#include "gl_os.h"

#if (CFG_SDIO_1BIT_DATA_MODE == 1)
/*
 *  linux/drivers/mmc/core/core.c
 *
 *  Copyright (C) 2003-2004 Russell King, All Rights Reserved.
 *  SD support Copyright (C) 2004 Ian Molton, All Rights Reserved.
 *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
 *  MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/pagemap.h>
#include <linux/err.h>
#include <linux/leds.h>
#include <linux/scatterlist.h>
#include <linux/log2.h>
#include <linux/regulator/consumer.h>

#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sd.h>
#include <linux/mmc/sdio.h>


#include "test_driver_sdio_ops.h"


/*
 * Internal function that does the actual ios call to the host driver,
 * optionally printing some debug output.
 */
static inline void mmc_set_ios(struct mmc_host *host)
{
	struct mmc_ios *ios = &host->ios;

	pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u timing %u\n",
		 mmc_hostname(host), ios->clock, ios->bus_mode,
		 ios->power_mode, ios->chip_select, ios->vdd,
		 ios->bus_width, ios->timing);

	host->ops->set_ios(host, ios);
}

/*
 * Control chip select pin on a host.
 */
void mmc_set_chip_select(struct mmc_host *host, int mode)
{
	host->ios.chip_select = mode;
	mmc_set_ios(host);
}

/*
 * Sets the host clock to the highest possible frequency that
 * is below "hz".
 */
void mmc_set_clock(struct mmc_host *host, unsigned int hz)
{
	WARN_ON(hz < host->f_min);

	if (hz > host->f_max)
		hz = host->f_max;

	#if 1
	pr_debug("%s(): %dHz\n", __func__, hz);
	#endif

	host->ios.clock = hz;
	mmc_set_ios(host);
}

/*
 * Change the bus mode (open drain/push-pull) of a host.
 */
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
{
	host->ios.bus_mode = mode;
	mmc_set_ios(host);
}

/*
 * Change data bus width of a host.
 */
void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
{
	host->ios.bus_width = width;
	mmc_set_ios(host);
}

/*
 * Mask off any voltages we don't support and select
 * the lowest voltage
 */
u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
{
	int bit;

	ocr &= host->ocr_avail;

	bit = ffs(ocr);
	if (bit) {
		bit -= 1;

		ocr &= 3 << bit;

		host->ios.vdd = bit;
		mmc_set_ios(host);
	} else {
		pr_warn("%s: host doesn't support card's voltages\n",
				mmc_hostname(host));
		ocr = 0;
	}

	return ocr;
}

/*
 * Select timing parameters for host.
 */
void mmc_set_timing(struct mmc_host *host, unsigned int timing)
{
	host->ios.timing = timing;
	mmc_set_ios(host);
}


static void mmc_power_off(struct mmc_host *host)
{
	host->ios.clock = 0;
	host->ios.vdd = 0;
	if (!mmc_host_is_spi(host)) {
		host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
		host->ios.chip_select = MMC_CS_DONTCARE;
	}
	host->ios.power_mode = MMC_POWER_OFF;
	host->ios.bus_width = MMC_BUS_WIDTH_1;
	host->ios.timing = MMC_TIMING_LEGACY;
	mmc_set_ios(host);
}

/*
 * Cleanup when the last reference to the bus operator is dropped.
 */
static void __mmc_release_bus(struct mmc_host *host)
{
	BUG_ON(!host);
	BUG_ON(host->bus_refs);
	BUG_ON(!host->bus_dead);

	host->bus_ops = NULL;
}

/*
 * Increase reference count of bus operator
 */
static inline void mmc_bus_get(struct mmc_host *host)
{
	unsigned long flags;

	spin_lock_irqsave(&host->lock, flags);
	host->bus_refs++;
	spin_unlock_irqrestore(&host->lock, flags);
}

/*
 * Decrease reference count of bus operator and free it if
 * it is the last reference.
 */
static inline void mmc_bus_put(struct mmc_host *host)
{
	unsigned long flags;

	spin_lock_irqsave(&host->lock, flags);
	host->bus_refs--;
	if ((host->bus_refs == 0) && host->bus_ops)
		__mmc_release_bus(host);
	spin_unlock_irqrestore(&host->lock, flags);
}

/*
 * Assign a mmc bus handler to a host. Only one bus handler may control a
 * host at any given time.
 */
void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops)
{
	unsigned long flags;

	BUG_ON(!host);
	BUG_ON(!ops);

	WARN_ON(!host->claimed);

	spin_lock_irqsave(&host->lock, flags);

	BUG_ON(host->bus_ops);
	BUG_ON(host->bus_refs);

	host->bus_ops = ops;
	host->bus_refs = 1;
	host->bus_dead = 0;

	spin_unlock_irqrestore(&host->lock, flags);
}

/*
 * Remove the current bus handler from a host. Assumes that there are
 * no interesting cards left, so the bus is powered down.
 */
void mmc_detach_bus(struct mmc_host *host)
{
	unsigned long flags;

	BUG_ON(!host);

	WARN_ON(!host->claimed);
	WARN_ON(!host->bus_ops);

	spin_lock_irqsave(&host->lock, flags);

	host->bus_dead = 1;

	spin_unlock_irqrestore(&host->lock, flags);

	mmc_power_off(host);

	mmc_bus_put(host);
}

int mmc_app_set_bus_width(struct mmc_card *card, int width)
{
	int err;
	struct mmc_command cmd;

	BUG_ON(!card);
	BUG_ON(!card->host);

	memset(&cmd, 0, sizeof(struct mmc_command));

	cmd.opcode = SD_APP_SET_BUS_WIDTH;
	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;

	switch (width) {
	case MMC_BUS_WIDTH_1:
		cmd.arg = SD_BUS_WIDTH_1;
		break;
	case MMC_BUS_WIDTH_4:
		cmd.arg = SD_BUS_WIDTH_4;
		break;
	default:
		return -EINVAL;
	}

	err = mmc_wait_for_app_cmd(card->host, card, &cmd, MMC_CMD_RETRIES);
	if (err)
		return err;

	return 0;
}

int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
{
	struct mmc_command cmd;
	int i, err = 0;

	BUG_ON(!host);

	memset(&cmd, 0, sizeof(struct mmc_command));

	cmd.opcode = SD_APP_OP_COND;
	if (mmc_host_is_spi(host))
		cmd.arg = ocr & (1 << 30); /* SPI only defines one bit */
	else
		cmd.arg = ocr;
	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;

	for (i = 100; i; i--) {
		err = mmc_wait_for_app_cmd(host, NULL, &cmd, MMC_CMD_RETRIES);
		if (err)
			break;

		/* if we're just probing, do a single pass */
		if (ocr == 0)
			break;

		/* otherwise wait until reset completes */
		if (mmc_host_is_spi(host)) {
			if (!(cmd.resp[0] & R1_SPI_IDLE))
				break;
		} else {
			if (cmd.resp[0] & MMC_CARD_BUSY)
				break;
		}

		err = -ETIMEDOUT;

		mmc_delay(10);
	}

	if (rocr && !mmc_host_is_spi(host))
		*rocr = cmd.resp[0];

	return err;
}

int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
{
	struct mmc_command cmd;
	int err;
	static const u8 test_pattern = 0xAA;
	u8 result_pattern;

	/*
	 * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND
	 * before SD_APP_OP_COND. This command will harmlessly fail for
	 * SD 1.0 cards.
	 */
	cmd.opcode = SD_SEND_IF_COND;
	cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern;
	cmd.flags = MMC_RSP_SPI_R7 | MMC_RSP_R7 | MMC_CMD_BCR;

	err = mmc_wait_for_cmd(host, &cmd, 0);
	if (err)
		return err;

	if (mmc_host_is_spi(host))
		result_pattern = cmd.resp[1] & 0xFF;
	else
		result_pattern = cmd.resp[0] & 0xFF;

	if (result_pattern != test_pattern)
		return -EIO;

	return 0;
}


static int sdio_enable_wide(struct mmc_card *card)
{
	int ret;
	u8 ctrl;

	if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
		return 0;


	if (card->cccr.low_speed && !card->cccr.wide_bus)
		return 0;


	ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
	if (ret)
		return ret;


	if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
		pr_warn("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
			mmc_hostname(card->host), ctrl);

	/* set as 4-bit bus width */
	ctrl &= ~SDIO_BUS_WIDTH_MASK;
	ctrl |= SDIO_BUS_WIDTH_4BIT;

	ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
	if (ret)
		return ret;

	return 1;
}


/*
 * Devices that remain active during a system suspend are
 * put back into 1-bit mode.
 */
int sdio_disable_wide(struct mmc_card *card)
{
	int ret;
	u8 ctrl;

	if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
		return 0;


	if (card->cccr.low_speed && !card->cccr.wide_bus)
		return 0;


	ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
	if (ret)
		return ret;


	if (!(ctrl & SDIO_BUS_WIDTH_4BIT))
		return 0;


	ctrl &= ~SDIO_BUS_WIDTH_4BIT;
	ctrl |= SDIO_BUS_ASYNC_INT;

	ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
	if (ret)
		return ret;


	mmc_set_bus_width(card->host, MMC_BUS_WIDTH_1);

	return 0;
}


int sdio_enable_4bit_bus(struct mmc_card *card)
{
	int err;

	if (card->type == MMC_TYPE_SDIO)
		return sdio_enable_wide(card);


	if ((card->host->caps & MMC_CAP_4_BIT_DATA) &&
		(card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {

		err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
		if (err)
			return err;
	} else
		return 0;


	err = sdio_enable_wide(card);
	if (err <= 0)
		mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1);

	return err;
}
#endif