blob: 4e3e55581fe8871b0d647f73bfea5bc8c2df998c [file] [log] [blame]
# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# various tests to make sure we dist the win32 stuff (for MSVC builds) right
# include this snippet to add a common release: target by using
# include $(top_srcdir)/common/release.mak
# checks for left-over files in the (usually uninstalled) tree, ie. for
# stuff that best be deleted to avoid problems like having old plugin binaries
# lying around.
#
# set CRUFT_FILES and/or CRUFT_DIRS in your Makefile.am when you include this
VPATH = @srcdir@
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
@BUILD_TOOLS_TRUE@am__append_1 = tools
DIST_COMMON = $(top_srcdir)/common/win32.mak \
$(top_srcdir)/common/release.mak $(top_srcdir)/common/po.mak \
$(top_srcdir)/common/coverage/lcov.mak \
$(top_srcdir)/common/cruft.mak INSTALL NEWS README AUTHORS \
ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(srcdir)/config.h.in $(srcdir)/stamp.h.in \
$(srcdir)/gstreamer.spec.in ABOUT-NLS COPYING TODO compile \
config.guess config.rpath config.sub depcomp install-sh \
missing ltmain.sh
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/common/m4/as-ac-expand.m4 \
$(top_srcdir)/common/m4/as-auto-alt.m4 \
$(top_srcdir)/common/m4/as-compiler-flag.m4 \
$(top_srcdir)/common/m4/as-docbook.m4 \
$(top_srcdir)/common/m4/as-libtool.m4 \
$(top_srcdir)/common/m4/as-version.m4 \
$(top_srcdir)/common/m4/ax_create_stdint_h.m4 \
$(top_srcdir)/common/m4/ax_pthread.m4 \
$(top_srcdir)/common/m4/gst-arch.m4 \
$(top_srcdir)/common/m4/gst-args.m4 \
$(top_srcdir)/common/m4/gst-check.m4 \
$(top_srcdir)/common/m4/gst-doc.m4 \
$(top_srcdir)/common/m4/gst-error.m4 \
$(top_srcdir)/common/m4/gst-feature.m4 \
$(top_srcdir)/common/m4/gst-function.m4 \
$(top_srcdir)/common/m4/gst-gettext.m4 \
$(top_srcdir)/common/m4/gst-glib2.m4 \
$(top_srcdir)/common/m4/gst-package-release-datetime.m4 \
$(top_srcdir)/common/m4/gst-parser.m4 \
$(top_srcdir)/common/m4/gst-platform.m4 \
$(top_srcdir)/common/m4/gst-plugin-docs.m4 \
$(top_srcdir)/common/m4/gst-plugindir.m4 \
$(top_srcdir)/common/m4/gst.m4 \
$(top_srcdir)/common/m4/gtk-doc.m4 \
$(top_srcdir)/common/m4/introspection.m4 \
$(top_srcdir)/common/m4/pkg.m4 \
$(top_srcdir)/m4/check-checks.m4 $(top_srcdir)/m4/gettext.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/inttypes_h.m4 $(top_srcdir)/m4/lib-ld.m4 \
$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/longlong.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/stdint_h.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = stamp.h gstreamer.spec
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(aclocaldir)"
DATA = $(aclocal_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
GZIP_ENV = --best
DIST_ARCHIVES = $(distdir).tar.xz
DIST_TARGETS = dist-xz
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
# note: keep in sync with configure.ac
ACLOCAL_AMFLAGS = -I m4 -I common/m4
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASH_COMPLETION_CFLAGS = @BASH_COMPLETION_CFLAGS@
