# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2014 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# various tests to make sure we dist the win32 stuff (for MSVC builds) right

# include this snippet to add a common release: target by using
# include $(top_srcdir)/common/release.mak

# checks for left-over files in the (usually uninstalled) tree, ie. for
# stuff that best be deleted to avoid problems like having old plugin binaries
# lying around.
#
# set CRUFT_FILES and/or CRUFT_DIRS in your Makefile.am when you include this

VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/common/m4/as-ac-expand.m4 \
	$(top_srcdir)/common/m4/as-auto-alt.m4 \
	$(top_srcdir)/common/m4/as-compiler-flag.m4 \
	$(top_srcdir)/common/m4/as-gcc-inline-assembly.m4 \
	$(top_srcdir)/common/m4/as-libtool.m4 \
	$(top_srcdir)/common/m4/as-version.m4 \
	$(top_srcdir)/common/m4/ax_create_stdint_h.m4 \
	$(top_srcdir)/common/m4/ax_pthread.m4 \
	$(top_srcdir)/common/m4/gst-arch.m4 \
	$(top_srcdir)/common/m4/gst-args.m4 \
	$(top_srcdir)/common/m4/gst-check.m4 \
	$(top_srcdir)/common/m4/gst-default.m4 \
	$(top_srcdir)/common/m4/gst-dowhile.m4 \
	$(top_srcdir)/common/m4/gst-error.m4 \
	$(top_srcdir)/common/m4/gst-feature.m4 \
	$(top_srcdir)/common/m4/gst-gettext.m4 \
	$(top_srcdir)/common/m4/gst-glib2.m4 \
	$(top_srcdir)/common/m4/gst-package-release-datetime.m4 \
	$(top_srcdir)/common/m4/gst-platform.m4 \
	$(top_srcdir)/common/m4/gst-plugin-docs.m4 \
	$(top_srcdir)/common/m4/gst-plugindir.m4 \
	$(top_srcdir)/common/m4/gst.m4 \
	$(top_srcdir)/common/m4/gtk-doc.m4 \
	$(top_srcdir)/common/m4/orc.m4 $(top_srcdir)/common/m4/pkg.m4 \
	$(top_srcdir)/m4/aalib.m4 $(top_srcdir)/m4/gettext.m4 \
	$(top_srcdir)/m4/gst-fionread.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(noinst_HEADERS) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = gst-plugins-good.spec
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
HEADERS = $(noinst_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
	$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
	$(srcdir)/gst-plugins-good.spec.in \
	$(top_srcdir)/common/coverage/lcov.mak \
	$(top_srcdir)/common/cruft.mak $(top_srcdir)/common/po.mak \
	$(top_srcdir)/common/release.mak \
	$(top_srcdir)/common/win32.mak ABOUT-NLS AUTHORS COPYING \
	ChangeLog INSTALL NEWS README compile config.guess \
