blob: 5aea95a0c0845370eafed79021464a2821b4472f [file] [log] [blame]
/*
* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef CCI_H
#define CCI_H
#include <lib/utils_def.h>
/* Slave interface offsets from PERIPHBASE */
#define SLAVE_IFACE6_OFFSET UL(0x7000)
#define SLAVE_IFACE5_OFFSET UL(0x6000)
#define SLAVE_IFACE4_OFFSET UL(0x5000)
#define SLAVE_IFACE3_OFFSET UL(0x4000)
#define SLAVE_IFACE2_OFFSET UL(0x3000)
#define SLAVE_IFACE1_OFFSET UL(0x2000)
#define SLAVE_IFACE0_OFFSET UL(0x1000)
#define SLAVE_IFACE_OFFSET(index) (SLAVE_IFACE0_OFFSET + \
(UL(0x1000) * (index)))
/* Slave interface event and count register offsets from PERIPHBASE */
#define EVENT_SELECT7_OFFSET UL(0x80000)
#define EVENT_SELECT6_OFFSET UL(0x70000)
#define EVENT_SELECT5_OFFSET UL(0x60000)
#define EVENT_SELECT4_OFFSET UL(0x50000)
#define EVENT_SELECT3_OFFSET UL(0x40000)
#define EVENT_SELECT2_OFFSET UL(0x30000)
#define EVENT_SELECT1_OFFSET UL(0x20000)
#define EVENT_SELECT0_OFFSET UL(0x10000)
#define EVENT_OFFSET(index) (EVENT_SELECT0_OFFSET + \
(UL(0x10000) * (index)))
/* Control and ID register offsets */
#define CTRL_OVERRIDE_REG U(0x0)
#define SECURE_ACCESS_REG U(0x8)
#define STATUS_REG U(0xc)
#define IMPRECISE_ERR_REG U(0x10)
#define PERFMON_CTRL_REG U(0x100)
#define IFACE_MON_CTRL_REG U(0x104)
/* Component and peripheral ID registers */
#define PERIPHERAL_ID0 U(0xFE0)
#define PERIPHERAL_ID1 U(0xFE4)
#define PERIPHERAL_ID2 U(0xFE8)
#define PERIPHERAL_ID3 U(0xFEC)
#define PERIPHERAL_ID4 U(0xFD0)
#define PERIPHERAL_ID5 U(0xFD4)
#define PERIPHERAL_ID6 U(0xFD8)
#define PERIPHERAL_ID7 U(0xFDC)
#define COMPONENT_ID0 U(0xFF0)
#define COMPONENT_ID1 U(0xFF4)
#define COMPONENT_ID2 U(0xFF8)
#define COMPONENT_ID3 U(0xFFC)
#define COMPONENT_ID4 U(0x1000)
#define COMPONENT_ID5 U(0x1004)
#define COMPONENT_ID6 U(0x1008)
#define COMPONENT_ID7 U(0x100C)
/* Slave interface register offsets */
#define SNOOP_CTRL_REG U(0x0)
#define SH_OVERRIDE_REG U(0x4)
#define READ_CHNL_QOS_VAL_OVERRIDE_REG U(0x100)
#define WRITE_CHNL_QOS_VAL_OVERRIDE_REG U(0x104)
#define MAX_OT_REG U(0x110)
/* Snoop Control register bit definitions */
#define DVM_EN_BIT BIT_32(1)
#define SNOOP_EN_BIT BIT_32(0)
#define SUPPORT_SNOOPS BIT_32(30)
#define SUPPORT_DVM BIT_32(31)
/* Status register bit definitions */
#define CHANGE_PENDING_BIT BIT_32(0)
/* Event and count register offsets */
#define EVENT_SELECT_REG U(0x0)
#define EVENT_COUNT_REG U(0x4)
#define COUNT_CNTRL_REG U(0x8)
#define COUNT_OVERFLOW_REG U(0xC)
/* Slave interface monitor registers */
#define INT_MON_REG_SI0 U(0x90000)
#define INT_MON_REG_SI1 U(0x90004)
#define INT_MON_REG_SI2 U(0x90008)
#define INT_MON_REG_SI3 U(0x9000C)
#define INT_MON_REG_SI4 U(0x90010)
#define INT_MON_REG_SI5 U(0x90014)
#define INT_MON_REG_SI6 U(0x90018)
/* Master interface monitor registers */
#define INT_MON_REG_MI0 U(0x90100)
#define INT_MON_REG_MI1 U(0x90104)
#define INT_MON_REG_MI2 U(0x90108)
#define INT_MON_REG_MI3 U(0x9010c)
#define INT_MON_REG_MI4 U(0x90110)
#define INT_MON_REG_MI5 U(0x90114)
#define SLAVE_IF_UNUSED -1
#ifndef __ASSEMBLER__
#include <stdint.h>
/* Function declarations */
/*
* The ARM CCI driver needs the following:
* 1. Base address of the CCI product
* 2. An array of map between AMBA 4 master ids and ACE/ACE lite slave
* interfaces.
* 3. Size of the array.
*
* SLAVE_IF_UNUSED should be used in the map to represent no AMBA 4 master exists
* for that interface.
*/
void cci_init(uintptr_t base, const int *map, unsigned int num_cci_masters);
void cci_enable_snoop_dvm_reqs(unsigned int master_id);
void cci_disable_snoop_dvm_reqs(unsigned int master_id);
#endif /* __ASSEMBLER__ */
#endif /* CCI_H */