BASH_COMPLETION_DIR = @BASH_COMPLETION_DIR@
BASH_COMPLETION_LIBS = @BASH_COMPLETION_LIBS@
BASH_HELPERS_DIR = @BASH_HELPERS_DIR@
BISON_PATH = @BISON_PATH@
CAP_LIBS = @CAP_LIBS@
CAT_ENTRY_END = @CAT_ENTRY_END@
CAT_ENTRY_START = @CAT_ENTRY_START@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CHECK_MAJOR_VERSION = @CHECK_MAJOR_VERSION@
CHECK_MICRO_VERSION = @CHECK_MICRO_VERSION@
CHECK_MINOR_VERSION = @CHECK_MINOR_VERSION@
CHECK_VERSION = @CHECK_VERSION@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIR = @DATADIR@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DEPRECATED_CFLAGS = @DEPRECATED_CFLAGS@
DLLTOOL = @DLLTOOL@
DOCBOOK_ROOT = @DOCBOOK_ROOT@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_SUBUNIT = @ENABLE_SUBUNIT@
ERROR_CFLAGS = @ERROR_CFLAGS@
EXEEXT = @EXEEXT@
FFLAGS = @FFLAGS@
FGREP = @FGREP@
FLEX_PATH = @FLEX_PATH@
GCOV = @GCOV@
GCOV_CFLAGS = @GCOV_CFLAGS@
GCOV_LIBS = @GCOV_LIBS@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GIO_CFLAGS = @GIO_CFLAGS@
GIO_LDFLAGS = @GIO_LDFLAGS@
GIO_LIBS = @GIO_LIBS@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_EXTRA_CFLAGS = @GLIB_EXTRA_CFLAGS@
GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
GLIB_LIBS = @GLIB_LIBS@
GLIB_MKENUMS = @GLIB_MKENUMS@
GLIB_PREFIX = @GLIB_PREFIX@
GLIB_REQ = @GLIB_REQ@
GMP_LIBS = @GMP_LIBS@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GREP = @GREP@
GSL_LIBS = @GSL_LIBS@
GST_AGE = @GST_AGE@
GST_ALL_CFLAGS = @GST_ALL_CFLAGS@
GST_ALL_CXXFLAGS = @GST_ALL_CXXFLAGS@
GST_ALL_LDFLAGS = @GST_ALL_LDFLAGS@
GST_ALL_LIBS = @GST_ALL_LIBS@
GST_API_VERSION = @GST_API_VERSION@
GST_CURRENT = @GST_CURRENT@
GST_DISABLE_ALLOC_TRACE_DEFINE = @GST_DISABLE_ALLOC_TRACE_DEFINE@
GST_DISABLE_GST_DEBUG_DEFINE = @GST_DISABLE_GST_DEBUG_DEFINE@
GST_DISABLE_OPTION_PARSING_DEFINE = @GST_DISABLE_OPTION_PARSING_DEFINE@
GST_DISABLE_PARSE_DEFINE = @GST_DISABLE_PARSE_DEFINE@
GST_DISABLE_PLUGIN_DEFINE = @GST_DISABLE_PLUGIN_DEFINE@
GST_DISABLE_REGISTRY_DEFINE = @GST_DISABLE_REGISTRY_DEFINE@
GST_DISABLE_TRACE_DEFINE = @GST_DISABLE_TRACE_DEFINE@
GST_HAVE_MONOTONIC_CLOCK_DEFINE = @GST_HAVE_MONOTONIC_CLOCK_DEFINE@
GST_HAVE_POSIX_TIMERS_DEFINE = @GST_HAVE_POSIX_TIMERS_DEFINE@
GST_HAVE_UNALIGNED_ACCESS_DEFINE = @GST_HAVE_UNALIGNED_ACCESS_DEFINE@
GST_LEVEL_DEFAULT = @GST_LEVEL_DEFAULT@
GST_LIBVERSION = @GST_LIBVERSION@
GST_LIB_LDFLAGS = @GST_LIB_LDFLAGS@
GST_LICENSE = @GST_LICENSE@
GST_LT_LDFLAGS = @GST_LT_LDFLAGS@
GST_OBJ_CFLAGS = @GST_OBJ_CFLAGS@
GST_OBJ_CXXFLAGS = @GST_OBJ_CXXFLAGS@
GST_OBJ_LIBS = @GST_OBJ_LIBS@
GST_OPTION_CFLAGS = @GST_OPTION_CFLAGS@
GST_OPTION_CXXFLAGS = @GST_OPTION_CXXFLAGS@
GST_PACKAGE_NAME = @GST_PACKAGE_NAME@
GST_PACKAGE_ORIGIN = @GST_PACKAGE_ORIGIN@
GST_PKG_CONFIG_PATH = @GST_PKG_CONFIG_PATH@
GST_PLUGIN_LDFLAGS = @GST_PLUGIN_LDFLAGS@
GST_PLUGIN_LIBTOOLFLAGS = @GST_PLUGIN_LIBTOOLFLAGS@
GST_PLUGIN_SCANNER_INSTALLED = @GST_PLUGIN_SCANNER_INSTALLED@
GST_PTP_HELPER_INSTALLED = @GST_PTP_HELPER_INSTALLED@
GST_REGISTRY_DOC_TYPES = @GST_REGISTRY_DOC_TYPES@
GST_REVISION = @GST_REVISION@
