diff --git a/docs/global_substitutions.txt b/docs/global_substitutions.txt
index 242e62c..fdca9c3 100644
--- a/docs/global_substitutions.txt
+++ b/docs/global_substitutions.txt
@@ -38,6 +38,7 @@
 .. |SMCCC| replace:: :term:`SMCCC`
 .. |SoC| replace:: :term:`SoC`
 .. |SP| replace:: :term:`SP`
+.. |SPCI| replace:: :term:`SPCI`
 .. |SPD| replace:: :term:`SPD`
 .. |SPM| replace:: :term:`SPM`
 .. |SVE| replace:: :term:`SVE`
diff --git a/docs/glossary.rst b/docs/glossary.rst
index afe0acf..45caf46 100644
--- a/docs/glossary.rst
+++ b/docs/glossary.rst
@@ -129,6 +129,9 @@
    SP
       Secure Partition
 
+   SPCI
+      Secure Partition Client Interface
+
    SPD
       Secure Payload Dispatcher
 
diff --git a/plat/intel/soc/stratix10/bl2_plat_setup.c b/plat/intel/soc/stratix10/bl2_plat_setup.c
index 8e8b582..f24bbde 100644
--- a/plat/intel/soc/stratix10/bl2_plat_setup.c
+++ b/plat/intel/soc/stratix10/bl2_plat_setup.c
@@ -73,9 +73,9 @@
 	deassert_peripheral_reset();
 	config_hps_hs_before_warm_reset();
 
-	watchdog_init(get_wdt_clk(&reverse_handoff_ptr));
+	watchdog_init(get_wdt_clk());
 
-	console_16550_register(PLAT_UART0_BASE, PLAT_UART_CLOCK, PLAT_BAUDRATE,
+	console_16550_register(PLAT_UART0_BASE, get_uart_clk(), PLAT_BAUDRATE,
 		&console);
 
 	socfpga_delay_timer_init();
@@ -107,7 +107,7 @@
 
 	enable_mmu_el3(0);
 
-	dw_mmc_params_t params = EMMC_INIT_PARAMS(0x100000);
+	dw_mmc_params_t params = EMMC_INIT_PARAMS(0x100000, get_mmc_clk());
 
 	info.mmc_dev_type = MMC_IS_SD;
 	info.ocr_voltage = OCR_3_3_3_4 | OCR_3_2_3_3;
diff --git a/plat/intel/soc/stratix10/include/s10_clock_manager.h b/plat/intel/soc/stratix10/include/s10_clock_manager.h
index 99eb7a6..c800b9c 100644
--- a/plat/intel/soc/stratix10/include/s10_clock_manager.h
+++ b/plat/intel/soc/stratix10/include/s10_clock_manager.h
@@ -50,10 +50,13 @@
 #define ALT_CLKMGR_MAINPLL_VCOCALIB_HSCNT_SET(x) (((x) << 0) & 0x000000ff)
 #define ALT_CLKMGR_MAINPLL_VCOCALIB_MSCNT_SET(x) (((x) << 9) & 0x0001fe00)
 
-#define ALT_CLKMGR_MAINPLL_PLLGLOB_PSRC(x)	(((x) & 0x00030000) >> 16)
-#define ALT_CLKMGR_MAINPLL_PLLGLOB_PSRC_EOSC1	0x0
-#define ALT_CLKMGR_MAINPLL_PLLGLOB_PSRC_INTOSC	0x1
-#define ALT_CLKMGR_MAINPLL_PLLGLOB_PSRC_F2S	0x2
+#define ALT_CLKMGR_PSRC(x)			(((x) & 0x00030000) >> 16)
+#define ALT_CLKMGR_SRC_MAIN			0
+#define ALT_CLKMGR_SRC_PER			1
+
+#define ALT_CLKMGR_PLLGLOB_PSRC_EOSC1		0x0
+#define ALT_CLKMGR_PLLGLOB_PSRC_INTOSC		0x1
+#define ALT_CLKMGR_PLLGLOB_PSRC_F2S		0x2
 
