// SPDX-License-Identifier: BSD-2-Clause
/*
 * Copyright (C) 2017 Marvell International Ltd.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include <initcall.h>
#include <io.h>
#include <kernel/panic.h>
#include <mm/core_memprot.h>
#include <util.h>

#define PHY_2_VIR(addr)	((vaddr_t)phys_to_virt((addr), MEM_AREA_IO_SEC))

#define MCU_BASE	0xD0000000
#define MCU_MC_CONTROL_0_REG	PHY_2_VIR(MCU_BASE + 0x044)
#define TRUSTZONE_LOCK			BIT(31)

#define MCU_TZ_RANGE_HIGH_REG(x)	PHY_2_VIR(MCU_BASE + 0x84 + ((x) << 3))
#define MCU_TZ_RANGE_LOW_REG(x)		PHY_2_VIR(MCU_BASE + 0x80 + ((x) << 3))

#define RW_PERM	0x0
#define RO_PERM	0x1
#define WO_PERM	0x2
#define ABORT_PERM	0x3

#define MAX_RANGE_NUM		16
#define INVALID_SIZE_CODE	0xff

#ifdef TEE_RES_CFG_16M
#define RSVD_SEC_MEM	(SIZE_8M + SIZE_8M)
#elif defined(TEE_RES_CFG_24M)
#define RSVD_SEC_MEM	(SIZE_8M + SIZE_8M + SIZE_8M)
#elif defined(TEE_RES_CFG_8M)
#define RSVD_SEC_MEM	SIZE_8M
#else
#error "no reserved secure memory defined."
#endif

#define RA_ADDR	TZDRAM_BASE
#define RA_SIZE	TZDRAM_SIZE
#define RA_PERM	ABORT_PERM

#define TZ_IS_VALID(data)		((data) & (0x1))
#define TZ_SET_VALID(data)		((data) |= (0x1))

#define TZ_GET_PERM(data, ret)		((ret) = (((data) & (0x3 << 1)) >> 1))
#define TZ_SET_PERM(data, val)		\
	do {	\
		(data) &= (~(0x3 << 1)); \
		(data) |= (((val) & 0x3) << 1);	\
	} while (0)

#define TZ_GET_RZ_EN(data, ret)		((ret) = (((data) & (0x1 << 3)) >> 3))
#define TZ_SET_RZ_EN(data, val)		\
	do {	\
		(data) &= (~(0x1 << 3)); \
		(data) |= (((val) & 0x1) << 3);	\
	} while (0)

#define TZ_GET_AREA_LEN_CODE(data, ret)	((ret) = (((data) & (0x1F << 8)) >> 8))

#define TZ_SET_AREA_LEN_CODE(data, val)	\
	do {	\
		(data) &= (~(0x1F << 8));	\
		(data) |= (((val) & 0x1F) << 8);		\
	} while (0)

#define TZ_GET_START_ADDR_L(data, ret)	\
	((ret) = (((data) & 0xFFF00000)))

#define TZ_SET_START_ADDR_L(data, val)		\
	do {	\
		(data) &= (~0xFFF00000);		\
		(data) |= (((val) & 0xFFF00000));	\
	} while (0)

#define TZ_GET_UR_PERM(data, val)	((ret) = (((data) & (0x3 << 4)) >> 4))
#define TZ_SET_UR_PERM(data, val)	\
	do {	\
		(data) &= (~(0x3 << 4)); \
		(data) |= (((val) & 0x3) << 4);	\
	} while (0)

#define TZ_GET_UR_RZ_EN(data, val)		\
	((ret) = (((data) & (0x1 << 6)) >> 6))

#define TZ_SET_UR_RZ_EN(data, val)		\
	do {	\
		(data) &= (~(0x1 << 6)); \
		(data) |= (((val) & 0x1) << 6);	\
	} while (0)

 /* armada3700 mini region size is 1M */
#define RANGE_SIZE_TO_CODE(size, code, i)	\
	do {	\
		(code) = INVALID_SIZE_CODE;	\
		for ((i) = 0; (i) <= 0x1d; (i)++) {	   \
			if (((uint32_t)0x1 << (i)) == ((size) >> 20)) { \
				(code) = (i);	\
				break;	\
			}	\
		}	\
	} while (0)

#define TZ_LOCK_MC(x)		\
	do {	\
		(x) = io_read32(MCU_MC_CONTROL_0_REG);	\
		(x) |= (TRUSTZONE_LOCK);	\
		 io_write32(MCU_MC_CONTROL_0_REG, (x));	\
	} while (0)

#define _IS_ALIGNED(_addr, _algn)	(!((_addr) & ((_algn) - 1)))

register_phys_mem_pgdir(MEM_AREA_IO_SEC, MCU_BASE, CORE_MMU_PGDIR_SIZE);

static int32_t _find_valid_range(void)
{
	uint32_t i;
	uint32_t tmp;

	for (i = 0; i < MAX_RANGE_NUM; i++) {
		tmp = io_read32(MCU_TZ_RANGE_LOW_REG(i));
		if (!TZ_IS_VALID(tmp))
			return i;
	}
	return -1;
}

static int32_t set_range(uint32_t addr, uint32_t size, uint32_t perm)
{
	uint32_t data;
	uint32_t sizecode;
	int32_t valid_range;
	uint32_t i;

	if (!_IS_ALIGNED(addr, SIZE_1M)) {
		EMSG("region addr(0x%" PRIx32 ") is not aligned with 1M!",
			addr);
		return -1;
	}

	if (!_IS_ALIGNED(size, SIZE_1M)) {
		EMSG("region size(0x%" PRIx32 ") is not aligned with 1M!",
			size);
		return -1;
	}

	RANGE_SIZE_TO_CODE(size, sizecode, i);
	if (sizecode == INVALID_SIZE_CODE) {
		EMSG("not valid region size(2^n)! size:0x%" PRIx32, size);
		return -1;
	}

	valid_range = _find_valid_range();
	if (valid_range == -1) {
		EMSG("ERR: can't find valid range!");
		return -1;
	}

	data = io_read32(MCU_TZ_RANGE_LOW_REG(valid_range));

	TZ_SET_VALID(data);
	TZ_SET_PERM(data, perm);
	TZ_SET_AREA_LEN_CODE(data, sizecode);
	TZ_SET_START_ADDR_L(data, addr);

	if (!valid_range) {
		/* Set Undefine Range RW */
		TZ_SET_UR_PERM(data, RW_PERM);
		TZ_SET_UR_RZ_EN(data, 0);
	}

	io_write32(MCU_TZ_RANGE_LOW_REG(valid_range), data);

	return 0;
}

static void  _dump_range(void)
{
	uint32_t i;
	uint32_t tmp;
	uint32_t __maybe_unused sizecode_read;
	uint32_t __maybe_unused sizem;
	uint32_t __maybe_unused addr_read;
	uint32_t __maybe_unused perm_read;

	for (i = 0; i < MAX_RANGE_NUM; i++) {
		tmp = io_read32(MCU_TZ_RANGE_LOW_REG(i));

		if (TZ_IS_VALID(tmp)) {
			TZ_GET_PERM(tmp, perm_read);
			TZ_GET_AREA_LEN_CODE(tmp, sizecode_read);
			TZ_GET_START_ADDR_L(tmp, addr_read);

			DMSG("Range Num%" PRIu32
				": Reg 0x%" PRIx64 " = 0x%" PRIx32,
				i, MCU_TZ_RANGE_LOW_REG(i), tmp);
			DMSG("AddrL: 0x%08" PRIx32, addr_read);
			DMSG("Size: %" PRIu32 "M", (0x1 << sizecode_read));
			DMSG("Perm: %" PRIu32, perm_read);
		}
	}
}

static void _set_range(uint32_t addr, uint32_t size, uint32_t perm)
{
	uint32_t rgn_addr = addr;
	uint32_t rgn_size = size;
	/* minimum region size is 1M and must be times of 1M */
	uint32_t p = 0x100000;

	while (1) {
		if ((p * 2) > rgn_size) {
			set_range(rgn_addr, p, perm);
			rgn_addr += p;
			rgn_size -= p;
			if (rgn_size == 0)
				break;
			p = 0x100000;
		} else
			p <<= 1;
	}
}

static TEE_Result init_sec_perf(void)
{
	uint32_t tmp;

	/* Set Secure Memory Region */
	DMSG("sec-rgn size: ra = 0x%" PRIx32 ", size = 0x%" PRIx64,
		RA_ADDR, RA_SIZE);
	_set_range(RA_ADDR, RA_SIZE, RA_PERM);

	/* Close TZ register modification */
	TZ_LOCK_MC(tmp);

	_dump_range();

	return TEE_SUCCESS;
}

service_init(init_sec_perf);