GST_VERSION_MAJOR = @GST_VERSION_MAJOR@
GST_VERSION_MICRO = @GST_VERSION_MICRO@
GST_VERSION_MINOR = @GST_VERSION_MINOR@
GST_VERSION_NANO = @GST_VERSION_NANO@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
GTKDOC_MKPDF = @GTKDOC_MKPDF@
GTKDOC_REBASE = @GTKDOC_REBASE@
HAVE_CAP = @HAVE_CAP@
HAVE_DOCBOOK2PS = @HAVE_DOCBOOK2PS@
HAVE_DVIPS = @HAVE_DVIPS@
HAVE_EPSTOPDF = @HAVE_EPSTOPDF@
HAVE_FORK = @HAVE_FORK@
HAVE_GMP = @HAVE_GMP@
HAVE_GSL = @HAVE_GSL@
HAVE_JADETEX = @HAVE_JADETEX@
HAVE_PNGTOPNM = @HAVE_PNGTOPNM@
HAVE_PNMTOPS = @HAVE_PNMTOPS@
HAVE_PS2PDF = @HAVE_PS2PDF@
HAVE_XMLLINT = @HAVE_XMLLINT@
HAVE_XSLTPROC = @HAVE_XSLTPROC@
HOST_CPU = @HOST_CPU@
HTML_DIR = @HTML_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@
INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@
INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@
INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@
INTROSPECTION_INIT = @INTROSPECTION_INIT@
INTROSPECTION_LIBS = @INTROSPECTION_LIBS@
INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@
INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@
INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBDIR = @LIBDIR@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LOCALEDIR = @LOCALEDIR@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PACKAGE_VERSION_MAJOR = @PACKAGE_VERSION_MAJOR@
PACKAGE_VERSION_MICRO = @PACKAGE_VERSION_MICRO@
PACKAGE_VERSION_MINOR = @PACKAGE_VERSION_MINOR@
PACKAGE_VERSION_NANO = @PACKAGE_VERSION_NANO@
PACKAGE_VERSION_RELEASE = @PACKAGE_VERSION_RELEASE@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL_PATH = @PERL_PATH@
PKG_CONFIG = @PKG_CONFIG@
PLUGINDIR = @PLUGINDIR@
POSUB = @POSUB@
PRINTF_CFLAGS = @PRINTF_CFLAGS@
PROFILE_CFLAGS = @PROFILE_CFLAGS@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SED = @SED@
SETCAP = @SETCAP@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VALGRIND_CFLAGS = @VALGRIND_CFLAGS@
VALGRIND_LIBS = @VALGRIND_LIBS@
VALGRIND_PATH = @VALGRIND_PATH@
VERSION = @VERSION@
WARNING_CFLAGS = @WARNING_CFLAGS@
WIN32_LIBS = @WIN32_LIBS@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
XML_CATALOG = @XML_CATALOG@
XSLTPROC = @XSLTPROC@
XSLTPROC_FLAGS = @XSLTPROC_FLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
ax_pthread_config = @ax_pthread_config@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
plugindir = @plugindir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc --enable-docbook
aclocaldir = $(datadir)/aclocal
aclocal_DATA = gst-element-check-@GST_API_VERSION@.m4
SUBDIRS = pkgconfig gst libs plugins tests docs po m4 common data \
$(am__append_1)
# These are all the possible subdirs
DIST_SUBDIRS = pkgconfig \
gst libs plugins tools tests \
docs \
po \
m4 \
common \
data
# the MANIFEST contains all win32 related files that should be disted
win32 = $(shell cat $(top_srcdir)/win32/MANIFEST)
# wildcard is apparently not portable to other makes, hence the use of find
# these are library .def files with the symbols to export
win32defs = $(shell find $(top_srcdir)/win32/common -name '*.def')
