\
 				plat/common/plat_gicv3.c		\
-				plat/qemu/qemu_gicv3.c
+				${PLAT_QEMU_COMMON_PATH}/qemu_gicv3.c
 
 ifeq (${QEMU_USE_GIC_DRIVER}, QEMU_GICV2)
 QEMU_GIC_SOURCES	:=	${QEMU_GICV2_SOURCES}
@@ -148,10 +152,10 @@
 				lib/cpus/aarch64/cortex_a53.S		\
 				lib/cpus/aarch64/cortex_a57.S		\
 				plat/common/plat_psci_common.c		\
-				plat/qemu/qemu_pm.c			\
-				plat/qemu/topology.c			\
-				plat/qemu/aarch64/plat_helpers.S	\
-				plat/qemu/qemu_bl31_setup.c		\
+				${PLAT_QEMU_COMMON_PATH}/qemu_pm.c			\
+				${PLAT_QEMU_COMMON_PATH}/topology.c			\
+				${PLAT_QEMU_COMMON_PATH}/aarch64/plat_helpers.S	\
+				${PLAT_QEMU_COMMON_PATH}/qemu_bl31_setup.c		\
 				${QEMU_GIC_SOURCES}
 endif
 
@@ -167,7 +171,7 @@
 SEPARATE_CODE_AND_RODATA := 1
 ENABLE_STACK_PROTECTOR	 := 0
 ifneq ($(ENABLE_STACK_PROTECTOR), 0)
-	PLAT_BL_COMMON_SOURCES += plat/qemu/qemu_stack_protector.c
+	PLAT_BL_COMMON_SOURCES += ${PLAT_QEMU_COMMON_PATH}/qemu_stack_protector.c
 endif
 
 BL32_RAM_LOCATION	:=	tdram
diff --git a/plat/rockchip/px30/include/platform_def.h b/plat/rockchip/px30/include/platform_def.h
index c101cdc..9dccab8 100644
--- a/plat/rockchip/px30/include/platform_def.h
+++ b/plat/rockchip/px30/include/platform_def.h
@@ -69,7 +69,7 @@
 /*******************************************************************************
  * Platform memory map related constants
  ******************************************************************************/
-/* TF txet, ro, rw, Size: 512KB */
+/* TF text, ro, rw, Size: 512KB */
 #define TZRAM_BASE		(0x0)
 #define TZRAM_SIZE		(0x80000)
 
@@ -79,7 +79,7 @@
 /*
  * Put BL3-1 at the top of the Trusted RAM
  */
-#define BL31_BASE		(TZRAM_BASE + 0x10000)
+#define BL31_BASE		(TZRAM_BASE + 0x40000)
 #define BL31_LIMIT		(TZRAM_BASE + TZRAM_SIZE)
 
 /*******************************************************************************
diff --git a/plat/rockchip/rk3288/include/shared/bl32_param.h b/plat/rockchip/rk3288/include/shared/bl32_param.h
index 743dad4..ffdb2f3 100644
--- a/plat/rockchip/rk3288/include/shared/bl32_param.h
+++ b/plat/rockchip/rk3288/include/shared/bl32_param.h
@@ -10,9 +10,9 @@
 /*******************************************************************************
  * Platform memory map related constants
  ******************************************************************************/
-/* TF txet, ro, rw, Size: 2MB */
+/* TF text, ro, rw, Size: 1MB */
 #define TZRAM_BASE		(0x0)
-#define TZRAM_SIZE		(0x200000)
+#define TZRAM_SIZE		(0x100000)
 
 /*******************************************************************************
  * BL32 specific defines.
@@ -20,7 +20,7 @@
 /*
  * Put BL32 at the top of the Trusted RAM
  */
-#define BL32_BASE			(TZRAM_BASE + 0x100000)
+#define BL32_BASE			(TZRAM_BASE + 0x40000)
 #define BL32_LIMIT			(TZRAM_BASE + TZRAM_SIZE)
 
 #endif /* BL32_PARAM_H */
diff --git a/plat/rockchip/rk3328/include/platform_def.h b/plat/rockchip/rk3328/include/platform_def.h
index 3104d9f..baac12d 100644
--- a/plat/rockchip/rk3328/include/platform_def.h
+++ b/plat/rockchip/rk3328/include/platform_def.h
@@ -66,7 +66,7 @@
 /*******************************************************************************
  * Platform memory map related constants
  ******************************************************************************/
-/* TF txet, ro, rw, Size: 512KB */
+/* TF text, ro, rw, Size: 512KB */
 #define TZRAM_BASE		(0x0)
 #define TZRAM_SIZE		(0x80000)
 
@@ -76,7 +76,7 @@
 /*
  * Put BL3-1 at the top of the Trusted RAM
  */
-#define BL31_BASE		(TZRAM_BASE + 0x10000)
+#define BL31_BASE		(TZRAM_BASE + 0x40000)
 #define BL31_LIMIT		(TZRAM_BASE + TZRAM_SIZE)
 
 /*******************************************************************************
diff --git a/plat/rockchip/rk3368/include/platform_def.h b/plat/rockchip/rk3368/include/platform_def.h
index 7b3cc6e..9334a83 100644
--- a/plat/rockchip/rk3368/include/platform_def.h
+++ b/plat/rockchip/rk3368/include/platform_def.h
@@ -67,7 +67,7 @@
 /*******************************************************************************
  * Platform memory map related constants
  ******************************************************************************/
-/* TF txet, ro, rw, Size: 512KB */
+/* TF text, ro, rw, Size: 512KB */
 #define TZRAM_BASE		(0x0)
 #define TZRAM_SIZE		(0x80000)
 
@@ -77,7 +77,7 @@
 /*
  * Put BL3-1 at the top of the Trusted RAM
  */
-#define BL31_BASE		(TZRAM_BASE + 0x10000)
+#define BL31_BASE		(TZRAM_BASE + 0x40000)
 #define BL31_LIMIT	(TZRAM_BASE + TZRAM_SIZE)
 
 /*******************************************************************************
diff --git a/plat/rockchip/rk3399/include/shared/bl31_param.h b/plat/rockchip/rk3399/include/shared/bl31_param.h
index e7f2226..6e7e8ba 100644
--- a/plat/rockchip/rk3399/include/shared/bl31_param.h
+++ b/plat/rockchip/rk3399/include/shared/bl31_param.h
@@ -20,7 +20,7 @@
 /*
  * Put BL31 at the top of the Trusted RAM
  */
-#define BL31_BASE		(TZRAM_BASE + 0x1000)
+#define BL31_BASE		(TZRAM_BASE + 0x40000)
 #define BL31_LIMIT		(TZRAM_BASE + TZRAM_SIZE)
 
 #endif /* BL31_PARAM_H */
diff --git a/plat/rpi3/rpi3_private.h b/plat/rpi/common/include/rpi_shared.h
similarity index 81%
rename from plat/rpi3/rpi3_private.h
rename to plat/rpi/common/include/rpi_shared.h
index 53078f8..de83571 100644
--- a/plat/rpi3/rpi3_private.h
+++ b/plat/rpi/common/include/rpi_shared.h
@@ -1,11 +1,11 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
-#ifndef RPI3_PRIVATE_H
-#define RPI3_PRIVATE_H
+#ifndef RPI_SHARED_H
+#define RPI_SHARED_H
 
 #include <stdint.h>
 
@@ -14,7 +14,7 @@
  ******************************************************************************/
 
 /* Utility functions */
-void rpi3_console_init(void);
+void rpi3_console_init(unsigned int base_clk_rate);
 void rpi3_setup_page_tables(uintptr_t total_base, size_t total_size,
 			    uintptr_t code_start, uintptr_t code_limit,
 			    uintptr_t rodata_start, uintptr_t rodata_limit
@@ -33,9 +33,6 @@
 /* IO storage utility functions */
 void plat_rpi3_io_setup(void);
 
-/* Hardware RNG functions */
-void rpi3_rng_read(void *buf, size_t len);
-
 /* VideoCore firmware commands */
 int rpi3_vc_hardware_get_board_revision(uint32_t *revision);
 
diff --git a/plat/rpi3/rpi3_common.c b/plat/rpi/common/rpi3_common.c
similarity index 91%
rename from plat/rpi3/rpi3_common.c
rename to plat/rpi/common/rpi3_common.c
index 9b10974..ff33694 100644
--- a/plat/rpi3/rpi3_common.c
+++ b/plat/rpi/common/rpi3_common.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -16,16 +16,18 @@
 #include <drivers/ti/uart/uart_16550.h>
 #include <lib/xlat_tables/xlat_tables_v2.h>
 
-#include "rpi3_hw.h"
-#include "rpi3_private.h"
+#include <rpi_hw.h>
+#include <rpi_shared.h>
 
 #define MAP_DEVICE0	MAP_REGION_FLAT(DEVICE0_BASE,			\
 					DEVICE0_SIZE,			\
 					MT_DEVICE | MT_RW | MT_SECURE)
 
+#ifdef SHARED_RAM_BASE
 #define MAP_SHARED_RAM	MAP_REGION_FLAT(SHARED_RAM_BASE,		\
 					SHARED_RAM_SIZE,		\
 					MT_DEVICE | MT_RW | MT_SECURE)
+#endif
 
 #ifdef RPI3_PRELOADED_DTB_BASE
 #define MAP_NS_DTB	MAP_REGION_FLAT(RPI3_PRELOADED_DTB_BASE, 0x10000, \
@@ -54,7 +56,9 @@
  */
 #ifdef IMAGE_BL1
 static const mmap_region_t plat_rpi3_mmap[] = {
+#ifdef MAP_SHARED_RAM
 	MAP_SHARED_RAM,
+#endif
 	MAP_DEVICE0,
 	MAP_FIP,
 #ifdef SPD_opteed
@@ -66,7 +70,9 @@
 
 #ifdef IMAGE_BL2
 static const mmap_region_t plat_rpi3_mmap[] = {
+#ifdef MAP_SHARED_RAM
 	MAP_SHARED_RAM,
+#endif
 	MAP_DEVICE0,
 	MAP_FIP,
 	MAP_NS_DRAM0,
@@ -79,7 +85,9 @@
 
 #ifdef IMAGE_BL31
 static const mmap_region_t plat_rpi3_mmap[] = {
+#ifdef MAP_SHARED_RAM
 	MAP_SHARED_RAM,
+#endif
 	MAP_DEVICE0,
 #ifdef RPI3_PRELOADED_DTB_BASE
 	MAP_NS_DTB,
@@ -96,14 +104,14 @@
  ******************************************************************************/
 static console_16550_t rpi3_console;
 
-void rpi3_console_init(void)
+void rpi3_console_init(unsigned int base_clk_rate)
 {
 	int console_scope = CONSOLE_FLAG_BOOT;
 #if RPI3_RUNTIME_UART != -1
 	console_scope |= CONSOLE_FLAG_RUNTIME;
 #endif
 	int rc = console_16550_register(PLAT_RPI3_UART_BASE,
-					PLAT_RPI3_UART_CLK_IN_HZ,
+					base_clk_rate,
 					PLAT_RPI3_UART_BAUDRATE,
 					&rpi3_console);
 	if (rc == 0) {
@@ -168,18 +176,6 @@
 }
 
 /*******************************************************************************
- * Return entrypoint of BL33.
- ******************************************************************************/
-uintptr_t plat_get_ns_image_entrypoint(void)
-{
-#ifdef PRELOADED_BL33_BASE
-	return PRELOADED_BL33_BASE;
-#else
-	return PLAT_RPI3_NS_IMAGE_OFFSET;
-#endif
-}
-
-/*******************************************************************************
  * Gets SPSR for BL32 entry
  ******************************************************************************/
 uint32_t rpi3_get_spsr_for_bl32_entry(void)
diff --git a/plat/rpi3/rpi3_image_load.c b/plat/rpi/common/rpi3_image_load.c
similarity index 100%
rename from plat/rpi3/rpi3_image_load.c
rename to plat/rpi/common/rpi3_image_load.c
diff --git a/plat/rpi3/rpi3_io_storage.c b/plat/rpi/common/rpi3_io_storage.c
similarity index 100%
rename from plat/rpi3/rpi3_io_storage.c
rename to plat/rpi/common/rpi3_io_storage.c
diff --git a/plat/rpi3/rpi3_pm.c b/plat/rpi/common/rpi3_pm.c
similarity index 95%
rename from plat/rpi3/rpi3_pm.c
rename to plat/rpi/common/rpi3_pm.c
index 4f586b5..8c2d070 100644
--- a/plat/rpi3/rpi3_pm.c
+++ b/plat/rpi/common/rpi3_pm.c
@@ -15,7 +15,11 @@
 #include <lib/psci/psci.h>
 #include <plat/common/platform.h>
 
-#include "rpi3_hw.h"
+#include <rpi_hw.h>
+
+#ifdef RPI_HAVE_GIC
+#include <drivers/arm/gicv2.h>
+#endif
 
 /* Make composite power state parameter till power level 0 */
 #if PSCI_EXTENDED_STATE_ID
@@ -112,6 +116,13 @@
 	wfi();
 }
 
+static void rpi3_pwr_domain_off(const psci_power_state_t *target_state)
+{
+#ifdef RPI_HAVE_GIC
+	gicv2_cpuif_disable();
+#endif
+}
+
 /*******************************************************************************
  * Platform handler called when a power domain is about to be turned on. The
  * mpidr determines the CPU to be turned on.
@@ -144,6 +155,11 @@
 {
 	assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] ==
 					PLAT_LOCAL_STATE_OFF);
+
+#ifdef RPI_HAVE_GIC
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+#endif
 }
 
 /*******************************************************************************
@@ -207,6 +223,7 @@
  ******************************************************************************/
 static const plat_psci_ops_t plat_rpi3_psci_pm_ops = {
 	.cpu_standby = rpi3_cpu_standby,
+	.pwr_domain_off = rpi3_pwr_domain_off,
 	.pwr_domain_on = rpi3_pwr_domain_on,
 	.pwr_domain_on_finish = rpi3_pwr_domain_on_finish,
 	.system_off = rpi3_system_off,
diff --git a/plat/rpi3/rpi3_rotpk.S b/plat/rpi/common/rpi3_rotpk.S
similarity index 100%
rename from plat/rpi3/rpi3_rotpk.S
rename to plat/rpi/common/rpi3_rotpk.S
diff --git a/plat/rpi3/rpi3_stack_protector.c b/plat/rpi/common/rpi3_stack_protector.c
similarity index 93%
rename from plat/rpi3/rpi3_stack_protector.c
rename to plat/rpi/common/rpi3_stack_protector.c
index 6f49f61..aae5fac 100644
--- a/plat/rpi3/rpi3_stack_protector.c
+++ b/plat/rpi/common/rpi3_stack_protector.c
@@ -9,7 +9,7 @@
 #include <lib/utils.h>
 #include <lib/utils_def.h>
 
-#include "rpi3_private.h"
+#include <drivers/rpi3/rng/rpi3_rng.h>
 
 /* Get 128 bits of entropy and fuse the values together to form the canary. */
 #define TRNG_NBYTES	16U
diff --git a/plat/rpi3/rpi3_topology.c b/plat/rpi/common/rpi3_topology.c
similarity index 94%
rename from plat/rpi3/rpi3_topology.c
rename to plat/rpi/common/rpi3_topology.c
index 200d41d..3747287 100644
--- a/plat/rpi3/rpi3_topology.c
+++ b/plat/rpi/common/rpi3_topology.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -10,7 +10,7 @@
 
 #include <arch.h>
 
-#include "rpi3_private.h"
+#include <rpi_shared.h>
 
 /* The power domain tree descriptor */
 static unsigned char power_domain_tree_desc[] = {
diff --git a/plat/rpi3/rpi3_trusted_boot.c b/plat/rpi/common/rpi3_trusted_boot.c
similarity index 100%
rename from plat/rpi3/rpi3_trusted_boot.c
rename to plat/rpi/common/rpi3_trusted_boot.c
diff --git a/plat/rpi3/aarch64/plat_helpers.S b/plat/rpi/rpi3/aarch64/plat_helpers.S
similarity index 91%
rename from plat/rpi3/aarch64/plat_helpers.S
rename to plat/rpi/rpi3/aarch64/plat_helpers.S
index 7974b60..24278bd 100644
--- a/plat/rpi3/aarch64/plat_helpers.S
+++ b/plat/rpi/rpi3/aarch64/plat_helpers.S
@@ -9,7 +9,7 @@
 #include <assert_macros.S>
 #include <platform_def.h>
 
-#include "../rpi3_hw.h"
+#include "../include/rpi_hw.h"
 
 	.globl	plat_crash_console_flush
 	.globl	plat_crash_console_init
@@ -18,7 +18,6 @@
 	.globl	plat_get_my_entrypoint
 	.globl	plat_is_my_cpu_primary
 	.globl	plat_my_core_pos
-	.globl	plat_reset_handler
 	.globl	plat_rpi3_calc_core_pos
 	.globl	plat_secondary_cold_boot_setup
 
@@ -164,16 +163,3 @@
 	mov_imm	x0, PLAT_RPI3_UART_BASE
 	b	console_16550_core_flush
 endfunc plat_crash_console_flush
-
-	/* ---------------------------------------------
-	 * void plat_reset_handler(void);
-	 * ---------------------------------------------
-	 */
-func plat_reset_handler
-	/* use the 19.2 MHz clock for the architected timer */
-	mov	x0, #RPI3_INTC_BASE_ADDRESS
-	mov	w1, #0x80000000
-	str	wzr, [x0, #RPI3_INTC_CONTROL_OFFSET]
-	str	w1, [x0, #RPI3_INTC_PRESCALER_OFFSET]
-	ret
-endfunc plat_reset_handler
diff --git a/plat/rpi3/aarch64/rpi3_bl2_mem_params_desc.c b/plat/rpi/rpi3/aarch64/rpi3_bl2_mem_params_desc.c
similarity index 100%
rename from plat/rpi3/aarch64/rpi3_bl2_mem_params_desc.c
rename to plat/rpi/rpi3/aarch64/rpi3_bl2_mem_params_desc.c
diff --git a/plat/rpi3/include/plat_macros.S b/plat/rpi/rpi3/include/plat_macros.S
similarity index 100%
rename from plat/rpi3/include/plat_macros.S
rename to plat/rpi/rpi3/include/plat_macros.S
diff --git a/plat/rpi3/include/platform_def.h b/plat/rpi/rpi3/include/platform_def.h
similarity index 98%
rename from plat/rpi3/include/platform_def.h
rename to plat/rpi/rpi3/include/platform_def.h
index 4d90222..e308f70 100644
--- a/plat/rpi3/include/platform_def.h
+++ b/plat/rpi/rpi3/include/platform_def.h
@@ -12,7 +12,7 @@
 #include <lib/utils_def.h>
 #include <plat/common/common_def.h>
 
-#include "../rpi3_hw.h"
+#include "rpi_hw.h"
 
 /* Special value used to verify platform parameters from BL2 to BL31 */
 #define RPI3_BL31_PLAT_PARAM_VAL	ULL(0x0F1E2D3C4B5A6978)
@@ -110,8 +110,8 @@
 /*
  * I/O registers.
  */
-#define DEVICE0_BASE			RPI3_IO_BASE
-#define DEVICE0_SIZE			RPI3_IO_SIZE
+#define DEVICE0_BASE			RPI_IO_BASE
+#define DEVICE0_SIZE			RPI_IO_SIZE
 
 /*
  * Arm TF lives in SRAM, partition it here
diff --git a/plat/rpi3/rpi3_hw.h b/plat/rpi/rpi3/include/rpi_hw.h
similarity index 84%
rename from plat/rpi3/rpi3_hw.h
rename to plat/rpi/rpi3/include/rpi_hw.h
index 1a86835..01d5b4a 100644
--- a/plat/rpi3/rpi3_hw.h
+++ b/plat/rpi/rpi3/include/rpi_hw.h
@@ -4,8 +4,8 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
-#ifndef RPI3_HW_H
-#define RPI3_HW_H
+#ifndef RPI_HW_H
+#define RPI_HW_H
 
 #include <lib/utils_def.h>
 
@@ -13,14 +13,14 @@
  * Peripherals
  */
 
-#define RPI3_IO_BASE			ULL(0x3F000000)
-#define RPI3_IO_SIZE			ULL(0x01000000)
+#define RPI_IO_BASE			ULL(0x3F000000)
+#define RPI_IO_SIZE			ULL(0x01000000)
 
 /*
  * ARM <-> VideoCore mailboxes
  */
 #define RPI3_MBOX_OFFSET		ULL(0x0000B880)
-#define RPI3_MBOX_BASE			(RPI3_IO_BASE + RPI3_MBOX_OFFSET)
+#define RPI3_MBOX_BASE			(RPI_IO_BASE + RPI3_MBOX_OFFSET)
 /* VideoCore -> ARM */
 #define RPI3_MBOX0_READ_OFFSET		ULL(0x00000000)
 #define RPI3_MBOX0_PEEK_OFFSET		ULL(0x00000010)
@@ -41,7 +41,7 @@
  * Power management, reset controller, watchdog.
  */
 #define RPI3_IO_PM_OFFSET		ULL(0x00100000)
-#define RPI3_PM_BASE			(RPI3_IO_BASE + RPI3_IO_PM_OFFSET)
+#define RPI3_PM_BASE			(RPI_IO_BASE + RPI3_IO_PM_OFFSET)
 /* Registers on top of RPI3_PM_BASE. */
 #define RPI3_PM_RSTC_OFFSET		ULL(0x0000001C)
 #define RPI3_PM_RSTS_OFFSET		ULL(0x00000020)
@@ -62,7 +62,7 @@
  * Hardware random number generator.
  */
 #define RPI3_IO_RNG_OFFSET		ULL(0x00104000)
-#define RPI3_RNG_BASE			(RPI3_IO_BASE + RPI3_IO_RNG_OFFSET)
+#define RPI3_RNG_BASE			(RPI_IO_BASE + RPI3_IO_RNG_OFFSET)
 #define RPI3_RNG_CTRL_OFFSET		ULL(0x00000000)
 #define RPI3_RNG_STATUS_OFFSET		ULL(0x00000004)
 #define RPI3_RNG_DATA_OFFSET		ULL(0x00000008)
@@ -80,20 +80,20 @@
  * Serial port (called 'Mini UART' in the BCM docucmentation).
  */
 #define RPI3_IO_MINI_UART_OFFSET	ULL(0x00215040)
-#define RPI3_MINI_UART_BASE		(RPI3_IO_BASE + RPI3_IO_MINI_UART_OFFSET)
+#define RPI3_MINI_UART_BASE		(RPI_IO_BASE + RPI3_IO_MINI_UART_OFFSET)
 #define RPI3_MINI_UART_CLK_IN_HZ	ULL(500000000)
 
 /*
  * GPIO controller
  */
 #define RPI3_IO_GPIO_OFFSET		ULL(0x00200000)
-#define RPI3_GPIO_BASE			(RPI3_IO_BASE + RPI3_IO_GPIO_OFFSET)
+#define RPI3_GPIO_BASE			(RPI_IO_BASE + RPI3_IO_GPIO_OFFSET)
 
 /*
  * SDHost controller
  */
 #define RPI3_IO_SDHOST_OFFSET           ULL(0x00202000)
-#define RPI3_SDHOST_BASE                (RPI3_IO_BASE + RPI3_IO_SDHOST_OFFSET)
+#define RPI3_SDHOST_BASE                (RPI_IO_BASE + RPI3_IO_SDHOST_OFFSET)
 
 /*
  * Local interrupt controller
@@ -107,4 +107,4 @@
 #define RPI3_INTC_PENDING_FIQ_OFFSET		ULL(0x00000070)
 #define RPI3_INTC_PENDING_FIQ_MBOX3		ULL(0x00000080)
 
-#endif /* RPI3_HW_H */
+#endif /* RPI_HW_H */
diff --git a/plat/rpi3/platform.mk b/plat/rpi/rpi3/platform.mk
similarity index 83%
rename from plat/rpi3/platform.mk
rename to plat/rpi/rpi3/platform.mk
index f238cd6..a21a770 100644
--- a/plat/rpi3/platform.mk
+++ b/plat/rpi/rpi3/platform.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -7,10 +7,11 @@
 include lib/libfdt/libfdt.mk
 include lib/xlat_tables_v2/xlat_tables.mk
 
-PLAT_INCLUDES		:=	-Iplat/rpi3/include
+PLAT_INCLUDES		:=	-Iplat/rpi/common/include		\
+				-Iplat/rpi/rpi3/include
 
 PLAT_BL_COMMON_SOURCES	:=	drivers/ti/uart/aarch64/16550_console.S	\
-				plat/rpi3/rpi3_common.c			\
+				plat/rpi/common/rpi3_common.c		\
 				${XLAT_TABLES_LIB_SRCS}
 
 BL1_SOURCES		+=	drivers/io/io_fip.c			\
@@ -18,10 +19,11 @@
 				drivers/io/io_storage.c			\
 				lib/cpus/aarch64/cortex_a53.S		\
 				plat/common/aarch64/platform_mp_stack.S	\
-				plat/rpi3/aarch64/plat_helpers.S	\
-				plat/rpi3/rpi3_bl1_setup.c		\
-				plat/rpi3/rpi3_io_storage.c		\
-				plat/rpi3/rpi3_mbox.c
+				plat/rpi/rpi3/aarch64/plat_helpers.S	\
+				plat/rpi/rpi3/rpi3_bl1_setup.c		\
+				plat/rpi/common/rpi3_io_storage.c	\
+				drivers/rpi3/mailbox/rpi3_mbox.c	\
+				plat/rpi/rpi3/rpi_mbox_board.c
 
 BL2_SOURCES		+=	common/desc_image_load.c		\
 				drivers/io/io_fip.c			\
@@ -35,18 +37,18 @@
 				drivers/mmc/mmc.c			\
 				drivers/rpi3/sdhost/rpi3_sdhost.c	\
 				plat/common/aarch64/platform_mp_stack.S	\
-				plat/rpi3/aarch64/plat_helpers.S	\
-				plat/rpi3/aarch64/rpi3_bl2_mem_params_desc.c \
-				plat/rpi3/rpi3_bl2_setup.c		\
-				plat/rpi3/rpi3_image_load.c		\
-				plat/rpi3/rpi3_io_storage.c
+				plat/rpi/rpi3/aarch64/plat_helpers.S	\
+				plat/rpi/rpi3/aarch64/rpi3_bl2_mem_params_desc.c \
+				plat/rpi/rpi3/rpi3_bl2_setup.c		\
+				plat/rpi/common/rpi3_image_load.c	\
+				plat/rpi/common/rpi3_io_storage.c
 
 BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a53.S		\
 				plat/common/plat_psci_common.c		\
-				plat/rpi3/aarch64/plat_helpers.S	\
-				plat/rpi3/rpi3_bl31_setup.c		\
-				plat/rpi3/rpi3_pm.c			\
-				plat/rpi3/rpi3_topology.c		\
+				plat/rpi/rpi3/aarch64/plat_helpers.S	\
+				plat/rpi/rpi3/rpi3_bl31_setup.c		\
+				plat/rpi/common/rpi3_pm.c		\
+				plat/rpi/common/rpi3_topology.c		\
 				${LIBFDT_SRCS}
 
 # Tune compiler for Cortex-A53
@@ -158,8 +160,8 @@
 endif
 
 ifneq ($(ENABLE_STACK_PROTECTOR), 0)
-PLAT_BL_COMMON_SOURCES	+=	plat/rpi3/rpi3_rng.c			\
-				plat/rpi3/rpi3_stack_protector.c
+PLAT_BL_COMMON_SOURCES	+=	drivers/rpi3/rng/rpi3_rng.c		\
+				plat/rpi/common/rpi3_stack_protector.c
 endif
 
 ifeq (${SPD},opteed)
@@ -189,13 +191,13 @@
     BL1_SOURCES		+=	${AUTH_SOURCES}				\
 				bl1/tbbr/tbbr_img_desc.c		\
 				plat/common/tbbr/plat_tbbr.c		\
-				plat/rpi3/rpi3_trusted_boot.c	     	\
-				plat/rpi3/rpi3_rotpk.S
+				plat/rpi/common/rpi3_trusted_boot.c    	\
+				plat/rpi/common/rpi3_rotpk.S
 
     BL2_SOURCES		+=	${AUTH_SOURCES}				\
 				plat/common/tbbr/plat_tbbr.c		\
-				plat/rpi3/rpi3_trusted_boot.c	     	\
-				plat/rpi3/rpi3_rotpk.S
+				plat/rpi/common/rpi3_trusted_boot.c    	\
+				plat/rpi/common/rpi3_rotpk.S
 
     ROT_KEY             = $(BUILD_PLAT)/rot_key.pem
     ROTPK_HASH          = $(BUILD_PLAT)/rotpk_sha256.bin
diff --git a/plat/rpi3/rpi3_bl1_setup.c b/plat/rpi/rpi3/rpi3_bl1_setup.c
similarity index 86%
rename from plat/rpi3/rpi3_bl1_setup.c
rename to plat/rpi/rpi3/rpi3_bl1_setup.c
index b869e9d..dcce76e 100644
--- a/plat/rpi3/rpi3_bl1_setup.c
+++ b/plat/rpi/rpi3/rpi3_bl1_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -10,10 +10,11 @@
 #include <arch_helpers.h>
 #include <common/bl_common.h>
 #include <common/debug.h>
+#include <lib/mmio.h>
 #include <lib/xlat_tables/xlat_mmu_helpers.h>
 #include <lib/xlat_tables/xlat_tables_defs.h>
 
-#include "rpi3_private.h"
+#include <rpi_shared.h>
 
 /* Data structure which holds the extents of the trusted SRAM for BL1 */
 static meminfo_t bl1_tzram_layout;
@@ -28,8 +29,13 @@
  ******************************************************************************/
 void bl1_early_platform_setup(void)
 {
+	/* use the 19.2 MHz clock for the architected timer */
+	mmio_write_32(RPI3_INTC_BASE_ADDRESS + RPI3_INTC_CONTROL_OFFSET, 0);
+	mmio_write_32(RPI3_INTC_BASE_ADDRESS + RPI3_INTC_PRESCALER_OFFSET,
+		      0x80000000);
+
 	/* Initialize the console to provide early debug support */
-	rpi3_console_init();
+	rpi3_console_init(PLAT_RPI3_UART_CLK_IN_HZ);
 
 	/* Allow BL1 to see the whole Trusted RAM */
 	bl1_tzram_layout.total_base = BL_RAM_BASE;
diff --git a/plat/rpi3/rpi3_bl2_setup.c b/plat/rpi/rpi3/rpi3_bl2_setup.c
similarity index 96%
rename from plat/rpi3/rpi3_bl2_setup.c
rename to plat/rpi/rpi3/rpi3_bl2_setup.c
index b5e5835..44827c6 100644
--- a/plat/rpi3/rpi3_bl2_setup.c
+++ b/plat/rpi/rpi3/rpi3_bl2_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -19,7 +19,7 @@
 #include <drivers/rpi3/gpio/rpi3_gpio.h>
 #include <drivers/rpi3/sdhost/rpi3_sdhost.h>
 
-#include "rpi3_private.h"
+#include <rpi_shared.h>
 
 /* Data structure which holds the extents of the trusted SRAM for BL2 */
 static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
@@ -62,7 +62,7 @@
 	meminfo_t *mem_layout = (meminfo_t *) arg1;
 
 	/* Initialize the console to provide early debug support */
-	rpi3_console_init();
+	rpi3_console_init(PLAT_RPI3_UART_CLK_IN_HZ);
 
 	/* Enable arch timer */
 	generic_delay_timer_init();
diff --git a/plat/rpi3/rpi3_bl31_setup.c b/plat/rpi/rpi3/rpi3_bl31_setup.c
similarity index 92%
rename from plat/rpi3/rpi3_bl31_setup.c
rename to plat/rpi/rpi3/rpi3_bl31_setup.c
index 2f1bc64..24a5613 100644
--- a/plat/rpi3/rpi3_bl31_setup.c
+++ b/plat/rpi/rpi3/rpi3_bl31_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -15,7 +15,7 @@
 #include <lib/xlat_tables/xlat_tables_defs.h>
 #include <plat/common/platform.h>
 
-#include "rpi3_private.h"
+#include <rpi_shared.h>
 
 /*
  * Placeholder variables for copying the arguments that have been passed to
@@ -48,6 +48,18 @@
 }
 
 /*******************************************************************************
+ * Return entrypoint of BL33.
+ ******************************************************************************/
+uintptr_t plat_get_ns_image_entrypoint(void)
+{
+#ifdef PRELOADED_BL33_BASE
+	return PRELOADED_BL33_BASE;
+#else
+	return PLAT_RPI3_NS_IMAGE_OFFSET;
+#endif
+}
+
+/*******************************************************************************
  * Perform any BL31 early platform setup. Here is an opportunity to copy
  * parameters passed by the calling EL (S-EL1 in BL2 & EL3 in BL1) before
  * they are lost (potentially). This needs to be done before the MMU is
@@ -60,7 +72,7 @@
 
 {
 	/* Initialize the console to provide early debug support */
-	rpi3_console_init();
+	rpi3_console_init(PLAT_RPI3_UART_CLK_IN_HZ);
 
 	/*
 	 * In debug builds, a special value is passed in 'arg1' to verify
diff --git a/plat/rpi/rpi3/rpi_mbox_board.c b/plat/rpi/rpi3/rpi_mbox_board.c
new file mode 100644
index 0000000..e7c1e2b
--- /dev/null
+++ b/plat/rpi/rpi3/rpi_mbox_board.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+
+#include <drivers/rpi3/mailbox/rpi3_mbox.h>
+
+#define RPI3_MBOX_BUFFER_SIZE		U(256)
+static uint8_t __aligned(16) rpi3_mbox_buffer[RPI3_MBOX_BUFFER_SIZE];
+
+/*******************************************************************************
+ * Request board revision. Returns the revision and 0 on success, -1 on error.
+ ******************************************************************************/
+int rpi3_vc_hardware_get_board_revision(uint32_t *revision)
+{
+	uint32_t tag_request_size = sizeof(uint32_t);
+	rpi3_mbox_request_t *req = (rpi3_mbox_request_t *) rpi3_mbox_buffer;
+
+	assert(revision != NULL);
+
+	VERBOSE("rpi3: mbox: Sending request at %p\n", (void *)req);
+
+	req->size = sizeof(rpi3_mbox_buffer);
+	req->code = RPI3_MBOX_PROCESS_REQUEST;
+
+	req->tags[0] = RPI3_TAG_HARDWARE_GET_BOARD_REVISION;
+	req->tags[1] = tag_request_size; /* Space available for the response */
+	req->tags[2] = RPI3_TAG_REQUEST;
+	req->tags[3] = 0; /* Placeholder for the response */
+
+	req->tags[4] = RPI3_TAG_END;
+
+	rpi3_vc_mailbox_request_send(req, RPI3_MBOX_BUFFER_SIZE);
+
+	if (req->code != RPI3_MBOX_REQUEST_SUCCESSFUL) {
+		ERROR("rpi3: mbox: Code = 0x%08x\n", req->code);
+		return -1;
+	}
+
+	if (req->tags[2] != (RPI3_TAG_IS_RESPONSE | tag_request_size)) {
+		ERROR("rpi3: mbox: get board revision failed (0x%08x)\n",
+		      req->tags[2]);
+		return -1;
+	}
+
+	*revision = req->tags[3];
+
+	return 0;
+}
diff --git a/plat/rpi/rpi4/aarch64/armstub8_header.S b/plat/rpi/rpi4/aarch64/armstub8_header.S
new file mode 100644
index 0000000..246358d
--- /dev/null
+++ b/plat/rpi/rpi4/aarch64/armstub8_header.S
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * armstub8.bin header to let the GPU firmware recognise this code.
+ * It will then write the load address of the kernel image and the DT
+ * after the header magic in RAM, so we can read those addresses at runtime.
+ */
+
+.text
+	b	armstub8_end
+
+.global stub_magic
+.global dtb_ptr32
+.global kernel_entry32
+
+.org 0xf0
+armstub8:
+stub_magic:
+	.word 0x5afe570b
+stub_version:
+	.word 0
+dtb_ptr32:
+	.word 0x0
+kernel_entry32:
+	.word 0x0
+
+/*
+ * Technically an offset of 0x100 would suffice, but the follow-up code
+ * (bl31_entrypoint.S at BL31_BASE) needs to be page aligned, so pad here
+ * till the end of the first 4K page.
+ */
+.org 0x1000
+armstub8_end:
diff --git a/plat/rpi3/aarch64/plat_helpers.S b/plat/rpi/rpi4/aarch64/plat_helpers.S
similarity index 90%
copy from plat/rpi3/aarch64/plat_helpers.S
copy to plat/rpi/rpi4/aarch64/plat_helpers.S
index 7974b60..46073b7 100644
--- a/plat/rpi3/aarch64/plat_helpers.S
+++ b/plat/rpi/rpi4/aarch64/plat_helpers.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -8,8 +8,9 @@
 #include <asm_macros.S>
 #include <assert_macros.S>
 #include <platform_def.h>
+#include <cortex_a72.h>
 
-#include "../rpi3_hw.h"
+#include "../include/rpi_hw.h"
 
 	.globl	plat_crash_console_flush
 	.globl	plat_crash_console_init
@@ -57,7 +58,7 @@
 func plat_is_my_cpu_primary
 	mrs	x0, mpidr_el1
 	and	x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
-	cmp	x0, #RPI3_PRIMARY_CPU
+	cmp	x0, #RPI4_PRIMARY_CPU
 	cset	w0, eq
 	ret
 endfunc plat_is_my_cpu_primary
@@ -135,7 +136,7 @@
 	 */
 func plat_crash_console_init
 	mov_imm	x0, PLAT_RPI3_UART_BASE
-	mov_imm	x1, PLAT_RPI3_UART_CLK_IN_HZ
+	mov_imm	x1, PLAT_RPI4_VPU_CLK_RATE
 	mov_imm	x2, PLAT_RPI3_UART_BAUDRATE
 	b	console_16550_core_init
 endfunc plat_crash_console_init
@@ -170,10 +171,17 @@
 	 * ---------------------------------------------
 	 */
 func plat_reset_handler
-	/* use the 19.2 MHz clock for the architected timer */
-	mov	x0, #RPI3_INTC_BASE_ADDRESS
-	mov	w1, #0x80000000
-	str	wzr, [x0, #RPI3_INTC_CONTROL_OFFSET]
-	str	w1, [x0, #RPI3_INTC_PRESCALER_OFFSET]
+	/* ------------------------------------------------
+	 * Set L2 read/write cache latency:
+	 * - L2 Data RAM latency: 3 cycles (0b010)
+	 * - L2 Data RAM setup: 1 cycle (bit 5)
+	 * ------------------------------------------------
+	 */
+	mrs	x0, CORTEX_A72_L2CTLR_EL1
+	mov	x1, #0x22
+	orr	x0, x0, x1
+	msr	CORTEX_A72_L2CTLR_EL1, x0
+	isb
+
 	ret
 endfunc plat_reset_handler
diff --git a/plat/rpi/rpi4/include/plat.ld.S b/plat/rpi/rpi4/include/plat.ld.S
new file mode 100644
index 0000000..9262fad
--- /dev/null
+++ b/plat/rpi/rpi4/include/plat.ld.S
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Stub linker script to provide the armstub8.bin header before the actual
+ * code. If the GPU firmware finds a magic value at offset 240 in
+ * armstub8.bin, it will put the DTB and kernel load address in subsequent
+ * words. We can then read those values to find the proper NS entry point
+ * and find our DTB more flexibly.
+ */
+
+MEMORY {
+    PRERAM (rwx): ORIGIN = 0, LENGTH = 4096
+}
+
+SECTIONS
+{
+    .armstub8 . : {
+        *armstub8_header.o(.text*)
+        KEEP(*(.armstub8))
+    } >PRERAM
+}
diff --git a/plat/rpi/rpi4/include/plat_macros.S b/plat/rpi/rpi4/include/plat_macros.S
new file mode 100644
index 0000000..6007d03
--- /dev/null
+++ b/plat/rpi/rpi4/include/plat_macros.S
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef PLAT_MACROS_S
+#define PLAT_MACROS_S
+
+	/* ---------------------------------------------
+	 * The below required platform porting macro
+	 * prints out relevant platform registers
+	 * whenever an unhandled exception is taken in
+	 * BL31.
+	 * Clobbers: x0 - x10, x16, x17, sp
+	 * ---------------------------------------------
+	 */
+	.macro plat_crash_print_regs
+	.endm
+
+#endif /* PLAT_MACROS_S */
diff --git a/plat/rpi/rpi4/include/platform_def.h b/plat/rpi/rpi4/include/platform_def.h
new file mode 100644
index 0000000..a9ecdba
--- /dev/null
+++ b/plat/rpi/rpi4/include/platform_def.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <arch.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <lib/utils_def.h>
+#include <plat/common/common_def.h>
+
+#include "rpi_hw.h"
+
+/* Special value used to verify platform parameters from BL2 to BL31 */
+#define RPI3_BL31_PLAT_PARAM_VAL	ULL(0x0F1E2D3C4B5A6978)
+
+#define PLATFORM_STACK_SIZE		ULL(0x1000)
+
+#define PLATFORM_MAX_CPUS_PER_CLUSTER	U(4)
+#define PLATFORM_CLUSTER_COUNT		U(1)
+#define PLATFORM_CLUSTER0_CORE_COUNT	PLATFORM_MAX_CPUS_PER_CLUSTER
+#define PLATFORM_CORE_COUNT		PLATFORM_CLUSTER0_CORE_COUNT
+
+#define RPI4_PRIMARY_CPU		U(0)
+
+#define PLAT_MAX_PWR_LVL		MPIDR_AFFLVL1
+#define PLAT_NUM_PWR_DOMAINS		(PLATFORM_CLUSTER_COUNT + \
+					 PLATFORM_CORE_COUNT)
+
+#define PLAT_MAX_RET_STATE		U(1)
+#define PLAT_MAX_OFF_STATE		U(2)
+
+/* Local power state for power domains in Run state. */
+#define PLAT_LOCAL_STATE_RUN		U(0)
+/* Local power state for retention. Valid only for CPU power domains */
+#define PLAT_LOCAL_STATE_RET		U(1)
+/*
+ * Local power state for OFF/power-down. Valid for CPU and cluster power
+ * domains.
+ */
+#define PLAT_LOCAL_STATE_OFF		U(2)
+
+/*
+ * Macros used to parse state information from State-ID if it is using the
+ * recommended encoding for State-ID.
+ */
+#define PLAT_LOCAL_PSTATE_WIDTH		U(4)
+#define PLAT_LOCAL_PSTATE_MASK		((U(1) << PLAT_LOCAL_PSTATE_WIDTH) - 1)
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_SHIFT		U(6)
+#define CACHE_WRITEBACK_GRANULE		(U(1) << CACHE_WRITEBACK_SHIFT)
+
+/*
+ * I/O registers.
+ */
+#define DEVICE0_BASE			RPI_IO_BASE
+#define DEVICE0_SIZE			RPI_IO_SIZE
+
+/*
+ * Mailbox to control the secondary cores. All secondary cores are held in a
+ * wait loop in cold boot. To release them perform the following steps (plus
+ * any additional barriers that may be needed):
+ *
+ *     uint64_t *entrypoint = (uint64_t *)PLAT_RPI3_TM_ENTRYPOINT;
+ *     *entrypoint = ADDRESS_TO_JUMP_TO;
+ *
+ *     uint64_t *mbox_entry = (uint64_t *)PLAT_RPI3_TM_HOLD_BASE;
+ *     mbox_entry[cpu_id] = PLAT_RPI3_TM_HOLD_STATE_GO;
+ *
+ *     sev();
+ */
+/* The secure entry point to be used on warm reset by all CPUs. */
+#define PLAT_RPI3_TM_ENTRYPOINT		0x100
+#define PLAT_RPI3_TM_ENTRYPOINT_SIZE	ULL(8)
+
+/* Hold entries for each CPU. */
+#define PLAT_RPI3_TM_HOLD_BASE		(PLAT_RPI3_TM_ENTRYPOINT + \
+					 PLAT_RPI3_TM_ENTRYPOINT_SIZE)
+#define PLAT_RPI3_TM_HOLD_ENTRY_SIZE	ULL(8)
+#define PLAT_RPI3_TM_HOLD_SIZE		(PLAT_RPI3_TM_HOLD_ENTRY_SIZE * \
+					 PLATFORM_CORE_COUNT)
+
+#define PLAT_RPI3_TRUSTED_MAILBOX_SIZE	(PLAT_RPI3_TM_ENTRYPOINT_SIZE + \
+					 PLAT_RPI3_TM_HOLD_SIZE)
+
+#define PLAT_RPI3_TM_HOLD_STATE_WAIT	ULL(0)
+#define PLAT_RPI3_TM_HOLD_STATE_GO	ULL(1)
+
+/*
+ * BL31 specific defines.
+ *
+ * Put BL31 at the top of the Trusted SRAM. BL31_BASE is calculated using the
+ * current BL31 debug size plus a little space for growth.
+ */
+#define PLAT_MAX_BL31_SIZE		ULL(0x80000)
+
+#define BL31_BASE			ULL(0x1000)
+#define BL31_LIMIT			ULL(0x80000)
+#define BL31_PROGBITS_LIMIT		ULL(0x80000)
+
+#define SEC_SRAM_ID			0
+#define SEC_DRAM_ID			1
+
+/*
+ * Other memory-related defines.
+ */
+#define PLAT_PHY_ADDR_SPACE_SIZE	(ULL(1) << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(ULL(1) << 32)
+
+#define MAX_MMAP_REGIONS		8
+#define MAX_XLAT_TABLES			4
+
+#define MAX_IO_DEVICES			U(3)
+#define MAX_IO_HANDLES			U(4)
+
+#define MAX_IO_BLOCK_DEVICES		U(1)
+
+/*
+ * Serial-related constants.
+ */
+#define PLAT_RPI3_UART_BASE		RPI3_MINI_UART_BASE
+#define PLAT_RPI3_UART_BAUDRATE		ULL(115200)
+
+/*
+ * System counter
+ */
+#define SYS_COUNTER_FREQ_IN_TICKS	ULL(54000000)
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/rpi3/rpi3_hw.h b/plat/rpi/rpi4/include/rpi_hw.h
similarity index 67%
copy from plat/rpi3/rpi3_hw.h
copy to plat/rpi/rpi4/include/rpi_hw.h
index 1a86835..ed367ee 100644
--- a/plat/rpi3/rpi3_hw.h
+++ b/plat/rpi/rpi4/include/rpi_hw.h
@@ -1,11 +1,11 @@
 /*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
-#ifndef RPI3_HW_H
-#define RPI3_HW_H
+#ifndef RPI_HW_H
+#define RPI_HW_H
 
 #include <lib/utils_def.h>
 
@@ -13,14 +13,14 @@
  * Peripherals
  */
 
-#define RPI3_IO_BASE			ULL(0x3F000000)
-#define RPI3_IO_SIZE			ULL(0x01000000)
+#define RPI_IO_BASE			ULL(0xFE000000)
+#define RPI_IO_SIZE			ULL(0x02000000)
 
 /*
  * ARM <-> VideoCore mailboxes
  */
 #define RPI3_MBOX_OFFSET		ULL(0x0000B880)
-#define RPI3_MBOX_BASE			(RPI3_IO_BASE + RPI3_MBOX_OFFSET)
+#define RPI3_MBOX_BASE			(RPI_IO_BASE + RPI3_MBOX_OFFSET)
 /* VideoCore -> ARM */
 #define RPI3_MBOX0_READ_OFFSET		ULL(0x00000000)
 #define RPI3_MBOX0_PEEK_OFFSET		ULL(0x00000010)
@@ -41,7 +41,7 @@
  * Power management, reset controller, watchdog.
  */
 #define RPI3_IO_PM_OFFSET		ULL(0x00100000)
-#define RPI3_PM_BASE			(RPI3_IO_BASE + RPI3_IO_PM_OFFSET)
+#define RPI3_PM_BASE			(RPI_IO_BASE + RPI3_IO_PM_OFFSET)
 /* Registers on top of RPI3_PM_BASE. */
 #define RPI3_PM_RSTC_OFFSET		ULL(0x0000001C)
 #define RPI3_PM_RSTS_OFFSET		ULL(0x00000020)
@@ -59,10 +59,17 @@
 #define RPI3_PM_RSTS_WRCFG_HALT		U(0x00000555)
 
 /*
+ * Clock controller
+ */
+#define RPI4_IO_CLOCK_OFFSET		ULL(0x00101000)
+#define RPI4_CLOCK_BASE			(RPI_IO_BASE + RPI4_IO_CLOCK_OFFSET)
+#define RPI4_VPU_CLOCK_DIVIDER		ULL(0x0000000c)
+
+/*
  * Hardware random number generator.
  */
 #define RPI3_IO_RNG_OFFSET		ULL(0x00104000)
-#define RPI3_RNG_BASE			(RPI3_IO_BASE + RPI3_IO_RNG_OFFSET)
+#define RPI3_RNG_BASE			(RPI_IO_BASE + RPI3_IO_RNG_OFFSET)
 #define RPI3_RNG_CTRL_OFFSET		ULL(0x00000000)
 #define RPI3_RNG_STATUS_OFFSET		ULL(0x00000004)
 #define RPI3_RNG_DATA_OFFSET		ULL(0x00000008)
@@ -77,34 +84,32 @@
 #define RPI3_RNG_INT_MASK_DISABLE	U(0x1)
 
 /*
- * Serial port (called 'Mini UART' in the BCM docucmentation).
+ * Serial port (called 'Mini UART' in the Broadcom documentation).
  */
 #define RPI3_IO_MINI_UART_OFFSET	ULL(0x00215040)
-#define RPI3_MINI_UART_BASE		(RPI3_IO_BASE + RPI3_IO_MINI_UART_OFFSET)
-#define RPI3_MINI_UART_CLK_IN_HZ	ULL(500000000)
+#define RPI3_MINI_UART_BASE		(RPI_IO_BASE + RPI3_IO_MINI_UART_OFFSET)
+#define PLAT_RPI4_VPU_CLK_RATE		ULL(1000000000)
 
 /*
  * GPIO controller
  */
 #define RPI3_IO_GPIO_OFFSET		ULL(0x00200000)
-#define RPI3_GPIO_BASE			(RPI3_IO_BASE + RPI3_IO_GPIO_OFFSET)
+#define RPI3_GPIO_BASE			(RPI_IO_BASE + RPI3_IO_GPIO_OFFSET)
 
 /*
  * SDHost controller
  */
 #define RPI3_IO_SDHOST_OFFSET           ULL(0x00202000)
-#define RPI3_SDHOST_BASE                (RPI3_IO_BASE + RPI3_IO_SDHOST_OFFSET)
+#define RPI3_SDHOST_BASE                (RPI_IO_BASE + RPI3_IO_SDHOST_OFFSET)
 
 /*
- * Local interrupt controller
+ * GIC interrupt controller
  */
-#define RPI3_INTC_BASE_ADDRESS			ULL(0x40000000)
-/* Registers on top of RPI3_INTC_BASE_ADDRESS */
-#define RPI3_INTC_CONTROL_OFFSET		ULL(0x00000000)
-#define RPI3_INTC_PRESCALER_OFFSET		ULL(0x00000008)
-#define RPI3_INTC_MBOX_CONTROL_OFFSET		ULL(0x00000050)
-#define RPI3_INTC_MBOX_CONTROL_SLOT3_FIQ	ULL(0x00000080)
-#define RPI3_INTC_PENDING_FIQ_OFFSET		ULL(0x00000070)
-#define RPI3_INTC_PENDING_FIQ_MBOX3		ULL(0x00000080)
+#define RPI_HAVE_GIC
+#define RPI4_GIC_GICD_BASE		ULL(0xff841000)
+#define RPI4_GIC_GICC_BASE		ULL(0xff842000)
 
-#endif /* RPI3_HW_H */
+#define	RPI4_LOCAL_CONTROL_BASE_ADDRESS		ULL(0xff800000)
+#define	RPI4_LOCAL_CONTROL_PRESCALER		ULL(0xff800008)
+
+#endif /* RPI_HW_H */
diff --git a/plat/rpi/rpi4/platform.mk b/plat/rpi/rpi4/platform.mk
new file mode 100644
index 0000000..2038021
--- /dev/null
+++ b/plat/rpi/rpi4/platform.mk
@@ -0,0 +1,103 @@
+#
+# Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+include lib/libfdt/libfdt.mk
+include lib/xlat_tables_v2/xlat_tables.mk
+
+PLAT_INCLUDES		:=	-Iplat/rpi/common/include		\
+				-Iplat/rpi/rpi4/include
+
+PLAT_BL_COMMON_SOURCES	:=	drivers/ti/uart/aarch64/16550_console.S	\
+				plat/rpi/common/rpi3_common.c		\
+				${XLAT_TABLES_LIB_SRCS}
+
+BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a72.S		\
+				plat/rpi/rpi4/aarch64/plat_helpers.S	\
+				plat/rpi/rpi4/aarch64/armstub8_header.S	\
+				drivers/arm/gic/common/gic_common.c     \
+				drivers/arm/gic/v2/gicv2_helpers.c      \
+				drivers/arm/gic/v2/gicv2_main.c         \
+				plat/common/plat_gicv2.c                \
+				plat/rpi/rpi4/rpi4_bl31_setup.c		\
+				plat/rpi/common/rpi3_pm.c		\
+				plat/common/plat_psci_common.c		\
+				plat/rpi/common/rpi3_topology.c		\
+				common/fdt_fixup.c			\
+				${LIBFDT_SRCS}
+
+# For now we only support BL31, using the kernel loaded by the GPU firmware.
+RESET_TO_BL31		:=	1
+
+# All CPUs enter armstub8.bin.
+COLD_BOOT_SINGLE_CPU	:=	0
+
+# Tune compiler for Cortex-A72
+ifeq ($(notdir $(CC)),armclang)
+    TF_CFLAGS_aarch64	+=	-mcpu=cortex-a72
+else ifneq ($(findstring clang,$(notdir $(CC))),)
+    TF_CFLAGS_aarch64	+=	-mcpu=cortex-a72
+else
+    TF_CFLAGS_aarch64	+=	-mtune=cortex-a72
+endif
+
+# Add support for platform supplied linker script for BL31 build
+$(eval $(call add_define,PLAT_EXTRA_LD_SCRIPT))
+
+# Enable all errata workarounds for Cortex-A72
+ERRATA_A72_859971		:= 1
+
+WORKAROUND_CVE_2017_5715	:= 1
+
+# Add new default target when compiling this platform
+all: bl31
+
+# Build config flags
+# ------------------
+
+# Disable stack protector by default
+ENABLE_STACK_PROTECTOR	 	:= 0
+
+# Have different sections for code and rodata
+SEPARATE_CODE_AND_RODATA	:= 1
+
+# Use Coherent memory
+USE_COHERENT_MEM		:= 1
+
+# Platform build flags
+# --------------------
+
+# There is not much else than a Linux kernel to load at the moment.
+RPI3_DIRECT_LINUX_BOOT		:= 1
+
+# BL33 images are in AArch64 by default
+RPI3_BL33_IN_AARCH32		:= 0
+
+# UART to use at runtime. -1 means the runtime UART is disabled.
+# Any other value means the default UART will be used.
+RPI3_RUNTIME_UART		:= 0
+
+# Use normal memory mapping for ROM, FIP, SRAM and DRAM
+RPI3_USE_UEFI_MAP		:= 0
+
+# Process platform flags
+# ----------------------
+
+$(eval $(call add_define,RPI3_BL33_IN_AARCH32))
+$(eval $(call add_define,RPI3_DIRECT_LINUX_BOOT))
+ifdef RPI3_PRELOADED_DTB_BASE
+$(eval $(call add_define,RPI3_PRELOADED_DTB_BASE))
+endif
+$(eval $(call add_define,RPI3_RUNTIME_UART))
+$(eval $(call add_define,RPI3_USE_UEFI_MAP))
+
+ifeq (${ARCH},aarch32)
+  $(error Error: AArch32 not supported on rpi4)
+endif
+
+ifneq ($(ENABLE_STACK_PROTECTOR), 0)
+PLAT_BL_COMMON_SOURCES	+=	drivers/rpi3/rng/rpi3_rng.c		\
+				plat/rpi/common/rpi3_stack_protector.c
+endif
diff --git a/plat/rpi/rpi4/rpi4_bl31_setup.c b/plat/rpi/rpi4/rpi4_bl31_setup.c
new file mode 100644
index 0000000..53ab0c2
--- /dev/null
+++ b/plat/rpi/rpi4/rpi4_bl31_setup.c
@@ -0,0 +1,278 @@
+/*
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <libfdt.h>
+
+#include <platform_def.h>
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_mmu_helpers.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <plat/common/platform.h>
+#include <common/fdt_fixup.h>
+#include <libfdt.h>
+
+#include <drivers/arm/gicv2.h>
+
+#include <rpi_shared.h>
+
+/*
+ * Fields at the beginning of armstub8.bin.
+ * While building the BL31 image, we put the stub magic into the binary.
+ * The GPU firmware detects this at boot time, clears that field as a
+ * confirmation and puts the kernel and DT address in the following words.
+ */
+extern uint32_t stub_magic;
+extern uint32_t dtb_ptr32;
+extern uint32_t kernel_entry32;
+
+static const gicv2_driver_data_t rpi4_gic_data = {
+	.gicd_base = RPI4_GIC_GICD_BASE,
+	.gicc_base = RPI4_GIC_GICC_BASE,
+};
+
+/*
+ * To be filled by the code below. At the moment BL32 is not supported.
+ * In the future these might be passed down from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for
+ * the security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+	entry_point_info_t *next_image_info;
+
+	assert(sec_state_is_valid(type) != 0);
+
+	next_image_info = (type == NON_SECURE)
+			? &bl33_image_ep_info : &bl32_image_ep_info;
+
+	/* None of the images can have 0x0 as the entrypoint. */
+	if (next_image_info->pc) {
+		return next_image_info;
+	} else {
+		return NULL;
+	}
+}
+
+uintptr_t plat_get_ns_image_entrypoint(void)
+{
+#ifdef PRELOADED_BL33_BASE
+	return PRELOADED_BL33_BASE;
+#else
+	/* Cleared by the GPU if kernel address is valid. */
+	if (stub_magic == 0)
+		return kernel_entry32;
+
+	WARN("Stub magic failure, using default kernel address 0x80000\n");
+	return 0x80000;
+#endif
+}
+
+static uintptr_t rpi4_get_dtb_address(void)
+{
+#ifdef RPI3_PRELOADED_DTB_BASE
+	return RPI3_PRELOADED_DTB_BASE;
+#else
+	/* Cleared by the GPU if DTB address is valid. */
+	if (stub_magic == 0)
+		return dtb_ptr32;
+
+	WARN("Stub magic failure, DTB address unknown\n");
+	return 0;
+#endif
+}
+
+static void ldelay(register_t delay)
+{
+	__asm__ volatile (
+		"1:\tcbz %0, 2f\n\t"
+		"sub %0, %0, #1\n\t"
+		"b 1b\n"
+		"2:"
+		: "=&r" (delay) : "0" (delay)
+	);
+}
+
+/*******************************************************************************
+ * Perform any BL31 early platform setup. Here is an opportunity to copy
+ * parameters passed by the calling EL (S-EL1 in BL2 & EL3 in BL1) before
+ * they are lost (potentially). This needs to be done before the MMU is
+ * initialized so that the memory layout can be used while creating page
+ * tables. BL2 has flushed this information to memory, so we are guaranteed
+ * to pick up good data.
+ ******************************************************************************/
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+				u_register_t arg2, u_register_t arg3)
+
+{
+	uint32_t div_reg;
+
+	/*
+	 * LOCAL_CONTROL:
+	 * Bit 9 clear: Increment by 1 (vs. 2).
+	 * Bit 8 clear: Timer source is 19.2MHz crystal (vs. APB).
+	 */
+	mmio_write_32(RPI4_LOCAL_CONTROL_BASE_ADDRESS, 0);
+
+	/* LOCAL_PRESCALER; divide-by (0x80000000 / register_val) == 1 */
+	mmio_write_32(RPI4_LOCAL_CONTROL_PRESCALER, 0x80000000);
+
+	/* Early GPU firmware revisions need a little break here. */
+	ldelay(100000);
+
+	/*
+	 * Initialize the console to provide early debug support.
+	 * Different GPU firmware revisions set up the VPU divider differently,
+	 * so read the actual divider register to learn the UART base clock
+	 * rate. The divider is encoded as a 12.12 fixed point number, but we
+	 * just care about the integer part of it.
+	 */
+	div_reg = mmio_read_32(RPI4_CLOCK_BASE + RPI4_VPU_CLOCK_DIVIDER);
+	div_reg = (div_reg >> 12) & 0xfff;
+	if (div_reg == 0)
+		div_reg = 1;
+	rpi3_console_init(PLAT_RPI4_VPU_CLK_RATE / div_reg);
+
+	bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
+	bl33_image_ep_info.spsr = rpi3_get_spsr_for_bl33_entry();
+	SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+
+#if RPI3_DIRECT_LINUX_BOOT
+# if RPI3_BL33_IN_AARCH32
+	/*
+	 * According to the file ``Documentation/arm/Booting`` of the Linux
+	 * kernel tree, Linux expects:
+	 * r0 = 0
+	 * r1 = machine type number, optional in DT-only platforms (~0 if so)
+	 * r2 = Physical address of the device tree blob
+	 */
+	VERBOSE("rpi4: Preparing to boot 32-bit Linux kernel\n");
+	bl33_image_ep_info.args.arg0 = 0U;
+	bl33_image_ep_info.args.arg1 = ~0U;
+	bl33_image_ep_info.args.arg2 = rpi4_get_dtb_address();
+# else
+	/*
+	 * According to the file ``Documentation/arm64/booting.txt`` of the
+	 * Linux kernel tree, Linux expects the physical address of the device
+	 * tree blob (DTB) in x0, while x1-x3 are reserved for future use and
+	 * must be 0.
+	 */
+	VERBOSE("rpi4: Preparing to boot 64-bit Linux kernel\n");
+	bl33_image_ep_info.args.arg0 = rpi4_get_dtb_address();
+	bl33_image_ep_info.args.arg1 = 0ULL;
+	bl33_image_ep_info.args.arg2 = 0ULL;
+	bl33_image_ep_info.args.arg3 = 0ULL;
+# endif /* RPI3_BL33_IN_AARCH32 */
+#endif /* RPI3_DIRECT_LINUX_BOOT */
+}
+
+void bl31_plat_arch_setup(void)
+{
+	/*
+	 * Is the dtb_ptr32 pointer valid? If yes, map the DTB region.
+	 * We map the 2MB region the DTB start address lives in, plus
+	 * the next 2MB, to have enough room for expansion.
+	 */
+	if (stub_magic == 0) {
+		unsigned long long dtb_region = dtb_ptr32;
+
+		dtb_region &= ~0x1fffff;	/* Align to 2 MB. */
+		mmap_add_region(dtb_region, dtb_region, 4U << 20,
+				MT_MEMORY | MT_RW | MT_NS);
+	}
+	/*
+	 * Add the first page of memory, which holds the stub magic,
+	 * the kernel and the DT address.
+	 * This also holds the secondary CPU's entrypoints and mailboxes.
+	 */
+	mmap_add_region(0, 0, 4096, MT_NON_CACHEABLE | MT_RW | MT_SECURE);
+
+	rpi3_setup_page_tables(BL31_BASE, BL31_END - BL31_BASE,
+			       BL_CODE_BASE, BL_CODE_END,
+			       BL_RO_DATA_BASE, BL_RO_DATA_END
+#if USE_COHERENT_MEM
+			       , BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END
+#endif
+			      );
+
+	enable_mmu_el3(0);
+}
+
+static uint32_t dtb_size(const void *dtb)
+{
+	const uint32_t *dtb_header = dtb;
+
+	return fdt32_to_cpu(dtb_header[1]);
+}
+
+static void rpi4_prepare_dtb(void)
+{
+	void *dtb = (void *)rpi4_get_dtb_address();
+	uint32_t gic_int_prop[3];
+	int ret, offs;
+
+	/* Return if no device tree is detected */
+	if (fdt_check_header(dtb) != 0)
+		return;
+
+	ret = fdt_open_into(dtb, dtb, 0x100000);
+	if (ret < 0) {
+		ERROR("Invalid Device Tree at %p: error %d\n", dtb, ret);
+		return;
+	}
+
+	if (dt_add_psci_node(dtb)) {
+		ERROR("Failed to add PSCI Device Tree node\n");
+		return;
+	}
+
+	if (dt_add_psci_cpu_enable_methods(dtb)) {
+		ERROR("Failed to add PSCI cpu enable methods in Device Tree\n");
+		return;
+	}
+
+	/* Reserve memory used by Trusted Firmware. */
+	if (fdt_add_reserved_memory(dtb, "atf@0", 0, 0x80000))
+		WARN("Failed to add reserved memory nodes to DT.\n");
+
+	offs = fdt_node_offset_by_compatible(dtb, 0, "arm,gic-400");
+	gic_int_prop[0] = cpu_to_fdt32(1);		// PPI
+	gic_int_prop[1] = cpu_to_fdt32(9);		// PPI #9
+	gic_int_prop[2] = cpu_to_fdt32(0x0f04);		// all cores, level high
+	fdt_setprop(dtb, offs, "interrupts", gic_int_prop, 12);
+
+	offs = fdt_path_offset(dtb, "/chosen");
+	fdt_setprop_string(dtb, offs, "stdout-path", "serial0");
+
+	ret = fdt_pack(dtb);
+	if (ret < 0)
+		ERROR("Failed to pack Device Tree at %p: error %d\n", dtb, ret);
+
+	clean_dcache_range((uintptr_t)dtb, dtb_size(dtb));
+	INFO("Changed device tree to advertise PSCI.\n");
+}
+
+void bl31_platform_setup(void)
+{
+	rpi4_prepare_dtb();
+
+	/* Configure the interrupt controller */
+	gicv2_driver_init(&rpi4_gic_data);
+	gicv2_distif_init();
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+}
diff --git a/plat/rpi3/rpi3_mbox.c b/plat/rpi3/rpi3_mbox.c
deleted file mode 100644
index 2db605e..0000000
--- a/plat/rpi3/rpi3_mbox.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <assert.h>
-
-#include <platform_def.h>
-
-#include <arch_helpers.h>
-#include <common/debug.h>
-#include <lib/mmio.h>
-
-#include "rpi3_hw.h"
-
-/* This struct must be aligned to 16 bytes */
-typedef struct __packed __aligned(16) rpi3_mbox_request {
-	uint32_t	size; /* Buffer size in bytes */
-	uint32_t	code; /* Request/response code */
-	uint32_t	tags[0];
-} rpi3_mbox_request_t;
-
-#define RPI3_MBOX_BUFFER_SIZE		U(256)
-static uint8_t __aligned(16) rpi3_mbox_buffer[RPI3_MBOX_BUFFER_SIZE];
-
-/* Constants to perform a request/check the status of a request. */
-#define RPI3_MBOX_PROCESS_REQUEST	U(0x00000000)
-#define RPI3_MBOX_REQUEST_SUCCESSFUL	U(0x80000000)
-#define RPI3_MBOX_REQUEST_ERROR		U(0x80000001)
-
-/* Command constants */
-#define RPI3_TAG_HARDWARE_GET_BOARD_REVISION	U(0x00010002)
-#define RPI3_TAG_END				U(0x00000000)
-
-#define RPI3_TAG_REQUEST		U(0x00000000)
-#define RPI3_TAG_IS_RESPONSE		U(0x80000000) /* Set if response */
-#define RPI3_TAG_RESPONSE_LENGTH_MASK	U(0x7FFFFFFF)
-
-#define RPI3_CHANNEL_ARM_TO_VC		U(0x8)
-#define RPI3_CHANNEL_MASK		U(0xF)
-
-#define RPI3_MAILBOX_MAX_RETRIES	U(1000000)
-
-/*******************************************************************************
- * Helpers to send requests to the VideoCore using the mailboxes.
- ******************************************************************************/
-static void rpi3_vc_mailbox_request_send(void)
-{
-	uint32_t st, data;
-	uintptr_t resp_addr, addr;
-	unsigned int retries;
-
-	/* This is the location of the request buffer */
-	addr = (uintptr_t) &rpi3_mbox_buffer;
-
-	/* Make sure that the changes are seen by the VideoCore */
-	flush_dcache_range(addr, RPI3_MBOX_BUFFER_SIZE);
-
-	/* Wait until the outbound mailbox is empty */
-	retries = 0U;
-
-	do {
-		st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX1_STATUS_OFFSET);
-
-		retries++;
-		if (retries == RPI3_MAILBOX_MAX_RETRIES) {
-			ERROR("rpi3: mbox: Send request timeout\n");
-			return;
-		}
-
-	} while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) == 0U);
-
-	/* Send base address of this message to start request */
-	mmio_write_32(RPI3_MBOX_BASE + RPI3_MBOX1_WRITE_OFFSET,
-		      RPI3_CHANNEL_ARM_TO_VC | (uint32_t) addr);
-
-	/* Wait until the inbound mailbox isn't empty */
-	retries = 0U;
-
-	do {
-		st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_STATUS_OFFSET);
-
-		retries++;
-		if (retries == RPI3_MAILBOX_MAX_RETRIES) {
-			ERROR("rpi3: mbox: Receive response timeout\n");
-			return;
-		}
-
-	} while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) != 0U);
-
-	/* Get location and channel */
-	data = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_READ_OFFSET);
-
-	if ((data & RPI3_CHANNEL_MASK) != RPI3_CHANNEL_ARM_TO_VC) {
-		ERROR("rpi3: mbox: Wrong channel: 0x%08x\n", data);
-		panic();
-	}
-
-	resp_addr = (uintptr_t)(data & ~RPI3_CHANNEL_MASK);
-	if (addr != resp_addr) {
-		ERROR("rpi3: mbox: Unexpected address: 0x%08x\n", data);
-		panic();
-	}
-
-	/* Make sure that the data seen by the CPU is up to date */
-	inv_dcache_range(addr, RPI3_MBOX_BUFFER_SIZE);
-}
-
-/*******************************************************************************
- * Request board revision. Returns the revision and 0 on success, -1 on error.
- ******************************************************************************/
-int rpi3_vc_hardware_get_board_revision(uint32_t *revision)
-{
-	uint32_t tag_request_size = sizeof(uint32_t);
-	rpi3_mbox_request_t *req = (rpi3_mbox_request_t *) rpi3_mbox_buffer;
-
-	assert(revision != NULL);
-
-	VERBOSE("rpi3: mbox: Sending request at %p\n", (void *)req);
-
-	req->size = sizeof(rpi3_mbox_buffer);
-	req->code = RPI3_MBOX_PROCESS_REQUEST;
-
-	req->tags[0] = RPI3_TAG_HARDWARE_GET_BOARD_REVISION;
-	req->tags[1] = tag_request_size; /* Space available for the response */
-	req->tags[2] = RPI3_TAG_REQUEST;
-	req->tags[3] = 0; /* Placeholder for the response */
-
-	req->tags[4] = RPI3_TAG_END;
-
-	rpi3_vc_mailbox_request_send();
-
-	if (req->code != RPI3_MBOX_REQUEST_SUCCESSFUL) {
-		ERROR("rpi3: mbox: Code = 0x%08x\n", req->code);
-		return -1;
-	}
-
-	if (req->tags[2] != (RPI3_TAG_IS_RESPONSE | tag_request_size)) {
-		ERROR("rpi3: mbox: get board revision failed (0x%08x)\n",
-		      req->tags[2]);
-		return -1;
-	}
-
-	*revision = req->tags[3];
-
-	return 0;
-}
diff --git a/plat/st/common/include/stm32mp_auth.h b/plat/st/common/include/stm32mp_auth.h
new file mode 100644
index 0000000..3075d18
--- /dev/null
+++ b/plat/st/common/include/stm32mp_auth.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef STM32MP_AUTH_H
+#define STM32MP_AUTH_H
+
+struct stm32mp_auth_ops {
+	uint32_t (*check_key)(uint8_t *pubkey_in, uint8_t *pubkey_out);
+	uint32_t (*verify_signature)(uint8_t *hash_in, uint8_t *pubkey_in,
+				     uint8_t *signature, uint32_t ecc_algo);
+};
+
+void stm32mp_init_auth(struct stm32mp_auth_ops *init_ptr);
+int stm32mp_auth_image(boot_api_image_header_t *header, uintptr_t buffer);
+
+#endif /* STM32MP_AUTH_H */
diff --git a/plat/st/common/include/stm32mp_common.h b/plat/st/common/include/stm32mp_common.h
index e20308e..59657fd 100644
--- a/plat/st/common/include/stm32mp_common.h
+++ b/plat/st/common/include/stm32mp_common.h
@@ -19,6 +19,7 @@
 uintptr_t stm32mp_get_boot_ctx_address(void);
 
 bool stm32mp_is_single_core(void);
+bool stm32mp_is_closed_device(void);
 
 /* Return the base address of the DDR controller */
 uintptr_t stm32mp_ddrctrl_base(void);
diff --git a/plat/st/common/stm32mp_auth.c b/plat/st/common/stm32mp_auth.c
new file mode 100644
index 0000000..0ef6d54
--- /dev/null
+++ b/plat/st/common/stm32mp_auth.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2019, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <platform_def.h>
+
+#include <common/debug.h>
+#include <drivers/io/io_storage.h>
+#include <drivers/st/bsec.h>
+#include <drivers/st/stm32_hash.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <plat/common/platform.h>
+
+static const struct stm32mp_auth_ops *auth_ops;
+
+void stm32mp_init_auth(struct stm32mp_auth_ops *init_ptr)
+{
+	if ((init_ptr == NULL) ||
+	    (init_ptr->check_key == NULL) ||
+	    (init_ptr->verify_signature == NULL) ||
+	    (stm32_hash_register() != 0)) {
+		panic();
+	}
+
+	auth_ops = init_ptr;
+}
+
+int stm32mp_auth_image(boot_api_image_header_t *header, uintptr_t buffer)
+{
+	int ret;
+	uint8_t image_hash[BOOT_API_SHA256_DIGEST_SIZE_IN_BYTES];
+	uint32_t header_skip_cksum = sizeof(header->magic) +
+				     sizeof(header->image_signature) +
+				     sizeof(header->payload_checksum);
+
+	/* Check Security Status */
+	if (!stm32mp_is_closed_device()) {
+		if (header->option_flags != 0U) {
+			WARN("Skip signature check (header option)\n");
+			return 0;
+		}
+		INFO("Check signature on Open device\n");
+	}
+
+	ret = mmap_add_dynamic_region(STM32MP_ROM_BASE, STM32MP_ROM_BASE,
+				      STM32MP_ROM_SIZE, MT_CODE | MT_SECURE);
+	if (ret != 0) {
+		return ret;
+	}
+
+	/* Check Public Key */
+	if (auth_ops->check_key(header->ecc_pubk, NULL) != BOOT_API_RETURN_OK) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* Compute end of header hash and payload hash */
+	stm32_hash_init(HASH_SHA256);
+
+	ret = stm32_hash_update((uint8_t *)&header->header_version,
+				sizeof(boot_api_image_header_t) -
+				header_skip_cksum);
+	if (ret != 0) {
+		ERROR("Hash of header failed, %i\n", ret);
+		goto err;
+	}
+
+	ret = stm32_hash_final_update((uint8_t *)buffer,
+			       header->image_length, image_hash);
+	if (ret != 0) {
+		ERROR("Hash of payload failed\n");
+		goto err;
+	}
+
+	/* Verify signature */
+	if (auth_ops->verify_signature(image_hash, header->ecc_pubk,
+				       header->image_signature,
+				       header->ecc_algo_type) !=
+	    BOOT_API_RETURN_OK) {
+		ret = -EINVAL;
+	}
+
+err:
+	mmap_remove_dynamic_region(STM32MP_ROM_BASE, STM32MP_ROM_SIZE);
+	return ret;
+}
diff --git a/plat/st/stm32mp1/bl2_plat_setup.c b/plat/st/stm32mp1/bl2_plat_setup.c
index c6aefe3..d9e29b4 100644
--- a/plat/st/stm32mp1/bl2_plat_setup.c
+++ b/plat/st/stm32mp1/bl2_plat_setup.c
@@ -32,6 +32,7 @@
 #include <stm32mp1_dbgmcu.h>
 
 static struct console_stm32 console;
+static struct stm32mp_auth_ops stm32mp1_auth_ops;
 
 static void print_reset_reason(void)
 {
@@ -284,6 +285,12 @@
 
 	stm32mp_print_boardinfo();
 
+	if (boot_context->auth_status != BOOT_API_CTX_AUTH_NO) {
+		NOTICE("Bootrom authentication %s\n",
+		       (boot_context->auth_status == BOOT_API_CTX_AUTH_FAILED) ?
+		       "failed" : "succeeded");
+	}
+
 skip_console_init:
 	if (stm32_iwdg_init() < 0) {
 		panic();
@@ -302,6 +309,12 @@
 		ERROR("Cannot save boot interface\n");
 	}
 
+	stm32mp1_auth_ops.check_key = boot_context->bootrom_ecdsa_check_key;
+	stm32mp1_auth_ops.verify_signature =
+		boot_context->bootrom_ecdsa_verify_signature;
+
+	stm32mp_init_auth(&stm32mp1_auth_ops);
+
 	stm32mp1_arch_security_setup();
 
 	print_reset_reason();
diff --git a/plat/st/stm32mp1/include/boot_api.h b/plat/st/stm32mp1/include/boot_api.h
index c841a74..2284970 100644
--- a/plat/st/stm32mp1/include/boot_api.h
+++ b/plat/st/stm32mp1/include/boot_api.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017-2018, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2017-2019, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -11,6 +11,16 @@
 #include <stdio.h>
 
 /*
+ * Possible value of boot context field 'auth_status'
+ */
+/* No authentication done */
+#define BOOT_API_CTX_AUTH_NO					0x0U
+/* Authentication done and failed */
+#define BOOT_API_CTX_AUTH_FAILED				0x1U
+/* Authentication done and succeeded */
+#define BOOT_API_CTX_AUTH_SUCCESS				0x2U
+
+/*
  * Possible value of boot context field 'boot_interface_sel'
  */
 
@@ -114,6 +124,8 @@
 /* Closed = OTP_CFG0[6] */
 #define BOOT_API_OTP_MODE_CLOSED_BIT_POS			6
 
+#define BOOT_API_RETURN_OK					0x66U
+
 /*
  * Boot Context related definitions
  */
@@ -132,7 +144,27 @@
 	uint16_t boot_interface_instance;
 	uint32_t reserved1[13];
 	uint32_t otp_afmux_values[3];
-	uint32_t reserved[9];
+	uint32_t reserved[5];
+	uint32_t auth_status;
+
+	/*
+	 * Pointers to bootROM External Secure Services
+	 * - ECDSA check key
+	 * - ECDSA verify signature
+	 * - ECDSA verify signature and go
+	 */
+	uint32_t (*bootrom_ecdsa_check_key)(uint8_t *pubkey_in,
+					    uint8_t *pubkey_out);
+	uint32_t (*bootrom_ecdsa_verify_signature)(uint8_t *hash_in,
+						   uint8_t *pubkey_in,
+						   uint8_t *signature,
+						   uint32_t ecc_algo);
+	uint32_t (*bootrom_ecdsa_verify_and_go)(uint8_t *hash_in,
+						uint8_t *pub_key_in,
+						uint8_t *signature,
+						uint32_t ecc_algo,
+						uint32_t *entry_in);
+
 	/*
 	 * Information specific to an SD boot
 	 * Updated each time an SD boot is at least attempted,
diff --git a/plat/st/stm32mp1/platform.mk b/plat/st/stm32mp1/platform.mk
index 83d9770..90b3e3c 100644
--- a/plat/st/stm32mp1/platform.mk
+++ b/plat/st/stm32mp1/platform.mk
@@ -71,7 +71,9 @@
 BL2_SOURCES		+=	drivers/io/io_block.c					\
 				drivers/io/io_dummy.c					\
 				drivers/io/io_storage.c					\
+				drivers/st/crypto/stm32_hash.c				\
 				drivers/st/io/io_stm32image.c				\
+				plat/st/common/stm32mp_auth.c				\
 				plat/st/common/bl2_io_storage.c				\
 				plat/st/stm32mp1/bl2_plat_setup.c
 
@@ -103,6 +105,8 @@
 STM32_TF_DTBFILE	:=      ${BUILD_PLAT}/fdts/${DTB_FILE_NAME}
 STM32_TF_OBJS		:=	${BUILD_PLAT}/stm32mp1.o
 
+BL2_CFLAGS	+=	-DPLAT_XLAT_TABLES_DYNAMIC=1
+
 # Variables for use with stm32image
 STM32IMAGEPATH		?= tools/stm32image
 STM32IMAGE		?= ${STM32IMAGEPATH}/stm32image${BIN_EXT}
diff --git a/plat/st/stm32mp1/stm32mp1_def.h b/plat/st/stm32mp1/stm32mp1_def.h
index 0eba8a6..a40852b 100644
--- a/plat/st/stm32mp1/stm32mp1_def.h
+++ b/plat/st/stm32mp1/stm32mp1_def.h
@@ -19,6 +19,7 @@
 #include <drivers/st/stm32mp1_clk.h>
 
 #include <boot_api.h>
+#include <stm32mp_auth.h>
 #include <stm32mp_common.h>
 #include <stm32mp_dt.h>
 #include <stm32mp_shres_helpers.h>
@@ -49,6 +50,8 @@
 /*******************************************************************************
  * STM32MP1 memory map related constants
  ******************************************************************************/
+#define STM32MP_ROM_BASE		U(0x00000000)
+#define STM32MP_ROM_SIZE		U(0x00020000)
 
 #define STM32MP_SYSRAM_BASE		U(0x2FFC0000)
 #define STM32MP_SYSRAM_SIZE		U(0x00040000)
diff --git a/plat/st/stm32mp1/stm32mp1_private.c b/plat/st/stm32mp1/stm32mp1_private.c
index 38ebcef..e2dcd2a 100644
--- a/plat/st/stm32mp1/stm32mp1_private.c
+++ b/plat/st/stm32mp1/stm32mp1_private.c
@@ -278,6 +278,19 @@
 	return ret;
 }
 
+/* Return true when device is in closed state */
+bool stm32mp_is_closed_device(void)
+{
+	uint32_t value;
+
+	if ((bsec_shadow_register(DATA0_OTP) != BSEC_OK) ||
+	    (bsec_read_otp(&value, DATA0_OTP) != BSEC_OK)) {
+		return true;
+	}
+
+	return (value & DATA0_OTP_SECURED) == DATA0_OTP_SECURED;
+}
+
 uint32_t stm32_iwdg_get_instance(uintptr_t base)
 {
 	switch (base) {