 #define ALT_CLKMGR_PERPLL			0xffd100a4
 #define ALT_CLKMGR_PERPLL_EN			0x0
@@ -83,14 +86,11 @@
 #define ALT_CLKMGR_PERPLL_VCOCALIB_MSCNT_SET(x) (((x) << 9) & 0x0001fe00)
 #define ALT_CLKMGR_PERPLL_VCOCALIB		0x58
 
-
-typedef struct {
-	uint32_t  clk_freq_of_eosc1;
-	uint32_t  clk_freq_of_f2h_free;
-	uint32_t  clk_freq_of_cb_intosc_ls;
-} CLOCK_SOURCE_CONFIG;
+#define ALT_CLKMGR_INTOSC_HZ			460000000
 
 void config_clkmgr_handoff(handoff *hoff_ptr);
-int get_wdt_clk(handoff *hoff_ptr);
+uint32_t get_wdt_clk(void);
+uint32_t get_uart_clk(void);
+uint32_t get_mmc_clk(void);
 
 #endif
diff --git a/plat/intel/soc/stratix10/include/s10_system_manager.h b/plat/intel/soc/stratix10/include/s10_system_manager.h
index 4500c6f..a67d689 100644
--- a/plat/intel/soc/stratix10/include/s10_system_manager.h
+++ b/plat/intel/soc/stratix10/include/s10_system_manager.h
@@ -62,6 +62,9 @@
 #define S10_SYSMGR_CORE(x)			(0xffd12000 + (x))
 #define SYSMGR_MMC				0x28
 #define SYSMGR_MMC_DRVSEL(x)			(((x) & 0x7) << 0)
+#define SYSMGR_BOOT_SCRATCH_COLD_0		0x200
+#define SYSMGR_BOOT_SCRATCH_COLD_1		0x204
+#define SYSMGR_BOOT_SCRATCH_COLD_2		0x208
 
 
 #define DISABLE_L4_FIREWALL	(BIT(0) | BIT(16) | BIT(24))
diff --git a/plat/intel/soc/stratix10/include/stratix10_private.h b/plat/intel/soc/stratix10/include/stratix10_private.h
index f437202..85aff3a 100644
--- a/plat/intel/soc/stratix10/include/stratix10_private.h
+++ b/plat/intel/soc/stratix10/include/stratix10_private.h
@@ -10,9 +10,9 @@
 #define S10_MMC_REG_BASE	0xff808000
 
 #define EMMC_DESC_SIZE		(1<<20)
-#define EMMC_INIT_PARAMS(base)			\
+#define EMMC_INIT_PARAMS(base, clk)			\
 	{	.bus_width = MMC_BUS_WIDTH_4,	\
-		.clk_rate = 50000000,		\
+		.clk_rate = (clk),		\
 		.desc_base = (base),		\
 		.desc_size = EMMC_DESC_SIZE,	\
 		.flags = 0,			\
diff --git a/plat/intel/soc/stratix10/soc/s10_clock_manager.c b/plat/intel/soc/stratix10/soc/s10_clock_manager.c
index b4d0573..ed65c2b 100644
--- a/plat/intel/soc/stratix10/soc/s10_clock_manager.c
+++ b/plat/intel/soc/stratix10/soc/s10_clock_manager.c
@@ -13,15 +13,8 @@
 
 #include "s10_clock_manager.h"
 #include "s10_handoff.h"
+#include "s10_system_manager.h"
 
-static const CLOCK_SOURCE_CONFIG  clk_source = {
-	/* clk_freq_of_eosc1 */
-	(uint32_t) 25000000,
-	/* clk_freq_of_f2h_free */
-	(uint32_t) 460000000,
-	/* clk_freq_of_cb_intosc_ls */
-	(uint32_t) 50000000,
-};
 
 void wait_pll_lock(void)
 {
@@ -195,24 +188,32 @@
 	mmio_write_32(ALT_CLKMGR + ALT_CLKMGR_INTRCLR,
 			ALT_CLKMGR_INTRCLR_MAINLOCKLOST_SET_MSK |
 			ALT_CLKMGR_INTRCLR_PERLOCKLOST_SET_MSK);
+
+	/* Pass clock source frequency into scratch register */
+	mmio_write_32(S10_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_1),
+			hoff_ptr->hps_osc_clk_h);
+	mmio_write_32(S10_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_2),
+			hoff_ptr->fpga_clk_hz);
+
 }
 
-int get_wdt_clk(handoff *hoff_ptr)
+/* Extract reference clock from platform clock source */
+uint32_t get_ref_clk(uint32_t pllglob)
 {
-	int main_noc_base_clk, l3_main_free_clk, l4_sys_free_clk;
-	int data32, mdiv, refclkdiv, ref_clk;
+	uint32_t data32, mdiv, refclkdiv, ref_clk;
+	uint32_t scr_reg;
 
-	data32 = mmio_read_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_PLLGLOB);
-
-	switch (ALT_CLKMGR_MAINPLL_PLLGLOB_PSRC(data32)) {
-	case ALT_CLKMGR_MAINPLL_PLLGLOB_PSRC_EOSC1:
-		ref_clk = clk_source.clk_freq_of_eosc1;
+	switch (ALT_CLKMGR_PSRC(pllglob)) {
+	case ALT_CLKMGR_PLLGLOB_PSRC_EOSC1:
+		scr_reg = S10_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_1);
+		ref_clk = mmio_read_32(scr_reg);
 		break;
-	case ALT_CLKMGR_MAINPLL_PLLGLOB_PSRC_INTOSC:
-		ref_clk = clk_source.clk_freq_of_cb_intosc_ls;
+	case ALT_CLKMGR_PLLGLOB_PSRC_INTOSC:
+		ref_clk = ALT_CLKMGR_INTOSC_HZ;
 		break;
-	case ALT_CLKMGR_MAINPLL_PLLGLOB_PSRC_F2S:
-		ref_clk = clk_source.clk_freq_of_f2h_free;
+	case ALT_CLKMGR_PLLGLOB_PSRC_F2S:
+		scr_reg = S10_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_2);
+		ref_clk = mmio_read_32(scr_reg);
 		break;
 	default:
 		ref_clk = 0;
@@ -220,14 +221,89 @@
 		break;
 	}
 
-	refclkdiv = ALT_CLKMGR_MAINPLL_PLLGLOB_REFCLKDIV(data32);
+	refclkdiv = ALT_CLKMGR_MAINPLL_PLLGLOB_REFCLKDIV(pllglob);
 	data32 = mmio_read_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_FDBCK);
 	mdiv = ALT_CLKMGR_MAINPLL_FDBCK_MDIV(data32);
+
 	ref_clk = (ref_clk / refclkdiv) * (6 + mdiv);
 
-	main_noc_base_clk = ref_clk / (hoff_ptr->main_pll_pllc1 & 0xff);
-	l3_main_free_clk = main_noc_base_clk / (hoff_ptr->main_pll_nocclk + 1);
-	l4_sys_free_clk = l3_main_free_clk / 4;
+	return ref_clk;
+}
 
-	return l4_sys_free_clk;
+/* Calculate L3 interconnect main clock */
+uint32_t get_l3_clk(uint32_t ref_clk)
+{
+	uint32_t noc_base_clk, l3_clk, noc_clk, data32;
+	uint32_t pllc1_reg;
+
+	noc_clk = mmio_read_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_NOCCLK);
+
+	switch (ALT_CLKMGR_PSRC(noc_clk)) {
+	case ALT_CLKMGR_SRC_MAIN:
+		pllc1_reg = ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_PLLC1;
+		break;
+	case ALT_CLKMGR_SRC_PER:
+		pllc1_reg = ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_PLLC1;
+		break;
+	default:
+		pllc1_reg = 0;
+		assert(0);
+		break;
+	}
+
+	data32 = mmio_read_32(pllc1_reg);
+	noc_base_clk = ref_clk / (data32 & 0xff);
+	l3_clk = noc_base_clk / (noc_clk + 1);
+
+	return l3_clk;
+}
+
+/* Calculate clock frequency to be used for watchdog timer */
+uint32_t get_wdt_clk(void)
+{
+	uint32_t data32, ref_clk, l3_clk, l4_sys_clk;
+
+	data32 = mmio_read_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_PLLGLOB);
+	ref_clk = get_ref_clk(data32);
+
+	l3_clk = get_l3_clk(ref_clk);
+
+	l4_sys_clk = l3_clk / 4;
+
+	return l4_sys_clk;
+}
+
+/* Calculate clock frequency to be used for UART driver */
+uint32_t get_uart_clk(void)
+{
+	uint32_t data32, ref_clk, l3_clk, l4_sp_clk;
+
+	data32 = mmio_read_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_PLLGLOB);
+	ref_clk = get_ref_clk(data32);
+
+	l3_clk = get_l3_clk(ref_clk);
+
+	data32 = mmio_read_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_NOCDIV);
+	data32 = (data32 >> 16) & 0x3;
+	data32 = 1 << data32;
+
+	l4_sp_clk = (l3_clk / data32);
+
+	return l4_sp_clk;
+}
+
+/* Calculate clock frequency to be used for SDMMC driver */
+uint32_t get_mmc_clk(void)
+{
+	uint32_t data32, ref_clk, l3_clk, mmc_clk;
+
+	data32 = mmio_read_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_PLLGLOB);
+	ref_clk = get_ref_clk(data32);
+
+	l3_clk = get_l3_clk(ref_clk);
+
+	data32 = mmio_read_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR6CLK);
+	mmc_clk = (l3_clk / (data32 + 1)) / 4;
+
+	return mmc_clk;
 }
diff --git a/plat/socionext/uniphier/uniphier_console.S b/plat/socionext/uniphier/uniphier_console.S
index 2c8dc8f..1113c6e 100644
--- a/plat/socionext/uniphier/uniphier_console.S
+++ b/plat/socionext/uniphier/uniphier_console.S
@@ -23,15 +23,9 @@
 0:	ldr	w2, [x1, #UNIPHIER_UART_LSR]
 	tbz	w2, #UNIPHIER_UART_LSR_THRE_BIT, 0b
 
-	mov	w2, w0
+	str	w0, [x1, #UNIPHIER_UART_TX]
 
-1:	str	w2, [x1, #UNIPHIER_UART_TX]
-
-	cmp	w2, #'\n'
-	b.ne	2f
-	mov	w2, #'\r'	/* Append '\r' to '\n' */
-	b	1b
-2:	ret
+	ret
 endfunc uniphier_console_putc
 
 /*
diff --git a/plat/socionext/uniphier/uniphier_console_setup.c b/plat/socionext/uniphier/uniphier_console_setup.c
index 8185ec5..64ee797 100644
--- a/plat/socionext/uniphier/uniphier_console_setup.c
+++ b/plat/socionext/uniphier/uniphier_console_setup.c
@@ -32,7 +32,8 @@
 #if DEBUG
 			 CONSOLE_FLAG_RUNTIME |
 #endif
-			 CONSOLE_FLAG_CRASH,
+			 CONSOLE_FLAG_CRASH |
+			 CONSOLE_FLAG_TRANSLATE_CRLF,
 		.putc = uniphier_console_putc,
 		.getc = uniphier_console_getc,
 		.flush = uniphier_console_flush,