Google Git
Sign in
coral / mt7668-wifi-mod / 8fe500d6fb3b310b734a5dbb673a9c2f4a12e160 / . / common / wlan_p2p.c
blob: 7ac8a457a49e62368084442f5c8aaeedeb8fee92 [file] [log] [blame]
/******************************************************************************
*
* This file is provided under a dual license. When you use or
* distribute this software, you may choose to be licensed under
* version 2 of the GNU General Public License ("GPLv2 License")
* or BSD License.
*
* GPLv2 License
*
* Copyright(C) 2016 MediaTek Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See http://www.gnu.org/licenses/gpl-2.0.html for more details.
*
* BSD LICENSE
*
* Copyright(C) 2016 MediaTek Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
/*
** Id: //Department/DaVinci/TRUNK/WiFi_P2P_Driver/common/wlan_p2p.c#8
*/
/*! \file wlan_bow.c
* \brief This file contains the Wi-Fi Direct commands processing routines for
* MediaTek Inc. 802.11 Wireless LAN Adapters.
*/
/******************************************************************************
* C O M P I L E R F L A G S
*******************************************************************************
*/
/******************************************************************************
* E X T E R N A L R E F E R E N C E S
*******************************************************************************
*/
#include "precomp.h"
#include "gl_p2p_ioctl.h"
/******************************************************************************
* C O N S T A N T S
*******************************************************************************
*/
/******************************************************************************
* D A T A T Y P E S
*******************************************************************************
*/
/******************************************************************************
* P U B L I C D A T A
*******************************************************************************
*/
/******************************************************************************
* P R I V A T E D A T A
*******************************************************************************
*/
/******************************************************************************
* M A C R O S
*******************************************************************************
*/
/******************************************************************************
* F U N C T I O N D E C L A R A T I O N S
*******************************************************************************
*/
/******************************************************************************
* F U N C T I O N S
*******************************************************************************
*/
/*----------------------------------------------------------------------------*/
/*!
* \brief command packet generation utility
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] ucCID Command ID
* \param[in] fgSetQuery Set or Query
* \param[in] fgNeedResp Need for response
* \param[in] pfCmdDoneHandler Function pointer when command is done
* \param[in] u4SetQueryInfoLen The length of the set/query buffer
* \param[in] pucInfoBuffer Pointer to set/query buffer
*
*
* \retval WLAN_STATUS_PENDING
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSendSetQueryP2PCmd(IN P_ADAPTER_T prAdapter,
IN UINT_8 ucCID,
IN UINT_8 ucBssIdx,
IN BOOLEAN fgSetQuery,
IN BOOLEAN fgNeedResp,
IN BOOLEAN fgIsOid,
IN PFN_CMD_DONE_HANDLER pfCmdDoneHandler,
IN PFN_CMD_TIMEOUT_HANDLER pfCmdTimeoutHandler,
IN UINT_32 u4SetQueryInfoLen,
IN PUINT_8 pucInfoBuffer, OUT PVOID pvSetQueryBuffer, IN UINT_32 u4SetQueryBufferLen)
{
P_GLUE_INFO_T prGlueInfo;
P_CMD_INFO_T prCmdInfo;
P_WIFI_CMD_T prWifiCmd;
UINT_8 ucCmdSeqNum;
ASSERT(prAdapter);
prGlueInfo = prAdapter->prGlueInfo;
ASSERT(prGlueInfo);
DEBUGFUNC("wlanoidSendSetQueryP2PCmd");
DBGLOG(REQ, TRACE, "Command ID = 0x%08X\n", ucCID);
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + u4SetQueryInfoLen));
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
DBGLOG(REQ, TRACE, "ucCmdSeqNum =%d\n", ucCmdSeqNum);
/* Setup common CMD Info Packet */
prCmdInfo->eCmdType = COMMAND_TYPE_NETWORK_IOCTL;
prCmdInfo->u2InfoBufLen = (UINT_16) (CMD_HDR_SIZE + u4SetQueryInfoLen);
prCmdInfo->pfCmdDoneHandler = pfCmdDoneHandler;
prCmdInfo->pfCmdTimeoutHandler = pfCmdTimeoutHandler;
prCmdInfo->fgIsOid = fgIsOid;
prCmdInfo->ucCID = ucCID;
prCmdInfo->fgSetQuery = fgSetQuery;
prCmdInfo->fgNeedResp = fgNeedResp;
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = u4SetQueryInfoLen;
prCmdInfo->pvInformationBuffer = pvSetQueryBuffer;
prCmdInfo->u4InformationBufferLength = u4SetQueryBufferLen;
/* Setup WIFI_CMD_T (no payload) */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
if (u4SetQueryInfoLen > 0 && pucInfoBuffer != NULL)
kalMemCopy(prWifiCmd->aucBuffer, pucInfoBuffer, u4SetQueryInfoLen);
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prGlueInfo);
return WLAN_STATUS_PENDING;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set a key to Wi-Fi Direct driver
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
#if 0
WLAN_STATUS
wlanoidSetAddP2PKey(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
CMD_802_11_KEY rCmdKey;
P_PARAM_KEY_T prNewKey;
P_BSS_INFO_T prBssInfo = (P_BSS_INFO_T) NULL;
P_STA_RECORD_T prStaRec = (P_STA_RECORD_T) NULL;
DEBUGFUNC("wlanoidSetAddP2PKey");
DBGLOG(REQ, INFO, "\n");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
prNewKey = (P_PARAM_KEY_T) pvSetBuffer;
/* Verify the key structure length. */
if (prNewKey->u4Length > u4SetBufferLen) {
DBGLOG(REQ, WARN,
"Invalid key structure length (%d) greater than total buffer length (%d)\n",
(UINT_8) prNewKey->u4Length, (UINT_8) u4SetBufferLen);
*pu4SetInfoLen = u4SetBufferLen;
return WLAN_STATUS_INVALID_LENGTH;
}
/* Verify the key material length for key material buffer */
else if (prNewKey->u4KeyLength > prNewKey->u4Length - OFFSET_OF(PARAM_KEY_T, aucKeyMaterial)) {
DBGLOG(REQ, WARN, "Invalid key material length (%d)\n", (UINT_8) prNewKey->u4KeyLength);
*pu4SetInfoLen = u4SetBufferLen;
return WLAN_STATUS_INVALID_DATA;
}
/* Exception check */
else if (prNewKey->u4KeyIndex & 0x0fffff00)
return WLAN_STATUS_INVALID_DATA;
/* Exception check, pairwise key must with transmit bit enabled */
else if ((prNewKey->u4KeyIndex & BITS(30, 31)) == IS_UNICAST_KEY) {
return WLAN_STATUS_INVALID_DATA;
} else if (!(prNewKey->u4KeyLength == CCMP_KEY_LEN)
&& !(prNewKey->u4KeyLength == TKIP_KEY_LEN)) {
return WLAN_STATUS_INVALID_DATA;
}
/* Exception check, pairwise key must with transmit bit enabled */
else if ((prNewKey->u4KeyIndex & BITS(30, 31)) == BITS(30, 31)) {
if (((prNewKey->u4KeyIndex & 0xff) != 0) ||
((prNewKey->arBSSID[0] == 0xff) && (prNewKey->arBSSID[1] == 0xff)
&& (prNewKey->arBSSID[2] == 0xff) && (prNewKey->arBSSID[3] == 0xff)
&& (prNewKey->arBSSID[4] == 0xff) && (prNewKey->arBSSID[5] == 0xff))) {
return WLAN_STATUS_INVALID_DATA;
}
}
*pu4SetInfoLen = u4SetBufferLen;
prBssInfo = GET_BSS_INFO_BY_INDEX(prAdapter, prNewKey->ucBssIdx);
ASSERT(prBssInfo);
#if 0
if (prBssInfo->ucBMCWlanIndex >= WTBL_SIZE) {
prBssInfo->ucBMCWlanIndex =
secPrivacySeekForBcEntry(prAdapter, prBssInfo->ucBssIndex, prBssInfo->aucBSSID,
0xff, CIPHER_SUITE_NONE, 0xff);
}
#endif
/* fill CMD_802_11_KEY */
kalMemZero(&rCmdKey, sizeof(CMD_802_11_KEY));
rCmdKey.ucAddRemove = 1; /* add */
rCmdKey.ucTxKey = ((prNewKey->u4KeyIndex & IS_TRANSMIT_KEY) == IS_TRANSMIT_KEY) ? 1 : 0;
rCmdKey.ucKeyType = ((prNewKey->u4KeyIndex & IS_UNICAST_KEY) == IS_UNICAST_KEY) ? 1 : 0;
#if 0
if (prBssInfo->eCurrentOPMode == OP_MODE_INFRASTRUCTURE) { /* group client */
#else
if (kalP2PGetRole(prAdapter->prGlueInfo) == 1) { /* group client */
#endif
rCmdKey.ucIsAuthenticator = 0;
} else { /* group owner */
rCmdKey.ucIsAuthenticator = 1;
/* Force to set GO/AP Tx */
rCmdKey.ucTxKey = 1;
}
COPY_MAC_ADDR(rCmdKey.aucPeerAddr, prNewKey->arBSSID);
rCmdKey.ucBssIdx = prNewKey->ucBssIdx;
if (prNewKey->u4KeyLength == CCMP_KEY_LEN)
rCmdKey.ucAlgorithmId = CIPHER_SUITE_CCMP; /* AES */
else if (prNewKey->u4KeyLength == TKIP_KEY_LEN)
rCmdKey.ucAlgorithmId = CIPHER_SUITE_TKIP; /* TKIP */
else if (prNewKey->u4KeyLength == WEP_40_LEN)
rCmdKey.ucAlgorithmId = CIPHER_SUITE_WEP40; /* WEP 40 */
else if (prNewKey->u4KeyLength == WEP_104_LEN)
rCmdKey.ucAlgorithmId = CIPHER_SUITE_WEP104; /* WEP 104 */
else
ASSERT(FALSE);
rCmdKey.ucKeyId = (UINT_8) (prNewKey->u4KeyIndex & 0xff);
rCmdKey.ucKeyLen = (UINT_8) prNewKey->u4KeyLength;
kalMemCopy(rCmdKey.aucKeyMaterial, (PUINT_8) prNewKey->aucKeyMaterial, rCmdKey.ucKeyLen);
if ((rCmdKey.aucPeerAddr[0] & rCmdKey.aucPeerAddr[1] & rCmdKey.aucPeerAddr[2] &
rCmdKey.aucPeerAddr[3] & rCmdKey.aucPeerAddr[4] & rCmdKey.aucPeerAddr[5]) == 0xFF) {
kalMemCopy(rCmdKey.aucPeerAddr, prBssInfo->aucBSSID, MAC_ADDR_LEN);
if (!rCmdKey.ucIsAuthenticator) {
prStaRec = cnmGetStaRecByAddress(prAdapter, rCmdKey.ucBssIdx, rCmdKey.aucPeerAddr);
if (!prStaRec)
ASSERT(FALSE);
}
} else {
prStaRec = cnmGetStaRecByAddress(prAdapter, rCmdKey.ucBssIdx, rCmdKey.aucPeerAddr);
}
if (rCmdKey.ucTxKey) {
if (prStaRec) {
if (rCmdKey.ucKeyType) { /* RSN STA */
ASSERT(prStaRec->ucWlanIndex < WTBL_SIZE);
rCmdKey.ucWlanIndex = prStaRec->ucWlanIndex;
prStaRec->fgTransmitKeyExist = TRUE; /* wait for CMD Done ? */
} else {
ASSERT(FALSE);
}
} else {
if (prBssInfo) { /* GO/AP Tx BC */
ASSERT(prBssInfo->ucBMCWlanIndex < WTBL_SIZE);
rCmdKey.ucWlanIndex = prBssInfo->ucBMCWlanIndex;
prBssInfo->fgBcDefaultKeyExist = TRUE;
prBssInfo->ucTxDefaultKeyID = rCmdKey.ucKeyId;
} else {
rCmdKey.ucWlanIndex = 255; /* GC WEP Tx key ? */
ASSERT(FALSE);
}
}
} else {
if (((rCmdKey.aucPeerAddr[0] & rCmdKey.aucPeerAddr[1] & rCmdKey.aucPeerAddr[2] &
rCmdKey.aucPeerAddr[3] & rCmdKey.aucPeerAddr[4] & rCmdKey.aucPeerAddr[5]) == 0xFF)
||
((rCmdKey.aucPeerAddr[0] | rCmdKey.aucPeerAddr[1] | rCmdKey.
aucPeerAddr[2] | rCmdKey.aucPeerAddr[3] | rCmdKey.aucPeerAddr[4] | rCmdKey.aucPeerAddr[5]) ==
0x00)) {
rCmdKey.ucWlanIndex = 255; /* GC WEP ? */
ASSERT(FALSE);
} else {
if (prStaRec) { /* GC Rx RSN Group key */
rCmdKey.ucWlanIndex =
secPrivacySeekForBcEntry(prAdapter, prStaRec->ucBssIndex,
prStaRec->aucMacAddr,
prStaRec->ucIndex, rCmdKey.ucAlgorithmId, rCmdKey.ucKeyId);
prStaRec->ucBMCWlanIndex = rCmdKey.ucWlanIndex;
ASSERT(prStaRec->ucBMCWlanIndex < WTBL_SIZE);
} else { /* Exist this case ? */
ASSERT(FALSE);
}
}
}
return wlanoidSendSetQueryP2PCmd(prAdapter,
CMD_ID_ADD_REMOVE_KEY,
prNewKey->ucBssIdx,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
NULL,
sizeof(CMD_802_11_KEY), (PUINT_8)&rCmdKey, pvSetBuffer, u4SetBufferLen);
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to request Wi-Fi Direct driver to remove keys
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetRemoveP2PKey(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
CMD_802_11_KEY rCmdKey;
P_PARAM_REMOVE_KEY_T prRemovedKey;
P_BSS_INFO_T prBssInfo = (P_BSS_INFO_T) NULL;
P_STA_RECORD_T prStaRec = (P_STA_RECORD_T) NULL;
DEBUGFUNC("wlanoidSetRemoveP2PKey");
ASSERT(prAdapter);
if (u4SetBufferLen < sizeof(PARAM_REMOVE_KEY_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prRemovedKey = (P_PARAM_REMOVE_KEY_T) pvSetBuffer;
/* Check bit 31: this bit should always 0 */
if (prRemovedKey->u4KeyIndex & IS_TRANSMIT_KEY) {
/* Bit 31 should not be set */
DBGLOG(REQ, ERROR, "invalid key index: 0x%08lx\n", prRemovedKey->u4KeyIndex);
return WLAN_STATUS_INVALID_DATA;
}
/* Check bits 8 ~ 29 should always be 0 */
if (prRemovedKey->u4KeyIndex & BITS(8, 29)) {
/* Bit 31 should not be set */
DBGLOG(REQ, ERROR, "invalid key index: 0x%08lx\n", prRemovedKey->u4KeyIndex);
return WLAN_STATUS_INVALID_DATA;
}
prBssInfo = GET_BSS_INFO_BY_INDEX(prAdapter, prRemovedKey->ucBssIdx);
kalMemZero((PUINT_8)&rCmdKey, sizeof(CMD_802_11_KEY));
rCmdKey.ucAddRemove = 0; /* remove */
if (prBssInfo->eCurrentOPMode == OP_MODE_INFRASTRUCTURE) { /* group client */
rCmdKey.ucIsAuthenticator = 0;
} else { /* group owner */
rCmdKey.ucIsAuthenticator = 1;
}
kalMemCopy(rCmdKey.aucPeerAddr, (PUINT_8) prRemovedKey->arBSSID, MAC_ADDR_LEN);
rCmdKey.ucBssIdx = prRemovedKey->ucBssIdx;
rCmdKey.ucKeyId = (UINT_8) (prRemovedKey->u4KeyIndex & 0x000000ff);
/* Clean up the Tx key flag */
prStaRec = cnmGetStaRecByAddress(prAdapter, prRemovedKey->ucBssIdx, prRemovedKey->arBSSID);
/* mark for MR1 to avoid remove-key, but remove the wlan_tbl0 at the same time */
if (1 /*prRemovedKey->u4KeyIndex & IS_UNICAST_KEY */) {
if (prStaRec) {
rCmdKey.ucKeyType = 1;
rCmdKey.ucWlanIndex = prStaRec->ucWlanIndex;
prStaRec->fgTransmitKeyExist = FALSE;
} else if (rCmdKey.ucIsAuthenticator)
prBssInfo->fgBcDefaultKeyExist = FALSE;
} else {
if (rCmdKey.ucIsAuthenticator)
prBssInfo->fgBcDefaultKeyExist = FALSE;
}
if (!prStaRec) {
if (prAdapter->rWifiVar.rConnSettings.eAuthMode < AUTH_MODE_WPA
&& prAdapter->rWifiVar.rConnSettings.eEncStatus != ENUM_ENCRYPTION_DISABLED) {
rCmdKey.ucWlanIndex = prBssInfo->ucBMCWlanIndex;
} else {
rCmdKey.ucWlanIndex = WTBL_RESERVED_ENTRY;
return WLAN_STATUS_SUCCESS;
}
}
/* mark for MR1 to avoid remove-key, but remove the wlan_tbl0 at the same time */
/* secPrivacyFreeForEntry(prAdapter, rCmdKey.ucWlanIndex); */
return wlanoidSendSetQueryP2PCmd(prAdapter,
CMD_ID_ADD_REMOVE_KEY,
prRemovedKey->ucBssIdx,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
NULL,
sizeof(CMD_802_11_KEY), (PUINT_8)&rCmdKey, pvSetBuffer, u4SetBufferLen);
}
#endif
/*----------------------------------------------------------------------------*/
/*!
* \brief Setting the IP address for pattern search function.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \return WLAN_STATUS_SUCCESS
* \return WLAN_STATUS_ADAPTER_NOT_READY
* \return WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetP2pNetworkAddress(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
UINT_32 i, j;
P_CMD_SET_NETWORK_ADDRESS_LIST prCmdNetworkAddressList;
P_PARAM_NETWORK_ADDRESS_LIST prNetworkAddressList = (P_PARAM_NETWORK_ADDRESS_LIST) pvSetBuffer;
P_PARAM_NETWORK_ADDRESS prNetworkAddress;
P_PARAM_NETWORK_ADDRESS_IP prNetAddrIp;
UINT_32 u4IpAddressCount, u4CmdSize;
DEBUGFUNC("wlanoidSetP2pNetworkAddress");
DBGLOG(INIT, TRACE, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 4;
if (u4SetBufferLen < sizeof(PARAM_NETWORK_ADDRESS_LIST))
return WLAN_STATUS_INVALID_DATA;
*pu4SetInfoLen = 0;
u4IpAddressCount = 0;
prNetworkAddress = prNetworkAddressList->arAddress;
for (i = 0; i < prNetworkAddressList->u4AddressCount; i++) {
if (prNetworkAddress->u2AddressType == PARAM_PROTOCOL_ID_TCP_IP &&
prNetworkAddress->u2AddressLength == sizeof(PARAM_NETWORK_ADDRESS_IP)) {
u4IpAddressCount++;
}
prNetworkAddress = (P_PARAM_NETWORK_ADDRESS) ((ULONG) prNetworkAddress +
(ULONG) (prNetworkAddress->u2AddressLength +
OFFSET_OF(PARAM_NETWORK_ADDRESS, aucAddress)));
}
/* construct payload of command packet */
u4CmdSize = OFFSET_OF(CMD_SET_NETWORK_ADDRESS_LIST, arNetAddress) +
sizeof(IPV4_NETWORK_ADDRESS) * u4IpAddressCount;
prCmdNetworkAddressList = (P_CMD_SET_NETWORK_ADDRESS_LIST) kalMemAlloc(u4CmdSize, VIR_MEM_TYPE);
if (prCmdNetworkAddressList == NULL)
return WLAN_STATUS_FAILURE;
/* fill P_CMD_SET_NETWORK_ADDRESS_LIST */
prCmdNetworkAddressList->ucBssIndex = prNetworkAddressList->ucBssIdx;
prCmdNetworkAddressList->ucAddressCount = (UINT_8) u4IpAddressCount;
prNetworkAddress = prNetworkAddressList->arAddress;
for (i = 0, j = 0; i < prNetworkAddressList->u4AddressCount; i++) {
if (prNetworkAddress->u2AddressType == PARAM_PROTOCOL_ID_TCP_IP &&
prNetworkAddress->u2AddressLength == sizeof(PARAM_NETWORK_ADDRESS_IP)) {
prNetAddrIp = (P_PARAM_NETWORK_ADDRESS_IP) prNetworkAddress->aucAddress;
kalMemCopy(prCmdNetworkAddressList->arNetAddress[j].aucIpAddr,
&(prNetAddrIp->in_addr), sizeof(UINT_32));
j++;
}
prNetworkAddress = (P_PARAM_NETWORK_ADDRESS) ((ULONG) prNetworkAddress +
(ULONG) (prNetworkAddress->u2AddressLength +
OFFSET_OF(PARAM_NETWORK_ADDRESS, aucAddress)));
}
rStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_IP_ADDRESS,
TRUE,
FALSE,
TRUE,
nicCmdEventSetIpAddress,
nicOidCmdTimeoutCommon,
u4CmdSize, (PUINT_8) prCmdNetworkAddressList, pvSetBuffer, u4SetBufferLen);
kalMemFree(prCmdNetworkAddressList, VIR_MEM_TYPE, u4CmdSize);
return rStatus;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is used to query the power save profile.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \return WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryP2pPowerSaveProfile(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryP2pPowerSaveProfile");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen != 0) {
ASSERT(pvQueryBuffer);
/* TODO: FIXME */
/* *(PPARAM_POWER_MODE) pvQueryBuffer =
* (PARAM_POWER_MODE)(prAdapter->rWlanInfo.arPowerSaveMode[P2P_DEV_BSS_INDEX].ucPsProfile);
*/
/* *pu4QueryInfoLen = sizeof(PARAM_POWER_MODE); */
}
return WLAN_STATUS_SUCCESS;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is used to set the power save profile.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetP2pPowerSaveProfile(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS status;
PARAM_POWER_MODE ePowerMode;
DEBUGFUNC("wlanoidSetP2pPowerSaveProfile");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_POWER_MODE);
if (u4SetBufferLen < sizeof(PARAM_POWER_MODE)) {
DBGLOG(REQ, WARN, "Invalid length %ld\n", u4SetBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
} else if (*(PPARAM_POWER_MODE) pvSetBuffer >= Param_PowerModeMax) {
DBGLOG(REQ, WARN, "Invalid power mode %d\n", *(PPARAM_POWER_MODE) pvSetBuffer);
return WLAN_STATUS_INVALID_DATA;
}
ePowerMode = *(PPARAM_POWER_MODE) pvSetBuffer;
if (prAdapter->fgEnCtiaPowerMode) {
if (ePowerMode == Param_PowerModeCAM) {
/*Todo:: Nothing */
/*Todo:: Nothing */
} else {
/* User setting to PS mode (Param_PowerModeMAX_PSP or Param_PowerModeFast_PSP) */
if (prAdapter->u4CtiaPowerMode == 0) {
/* force to keep in CAM mode */
ePowerMode = Param_PowerModeCAM;
} else if (prAdapter->u4CtiaPowerMode == 1) {
ePowerMode = Param_PowerModeMAX_PSP;
} else if (prAdapter->u4CtiaPowerMode == 2) {
ePowerMode = Param_PowerModeFast_PSP;
}
}
}
status = nicConfigPowerSaveProfile(prAdapter, P2P_DEV_BSS_INDEX, /* TODO: FIXME */
ePowerMode, TRUE);
return status;
} /* end of wlanoidSetP2pPowerSaveProfile() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is used to set the power save profile.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetP2pSetNetworkAddress(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
UINT_32 i, j;
P_CMD_SET_NETWORK_ADDRESS_LIST prCmdNetworkAddressList;
P_PARAM_NETWORK_ADDRESS_LIST prNetworkAddressList = (P_PARAM_NETWORK_ADDRESS_LIST) pvSetBuffer;
P_PARAM_NETWORK_ADDRESS prNetworkAddress;
P_PARAM_NETWORK_ADDRESS_IP prNetAddrIp;
UINT_32 u4IpAddressCount, u4CmdSize;
PUINT_8 pucBuf = (PUINT_8) pvSetBuffer;
DEBUGFUNC("wlanoidSetP2pSetNetworkAddress");
DBGLOG(INIT, TRACE, "\n");
DBGLOG(INIT, INFO, "wlanoidSetP2pSetNetworkAddress (%d)\n", (INT_16) u4SetBufferLen);
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 4;
if (u4SetBufferLen < sizeof(PARAM_NETWORK_ADDRESS_LIST))
return WLAN_STATUS_INVALID_DATA;
*pu4SetInfoLen = 0;
u4IpAddressCount = 0;
prNetworkAddress = prNetworkAddressList->arAddress;
for (i = 0; i < prNetworkAddressList->u4AddressCount; i++) {
if (prNetworkAddress->u2AddressType == PARAM_PROTOCOL_ID_TCP_IP &&
prNetworkAddress->u2AddressLength == sizeof(PARAM_NETWORK_ADDRESS_IP)) {
u4IpAddressCount++;
}
prNetworkAddress = (P_PARAM_NETWORK_ADDRESS) ((ULONG) prNetworkAddress +
(ULONG) (prNetworkAddress->u2AddressLength +
OFFSET_OF(PARAM_NETWORK_ADDRESS, aucAddress)));
}
/* construct payload of command packet */
u4CmdSize = OFFSET_OF(CMD_SET_NETWORK_ADDRESS_LIST, arNetAddress) +
sizeof(IPV4_NETWORK_ADDRESS) * u4IpAddressCount;
if (u4IpAddressCount == 0)
u4CmdSize = sizeof(CMD_SET_NETWORK_ADDRESS_LIST);
prCmdNetworkAddressList = (P_CMD_SET_NETWORK_ADDRESS_LIST) kalMemAlloc(u4CmdSize, VIR_MEM_TYPE);
if (prCmdNetworkAddressList == NULL)
return WLAN_STATUS_FAILURE;
/* fill P_CMD_SET_NETWORK_ADDRESS_LIST */
prCmdNetworkAddressList->ucBssIndex = prNetworkAddressList->ucBssIdx;
/* only to set IP address to FW once ARP filter is enabled */
if (prAdapter->fgEnArpFilter) {
prCmdNetworkAddressList->ucAddressCount = (UINT_8) u4IpAddressCount;
prNetworkAddress = prNetworkAddressList->arAddress;
DBGLOG(INIT, INFO, "u4IpAddressCount (%ld)\n", (INT_32) u4IpAddressCount);
for (i = 0, j = 0; i < prNetworkAddressList->u4AddressCount; i++) {
if (prNetworkAddress->u2AddressType == PARAM_PROTOCOL_ID_TCP_IP &&
prNetworkAddress->u2AddressLength == sizeof(PARAM_NETWORK_ADDRESS_IP)) {
prNetAddrIp = (P_PARAM_NETWORK_ADDRESS_IP) prNetworkAddress->aucAddress;
kalMemCopy(prCmdNetworkAddressList->arNetAddress[j].aucIpAddr,
&(prNetAddrIp->in_addr), sizeof(UINT_32));
j++;
pucBuf = (PUINT_8) &prNetAddrIp->in_addr;
DBGLOG(INIT, INFO, "prNetAddrIp->in_addr:%d:%d:%d:%d\n",
(UINT_8) pucBuf[0], (UINT_8) pucBuf[1], (UINT_8) pucBuf[2], (UINT_8) pucBuf[3]);
}
prNetworkAddress = (P_PARAM_NETWORK_ADDRESS) ((ULONG) prNetworkAddress +
(ULONG) (prNetworkAddress->u2AddressLength +
OFFSET_OF
(PARAM_NETWORK_ADDRESS, aucAddress)));
}
} else {
prCmdNetworkAddressList->ucAddressCount = 0;
}
rStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_IP_ADDRESS,
TRUE,
FALSE,
TRUE,
nicCmdEventSetIpAddress,
nicOidCmdTimeoutCommon,
u4CmdSize, (PUINT_8) prCmdNetworkAddressList, pvSetBuffer, u4SetBufferLen);
kalMemFree(prCmdNetworkAddressList, VIR_MEM_TYPE, u4CmdSize);
return rStatus;
} /* end of wlanoidSetP2pSetNetworkAddress() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set Multicast Address List.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_MULTICAST_FULL
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetP2PMulticastList(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
CMD_MAC_MCAST_ADDR rCmdMacMcastAddr;
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
/* The data must be a multiple of the Ethernet address size. */
if ((u4SetBufferLen % MAC_ADDR_LEN)) {
DBGLOG(REQ, WARN, "Invalid MC list length %ld\n", u4SetBufferLen);
*pu4SetInfoLen = (((u4SetBufferLen + MAC_ADDR_LEN) - 1) / MAC_ADDR_LEN) * MAC_ADDR_LEN;
return WLAN_STATUS_INVALID_LENGTH;
}
*pu4SetInfoLen = u4SetBufferLen;
/* Verify if we can support so many multicast addresses. */
if (u4SetBufferLen > MAX_NUM_GROUP_ADDR * MAC_ADDR_LEN) {
DBGLOG(REQ, WARN, "Too many MC addresses\n");
return WLAN_STATUS_MULTICAST_FULL;
}
/* NOTE(Kevin): Windows may set u4SetBufferLen == 0 &&
* pvSetBuffer == NULL to clear exist Multicast List.
*/
if (u4SetBufferLen)
ASSERT(pvSetBuffer);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set multicast list! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
rCmdMacMcastAddr.u4NumOfGroupAddr = u4SetBufferLen / MAC_ADDR_LEN;
rCmdMacMcastAddr.ucBssIndex = P2P_DEV_BSS_INDEX; /* TODO: */
kalMemCopy(rCmdMacMcastAddr.arAddress, pvSetBuffer, u4SetBufferLen);
return wlanoidSendSetQueryP2PCmd(prAdapter, CMD_ID_MAC_MCAST_ADDR, P2P_DEV_BSS_INDEX,
/* TODO: */
/* This CMD response is no need to complete the OID. Or the event would unsync. */
TRUE, FALSE, FALSE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_MAC_MCAST_ADDR),
(PUINT_8) &rCmdMacMcastAddr, pvSetBuffer, u4SetBufferLen);
} /* end of wlanoidSetP2PMulticastList() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to send GAS frame for P2P Service Discovery Request
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_MULTICAST_FULL
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSendP2PSDRequest(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
if (u4SetBufferLen)
ASSERT(pvSetBuffer);
if (u4SetBufferLen < sizeof(PARAM_P2P_SEND_SD_REQUEST)) {
*pu4SetInfoLen = sizeof(PARAM_P2P_SEND_SD_REQUEST);
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
/* rWlanStatus = p2pFsmRunEventSDRequest(prAdapter, (P_PARAM_P2P_SEND_SD_REQUEST)pvSetBuffer); */
return rWlanStatus;
} /* end of wlanoidSendP2PSDRequest() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to send GAS frame for P2P Service Discovery Response
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_MULTICAST_FULL
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSendP2PSDResponse(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
if (u4SetBufferLen)
ASSERT(pvSetBuffer);
if (u4SetBufferLen < sizeof(PARAM_P2P_SEND_SD_RESPONSE)) {
*pu4SetInfoLen = sizeof(PARAM_P2P_SEND_SD_RESPONSE);
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
/* rWlanStatus = p2pFsmRunEventSDResponse(prAdapter, (P_PARAM_P2P_SEND_SD_RESPONSE)pvSetBuffer); */
return rWlanStatus;
} /* end of wlanoidGetP2PSDRequest() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to get GAS frame for P2P Service Discovery Request
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_MULTICAST_FULL
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidGetP2PSDRequest(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
/* PUINT_8 pucChannelNum = NULL; */
/* UINT_8 ucChannelNum = 0, ucSeqNum = 0; */
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (u4QueryBufferLen < sizeof(PARAM_P2P_GET_SD_REQUEST)) {
*pu4QueryInfoLen = sizeof(PARAM_P2P_GET_SD_REQUEST);
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
DBGLOG(P2P, TRACE, "Get Service Discovery Request\n");
*pu4QueryInfoLen = 0;
return rWlanStatus;
} /* end of wlanoidGetP2PSDRequest() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to get GAS frame for P2P Service Discovery Response
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_MULTICAST_FULL
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidGetP2PSDResponse(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
/* UINT_8 ucSeqNum = 0, */
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (u4QueryBufferLen < sizeof(PARAM_P2P_GET_SD_RESPONSE)) {
*pu4QueryInfoLen = sizeof(PARAM_P2P_GET_SD_RESPONSE);
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
DBGLOG(P2P, TRACE, "Get Service Discovery Response\n");
*pu4QueryInfoLen = 0;
return rWlanStatus;
} /* end of wlanoidGetP2PSDResponse() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to terminate P2P Service Discovery Phase
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_MULTICAST_FULL
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetP2PTerminateSDPhase(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
P_PARAM_P2P_TERMINATE_SD_PHASE prP2pTerminateSD = (P_PARAM_P2P_TERMINATE_SD_PHASE) NULL;
UINT_8 aucNullAddr[] = NULL_MAC_ADDR;
do {
if ((prAdapter == NULL) || (pu4SetInfoLen == NULL))
break;
if ((u4SetBufferLen) && (pvSetBuffer == NULL))
break;
if (u4SetBufferLen < sizeof(PARAM_P2P_TERMINATE_SD_PHASE)) {
*pu4SetInfoLen = sizeof(PARAM_P2P_TERMINATE_SD_PHASE);
rWlanStatus = WLAN_STATUS_BUFFER_TOO_SHORT;
break;
}
prP2pTerminateSD = (P_PARAM_P2P_TERMINATE_SD_PHASE) pvSetBuffer;
if (EQUAL_MAC_ADDR(prP2pTerminateSD->rPeerAddr, aucNullAddr)) {
DBGLOG(P2P, TRACE, "Service Discovery Version 2.0\n");
/* p2pFuncSetVersionNumOfSD(prAdapter, 2); */
}
/* rWlanStatus = p2pFsmRunEventSDAbort(prAdapter); */
} while (FALSE);
return rWlanStatus;
} /* end of wlanoidSetP2PTerminateSDPhase() */
#if CFG_SUPPORT_ANTI_PIRACY
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_MULTICAST_FULL
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetSecCheckRequest(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
if (u4SetBufferLen)
ASSERT(pvSetBuffer);
#if 0 /* Comment it because CMD_ID_SEC_CHECK is not defined */
return wlanoidSendSetQueryP2PCmd(prAdapter,
CMD_ID_SEC_CHECK,
P2P_DEV_BSS_INDEX,
FALSE,
TRUE,
TRUE,
NULL,
nicOidCmdTimeoutCommon,
u4SetBufferLen, (PUINT_8) pvSetBuffer, pvSetBuffer, u4SetBufferLen);
#else
return WLAN_STATUS_NOT_SUPPORTED;
#endif
} /* end of wlanoidSetSecCheckRequest() */
#if 0
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_MULTICAST_FULL
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidGetSecCheckResponse(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
/* P_WLAN_MAC_HEADER_T prWlanHdr = (P_WLAN_MAC_HEADER_T)NULL; */
P_GLUE_INFO_T prGlueInfo;
prGlueInfo = prAdapter->prGlueInfo;
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (u4QueryBufferLen > 256)
u4QueryBufferLen = 256;
*pu4QueryInfoLen = u4QueryBufferLen;
#if DBG
DBGLOG_MEM8(SEC, LOUD, prGlueInfo->prP2PInfo[0]->aucSecCheckRsp, u4QueryBufferLen);
#endif
kalMemCopy((PUINT_8) (pvQueryBuffer + OFFSET_OF(IW_P2P_TRANSPORT_STRUCT, aucBuffer)),
prGlueInfo->prP2PInfo[0]->aucSecCheckRsp, u4QueryBufferLen);
return rWlanStatus;
} /* end of wlanoidGetSecCheckResponse() */
#endif
#endif
WLAN_STATUS
wlanoidSetNoaParam(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_NOA_PARAM_STRUCT_T prNoaParam;
CMD_CUSTOM_NOA_PARAM_STRUCT_T rCmdNoaParam;
DEBUGFUNC("wlanoidSetNoaParam");
DBGLOG(INIT, TRACE, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_NOA_PARAM_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_NOA_PARAM_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prNoaParam = (P_PARAM_CUSTOM_NOA_PARAM_STRUCT_T) pvSetBuffer;
kalMemZero(&rCmdNoaParam, sizeof(CMD_CUSTOM_NOA_PARAM_STRUCT_T));
rCmdNoaParam.u4NoaDurationMs = prNoaParam->u4NoaDurationMs;
rCmdNoaParam.u4NoaIntervalMs = prNoaParam->u4NoaIntervalMs;
rCmdNoaParam.u4NoaCount = prNoaParam->u4NoaCount;
#if 0
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_NOA_PARAM,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_CUSTOM_NOA_PARAM_STRUCT_T),
(PUINT_8) &rCmdNoaParam, pvSetBuffer, u4SetBufferLen);
#else
return wlanoidSendSetQueryP2PCmd(prAdapter,
CMD_ID_SET_NOA_PARAM,
prNoaParam->ucBssIdx,
TRUE,
FALSE,
TRUE,
NULL,
nicOidCmdTimeoutCommon,
sizeof(CMD_CUSTOM_NOA_PARAM_STRUCT_T),
(PUINT_8) &rCmdNoaParam, pvSetBuffer, u4SetBufferLen);
#endif
}
WLAN_STATUS
wlanoidSetOppPsParam(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_OPPPS_PARAM_STRUCT_T prOppPsParam;
CMD_CUSTOM_OPPPS_PARAM_STRUCT_T rCmdOppPsParam;
DEBUGFUNC("wlanoidSetOppPsParam");
DBGLOG(INIT, TRACE, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_OPPPS_PARAM_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_OPPPS_PARAM_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prOppPsParam = (P_PARAM_CUSTOM_OPPPS_PARAM_STRUCT_T) pvSetBuffer;
kalMemZero(&rCmdOppPsParam, sizeof(CMD_CUSTOM_OPPPS_PARAM_STRUCT_T));
rCmdOppPsParam.ucBssIdx = prOppPsParam->ucBssIdx;
if (prOppPsParam->ucOppPs) {
/* [spec. 3.3.2] CTWindow should be at least 10 TU */
if (prOppPsParam->u4CTwindowMs < 10)
rCmdOppPsParam.u4CTwindowMs = 10;
else
rCmdOppPsParam.u4CTwindowMs = prOppPsParam->u4CTwindowMs;
} else
rCmdOppPsParam.u4CTwindowMs = 0;/* Set 0 means disable OppPs */
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_OPPPS_PARAM,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_CUSTOM_OPPPS_PARAM_STRUCT_T),
(PUINT_8)&rCmdOppPsParam, pvSetBuffer, u4SetBufferLen);
}
WLAN_STATUS
wlanoidSetUApsdParam(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_UAPSD_PARAM_STRUCT_T prUapsdParam;
CMD_CUSTOM_UAPSD_PARAM_STRUCT_T rCmdUapsdParam;
P_PM_PROFILE_SETUP_INFO_T prPmProfSetupInfo;
P_BSS_INFO_T prBssInfo;
DEBUGFUNC("wlanoidSetUApsdParam");
DBGLOG(INIT, TRACE, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_UAPSD_PARAM_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_UAPSD_PARAM_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prUapsdParam = (P_PARAM_CUSTOM_UAPSD_PARAM_STRUCT_T) pvSetBuffer;
prBssInfo = GET_BSS_INFO_BY_INDEX(prAdapter, prUapsdParam->ucBssIdx);
prPmProfSetupInfo = &prBssInfo->rPmProfSetupInfo;
kalMemZero(&rCmdUapsdParam, sizeof(CMD_CUSTOM_OPPPS_PARAM_STRUCT_T));
rCmdUapsdParam.fgEnAPSD = prUapsdParam->fgEnAPSD;
rCmdUapsdParam.fgEnAPSD_AcBe = prUapsdParam->fgEnAPSD_AcBe;
rCmdUapsdParam.fgEnAPSD_AcBk = prUapsdParam->fgEnAPSD_AcBk;
rCmdUapsdParam.fgEnAPSD_AcVo = prUapsdParam->fgEnAPSD_AcVo;
rCmdUapsdParam.fgEnAPSD_AcVi = prUapsdParam->fgEnAPSD_AcVi;
prPmProfSetupInfo->ucBmpDeliveryAC =
((prUapsdParam->fgEnAPSD_AcBe << 0) |
(prUapsdParam->fgEnAPSD_AcBk << 1) |
(prUapsdParam->fgEnAPSD_AcVi << 2) | (prUapsdParam->fgEnAPSD_AcVo << 3));
prPmProfSetupInfo->ucBmpTriggerAC =
((prUapsdParam->fgEnAPSD_AcBe << 0) |
(prUapsdParam->fgEnAPSD_AcBk << 1) |
(prUapsdParam->fgEnAPSD_AcVi << 2) | (prUapsdParam->fgEnAPSD_AcVo << 3));
rCmdUapsdParam.ucMaxSpLen = prUapsdParam->ucMaxSpLen;
prPmProfSetupInfo->ucUapsdSp = prUapsdParam->ucMaxSpLen;
#if 0
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_UAPSD_PARAM,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_CUSTOM_OPPPS_PARAM_STRUCT_T),
(PUINT_8) &rCmdUapsdParam, pvSetBuffer, u4SetBufferLen);
#else
return wlanoidSendSetQueryP2PCmd(prAdapter,
CMD_ID_SET_UAPSD_PARAM,
prBssInfo->ucBssIndex,
TRUE,
FALSE,
TRUE,
NULL,
nicOidCmdTimeoutCommon,
sizeof(CMD_CUSTOM_OPPPS_PARAM_STRUCT_T),
(PUINT_8) &rCmdUapsdParam, pvSetBuffer, u4SetBufferLen);
#endif
}
WLAN_STATUS
wlanoidQueryP2pVersion(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
WLAN_STATUS rResult = WLAN_STATUS_FAILURE;
/* PUINT_8 pucVersionNum = (PUINT_8)pvQueryBuffer; */
do {
if ((prAdapter == NULL) || (pu4QueryInfoLen == NULL))
break;
if ((u4QueryBufferLen) && (pvQueryBuffer == NULL))
break;
if (u4QueryBufferLen < sizeof(UINT_8)) {
*pu4QueryInfoLen = sizeof(UINT_8);
rResult = WLAN_STATUS_BUFFER_TOO_SHORT;
break;
}
} while (FALSE);
return rResult;
} /* wlanoidQueryP2pVersion */
#if CFG_SUPPORT_HOTSPOT_WPS_MANAGER
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is used to set the WPS mode.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetP2pWPSmode(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS status;
UINT_32 u4IsWPSmode = 0;
int i = 0;
DEBUGFUNC("wlanoidSetP2pWPSmode");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
if (pvSetBuffer)
u4IsWPSmode = *(PUINT_32) pvSetBuffer;
else
u4IsWPSmode = 0;
for (i = 0; i < KAL_P2P_NUM; i++)/* set all Role to the same value */
if (u4IsWPSmode)
prAdapter->rWifiVar.prP2PConnSettings[i]->fgIsWPSMode = 1;
else
prAdapter->rWifiVar.prP2PConnSettings[i]->fgIsWPSMode = 0;
status = nicUpdateBss(prAdapter, P2P_DEV_BSS_INDEX);
return status;
} /* end of wlanoidSetP2pWPSmode() */
#endif
WLAN_STATUS
wlanoidSetP2pSupplicantVersion(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rResult = WLAN_STATUS_FAILURE;
UINT_8 ucVersionNum;
do {
if ((prAdapter == NULL) || (pu4SetInfoLen == NULL)) {
rResult = WLAN_STATUS_INVALID_DATA;
break;
}
if ((u4SetBufferLen) && (pvSetBuffer == NULL)) {
rResult = WLAN_STATUS_INVALID_DATA;
break;
}
*pu4SetInfoLen = sizeof(UINT_8);
if (u4SetBufferLen < sizeof(UINT_8)) {
rResult = WLAN_STATUS_INVALID_LENGTH;
break;
}
ucVersionNum = *((PUINT_8) pvSetBuffer);
rResult = WLAN_STATUS_SUCCESS;
} while (FALSE);
return rResult;
} /* wlanoidSetP2pSupplicantVersion */
#if CFG_SUPPORT_P2P_RSSI_QUERY
WLAN_STATUS
wlanoidQueryP2pRssi(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryP2pRssi");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (prAdapter->fgIsEnableLpdvt)
return WLAN_STATUS_NOT_SUPPORTED;
*pu4QueryInfoLen = sizeof(PARAM_RSSI);
/* Check for query buffer length */
if (u4QueryBufferLen < *pu4QueryInfoLen) {
DBGLOG(REQ, WARN, "Too short length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
if (prAdapter->fgIsP2pLinkQualityValid == TRUE &&
(kalGetTimeTick() - prAdapter->rP2pLinkQualityUpdateTime) <= CFG_LINK_QUALITY_VALID_PERIOD) {
PARAM_RSSI rRssi;
rRssi = (PARAM_RSSI) prAdapter->rP2pLinkQuality.cRssi; /* ranged from (-128 ~ 30) in unit of dBm */
if (rRssi > PARAM_WHQL_RSSI_MAX_DBM)
rRssi = PARAM_WHQL_RSSI_MAX_DBM;
else if (rRssi < PARAM_WHQL_RSSI_MIN_DBM)
rRssi = PARAM_WHQL_RSSI_MIN_DBM;
kalMemCopy(pvQueryBuffer, &rRssi, sizeof(PARAM_RSSI));
return WLAN_STATUS_SUCCESS;
}
#ifdef LINUX
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_LINK_QUALITY,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryLinkQuality,
nicOidCmdTimeoutCommon,
*pu4QueryInfoLen, pvQueryBuffer, pvQueryBuffer, u4QueryBufferLen);
#else
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_LINK_QUALITY,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryLinkQuality,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
#endif
} /* wlanoidQueryP2pRssi */
#endif