# wildcard is apparently not portable to other makes, hence the use of find
# these are files that need to be disted with CRLF line endings:
win32crlf = $(shell find $(top_srcdir)/win32 -name '*.dsw' -o -name '*.dsp')
# include before EXTRA_DIST for win32 assignment
EXTRA_DIST = \
gstreamer.spec gstreamer.spec.in \
gst-element-check.m4 \
configure.ac autogen.sh depcomp \
MAINTAINERS ABOUT-NLS RELEASE gstreamer.doap \
scripts/gst-uninstalled \
$(win32)
CLEANFILES = gst-element-check-@GST_API_VERSION@.m4
DISTCLEANFILES = _stdint.h
@GST_GCOV_ENABLED_TRUE@GCOV_DIRS = gst libs
# Do not run the check-exports test in case any option which causes the API to
# change has been used
@GST_DISABLE_REGISTRY_FALSE@@GST_DISABLE_TRACE_FALSE@CHECK_EXPORTS = check-exports
# cruft: plugins that have been merged or moved or renamed
CRUFT_FILES = \
$(top_builddir)/common/shave \
$(top_builddir)/common/shave-libtool \
$(top_builddir)/common/m4/codeset.m4 \
$(top_builddir)/common/m4/gettext.m4 \
$(top_builddir)/common/m4/glibc2.m4 \
$(top_builddir)/common/m4/glibc21.m4 \
$(top_builddir)/common/m4/iconv.m4 \
$(top_builddir)/common/m4/intdiv0.m4 \
$(top_builddir)/common/m4/intl.m4 \
$(top_builddir)/common/m4/intldir.m4 \
$(top_builddir)/common/m4/intlmacosx.m4 \
$(top_builddir)/common/m4/intmax.m4 \
$(top_builddir)/common/m4/inttypes-pri.m4 \
$(top_builddir)/common/m4/inttypes_h.m4 \
$(top_builddir)/common/m4/lcmessage.m4 \
$(top_builddir)/common/m4/lib-ld.m4 \
$(top_builddir)/common/m4/lib-link.m4 \
$(top_builddir)/common/m4/lib-prefix.m4 \
$(top_builddir)/common/m4/libtool.m4 \
$(top_builddir)/common/m4/lock.m4 \
$(top_builddir)/common/m4/longlong.m4 \
$(top_builddir)/common/m4/ltoptions.m4 \
$(top_builddir)/common/m4/ltsugar.m4 \
$(top_builddir)/common/m4/ltversion.m4 \
$(top_builddir)/common/m4/lt~obsolete.m4 \
$(top_builddir)/common/m4/nls.m4 \
$(top_builddir)/common/m4/po.m4 \
$(top_builddir)/common/m4/printf-posix.m4 \
$(top_builddir)/common/m4/progtest.m4 \
$(top_builddir)/common/m4/size_max.m4 \
$(top_builddir)/common/m4/stdint_h.m4 \
$(top_builddir)/common/m4/uintmax_t.m4 \
$(top_builddir)/common/m4/visibility.m4 \
$(top_builddir)/common/m4/wchar_t.m4 \
$(top_builddir)/common/m4/wint_t.m4 \
$(top_builddir)/common/m4/xsize.m4
CRUFT_DIRS = \
$(top_builddir)/tests/examples/xml \
$(top_builddir)/tests/examples/launch \
$(top_builddir)/tests/examples/metadata \
$(top_builddir)/tests/examples/queue \
$(top_builddir)/tests/examples/typefind \
$(top_builddir)/gst/tmp-introspect* \
$(top_builddir)/libs/gst/*/tmp-introspect* \
$(top_srcdir)/docs/plugins/tmpl
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/common/win32.mak $(top_srcdir)/common/release.mak $(top_srcdir)/common/po.mak $(top_srcdir)/common/coverage/lcov.mak $(top_srcdir)/common/cruft.mak $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_srcdir)/common/win32.mak $(top_srcdir)/common/release.mak $(top_srcdir)/common/po.mak $(top_srcdir)/common/coverage/lcov.mak $(top_srcdir)/common/cruft.mak:
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
stamp.h: $(top_builddir)/config.status $(srcdir)/stamp.h.in
cd $(top_builddir) && $(SHELL) ./config.status $@
gstreamer.spec: $(top_builddir)/config.status $(srcdir)/gstreamer.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
install-aclocalDATA: $(aclocal_DATA)
@$(NORMAL_INSTALL)
@list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(aclocaldir)'"; \
$(MKDIR_P) "$(DESTDIR)$(aclocaldir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(aclocaldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(aclocaldir)" || exit $$?; \
done
uninstall-aclocalDATA:
@$(NORMAL_UNINSTALL)
@list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(aclocaldir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA) config.h all-local
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(aclocaldir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-aclocalDATA
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-aclocalDATA
.MAKE: $(am__recursive_targets) all install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
am--refresh check check-am clean clean-cscope clean-generic \
clean-libtool cscope cscopelist-am ctags ctags-am dist \
dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
dist-tarZ dist-xz dist-zip distcheck distclean \
distclean-generic distclean-hdr distclean-libtool \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-aclocalDATA \
install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
ps ps-am tags tags-am uninstall uninstall-aclocalDATA \
uninstall-am
win32-debug:
@echo; \
echo win32 = $(win32); \
echo; \
echo win32defs = $(win32defs); \
echo; \
echo win32crlf = $(win32crlf); \
echo
win32-check-crlf:
@echo Checking win32 files for CR LF line endings ...; \
fail=0 ; \
for each in $(win32crlf) ; do \
result=`perl -e 'print grep(/\r\n/,<>)' "$$each" | wc -l`; \
if test "$$result" = 0 ; then \
echo $$each must be fixed to have CRLF line endings ; \
fail=1; \
fi ; \
done ; \
exit $$fail
# make sure all symbols we export on linux are defined in the win32 .def too
# (don't care about other unixes for now, it's enough if it works on one of
# the linux build bots; we assume .so )
check-exports:
@fail=0 ; \
for l in $(win32defs); do \
libbase=`basename "$$l" ".def"`; \
libso=`find "$(top_builddir)" -name "$$libbase-@GST_API_VERSION@.so" | grep -v /_build/ | head -n1`; \
libdef="$(top_srcdir)/win32/common/$$libbase.def"; \
if test "x$$libso" != "x"; then \
echo Checking symbols in $$libso; \
if ! ($(top_srcdir)/common/check-exports $$libdef $$libso) ; then \
fail=1; \
fi; \
fi; \
done ; \
if test $$fail != 0; then \
echo '-----------------------------------------------------------'; \
echo 'Run this to update the .def files:'; \
echo 'make update-exports'; \
echo '-----------------------------------------------------------'; \
fi; \
exit $$fail
update-exports:
make check-exports 2>&1 | patch -p1
git add win32/common/libgst*.def
git diff --cached -- win32/common/
echo '^^^--- updated and staged changes above'
# complain about nonportable printf format strings (%lld, %llu, %zu etc.)
check-nonportable-print-format:
@fail=0 ; \
loc=`find "$(top_srcdir)" -name '*.c' | xargs grep -n -e '%[0-9]*ll[udx]' -e '%[0-9]*z[udx]'`; \
if test "x$$loc" != "x"; then \
echo "Please fix the following print format strings:" ; \
find "$(top_srcdir)" -name '*.c' | xargs grep -n -e '%[0-9]*ll[udx]' -e '%[0-9]*z[udx]'; \
fail=1; \
fi; \
exit $$fail
dist-hook: check-exports win32-check-crlf
release: dist
@$(MAKE) $(PACKAGE)-$(VERSION).tar.xz.sha256sum
@echo
@echo "================================================================================================="
@echo "http://gstreamer.freedesktop.org/src/$(PACKAGE)/$(PACKAGE)-$(VERSION).tar.xz"
@cat $(PACKAGE)-$(VERSION).tar.xz.sha256sum
@echo "================================================================================================="
@if [ -d ~/releases/ ]; then \
cp -v $(PACKAGE)-$(VERSION).tar.xz ~/releases/; \
fi
@if [ -d ../www/data/src ]; then \
mv -v $(PACKAGE)-$(VERSION).tar.xz ../www/data/src/$(PACKAGE)/ ; \
mv -v $(PACKAGE)-$(VERSION).tar.xz.sha256sum ../www/data/src/$(PACKAGE)/ ; \
fi
@echo "================================================================================================="
# generate sha256 sum files
%.sha256sum: %
@sha256sum $< > $@
# check that no marshal or enumtypes files are included
# this in turn ensures that distcheck fails for missing .list files which is currently
# shadowed when the corresponding .c and .h files are included.
distcheck-hook:
@test "x" = "x`find $(distdir) -name \*-enumtypes.[ch] | grep -v win32`" && \
test "x" = "x`find $(distdir) -name \*-marshal.[ch]`" || \
( echo "*** Leftover enumtypes or marshal files in the tarball." && \
echo "*** Make sure the following files are not disted:" && \
find $(distdir) -name \*-enumtypes.[ch] | grep -v win32 && \
find $(distdir) -name \*-marshal.[ch] && \
false )
# rule to download the latest .po files
download-po: $(top_srcdir)/common/download-translations
$(top_srcdir)/common/download-translations $(PACKAGE)
@GST_GCOV_ENABLED_TRUE@clean-gcov:
@GST_GCOV_ENABLED_TRUE@ find -name "*.da" -o -name "*.gcov" | xargs rm || true
@GST_GCOV_ENABLED_TRUE@clean-bbg:
@GST_GCOV_ENABLED_TRUE@ find -name "*.bbg" -o -name "*.bb" | xargs rm || true
@GST_GCOV_ENABLED_TRUE@.PHONY: coverage-report.txt
@GST_GCOV_ENABLED_TRUE@coverage-report.txt:
@GST_GCOV_ENABLED_TRUE@ BBG_FILES=`find $(GCOV_DIRS) -name "*.bbg"` ; \
@GST_GCOV_ENABLED_TRUE@ C_FILES= ; \
@GST_GCOV_ENABLED_TRUE@ for F in $$BBG_FILES ; do \
@GST_GCOV_ENABLED_TRUE@ F_nolibs=`echo $$F | sed -e 's/.libs\///g'` ; \
@GST_GCOV_ENABLED_TRUE@ C=`echo $$F_nolibs | sed -e 's/.bbg/.c/g'` ; \
@GST_GCOV_ENABLED_TRUE@ B=`basename $$F .bbg` ; \
@GST_GCOV_ENABLED_TRUE@ D=`dirname $$F` ; \
@GST_GCOV_ENABLED_TRUE@ DA=`echo $$F | sed -e 's/.bbg/.da/g'` ; \
@GST_GCOV_ENABLED_TRUE@ DA_libs=`echo $$D/.libs/$$B/.da` ; \
@GST_GCOV_ENABLED_TRUE@ if test -e $$DA || test -e $$DA_libs; then \
@GST_GCOV_ENABLED_TRUE@ C_FILES="$$C_FILES $$C" ; \
@GST_GCOV_ENABLED_TRUE@ fi ; \
@GST_GCOV_ENABLED_TRUE@ done ; \
@GST_GCOV_ENABLED_TRUE@ echo $$C_FILES ; \
@GST_GCOV_ENABLED_TRUE@ $(top_builddir)/testsuite/decode-gcov --report $$C_FILES > coverage-report.txt
@GST_GCOV_ENABLED_TRUE@check-coverage: clean-gcov all check coverage-report.txt
@GST_GCOV_ENABLED_TRUE@ cat coverage-report.txt
@GST_GCOV_ENABLED_FALSE@coverage-report.txt:
@GST_GCOV_ENABLED_FALSE@ echo "Need to reconfigure with --enable-gcov"
@GST_GCOV_ENABLED_FALSE@check-coverage:
@GST_GCOV_ENABLED_FALSE@ echo "Need to reconfigure with --enable-gcov"
@HAVE_CHECK_TRUE@check-valgrind:
@HAVE_CHECK_TRUE@ $(MAKE) -C tests/check check-valgrind
@HAVE_CHECK_TRUE@check-torture:
@HAVE_CHECK_TRUE@ $(MAKE) -C tests/check torture
@HAVE_CHECK_TRUE@build-checks:
@HAVE_CHECK_TRUE@ $(MAKE) -C tests/check build-checks
@HAVE_CHECK_FALSE@check-valgrind:
@HAVE_CHECK_FALSE@ echo "'check' library not installed, skipping"
@HAVE_CHECK_FALSE@check-torture:
@HAVE_CHECK_FALSE@ echo "'check' library not installed, skipping"
@HAVE_CHECK_FALSE@build-checks:
@HAVE_CHECK_FALSE@ echo "'check' library not installed, skipping"
# FIXME: this target should be run every time we do "make release"
# find a way of automating that
win32-update:
for f in gstversion.h gstenumtypes.c gstenumtypes.h; do \
cp $(top_builddir)/gst/$$f win32/common; done
$(top_srcdir)/tools/gst-indent win32/common/gstenumtypes.c
$(top_srcdir)/tools/gst-indent win32/common/gstenumtypes.c
cp $(top_builddir)/win32/common/config.h-new \
$(top_srcdir)/win32/common/config.h
check-enum-gettypes: $(top_builddir)/gst/gstenumtypes.h
@echo 'Checking if all enum and flag _get_type() funcs are inited in gst_init()'; \
FUNCS=`grep '_get_type (' gst/gstenumtypes.h | sed -e 's/^.*gst_/gst_/' -e 's/_get_type.*$$/_get_type/'`;\
MISSING_FUNCS=''; \
for f in $$FUNCS; do \
INIT_LINE=`grep $$f $(top_srcdir)/gst/*.c | grep g_type_class_ref`; \
if test "x$$INIT_LINE" = "x"; then \
MISSING_FUNCS="$$MISSING_FUNCS $$f"; \
fi; \
done; \
if test "x$$MISSING_FUNCS" != "x"; then \
echo "FIXME: please add to the following to gst/gst.c init_post():"; \
for f in $$MISSING_FUNCS; do \
echo " g_type_class_ref ($$f ());"; \
done; \
exit 1; \
fi; \
echo 'Checking if all enum and flag _get_type() funcs are deinited in gst_deinit()'; \
MISSING_FUNCS=''; \
for f in $$FUNCS; do \
INIT_LINE=`grep $$f $(top_srcdir)/gst/*.c | grep g_type_class_unref`; \
if test "x$$INIT_LINE" = "x"; then \
MISSING_FUNCS="$$MISSING_FUNCS $$f"; \
fi; \
done; \
if test "x$$MISSING_FUNCS" != "x"; then \
echo "FIXME: please add to the following to gst/gst.c gst_deinit():"; \
for f in $$MISSING_FUNCS; do \
echo " g_type_class_unref (g_type_class_peek ($$f ()));"; \
done; \
exit 1; \
fi
.PHONY: lcov-reset lcov lcov-run lcov-report lcov-upload lcov-clean
# run lcov from scratch, always
lcov-reset:
$(MAKE) lcov-run
$(MAKE) lcov-report
# run lcov from scratch if the dir is not there
lcov:
$(MAKE) lcov-reset
# reset lcov stats
@GST_GCOV_ENABLED_TRUE@lcov-clean:
@GST_GCOV_ENABLED_TRUE@ @-rm -rf lcov
@GST_GCOV_ENABLED_TRUE@ lcov --directory . --zerocounters
# reset run coverage tests
@GST_GCOV_ENABLED_TRUE@lcov-run:
@GST_GCOV_ENABLED_TRUE@ -$(MAKE) lcov-clean
@GST_GCOV_ENABLED_TRUE@ -if test -d tests/check; then $(MAKE) -C tests/check inspect; fi
@GST_GCOV_ENABLED_TRUE@ -$(MAKE) check
# generate report based on current coverage data
@GST_GCOV_ENABLED_TRUE@lcov-report:
@GST_GCOV_ENABLED_TRUE@ mkdir lcov
@GST_GCOV_ENABLED_TRUE@ lcov --compat-libtool --directory . --capture --output-file lcov/lcov.info
@GST_GCOV_ENABLED_TRUE@ lcov --list-full-path -l lcov/lcov.info | grep -v "`cd $(top_srcdir) && pwd`" | cut -d\| -f1 > lcov/remove
@GST_GCOV_ENABLED_TRUE@ lcov --list-full-path -l lcov/lcov.info | grep "tests/check/" | cut -d\| -f1 >> lcov/remove
@GST_GCOV_ENABLED_TRUE@ lcov --list-full-path -l lcov/lcov.info | grep "docs/plugins/" | cut -d\| -f1 >> lcov/remove
@GST_GCOV_ENABLED_TRUE@ lcov -r lcov/lcov.info `cat lcov/remove` > lcov/lcov.cleaned.info
@GST_GCOV_ENABLED_TRUE@ rm lcov/remove
@GST_GCOV_ENABLED_TRUE@ mv lcov/lcov.cleaned.info lcov/lcov.info
@GST_GCOV_ENABLED_TRUE@ genhtml -t "$(PACKAGE_STRING)" -o lcov --num-spaces 2 lcov/lcov.info
@GST_GCOV_ENABLED_TRUE@lcov-upload: lcov
@GST_GCOV_ENABLED_TRUE@ rsync -rvz -e ssh --delete lcov/* gstreamer.freedesktop.org:/srv/gstreamer.freedesktop.org/www/data/coverage/lcov/$(PACKAGE)
@GST_GCOV_ENABLED_FALSE@lcov-run:
@GST_GCOV_ENABLED_FALSE@ echo "Need to reconfigure with --enable-gcov"
@GST_GCOV_ENABLED_FALSE@lcov-report:
@GST_GCOV_ENABLED_FALSE@ echo "Need to reconfigure with --enable-gcov"
check: $(CHECK_EXPORTS) check-enum-gettypes
gst-element-check-@GST_API_VERSION@.m4: gst-element-check.m4
$(AM_V_GEN)cp $(srcdir)/gst-element-check.m4 gst-element-check-@GST_API_VERSION@.m4
check-cruft:
@cruft_files=""; cruft_dirs=""; \
for f in $(CRUFT_FILES); do \
if test -e $$f; then \
cruft_files="$$cruft_files $$f"; \
fi \
done; \
for d in $(CRUFT_DIRS); do \
if test -e $$d; then \
cruft_dirs="$$cruft_dirs $$d"; \
fi \
done; \
if test "x$$cruft_files$$cruft_dirs" != x; then \
echo; \
echo "**** CRUFT ALERT *****"; \
echo; \
echo "The following files and directories may not be needed any "; \
echo "longer (usually because a plugin has been merged into "; \
echo "another plugin, moved to a different module, or been "; \
echo "renamed), and you probably want to clean them up if you "; \
echo "don't have local changes: "; \
echo; \
for f in $$cruft_files; do echo "file $$f"; done; \
echo; \
for d in $$cruft_dirs; do echo "directory $$d"; done; \
echo; \
echo "'make clean-cruft' will remove these for you."; \
echo; \
fi
clean-cruft-dirs:
@for d in $(CRUFT_DIRS); do \
if test -e $$d; then \
rm -r "$$d" && echo "Removed directory $$d"; \
fi \
done
clean-cruft-files:
@for f in $(CRUFT_FILES); do \
if test -e $$f; then \
rm "$$f" && echo "Removed file $$f"; \
fi \
done
clean-cruft: clean-cruft-dirs clean-cruft-files
# also might want to add this to your Makefile.am:
#
# all-local: check-cruft
all-local: gst-element-check-@GST_API_VERSION@.m4 check-cruft
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: