| # Makefile.x86: Makefile for Linux PC |
| # You can build specific .ko name by assiging the WLAN_CHIP_ID parameter |
| # Default=wlan_mt6632_usb.ko: |
| # make -f Makefile.x86 |
| # wlan_mt7668_usb.ko: |
| # make -f Makefile.x86 WLAN_CHIP_ID=mt7668 |
| |
| LINUX_SRC=/lib/modules/$(shell uname -r)/build |
| WLAN_CHIP_ID := MT6632 |
| |
| export CONFIG_MTK_COMBO_PLATFORM=x86 |
| |
| PWD=$(shell pwd) |
| DRIVER_DIR=$(PWD) |
| |
| export CONFIG_MTK_WIFI_ONLY=m |
| export CONFIG_MTK_COMBO=m |
| export CONFIG_MTK_COMBO_WIFI=m |
| export CONFIG_MTK_COMBO_COMM=m |
| export CONFIG_MTK_COMBO_COMM_UART=m |
| export CONFIG_MTK_COMBO_COMM_SDIO=m |
| export CONFIG_MT_WIFI_CHRDEV=m |
| |
| ifneq ($(BACKPORTED_KERNEL_VERSION),) |
| export CFG_CFG80211_VERSION ?= $(BACKPORTED_KERNEL_VERSION) |
| endif |
| |
| # pcie | sdio | usb |
| ifeq ($(hif),) |
| hif=usb |
| endif |
| |
| MODULES_NAME := wlan_$(shell echo $(WLAN_CHIP_ID) | tr A-Z a-z) |
| |
| export CONFIG_MTK_COMBO_WIFI_HIF=$(hif) |
| |
| export CONFIG_MTK_COMBO_PLAT_PATH=x86 |
| |
| export CONFIG_MTK_PREALLOC_MEMORY=n |
| |
| ############################################################## |
| # Compile options |
| ############################################################## |
| #/***** Common part ******/ |
| |
| # Define maximum different channels supported for ieee80211_iface_combination setting. |
| #CFG_NUM_DIFFERENT_CHANNELS_STA=1 |
| #CFG_NUM_DIFFERENT_CHANNELS_P2P=1 |
| |
| # Define initial driver running mode. |
| # 0=RUNNING_P2P_MODE, 1=RUNNING_AP_MODE, 2=RUNNING_DUAL_AP_MODE, 3=RUNNING_P2P_AP_MODE |
| #CFG_DRIVER_INITIAL_RUNNING_MODE=3 |
| |
| # Define to enable Android wake_lock |
| #CFG_ENABLE_WAKE_LOCK=0 |
| |
| # For wpa_supplicant w/o MTK priv lib |
| # y: enable, n: disable |
| CFG_ANDROID_AOSP_PRIV_CMD=n |
| |
| #CFG_DEFAULT_DBG_LEVEL=0xF |
| |
| CFG_TX_DIRECT_USB=1 |
| |
| CFG_RX_DIRECT_USB=1 |
| |
| CFG_USB_REQ_TX_DATA_FFA_CNT=10 |
| |
| CFG_USB_REQ_TX_DATA_CNT=2 |
| |
| CFG_USB_REQ_RX_DATA_CNT=2 |
| |
| #CFG_SUPPORT_DFS_MASTER=1 |
| |
| CFG_SCAN_CHANNEL_SPECIFIED=1 |
| |
| #CFG_SUPPORT_SINGLE_SKU_LOCAL_DB=0 |
| |
| # Report all bss networks to cfg80211 when do p2p scan |
| CFG_P2P_SCAN_REPORT_ALL_BSS=0 |
| |
| # Support to change sta, p2p, ap interface names |
| # y: enable, n: disable |
| # eg. insmod wlan_mt76x8_usb.ko sta=wlan p2p=p2p ap=ap |
| CFG_DRIVER_INF_NAME_CHANGE=n |
| |
| # Support firmware auto roaming |
| #CFG_SUPPORT_ROAMING=0 |
| |
| CFG_CHIP_RESET_SUPPORT=0 |
| |
| #/***** Manage configs into compile options ******/ |
| ifneq ($(CFG_NUM_DIFFERENT_CHANNELS_STA),) |
| PLATFORM_FLAGS += -DCFG_NUM_DIFFERENT_CHANNELS_STA=$(CFG_NUM_DIFFERENT_CHANNELS_STA) |
| endif |
| |
| ifneq ($(CFG_NUM_DIFFERENT_CHANNELS_P2P),) |
| PLATFORM_FLAGS += -DCFG_NUM_DIFFERENT_CHANNELS_P2P=$(CFG_NUM_DIFFERENT_CHANNELS_P2P) |
| endif |
| |
| ifneq ($(CFG_DRIVER_INITIAL_RUNNING_MODE),) |
| PLATFORM_FLAGS += -DCFG_DRIVER_INITIAL_RUNNING_MODE=$(CFG_DRIVER_INITIAL_RUNNING_MODE) |
| endif |
| |
| ifneq ($(CFG_ENABLE_WAKE_LOCK),) |
| PLATFORM_FLAGS += -DCFG_ENABLE_WAKE_LOCK=$(CFG_ENABLE_WAKE_LOCK) |
| endif |
| |
| ifneq ($(CFG_DEFAULT_DBG_LEVEL),) |
| PLATFORM_FLAGS += -DCFG_DEFAULT_DBG_LEVEL=$(CFG_DEFAULT_DBG_LEVEL) |
| endif |
| |
| ifneq ($(CFG_TX_DIRECT_USB),) |
| PLATFORM_FLAGS += -DCFG_TX_DIRECT_USB=$(CFG_TX_DIRECT_USB) |
| endif |
| |
| ifneq ($(CFG_RX_DIRECT_USB),) |
| PLATFORM_FLAGS += -DCFG_RX_DIRECT_USB=$(CFG_RX_DIRECT_USB) |
| endif |
| |
| ifneq ($(CFG_USB_REQ_TX_DATA_FFA_CNT),) |
| PLATFORM_FLAGS += -DCFG_USB_REQ_TX_DATA_FFA_CNT=$(CFG_USB_REQ_TX_DATA_FFA_CNT) |
| endif |
| |
| ifneq ($(CFG_USB_REQ_TX_DATA_CNT),) |
| PLATFORM_FLAGS += -DCFG_USB_REQ_TX_DATA_CNT=$(CFG_USB_REQ_TX_DATA_CNT) |
| endif |
| |
| ifneq ($(CFG_USB_REQ_RX_DATA_CNT),) |
| PLATFORM_FLAGS += -DCFG_USB_REQ_RX_DATA_CNT=$(CFG_USB_REQ_RX_DATA_CNT) |
| endif |
| |
| ifneq ($(CFG_SUPPORT_ROAMING),) |
| PLATFORM_FLAGS += -DCFG_SUPPORT_ROAMING=$(CFG_SUPPORT_ROAMING) |
| endif |
| |
| ifneq ($(CFG_SUPPORT_DFS_MASTER),) |
| PLATFORM_FLAGS += -DCFG_SUPPORT_DFS_MASTER=$(CFG_SUPPORT_DFS_MASTER) |
| endif |
| |
| ifneq ($(CFG_SUPPORT_SINGLE_SKU_LOCAL_DB),) |
| PLATFORM_FLAGS += -DCFG_SUPPORT_SINGLE_SKU_LOCAL_DB=$(CFG_SUPPORT_SINGLE_SKU_LOCAL_DB) |
| endif |
| |
| ifeq ($(CFG_DRIVER_INF_NAME_CHANGE), y) |
| PLATFORM_FLAGS += -DCFG_DRIVER_INF_NAME_CHANGE |
| endif |
| |
| ifneq ($(CFG_P2P_SCAN_REPORT_ALL_BSS),) |
| PLATFORM_FLAGS += -DCFG_P2P_SCAN_REPORT_ALL_BSS=$(CFG_P2P_SCAN_REPORT_ALL_BSS) |
| endif |
| |
| ifneq ($(CFG_SCAN_CHANNEL_SPECIFIED),) |
| PLATFORM_FLAGS += -DCFG_SCAN_CHANNEL_SPECIFIED=$(CFG_SCAN_CHANNEL_SPECIFIED) |
| endif |
| |
| ifneq ($(CFG_CHIP_RESET_SUPPORT),) |
| PLATFORM_FLAGS += -DCFG_CHIP_RESET_SUPPORT=$(CFG_CHIP_RESET_SUPPORT) |
| endif |
| |
| ifeq ($(CFG_ANDROID_AOSP_PRIV_CMD), y) |
| PLATFORM_FLAGS += -DCFG_ANDROID_AOSP_PRIV_CMD |
| endif |
| |
| all: driver |
| |
| driver: |
| +cd $(DRIVER_DIR) && make -C $(LINUX_SRC) M=$(DRIVER_DIR) PLATFORM_FLAGS="$(PLATFORM_FLAGS)" WLAN_CHIP_ID=$(WLAN_CHIP_ID) modules |
| @cd $(DRIVER_DIR) && cp $(MODULES_NAME)_$(hif).ko $(MODULES_NAME).ko |
| |
| clean: driver_clean |
| |
| driver_clean: |
| cd $(DRIVER_DIR) && make -C $(LINUX_SRC) M=$(DRIVER_DIR) WLAN_CHIP_ID=$(WLAN_CHIP_ID) clean |
| |
| .PHONY: all clean driver driver_clean |