	config.rpath config.sub install-sh ltmain.sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
GZIP_ENV = --best
DIST_ARCHIVES = $(distdir).tar.xz
DIST_TARGETS = dist-xz
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
AALIB_CFLAGS = @AALIB_CFLAGS@
AALIB_CONFIG = @AALIB_CONFIG@
AALIB_LIBS = @AALIB_LIBS@
ACLOCAL = @ACLOCAL@
ACLOCAL_AMFLAGS = -I m4 -I common/m4
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BZ2_LIBS = @BZ2_LIBS@
CAIRO_CFLAGS = @CAIRO_CFLAGS@
CAIRO_LIBS = @CAIRO_LIBS@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFAULT_AUDIOSINK = @DEFAULT_AUDIOSINK@
DEFAULT_AUDIOSRC = @DEFAULT_AUDIOSRC@
DEFAULT_VIDEOSINK = @DEFAULT_VIDEOSINK@
DEFAULT_VIDEOSRC = @DEFAULT_VIDEOSRC@
DEFAULT_VISUALIZER = @DEFAULT_VISUALIZER@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DEPRECATED_CFLAGS = @DEPRECATED_CFLAGS@
DIRECTSOUND_CFLAGS = @DIRECTSOUND_CFLAGS@
DIRECTSOUND_LDFLAGS = @DIRECTSOUND_LDFLAGS@
DIRECTSOUND_LIBS = @DIRECTSOUND_LIBS@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
DV1394_CFLAGS = @DV1394_CFLAGS@
DV1394_LIBS = @DV1394_LIBS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ERROR_CFLAGS = @ERROR_CFLAGS@
ERROR_CXXFLAGS = @ERROR_CXXFLAGS@
ERROR_OBJCFLAGS = @ERROR_OBJCFLAGS@
EXEEXT = @EXEEXT@
FFLAGS = @FFLAGS@
FGREP = @FGREP@
FLAC_CFLAGS = @FLAC_CFLAGS@
FLAC_LIBS = @FLAC_LIBS@
GCOV = @GCOV@
GCOV_CFLAGS = @GCOV_CFLAGS@
GCOV_LIBS = @GCOV_LIBS@
GDK_PIXBUF_CFLAGS = @GDK_PIXBUF_CFLAGS@
GDK_PIXBUF_LIBS = @GDK_PIXBUF_LIBS@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GIO_CFLAGS = @GIO_CFLAGS@
GIO_LDFLAGS = @GIO_LDFLAGS@
GIO_LIBS = @GIO_LIBS@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_EXTRA_CFLAGS = @GLIB_EXTRA_CFLAGS@
GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
GLIB_LIBS = @GLIB_LIBS@
GLIB_MKENUMS = @GLIB_MKENUMS@
GLIB_PREFIX = @GLIB_PREFIX@
GLIB_REQ = @GLIB_REQ@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GREP = @GREP@
GSTPB_PLUGINS_DIR = @GSTPB_PLUGINS_DIR@
GSTPB_PREFIX = @GSTPB_PREFIX@
GST_AGE = @GST_AGE@
GST_ALL_LDFLAGS = @GST_ALL_LDFLAGS@
GST_API_VERSION = @GST_API_VERSION@
GST_BASE_CFLAGS = @GST_BASE_CFLAGS@
GST_BASE_LIBS = @GST_BASE_LIBS@
GST_CFLAGS = @GST_CFLAGS@
GST_CHECK_CFLAGS = @GST_CHECK_CFLAGS@
GST_CHECK_LIBS = @GST_CHECK_LIBS@
GST_CONTROLLER_CFLAGS = @GST_CONTROLLER_CFLAGS@
GST_CONTROLLER_LIBS = @GST_CONTROLLER_LIBS@
GST_CURRENT = @GST_CURRENT@
GST_CXXFLAGS = @GST_CXXFLAGS@
GST_LEVEL_DEFAULT = @GST_LEVEL_DEFAULT@
GST_LIBS = @GST_LIBS@
GST_LIBVERSION = @GST_LIBVERSION@
GST_LICENSE = @GST_LICENSE@
GST_LT_LDFLAGS = @GST_LT_LDFLAGS@
GST_NET_CFLAGS = @GST_NET_CFLAGS@
GST_NET_LIBS = @GST_NET_LIBS@
GST_OBJCFLAGS = @GST_OBJCFLAGS@
GST_OPTION_CFLAGS = @GST_OPTION_CFLAGS@
GST_OPTION_CXXFLAGS = @GST_OPTION_CXXFLAGS@
GST_OPTION_OBJCFLAGS = @GST_OPTION_OBJCFLAGS@
GST_PACKAGE_NAME = @GST_PACKAGE_NAME@
GST_PACKAGE_ORIGIN = @GST_PACKAGE_ORIGIN@
GST_PKG_CONFIG_PATH = @GST_PKG_CONFIG_PATH@
GST_PLUGINS_ALL = @GST_PLUGINS_ALL@
GST_PLUGINS_BASE_CFLAGS = @GST_PLUGINS_BASE_CFLAGS@
GST_PLUGINS_BASE_DIR = @GST_PLUGINS_BASE_DIR@
GST_PLUGINS_BASE_LIBS = @GST_PLUGINS_BASE_LIBS@
GST_PLUGINS_DIR = @GST_PLUGINS_DIR@
GST_PLUGINS_NONPORTED = @GST_PLUGINS_NONPORTED@
GST_PLUGINS_SELECTED = @GST_PLUGINS_SELECTED@
GST_PLUGIN_LDFLAGS = @GST_PLUGIN_LDFLAGS@
GST_PLUGIN_LIBTOOLFLAGS = @GST_PLUGIN_LIBTOOLFLAGS@
GST_PREFIX = @GST_PREFIX@
GST_REVISION = @GST_REVISION@
GST_TOOLS_DIR = @GST_TOOLS_DIR@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
GTKDOC_MKPDF = @GTKDOC_MKPDF@
GTKDOC_REBASE = @GTKDOC_REBASE@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_LIBS = @GTK_LIBS@
GTK_X11_CFLAGS = @GTK_X11_CFLAGS@
GTK_X11_LIBS = @GTK_X11_LIBS@
GUDEV_CFLAGS = @GUDEV_CFLAGS@
GUDEV_LIBS = @GUDEV_LIBS@
HAVE_AVC1394 = @HAVE_AVC1394@
HAVE_CXX = @HAVE_CXX@
HAVE_DIRECTSOUND = @HAVE_DIRECTSOUND@
HAVE_ROM1394 = @HAVE_ROM1394@
HAVE_ZLIB = @HAVE_ZLIB@
HTML_DIR = @HTML_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
JACK_0_120_1_CFLAGS = @JACK_0_120_1_CFLAGS@
JACK_0_120_1_LIBS = @JACK_0_120_1_LIBS@
JACK_1_9_7_CFLAGS = @JACK_1_9_7_CFLAGS@
JACK_1_9_7_LIBS = @JACK_1_9_7_LIBS@
JACK_CFLAGS = @JACK_CFLAGS@
JACK_LIBS = @JACK_LIBS@
JPEG_LIBS = @JPEG_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBCACA_CFLAGS = @LIBCACA_CFLAGS@
LIBCACA_LIBS = @LIBCACA_LIBS@
LIBDV_CFLAGS = @LIBDV_CFLAGS@
LIBDV_LIBS = @LIBDV_LIBS@
LIBICONV = @LIBICONV@
LIBIEC61883_CFLAGS = @LIBIEC61883_CFLAGS@
LIBIEC61883_LIBS = @LIBIEC61883_LIBS@
LIBINTL = @LIBINTL@
LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBPNG_CFLAGS = @LIBPNG_CFLAGS@
LIBPNG_LIBS = @LIBPNG_LIBS@
LIBRT = @LIBRT@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBV4L2_CFLAGS = @LIBV4L2_CFLAGS@
LIBV4L2_LIBS = @LIBV4L2_LIBS@
LIPO = @LIPO@
LN_S = @LN_S@
LOCALEDIR = @LOCALEDIR@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
NM = @NM@
NMEDIT = @NMEDIT@
OBJC = @OBJC@
OBJCDEPMODE = @OBJCDEPMODE@
OBJCFLAGS = @OBJCFLAGS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
ORCC = @ORCC@
ORCC_FLAGS = @ORCC_FLAGS@
ORC_CFLAGS = @ORC_CFLAGS@
ORC_LIBS = @ORC_LIBS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PACKAGE_VERSION_MAJOR = @PACKAGE_VERSION_MAJOR@
PACKAGE_VERSION_MICRO = @PACKAGE_VERSION_MICRO@
PACKAGE_VERSION_MINOR = @PACKAGE_VERSION_MINOR@
PACKAGE_VERSION_NANO = @PACKAGE_VERSION_NANO@
PACKAGE_VERSION_RELEASE = @PACKAGE_VERSION_RELEASE@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PLUGINDIR = @PLUGINDIR@
POSUB = @POSUB@
PROFILE_CFLAGS = @PROFILE_CFLAGS@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
PULSE_CFLAGS = @PULSE_CFLAGS@
PULSE_LIBS = @PULSE_LIBS@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
RAW1394_CFLAGS = @RAW1394_CFLAGS@
RAW1394_LIBS = @RAW1394_LIBS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHOUT2_CFLAGS = @SHOUT2_CFLAGS@
SHOUT2_LIBS = @SHOUT2_LIBS@
SOUP_CFLAGS = @SOUP_CFLAGS@
SOUP_LIBS = @SOUP_LIBS@
SPEEX_CFLAGS = @SPEEX_CFLAGS@
SPEEX_LIBS = @SPEEX_LIBS@
STRIP = @STRIP@
TAGLIB_CFLAGS = @TAGLIB_CFLAGS@
TAGLIB_CXXFLAGS = @TAGLIB_CXXFLAGS@
TAGLIB_LIBS = @TAGLIB_LIBS@
USE_NLS = @USE_NLS@
VALGRIND_CFLAGS = @VALGRIND_CFLAGS@
VALGRIND_LIBS = @VALGRIND_LIBS@
VALGRIND_PATH = @VALGRIND_PATH@
VERSION = @VERSION@
VPX_130_CFLAGS = @VPX_130_CFLAGS@
VPX_130_LIBS = @VPX_130_LIBS@
VPX_140_CFLAGS = @VPX_140_CFLAGS@
VPX_140_LIBS = @VPX_140_LIBS@
VPX_CFLAGS = @VPX_CFLAGS@
VPX_LIBS = @VPX_LIBS@
WARNING_CFLAGS = @WARNING_CFLAGS@
WARNING_CXXFLAGS = @WARNING_CXXFLAGS@
WARNING_OBJCFLAGS = @WARNING_OBJCFLAGS@
WAVPACK_CFLAGS = @WAVPACK_CFLAGS@
WAVPACK_LIBS = @WAVPACK_LIBS@
XDAMAGE_CFLAGS = @XDAMAGE_CFLAGS@
XDAMAGE_LIBS = @XDAMAGE_LIBS@
XEXT_CFLAGS = @XEXT_CFLAGS@
XEXT_LIBS = @XEXT_LIBS@
XFIXES_CFLAGS = @XFIXES_CFLAGS@
XFIXES_LIBS = @XFIXES_LIBS@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
XSHM_CFLAGS = @XSHM_CFLAGS@
XSHM_LIBS = @XSHM_LIBS@
X_CFLAGS = @X_CFLAGS@
X_LIBS = @X_LIBS@
ZLIB_LIBS = @ZLIB_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_OBJC = @ac_ct_OBJC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
ax_pthread_config = @ax_pthread_config@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
plugindir = @plugindir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc
ALWAYS_SUBDIRS = \
	gst sys ext 		\
	tests			\
	docs			\
	po			\
	common			\
	m4			\
	pkgconfig

SUBDIRS = $(ALWAYS_SUBDIRS)
DIST_SUBDIRS = $(ALWAYS_SUBDIRS)

# the MANIFEST contains all win32 related files that should be disted
win32 = $(shell cat $(top_srcdir)/win32/MANIFEST)

# wildcard is apparently not portable to other makes, hence the use of find
# these are library .def files with the symbols to export
win32defs = $(shell find $(top_srcdir)/win32/common -name '*.def')

# wildcard is apparently not portable to other makes, hence the use of find
# these are files that need to be disted with CRLF line endings:
win32crlf = $(shell find $(top_srcdir)/win32 -name '*.dsw' -o -name '*.dsp')

# include before EXTRA_DIST for win32 assignment
EXTRA_DIST = \
	gst-plugins-good.spec depcomp \
	AUTHORS COPYING NEWS README RELEASE REQUIREMENTS \
	ChangeLog gst-plugins-good.doap autogen.sh \
	$(win32)

DISTCLEANFILES = _stdint.h
noinst_HEADERS = \
	gst-libs/gst/gettext.h \
	gst-libs/gst/gst-i18n-plugin.h \
	gst-libs/gst/glib-compat-private.h


# cruft: plugins that have been merged or moved or renamed
CRUFT_FILES = \
	$(top_builddir)/common/shave \
	$(top_builddir)/common/shave-libtool \
	$(top_builddir)/gst/median/.libs/*.{so,dll,DLL,dylib} \
	$(top_builddir)/gst/qtdemux/.libs/*.{so,dll,DLL,dylib} \
	$(top_builddir)/gst/quicktime/.libs/*.{so,dll,DLL,dylib} \
	$(top_builddir)/gst/videofilter/.libs/*videoflip.{so,dll,DLL,dylib} \
	$(top_builddir)/gst/videofilter/.libs/*videobalance.{so,dll,DLL,dylib} \
	$(top_builddir)/gst/videofilter/.libs/*gamma.{so,dll,DLL,dylib}

CRUFT_DIRS = \
	$(top_srcdir)/docs/plugins/tmpl \
	$(top_srcdir)/gst/median \
	$(top_srcdir)/gst/qtdemux \
	$(top_srcdir)/gst/quicktime \
	$(top_srcdir)/ext/annodex

all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/common/win32.mak $(top_srcdir)/common/release.mak $(top_srcdir)/common/po.mak $(top_srcdir)/common/coverage/lcov.mak $(top_srcdir)/common/cruft.mak $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/common/win32.mak $(top_srcdir)/common/release.mak $(top_srcdir)/common/po.mak $(top_srcdir)/common/coverage/lcov.mak $(top_srcdir)/common/cruft.mak $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
gst-plugins-good.spec: $(top_builddir)/config.status $(srcdir)/gst-plugins-good.spec.in
	cd $(top_builddir) && $(SHELL) ./config.status $@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)
dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(HEADERS) config.h all-local
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(am__recursive_targets) all install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
	am--refresh check check-am clean clean-cscope clean-generic \
	clean-libtool cscope cscopelist-am ctags ctags-am dist \
	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
	dist-tarZ dist-xz dist-zip distcheck distclean \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-am uninstall uninstall-am

.PRECIOUS: Makefile


win32-debug:
	@echo; \
	echo win32     = $(win32); \
	echo; \
	echo win32defs = $(win32defs); \
	echo; \
	echo win32crlf = $(win32crlf); \
	echo

win32-check-crlf:
	@echo Checking win32 files for CR LF line endings ...; \
	fail=0 ; \
	for each in $(win32crlf) ; do \
	  result=`perl -e 'print grep(/\r\n/,<>)' "$$each" | wc -l`; \
	  if test "$$result" = 0 ; then \
	    echo $$each must be fixed to have CRLF line endings ; \
	    fail=1; \
	  fi ; \
	done ; \
	exit $$fail

# make sure all symbols we export on linux are defined in the win32 .def too
# (don't care about other unixes for now, it's enough if it works on one of
# the linux build bots; we assume .so )
check-exports:
	@fail=0 ; \
	for l in $(win32defs); do \
	  libbase=`basename "$$l" ".def"`; \
	  libso=`find "$(top_builddir)" -name "$$libbase-@GST_API_VERSION@.so" | grep -v /_build/ | head -n1`; \
	  libdef="$(top_srcdir)/win32/common/$$libbase.def"; \
	  if test "x$$libso" != "x"; then \
	    echo Checking symbols in $$libso; \
	    if ! ($(top_srcdir)/common/check-exports $$libdef $$libso) ; then \
	      echo "$$libdef"; \
	      if test "$$libbase" != "libgstgl"; then \
	        fail=1; \
	      fi; \
	    fi; \
	  fi; \
	done ; \
	if test $$fail != 0; then \
	  echo '-----------------------------------------------------------'; \
	  echo 'Run this to update the .def files:'; \
	  echo 'make update-exports'; \
	  echo '-----------------------------------------------------------'; \
	fi; \
	exit $$fail

update-exports:
	make check-exports 2>&1 | patch -p1
	if test -f "$(top_srcdir)/win32/common/libgstgl.def"; then \
	  git checkout "$(top_srcdir)/win32/common/libgstgl.def";  \
	fi
	git add $(top_srcdir)/win32/common/libgst*.def
	git diff --cached -- $(top_srcdir)/win32/common/
	echo '^^^--- updated and staged changes above'

# complain about nonportable printf format strings (%lld, %llu, %zu etc.)
check-nonportable-print-format:
	@fail=0 ; \
	loc=`find "$(top_srcdir)" -name '*.c' | xargs grep -n -e '%[0-9]*ll[udx]' -e '%[0-9]*z[udx]'`; \
	if test "x$$loc" != "x"; then \
	  echo "Please fix the following print format strings:" ; \
	  find "$(top_srcdir)" -name '*.c' | xargs grep -n -e '%[0-9]*ll[udx]' -e '%[0-9]*z[udx]'; \
	  fail=1; \
	fi; \
	exit $$fail

dist-hook: check-exports win32-check-crlf

release: dist
	@$(MAKE) $(PACKAGE)-$(VERSION).tar.xz.sha256sum
	@echo
	@echo "================================================================================================="
	@echo "http://gstreamer.freedesktop.org/src/$(PACKAGE)/$(PACKAGE)-$(VERSION).tar.xz"
	@cat $(PACKAGE)-$(VERSION).tar.xz.sha256sum
	@echo "================================================================================================="
	@if [ -d ~/releases/ ]; then \
	  cp -v $(PACKAGE)-$(VERSION).tar.xz ~/releases/; \
	fi
	@if [ -d ../www/data/src ]; then \
	  mv -v $(PACKAGE)-$(VERSION).tar.xz ../www/data/src/$(PACKAGE)/ ; \
	  mv -v $(PACKAGE)-$(VERSION).tar.xz.sha256sum ../www/data/src/$(PACKAGE)/ ; \
	elif [ -d ../../www/data/src ]; then \
	  mv -v $(PACKAGE)-$(VERSION).tar.xz ../../www/data/src/$(PACKAGE)/ ; \
	  mv -v $(PACKAGE)-$(VERSION).tar.xz.sha256sum ../../www/data/src/$(PACKAGE)/ ; \
	fi
	@echo "================================================================================================="

# generate sha256 sum files
%.sha256sum: %
	@sha256sum $< > $@

# check that no marshal or enumtypes files are included
# this in turn ensures that distcheck fails for missing .list files which is currently
# shadowed when the corresponding .c and .h files are included.
distcheck-hook:
	@test "x" = "x`find $(distdir) -name \*-enumtypes.[ch] | grep -v win32`" && \
	test "x" = "x`find $(distdir) -name \*-marshal.[ch]`" || \
	( echo "*** Leftover enumtypes or marshal files in the tarball." && \
	  echo "*** Make sure the following files are not disted:" && \
	  find $(distdir) -name \*-enumtypes.[ch] | grep -v win32 && \
	  find $(distdir) -name \*-marshal.[ch] && \
	  false )

# rule to download the latest .po files
download-po: $(top_srcdir)/common/download-translations
	$(top_srcdir)/common/download-translations $(PACKAGE)

check-valgrind:
	$(MAKE) -C tests/check check-valgrind

@HAVE_GST_CHECK_TRUE@check-torture:
@HAVE_GST_CHECK_TRUE@	$(MAKE) -C tests/check torture
@HAVE_GST_CHECK_TRUE@build-checks:
@HAVE_GST_CHECK_TRUE@	$(MAKE) -C tests/check build-checks
@HAVE_GST_CHECK_FALSE@check-torture:
@HAVE_GST_CHECK_FALSE@	true
@HAVE_GST_CHECK_FALSE@build-checks:
@HAVE_GST_CHECK_FALSE@	true

win32-update:
	cp $(top_builddir)/win32/common/config.h-new \
	    $(top_srcdir)/win32/common/config.h
.PHONY: lcov-reset lcov lcov-run lcov-report lcov-upload lcov-clean

# run lcov from scratch, always
lcov-reset:
	$(MAKE) lcov-run
	$(MAKE) lcov-report

# run lcov from scratch if the dir is not there
lcov:
	$(MAKE) lcov-reset

# reset lcov stats
@GST_GCOV_ENABLED_TRUE@lcov-clean:
@GST_GCOV_ENABLED_TRUE@	@-rm -rf lcov
@GST_GCOV_ENABLED_TRUE@	lcov --directory . --zerocounters

# reset run coverage tests
@GST_GCOV_ENABLED_TRUE@lcov-run:
@GST_GCOV_ENABLED_TRUE@	-$(MAKE) lcov-clean
@GST_GCOV_ENABLED_TRUE@	-if test -d tests/check; then $(MAKE) -C tests/check inspect; fi
@GST_GCOV_ENABLED_TRUE@	-$(MAKE) check

# generate report based on current coverage data
@GST_GCOV_ENABLED_TRUE@lcov-report:
@GST_GCOV_ENABLED_TRUE@	mkdir lcov
@GST_GCOV_ENABLED_TRUE@	lcov --compat-libtool --directory . --capture --output-file lcov/lcov.info
@GST_GCOV_ENABLED_TRUE@	lcov --list-full-path -l lcov/lcov.info | grep -v "`cd $(top_srcdir) && pwd`" | cut -d\| -f1 > lcov/remove
@GST_GCOV_ENABLED_TRUE@	lcov --list-full-path -l lcov/lcov.info | grep "tests/check/" | cut -d\| -f1 >> lcov/remove
@GST_GCOV_ENABLED_TRUE@	lcov --list-full-path -l lcov/lcov.info | grep "docs/plugins/" | cut -d\| -f1 >> lcov/remove
@GST_GCOV_ENABLED_TRUE@	lcov -r lcov/lcov.info `cat lcov/remove` > lcov/lcov.cleaned.info
@GST_GCOV_ENABLED_TRUE@	rm lcov/remove
@GST_GCOV_ENABLED_TRUE@	mv lcov/lcov.cleaned.info lcov/lcov.info
@GST_GCOV_ENABLED_TRUE@	genhtml -t "$(PACKAGE_STRING)" -o lcov --num-spaces 2 lcov/lcov.info

@GST_GCOV_ENABLED_TRUE@lcov-upload: lcov
@GST_GCOV_ENABLED_TRUE@	rsync -rvz -e ssh --delete lcov/* gstreamer.freedesktop.org:/srv/gstreamer.freedesktop.org/www/data/coverage/lcov/$(PACKAGE)

@GST_GCOV_ENABLED_FALSE@lcov-run:
@GST_GCOV_ENABLED_FALSE@	echo "Need to reconfigure with --enable-gcov"

@GST_GCOV_ENABLED_FALSE@lcov-report:
@GST_GCOV_ENABLED_FALSE@	echo "Need to reconfigure with --enable-gcov"

check-cruft:
	@cruft_files=""; cruft_dirs=""; \
	for f in $(CRUFT_FILES); do \
	  if test -e $$f; then \
	    cruft_files="$$cruft_files $$f"; \
	  fi \
	done; \
	for d in $(CRUFT_DIRS); do \
	  if test -e $$d; then \
	    cruft_dirs="$$cruft_dirs $$d"; \
	  fi \
	done; \
	if test "x$$cruft_files$$cruft_dirs" != x; then \
	  echo; \
	  echo "**** CRUFT ALERT *****"; \
	  echo; \
	  echo "The following files and directories may not be needed any "; \
	  echo "longer (usually because a plugin has been merged into     "; \
	  echo "another plugin, moved to a different module, or been      "; \
	  echo "renamed), and you probably want to clean them up if you   "; \
	  echo "don't have local changes:                                 "; \
	  echo; \
	  for f in $$cruft_files; do echo "file $$f"; done; \
	  echo; \
	  for d in $$cruft_dirs; do echo "directory $$d"; done; \
	  echo; \
	  echo "'make clean-cruft' will remove these for you."; \
	  echo; \
	fi

clean-cruft-dirs:
	@for d in $(CRUFT_DIRS); do \
	  if test -e $$d; then \
	    rm -r "$$d" && echo "Removed directory $$d"; \
	  fi \
	done

clean-cruft-files:
	@for f in $(CRUFT_FILES); do \
	  if test -e $$f; then \
	    rm "$$f" && echo "Removed file $$f"; \
	  fi \
	done

clean-cruft: clean-cruft-dirs clean-cruft-files

# also might want to add this to your Makefile.am:
#
# all-local: check-cruft

all-local: check-cruft

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: